Pelco Pisitioning System Es40 Users Manual ES41 Series Positioning Esprit SE |

ES41 to the manual aec79d40-d6b3-4a65-8e22-ca94db1bcda7

: Pelco Pelco-Pisitioning-System-Es40-Users-Manual-441529 pelco-pisitioning-system-es40-users-manual-441529 pelco pdf

Open the PDF directly: View PDF .
Page Count: 4

PRODUCT SPECIFICATION camera solutions

ES40/ES41 Series Positioning System

ESPRIT® SE STANDARD AND PRESSURIZED MODELS

Product Features

• Receiver, Pan/Tilt, and Enclosure with Integrated Optics Package (IOP)

or Pressurized Integrated Optics Cartridge (IOC), NTSC/PAL

• Day/Night, 540 TVL, Autofocus, 128X Wide Dynamic Range (WDR),

Motion Detection, Image Enhancement, and Electronic Image

Stabilization

• Integrated Window Wiper with Configurable Delay and Shut-Off

(ES41 Models)

• Preset Positioning Accuracy ±0.1, Variable Speed Pan: 0.1° to

100°/Sec with Proportional Pan

• Window Blanking, Multishaped

• Internal Scheduling Clock

• On-Screen Compass, Tilt, and Zoom Display

• Autotracking

• Tilt Range of +36° to –85° from Horizontal

• Password Protection

Pelco’s ES40/ES41 Esprit® SE Positioning System features a

receiver, pan/tilt, enclosure, and either an Integrated Optics Package

(IOP) or a pressurized Integrated Optics Cartridge (IOC) in a single,

easy-to-install system. Options include IOP or IOC models with or

without wiper.

For a wide range of applications, the ES40/ES41 Series offers a high

resolution, color/black-white camera (540 TVL) with an infrared cut

filter, 432X zoom (36X optical, 12X digital), electronic image

stabilization, and wide dynamic range. A powder-coated, aluminum

construction makes the ES40/ES41 Series ideal for either indoor or

outdoor applications. The system has an absolute operating

temperature range of –45° to 50°C (–50° to 122°F). Within two hours

after power-up, the entire unit can de-ice and be operational from a

temperature of –25°C (–13°F).

The ES40/ES41 Series variable pan and tilt speeds range from 0.1 to

40 degrees per second in manual pan mode, and 0.1 to 20 degrees per

second in manual tilt. Pan preset and turbo speeds are 100 degrees

per second in wind speeds of 80 kph (50 mph) and 50 degrees per

second in the 145 kph (90 mph) wind-speed profile. Tilt preset speed

is 30 degrees per second. The ES40/ES41 Series is capable of

360 degrees of continuous pan rotation. The tilt range allows for

horizontal viewing of +36 to –85 degrees. There are 256 configurable

preset positions with a preset accuracy of 0.1 degree.

ESPRIT SE IOP SYSTEM WITH WIPER

(SHOWN WITH WALL MOUNT AND POLE ADAPTER)

The ES40P/ES41P system’s IOC contains dry nitrogen pressurized to

10 psig, which protects the environment inside the cartridge

eliminating internal condensation and corrosion. Sensors

strategically placed in the cartridge send an “Alert” message if

changes in pressure, temperature, and humidity are beyond factory-

set acceptable limits. The sensors also allow for instant on-screen

display of temperature, pressure, and dew point. The IOC is factory

assembled and installed in the ES40P/ES41P systems. All labor

intensive procedures of setting up the camera, lens and charging the

unit with dry nitrogen are eliminated. The miniature size of the

cartridge decreases the future need for maintenance and increases

the overall reliability of the pressurized unit.

The ES41 Series includes a window wiper. The wiper is completely

integrated into the enclosure and does not interfere with the viewing

range of the system. The wiper can be configured to delay between

wipes and to automatically shut off after a specified period. The wiper

design also allows for easy replacement of the wiper blade. A built-in

heater, window defroster/defogger, sun shroud, and insulation

blanket are standard features on the ES40/ES41 units, which also

include open collector auxiliary outputs that function for two seconds

before deactivating.

The systems are available with an input voltage of 24 VAC or with a

selectable power source of 120/230 VAC. The ES40/ES41 Series also

has a power-up recovery mode that allows the user to specify what

operation the system will resume whenever the power is cycled.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1323 / NEW 6-5-12

TECHNICAL SPECIFICATIONS

ADDITIONAL PRODUCT FEATURES

• Deterrent Surveillance

• Integral Multiprotocol (Coaxitron®, RS-422 Pelco D and Pelco P Protocols)

Receiver/Driver

• Digital Position and Zoom Control and Feedback Using Pelco D Protocol

• Integral Camera Enclosure

• Operational in 145 kph (90 mph) Winds, Can Withstand Wind Velocity up

to 209 kph (130 mph)

• Pan Preset Speed of 100°/Sec in 80 kph (50 mph) Winds and 50°/Sec in

145 kph (90 mph) Winds

• Variable Scan Speeds (1° to 40°/Sec)

• Translator Boards for Selected Competitive Protocols

• Easy to Install: Quick and Simple Electrical Connections

• 24 VAC or 120/230 VAC Selectable

• Full Continuous-Duty Warranty

• 850 nm and 950 nm Active IR Illumination Focus Algorithms

• 256 Configurable Presets with Labels

• Auto, Frame, and Random Scan

• Configurable Power-Up Mode, Park, Manual Limit Stops (Pan), and Scan

Limit Stops (Pan)

• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;

Includes Pan, Tilt, Zoom, and Preset Functions

• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion

to Depth of Zoom

• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters

Each

• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes

• 10-Inch Integrated Enclosure with Pre-Assembled IOP Camera

• Sun Shroud, Heater/Window Defroster, and Insulation All Standard

• 1 Auxiliary Output

• Electronic Image Stabilization

• Image Enhancement

• Multilingual Menus (English, Spanish, Portuguese, Italian, French,

German, Russian, Polish, Turkish, Czech, and Asian language package:

Chinese, Japanese, Korean)

• Software Update and Setup

• Configurable Locations of Labels and On-Screen Displays

• Configurable Zoom Speeds

• Low Lux Noise Reduction (reduces noise in low light)

• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,

Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional

Translator Card

PRESSURIZED INTEGRATED OPTICS CARTRIDGE (IOC)

• Pressurized to 10 psig, Nominal (Sea Level, 21°C [70°F])

• Internal Sensors for Temperature, Dew Point, and Pressure

• On-Screen Alert for High and Low Temperature, High and Low Pressure,

and High Humidity

• 4 Alert On-Screen Display Modes

• 4 Acknowledge Modes

• Pressurized Relief Valve

• Meets IP67 Standards

ELECTRICAL

Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch

selectable for 120/230 VAC inputs

Input Voltage Range ±10%

Power Consumption Maximum 70 VA per system

Heater and Defroster Thermostatically controlled

Electrical Connections 2 power source connections made at mount

location with wire splices and 1 ground wire

splice; 1 BNC receptacle and 4 wire splices at

mount location for RS-422 Pelco D and Pelco P

protocols; 2 wire splices for open collector

auxiliary output

Aux 2 Open collector output with 2-second

activation; connected relay must require no

more than 32 VDC and 40 mA to energize relay

coil; wire length between Esprit SE and relay

must be less than 30 m (100 ft)

Video Coaxial Cable

Wiring Distances Cable Type* Maximum Distance

RG59/U 229 m (750 ft)

RG6/U 305 m (1,000 ft)

RG11/U 457 m (1,500 ft)

*Minimum cable requirements: 75-ohms impedance; all copper center

conductor; all copper braided shield with 95% braid coverage.

MECHANICAL

Pan Movement 360° Continuous pan rotation

Vertical Tilt Unobstructed +36° to –85°

Variable Pan/Tilt Speed

Pan 0.1° to 40°/sec variable-speed operation,

100°/sec turbo

Tilt 0.1° to 30°/sec variable-speed operation

Preset Speeds

Pan 100°/sec

Tilt 30°/sec

Camera Mounting Integrated camera sled assembly

Latches One link-lock, No. 3 stainless-steel latch; can

be secured with padlock (not supplied)

GENERAL

Construction Die-cast, extruded and sheet aluminum;

stainless steel hardware

Finish Gray polyester powder coat

Viewing Window 5.84 mm (0.23") thick, optically clear,

polycarbonate with proprietary impact-

resistant UV rated coating

Operating Temperature –45° to 50°C (–50° to 122°F) for sustained

system operation or 60°C (140°F) absolute

maximum; within two hours after power-up,

the entire unit can de-ice and be operational

from a temperature of –25°C (–13°F)

Operating Environment Will remain operational in 145 kph (90 mph)

wind conditions;

withstands 209 kph (130 mph)

Weight With With

Pedestal Adapter Wall Mount

Unit

Standard with IOP 9.0 kg (20 lb) 9.9 kg (22 lb)

With Wiper and IOP 9.5 kg (21 lb) 10.4 kg (23 lb)

Standard with IOC 9.5 kg (21 lb) 10.4 kg (23 lb)

With Wiper and IOC 10.0 kg (22 lb) 11.0 kg (24 lb)

Shipping

Standard with IOP 11.3 kg (25 lb) 12.6 kg (28 lb)

With Wiper and IOP 11.7 kg (26 lb) 13.1 kg (29 lb)

Standard with IOC 11.7 kg (26 lb) 13.1 kg (29 lb)

With Wiper and IOC 12.3 kg (27 lb) 13.6 kg (30 lb)

TECHNICAL SPECIFICATIONS

CAMERA/OPTICS

Signal Format NTSC, PAL

Scanning System Progressive or 2:1 interlace

Image Sensor 1/4-inch CCD

Effective pixels

NTSC 768 (H) x 494 (V)

PAL 752 (H) x 582 (V)

Horizontal Resolution >540 TV lines

Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)

Zoom 36X optical, 12X digital

Zoom Speed (optical range) 3.2/4.6/6.6 seconds

Horizontal

Angle of View 57.2° at 3.3 mm wide zoom;

1.7° at 119 mm telephoto zoom

Focus Automatic with manual override

Maximum Sensitivity

at 35 IRE

NTSC 0.02 lux at 1/2 sec shutter

0.55 lux at 1/60 sec shutter (color)

0.018 lux at 1/2 sec shutter (color)

0.00018 lux at 1/2 sec shutter (B-W)

PAL 0.02 lux at 1/1.5 sec shutter

0.45 lux at 1/50 sec shutter (color)

0.015 lux at 1/1.5 sec shutter (color)

0.00015 lux at 1/1.5 sec shutter (B-W)

Sync System AC line lock, phase adjustable using remote

control, V-Sync

White Balance Automatic with manual override

Shutter Speed Automatic manual

NTSC 1/2 ~ 1/30,000

PAL 1/1.5 ~ 1/30,000

Iris Control Automatic with manual override

Gain Control Automatic/OFF

Video Output 1 Vp-p, 75 ohms

Video Signal-to-Noise Ratio >50 dB

Electronic Image Stabilization Integrated

Wide Dynamic Range 128X

CERTIFICATIONS/RATINGS/PATENTS

IOP MODELS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• C-Tick

• Meets NEMA Type 4X and IP66 standards

• U.S. Patents 340,940 and 5,224,675

IOC MODELS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• C-Tick

• Meets NEMA Type 4X and IP66 standards

• Meets IP67 standards (Pressurized IOC)

• U.S. Patent D472,260

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

13.3 33.9

(5.2) (13.3)

9.9

(3.9)

44.3

37.0

(17.5)

(14.6)

24.9

(9.8)

19.7 20.0

(7.7) (7.9)

9.1

(3.6)

MODEL NUMBERS

MODELS

Enclosure Type Signal

Format

Pedestal Mount* Wall Mount†

24 VAC 120/230 VAC 24 VAC 120/230 VAC

Standard with IOP NTSC

PAL

ES4036-2N

ES4036-2N-X

ES4036-5N

ES4036-5N-X

ES4036-2W

ES4036-2W-X

ES4036-5W

ES4036-5W-X

With Wiper with IOP NTSC

PAL

ES4136-2N

ES4136-2N-X

ES4136-5N

ES4136-5N-X

ES4136-2W

ES4136-2W-X

ES4136-5W

ES4136-5W-X

Standard with IOC NTSC

PAL

ES40P36-2N

ES40P36-2N-X

ES40P36-5N

ES40P36-5N-X

ES40P36-2W

ES40P36-2W-X

ES40P36-5W

ES40P36-5W-X

With Wiper with IOC NTSC

PAL

ES41P36-2N

ES41P36-2N-X

ES41P36-5N

ES41P36-5N-X

ES41P36-2W

ES41P36-2W-X

ES41P36-5W

ES41P36-5W-X

*Pedestal mount models include Esprit EPP pedestal adapter plate. Use with PM2000/PM2010 mount (not supplied) for

pedestal application.

† Wall mount models include Esprit EWM wall mount. Optional mounting adapters for corner, pole, and parapet

applications are available.

REPLACEMENT INTEGRATED OPTICS PACKAGE (IOP)

The following IOP modules are replacement components only; they are not

interchangeable.

ESIOP36 Esprit high resolution day/night camera and

lens module, 36X, NTSC format

ESIOP36-X Same as ESIOP36 except PAL format

REPLACEMENT PRESSURIZED INTEGRATED OPTICS

CARTRIDGE (IOC)

The following IOC models are replacement components only; they are not

interchangeable.

IOC-36 Esprit high resolution day/night camera and

lens module, 36X, NTSC format

IOC-36-X Same as IOC-36 except PAL format

OPTIONAL ACCESSORIES

ES-REPLBLADE-2 Package of 2 window wiper replacement

blades.

ES-REPLBLADE-10 Package of 10 window wiper replacement

blades.

IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount

video/data breakout box. Allows ground-level

control/configuration when used with the

IPS-CABLE. (No code upload.)

IPS-CABLE Kit consisting of the remote monitor interface

cable and necessary software for use with

a PC

TXB Series Translator boards for AD™ Manchester,

Hernis, Bosch® (Philips, Burle), Sensormatic®,

TASS, Vicon™, and NTCIP protocols.

OPTIONAL MOUNTS AND ADAPTERS

ECM100 Corner mount adapter for use with EWM wall

mount

EPM Pole mount adapter for use with EWM wall

mount

EA4348 EWM-to-Legacy adapter; use with PP4348

parapet mount

PM2000/PM2010 Pedestal mount with cable feedthrough.

For use with Esprit systems with EPP pedestal

adapter plate.

RECOMMENDED POWER SUPPLIES

MCS Series Multiple 24 VAC camera power supply, indoor

WCS Series Single/multiple 24 VAC camera power supply,

outdoor

FACTORY INSTALLED

RECEIVER/DRIVER

TRANSFORMER

MODULE

MEETS NEMA TYPE 4X/IP66

ENCLOSURE STANDARDS

OPTIONAL FACTORY

INSTALLED WIPER

MECHANISM

INTEGRATED OPTICS PACKAGE (IOP) OR

PRESSURIZED INTEGRATED OPTICS

CARTRIDGE (IOC) IP67

Contract #GS-07F-9323S

Pelco by Schneider Electric Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

3500 Pelco Way, Clovis, California 93612-5699 United States to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 product names and services are the property of their respective companies.

International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 Product specifications and availability are subject to change without notice.

www.pelco.com ©Copyright 2012, Pelco, Inc. All rights reserved.