Pelican Accessories ECLP-S-1 Wireless Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	307482
Application ID	akrIbI81fLSPe/tZyBYWNA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.41kB (55175 bits)
Date Submitted	2003-03-05 00:00:00
Date Available	2003-03-05 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual

LIMITED WARRANTY
Pelican Accessories warrants to the original consumer purchaser that
the product will be free from defects in materials and / or workmanship
for a period of 120 days from the date of purchase. If a defect covered
by this warranty occurs during this period, Pelican Accessories at its
option will repair or replace, at no charge, any part that Pelican Accessories
determines to be defective.
To obtain warranty service during the warranty period, send the defective
product postage pre-paid, with a money order for $4.00 to cover the
return postage and handling, along with proof of purchase and the date
of purchase to:
Up to 50 Feet of Range
Over 100 Hours on Two AAs
8 Separate Channels
PELICAN ACCESSORIES
1840 East 27th Street
Vernon, CA 90058
Dual Rumble Motors
This warranty shall not apply if the product has been damaged by abuse,
misuses, negligence, accident, modification, tampering or by any other
causes unrelated to defective materials and / or workmanship.
Forward Positioned Black and
White Buttons
Repair or replacement as provided under this warranty is Pelican
Accessories' exclusive prerogative. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITED
TO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECT
TO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. IN
NO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTAL
DAMAGES RESULT FROM THE BREACH OF ANY EXPRESS OR
IMPLIED WARRANTIES. This warranty gives you specific legal rights,
and you may also have other legal rights,
Which vary from state to state.
Low Battery Indicator
Changes or modifications not expressly approved by the manufacture could void the
user's authority to operate the equipment. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions; (1) this device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For technical questions please visit
http://www.pelicanacc.com
or call us directly at 1-800-331-3844
Pelican and its logo are registered trademarks.
Xbox™ is a registered trademark of
Microsoft Corporation.
This product is not designed, manufactured,
sponsored or endorsed by Microsoft Corporation.
Instruction for Operation:
Eclipse Wireless Controller
LED
Channel Switch
White
Botton
Black
Button
L Botton
R Botton
CHANNEL
1 2 3 4
Analog
Stick
Action
Buttons
OFF ON RUMBLE
OFF
Power
On/OffRumble
Off Switch
BACK
Black
Button
D-Pad
White
Button
Back
Botton
START
Analog
Stick
Start Button
BAND
Band
Switch
Eclipse Wireless Receiver
Memory Card Slots
Link LED (Red)
CHANNEL
1 2 3 4
Channel Switch
SIGNAL
Signal LED (Red)
BAND
Band Switch
PL-2006
PRODUCT OVERVIEW:
Eclipse Wireless Controller uses advance technology which gives you the ability to play without
the limitations of a typical corded controller, hence there are a few switches and LED (lights)
not found on your basic Xbox™ Controller.
Channel Switch (Receiver and Controller):
This switch selects the broadcast channel of the radio frequency. There are four positions;
1, 2, 3 and 4. There is a corresponding Channel Switch on the receiver
Band Switch (Receiver and Controller):
This switch selects the bandwidth. There are two positions; A and B. There is a corresponding
Band Switch on the receiver
Power Switch (Controller):
This switch selects the power mode. There are 3 positions; Off, On, and Rumble Off
INSTRUCTIONS:
1. Insert Batteries:
Remove the battery lid and place the two AA batteries (included) into the Eclipse Wireless
Controller. Make sure they are inserted as shown in the battery compartment. The batteries
included are not long life.
2. Plug in the Receiver:
With the Xbox™ turned off, plug the cable of receiver into controller port one (far left port.)
3. Check Band setting:
Confirm that the Band Switch is set to A on both the controller and the receiver.
Note: the only time you would ever change this switch is if you experienced a drop off in the
signal, causing game play to be suspended. If this happens repeatedly we suggest
you switch to Band B on both the Controller and Receiver.
4. Select a Channel on the Controller:
You may select any channel you desire 1, 2, 3 or 4.
5. Select a Channel on the Receiver:
This must match the channel selected on the Controller.
Note: If using more then one controller you must use different channel settings, i.e., the first
controller and receiver are set to Channel 1, the second controller and receiver are
set to Channel 2. The channel position selected on the Eclipse Wireless Controller
and Receiver have no relation to the Xbox™ controller ports.
6. Turn ON the Controller
Turn the power switch located on the Controller to the ON position - You will see the following:
On the Controller the LED will come on, lit green
Note: If the LED on the pad comes on and goes to Red this is your low battery indicator
meaning your battery has less then 20% power capacity.
On the Receiver, the left LED will come on indicating there is a "Pad in". The right LED will
flash continually indicating the signal is strong
Note: If you wish to extend battery life select the rumble off position. This will turn off the
rumble effect in game play, resulting in a doubling of your battery life.
OTHER FEATURES:
Multiple Players:
You may play with up to four Eclipse Wireless controllers. Check to see that the channel
switches are set as outlined above.
Power Save Mode:
When not in use the Eclipse Wireless controller automatically goes into a sleep mode
to conserve batteries. A touch of any button puts the controller back into play mode.
Note: Turn off the controller when not in use to extend your battery life.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1

EXIF Metadata provided by EXIF.tools