Penclic N3O N3 Office User Manual

Penclic AB N3 Office

User manual

N3 Office Manual EN Welcome to the quick guide. Penclic NumpadN3 Office combines ergonomically sound design with modern keyboard technology to bring you comfort and efficiency. Penclic Mini Keyboard setup Connect the USB antenna to the USB port. Driver installation starts automatically. Switch on the power on the back side of the keyboard How to use your Penclic Mini Keyboard Penclic Numpad N3Office LED indicates Num Lock status. Blue text indicates fuction while Num Lock is off Tap Num Lock key twice to start the calculator (windows system only) Troubleshooting • Make sure the Penclic Numpad USB connector is firmly attached to the computer’s USB port. • Connect to another USB port. • Connect to another computer. Technical specifications • The supported platforms for Penclic Mini Keyboard are all operating systems that support HID 1.1. These include Windows XP or later, Mac OSX version 10.1 or later and Linux/BSD. No extra software/driver installation is needed.
• USB Connection.Measurements • Height: 6 mm (21 mm at top),Base: 140 x 88 mm. • Weight: 233g including 1.2m cable.Technical support Should you require additional technical support with your Penclic®, please use our Web site (www.penclic.se) for further information or contact our support group through e-mail. Call Technical Support during business hours, Central European time (CET). Contact + 46 70 580 2140 contact@penclic.se FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu