Penclic R3 PENCLIC WIRELESS MOUSE User Manual QG wireless

Download:
Mirror Download [FCC.gov]
Document ID	1702474
Application ID	gXRLcdmuyGDgxZkdz3Ylyw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.11kB (276429 bits)
Date Submitted	2012-05-21 00:00:00
Date Available	2012-05-21 00:00:00
Creation Date	2012-05-21 15:10:29
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-05-21 15:12:27
Document Title	Microsoft Word - QG-wireless.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Technical info non print.
Client:
Technical info:
Penclic
dyecut marks found in cyan
layer.
corners must match those
found in QG-wirelss-cover.pdf
Bind: stapled
Item:
quickguide wireless
Product name:
Penclic Mouse R2/D2
fi lnamn:
QG-wireless.pdf
approved by:
date:
Printing:
70g writing paper
Colours
pantone warm red C
Contact:
Planeta Design
grev magnigatan 6, 3tr
Contact person:
Sandra planeta
tel:
0046 (0)8 666 00 52
email: sandra@planetadesign.se
100%black
= dicect (do not print)
qg-wl-notes.indd 1
2011-06-27 21.27
Penclic Mouse R2™ Quickguide
EN
Quickguide
EN
Welcome to the quick guide.
Penclic Mouse™ combines ergonomically
sound design with modern mouse technology
to bring you unparalleled precision,
comfort and effi ciency.
Mouse setup
Remove plastic fi lm from the installed battery., then set
the mouse power
switch on the bottom of the mouse to ON. The wireless
connection activates automatically.
How to use your Penclic Mouse™
1. Hold Penclic Mouse™ like a pen, the bottom part acts
Left click
Right click
Middle click
Backward click
Forward click
Scroll wheel
On-off switch
Troubleshooting
www.Penclic.se/troubleshooting
· Connect to another computer.
· Cursor movement may be effected by very
glossy surfaces.
like a traditional mouse.
· Check the battery.
2. Let your forearm and your hand rest on a surface,
while keeping your shoulders relaxed.
·
3. The pen par can be adjusted to suit specifi c grips.
Fixate the bottom part with one hand and rotate the pen to
the preferred angle with the other.
· When the battery needs charging the LED on the mouse
will show red. When the battery is fully charged a green
light will be displayed.
QG-Wireless.indd 2-3
2011-06-27 21.27
Technical specifi cations
The supported platforms for Penclic Mouse™
Technical support
are all
operating systems that support HID 1.1. These include
Windows XP or later, Mac OSX version 10.1 or later
and most Linux/BSD fl avors. No extra software/driver
installation is needed.
· Operates on almost any surface without any
pad or tablet.
· Implements a 5-button and scroll wheel.
·
NOTE: the dpi setting can be changed by holding in the
Should you require additional technical support with
left and right button at the same time for 3 sec, the
cursor will move faster for each setting. It will rotate
around from 800-2400 and then go back to low 800.
Once the power is shut of the dpi setting will return to
its default setting, 1200 dpi.
your Penclic Mouse™ , please use our Web site for further
information or contact our support group through e-mail.
· Wireless reach, minimum 5 metres.
Measurements:
Contact:
· Dpi setting 800-1200-1600-2400.
Height: 140 mm, Base: 44.1 x 20 mm.
Weight: 41 g
0046 8 544 98 995
email: contact@penclic.se
· Charging via USB.
· LR 03/AAA/1.5V Alkaline None rechargeable battery
can be used. NOTE: do not recharge.
· Energy saving mode starts after 10 min, press a
button to start.
Call Technical Support during business hours, central
European time plus one hour.
· AAA 1.2V NiMH Recharging battery (Everyday use last
approximately 3 months before charging is needed).
QG-Wireless.indd 4-5
QG-Wireless.indd 50-5
2011-06-27 21.27
2011-06-27 21.27
PenClic Technology AB
Vendevägen. 90 / 182 32 DANDERYD
contact@penclic.se / www.penclic.se
tel: 0046 8 544 98 995
QG-Wireless.indd 54
2011-06-27 21.27
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC WARNING
This device complies with Industry Canada RSS-210 standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of PCB
and maximum 0dBi gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (IC:9999A-R2) has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
No.
Antenna Type
Gain
Impedance
PCB
0 dBi
50ohm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:05:21 15:12:27+08:00
Create Date                     : 2012:05:21 15:10:29+08:00
Metadata Date                   : 2012:05:21 15:12:27+08:00
Format                          : application/pdf
Title                           : Microsoft Word - QG-wireless.doc
Creator                         : Administrator
Document ID                     : uuid:c78becaa-8c30-4bcd-a3aa-93685bcec8a2
Instance ID                     : uuid:d88e0433-6a8a-4f47-b046-74251d219167
Has XFA                         : No
Page Count                      : 6
Author                          : Administrator

EXIF Metadata provided by EXIF.tools