Pelco Spectra C3463M B Users Manual Pelco_Spectra_IV_Series_manual

SPECTRA C3463M-B Spectra IV SL-SE Installation_c3463m-b

C3463M-B to the manual af054269-135e-4129-95c6-e948fb69a843

2015-02-02
: Pelco Pelco-Spectra-C3463M-B-Users-Manual-441536 pelco-spectra-c3463m-b-users-manual-441536 pelco pdf
Open the PDF directly: View PDF .
Page Count: 72
Download
Open PDF In Browser	View PDF
INSTALLATION/OPERATION

Spectra IV SL and
Spectra IV SE Series
®

23X, 27X, and 35X Dome Drives

C3463M-B (2/11)

Contents
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switch Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SW1: Receiver Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SW2 Switch 1: AD-32 Preset System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SW2 Switch 2: CM9502 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SW2 Switch 3: Control System Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SW2 Switches 4 and 5: Serial Port Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SW2 Switches 6 to 8: Baud Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dome Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Quick Operation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Quick Configuration Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Preset 95: Accessing Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CM6700/CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
KBD200A/KBD300A: Direct Mode Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CM9500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CM9740/CM9760/CM9770/CM9780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
KBD4000/KBD4002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MPT9500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NET300/NET350/NET4001A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Endura Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VCD5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DX4100/DX4500/DX4600/DX8100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Digital Sentry® System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Digital Sentry DS ControlPoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DVR5100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
23X LowLight Day/Night Menu Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
27X LowLight Day/Night Menu Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
35X LowLight Day/Night Menu Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DIP Switch Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Display Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Label Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Dome Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Type of Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Zoom Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Zoom Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Low Light Limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
IR Cut Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Advanced Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AGC Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Auto White Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Backlight Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Electronic Image Stabilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Wide Dynamic Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Low Lux Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Video Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
C3463M-B (2/11)

3

Field Align . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Low Light Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Minimum Focus Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Motion Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Flip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Proportional Pan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Park Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Scan Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Preset Freeze Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Limit Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Azimuth Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Auto Tracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Display Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Start Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lost Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Return. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Power Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Power Up Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Line Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Motion Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Edit Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Patterns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Window Blanking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Edit Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Clear Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Blank All Above/Blank All Below . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Aux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Edit Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Title Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Ack Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Activate Aux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Current Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Reset Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Event Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Event Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Edit Event Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Edit Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Clear Event. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
List Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Holiday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Edit Holiday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Clear Holiday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
List Holidays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Scheduled Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Reset, Cycle Power, Reboot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Reset Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cycle Camera Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Reboot System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4

C3463M-B (2/11)

Software/Language File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
23X Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
27X Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
35X Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

C3463M-B (2/11)

5

Description
Spectra® IV SL and Spectra IV SE are Pelco’s premier integrated dome systems. These systems feature a high resolution camera/optics package
with configurable dome drive software.
This manual is designed primarily to be a reference tool for the installation and operation of your system. Inside you will find information about
features and commands, as well as a detailed menu tree and a quick start guide.
Be sure to thoroughly familiarize yourself with the information in this manual before installing and using your system.

6

C3463M-B (2/11)

Installation
This manual contains installation instructions for the Spectra IV dome drive only. For complete installation instructions for a Spectra IV dome
system, refer to the installation manual that was shipped with the back box.

SWITCH SETTINGS
Before installing the dome drive, you must configure the receiver address, termination, and baud setting. The DIP switches used to configure
these settings are located on the base of the dome drive.
Figure 1 shows the default settings for the DIP switches. Switch SW1-1 (SW1, switch 1) is set to the ON position; all other switches are set to
the OFF position.
Refer to the following sections to set the address, termination, and baud settings for the dome drive.

ON

SW2
1

2

3

4

5

6

7

8 9 10

3

4

5

6

7

8

ON

SW1
1

2

Figure 1. Default Switch Settings

SW1: RECEIVER ADDRESS
Set the SW1 switches for the address of the dome drive. The following information is required to set the dome drive address:
Pelco P-type control: The default address is 2. Refer to Table F on page 64 for address settings that use Pelco P-type control. The maximum
number of receivers is 32.
Pelco D-type control: The default address is 1. Refer to Table G on page 65 for address settings that use Pelco D-type control. The maximum
number of receivers is 254.

SW2 SWITCH 1: AD-32 PRESET SYSTEM
SW2-1 should be set to the ON position if an AD-32 controller and Pelco’s TXB-AD translator board are used to control the dome system.

SW2 SWITCH 2: CM9502 SETTING
If a CM9502 matrix system is used with the dome drive, set SW2-2 to the ON position.

SW2 SWITCH 3: CONTROL SYSTEM COMPATIBILITY
Coaxial Control Systems
Although Spectra IV dome systems can operate with coaxial control systems from many manufacturers, the system is designed for optimal
performance with Pelco Coaxitron® control products within the length specified for coaxial cable.
To compensate for coaxial control systems from other manufacturers, Pelco has provided DIP switch SW2-3. Setting SW2-3 to the ON position
may improve dome control with these control systems.
If you are using a Pelco Coaxitron controller, leave SW2-3 in the default OFF position.
NOTES:
•

This coaxial control system compatibility feature is only available for dome drive revisions A4 and later (revisions A0 and later for Spectra
IV Horizon dome drives). The revision number can be found on the barcode label on the top of the dome drive. Software version 1.090 and
later indicates this mode is available by placing an asterisk next to the switch number in the Dip Switch Information menu.

•

In some configurations, Pelco CM9502 Series matrix systems use nonstandard Coaxitron commands for functions like pattern playback. If
you experience problems with these functions, set SW2-3 to the ON position.

C3463M-B (2/11)

7

Pelco P Protocol Control Systems
To compensate for Pelco P protocol control systems from other manufacturers, set SW2-3 to the ON position. This may improve dome control
with some of these control systems.

SW2 SWITCHES 4 AND 5: SERIAL PORT SETTINGS
RS-422 Setting (Default)
SW2-4 and SW2-5 should both be set to the OFF position for RS-422 setting.
For control, only two wires should be connected to the RX- and RX+ connectors on the circuit board inside the back box. For bidirectional control,
four wires should be connected to the RX-, RX+, TX-, and TX+ connectors on the circuit board inside the back box.

RS-485, 4-Wire Setting
SW2-4 should be set to OFF and SW2-5 should be set to ON if a 4-wire serial port connection is used with RS-485.
NOTE: This setting is most commonly used with Pelco Endura® systems.

RS-485, 2-Wire Setting
SW2-4 and SW2-5 should both be set to the ON position if a 2-wire serial port connection is used with RS-485.
This setting is used to allow the Spectra dome system to transmit and receive commands on the same pair of wires. Only two wires should be
connected to the RX- and RX+ connectors on the circuit board inside the back box.

SW2 SWITCHES 6 TO 8: BAUD SETTINGS
Pelco D-type controllers are set for 2400 baud. The default setting for the dome drive is 2400 baud. If you are using a Pelco D-type controller, do
not reset SW2 switches 1 to 3 or SW2 switches 6 to 8.
Pelco P-type controllers can operate at 2400, 4800, and 9600 baud. Set the SW2 switches (6, 7, and 8), located on the base of the dome drive, to
the same baud as the Pelco P-type controller.
Table A. Baud Settings
Switch Number

SW2-6

SW2-7

SW2-8

2400 Baud (default for Pelco D-type control)

Off

Off

Off

4800 Baud (default for Pelco P-type control)

On

Off

Off

9600 Baud

Off

On

Off

SW2 Switch 9: Coaxial/UTP Cable
SW2-9 should be set to the OFF position (default) if you are using coaxial cable. If you are using unsheilded twisted pair (UTP) cable, set SW2-9
to the ON position.

SW2 Switch 10: Termination Setting
When connecting more than one Spectra IV dome system to a single controller, terminate the unit farthest from the controller. Termination is only
required for the last dome in the series.
The dome drive is shipped from the factory in the unterminated (OFF) position. To terminate the dome drive, set SW2-10 to the ON position.
NOTE: Dome termination is not required for Coaxitron control.

8

C3463M-B (2/11)

DOME DRIVE
To install the dome drive:
1. Align the blue and red tabs with the blue and red arrows on the hinged door inside the back box.
2. Push the tabs in. Insert one side and then the other side.
3. Continue pushing on the ends of the tabs until both sides click into place (refer to Figure 2).

Figure 2. Dome Drive Installation
NOTE: When removing a dome drive that has been in use, caution should be taken to avoid direct contact with the top plate of the unit. This
section of the unit will be warm to the touch when first removed from an operating unit.
4. Apply power to the Spectra IV dome system. The system will start a configuration sequence. When configuration is done, the following
information is displayed:
Pelco Spectra IV SL/Spectra IV SE
Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
NOTE: When installing a Spectra IV dome drive in a Spectra III™ back box for the first time, a message appears. When the installation is
complete, the dome drive will continue with a normal configuration sequence.

C3463M-B (2/11)

9

Operation
QUICK OPERATION GUIDE
Pan and Tilt

Move the joystick or press the direction keys left/right and up/down.

Zoom Far

To zoom far:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom limit.
2. Release the button or joystick for one second.
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want
or reach the digital zoom* limit.

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

Scanning
Stop Scan
Random Scan
Frame Scan
Auto Scan

Preset 96
Preset 97
Preset 98
Preset 99

Presets

Refer to the documentation supplied with THE control system.

Patterns†

Refer to the documentation supplied with the control system.

Zones

Refer to Zones on page 40 and to the documentation supplied with the control system.

Alarms

Refer to Alarms on page 44.

Auto Flip

Turn on or off in the camera menu. Refer to Auto Flip on page 29.

QUICK CONFIGURATION GUIDE
1. Configure preset 95 to access the main menu (refer to Preset 95: Accessing Main Menu on page 11).
2. Use the joystick to position the cursor beside menu selection.
NOTE: If your controller does not have a joystick, use the up or down key.
3. Press Iris Open, the submenu/cursor moves to the right.
4. Move the joystick up or down to view selections.
5. Press Iris Open to make a selection.
6. Press Iris Close to cancel a selection.

*Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in
resolution.
†
The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.
10

C3463M-B (2/11)

PRESET 95: ACCESSING MAIN MENU
You can call up the main menu on your monitor by configuring (setting or creating) preset 95 (preset 28 in AD-32 preset mode).
Configuring preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for configuring preset 95 are
given below for various Pelco controllers.

CM6700/CM6800
1. Enter the number of the Spectra IV dome system and press the CAM key.
2. Enter 95 and hold the PRESET key for two seconds.
3. In the Edit Preset menu, go to SET and press the ACK key. The main menu appears.

KBD200A/KBD300A: Direct Mode Only
1. Enter 95.
2. Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

CM9500
1. Enter the number of the Spectra IV dome system and press the CAM key. The main menu appears.
2. Highlight SETUP in the main menu and press the SELECT key.
3. Highlight CAM in the Setup menu and press the SELECT key.
4. Highlight PRESET in the Camera menu and press the SELECT key.
5. Enter 95 and press the F1 key. The main menu appears.

CM9740/CM9760/CM9770/CM9780
1. Press the ESCAPE key to open the main menu. Select DEF. The Define submenu appears.
2. Enter your four-digit PIN if this is your first time entering this mode.
3. Enter 95 and select PRST. The main menu appears.
4. Select the Quit icon to return to the default menu.

KBD4000/KBD4002
1. Press the SPOT MONITOR key.
2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

MPT9500
Extended Coaxitron or RS-485 Mode
1. Enter 95 and press the PRESET SET key.
2. Press the F2 key. The main menu appears.

NET300/NET350/NET4001A
1. Check the Set box.
2. Click the preset 95 button. The main menu appears.

C3463M-B (2/11)

11

ENDURA WORKSTATION
1. Right-click in the video pane of the Spectra IV dome system.
2. Click Preset and then click Select Preset.
3. Enter 95 and then click OK.

VCD5000
1. Enter 95 for the preset action. The shortcuts menu appears.
2. Press the Preset button on the KBD5000.

DX4100/DX4500/DX4600/DX8100
1. Click the PTZ button on the toolbar. The PTZ control appears.
2. Click the Program button on the PTZ control. The main menu appears.

DIGITAL SENTRY® SYSTEM SOFTWARE
1. Click the PTZ tab.
2. Click the right or left arrows below the Go to Preset button until Go to Preset 95 appears on the button.
3. Click the Go to Preset 95 button. The main menu appears.

DIGITAL SENTRY DS CONTROLPOINT
1. Click the PTZ Controls icon. The PTZ Control tab appears below the PTZ video frame.
2. Click the up and down arrows to display 95 in the Preset Name text box.
3. Click the Call button. The main menu appears.

DVR5100
1. While in live view mode, select a video pane that is displaying video from a Spectra IV dome system.
2. From the Main menu, click Actions. The Actions menu appears.
3. From the Actions menu, click PTZ Operations. The PTZ Operations dialog box appears.
4. In the PTZ Operations dialog box, type 95 in the text box, and then click Presets. The main menu appears.

12

C3463M-B (2/11)

23X LowLight Day/Night Menu Tree

SPECTRA IV
LANGUAGE
ENGLISH



ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

SYSTEM INFORMATION

DISPLAY SETUP

SERIAL #
XXXXXXXXXXXXXX
DOME DRIVE MODEL
XX-XXXX
AVAILABLE
BACK BOX MEMORY
XX.X
SOFTWARE VERSION
BUILD
XX.X
FONT VERSION
XXXXXXXXXX
COMM
1
D ADDRESS
2
P ADDRESS
OFF
CM95OO MODE
OFF
32 PRESETS
C
PROTOCOL
X.XX
PRESSURIZED*


ADDITIONAL

CAMERA

DIPSWITCH INFORMATION

T1
ON
OFF
XXXX
XXXX

ZONES
1

SAVE AND EXIT
CANCEL
HELP
NE
XX°/-XX°
XXX.X*
MM/DD/YYYY
12:00:00 AM

PRESS IRIS OPEN TO CONTINUE

SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
VIDEO LEVEL
FIELD ALIGN

STYLE
BLANK ALL ABOVE
BLANK ALL BELOW


ON
OFF

ALERT*

CURRENT READING
CONSTANT
ALWAYS ON
NO

[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM -------]
[ALERT MESSAGE---]*
[TITLE TEXT]

SW1 1-8:
D ADDRESS 1
P ADDRESS 2
SW2 1 : 32 PRESETS. OFF
SW2 2 : CM9500 MODE. OFF
SW2 3 : COAX SPIV COMM
SW2 4-5 : RS422 <->
SW2 6-8 : COMM. 2400.N.8.1
SW2 9 : UTC SOURCE. COAX
SW2 10 : TX/RX TERM.. OFF

TEMPERATURE
DEWPOINT
PRESSURE
REFRESH

MOTION

AUTO
28
AUTO
66
8
ON
26
ON
255
255
OFF
HIGH
OFF

AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED DEG/S
PRESET FREEZE FRAME
LIMIT STOPS







GRAY
OFF
OFF

WINDOW NUMBER


ENABLE WINDOW
REVERSE
CLEAR WINDOW

WINDOW BLANKING

ZONE NUMBER
***ZONE NOT DEFINED***


ZONE ENABLED
ZONE BLANKING


LABEL POSITION

1234567890
SW2[- - - - - - - - - - ]

ADVANCED SETTINGS

TYPE OF LIGHTING
AUTO FOCUS
PT FOCUS LOCK
IR CUT FILTER
AUTO IR LEVEL


2 (SECS)
2 (SECS)
2 (SECS)
2 (SECS)
OFF
2 (SECS)
ON


RESTORE FACTORY DEFAULTS

12345678
SW1[- - - - - - - - ]

FREE MEMORY
XXXXXX
LAST RESET
POWER ON
AZIMUTH ZERO OFFSET
0°
MOTOR ACTIVE
YES
CAMERA ACTIVE
YES
VIDEO LEVEL
NORMAL
CAMERA MODEL
XXXX-XXXX
LANGUAGE 1
ENGLISH X.XX
...
LANGUAGE 10
ITALIANO X.XX


REPEAT
ACK ACTION
ACTIVATE AUX

RESET ALERT

PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
DIRECTION
ALARM MESSAGE
DATE/TIME

ON
ON
0
NONE
25
AUTO
ON

SET WINDOWS
1

CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.
NOTE: The BACK and EXIT options do not appear in these menus due to space limitations. See the individual menus in this document for complete
configurations.
C3463M-B (2/11)

13

DOME SETTINGS










<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>

LINE SYNC
LINE SYNC
LINE SYNC PHASE

PRESETS
ON
0

PATTERNS

PRESET NUMBER
***PRESET NOT DEFINED***
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>

1

PATTERN NUMBER
<PROGRAM PATTERN>
<CLEAR PATTERN>
REFERENCE INFO
PATTERN USAGE
REMAINING

REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
CUSTOM CAMERA SETTINGS

ALARMS
RESUME
SEQUENCE (SECS)
RESET DELAY (SECS)
<ALARM SETTINGS>

ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT

OFF

1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*

PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>

14

TITLE TEXT

AUX

ALARM SETTINGS
OFF
5
0

1
LOW
NONE
NO
N/O

EDIT THE PASSWORD
OK
CANCEL
BACKSPACE
SPACE

AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)

TOGGLE
1
TOGGLE
1

ENABLE TITLE TEXT
<EDIT TITLE TEXT>

CLOCK
TIME BASE
INTERNAL CLOCK
TIME FORMAT
12 HOUR
SET TIME
12:00 AM
DATE FORMAT
MM/DD/YYYY
SET DATE
00/00/0000
DAYLIGHT SAVINGS
OFF

C3463M-B (2/11)

27X LowLight Day/Night Menu Tree
SPECTRA IV
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

SYSTEM INFORMATION

DISPLAY SETUP

SERIAL #
XXXXXXXXXXXXXX
DOME DRIVE MODEL
XX-XXXX
BACK BOX MEMORY
AVAILABLE
SOFTWARE VERSION
XX.X
BUILD
FONT VERSION
XX.X
COMM
XXXXXXXXXX
D ADDRESS
1
P ADDRESS
2
CM95OO MODE
OFF
32 PRESETS
OFF
PROTOCOL
C
PRESSURIZED*
X.XX
<ADDITIONAL>

PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
DIRECTION
ALARM MESSAGE
DATE/TIME
EVENT LABEL

<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS

DIPSWITCH INFORMATION
12345678
SW1[- - - - - - - - ]

ADDITIONAL
FREE MEMORY
XXXXXX
LAST RESET
POWER ON
AZIMUTH ZERO OFFSET
0°
MOTOR ACTIVE
YES
CAMERA ACTIVE
YES
VIDEO LEVEL
NORMAL
CAMERA MODEL
XXXX-XXXX
LANGUAGE 1
ENGLISH X.XX
...
LANGUAGE 10
ITALIANO X.XX
<DIPSWITCH INFORMATION>

CAMERA

LABEL POSITION

1234567890
SW2[- - - - - - - - - - ]

[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM --------]
[ALERT MESSAGE---]*
[TITLE TEXT]

SW1 1-8:
D ADDRESS 1
P ADDRESS 2
SW2 1 : 32 PRESETS. OFF
SW2 2 : CM9500 MODE. OFF
SW2 3 : COAX SPIV COMM
SW2 4-5 : RS422 <->
SW2 6-8 : COMM. 2400.N.8.1
SW2 9 : UTC SOURCE. COAX
SW2 10 : TX/RX TERM.. OFF

T1
NORMAL
ON
OFF
OFF
XXXX
XXXX
XXXXXX
XXXX
DUSK
OFF

[EVENT--]

SAVE AND EXIT
CANCEL
HELP
NE
XX°/-XX°
MM/DD/YYYY

XXX.X*
12:00:00 AM

PRESS IRIS OPEN TO CONTINUE

ADVANCED SETTINGS

TYPE OF LIGHTING
PICTURE MODE
AUTO FOCUS
SURE FOCUS
PT FOCUS LOCK
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
LOW LIGHT FOCUS

2 (SECS)
2 (SECS)
2 (SECS)
2 (SECS)
OFF
2 (SECS)
ON
2 (SECS)

SUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
WIDE DYNAMIC RANGE

MOTION

AUTO
28
AUTO
66
8
ON
26
ON
255
255
OFF
OFF

<ADVANCED SETTINGS>
NEXT
BACK
EXIT

AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED DEG/S
PRESET FREEZE FRAME
LIMIT STOPS
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>

AUTO TRACKING
ON
ON
0
NONE
25
AUTO
ON

AUTO TRACKING
DISPLAY SETUP
SENSITIVITY
START TIME
ZOOM
LOST ACTION
RETURN

OFF
ON
HIGH
60
ON
STOP
OFF

REFERENCE INFORMATION
MANUAL LIMITS SET
SCAN LIMITS SET

LOW LUX NOISE REDUCTION
ON
VIDEO LEVEL
HIGH
FIELD ALIGN
OFF
LOW LIGHT SHARPNESS DEFAULT
MINIMUM FOCUS DISTANCE 30 CM

ZONES

PATTERNS
PATTERN NUMBER
<PROGRAM PATTERN>
<CLEAR PATTERN>
<EDIT SCHEDULE>
REFERENCE INFO
PATTERN USAGE
REMAINING

1

0%
100%

ALERT*
REPEAT
ACK ACTION
ACTIVATE AUX
<CURRENT READING>
RESET ALERT

ZONE NUMBER
***ZONE NOT DEFINED***
<EDIT ZONE LABEL>
<EDIT ZONE>
ZONE ENABLED
ZONE BLANKING
<CLEAR ZONE>

CURRENT READING
CONSTANT
ALWAYS ON
NO

TEMPERATURE
DEWPOINT
PRESURE
REFRESH

WINDOW BLANKING
1

STYLE
BLANK ALL ABOVE
BLANK ALL BELOW
<SET WINDOWS>

SET WINDOWS
GRAY
OFF
OFF

ON
OFF

CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
CLEAR ALL EVENTS
RESTORE FACTORY DEFAULTS

WINDOW NUMBER
<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
<EDIT SCHEDULE>
ENABLE WINDOW
REVERSE
CLEAR WINDOW

1

PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>

OFF

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.
NOTE: The BACK and EXIT options do not appear in these menus due to space limitations. See the individual menus in this document for complete
configurations.
C3463M-B (2/11)

15

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>

POWER UP
POWER UP ACTION

LINE SYNC
AUTO

ALARMS

PRESETS
ON
0

OFF
5
0

EDIT THE PASSWORD
OK
CANCEL
BACKSPACE
SPACE

ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT
<EDIT SCHEDULE>

MOTION DETECTION

PRESET NUMBER
***PRESET NOT DEFINED***
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
<APPLY TO GLOBAL>
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
CUSTOM CAMERA SETTINGS

1
LOW
NONE
NO
N/O

AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)
<EDIT SCHEDULE>

CLOCK
TIME BASE
INTERNAL CLOCK
TIME FORMAT
12 HOUR
SET TIME
12:00 AM
DATE FORMAT
MM/DD/YYYY
SET DATE
00/00/0000
DAYLIGHT SAVINGS
OFF

EVENT
EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL>
<EDIT EVENT>
<CLEAR EVENT>
<LIST EVENT>
HOLIDAY
<EDIT HOLIDAY>
<CLEAR HOLIDAY>
<LIST HOLIDAYS>
BACK
EXIT

MOTION DETECTION ENABLED
<EDIT DETECTION AREAS>
ACTIVATE AUX
AUX TIME (SECS)
BACK
EXIT

EDIT DETECTION AREAS
DETECTION AREA 1
LOCATION
SENSITIVITY
DETECTION AREA 2
LOCATION
SENSITIVITY
DETECTION AREA 3
LOCATION
SENSITIVITY
DETECTION AREA 4
LOCATION
SENSITIVITY

0
MEDIUM
0
MEDIUM
0
MEDIUM
0
MEDIUM

TITLE TEXT

AUX

ALARM SETTINGS

RESUME
SEQUENCE (SECS)
RESET DELAY (SECS)
<ALARM SETTINGS>

1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*

LINE SYNC
LINE SYNC PHASE

TOGGLE
1
TOGGLE
1

ENABLE TITLE TEXT
<EDIT TITLE TEXT>

EDIT EVENT
EVENT LABEL

EVENT01

EVENT ACTIVE
EVENT TIME
EVENT OCCURS
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
HOLIDAY

ON
12:00 AM

EVENT TYPE
NUMBER

ON
ON
ON
ON
ON
ON
ON
SKIP HOLIDAYS
PRESET
1

REFERENCE INFORMATION

16

C3463M-B (2/11)

35X LowLight Day/Night Menu Tree
SPECTRA IV
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

SYSTEM INFORMATION

DISPLAY SETUP

SERIAL #
XXXXXXXXXXXXXX
DOME DRIVE MODEL
XX-XXXX
AVAILABLE
BACK BOX MEMORY
XX.X
SOFTWARE VERSION
BUILD
XX.X
FONT VERSION
XXXXXXXXXX
COMM
1
D ADDRESS
2
P ADDRESS
OFF
CM95OO MODE
OFF
32 PRESETS
C
PROTOCOL
X.XX
PRESSURIZED*
<ADDITIONAL>

PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
DIRECTION
ALARM MESSAGE
DATE/TIME
EVENT LABEL

<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS

DIPSWITCH INFORMATION
12345678
SW1[- - - - - - - - ]

ADDITIONAL
FREE MEMORY
XXXXXX
LAST RESET
POWER ON
AZIMUTH ZERO OFFSET
0°
MOTOR ACTIVE
YES
CAMERA ACTIVE
YES
VIDEO LEVEL
NORMAL
CAMERA MODEL
XXXX-XXXX
LANGUAGE 1
ENGLISH X.XX
...
LANGUAGE 10
ITALIANO X.XX
<DIPSWITCH INFORMATION>

CAMERA

LABEL POSITION

1234567890
SW2[- - - - - - - - - - ]

[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM --------]
[ALERT MESSAGE---]*
[TITLE TEXT]

SW1 1-8:
D ADDRESS 1
P ADDRESS 2
SW2 1 : 32 PRESETS. OFF
SW2 2 : CM9500 MODE. OFF
SW2 3 : COAX SPIV
SW2 4-5 : RS422 <->
SW2 6-8 : COMM. 2400.N.8.1
SW2 9 : UTC SOURCE. COAX
SW2 10 : TX/RX TERM.. OFF

T1
NORMAL
ON
OFF
OFF
XXXX
XXXX
XXXXXX
XXXX
DUSK
OFF

<ADVANCED SETTINGS>

[EVENT--]

SAVE AND EXIT
CANCEL
HELP
NE
XX°/-XX°
MM/DD/YYYY

XXX.X*
12:00:00 AM

PRESS IRIS OPEN TO CONTINUE

ADVANCED SETTINGS

TYPE OF LIGHTING
PICTURE MODE
AUTO FOCUS
SURE FOCUS
PT FOCUS LOCK
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
LOW LIGHT FOCUS

2 (SECS)
2 (SECS)
2 (SECS)
2 (SECS)
OFF
2 (SECS)
ON
2 (SECS)

SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
E. IMAGE STABILIZER
WIDE DYNAMIC RANGE

MOTION

AUTO
28
AUTO
66
8
ON
26
ON
255
255
OFF
OFF
OFF

AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED DEG/S
PRESET FREEZE FRAME
LIMIT STOPS
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>

AUTO TRACKING
ON
ON
0
NONE
25
AUTO
ON

AUTO TRACKING
DISPLAY SETUP
SENSITIVITY
START TIME
ZOOM
LOST ACTION
RETURN

OFF
ON
HIGH
60
ON
STOP
OFF

NEXT
BACK
EXIT
LOW LUX NOISE REDUCTION
ON
VIDEO LEVEL
HIGH
FIELD ALIGN
OFF
LOW LIGHT SHARPNESS DEFAULT
MINIMUM FOCUS DISTANCE 30 CM

ZONES

PATTERNS
PATTERN NUMBER
<PROGRAM PATTERN>
<CLEAR PATTERN>
<EDIT SCHEDULE>
REFERENCE INFO
PATTERN USAGE
REMAINING

1

0%
100%

ALERT*
REPEAT
ACK ACTION
ACTIVATE AUX
<CURRENT READING>
RESET ALERT

ZONE NUMBER
***ZONE NOT DEFINED***
<EDIT ZONE LABEL>
<EDIT ZONE>
ZONE ENABLED
ZONE BLANKING
<CLEAR ZONE>

CURRENT READING
CONSTANT
ALWAYS ON
NO

TEMPERATURE
DEWPOINT
PRESSURE
REFRESH

WINDOW BLANKING
1

STYLE
BLANK ALL ABOVE
BLANK ALL BELOW
<SET WINDOWS>

SET WINDOWS
GRAY
OFF
OFF

ON
OFF

CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
CLEAR ALL EVENTS
RESTORE FACTORY DEFAULTS

WINDOW NUMBER
<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
<EDIT SCHEDULE>
ENABLE WINDOW
REVERSE
CLEAR WINDOW

1
NO

PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>

OFF

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.
NOTE: The BACK and EXIT options do not appear in the menus due to space limitations. See the individual menus in this document for complete
configurations.

C3463M-B (2/11)

17

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>

POWER UP
POWER UP ACTION

LINE SYNC
AUTO

LINE SYNC
LINE SYNC PHASE

PRESETS
ON
0

MOTION DETECTION

PRESET NUMBER
***PRESET NOT DEFINED***
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
<APPLY TO GLOBAL>

MOTION DETECTION ENABLED
<EDIT DETECTION AREAS>
ACTIVATE AUX
AUX TIME (SECS)

REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
CUSTOM CAMERA SETTINGS

ALARMS
OFF
5
0

EDIT THE PASSWORD
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*

OK
CANCEL
BACKSPACE
SPACE

ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT
<EDIT SCHEDULE>

1
LOW
NONE
NO
N/O

AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)
<EDIT SCHEDULE>

CLOCK
TIME BASE
INTERNAL CLOCK
TIME FORMAT
12 HOUR
SET TIME
12:00 AM
DATE FORMAT
MM/DD/YYYY
SET DATE
00/00/0000
DAYLIGHT SAVINGS
OFF

EVENT
EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL>
<EDIT EVENT>
<CLEAR EVENT>
<LIST EVENT>
HOLIDAY
<EDIT HOLIDAY>
<CLEAR HOLIDAY>
<LIST HOLIDAYS>

0
MEDIUM
0
MEDIUM
0
MEDIUM
0
MEDIUM

TITLE TEXT

AUX

ALARM SETTINGS

RESUME
SEQUENCE (SECS)
RESET DELAY (SECS)
<ALARM SETTINGS>

EDIT DETECTION AREAS
DETECTION AREA 1
LOCATION
SENSITIVITY
DETECTION AREA 2
LOCATION
SENSITIVITY
DETECTION AREA 3
LOCATION
SENSITIVITY
DETECTION AREA 4
LOCATION
SENSITIVITY

TOGGLE
1
TOGGLE
1

ENABLE TITLE TEXT
<EDIT TITLE TEXT>

EDIT EVENT
EVENT LABEL

EVENT01

EVENT ACTIVE
EVENT TIME
EVENT OCCURS
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
HOLIDAY

ON
12:00 AM
ON
ON
ON
ON
ON
ON
ON
SKIP HOLIDAYS

REFERENCE INFORMATION
EVENT TYPE
NUMBER

18

PRESET
1

C3463M-B (2/11)

Language
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian,
Polish, Turkish, and Czech. The factory default language is English.
To change the display language:
1. Use the joystick to position the cursor beside LANGUAGE.
2. Press Iris Open. The cursor moves to the right, beside the current, selected language.
3. Move the joystick up or down to view selections. Press Iris Open to enter selection. All on-screen menus are changed to the selected
language.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

19

System Information
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

ADDITIONAL

SYSTEM INFORMATION

SPECTRA IV
LANGUAGE

SERIAL #
DOME DRIVE MODEL
BACK BOX MEMORY
SOFTWARE VERSION
BUILD
FONT VERSION

FREE MEMORY
LAST RESET
AZIMUTH ZERO OFFSET
MOTOR ACTIVE
CAMERA ACTIVE
VIDEO LEVEL
CAMERA MODEL
LANGUAGE 1
LANGUAGE 2
LANGUAGE 3
LANGUAGE 4
LANGUAGE 5
LANGUAGE 6
LANGUAGE 7
LANGUAGE 8
LANGUAGE 9
LANGUAGE 10
<DIPSWITCH INFORMATION>

COMM
D ADDRESS
P ADDRESS
CM9500 MODE
32 PRESETS
PROTOCOL
PRESSURIZED*
<ADDITIONAL>
BACK
EXIT

BACK
EXIT

The System Information menu displays the dome drive model, software version, available memory, DIP switch information, and other diagnostic
information.
System settings cannot be changed using this menu; this information is for reference only.
Use the following steps to display the System Information menu:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION menu opens.

DIP SWITCH INFORMATION
The DIP Switch Information menu displays the dome drive’s current DIP switch settings. This provides a way to remotely view the DIP switch
settings without removing the dome drive from the back box.
DIP SWITCH INFORMATION
12345678
1234567890
SW1[- - - - - - - -] SW2[- - - - - - - - - -]
SW1 1-8 :
D ADDRESS 1
P ADDRESS 1
SW2 1 : 32 PRESETS. OFF
SW2 2 : CM9500 MODE. OFF
SW2 3 : COAX SPIV
SW2 4-5 : RS422 <->
SW2 6-8 : COMM. 2400.N.8.1
SW2 9 : UTC SOURCE. COAX
SW2 10 : TX/RX TERM.. OFF
PRESS IRIS OPEN TO CONTINUE

*This setting applies to Pressurized Spectra IV dome systems only.
20

C3463M-B (2/11)

Display Setup
DISPLAY SETUP

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
DIRECTION
ALARM MESSAGE
DATE/TIME
EVENT LABEL
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
BACK
EXIT

Display setup allows you to configure how labels are displayed on the monitor. The following labels are available:
PRESET LABEL: Identifies preset.
ZONE LABEL: Identifies zone.
ZOOM: Identifies the amount of magnification.
AZIMUTH†/ELEVATION‡: Amount of pan from zero degrees vertical and the amount of tilt from zero degrees horizontal.
DIRECTION: Displays compass direction.
ALARM MESSAGE: Displays activated alarm.
DATE/TIME: Displays current date and time.
EVENT LABEL: Displays activated event.
A preset label is displayed when a preset is called. A zone label is displayed when the system moves into a zone. The zoom ratio label is
displayed when zoom is activated. Azimuth/elevation and direction labels are displayed when pan/tilt is activated. An alarm message appears on
the monitor when an alarm occurs. An event label appears on the monitor when an event occurs.
The following settings are available for each label except date and time:
OFF: Label is not displayed when activated.
CONSTANT: The label is continually displayed when activated.
2 SECONDS: The label is displayed for 2 seconds after activation.
5 SECONDS: The label is displayed for 5 seconds after activation.
10 SECONDS: The label is displayed for 10 seconds after activation.
The settings for date and time are ON or OFF.

*This setting applies to Pressurized Spectra IV dome systems only.
†
Azimuth is the pan angle from zero to 359 degrees.
‡
Elevation is the tilt position from zero (horizon) to –90 degrees.
C3463M-B (2/11)

21

LABEL POSITIONS
DISPLAY SETUP

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
DIRECTION
ALARM MESSAGE
DATE/TIME
EVENT LABEL
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
BACK
EXIT

LABEL POSITION
[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM --------]
[EVENT--]
[ALERT MESSAGE-------]*
<TITLE TEXT>
SAVE AND EXIT
CANCEL
HELP
NE
XX°/-XX°
MM/DD/YYYY

XXX.X*
12:00:00 AM

Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen.
The following labels are not set at fixed positions:
ZONE LABEL
PRESET LABEL
ALARM
ZOOM RATIO - XXX.X*
AZIMUTH†/ELEVATION‡ - XX°/-XX°
DIRECTION - NE
ALERT MESSAGE*§
TITLE TEXT
EVENT LABEL
DATE/TIME
To set a label position:
1. Use the joystick to position the cursor beside a label.
2. Press Iris Open.
3. Use the joystick to move the label up, down, left, or right.
4. Press Iris Open.
5. Repeat steps 1 to 4 to position other labels.
6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit the menu.

*This setting applies to Pressurized Spectra IV dome systems only.
†
Azimuth is the pan angle from zero to 359 degrees.
‡
Elevation is the tilt position from zero (horizon) to –90 degrees.
§
The alert message is the warning displayed on the monitor if pressure, temperature, or dew point inside the dome reach unacceptable levels.

22

C3463M-B (2/11)

Dome Settings
CAMERA
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

CAMERA
TYPE OF LIGHTING
PICTURE MODE
AUTO FOCUS
SURE FOCUS
PT FOCUS LOCK
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
LOW LIGHT FOCUS
<ADVANCED SETTINGS>
BACK
EXIT

TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance and the picture for several lighting conditions. There are two settings:
T1 (default): For use in outdoor applications.
T2: For use in indoor applications.

Picture Mode
(Applies to 27X and 35X models only.)
Picture mode offers enhanced color and brightness depending on the scene.
Available settings are NORMAL (default) and ENHANCED. When picture mode is set to ENHANCED, the camera enhances colors and the overall
picture.
NOTES:
•

The scene on your monitor will darken temporarily when you change the picture mode setting.

•

When Type Of Lighting is set to T1 and Picture Mode is set to Enhanced, and you change the setting for Type Of Lighting to T2, Picture Mode
is no longer visible in the menu. When Type Of Lighting is returned to the T1 setting, Picture Mode becomes visible and is automatically
reset to Normal.

AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default): If auto focus mode is set to ON, the camera will focus automatically when using pan, tilt, and zoom (PTZ) functions.
OFF: Focus is operated manually. To focus, press the Focus Far or Focus Near button on the controller.

Sure Focus
(Applies to 27X and 35X models only.)
When sure focus is enabled and all PTZ motions are stopped, the camera will attempt to find a fixed focus position and lock to an object in the
scene. If a focus lock is acquired or a specific amount of time has expired with no focus lock, the focus position remains fixed until PTZ is
resumed.
NOTE: If auto focus is OFF, sure focus is disabled and hidden from the menu.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

23

PT Focus Lock
Pan/tilt (PT) focus lock holds the focus position of the lens during PTZ to maintain accurate focus between scenes, especially during the
execution of presets and in low-light scenes. There are two settings:
ON: PT focus lock is enabled.
OFF (default): PT focus lock is disabled.

ZOOM LIMIT
(Applies to 27X and 35X models only.)
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The settings vary depending on camera model.
23X (Models DD423 and DD423-X)
The default setting is 32X. The zoom limit cannot be changed for 23X models.
27X (Models DD427 and DD427-X)
The default setting is 54X. Cameras with 324X zoom (27X optical zoom and 12X digital zoom) can be set for 27X, 54X, 108X, 216X, 270X, or 324X.
35X (Models DD4CBW35 and DD4CBW35-X)
The default setting is 70X. Cameras with 420X zoom (35X optical zoom and 12X digital zoom) can be set for 35X, 70X, 140X, 280X, 350X, or 420X.

ZOOM SPEED
(Applies to 27X and 35X models only.)
Zoom speed allows the user to define the speed at which the dome will go from full wide zoom to the optical zoom.
The zoom speed is set to 4.2 seconds and cannot be changed for 23X models.
Available zoom speed settings for 27X and 35X models include:
HIGH: 3.2 seconds
MEDIUM (default): 4.6 seconds
LOW: 6.6 seconds
NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.

LOW LIGHT LIMIT
(Applies to 27X and 35X models only.)
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will remain open in low light conditions. The default
setting is 2. Refer to Table B for available settings.
Table B. Low Light Limit Settings
Setting

24

Duration of Open Electronic Shutter

2 (default)

1/2 second

4

1/4 second

8

1/8 second

15

1/15 second

30

1/30 second

60

1/60 second

C3463M-B (2/11)

IR CUT FILTER
Spectra IV dome systems have two modes of operation: color, and black-white. You can increase sensitivity in low light conditions by switching
to black-white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions.
The following are the settings for the IR cut filter:
OFF: Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT).
AUTO (default): Automatic operation is controlled by the auto IR level setting.
IN: Images are always displayed in color mode.
OUT: Images are always displayed in black-white mode.
NOTE: The IN and OUT settings are available when editing camera settings through the Camera and Presets menus (refer to Camera on page 23
and Presets on page 34).

Auto IR Level
The auto IR level is the light level at which the infrared filter switches IN or OUT.
Following are the available settings for the auto IR level:
DUSK (default): Approximately 6 lux (black-white); approximately 13 lux (color).
DARK: Approximately 0.1 lux (black-white); approximately 2 lux (color).
NOTES:
•

If backlight compensation is ON and the IR cut filter switches OUT in normal lighting conditions, adjust the Auto IR Level to a darker setting.
Refer to Backlight Compensation on page 27.

•

Low light does not mean no light. Some type of illumination is required (street light, IR light, etc.). The camera is not sensitive to IR light
when the IR cut filter is IN.

Low Light Focus
(Applies to 27X and 35X models only.)
If you are using an IR illuminator, the low light focus feature of the camera can be tuned to correspond to the setting of the illuminator.
There are three low light focus settings:
OFF (default): Low light focus is not activated.
850NM: Low light focus is tuned to 850 nm (nanometers).
950NM: Low light focus is tuned to 950 nm.

C3463M-B (2/11)

25

ADVANCED CAMERA SETTINGS
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

ADVANCED SETTINGS

CAMERA
TYPE OF LIGHTING
PICTURE MODE
AUTO FOCUS
SURE FOCUS
PT FOCUS LOCK
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
LOW LIGHT FOCUS

SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
E. IMAGE STABILIZER
WIDE DYNAMIC RANGE

<ADVANCED SETTINGS>

NEXT
BACK
EXIT

BACK
EXIT

LOW LUX NOISE REDUCTION
VIDEO LEVEL
FIELD ALIGN
LOW LIGHT SHARPNESS
MINIMUM FOCUS DISTANCE

SHUTTER SPEED
Shutter speed is the duration of the electronic shutter. You can configure the shutter speed to operate automatically (Auto) or manually
(Numeric Value).
AUTO (default): The electronic shutter speed is set automatically by the amount of light sensed by the camera.
NUMERIC VALUE: Spectra IV dome systems have several numerical shutter speed settings. The higher the number, the faster the electronic
shutter.
The slowest shutter speed setting is 2 = 1/2 second.
The fastest setting is 30,000 = 1/30,000 second.
Increasing the shutter speed lowers the light sensitivity and reduces the streaking of fast moving objects.
Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will eliminate any flicker that may occur in the picture.

AGC LIMIT
AGC limit allows users to adjust how the system balances AGC (automatic gain control) and electronic shutter in low light conditions. As scene
lighting decreases, the system will automatically adjust, adding a mixture of AGC and slow shutter according to the AGC limit setting. AGC limit
can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast, setting AGC limit to 0 will force the system
software to apply maximum slow shutter (as defined by the low light limit setting) before any AGC is applied. The default AGC settings vary
depending on camera model.
NOTE: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to Low Light Limit on page 24).

AUTO IRIS
Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions.
You can configure the auto iris to operate automatically or at a user-defined level.
OFF: Auto iris is disabled, and control is always manual.
AUTO (default): The iris is adjusted automatically to produce a constant video output as determined by the auto iris level setting.
If auto iris is in the auto mode, it will remain that way until the iris is manually opened or closed. The dome will return to auto mode when it is
panned or tilted more than 15 degrees.

Auto Iris Level
Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera. Increase the value to brighten the scene.
Decrease the value to darken the scene. This setting can be adjusted if the video level in the auto iris mode is too bright or too dark.
NOTE: If backlight compensation is ON, decrease the auto iris level setting.

*This setting applies to Pressurized Spectra IV dome systems only.
26

C3463M-B (2/11)

Auto Iris Peak
Increasing the peak value will cause the auto iris circuit to react more to highlights or “peaks” in the picture. Decreasing this value will cause it
to use the average video level to adjust the iris.

AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.
There are two settings:
ON (default): The camera automatically maintains a normal sharpness mode.
OFF: The sharpness of the picture is set manually by configuring the sharpness level. Sharpness level settings range from 0 to 63.

AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white
balance is ON.
R GAIN: Adjusts the picture output in the red range. As you change the value, you will see the color change on your monitor.
B GAIN: Adjusts the picture output in the blue range. As you change the value, you will see the color change on your monitor.

BACKLIGHT COMPENSATION
If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation (BLC) enhances objects in
the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will
wash out to white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.
There are two backlight compensation settings:
OFF (default): Backlight compensation is not activated.
ON: Backlight compensation is activated.
If backlight compensation is ON, decrease the auto iris level setting and adjust the auto IR level to a darker setting. Refer to Auto Iris Level on
page 26 and Auto IR Level section on page 25.

ELECTRONIC IMAGE STABILIZATION
(Applies to 35X models only.)
Electronic image stabilization is a feature of the camera that can compensate for some forms of external influences. In all cases, care should be
taken to make sure that any dome system is mounted to a rigid location.
In the event that vibration is introduced to the dome system, a user can select one of the electronic image stabilization settings in the menu. The
available settings are OFF, 5 Hz, and 10 Hz. Users should apply each of the settings to the camera to see which one best addresses the vibration
that is affecting the video quality.
Electronic image stabilization will not correct for all ranges of vibration. If either of the settings fails to eliminate the vibration seen in the video,
other measures should be taken to isolate the vibration or to seek a more rigid mounting location.
NOTES:
•

When electronic image stabilization is applied, digital slow shutter and wide dynamic range are disabled. Zoom, image resolution, and
viewing angle are also limited when this feature is activated.

•

Electronic image stabilization cannot be used while in a preset that has motion detection activated.

WIDE DYNAMIC RANGE
(Applies to 27X and 35X models only.)
Wide dynamic range (WDR) balances the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and
provides more detail.
Available settings are OFF and ON; the default setting is OFF. When wide dynamic range is set to ON, the frame rate is reduced from the standard
30 to 15 frames per second (fps). Also, when this setting is ON, the iris will not close completely, even in manual mode.

C3463M-B (2/11)

27

NOTE: Wide dynamic range is disabled when electronic image stabilization is set to 5 Hz or 10 Hz.

Wide Dynamic Range ON

Wide Dynamic Range OFF

Figure 3. Wide Dynamic Range Settings

LOW LUX NOISE REDUCTION
(Applies to 27X and 35X models only.)
Low lux noise reduction helps to reduce video noise in low light scenes. When enabled, low lux noise reduction is directly affected by the AGC
settings for the dome system.
The following are the low lux noise reduction settings:
ON (default): Low lux noise reduction is enabled. As the scene darkens and AGC increases, the noise reduction effect automatically increases.
As noise reduction increases, you may also notice some afterimaging and a slight reduction in color saturation.
OFF: Low lux noise reduction is disabled.

VIDEO LEVEL
Set the video output to one of the following options:
NORMAL: 1.0 Vp-p.
HIGH (default setting): 1.2 Vp-p. to compensate for losses in video cable.

FIELD ALIGN
Field align determines whether the camera produces progressive segmented frame output (PsF) or interlaced frame output. Analog video from the
camera is always output in separate fields as required for compatibility. This feature allows PsF to be recombined by an encoding device without
a time difference between fields, as is typically seen from interlaced analog video output. Enabling field align requires that the encoding device
you are using always combines the odd and even fields in the specified order.
There are three field alignment settings:
OFF (default): Field alignment is disabled. Use this setting if you are using an analog device/system or a digital encoder that does not support
PsF.
ODD: Arranges the odd field for a particular video frame before the even field for that frame.
EVEN: Arranges the even field for a particular video frame before the odd field for that frame.
NOTES:

28

•

If you enable field alignment by selecting ODD or EVEN, you must disable any deinterlacing settings for the encoding device to achieve
maximum resolution.

•

The ODD and EVEN settings require that the sensor scan mode is set to PROGRESSIVE. If field align is set to ODD or EVEN, the sensor scan
mode automatically changes to PROGRESSIVE.

C3463M-B (2/11)

LOW LIGHT SHARPNESS
(Applies to 27X and 35X models only.)
Low light sharpness allows you to control the video sharpness in low-light scenes. The available settings are 20, 10, DEFAULT, –10, and –20.
Increasing the value increases sharpness in low-light scenes, but also increases video noise. Decreasing the value decreases video noise in
low-light scenes, but it also decreases image sharpness.
NOTE: Changing the low light sharpness causes the camera to reset, which resets all camera settings to their factory defaults.

MINIMUM FOCUS DISTANCE
(Applies to 27X and 35X models only.)
Minimum focus distance improves focus capability in low-light scenes, depending on the typical distance between the camera and objects in the
scene. There are two settings:
30 CM (default): Improves focus for scenes in which the camera is typically focusing on objects at close range (less than 3 meters).
3 M: Improves focus for scenes in which the camera is typically focusing on objects at a distance of 3 meters or more.

MOTION SETTINGS
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

MOTION
AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED (DEG/S)
PRESET FREEZE FRAME
LIMIT STOPS
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
BACK
EXIT
REFERENCE INFORMATION
MANUAL LIMITS SET
SCAN LIMITS SET

AUTO FLIP
When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the
camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome
rotates, joystick control returns to normal operation. The auto-flip feature is useful for following a person who passes directly beneath the dome.
There are two auto flip modes:
ON (default): Auto flip mode is enabled.
OFF: Auto flip mode is disabled.

PROPORTIONAL PAN
Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom. At telephoto zoom settings, the
pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings. This keeps the image from moving too
fast on the monitor when there is a large amount of zoom.
There are three proportional pan modes:
ON (default): Enables the proportional pan mode.
OFF: Disables proportional pan mode. The pan speed will not depend on the amount of zoom.
2X: Increases the speed of the proportional pan mode to twice that used when proportional pan is set to ON.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

29

PARK TIME
This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a configured period of inactivity.
Park time can be configured from 1 to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero.

Park Action
This feature will define the activity when the dome parks. The following settings are available:
NONE (default): No action.
AUTO SCAN: Dome starts auto scan operation.
FRAME SCAN: Dome starts frame scan operation.
RANDOM SCAN: Dome starts random scan operation.
PATTERN 1: Dome runs pattern 1.
PATTERN 2: Dome runs pattern 2.
PATTERN 3: Dome runs pattern 3.
PATTERN 4: Dome runs pattern 4.
PATTERN 5: Dome runs pattern 5.
PATTERN 6: Dome runs pattern 6.
PATTERN 7: Dome runs pattern 7.
PATTERN 8: Dome runs pattern 8.
PRESET 1: Dome goes to preset 1.
PRESET 8: Dome goes to preset 8.
(Only 27X and 35X models allow PATTERN 2 through PATTERN 8.)

SCAN SPEED
Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second
through the camera menu. The default setting is 25 degrees per second.

PRESET FREEZE FRAME
This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene to another. Preset
freeze frame also reduces bandwidth when used with digital network systems such as PelcoNet™ and guarantees that blanked areas will not be
revealed when going to a preset.
There are three preset freeze frame settings:
ON: The image on the screen freezes when a preset is called. When the dome reaches the preset, the image is unfrozen and the preset scene is
displayed.
OFF: The image is never frozen.
AUTO (default): Freeze frame is turned on automatically if window blanking is ON. If window blanking is OFF, freeze frame is off.

LIMIT STOPS
Limit stops are configurable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area.
There are two types of limit stops:
MANUAL: A manual (joystick) pan operation stops when a limit stop is reached.
SCAN: The dome reverses direction during random, frame, or auto scanning when a limit stop is reached.

30

C3463M-B (2/11)

To set manual or scan stops:
1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
NOTE: In order for the manual or scan stops to work, the LIMIT STOPS option must be ON.
To clear manual or scan stops:
1. Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.

AZIMUTH ZERO
Azimuth is the pan angle from zero to 359 degrees. Azimuth zero is the pan position you specify to be the zero degree point. Azimuth zero is
normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.
To configure azimuth zero:
1. Use the joystick to position the cursor beside SET AZIMUTH ZERO.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
To clear azimuth zero:
1. Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.

AUTO TRACKING
(Applies to 27X and 35X models only.)
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

AUTO TRACKING
AUTO TRACKING
DISPLAY SETUP
SENSITIVITY
START TIME
ZOOM
LOST ACTION
RETURN

OFF
ON
HIGH
60
ON
STOP
OFF

AUTO TRACKING
Auto tracking allows the camera to automatically pan, tilt, and zoom to track objects of interest (people, cars, and so forth) when motion is
detected in a scene without requiring an operator to manually control the camera’s PTZ movements. There are two settings:
ON: Auto tracking is enabled.
OFF (default): Auto tracking is disabled.
NOTE: If the auto tracking setting is OFF, all other settings in the Auto Tracking menu are disabled.

C3463M-B (2/11)

31

DISPLAY SETUP
When display setup is enabled, you are notified that the camera detects motion in a scene. There are two settings:
ON (default): Display setup is enabled and a transparent blue rectangle appears in the area of the scene where motion has been detected.
OFF: Display setup is disabled.

SENSITIVITY
Sensitivity adjusts the camera’s sensitivity to motion, thereby adjusting the number of moving objects that will be tracked automatically. There
are two settings:
HIGH (default): Sensitivity is increased and most moving objects, regardless of size, will be detected and tracked.
LOW: Sensitivity is decreased and smaller movements that may not be as significant will not be tracked.

START TIME
Start time is the amount of time between the execution of a user command and the start of auto tracking. The start time can be set between
1 and 10 minutes. The default setting is 1 minute.

ZOOM
When zoom is enabled, the camera automatically zooms in or out to keep the object of interest in the main field of view. There are two settings:
ON (default): Automatic zoom is enabled.
OFF: Automatic zoom is disabled.

LOST ACTION
If the object of interest is lost from the field of view and there is no other moving object to track, the camera will either stop automatic PTZ or will
zoom out to attempt to relocate a moving object. There are two settings:
STOP (default): Automatic PTZ stops if the object of interest is lost from the field of view.
ZOOM OUT: The camera zooms out to attempt to relocate the object of interest or to locate a new moving object to auto track.

RETURN
Return is the amount of time after the last motion has been detected and the time at which the camera returns to the location where auto
tracking began. Return can be set between 10 and 60 seconds or it can be turned off. The default setting is OFF.

32

C3463M-B (2/11)

POWER UP
(Applies to 27X and 35X models only.)

POWER UP ACTION
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

POWER UP
POWER UP ACTION

BACK
EXIT

This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled.
The following settings are available:
NONE: No action.
AUTO (default): The dome resumes its prior activity or direction before the power outage occurred.
PRESET 1: Dome goes to preset 1.
PRESET 2: Dome goes to preset 2.
PRESET 3: Dome goes to preset 3.
PRESET 4: Dome goes to preset 4.
PRESET 5: Dome goes to preset 5.
PRESET 6: Dome goes to preset 6.
PRESET 7: Dome goes to preset 7.
PRESET 8: Dome goes to preset 8.
AUTO SCAN: Dome starts auto scan operation.
FRAME SCAN: Dome starts frame scan operation.
RANDOM SCAN: Dome starts random scan operation.
PATTERN 1: Dome runs pattern 1.
PATTERN 2: Dome runs pattern 2.
PATTERN 3: Dome runs pattern 3.
PATTERN 4: Dome runs pattern 4.
PATTERN 5: Dome runs pattern 5.
PATTERN 6: Dome runs pattern 6.
PATTERN 7: Dome runs pattern 7.
PATTERN 8: Dome runs pattern 8.
(Only 27X and 35X models allow PATTERN 2 through PATTERN 8.)

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

33

LINE SYNC
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

LINE SYNC
LINE SYNC
LINE SYNC PHASE

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

BACK
EXIT

Line sync refers to a configurable function that allows you to synchronize all cameras within a matrix system.
Spectra IV dome systems automatically sense V-Sync input. No line sync setup is required for Pelco control systems that provide a V-Sync signal.
For matrix systems that do not output V-Sync, there are two settings for line synchronization:
ON: Adjusts the phase of the line sync to synchronize input power. Line sync phase settings range from zero to 359 degrees.
OFF (default): The dome synchronizes to the internal clock.

PRESETS
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

PRESETS
PRESET NUMBER
* * * PRESET NOT DEFINED * * *

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

1

<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
<APPLY TO GLOBAL>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM RATIO
CUSTOM CAMERA SETTINGS

-

The model of the back box you are using limits the number of configurable presets that can be stored and retrieved in the back box memory. If you
are using an older model back box, you may configure and use up to the maximum number of presets available to the dome drive. However, if the
dome drive is changed, the back box model will limit the number of stored presets available to the new dome drive (refer to Table C).
Table C. Stored Presets by Back Box Model
Back Box Series

Model

Number of Stored Presets
Spectra/Spectra SL

Spectra SE

Spectra III

BB53

99

15

Spectra IV

BB4

64

256

*This setting applies to Pressurized Spectra IV dome systems only.
34

C3463M-B (2/11)

The Spectra IV SL dome system, which includes 23X models, has 64 preset positions. The presets that can be configured are numbered 1 to 32
and 35 to 64.
The Spectra IV SE dome system, which includes 27X and 35X models, has 256 preset positions. The presets that can be configured are numbered
1 to 32, 35 to 82, and 100 to 256.
NOTE: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your dome system.
Each of the user-definable presets can be configured to use pan, tilt, camera settings, and motion detection.
The following presets are predefined for specific functions:
Preset 33: Flip command; pans the dome drive 180 degrees
Preset 34: Pan zero command; directs the dome drive to the factory-determined zero reference point
Preset 83 to 87: Reserved
Preset 88: IR filter IN (color)
Preset 89: IR filter OUT (black-white)
Preset 90 to 91: Manual limit stops
Preset 92 to 93: Scan limit stops
Preset 94: Reserved
Preset 95: Select main configuration menu
Preset 96: Stop a scan
Preset 97: Random scanning
Preset 98: Frame scanning
Preset 99: Start auto scanning
NOTE: For American Dynamics™ controllers with only 32 presets, switch SW2-1 on the dome drive to the ON position. When SW2-1 is ON,
several presets change (refer to Table D).
Table D. Presets for American Dynamics Controllers
Spectra IV Presets

American Dynamics
Controller Presets

88

21

89

22

90

23

91

24

92

25

93

26

95

28

96

29

97

30

98

31

99

32

If the limit stops are turned off, presets 23 to 26 can be used as regular presets.

C3463M-B (2/11)

35

Use the following steps to configure a preset.
1. Select the preset number:
a.

Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open. The cursor moves to the right.

b.

Move the joystick up or down to view selections. Press Iris Open to enter selection.

2. Edit the preset label:
a. Use the joystick to position the cursor beside EDIT PRESET LABEL.
b.

Press Iris Open. The following informations appears:
LABEL FOR PRESET
PRESET NUMBER -----1234567890
OK
ABCDEFGHIJ
CANCEL
KLMNOPQRST
UVWXYZ.,-/
BACKSPACE
abcdefghij
SPACE
klmnopqrst
uvwxyz*;:

c.

Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor
beside BACKSPACE, and then press Iris Open.

d.

When label is completed, move the cursor to OK. Press Iris Open to return to the Preset menu.

3. Edit the preset scene:
a. Use the joystick to position the cursor beside EDIT PRESET SCENE.
b.

Press Iris Open.

c.

Follow the directions displayed on the monitor.

4. Edit preset camera settings:
a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.
b.

Press Iris Open. The EDIT CAMERA SETTINGS window appears. Refer to Camera on page 23 and Advanced Camera Settings on
page 26 to change preset camera settings.

c.

To edit the camera settings schedule, use the joystick to position the cursor beside EDIT SCHEDULE. Press Iris Open.
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit
Schedule menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.

NOTES:
•

There are two additional options available for the IR cut filter that are only available when configuring a preset. The additional settings are
IN and OUT. If the IR cut filter is set to IN, the preset scene will be in color. If the IR cut filter is set to OUT, the preset scene will be in blackwhite.

•

You can copy camera settings from one preset to another preset. To copy camera settings do the following:
(1) Use the joystick to position the cursor beside COPY CAMERA SETTINGS.

•

36

(2)

Press Iris Open. The cursor moves to the right.

(3)

Move the joystick up or down to view selections. Press Iris Open to enter selection.

The “Apply to Global” setting allows camera settings specified for a particular preset to remain in effect even after the preset has been
completed.

C3463M-B (2/11)

MOTION DETECTION
(Applies to 27X and 35X models only.)
DOME SETTINGS

SPECTRA IV

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

MOTION DETECTION

PRESETS

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

LANGUAGE

PRESET NUMBER
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>

MOTION DETECTION ENABLED
<EDIT DETECTION AREAS>
ACTIVATE AUX
AUX TIME (SECS)
BACK
EXIT

<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM RATIO
CUSTOM CAMERA SETTINGS

Enable Motion Detection
The following are the settings for motion detection:
OFF (default): Motion detection is turned off (disabled).
ON: Motion detection is turned on (enabled).
NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second.

Edit Detection Areas
Four motion detection areas can be defined for a preset. Use the following steps to edit motion detection areas.
1. Edit detection areas 1, 2, 3, or 4:
a.

Use the joystick to position the cursor beside EDIT DETECTION AREAS.

b.

Press Iris Open. The EDIT DETECTION AREAS configuration window appears.
EDIT DETECTION AREAS
DETECTION AREA 1
LOCATION
SENSITIVITY
DETECTION AREA 2
LOCATION
SENSITIVITY
DETECTION AREA 3
LOCATION
SENSITIVITY
DETECTION AREA 4
LOCATION
SENSITIVITY
BACK
EXIT

0
MEDIUM
0
MEDIUM
0
MEDIUM
0
MEDIUM

c.

Use the joystick to position the cursor beside LOCATION for DETECTION AREA 1, 2, 3, or 4.

d.

Press Iris Open. The cursor moves to the right next to the number 0.

e.

Move the joystick up. A blue rectangle appears in the upper-left corner of the screen (refer to Figure 4 on page 38).

f.

Use the joystick to place the blue rectangle over the desired detection area.

g.

Press Iris Open to make a selection.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

37

MOTION DETECTION AREAS

Figure 4. Motion Detection Areas
2. Set the sensitivity of the motion detection area:
a. Position the cursor next to SENSITIVITY for DETECTION AREA 1, 2, 3, or 4.
b.

Press Iris Open, the cursor moves to the right.

c.

Use the joystick to select one of the following sensitivity levels:
HIGH: The sensitivity level is high.
MEDIUM (default): Average sensitivity.
LOW: The sensitivity level is low.

d.

Press Iris Open to make selection.
NOTE: Motion detection is not guaranteed to catch 100 percent of activity.

Activate Aux Command
Motion detection can be configured to trigger an auxiliary command when motion is detected. The following are the settings for ACTIVATE AUX:
OFF (default): Motion detection will not trigger an AUX command.
1: Triggers a command to AUX 1.
2: Triggers a command to AUX 2.

Aux Time
Aux time is the length of time the auxiliary will remain on after motion is detected. Available settings for AUX TIME are 1 to 60 seconds.

EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.

38

C3463M-B (2/11)

PATTERNS
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

PATTERNS
PATTERN NUMBER
<PROGRAM PATTERN>
<CLEAR PATTERN>
<EDIT SCHEDULE>
BACK
EXIT
REFERENCE INFORMATION
PATTERN USAGE
REMAINING

A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can be recalled with a command from a controller or
automatically by a configured function (alarm, park, event, or power-up).
The 23X models have one user-defined pattern available. The 27X and 35X models can handle up to eight patterns. Pattern length is based upon
memory usage rather than a fixed amount of time. The complexity of a pattern will determine the amount of storage available to configure other
patterns.
NOTE: In most cases, the memory available will allow for ample time to schedule typical patterns. If the scheduled patterns are unusually
lengthy or complex, there is a possibility that there may not be enough remaining memory to configure all eight patterns for the 27X and 35X
models.
To configure a pattern:
1. Use the joystick to position the cursor beside PATTERN NUMBER. Press Iris Open. The cursor moves to the right.
2. Move the joystick up or down to view selections. Press Iris Open to enter selection.
3. Use the joystick to position the cursor beside PROGRAM PATTERN.
4. Press Iris Open. The Patterns configuration window appears.
5. Follow the directions displayed on the monitor.
After a pattern is configured, the remaining storage percentage is displayed on the screen. This is the amount of memory available to configure
the remaining patterns.
To clear a pattern:
1. Use the joystick to position the cursor beside CLEAR PATTERN.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
To edit the pattern schedule:
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.
NOTE: When configuring one or more presets within a pattern, use the normal controller commands to call a preset. Not all controllers can start
all patterns. However, any of the patterns can be automatically started with park, power-up, event, and alarm functions.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

39

ZONES
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS

ZONES
ZONE NUMBER
* * * ZONE NOT DEFINED * * *

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

<EDIT ZONE LABEL>
<EDIT ZONE>
ZONE ENABLED
ZONE BLANKING
<CLEAR ZONE>
BACK
EXIT

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. Spectra IV dome systems are capable of eight zones, each
with a 20-character label.
To configure a zone:
1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open, and the cursor moves to the right.
2. Move the joystick up or down to view selections. Press Iris Open to enter selection.
3. Use the joystick to position the cursor beside EDIT ZONE.
4. Press Iris Open. The Zone configuration window appears.
5. Follow the directions displayed on the monitor. After the left and right limit stops are set, the Zones menu reappears with the ZONE
ENABLED option set to YES.
To edit a zone label:
1. Use the joystick to position the cursor beside EDIT ZONE LABEL.
2. Press Iris Open. The following information appears:
LABEL FOR ZONE
ZONE NUMBER -----1234567890
OK
ABCDEFGHIJ
CANCEL
KLMNOPQRST
UVWXYZ.,-/
BACKSPACE
abcdefghij
SPACE
klmnopqrst
uvwxyz*;:

3. Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside
BACKSPACE, and then press Iris Open.
4. When the label is completed, move the cursor to OK. Press Iris Open to return to the Zones menu.
To disable a zone (a zone is enabled automatically when it is configured) or to blank a zone:
1. Move the cursor beside ZONE ENABLED or ZONE BLANKING.
2. Press Iris Open. The cursor moves to the right.
3. Move the joystick up or down to view selections. Press Iris Open to enter selection.
To clear a zone:
1. Use the joystick to position the cursor beside CLEAR ZONE.
2. Press Iris Open. Follow the instructions on the screen.

*This setting applies to Pressurized Spectra IV dome systems only.
40

C3463M-B (2/11)

WINDOW BLANKING
DOME SETTINGS

SPECTRA IV

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

WINDOW BLANKING

SET WINDOWS

STYLE

WINDOW NUMBER

BLANK ALL ABOVE
BLANK ALL BELOW

<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
<EDIT SCHEDULE>

<SET WINDOWS>

ENABLE WINDOW
REVERSE
CLEAR WINDOW

BACK
EXIT

BACK
EXIT

Window blanking allows a user to configure the four-sided areas that cannot be viewed by the operator of the dome system. A blanked area will
move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide.
The 23X models have four user-defined windows blank available. The 27X and 35X models have eight available user-defined window blanks.
Spectra IV dome systems have two styles of window blanking: Gray and Smear. If the style is set to Gray, the blanked area is covered with a solid
gray window. If Smear is selected images behind the window will be noticeable but not distinguishable.
To set a window blanking area:
1. Use the joystick to position the cursor beside WINDOW BLANKING. Press Iris Open. The WINDOW BLANKING menu appears on the screen.
2. Move the joystick to position the cursor beside SET WINDOWS. Press Iris Open to enter.
3. Position the cursor beside WINDOW NUMBER. Press Iris Open. The cursor moves to the right.
4. Move the joystick up or down to view selections. Press Iris Open to enter selection.
5. Use the joystick to position the cursor beside EDIT WINDOW LOCATION. Press Iris Open, and then follow the instructions that appear on
the screen. When all four corners are set, the SET WINDOWS menu reappears, the blanked area is displayed, and the ENABLE WINDOW
option is set to YES.
NOTES:
•

Use the outside corner of the window selection tool as a guide when selecting the upper left, upper right, bottom right, and bottom left
corners of the window.
OUTSIDE CORNER

Figure 5. Window Selection Tool

C3463M-B (2/11)

41

•

Set windows are not visible when editing a new window location.

Disabled

Enabled
Figure 6. Window Blanking

6. The blanked area can be configured to turn on or off at a specified zoom point. To set the zoom point:
a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press Iris Open.
b.

Zoom in to the point where you want window blanking to turn on. Press Iris Open to set the zoom point.

NOTES:
•

Since the area is already blanked out, it may be difficult to determine when you want window blanking to turn on. Reverse the window
before setting the zoom point. When finished reverse the window again to blank out the area.

•

Increase the size of the window if any part of the blanked area is revealed during PTZ operations.

EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.

REVERSE
A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area
remain visible. Reversing the window a second time will return it to its original condition.

CLEAR WINDOW
All areas that have been set for window blanking are cleared.

42

C3463M-B (2/11)

BLANK ALL ABOVE/BLANK ALL BELOW
The Blank All Above and Blank All Below options add additional flexibility to setting up privacy areas. These settings are ideal for applications
where a complete pan location needs to be blanked.
Table E. Window Blank Settings
Blank All Above
Tilt Angle

Blank All Below

Blanked Area

Tilt Angle

Blanked Area

OFF

No blanking

OFF

No blanking

15

15° above horizon to 18° above horizon

—

—

10

10° above horizon to 18° above horizon

—

—

0

Horizon to 18° above horizon

0

Horizon to 92° below horizon

–10

18° above horizon to 10° below horizon

–10

10° to 92° below horizon

–20

18° above horizon to 20° below horizon

–20

20° to 92° below horizon

–30

18° above horizon to 30° below horizon

–30

30° to 92° below horizon

–40

18° above horizon to 40° below horizon

–40

40° to 92° below horizon

–50

18° above horizon to 50° below horizon

–50

50° to 92° below horizon

–60

18° above horizon to 60° below horizon

–60

60° to 92° below horizon

–70

18° above horizon to 70° below horizon

–70

70° to 92° below horizon

–80

18° above horizon to 80° below horizon

–80

80° to 92° below horizon

18˚
15˚
10˚

CAMERA

HORIZON
10˚

20˚
30˚

40

˚

˚

50
60˚

70˚

80˚

Figure 7. Window Blank Tilt Angles

C3463M-B (2/11)

43

ALARMS
DOME SETTINGS

SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

ALARMS
RESUME
SEQUENCE (SECS)
RESET DELAY (SECS)
<ALARM SETTINGS>
BACK
EXIT

ALARM SETTINGS
ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT
<EDIT SCHEDULE>
BACK
EXIT

The 23X models have one alarm input available. The 27X and 35X models have seven alarm inputs. Alarm inputs can be configured as high,
medium, or low priority. When an alarm is received, an input signal to the dome triggers the user-defined action (go to preset, run pattern, etc.)
configured for the alarm.
NOTE: Refer to the notation in step 6 for the limited alarm features available for 23X models.
There are three global alarm settings:
RESUME: This mode lets the dome resume its previous activity (scan, pattern, or previous position) after all alarms are cleared.
SEQUENCE: This is the time the dome will perform an alarm activity when more than one alarm of the same priority occurs at the same time.
RESET DELAY: This is the amount of time the dome considers the alarm to be active after it has physically cleared.
Use the following steps to configure the alarm settings.
1. Use the joystick to position the cursor beside ALARM SETTINGS. Press Iris Open.
2. Select the alarm number:
a. Use the joystick to position the cursor beside ALARM NUMBER.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view selections. Press Iris Open to enter selection.

3. Select the alarm priority:
a. Use the joystick to position the cursor beside ALARM PRIORITY.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If
multiple alarms with different priorities are active at the same time, the dome will only go to the alarms with the highest priority.

d.

Press Iris Open to enter selection.
HIGH: Alarm action takes highest priority and will override manual PTZ control.
MEDIUM/LOW: Alarm action will not occur if an alarm occurs during manual pan, tilt, and zoom control.

*This setting applies to Pressurized Spectra IV dome systems only.
44

C3463M-B (2/11)

4. Set the alarm action:
a. Use the joystick to position the cursor beside ALARM ACTION.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view the available selections. The following are the settings for alarm action:
NONE: No action when alarm is triggered.
AUTO SCAN: Dome starts auto scan operation when alarm is triggered.
FRAME SCAN: Dome starts frame scan operation when alarm is triggered.
RANDOM SCAN: Dome starts random scan operation when alarm is triggered.
PRESET: Dome goes to the preset that is the same as the alarm number. For example, Preset 1 will go to Alarm 1.
PATTERN 1: Dome runs pattern 1 when an alarm is triggered.
PATTERN 2: Dome runs pattern 2 when an alarm is triggered.
PATTERN 3: Dome runs pattern 3 when an alarm is triggered.
PATTERN 4: Dome runs pattern 4 when an alarm is triggered.
PATTERN 5: Dome runs pattern 5 when an alarm is triggered.
PATTERN 6: Dome runs pattern 6 when an alarm is triggered.
PATTERN 7: Dome runs pattern 7 when an alarm is triggered.
PATTERN 8: Dome runs pattern 8 when an alarm is triggered.

d.

Press Iris Open to enter selection.

5. Set the auxiliary to activate:
a. Use the joystick to position the cursor beside ACTIVATE AUX.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view the following available selections.
NO (default): Not activated.
1: An alarm action will close AUX 1.
2: An alarm action will close AUX 2.

d.

Press Iris Open to enter selection.

NOTE: The AUX 1/AUX2 will stop when all the alarms assigned to it have cleared. If the AUX1/AUX is set up as momentary, then it will be
activated each time a new alarm is activated.
6. Set the alarm contact:
a. Use the joystick to position the cursor beside ALARM CONTACT.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view the following available selections.
N/O (default): Normally open.
N/C: Normally closed.

d.

Press Iris Open to enter selection.
NOTE: The alarm contact feature is functional and available for 23X models only if the dome drive is installed in a Spectra III SE or
Spectra IV SE back box.

7. To edit the alarm schedule:
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.

C3463M-B (2/11)

45

AUX
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

AUX
AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)
<EDIT SCHEDULE>

TOGGLE
1
TOGGLE
1

BACK
EXIT

An auxiliary output is a configurable signal from the dome back box that can trigger another device to operate. An auxiliary output can be
configured to trigger from an alarm or from a controller.
An AUX 1 command from the controller will activate the relay in the dome and operate the device that is connected to the relay. The output of
AUX 1 can be connected to the alarm input of a system switch to activate automatic monitor switching and recording.
An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the device that is connected to it.
The following are the available AUX mode settings:
TOGGLE (default): Changes the state of the auxiliary output every time an AUX command is received from the controller.
LATCHING: Must receive an AUX ON/AUX OFF command from the controller to turn the auxiliary output on/off.
MOMENTARY: An AUX ON command from the controller turns the auxiliary output on for the configured DWELL TIME. The auxiliary output will
automatically turn off when the dwell time is finished.

EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.

*This setting applies to Pressurized Spectra IV dome systems only.
46

C3463M-B (2/11)

TITLE TEXT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

TITLE TEXT

DOME SETTINGS

ENABLE TITLE TEXT
<EDIT TITLE TEXT>

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

BACK
EXIT

Title text is the label used to identify the camera viewed on the monitor. Up to 20 characters can be used for a title.
To edit the title text label, do the following:
1. Use the joystick to position the cursor beside EDIT TITLE TEXT.
2. Press Iris Open. The following information appears:
EDIT TITLE TEXT
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*

OK
CANCEL
BACKSPACE
SPACE

3. Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a character, position the cursor
beside BACKSPACE, and then press Iris Open.
4. When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.
5. Enable the title text label by doing the following:
a. Move the cursor beside ENABLE TITLE TEXT.
b.

Press Iris Open. The cursor moves to the right.

c.

Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

47

ALERT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS

ALERT
REPEAT
ACK ACTION
ACTIVATE AUX
<CURRENT READING>
RESET ALERT

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

BACK
EXIT

NOTE: The Alert option applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this
menu item.
Sensors strategically placed inside the pressurized dome system continually monitor pressure, temperature, and dew point. If internal conditions
reach unacceptable levels, an alert message appears on the screen describing the alert condition. For example, if pressure drops below 1 psig,
LOW PRESSURE is displayed.
The following system conditions will trigger an alert message:
System Condition

Alert Message

Temperature is above 140°F (60°C)

HIGH TEMPERATURE

Temperature is below –40°F (–40°C)

LOW TEMPERATURE

Pressure is above 13 PSIG

HIGH PRESSURE

Pressure is below 1 PSIG

LOW PRESSURE

The difference between the temperature and
the dew point is less than or equal to 3°C.

DEW POINT (HIGH HUMIDITY)

The alert message will be repeatedly displayed until the system controller acknowledges the alert condition by selecting ACK ALERT in the main
menu. Once acknowledged, the alert message changes to the configured acknowledge action (ACK ACTION). If the alert condition remains active
after a period of time, the alert message reappears on the monitor, restarting the alert message cycle. This cycle will continue to repeat until the
alert condition is resolved.

REPEAT
This setting programs how often an alert message is repeatedly displayed until the system controller acknowledges the alert condition. The
following are the settings:
CONSTANT: The alert message is continuously displayed until acknowledged.
15 MIN: The alert message is displayed every 15 minutes for a 15-second duration until acknowledged.
30 MIN: The alert message is displayed every 30 minutes for a 15-second duration until acknowledged.
60 MIN: The alert message is displayed every 60 minutes for a 15-second duration until acknowledged.
OFF: The alert message is disabled and will not be displayed.

ACK ACTION
Set ACK ACTION to configure the frequency at which an alert message is displayed after the alert condition has been acknowledged. The
following settings are available:
ALWAYS ON: The alert message is displayed until alert conditions are cleared.
OFF 8 HRS: The alert message is turned off for 8 hours. Message returns after 8 hours if the alert condition persists.
OFF 24 HRS: The alert message is turned off for 24 hours. Message returns after 24 hours if the alert condition persists.
OFF 48 HRS: The alert message is turned off for 48 hours. Message returns after 48 hours if the alert condition persists.

48

C3463M-B (2/11)

ACTIVATE AUX
This setting activates an auxiliary when an alert condition exists. Settings include the following options:
NONE (default): Not activated.
1: An alert condition will close AUX 1.
2: An alert condition will close AUX 2.

CURRENT READING
The Current Reading menu displays the existing status of temperature, pressure, and dew point inside the dome system. An arrow displayed to
the left of a menu item denotes that an alert condition exists.
CURRENT READING
TEMPERATURE
DEWPOINT
PRESSURE
REFRESH
BACK
EXIT

An up arrow indicates the reading is over the threshold. A down arrow indicates the reading is below the threshold.
The high temperature alert occurs if the temperature is above 140°F (60°C).
The low temperature alert occurs if the temperature is below –40°F (–40°C).
The high pressure alert occurs if the pressure is above 13 PSIG.
The low pressure alert occurs if the pressure is below 1 PSIG.
The dew point (high humidity) alert occurs if the difference between the temperature and the dew point is less than or equal to 3°C.
NOTE: The normal operating temperature inside the unit will be greater than the temperature outside the back box due to the heat emitted by
the system’s electronics.

RESET ALERT
Reset alert clears the alert condition and removes the alert label from the monitor. The system automatically checks internal conditions 60
seconds after reset. If conditions are still unacceptable, the alert label reappears on the screen indicating further corrective action is required.

C3463M-B (2/11)

49

CLEAR
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
CLEAR ALL EVENTS
RESTORE FACTORY DEFAULTS
BACK
EXIT

Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available settings:
ALL ZONES: Clears all zones. To clear a single zone, refer to Zones on page 40.
ALL PRESETS: Clears all presets. To clear a single preset, refer to Presets on page 34.
ALL PATTERNS: Clears all patterns. To clear a single pattern, refer to Patterns on page 39.
ALL WINDOW BLANKING: Clears all blanked windows. To clear a single blanked window, refer to Window Blanking on page 41.
CLEAR ALL EVENTS: Clears all events. To clear a single event, refer to Event on page 53.
RESTORE FACTORY DEFAULTS: Restores all camera settings to factory default settings.

PASSWORD
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT

EDIT THE PASSWORD
---------1234567890
OK
ABCDEFGHIJ
CANCEL
KLMNOPQRST
UVWXYZ.,-/
BACKSPACE
abcdefghij
SPACE
klmnopqrst
uvwxyz*;:

Spectra IV dome systems feature password protection to prevent unauthorized changes to the dome settings. An operator can open the System
Information and Display Setup menus, but cannot access any of the dome settings menus.
Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set a preset, pattern, or zone, the Enter
Password menu appears. The password must be entered before you can continue configuring the system.
At least one character must be entered to create a valid password.

*This setting applies to Pressurized Spectra IV dome systems only.
50

C3463M-B (2/11)

CLOCK
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

CLOCK

DOME SETTINGS

SPECTRA IV
LANGUAGE

<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

TIME BASE
TIME FORMAT
SET TIME
DATE FORMAT
SET DATE
DAYLIGHT SAVINGS
BACK
EXIT

The clock is used to set the current date and time. The date and time set in the Clock menu is used to configure events. The date and time can
also be displayed on the monitor when the menus are not being accessed.
To set the clock, do the following:
1. Use the joystick to position the cursor beside TIME BASE. Press Iris Open. The following are the settings for time base:
POWER LINE: This is the most accurate time base and is the preferred selection in areas with a stable power line frequency.
INTERNAL CLOCK: The internal clock should be used in areas where the power line frequency is not accurate.
a.

Move the joystick up or down to view the selections.

b.

Press Iris Open to select INTERNAL CLOCK or POWER LINE.

2. Use the joystick to position the cursor beside TIME FORMAT. Press Iris Open. Move the joystick up or down to view the selections. Select 12
HOUR or 24 HOUR, and then press Iris Open to confirm the time format.
3. Use the joystick to position the cursor beside SET TIME. Press Iris Open. Scroll through the hours until the desired time appears. Use the
joystick to move the cursor to the right. Scroll through the minutes until the desired time appears. Press Iris Open to select the time.
4. Use the joystick to position the cursor beside DATE FORMAT. Press Iris Open. Move the joystick up or down to select MM/DD/YYYY or DD/
MM/YYYY. Press Iris Open to confirm the date format.
5. Use the joystick to position the cursor beside SET DATE. Press Iris Open. Scroll through the days, months, and years until the desired
number appears. Press Iris Open to select the date.
6. Use the joystick to position the cursor beside DAYLIGHT SAVINGS. Press Iris Open. The following are the settings for daylight savings:
OFF: Daylight saving time will be turned off.
FIXED DATE: Daylight saving time occurs on the same date each year.
RELATIVE DATE: Daylight saving time occurs on a different date each year, such as the first Sunday in April.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

51

7. If FIXED DATE was selected, the following information appears:
CLOCK
TIME BASE
TIME FORMAT
SET TIME

INTERNAL CLOCK
12 HOUR
00:00 AM

DATE FORMAT
SET DATE

MM/DD/YYYY
00/00/0000

DAYLIGHT SAVINGS
TIME SHIFT
START DATE
MONTH
DAY
START TIME

FIXED DATE
1 HOUR
MARCH
1
02:00 AM

END DATE
MONTH
DAY
END TIME

NOVEMBER
1
02:00 AM

BACK
EXIT

a.

Use the joystick to position the cursor beside TIME SHIFT. Press Iris Open. Scroll through the options until the desired selection
appears. Press Iris Open to select the time shift.

b.

Use the joystick to position the cursor beside the start date MONTH. Press Iris Open. Scroll through the options until the desired
month appears. Press Iris Open to select the month.

c.

Use the joystick to position the cursor beside the start date DAY. Press Iris Open. Scroll through the options until the desired date
appears. Press Iris Open to select the day.

d.

Use the joystick to position the cursor beside START TIME. Press Iris Open. Scroll through the hours until the desired time appears.
Use the joystick to move the cursor to the right. Scroll through the minutes until the desired time appears. Press Iris Open to select the
start time.

e.

Repeat steps b through d for the ending date and time.

8. If RELATIVE DATE was selected, the following information appears:
CLOCK
TIME BASE
TIME FORMAT
SET TIME

INTERNAL CLOCK
12 HOUR
00:00 AM

DATE FORMAT
SET DATE

MM/DD/YYYY
00/00/0000

DAYLIGHT SAVINGS
TIME SHIFT
START DATE
MONTH
WEEK
DAY
START TIME
END DATE
MONTH
WEEK
DAY
END TIME

RELATIVE DATE
1 HOUR
MARCH
2ND
MONDAY
02:00 AM

NOVEMBER
1ST
MONDAY
02:00 AM

BACK
EXIT

Follow the instructions in step 7 for FIXED DATE, adding WEEK.

52

C3463M-B (2/11)

EVENT
(Applies to 27X and 35X models only.)
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

EVENT

DOME SETTINGS
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT

EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL>
<EDIT EVENT>
<CLEAR EVENT>
<LIST EVENT>
HOLIDAY
<EDIT HOLIDAY>
<CLEAR HOLIDAY>
<LIST HOLIDAYS>
BACK
EXIT
REFERENCE INFORMATION

An event is a preconfigured camera, park, scan, preset, pattern, window blanking, alarm, or auxiliary function that can be performed
automatically at a specific date and time.
For example, suppose a camera is set to run in a continuous pattern that scans a parking lot during business hours Monday through Friday. On
Saturday and Sunday the camera needs to stop running the pattern and observe a gate. First, configure a preset to set the camera to observe the
gate. Second, schedule an event to activate the preset on the weekends. Finally, a second, separate event must be scheduled to end the first
event and allow the camera to return to the pattern on Monday.
NOTE: Events do not have a selectable duration. A second event must be scheduled to end a previous event.
Events can be configured from the Preset, Pattern, Window Blanking, Alarm, or Aux menus, or they can be configured from the Event menu.
Events are managed individually or as a group from the Event menu.

EVENT TYPE
Any of the available event types can be selected from this menu, or you may select ALL EVENTS to view and manage the events as a group.The
following are the settings for event type:
SCAN: A scan event executes a specified scan (random, auto, or frame scan) using the limit stops and scan speed defined in the Motion menu.
Refer to Motion Settings on page 29.
PARK: A park event executes the user-defined park action as specified in the Motion menu. Refer to Park Action on page 30.
WINDOW BLANKING: A window blanking event activates or deactivates a previously defined window blank. The window blank remains
activated or deactivated until another configured event changes the state of the window or you modify it through the Window Blanking menu.
Refer to Window Blanking on page 41.
AUX: An auxiliary event turns on/off an auxiliary output when the event triggers. Refer to Aux on page 46.
ALARM: An alarm event executes the action associated with the specified alarm number. Refer to Alarms on page 44.
PATTERN: A pattern event starts a previously defined pattern when the event is triggered. Refer to Patterns on page 39.
CAMERA: A camera event assigns the camera settings of a preset to the current camera settings located in the Camera menu. Refer to Camera
on page 23. The preset that is referenced by the event must be defined prior to setting up a camera event.
For the camera event to function, the referenced preset must have Custom Camera Settings activated. Refer to Presets on page 34.
ALL ALARMS: An all alarms event enables or disables the reporting of all alarms when the event is triggered.
PRESET: A preset event executes a previously defined preset when the event is triggered. Refer to Presets on page 34.
NOTES:
•

If you have camera settings defined in the Camera menu that you wish to restore following a camera event which overwrites those
settings, you must save the original settings as a separate preset prior to the camera event being triggered. You can then set a second
camera event to call the preset that has the original settings saved. Camera settings can also be changed manually from the Camera menu
following the original camera event.

•

The event type cannot be changed if you are accessing it through the Edit Schedule option from the Preset, Pattern, Window Blanking,
Alarm, or Aux menu.

*This setting applies to Pressurized Spectra IV dome systems only.
C3463M-B (2/11)

53

EVENT LABEL
Set the event label to NEW to create a new event.
Use the following steps to manage an existing event.
1. Use the joystick to position the cursor beside EVENT LABEL. Press Iris Open.
2. Move the joystick up or down to scroll through the events. Press Iris Open to enter selection.
As you scroll through the events, the reference information at the bottom of the screen displays the corresponding details for each event. To
view a list of all events and their details, refer to List Event on page 55.

EDIT EVENT LABEL
After an event is configured, the label can be changed using the following steps:
1. Use the joystick to position the cursor beside EDIT EVENT LABEL.
2. Press Iris Open. The following information appears:
EDIT EVENT LABEL
EVENT 1
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*

OK
CANCEL
BACKSPACE
SPACE

3. Use the joystick to position the cursor beside a character. Press Iris Open to enter the selection. To clear a character, position the cursor
beside BACKSPACE, and then press Iris Open.
4. When the label is completed, move the cursor to OK. Press Iris Open to return to the Edit Schedule menu.
After an event is labeled, the label will be displayed when the event is activated according to the display setup values for this label. Refer to
Display Setup on page 21 for instructions on how to change the way a label is displayed on the monitor.

EDIT EVENT
Use the following steps to edit an event.
1. Use the joystick to position the cursor beside EDIT EVENT.
2. Press Iris Open. The following information appears:
EDIT EVENT
EVENT LABEL

EVENT 1

EVENT ACTIVE
EVENT TIME
EVENT OCCURS
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
HOLIDAY

NO
12:00 AM

EVENT TYPE
NUMBER

OFF
OFF
OFF
OFF
OFF
OFF
OFF
SKIP HOLIDAYS
PRESET
1

BACK
EXIT

54

a.

Use the joystick to position the cursor beside EVENT ACTIVE. Press Iris Open. Scroll to select NO to leave the event inactive or YES to
activate the event. Press Iris Open to confirm your selection.

b.

Use the joystick to position the cursor beside EVENT TIME. Press Iris Open. Scroll through the hours until the desired time appears. Use
the joystick to move the cursor to the right. Scroll through the minutes until the desired time appears. Press Iris Open to select the time.

c.

Use the joystick to position the cursor beside SUNDAY. Press Iris Open. The available options are OFF and ON. Press Iris Open to
confirm your selection.

C3463M-B (2/11)

d.

Follow the instructions in the previous step for the remaining days of the week.

e.

Use the joystick to position the cursor beside HOLIDAY. Press Iris Open. The following are the holiday settings:
SKIP HOLIDAYS: The event will not occur on a day of the week for which it is set if that date is in the list of holidays.
ON: The event will activate on holidays that are set in the Event menu, in addition to its normally scheduled days of the week.
OFF: The event only occurs on the days of the week that it is scheduled; holidays have no effect on the event.

CLEAR EVENT
To clear an event:
1. Use the joystick to position the cursor beside CLEAR EVENT.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.

LIST EVENT
To list events:
1. Use the joystick to position the cursor beside LIST EVENT.
2. Press Iris Open.
3. All configured events will be listed.

HOLIDAY
Use the following steps to create a new holiday.
1. Use the joystick to position the cursor beside HOLIDAY. Press Iris Open.
2. Move the joystick up or down to scroll through the options. If no holidays were created in the past, NEW is the only selectable option. Press
Iris Open to select NEW.
3. Proceed to Edit Holiday on page 55.
Use the following steps to manage an existing holiday.
1. Use the joystick to position the cursor beside HOLIDAY. Press Iris Open.
2. Move the joystick up or down to scroll through the holidays. Press Iris Open to enter a selection.
3. Proceed to Edit Holiday on page 55.
NOTE: Holidays cannot be changed through the Edit Schedule option from the Preset, Pattern, Window Blanking, Alarm, or Aux menus.

EDIT HOLIDAY
Use the following steps to edit a holiday:
1. Use the joystick to position the cursor beside EDIT EVENT LABEL.
2. Press Iris Open.
3. Use the joystick to position the cursor beside OCCURRENCE. Press Iris Open. The following are the settings for Occurrence:
FIXED DATE: The holiday occurs on the same date each year.
RELATIVE DATE: The holiday occurs on a different date each year, such as the third Sunday in April.

C3463M-B (2/11)

55

4. If FIXED DATE was selected as the occurrence, the following information appears:
EDIT HOLIDAY
OCCURRENCE
MONTH
DAY

FIXED DATE
JANUARY
1

BACK
EXIT

a.

Use the joystick to position the cursor beside MONTH. Press Iris Open. Scroll through the options until the desired month appears.
Press Iris Open to select the month.

b.

Use the joystick to position the cursor beside DAY. Press Iris Open. Scroll through the options until the desired date appears. Press Iris
Open to select the day.

5. If RELATIVE DATE was selected as the occurrence:
a. Use the joystick to position the cursor beside MONTH. Press Iris Open. Scroll through the options until the desired month appears.
Press Iris Open to select the month.
b.

Use the joystick to position the cursor beside WEEK. Press Iris Open. Scroll through the options until the desired week appears. Press
Iris Open to select the week.

c.

Use the joystick to position the cursor beside DAY. Press Iris Open. Scroll through the options until the desired day of the week
appears. Press Iris Open to select the day.

CLEAR HOLIDAY
To clear a holiday:
1. Use the joystick to position the cursor beside CLEAR HOLIDAY.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.

LIST HOLIDAYS
To list events:
1. Use the joystick to position the cursor beside LIST HOLIDAYS.
2. Press Iris Open.
3. All configured holidays will be listed.

56

C3463M-B (2/11)

SCHEDULED EVENTS
Use this page to record scheduled events.
EVENT NUMBER

EVENT TYPE

LABEL

TIME

OCCURS

HOLIDAY

Example: 1

Preset

Weekend

11:00 AM

Sat–Sun

Skips Holidays

Description: Camera focuses on gate on weekends when the office is closed.
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________

C3463M-B (2/11)

57

Reset, Cycle Power, Reboot
SPECTRA IV
LANGUAGE

ENGLISH

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT

RESET CAMERA
Use this function to reset all camera settings to factory default parameters.

CYCLE CAMERA POWER
If the camera is not operating or if you lose camera control, cycle camera power. Cycling camera power resets the camera but does not change
any saved camera settings.

REBOOT SYSTEM
Reboot the system if it is not operating or if there is no control. Rebooting the system will cycle dome and camera power without changing the
configured dome settings.

58

C3463M-B (2/11)

Software/Language File Upload
The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A
Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port
box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).
For instructions on how to upload revised operating software and language files refer to the Installation/Operation manual supplied with the
field service tool.
NOTE: Only perform software uploads when necessary. Software uploads do not need to be performed if the dome system is operating properly.
During a software/language file upload, a progress bar will appear indicating that data is being transferred to the Spectra dome system. The
default setting for data transmission is 115.2 KB per second. Noisy and long-run connections will slow the transmission rate.

C3463M-B (2/11)

59

Maintenance
The Spectra IV dome systems do not require any special maintenance.
Occasionally, dust may build up on the inside or the outside of the dome. If this occurs, turn power off to the unit and remove the lower dome
from the back box. Remove the dust from the lower dome using compressed air from a spray can. Replace the lower dome following the
installation instructions that were shipped with it.
Warning: Proper eye protection should be worn when using compressed air cans.

60

C3463M-B (2/11)

Specifications
23X MODELS
DD423
Signal Format

NTSC

Scanning System

2:1 Interlace

Image Sensor

1/4-inch progressive scan CCD

Effective Pixels

768 (H) X 494 (V)

Horizontal Resolution

540 TV lines

Lens

f/1.6 (focal length, 3.6 ~ 82.8 mm; 23X optical zoom, 12X digital zoom)

Zoom Speed (optical range)

2.9/4.2/5.8 seconds

Horizontal Angle of View

54° at 3.6 mm wide zoom; 2.5° at 82.8 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.65 lux at 1/60 sec shutter speed (color)
0.15 lux at 1/60 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/2 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

DD423-X
Signal Format

PAL

Scanning System

2:1 Interlace

Image Sensor

1/4-inch progressive scan CCD

Effective Pixels

752 (H) X 582 (V)

Horizontal Resolution

540 TV lines

Lens

f/1.6 (focal length, 3.6 ~ 82.8 mm; 23X optical zoom, 12X digital zoom)

Zoom Speed

2.9/4.2/5.8 seconds

Horizontal Angle of View

54° at 3.6 mm wide zoom; 2.5° at 82.8 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.55 lux at 1/50 sec shutter speed (color)
0.12 lux at 1/50 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/1.5 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

C3463M-B (2/11)

61

27X MODELS
DD427
Signal Format

NTSC

Scanning System

2:1 Interlace/1:1 Progressive (user-selectable)

Image Sensor

1/4-inch CCD

Effective Pixels

768 (H) X 494 (V)

Horizontal Resolution

>540 TV lines

Lens

f/1.4 (focal length, 3.4 ~ 119 mm; 35X optical zoom, 12X digital zoom)

Zoom Speed (optical range)

3.2/4.6/6.6 seconds

Horizontal Angle of View

55.8° at 3.4 mm wide zoom; 1.7° at 119 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.55 lux at 1/60 sec shutter speed (color)
0.018 lux at 1/2 sec shutter speed (color)
0.00018 lux at 1/2 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/2 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

Wide Dynamic Range

128X

DD427-X
Signal Format

62

PAL

Scanning System

2:1 Interlace/1:1 Progressive (user-selectable)

Image Sensor

1/4-inch CCD

Effective Pixels

752 (H) X 582 (V)

Horizontal Resolution

>540 TV lines

Lens

f/1.4 (focal length, 3.4 ~ 119 mm; 35X optical zoom, 12X digital zoom)

Zoom Speed

3.2/4.6/6.6 seconds

Horizontal Angle of View

55.8° at 3.4 mm wide zoom; 1.7° at 119 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.45 lux at 1/50 sec shutter speed (color)
0.015 lux at 1/1.5 sec shutter speed (color)
0.00015 lux at 1/1.5 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/1.5 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

Wide Dynamic Range

128X

C3463M-B (2/11)

35X MODELS
DD4CBW35
Signal Format

NTSC

Scanning System

2:1 Interlace/1:1 Progressive (user-selectable)

Image Sensor

1/4-inch CCD

Effective Pixels

768 (H) X 494 (V)

Horizontal Resolution

>540 TV lines

Lens

f/1.4 (focal length, 3.4 ~ 119 mm; 35X optical zoom, 12X digital zoom)

Zoom Speed (optical range)

3.2/4.6/6.6 seconds

Horizontal Angle of View

55.8° at 3.4 mm wide zoom; 1.7° at 119 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.55 lux at 1/60 sec shutter speed (color)
0.018 lux at 1/2 sec shutter speed (color)
0.00018 lux at 1/2 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/2 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

Wide Dynamic Range

128X

DD4CBW35-X
Signal Format

PAL

Scanning System

2:1 Interlace/1:1 Progressive (user-selectable)

Image Sensor

1/4-inch CCD

Effective Pixels

752 (H) X 582 (V)

Horizontal Resolution

>540 TV lines

Lens

f/1.4 (focal length, 3.4 ~ 119 mm; 35X optical zoom, 12X digital zoom)

Zoom Speed

3.2/4.6/6.6 seconds

Horizontal Angle of View

55.8° at 3.4 mm wide zoom; 1.7° at 119 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at 35 IRE

0.45 lux at 1/50 sec shutter speed (color)
0.015 lux at 1/1.5 sec shutter speed (color)
0.00015 lux at 1/1.5 sec shutter speed (B-W)

Sync System

Internal/AC line lock, phase adjustable using remote control, V-Sync

White Balance

Automatic with manual override

Shutter Speed

Automatic (electronic iris)/manual; 1/1.5 ~ 1/30,000

Iris Control

Automatic iris control with manual override

Gain Control

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal-to-Noise

>50 dB

Wide Dynamic Range

128X

C3463M-B (2/11)

63

Appendix
Table F. Switch Settings for SW1 Pelco P-Type Control

64

SWITCH SETTING

SPECTRA
ADDRESS

SW1-1

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8
OFF

1

OFF

OFF

OFF

OFF

OFF

OFF

OFF

2

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

3

OFF

ON

OFF

OFF

OFF

OFF

OFF

OFF
OFF

4

ON

ON

OFF

OFF

OFF

OFF

OFF

5

OFF

OFF

ON

OFF

OFF

OFF

OFF

OFF

6

ON

OFF

ON

OFF

OFF

OFF

OFF

OFF

7

OFF

ON

ON

OFF

OFF

OFF

OFF

OFF

8

ON

ON

ON

OFF

OFF

OFF

OFF

OFF

9

OFF

OFF

OFF

ON

OFF

OFF

OFF

OFF

10

ON

OFF

OFF

ON

OFF

OFF

OFF

OFF

11

OFF

ON

OFF

ON

OFF

OFF

OFF

OFF

12

ON

ON

OFF

ON

OFF

OFF

OFF

OFF
OFF

13

OFF

OFF

ON

ON

OFF

OFF

OFF

14

ON

OFF

ON

ON

OFF

OFF

OFF

OFF

15

OFF

ON

ON

ON

OFF

OFF

OFF

OFF

16

ON

ON

ON

ON

OFF

OFF

OFF

OFF

17

OFF

OFF

OFF

OFF

ON

OFF

OFF

OFF

18

ON

OFF

OFF

OFF

ON

OFF

OFF

OFF

19

OFF

ON

OFF

OFF

ON

OFF

OFF

OFF

20

ON

ON

OFF

OFF

ON

OFF

OFF

OFF

21

OFF

OFF

ON

OFF

ON

OFF

OFF

OFF

22

ON

OFF

ON

OFF

ON

OFF

OFF

OFF

23

OFF

ON

ON

OFF

ON

OFF

OFF

OFF

24

ON

ON

ON

OFF

ON

OFF

OFF

OFF
OFF

25

OFF

OFF

OFF

ON

ON

OFF

OFF

26

ON

OFF

OFF

ON

ON

OFF

OFF

OFF

27

OFF

ON

OFF

ON

ON

OFF

OFF

OFF

28

ON

ON

OFF

ON

ON

OFF

OFF

OFF
OFF

29

OFF

OFF

ON

ON

ON

OFF

OFF

30

ON

OFF

ON

ON

ON

OFF

OFF

OFF

31

OFF

ON

ON

ON

ON

OFF

OFF

OFF

32

ON

ON

ON

ON

ON

OFF

OFF

OFF

C3463M-B (2/11)

Table G. Switch Settings for SW1 Pelco D-Type Control (1 of 6)
SPECTRA
ADDRESS

C3463M-B (2/11)

SWITCH SETTING
SW1-1

SW1-2

SW1-3

SW1-4

1

ON

2

OFF

3
4

SW1-5

SW1-6

SW1-7

SW1-8

OFF

OFF

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

OFF

OFF

OFF

OFF

OFF

OFF

5

ON

OFF

6

OFF

ON

ON

OFF

OFF

OFF

OFF

OFF

ON

OFF

OFF

OFF

OFF

OFF

7

ON

ON

ON

OFF

OFF

OFF

OFF

OFF

8

OFF

OFF

OFF

ON

OFF

OFF

OFF

OFF

9

ON

OFF

OFF

ON

OFF

OFF

OFF

OFF

10

OFF

ON

OFF

ON

OFF

OFF

OFF

OFF

11

ON

ON

OFF

ON

OFF

OFF

OFF

OFF

12

OFF

OFF

ON

ON

OFF

OFF

OFF

OFF

13

ON

OFF

ON

ON

OFF

OFF

OFF

OFF

14

OFF

ON

ON

ON

OFF

OFF

OFF

OFF

15

ON

ON

ON

ON

OFF

OFF

OFF

OFF

16

OFF

OFF

OFF

OFF

ON

OFF

OFF

OFF

17

ON

OFF

OFF

OFF

ON

OFF

OFF

OFF

18

OFF

ON

OFF

OFF

ON

OFF

OFF

OFF

19

ON

ON

OFF

OFF

ON

OFF

OFF

OFF

20

OFF

OFF

ON

OFF

ON

OFF

OFF

OFF

21

ON

OFF

ON

OFF

ON

OFF

OFF

OFF

22

OFF

ON

ON

OFF

ON

OFF

OFF

OFF

23

ON

ON

ON

OFF

ON

OFF

OFF

OFF

24

OFF

OFF

OFF

ON

ON

OFF

OFF

OFF

25

ON

OFF

OFF

ON

ON

OFF

OFF

OFF

26

OFF

ON

OFF

ON

ON

OFF

OFF

OFF

27

ON

ON

OFF

ON

ON

OFF

OFF

OFF

28

OFF

OFF

ON

ON

ON

OFF

OFF

OFF

29

ON

OFF

ON

ON

ON

OFF

OFF

OFF

30

OFF

ON

ON

ON

ON

OFF

OFF

OFF

31

ON

ON

ON

ON

ON

OFF

OFF

OFF

32

OFF

OFF

OFF

OFF

OFF

ON

OFF

OFF

33

ON

OFF

OFF

OFF

OFF

ON

OFF

OFF

34

OFF

ON

OFF

OFF

OFF

ON

OFF

OFF

35

ON

ON

OFF

OFF

OFF

ON

OFF

OFF

36

OFF

OFF

ON

OFF

OFF

ON

OFF

OFF

37

ON

OFF

ON

OFF

OFF

ON

OFF

OFF

38

OFF

ON

ON

OFF

OFF

ON

OFF

OFF

39

ON

ON

ON

OFF

OFF

ON

OFF

OFF

40

OFF

OFF

OFF

ON

OFF

ON

OFF

OFF

41

ON

OFF

OFF

ON

OFF

ON

OFF

OFF

42

OFF

ON

OFF

ON

OFF

ON

OFF

OFF

43

ON

ON

OFF

ON

OFF

ON

OFF

OFF

44

OFF

OFF

ON

ON

OFF

ON

OFF

OFF

45

ON

OFF

ON

ON

OFF

ON

OFF

OFF

46

OFF

ON

ON

ON

OFF

ON

OFF

OFF

47

ON

ON

ON

ON

OFF

ON

OFF

OFF

48

OFF

OFF

OFF

OFF

ON

ON

OFF

OFF

49

ON

OFF

OFF

OFF

ON

ON

OFF

OFF

65

Table G. Switch Settings for SW1 Pelco D-Type Control (2 of 6)
SPECTRA
ADDRESS
50

66

SWITCH SETTING
SW1-1

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8

OFF

ON

OFF

OFF

ON

ON

OFF

OFF
OFF

51

ON

ON

OFF

OFF

ON

ON

OFF

52

OFF

OFF

ON

OFF

ON

ON

OFF

OFF

53

ON

OFF

ON

OFF

ON

ON

OFF

OFF

54

OFF

ON

ON

OFF

ON

ON

OFF

OFF
OFF

55

ON

ON

ON

OFF

ON

ON

OFF

56

OFF

OFF

OFF

ON

ON

ON

OFF

OFF

57

ON

OFF

OFF

ON

ON

ON

OFF

OFF

58

OFF

ON

OFF

ON

ON

ON

OFF

OFF

59

ON

ON

OFF

ON

ON

ON

OFF

OFF

60

OFF

OFF

ON

ON

ON

ON

OFF

OFF

61

ON

OFF

ON

ON

ON

ON

OFF

OFF

62

OFF

ON

ON

ON

ON

ON

OFF

OFF
OFF

63

ON

ON

ON

ON

ON

ON

OFF

64

OFF

OFF

OFF

OFF

OFF

OFF

ON

OFF

65

ON

OFF

OFF

OFF

OFF

OFF

ON

OFF

66

OFF

ON

OFF

OFF

OFF

OFF

ON

OFF

67

ON

ON

OFF

OFF

OFF

OFF

ON

OFF

68

OFF

OFF

ON

OFF

OFF

OFF

ON

OFF

69

ON

OFF

ON

OFF

OFF

OFF

ON

OFF

70

OFF

ON

ON

OFF

OFF

OFF

ON

OFF

71

ON

ON

ON

OFF

OFF

OFF

ON

OFF

72

OFF

OFF

OFF

ON

OFF

OFF

ON

OFF

73

ON

OFF

OFF

ON

OFF

OFF

ON

OFF

74

OFF

ON

OFF

ON

OFF

OFF

ON

OFF
OFF

75

ON

ON

OFF

ON

OFF

OFF

ON

76

OFF

OFF

ON

ON

OFF

OFF

ON

OFF

77

ON

OFF

ON

ON

OFF

OFF

ON

OFF

78

OFF

ON

ON

ON

OFF

OFF

ON

OFF

79

ON

ON

ON

ON

OFF

OFF

ON

OFF

80

OFF

OFF

OFF

OFF

ON

OFF

ON

OFF

81

ON

OFF

OFF

OFF

ON

OFF

ON

OFF

82

OFF

ON

OFF

OFF

ON

OFF

ON

OFF

83

ON

ON

OFF

OFF

ON

OFF

ON

OFF

84

OFF

OFF

ON

OFF

ON

OFF

ON

OFF

85

ON

OFF

ON

OFF

ON

OFF

ON

OFF

86

OFF

ON

ON

OFF

ON

OFF

ON

OFF

87

ON

ON

ON

OFF

ON

OFF

ON

OFF

88

OFF

OFF

OFF

ON

ON

OFF

ON

OFF

89

ON

OFF

OFF

ON

ON

OFF

ON

OFF

90

OFF

ON

OFF

ON

ON

OFF

ON

OFF

91

ON

ON

OFF

ON

ON

OFF

ON

OFF

92

OFF

OFF

ON

ON

ON

OFF

ON

OFF

93

ON

OFF

ON

ON

ON

OFF

ON

OFF

94

OFF

ON

ON

ON

ON

OFF

ON

OFF
OFF

95

ON

ON

ON

ON

ON

OFF

ON

96

OFF

OFF

OFF

OFF

OFF

ON

ON

OFF

97

ON

OFF

OFF

OFF

OFF

ON

ON

OFF

98

OFF

ON

OFF

OFF

OFF

ON

ON

OFF

C3463M-B (2/11)

Table G. Switch Settings for SW1 Pelco D-Type Control (3 of 6)
SPECTRA
ADDRESS

C3463M-B (2/11)

SWITCH SETTING
SW1-1

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8

99

ON

ON

OFF

OFF

OFF

ON

ON

OFF

100

OFF

OFF

ON

OFF

OFF

ON

ON

OFF

101

ON

OFF

ON

OFF

OFF

ON

ON

OFF

102

OFF

ON

ON

OFF

OFF

ON

ON

OFF

103

ON

ON

ON

OFF

OFF

ON

ON

OFF

104

OFF

OFF

OFF

ON

OFF

ON

ON

OFF

105

ON

OFF

OFF

ON

OFF

ON

ON

OFF

106

OFF

ON

OFF

ON

OFF

ON

ON

OFF

107

ON

ON

OFF

ON

OFF

ON

ON

OFF

108

OFF

OFF

ON

ON

OFF

ON

ON

OFF

109

ON

OFF

ON

ON

OFF

ON

ON

OFF

110

OFF

ON

ON

ON

OFF

ON

ON

OFF

111

ON

ON

ON

ON

OFF

ON

ON

OFF

112

OFF

OFF

OFF

OFF

ON

ON

ON

OFF

113

ON

OFF

OFF

OFF

ON

ON

ON

OFF

114

OFF

ON

OFF

OFF

ON

ON

ON

OFF

115

ON

ON

OFF

OFF

ON

ON

ON

OFF

116

OFF

OFF

ON

OFF

ON

ON

ON

OFF

117

ON

OFF

ON

OFF

ON

ON

ON

OFF

118

OFF

ON

ON

OFF

ON

ON

ON

OFF

119

ON

ON

ON

OFF

ON

ON

ON

OFF

120

OFF

OFF

OFF

ON

ON

ON

ON

OFF
OFF

121

ON

OFF

OFF

ON

ON

ON

ON

122

OFF

ON

OFF

ON

ON

ON

ON

OFF

123

ON

ON

OFF

ON

ON

ON

ON

OFF

124

OFF

OFF

ON

ON

ON

ON

ON

OFF

125

ON

OFF

ON

ON

ON

ON

ON

OFF

126

OFF

ON

ON

ON

ON

ON

ON

OFF

127

ON

ON

ON

ON

ON

ON

ON

OFF

128

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

129

ON

OFF

OFF

OFF

OFF

OFF

OFF

ON
ON

130

OFF

ON

OFF

OFF

OFF

OFF

OFF

131

ON

ON

OFF

OFF

OFF

OFF

OFF

ON

132

OFF

OFF

ON

OFF

OFF

OFF

OFF

ON

133

ON

OFF

ON

OFF

OFF

OFF

OFF

ON

134

OFF

ON

ON

OFF

OFF

OFF

OFF

ON

135

ON

ON

ON

OFF

OFF

OFF

OFF

ON
ON

136

OFF

OFF

OFF

ON

OFF

OFF

OFF

137

ON

OFF

OFF

ON

OFF

OFF

OFF

ON

138

OFF

ON

OFF

ON

OFF

OFF

OFF

ON

139

ON

ON

OFF

ON

OFF

OFF

OFF

ON

140

OFF

OFF

ON

ON

OFF

OFF

OFF

ON

141

ON

OFF

ON

ON

OFF

OFF

OFF

ON

142

OFF

ON

ON

ON

OFF

OFF

OFF

ON

143

ON

ON

ON

ON

OFF

OFF

OFF

ON
ON

144

OFF

OFF

OFF

OFF

ON

OFF

OFF

145

ON

OFF

OFF

OFF

ON

OFF

OFF

ON

146

OFF

ON

OFF

OFF

ON

OFF

OFF

ON

147

ON

ON

OFF

OFF

ON

OFF

OFF

ON

67

Table G. Switch Settings for SW1 Pelco D-Type Control (4 of 6)
SPECTRA
ADDRESS

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8

OFF

OFF

ON

OFF

ON

OFF

OFF

ON

149

ON

OFF

ON

OFF

ON

OFF

OFF

ON

150

OFF

ON

ON

OFF

ON

OFF

OFF

ON

148

68

SWITCH SETTING
SW1-1

151

ON

ON

ON

OFF

ON

OFF

OFF

ON

152

OFF

OFF

OFF

ON

ON

OFF

OFF

ON

153

ON

OFF

OFF

ON

ON

OFF

OFF

ON

154

OFF

ON

OFF

ON

ON

OFF

OFF

ON

155

ON

ON

OFF

ON

ON

OFF

OFF

ON

156

OFF

OFF

ON

ON

ON

OFF

OFF

ON

157

ON

OFF

ON

ON

ON

OFF

OFF

ON

158

OFF

ON

ON

ON

ON

OFF

OFF

ON

159

ON

ON

ON

ON

ON

OFF

OFF

ON

160

OFF

OFF

OFF

OFF

OFF

ON

OFF

ON

161

ON

OFF

OFF

OFF

OFF

ON

OFF

ON

162

OFF

ON

OFF

OFF

OFF

ON

OFF

ON

163

ON

ON

OFF

OFF

OFF

ON

OFF

ON

164

OFF

OFF

ON

OFF

OFF

ON

OFF

ON

165

ON

OFF

ON

OFF

OFF

ON

OFF

ON

166

OFF

ON

ON

OFF

OFF

ON

OFF

ON

167

ON

ON

ON

OFF

OFF

ON

OFF

ON

168

OFF

OFF

OFF

ON

OFF

ON

OFF

ON

169

ON

OFF

OFF

ON

OFF

ON

OFF

ON
ON

170

OFF

ON

OFF

ON

OFF

ON

OFF

171

ON

ON

OFF

ON

OFF

ON

OFF

ON

172

OFF

OFF

ON

ON

OFF

ON

OFF

ON

173

ON

OFF

ON

ON

OFF

ON

OFF

ON

174

OFF

ON

ON

ON

OFF

ON

OFF

ON

175

ON

ON

ON

ON

OFF

ON

OFF

ON

176

OFF

OFF

OFF

OFF

ON

ON

OFF

ON

177

ON

OFF

OFF

OFF

ON

ON

OFF

ON

178

OFF

ON

OFF

OFF

ON

ON

OFF

ON

179

ON

ON

OFF

OFF

ON

ON

OFF

ON

180

OFF

OFF

ON

OFF

ON

ON

OFF

ON

181

ON

OFF

ON

OFF

ON

ON

OFF

ON
ON

182

OFF

ON

ON

OFF

ON

ON

OFF

183

ON

ON

ON

OFF

ON

ON

OFF

ON

184

OFF

OFF

OFF

ON

ON

ON

OFF

ON

185

ON

OFF

OFF

ON

ON

ON

OFF

ON
ON

186

OFF

ON

OFF

ON

ON

ON

OFF

187

ON

ON

OFF

ON

ON

ON

OFF

ON

188

OFF

OFF

ON

ON

ON

ON

OFF

ON

189

ON

OFF

ON

ON

ON

ON

OFF

ON

190

OFF

ON

ON

ON

ON

ON

OFF

ON

191

ON

ON

ON

ON

ON

ON

OFF

ON

192

OFF

OFF

OFF

OFF

OFF

OFF

ON

ON

193

ON

OFF

OFF

OFF

OFF

OFF

ON

ON

194

OFF

ON

OFF

OFF

OFF

OFF

ON

ON

195

ON

ON

OFF

OFF

OFF

OFF

ON

ON

196

OFF

OFF

ON

OFF

OFF

OFF

ON

ON

C3463M-B (2/11)

Table G. Switch Settings for SW1 Pelco D-Type Control (5 of 6)
SPECTRA
ADDRESS

C3463M-B (2/11)

SWITCH SETTING
SW1-1

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8

197

ON

OFF

ON

OFF

OFF

OFF

ON

ON
ON

198

OFF

ON

ON

OFF

OFF

OFF

ON

199

ON

ON

ON

OFF

OFF

OFF

ON

ON

200

OFF

OFF

OFF

ON

OFF

OFF

ON

ON

201

ON

OFF

OFF

ON

OFF

OFF

ON

ON
ON

202

OFF

ON

OFF

ON

OFF

OFF

ON

203

ON

ON

OFF

ON

OFF

OFF

ON

ON

204

OFF

OFF

ON

ON

OFF

OFF

ON

ON

205

ON

OFF

ON

ON

OFF

OFF

ON

ON

206

OFF

ON

ON

ON

OFF

OFF

ON

ON

207

ON

ON

ON

ON

OFF

OFF

ON

ON

208

OFF

OFF

OFF

OFF

ON

OFF

ON

ON

209

ON

OFF

OFF

OFF

ON

OFF

ON

ON
ON

210

OFF

ON

OFF

OFF

ON

OFF

ON

211

ON

ON

OFF

OFF

ON

OFF

ON

ON

212

OFF

OFF

ON

OFF

ON

OFF

ON

ON

213

ON

OFF

ON

OFF

ON

OFF

ON

ON

214

OFF

ON

ON

OFF

ON

OFF

ON

ON

215

ON

ON

ON

OFF

ON

OFF

ON

ON
ON

216

OFF

OFF

OFF

ON

ON

OFF

ON

217

ON

OFF

OFF

ON

ON

OFF

ON

ON

218

OFF

ON

OFF

ON

ON

OFF

ON

ON

219

ON

ON

OFF

ON

ON

OFF

ON

ON

220

OFF

OFF

ON

ON

ON

OFF

ON

ON

221

ON

OFF

ON

ON

ON

OFF

ON

ON

222

OFF

ON

ON

ON

ON

OFF

ON

ON

223

ON

ON

ON

ON

ON

OFF

ON

ON

224

OFF

OFF

OFF

OFF

OFF

ON

ON

ON

225

ON

OFF

OFF

OFF

OFF

ON

ON

ON
ON

226

OFF

ON

OFF

OFF

OFF

ON

ON

227

ON

ON

OFF

OFF

OFF

ON

ON

ON

228

OFF

OFF

ON

OFF

OFF

ON

ON

ON

229

ON

OFF

ON

OFF

OFF

ON

ON

ON

230

OFF

ON

ON

OFF

OFF

ON

ON

ON

231

ON

ON

ON

OFF

OFF

ON

ON

ON

232

OFF

OFF

OFF

ON

OFF

ON

ON

ON

233

ON

OFF

OFF

ON

OFF

ON

ON

ON
ON

234

OFF

ON

OFF

ON

OFF

ON

ON

235

ON

ON

OFF

ON

OFF

ON

ON

ON

236

OFF

OFF

ON

ON

OFF

ON

ON

ON

237

ON

OFF

ON

ON

OFF

ON

ON

ON
ON

238

OFF

ON

ON

ON

OFF

ON

ON

239

ON

ON

ON

ON

OFF

ON

ON

ON

240

OFF

OFF

OFF

OFF

ON

ON

ON

ON

241

ON

OFF

OFF

OFF

ON

ON

ON

ON

242

OFF

ON

OFF

OFF

ON

ON

ON

ON

243

ON

ON

OFF

OFF

ON

ON

ON

ON

244

OFF

OFF

ON

OFF

ON

ON

ON

ON

245

ON

OFF

ON

OFF

ON

ON

ON

ON

69

Table G. Switch Settings for SW1 Pelco D-Type Control (6 of 6)
SPECTRA
ADDRESS
246

70

SWITCH SETTING
SW1-1

SW1-2

SW1-3

SW1-4

SW1-5

SW1-6

SW1-7

SW1-8

OFF

ON

ON

OFF

ON

ON

ON

ON

247

ON

ON

ON

OFF

ON

ON

ON

ON

248

OFF

OFF

OFF

ON

ON

ON

ON

ON

249

ON

OFF

OFF

ON

ON

ON

ON

ON

250

OFF

ON

OFF

ON

ON

ON

ON

ON

251

ON

ON

OFF

ON

ON

ON

ON

ON

252

OFF

OFF

ON

ON

ON

ON

ON

ON

253

ON

OFF

ON

ON

ON

ON

ON

ON

254

OFF

ON

ON

ON

ON

ON

ON

ON

C3463M-B (2/11)

PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in
material or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
• Five years:
– Fiber optic products
– Unshielded Twisted Pair (UTP) transmission products
– CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and
MC3651H-2X camera models
• Three years:
– Pelco-designed fixed network cameras and network dome cameras with
Sarix™ technology.
– Pelco-branded fixed camera models (CCC1390H Series, C10DN Series,
C10CH Series, and IP3701H Series)
– EH1500 Series enclosures
– Spectra® IV products (including Spectra IV IP)
– Camclosure® Series (IS, ICS, IP) integrated camera systems
– DX Series digital video recorders (except DX9000 Series which is covered
for a period of one year), DVR5100 Series digital video recorders, Digital
Sentry® Series hardware products, DVX Series digital video recorders, and
NVR300 Series network video recorders
– Endura® Series distributed network-based video products
– Genex® Series products (multiplexers, server, and keyboard)
– PMCL200/300/400 Series LCD monitors
– PMCL5xx Series FHD monitors
• Two years:
– Standard varifocal, fixed focal, and motorized zoom lenses
– DF5/DF8 Series fixed dome products
– Legacy® Series integrated positioning systems
– Spectra III™, Spectra Mini, Spectra Mini IP, Esprit®, ExSite®, and PS20
scanners, including when used in continuous motion applications.
– Esprit Ti and TI2500 Series thermal imaging products
– Esprit and WW5700 Series window wiper (excluding wiper blades).
– CM6700/CM6800/CM9700 Series matrix
– Digital Light Processing (DLP®) displays (except lamp and color wheel). The
lamp and color wheel will be covered for a period of 90 days. The air filter is
not covered under warranty.
– Intelli-M® eIDC controllers
• One year:
– Video cassette recorders (VCRs), except video heads. Video heads will be
covered for a period of six months.

• Six months:
– All pan and tilts, scanners, or preset lenses used in continuous motion
applications (preset scan, tour, and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of
Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid
to a Pelco designated location. Repairs made necessary by reason of misuse,
alteration, normal wear, or accident are not covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s liability
for any claim, whether based on breach of contract, negligence, infringement of
any rights of any party or product liability, relating to the Products shall not exceed
the price paid by the Dealer to Pelco for such Products. In no event will Pelco be
liable for any special, incidental, or consequential damages (including loss of use,
loss of profit, and claims of third parties) however caused, whether by the
negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may
also have additional rights, which are subject to variation from state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the
following information:
1. Model and serial number
2. Date of shipment, P.O. number, sales order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product that does not fall under
the warranty conditions stated above, please include a written explanation with
the product when returned.
Method of return shipment shall be the same or equal to the method by which the
item was received by Pelco.
RETURNS
To expedite parts returned for repair or credit, please call Pelco at (800) 289-9100
or (559) 292-1981 to obtain an authorization number (CA number if returned for
credit, and RA number if returned for repair) and designated return location.
All merchandise returned for credit may be subject to a 20 percent restocking and
refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned
CA or RA number and freight should be prepaid.
2-10-10

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

REVISION HISTORY
Manual #
C3463M
C3463M-A
C3463M-B

Date
10/09
1/10
2/11

Comments
Original version.
Revised manual to include new menus and features.
Revised manual for version 2.300 software, which included the addition of the Auto Tracking menu.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates.
All other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.

© Copyright 2011, Pelco, Inc.
All rights reserved.

www.pelco.com

Pelco by Schneider Electric 3500 Pelco Way Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

</pre><hr>Source Exif Data: <br /><pre>File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Keywords                        : 021711
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2011:02:17 12:58:52-08:00
Create Date                     : 2011:02:17 12:53:37Z
Metadata Date                   : 2011:02:17 12:58:52-08:00
Format                          : application/pdf
Title                           : Pelco_Spectra_IV_Series_manual
Creator                         : yurgal, mcclurg
Description                     : C3463M_Spectra_IV_Series.book
Document ID                     : uuid:98e59d45-8e71-4626-89fc-c42611ccd0b9
Instance ID                     : uuid:43af1fac-6a8f-40cf-9d4a-1be08dff1b58
Page Count                      : 72
Subject                         : C3463M_Spectra_IV_Series.book
Author                          : yurgal, mcclurg
</pre>
<small>EXIF Metadata provided by <a href="https://exif.tools/">EXIF.tools</a></small>

<div id="ezoic-pub-ad-placeholder-110">
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<!-- usermanual link ad -->
<ins class="adsbygoogle"
     style="display:block"
     data-ad-client="ca-pub-0545639743190253"
     data-ad-slot="6172135303"
     data-ad-format="link"></ins>
<script>
(adsbygoogle = window.adsbygoogle || []).push({});
</script>
</div>
</div>
				<div id="catlinks" class="catlinks catlinks-allhidden" data-mw="interface"></div>				<div class="visualClear"></div>
							</div>
		</div>
		<div id="mw-navigation">
			<h2>Navigation menu</h2>

			<div id="mw-head">
									<div id="p-personal" role="navigation" class="" aria-labelledby="p-personal-label">
                                                 <!--                              <div id="p-search" role="search">

                                                <form action="https://usermanual.wiki/search.php" id="searchform">
                                                        <div id="simpleSearch">
                                                        <input type="search" name="search" placeholder="Search UserManual.wiki" title="Search UserManual.wiki [ctrl-option-f]" accesskey="f" id="searchInput" tabindex="1" autocomplete="off"><input type="hidden" value="Special:Search" name="title"><input type="submit" name="go" value="Go" title="Find a User Manual" id="searchButton" class="searchButton">                                                 </div>
                                                </form>
                                        </div>-->
                                                <ul>
<li id="pt-mycontris"><a href="https://usermanual.wiki/upload" title="Upload User Manual" accesskey="y">Upload a User Manual</a></li>
</ul>
					</div>
									<div id="left-navigation">
										<div id="p-namespaces" role="navigation" class="vectorTabs" aria-labelledby="p-namespaces-label">
						<h3 id="p-namespaces-label">Versions of this User Manual:</h3>
						<ul>
 <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Pelco/PelcoSpectraC3463MBUsersManual441536.863794361" title="User Manual Wiki" accesskey="c">Wiki Guide</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Pelco/PelcoSpectraC3463MBUsersManual441536.863794361/html" title="HTML" accesskey="c">HTML</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Pelco/PelcoSpectraC3463MBUsersManual441536.863794361/amp" title="Mobile AMP" accesskey="c">Mobile</a></span></li> <li id="ca-nstab-main" class="selected" ><span><a href="https://usermanual.wiki/Pelco/PelcoSpectraC3463MBUsersManual441536.863794361/help" title="Discussion / FAQ / Help" accesskey="c">Download & Help</a></span></li>
													</ul>
					</div>
									</div>
				<div id="right-navigation">
										<div id="p-views" role="navigation" class="vectorTabs" aria-labelledby="p-views-label">
						<h3 id="p-views-label">Views</h3>
						<ul>
													
		<li id="ca-view"><span><a href="#">User Manual</a></span></li>

                                                                                                                        <li  class="selected"  id="ca-edit"><span><a href="https://usermanual.wiki/Pelco/PelcoSpectraC3463MBUsersManual441536.863794361/help" title="Ask a question" accesskey="e">Discussion / Help</a></span></li>

													</ul>
					</div>
									</div>
			</div>
			<div id="mw-panel">
				<div id="p-logo" role="banner"><a class="mw-wiki-logo" href="https://usermanual.wiki/Main_Page" title="Visit the main page"></a></div>
						<div class="portal" role="navigation" id="p-navigation" aria-labelledby="p-navigation-label">
			<h3 id="p-navigation-label">Navigation</h3>

		</div>
			<div class="portal" role="navigation" id="p-tb" aria-labelledby="p-tb-label">


		</div>
				</div>
		</div>
		<div id="footer" role="contentinfo">
							<ul id="footer-info">
											<li id="footer-info-lastmod">© 2026 UserManual.wiki</li>
									</ul>
							<ul id="footer-places">
											<li id="footer-places-privacy"><a href="https://usermanual.wiki/ContactUs" title="UserManual.wiki:Contact Us">Contact Us</a></li>
											<li id="footer-places-about"><a href="https://usermanual.wiki/DMCA" title="UserManual.wiki:DMCA">DMCA</a></li>
									</ul>
										<ul id="footer-icons" class="noprint">
											<li id="footer-poweredbyico">

</li>
									</ul>

		</div>

</div></body></html>
<script src="/cdn-cgi/scripts/7d0fa10a/cloudflare-static/rocket-loader.min.js" data-cf-settings="90aa4bfb9345b809d9026c09-|49" defer></script>