Penclic B3 PENCLIC MOUSE User Manual

Penclic AB PENCLIC MOUSE

User Manual

Download: Penclic B3 PENCLIC MOUSE User Manual
Mirror Download [FCC.gov]Penclic B3 PENCLIC MOUSE User Manual
Document ID2133538
Application IDxP+rLAgH2D8l2sKOajSCQw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.25kB (140660 bits)
Date Submitted2013-12-04 00:00:00
Date Available2013-12-04 00:00:00
Creation Date2013-11-28 16:51:22
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2013-11-28 16:51:22
Document TitleMicrosoft Word - quick guide B3 Certification 20131028.docx
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

WELCOME to the quick guide
Penclic Mouse combines ergonomically sound design with modern mouse technology to bring
you unparalleled precision, comfort and efficiency.
Mouse setup
Insert the battery into the mouse
Charge the battery with the included micro usb charging cable until full.
Set the mouse power switch on the bottom of the mouse to ON
Install the Penclic Mouse B3
Standard PC Bluetooth device installation
Activate the Bluetooth connection on the computer.
Press the button under the mouse to activate the Bluetooth search on the mouse.
Search for Bluetooth devices on your computer.
Select Penclic Mouse B3 once found.
Install the mouse and the Penclic Mouse B3 is ready to use.
Trouble installing your Penclic Mouse B3. Please look at www.penclic.se/troubleshooting
HOW TO USE YOUR Penclic Mouse
1, Hold Penclic Mouse like a pen, the bottom part acts like a traditional mouse.
2, Let your forearm and your hand rest on a surface, while keeping your shoulders relaxed.
3, The pen part can be adjusted to suit specific grips.
Fixate the bottom part with one hand and rotate the pen to the preferred angle with the other.
•
•
•
•
•
•
•
Left click 1
Right click 2
Middle click 3
Scroll wheel 4
On‐off button 5
DPI switch 6
Bluetooth connect button 7
TROUBLESHOOTING
http://www.Penclic.se/troubleshooting
•
•
•
•
Check the battery.
When the battery needs charging the LED on the mouse will show red. When
the battery is fully charged a green light will be displayed.
Cursor movement may be effected by very glossy surfaces.
Trouble connecting finding the Bluetooth connection, please look at
www.penclic.se/troubleshooting
TECHNICAL SPECIFICATIONS
The supported platforms for Penclic Mouse are all operating systems that support
HID 1.1. These include Windows XP or later, Mac OSX version 10.1 or later and
most Linux/BSD flavors. No extra software/driver installation is needed.
•
Bluetooth connection
•
Operates on almost any surface without any pad or tablet.
•
Implements a 3-buttons and scroll wheel mouse.
•
AAA 1.2V NiMH Recharging battery (Everyday use last approximately 3
months before charging is needed).
•
LR 03/AAA/1.5V Alkaline None rechargeable battery can be used. NOTE: DO
NOT RECHARGE
•
Energy saving mode starts after 10 min, press a button to start.
•
Wireless reach, minimum 5 metres.
•
Dpi settings 800-1200-1600.
Measurements:
• Height: 140 mm Base: 44.1 x 20 mm
• Weight: 41 g
TECHNICAL SUPPORT
Should you require additional technical support with your Penclic Mouse™, please
use our Web site for further information or contact our support group through email. Call Technical Support during business hours, central European time plus one
hour.
Contact: + 46 8 544 98 995 or email: info@penclic.se
All rights reserved of Bluetooth® is owned by Bluetooth SIG and is used under licence.
SPRÅK: ord på 13 språk
Svenska, norska, danska, finska, tyska, franska, spanska, italienska, holländska,
portugisiska, turkiska och grekiska. + polska
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
IC WARNING
This device complies with Industry Canada RSS‐210 standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a PCB and maximum ‐1.2dBi gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:11:28 16:51:22+08:00
Create Date                     : 2013:11:28 16:51:22+08:00
Format                          : application/pdf
Title                           : Microsoft Word - quick guide B3 Certification 20131028.docx
Creator                         : Administrator
Document ID                     : uuid:453ca90b-2281-4e0d-98f4-0330ef347f01
Instance ID                     : uuid:cbe00044-1fae-46b0-9783-c307fb1fc8f7
Page Count                      : 4
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZRQ-B3

Navigation menu