Pelco Integrated Camera System Ics Do101Abk Users Manual

ICS-DO101ABK to the manual e7a46e91-6523-4bcd-a159-a196a097e80b

2015-02-02

: Pelco Pelco-Pelco-Integrated-Camera-System-Ics-Do101Abk-Users-Manual-441080 pelco-pelco-integrated-camera-system-ics-do101abk-users-manual-441080 pelco pdf

Open the PDF directly: View PDF .
Page Count: 12

Installation/Operation

ICS-DO101ABK

Integrated Camera System for

the MR5000 Series Public View System

C2436M-B (9/02)

Pelco

• 3500 Pelco Way • Clovis, CA 93612-5699 USA •

www.pelco.com

In North America and Canada:

Tel (800) 289-9100 • FAX (800) 289-9150

International Customers:

Tel +1(559) 292-1981 • FAX +1(559) 348-1120

[ 2 ] Pelco Manual C2436M-B (9/02)

Pelco Manual C2436M-B (9/02) [ 3 ]

TABLE OF CONTENTS

IMPORTANT SAFEGUARDS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ADJUSTMENTS (COLOR CAMERA ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

VERTICAL PHASE (24 VAC OPERATION ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

AUTO IRIS LEVEL ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS . . . . . . . . . . . . . . 9

SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS . . . . . . . . . . . . . . . . 9

SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITHOUT AUTO IRIS . . . . . . . . . . . 10

SWITCH SETTINGS FOR VARIFOCAL LENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

REGULATORY NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

WARRANTY AND RETURN INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

[ 4 ] Pelco Manual C2436M-B (9/02)

Pelco Manual C2436M-B (9/02) [ 5 ]

IMPORTANT SAFEGUARDS AND WARNINGS

DESCRIPTION

Designed specifically for the MR5000 Series Public View System, the ICS-DO101ABK Integrated Camera

System packages a camera and lens into a small, discreet, high-security dome.

Pelco’s MR5000 Public Viewing Station is specifically designed for retail applications to provide a clear,

visual warning to potential shoplifters that these premises are under surveillance. When properly installed

the station is an effective deterrent against shoplifting.

INSTALLATION

1. Installation and servicing should only be done by qualified service personnel and conform to all local

codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is

designed for indoor use only and must not be installed where exposed to rain and moisture.

3. Use only installation methods and materials capable of supporting four times the maximum specified

load.

IMPORTANT

To maximize

tamper

resistance

when not

using the

side conduit

opening for wire

connections, verify that the

conduit plug and set screw are tight.

Attach Adapter Plate to Base of ICS-DO101ABK

1. Align the adapter plate to the base of the ICS-DO101ABK.

2. Using the two 10-32 x .375-inch pan head screws and internal lock washers, attach the base of

the ICS-DO101ABK to the adapter plate.

[ 6 ] Pelco Manual C2436M-B (9/02)

3 Connect Video and Power

1. Connect the video cable. Place the cable inside the MR5000 Series mount arm and install the

bottom end cap of the mount to conceal the cable.

2. Depending on the input voltage, connect either the 12 VDC or 24 VAC input power wires to

the appropriate positions on the terminal block inside the base.

12 VDC Operation Only –

The camera is set for 24 VAC operation at the factory. For 12 VDC operation remove the jumper

from the 24 VAC position and install it on the 12 VDC position.

2 Prepare Video and Electrical Cabling

1. Temporarily remove the bottom end cap of

the MR5000 Series mount if it is installed.

2. Feed the 42-inch video cable (provided)

through the monitor feedthrough hole in the

mount arm and out the bottom end of the

mount arm.

3. Pull power wires through the ICS-DO101ABK

feedthrough located at the bottom of the

mount arm. Remove the .50-inch plug

if it is installed.

4. Pull wires through the adapter plate of the

ICS-DO101ABK and into the base of the

ICS-DO101ABK.

5. Use the supplied 3/16-inch Allen wrench and slightly loosen

(do not remove)

the two

5/16-18 x .75-inch Allen pan head screws that secure the MR5000M mount base to the mount arm.

6. Feed the video cable attached to the ICS-DO101ABK back box through the ICS-DO101ABK

feedthrough in the mount arm and out the bottom end of the mount arm.

7. Hook the adapter plate over the loosened screws. Tighten the screws to secure the adapter plate

to the mount.

Pelco Manual C2436M-B (9/02) [ 7 ]

4 Install Camera

1. Some indoor installations do not require a

heater. If the installation does not require a

heater, remove the heater board from the cam-

era assembly. To remove the heater apply

pressure and press on the corner of the

board.

2. If the heater is installed, plug the heater con-

nector from the camera into the mating con-

nector inside the base. Plug the video con-

nector from the camera into the mating

connector inside the base.

Turn on power to the camera and monitor.

3. If you have a varifocal lens, hold the assem-

bly in your hand and point the lens toward

what you want to view. Loosen the focal

length and focus locking screws. Adjust ac-

cording to scene detail. Retighten the screws.

4. Always make sure the tab on the camera

bracket is pointing out of the enclosure (away

from the mount). Gently squeeze the bracket,

place it against the shoulder inside the base,

and gently release.

Proper camera orientation: The camera

bracket tab points out of the enclosure and

the top of the camera is pointed in the oppo-

site direction.

Heater elements could be hot! When camera power is on, use caution when

adjusting the camera. This applies to all models.

CAUTION

[ 8 ] Pelco Manual C2436M-B (9/02)

ADJUSTMENTS (COLOR CAMERA ONLY)

If you have a color camera, it is set up at the factory and normally requires no adjustments. Sometimes,

however, adjustments may be necessary.

1. Remove the dome and trim ring using the supplied 1/8-inch hollow screwdriver bit.

2. Adjust the vertical phase, iris level, focus, or switch settings

(refer to procedures below).

3. Replace the dome and trim ring.

5 Install Dome and

Trim Ring

1. Align the screw holes in the trim ring with

those in the camclosure base.

2. Domes with Liners (only) –

Position the viewing window over the lens of the camera.

a. Loosen the three Phillip screws located in the dome.

b. Insert the blade of a standard screwdriver in one of the

adjustment grooves. Move dome into position.

c. Tighten the three Phillip screws to lock liner in place.

3. Tighten the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit.

LOOSEN SCREWS

ADJUSTMENT

GROOVE

DOME LINER

Ver tical Phase

(24 VAC Operation Only)

Adjustment is required if there is vertical roll when switching

between two cameras.

1. Reverse the 24 VAC connections on one camera. If both

cameras are connected to the same transformer, this should

solve the problem.

2. If reversing the connections does not solve the problem, or if

cameras are connected to different transformers, turn the adjust-

ment screw on one camera (while switching as rapidly as possible

between the two camera views) until the switching is clean and

there is no vertical roll. If more than two cameras are out of syn-

Auto Iris Level Adjustment

If you have a varifocal lens or fixed focal length lens

with an auto iris, you can adjust the level setting to

increase or decrease brightness.

Pelco Manual C2436M-B (9/02) [ 9 ]

Focus Adjustment for Fixed Focal Length Lens

with Auto Iris

To adjust the focus, it may be necessary to remove the heater board in order to loosen the locking screw

on the bottom of the lens.

To remove the heater board:

1. Disconnect the four-pin heater wiring.

2. Wait for the heater elements to cool if they are hot.

3. Apply pressure and press on the corner of the board.

To adjust the focus:

1. Loosen the locking screw on the bottom of the lens.

2. Move the screw in the slot to bring the picture into focus.

3. Retighten the locking screw.

4. Replace the heater board if it was removed.

5. Reconnect the four-pin heater wiring.

Heater elements could be hot! When camera power is on, use caution when

adjusting the camera.

CAUTION

Switch Settings for Fixed Focal Length Lens

with Auto Iris

Refer to the switch drawing. The switch is located next to the lens. Automatic backlight compensation

(factory setting) is used under varying lighting conditions (such as outdoors) or fixed lighting conditions

where there are no bright spots that darken other picture details. Manual backlight compensation is used

in fixed lighting conditions to optimize the picture detail when there are bright spots.

ALC/ELC switch: Always ALC

Y/DC switch: Always DC

Auto backlight compensation: BLC switch OFF

ABL switch ON

Manual backlight compensation: BLC switch ON

ABL switch OFF

= SWITCH POSITION

FACTORY SETTINGS

OFF

ALC

BLC

ABL

ELC

OFF

FOCUS

ADJUSTMENT

SCREW

ADJUSTMENT

SLOT

BOTTOM VIEW OF CAMERA WITH

HEATER BOARD REMOVED

[ 10 ] Pelco Manual C2436M-B (9/02)

Switch Settings for Varifocal Lens

The high resolution camera with

varifocal lens and auto iris is

configured at the factory for

optimal performance in lighting

conditions where auto iris is

required. It is also configured with

the shutter speed set at 1/60

(NTSC) or 1/50 (PAL) and AGC

set at 6 dB of gain.

To enable automatic exposure

Turn on switch 7, and then turn on/off switch 4 for

electronic shutter control, switch 5 for backlight

compensation, and switch 6 for flickerless

motion.

To manually set and lock AWB

Place a white background in front of camera and

turn off switch 1.

For gamma correction

Switch to accurately reproduce scene brightness;

when turned on, y = 0.6, and when turned off,

y = 1.0.

For gain control

Switch 3 On increases gain by 6 dB, and switch 3

Off increases gain by 18 dB.

CAUTION

Do not change the shutter speed

unless you understand how changing the settings

will affect the scene detail.

Shutter Switch Number and Position

Speed 7 6 5 4

1/60 (NTSC)

1/50 (PAL)

1/100 Off On On

1/250 On Off On

1/500 Off Off On

1/1000 On On Off

1/2000 Off On Off

1/4000 On Off Off

1/10000 Off Off Off

Off

On On On

12345678

OFF

FACTORY SETTINGS

= SWITCH POSITION

1AWB Automatic white balance

2GAM Gamma function

3AGC Automatic gain control

4ESC Electronic shutter control

5BLC Backlight compensation

6FL Flickerless

7AE Automatic exposure

8Not used

AE Functions

To enable auto iris and manually set

shutter speed

Turn off switch 7; set switches 4, 5, and 6 for the

desired shutter speed.

NOT USED

= SWITCH POSITION

FACTORY SETTINGS

ALC

BLC

ABL

ELC

OFF

Switch Settings for Fixed Focal Length Lens

Without Auto Iris

Refer to the switch drawing. The switch is located next to the lens. Automatic backlight compensation

(factory setting) is used under varying lighting conditions (such as outdoors) or fixed lighting conditions

where there are no bright spots that darken other picture details. Manual backlight compensation is used

in fixed lighting conditions to optimize the picture detail when there are bright spots.

ALC/ELC switch: Always ELC

Y/DC switch: Not used

Auto backlight compensation: BLC switch OFF

ABL switch ON

Manual backlight compensation: BLC switch ON

ABL switch OFF

Pelco Manual C2436M-B (9/02) [ 11 ]

SPECIFICATIONS

Electrical

Input Voltage: 12 VDC or 24 VAC, ±10%

Power

Consumption: 13 watts or less

Video

Connector: BNC

Operating

Temperature: -50° to 122°F (-46° to 50°C)

De-ices to -10°F (-23°C)

General

Cable Entry: 3/4-inch (1.91 cm) conduit fitting

and 3/4-inch (1.91 cm) opening

for NPT threaded pipe

Pan/Tilt

Adjustment: Manual; 360° pan; 180° tilt

Ratings: NEMA 4, IP 66 when installed

properly

UL/cUL

Construction: Aluminum with steel camera

mounting bracket and polycar-

bonate dome

Finish: Gray polyester powder coat

Dimensions

Base: 3.70 (H) x 5.30 (W) inches

(9.40 x 13.50 cm)

Bubble: 3.75-inch diameter

Environment: Low temperature,

indoor/outdoor

Unit Weight: 2.20 lb (1.00 kg)

Regulatory Notices

FCC Class A (monochrome, EIA cameras only)

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to cor-

rect the interference at his own expense.

FCC Class B (color, NTSC cameras only–except varifocal)

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try and correct the interfer-

ence by one or more of the following measures:

• Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

(Design and product specifications subject to change without notice.)

[ 12 ] Pelco Manual C2436M-B (9/02)

REVISION HISTORY

Manual # Date Comments

C2436M 9/01 Original version.

C2436M-A 7/02 Added instructions for fixed lens with auto iris.

C2436M-B 9/02 Revised installation instructions – bracket and camera assembled at factory. Added iris level

adjustment for fixed lens with auto iris.

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of

shipment.

Exceptions to this warranty are as noted below:

• Five years on FT/FR8000 Series ﬁber optic products.

• Three years on Genex

Series products (multiplexers, server, and keyboard).

•Three years on Camclosure

and ﬁxed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and

MC3651H-2X camera models, which have a ﬁve-year warranty.

•Two years on standard motorized or ﬁxed focal length lenses.

•Two years on Legacy

, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series ﬁxed dome products.

•Two years on Spectra

, Esprit

, ExSite

™

, and PS20 scanners, including when used in continuous motion applications.

•Two years on Esprit

and WW5700 Series window wiper (excluding wiper blades).

•Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and Endura

™

Series distributed network-based video

products.

• One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.

• Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight

prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this

warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the speciﬁc use or application made of the Products. Pelco’s

liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products

shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential

damages (including loss of use, loss of proﬁt and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with speciﬁc legal rights. The Dealer may also have additional rights, which are subject to variation from state

to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and

provide the following information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written

explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization

number (CA number if returned for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identiﬁed with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate

address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:

Service Department

Pelco

3500 Pelco Way

Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the

following:

If the goods are to be sent by a COURIER SERVICE, send the goods to:

Pelco

3500 Pelco Way

Clovis, CA 93612-5699 USA