Pentax Optio 430Rs Users Manual E01KB335_33e.qk

430RS to the manual acb3cd1b-3aef-4461-9291-658960db611c

2015-02-02

: Pentax Pentax-Optio-430Rs-Users-Manual-441901 pentax-optio-430rs-users-manual-441901 pentax pdf

Open the PDF directly: View PDF .
Page Count: 70

Digital Camera

Operating Manual

To ensure the best performance

from your camera, please read

the Operating Manual before

using the camera.

e01KB335_33e.qk 6/6/02 4:30 PM Page 1 (1,1)

Thank you for buying the Pentax Digital Camera. Please read this

manual before using the camera in order to get the most out of

all the features and functions. Keep this manual safe, as it can be

a valuable tool in helping you to understand the camera’s capa-

bilities.

Regarding copyrights

Images taken using the Optio 430RS/330RS that are for anything other

than personal enjoyment cannot be used without permission according to

the rights as specified in the Copyright Act. Please take care, as there are

even cases where limitations are placed on taking pictures even for per-

sonal enjoyment during demonstrations, industrial enterprise or as items

for display. Images taken with the purpose of obtaining copyrights also

cannot be used outside the scope of use of the copyright as laid out in the

Regarding trademarks

• CompactFlash and CF are trademarks of SanDisk Corporation.

• PENTAX is a trademark of Asahi Optical Co., Ltd.

• Optio is a trademark of Asahi Optical Co., Ltd.

• All other brands or product names are trademarks or registered trade-

marks of their respective companies.

• The USB driver uses software developed by inSilicon Corporation.

• This product supports PRINT Image Matching II. When used in combina-

tion, PRINT Image Matching II enabled printers and software, help pho-

tographers to produce images more faithful to their intentions.

PRINT Image Matching is a trademark of Seiko Epson Corporation.

This manual is common to Optio 430RS and Optio 330RS. In this

manual the features specific to Optio 430RS and Opio 330RS are

indicated as “430RS” and “330RS” respectively.

The illustrations and the display screen of the LCD monitor in this manual

may be different from the actual product.

To customers who already have Optio 430/330

Please read page 87 before connecting the Optio 430RS/330RS to

your PC.

FOR SAFE USE OF YOUR CAMERA

Sufficient attention has been paid to the safety of this product but please

pay particular attention to the warnings indicated by the following symbols

during use.

Warning These symbols indicate that it is possible that the

user may experience serious difficulties if the warn-

ings are not heeded.

Caution These symbols indicate that it is possible that the

user may experience minor or middling difficulties or

physical difficulties if the warnings are not heeded.

Warning:

• Do not attempt to take the camera apart or remodel the camera. High voltages are

present within the camera, and there is therefore a danger of electric shocks.

• If the inside of the camera should become exposed as a result of, for example, the

camera being dropped, please do not under any circumstances touch such exposed

portions, as there is a danger of receiving an electric shock.

• Wrapping the strap of the camera around your neck is also dangerous, please take

care that small children do not hang the strap around their necks.

• Use an AC adapter that are of the power and voltage specified for exclusive use with

this product. The use of an AC adapter other than that specified exclusively for use

with this product may cause fire or electric shocks.

• If the camera emits smoke or a strange smell, or in the event of any other irregularity,

stop using the camera immediately, remove the battery or disconnect the AC adapter

and contact your nearest Pentax service center. Continued use of the camera may

result in fire or electric shock.

• Discontinue use of the AC adapter during thunderstorms. This can cause a fire or

electrical shock.

Caution:

• Never try to disassemble, short or recharge the battery. Also, do not dispose of the

battery in fire, as it may explode.

• Remove the battery from the camera immediately if it becomes hot or begin to

smoke. Be careful not to burn yourself during removal.

• Some portions of the camera heat up during use, so please take care, as there is a

risk of low temperature burns if such portions are held for long periods of time.

• If the batteries become old and begin to leak, handle with extreme care.

• If any of the battery leakage should come in contact with your eyes, do not rub them.

Flush your eyes with clean water and get medical attention immediately.

• If any of the battery leakage should come in contact with skin or clothes, wash the

affected areas throughly with water.

e01KB335_33e.qk 6/6/02 4:30 PM Page 2 (1,1)

Contents

FOR SAFE USE OF YOUR CAMERA···········································1

Care to be Taken During Handling ················································2

Contents·························································································3

Contents of the Operating Manual·················································5

Checking the Contents of the Package ·········································6

Names of Parts··············································································7

Names of Operating Parts ·····························································8

Getting Started ·······························································································9

Attaching the Strap·················································································9

Powering the Camera···········································································10

Charging the Battery····································································10

Installing the Battery ····································································11

Using the AC Adapter (optional)··················································13

Installing or removing the CF Card ······················································14

Initial Settings·······················································································16

Setting the Display Language······················································16

Setting the Home Town································································17

Setting the D.S.T. Mode ·······························································17

Setting the Date and Time ···························································18

Quick Start ····································································································20

Taking Still Pictures ··············································································20

Playing Back Still Pictures····································································22

Playing Back Images ···································································22

Playing Back Previous or Next Images········································23

How to Use the CF Card······································································24

Common Operations ····················································································26

Turning the Camera On and Off···························································26

Changing the Mode··············································································27

Using the Button Functions··································································28

Capture Mode ··············································································28

Playback Mode ············································································29

Using the Menus ··················································································30

How to Use the Menus ································································30

Menu List ·····················································································32

Taking Pictures ·····························································································34

Displaying Shooting Information (Display Mode) ·································34

Taking Pictures ·····················································································35

Taking Still Pictures in Auto Mode (Auto Mode) ··························35

Taking Pictures Manually (Manual Exposure Mode) ···················36

Taking Dark Scenes (Night-Scene Mode) ···································38

Continuous Shooting ···································································39

Using the Remote Control Unit (optional)····································40

Taking Movie Pictures (Movie Picture Mode) ······························42

Using the Zoom ···········································································44

Using the Self-Timer ····································································46

Taking Stereo Pictures (3D Image Mode) ···································47

Taking Pictures with Digital Filters (Digital Filter Mode) ··············52

Taking Pictures at a Specified Interval (Interval Shooting)··········54

Shooting Time-lapse Movies (Time-lapse Movie)························56

Setting the Shooting Functions ····························································57

Adjusting the Viewfinder ·····························································57

Selecting a Focus Mode ······························································58

EV Compensation········································································61

Changing the Shutter Speed/Aperture Setting ····························61

Selecting the Flash Mode ····························································62

Selecting the Recorded Pixels·····················································63

Selecting the Quality Levels ························································64

Care to be Taken During Handling

• Do not clean the product with organic solvents such as thinner or alcohol benzene.

• Places of high temperature and humidity should be avoided. Particular care should

be taken regarding vehicles, which can become very hot inside.

• Storing the camera where pesticides and chemicals are handled should be avoided.

Remove from case and store in a well-ventilated place to prevent the camera from

becoming moldy during storage.

• Do not use the camera where it may come in contact with rain, water or any other liq-

uid, because the camera is not weather, water, or liquid resistant. Should the camera

get wet from rain, splashing water, or any other liquid, wipe it off immediately with a

dry soft cloth.

• Ensure that the camera is not subjected to substantial vibrations, shocks or pressure.

Place the camera on a cushion for protection when the camera is subjected to the

vibrations of a motorbike, car, or ship, etc.

• The liquid crystal display will become black at temperatures of approximately 60°C

(140°F) but will return to normal when normal temperatures are returned to.

• The response speed of the liquid crystal display becomes slow at low temperatures.

This is due to the properties of the liquid crystal and is not a fault.

•

Remove dust from the lens and viewfinder using a blower or clean off dust using a lens brush.

•

Periodic checks are recommended every 1 to 2 years in order to maintain high-performance.

• When the camera has not been used for a long time, confirm that it is still working

properly, particularly prior to taking important pictures (such as at a wedding or dur-

ing travelling). Pentax is not responsible for consequential damages (costs incurred

as a result of taking pictures, loss of benefits that were to be obtained through taking

pictures) arising from failure of this product.

• If the camera is subjected to rapid temperature changes, condensation may form on

the inside and outside of the camera. Therefore put the camera in a bag or plastic

bag, and take the camera out when the difference in temperature has subsided.

• The temperature range in which the camera can be used is 0°C to 40°C (32°F to

104°F).

• Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may

cause damage to the camera. If rain or drops of water get onto the camera, please

wipe dry.

• Please refer to “Precautions When Using a CF Card” (p.15) regarding the

CompactFlash (CF) card.

• Be sure to use the D-LI2 rechargeable lithium ion battery provided for this camera. If

you use any other battery the camera may be damaged or malfunction.

To users of this camera

• There is a possibility that recorded data may be erased or that the camera may not

function correctly when used in surroundings such as installations generating strong

electromagnetic radiation or magnetic fields.

• The liquid crystal panel used in the LCD display is manufactured using extremely

high precision technology. Although the level of functioning pixels is 99.99% or bet-

ter, you should be aware that 0.01% or fewer of the pixels may not illuminate or may

illuminate when they should not. However, this has no effect on the recorded image.

e01KB335_33e.qk 6/6/02 4:30 PM Page 2 (1,1)

Contents of the Operating Manual

This Operating manual contains the following chapters.

●Getting Started

This chapter explains what you need to do after purchasing the camera and

before you start taking pictures. Be sure to read it and follow the instructions.

●Quick Start

This chapter explains the simplest way to take pictures and play back images.

Use it if you want to start taking pictures straightaway. It also tells you how to

use the CF card.

●Common Operations

This chapter explains common operations such as the functions of the mode

dial and buttons, and how to use the menus. For more details, refer to the

respective [Taking Pictures], [Playback/Erasing] and [Editing Images/Settings]

chapters.

●Taking Pictures

This chapter explains the various ways of capturing images and

how to set the relevant functions.

●Playback/Erasing

This chapter explains how to play back images and how to delete

images.

●Editing Images/Settings

This chapter explains how to edit captured images and how to set

the camera-related functions.

●Appendix

This tells you about the messages displayed on the LCD monitor

and what to do in the event of trouble.

The meanings of the symbols used in this Operating manual are

explained below.

indicates the reference page number for an explanation of the

related operation.

indicates information that is useful to know.

indicates precautions to be taken when operating the camera.

Caution

memo

Adjusting the Color Balance according to Lighting (White Balance)

······65

Changing the AF Area (Focusing Area) ······································67

Setting the Light Metering Range to Determine the Exposure (AE Metering)

····68

Setting the ISO Speed (ISO Speed)············································69

Setting the Instant Review Time (Instant Review) ·······················70

Setting the Image Sharpness (Sharpness) ·································71

Setting the Color Saturation (Saturation)·····································72

Setting the Image Contrast (Contrast)·········································73

Saving the Settings (Memory)······························································74

Saving the Menu Items (Mode Memory) ·····································74

Playback/Erasing ··························································································76

Playing Back Images············································································76

Playing Back Still Pictures ···························································76

Zoom Display···············································································76

Playing Back Movie Pictures ·······················································78

Displaying Shooting Information (Display Mode)·························79

Nine-image Display······································································80

Erasing Images ····················································································81

Erasing a Single Image ·······························································81

Erasing All Images·······································································82

Protecting Images from Deletion (Protect) ··································83

Setting the Printing Service··································································84

Printing Single Image ··································································84

Printing All Images·······································································86

Viewing Images with Windows PC·······················································87

About the included software ························································87

System environment ····································································87

Installing the software··································································88

Connecting the camera and PC ··················································98

Viewing images on your PC ························································99

Disconnecting the camera from your PC···································100

Viewing Images with Macintosh·························································102

About the included software ······················································102

System environment ··································································102

Installing the software································································103

Connecting the camera and your Macintosh·····························104

Viewing images on your Macintosh···········································105

Disconnecting the camera from your Macintosh ·······················105

Editing Images/Settings·············································································106

Editing Images····················································································106

Copying the Image·····································································106

Trimming Images ·······································································108

Changing the Image Size (Resize)············································110

Camera Settings·················································································112

Formatting··················································································112

Sounding the Alarm at a Set Time ············································113

Setting the Beep ········································································115

Changing the Start-up Screen ···················································116

Setting the Date Style································································117

Changing the Date/Time····························································117

Setting the World Time ······························································118

Changing the Display Language················································119

Powersaving Function (Sleep Timeout) ·····································120

Auto Power Off Function····························································120

Quick Delete ··············································································121

Quick Enlargement ····································································121

Resetting to Default Settings (Reset) ········································122

Appendix ·····································································································124

List of City Names··············································································124

Messages ···························································································125

Troubleshooting ··················································································127

Main Specifications ············································································130

Optional Accessories ·········································································132

WARRANTY POLICY·········································································133

e01KB335_33e.qk 6/6/02 4:30 PM Page 4 (1,1)

Checking the Contents of the Package

Digital Camera

Operating Manual

To ensure the best performance

from your camera, please read

the Operating Manual before

using the camera.

Strap

O-ST5

Names of Parts

Front

Back

Camera

Optio 430RS

Optio 330RS

Battery charger

D-BC2

Software (CD-ROM)

S-SW5

3D Image Viewer

O-3DV1

USB cable I-USB6

Shutter release button

USB terminal

DC input terminal

Lens

Viewfinder

LCD monitor

Tripod socket

Battery chamber cover

Strap lug

CF card cover

Rechargeable lithium-ion

battery D-LI2

Power switch

Viewfinder

Self-timer lamp/AF spot-

beam

Built-in flash

Terminal cover

(Rotate and open this

cover to use the USB or

DC input terminal.)

AC plug cord D-CO2✽

✽Type of AC plug cord

D-CO2A Australia / D-CO2B United Kingdom / D-CO2E Europe / D-CO2H Hong

Kong / D-CO2J Japan / D-CO2K Korea / D-CO2U North America, Canada

Flash light sensor

Remote control receiver

Operating Manual

this manual

e01KB335_33e.qk 6/6/02 4:30 PM Page 6 (1,1)

Names of Operating Parts

●Guide indications

A guide to available button operation is displayed on the LCD monitor during

operation. The buttons are indicated as shown below.

Four-way controller ( ) Zoom button

Four-way controller ( ) Display button

Four-way controller ( ) DPOF button

Four-way controller ( ) button

Menu button button

Playback/OK button Shutter release button

8 9

Getting Started

Attaching the Strap

Pass the narrow end of the strap through the strap lug and pass

the other end through the loop.

/ button

/DPOF button

Display button

Status lamp

Flash lamp

Playback/OK button

Menu button

Zoom/ button

Mode dial

Shutter release button

Power switch

Four-way controller

()

/ button

Diopter adjustment lever

e01KB335_33e.qk 6/6/02 4:30 PM Page 8 (1,1)

Powering the Camera

Charging the Battery

When using the camera for the first time or when the [Battery

depleted.] message is displayed, charge the battery.

zConnect the AC plug cord to the battery charger.

xPlug the AC plug cord into the power outlet.

Place the battery in the charger with the label facing down.

The charging indicator lights red while the battery is charging

and changes to green when charging is completed.

vWhen charging is completed, remove the battery from the

battery charger.

• The time required for full charge is about 120 minutes maxi-

mum.

The appropriate ambient temperature range for charging the

battery is 0°C-40°C.

• The charging time may vary depending on the ambient temper-

ature and charging conditions.

• When the battery reaches the end of its service life, the time

that the camera can be operated becomes shorter even when

the battery is fully charged. In this event, replace the battery.

• Always charge the battery after purchasing or when it has

not been used for a long time.

• Do not use the charger to charge batteries other than the

D-LI2 rechargeable lithium ion battery as the charger may

overheat or be damaged.

•

If the battery is inserted correctly but the charging indicator fails

to light, the battery may be faulty. Replace with a new battery.

Caution

memo

Getting Started

Installing the Battery

Install the battery provided. When using the camera for the first

time, charge the battery before installing.

zSlide the battery chamber cover release lever in the

direction indicated by the arrow to open the battery

chamber cover.

xInsert the battery with the label towards back of camera .

cClose the battery chamber cover.

If you intend to use the camera continuously for a long period, use

of the AC adapter D-AC2 (optional) is recommended. ( p.13)

• Be sure to use the D-LI2 rechargeable lithium ion battery

provided for this camera. If you use any other battery the

camera may be damaged or malfunction.

• Do not open the battery chamber cover or remove the bat-

tery when the camera is turned on.

• If you do not intend to use the camera for a long time,

remove the battery.

• If the camera is left without the battery for a long time, the

date setting will be reset.

• Insert the battery correctly. If the battery is incorrectly ori-

ented, it may cause malfunction.

Caution

memo

Charging

indicator

Battery

charger

AC plug cord

Battery chamber

cover

Battery chamber

cover release

lever

Battery

cTo power outlet

e01KB335_33e.qk 6/6/02 4:30 PM Page 10 (1,1)

Using the AC Adapter (optional)

If you intend to use the LCD monitor for a long time or connect the

camera to a PC, use of the AC adapter D-AC2 (optional) is recom-

mended.

zMake sure that the camera is turned off before opening

the terminal cover.

xConnect the DC terminal on the AC adapter to the DC

input terminal on the camera.

cConnect the AC plug cord to the AC adapter.

vPlug the AC plug cord into the power outlet.

• Make sure that the camera is turned off before connecting

or disconnecting the AC adapter.

• Make sure that the AC plug cord and connecting cord are

inserted securely. If the cord becomes disconnected while

you are taking pictures, the data may be lost.

• When using the AC adapter D-AC2, be sure to read the

operation manual accompanying the AC adapter.

Caution

Getting Started

●Approximate Operating Time (when fully charged)

Number of recordable images: Approx. 250 (with the flash fired for

50% of the shots. LCD monitor ON)

Playback time : Approx. 150 min.

* The above table is based on Pentax measuring conditions and may vary

depending on capture mode and shooting conditions.

Performance of the battery may deteriorate in low tempera-

tures.

●Battery Level Indicator

You can check the battery level by the symbol displayed on

the LCD monitor.

(lit green) : Adequate power remains.

↓

(lit green) : Battery is running low.

↓

(lit yellow) : Battery is running very low.

↓

(lit red) : Battery is exhausted.

↓

[Battery depleted.] : After the message is displayed,

the camera will turn off.

Caution

zTerminal cover AC adapter To Power outlet

e01KB335_33e.qk 6/6/02 4:30 PM Page 12 (1,1)

Getting Started

Precautions When Using a CF Card

• Make sure that the camera is turned off before opening the CF card cover.

• Care should be taken if you remove the CF card immediately after using the

camera, as the card may be hot.

• Do not open the CF card cover or turn the camera off while data is being

recorded on the card or transferred to another device as this may cause the

data to be lost or the card to be damaged.

• Do not bend the CF card or subject it to violent impact. Keep it away from water

and store away from high temperature.

•

Be sure to format unused CF cards or CF cards that have been used on another

camera. Refer to “Formatting” (p.112) for instructions on formatting.

• Never open the CF card cover during formatting as this may cause the card to

be damaged and become unusable.

• Data recorded on a CF card with the Optio 430RS/330RS cannot be played back

accurately on the Optio 430/330/230. Similarly, data recorded with the Optio 230

cannot be played back accurately on the Optio 430RS/330RS.

• The data on the CF card may be erased in the following circumstances. Pentax

does not accept any liability for data that is erased

• when the CF card is mishandled by the user.

• when the CF card is exposed to static electricity or electrical interference.

• when the card has not been used for a long time.

• when the card is ejected, the AC adapter is disconnected or the battery is

removed while the data on the card is being accessed (when the status lamp

and flash lamp are blinking green and red).

• The CF card has a limited service life. If it is not used for a long time, the data

on the card may become unreadable. Be sure to make a backup of important

data on a PC.

• Avoid using or storing the card where it may be exposed to static electricity or

electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed to

rapid changes in temperature or to condensation.

Installing or removing the CF Card

Captured images are recorded on the CompactFlash (CF) card.

Make sure that the camera is turned off before inserting or remov-

ing the CF card (optional). When no card is inserted, the images

are recorded in the camera’s built-in memory (11MB).

Installing the Card

zOpen the CF card cover.

xOrient the card with the surface of the card having the

symbol facing towards the lens and with the

pin-connector edge of the card towards the slot and

insert fully.

cClose the CF card cover.

Removing the Card

zOpen the CF card cover.

xPress the CF card eject button and remove the card.

cClose the CF card cover.

• If you open the CF card cover when the camera is turned

on, a warning beep will sound and the camera will turn off

automatically.

• If you open the CF card cover while recording an image on

the CF card, the recording operation will be terminated (the

image will not be saved).

Caution

CF card cover

CF card

CF card eject button

e01KB335_33e.qk 6/6/02 4:30 PM Page 14 (1,1)

Getting Started

Setting the Home Town

You can choose the city (Home Town) in

which you will use the camera.

zPress the four-way controller

( ) to select the desired city

(Home Town).

xPress the four-way controller ( ).

The screen for setting the next item will be displayed.

• See p.124 for the list of cities and corresponding code names.

• You can change the setting after it has been made. Refer to

“Setting the World Time” (p.118).

Setting the D.S.T. Mode

You can choose whether or not to display the D.S.T (Daylight

Saving Time) mode.

zUse the four-way controller ( )

to select (On) or (Off).

The default setting is (Off).

xPress the four-way controller ( ).

The screen for setting the next item

will be displayed.

You can change the setting after it has been made. Refer to

“Setting the World Time” (p.118).

memo

MENU OK

Exit Ok

Initial setting

Language/

English

DST

City

NYC

MENU OK

Exit Ok

Initial setting

Language/

English

DST

City

NYC

Initial Settings

If the initial settings screen appears when you turn the camera on,

follow the procedure below to set the display language, Home

Town, DST, and current date and time. If the date and time appear

at the bottom right of the LCD monitor when you turn the camera

on for the first time, follow the instructions for “Changing the

Date/Time” (p.117) to set the correct date and time.

Setting the Display Language

You can choose the language in which the menus, error mes-

sages, etc. are displayed from the following: English, French,

German, Spanish, Italian and Japanese.

zTurn the camera on.

xUse the four-way controller ( )

to select the display language.

The default setting is English.

cPress the four-way controller ( ).

The screen for setting the next item

will be displayed.

You can change the setting after it has been made. Refer to

“Changing the Display Language” (p.119).

memo

Display button

Menu button

Power switch

Playback/OK button

Four-way controller

MENU OK

Exit Ok

Initial setting

Language/

English

DST

City

NYC

e01KB335_33e.qk 6/6/02 4:30 PM Page 16 (1,1)

Setting the Date and Time

Set the current date and time.

zUse the four-way controller ( )

to change the month.

xPress the four-way controller ( ).

and will be displayed

above and below the day.

cUse the four-way controller ( )

to change the day and press the

four-way controller ( ).

and will be displayed

above and below the year.

vRepeat Step cto change the

[year] [hour] and [minutes].

bUse the Display button to select the 12-hour or 24-hour

display format.

MENU OK

Exit

Date Adjust

6 / 10 / 2002

00 : 00

12/24

DISP

Getting Started

nWhen you have finished the settings, press the

Playback/OK button when the clock reaches 00 seconds.

The screen confirming the settings will be displayed and the

camera is ready to take a picture.

• When the initial settings screen is displayed, you can cancel the

setting operation and switch to Capture mode by pressing the

MENU button. If this is done, the initial settings screen will be

displayed next time you turn the camera on.

• You can change the settings after they have been made. Refer

to “Changing the Date/Time” (p.117).

memo

MENU OK

Exit

Date Adjust

6 / 1 / 2002

00 : 00

12/24

DISP

MENU OK

Exit

Date Adjust

1 / 1 / 2002

00 : 00

12/24

DISP

MENU OK

Exit

Date Adjust

6 / 10 / 2002

10 : 30

12/24

DISP

e01KB335_33e.qk 6/6/02 4:30 PM Page 18 (1,1)

vPress the shutter release button.

The image will be displayed on the LCD monitor for 0.5

seconds (Instant Review) and recorded on the CF card or

in the built-in memory when no card is inserted. (The

green and red lamps on the right of the viewfinder blink

alternately while the image is being recorded.)

Using the Shutter Release Button

The shutter release button works in a two-step action.

●Press halfway

When the shutter release button is pressed lightly (halfway),

the focus, exposure and white balance are locked. The shut-

ter speed and aperture settings are only displayed when the

shutter release button is pressed lightly (halfway).

You can find the following information on the LCD monitor,

the status lamp and the flash lamp.

qFocusing area

If the subject is in focus, the frame will light green. If the

subject is not in focus, the frame will not appear.

wFlash symbol

The flash symbol indicates the status of the flash when the

shutter release button is pressed.

Status lamp & Flash lamp (on the right of the viewfinder)

status Status lamp (green) Flash lamp (red)

lit Subject is in focus Flash is charged

blink Subject is not in focus Flash is charging

●Pressed down fully

The picture is taken.

Instant Review

The Instant Review default setting is 0.5 seconds. During this

time you can delete the image by pressing the button (The

Delete screen will be displayed.), and selecting [Delete].

Setting the Instant Review Time p.70

Quick Start

Taking Still Pictures

For the simplest procedure to take still pictures:

The flash fires automatically depending on the light conditions.

zPress the power switch.

The camera will turn on.

xSet the mode dial to .

cTurn the LCD monitor on.

Press the Display button to dis-

play the shooting screen on the

LCD monitor.

The focus frame in the middle of

the LCD monitor indicates the

zone of automatic focusing. You

can change the size of the sub-

ject by pressing the Zoom but-

ton.

makes the subject bigger.

makes the subject smaller.

You can check the size of the

subject by looking through the

viewfinder.

Changing the focus range and position p.58

Stopping the flash firing automatically p.62

Displaying shooting information p.34

200200

11:19 11:19

6/10/20026/10/2002

Focus frame

LCD monitor

Viewfinder

Zoom button

Mode dial

Shutter release button

Power switch

Focus frame

e02KB335_33e.qk 6/6/02 4:28 PM Page 20 (1,1)

Playing Back Still Pictures

Playing Back Images

You can display the still picture.

zPress the Playback/OK button

after taking a picture.

The image taken will be dis-

played on the LCD monitor.

During this time you can erase

the image by pressing the

button (The Delete screen will

be displayed.), selecting

[Delete], and then pressing the

Playback/OK button.

Press the Playback/OK button

again or press the shutter

release button halfway to return

to shooting status.

• You can enlarge the image displayed on the LCD monitor by

pressing the zoom button.

• When the screen is changed to the playback screen, the

image with the largest file number will be displayed first.

Playing Back Still Pictures p.76

memo

Quick Start

Playing Back Previous or Next Images

Still images can be played back one at a time, proceeding

either forward or backward.

zPress the Playback/OK button after taking a picture.

An image will be displayed on the LCD monitor.

xPress the four-way controller ( ).

displays the previous image.

displays the next image.

During this time you can erase the image by pressing the

button (The Delete screen will be displayed.), select-

ing [Delete], and then pressing the Playback/OK button.

Press the Playback/OK button again or press the shutter

release button halfway to return to shooting status.

•

In the case of movie pictures, the first frame will be displayed.

• If there are no images stored, the [No image] message will

be displayed.

memo

100-0020100-0020

Stop

Delete

MENU OK

ExitExitExit

All ImagesAll Images

OkOkOk

Playback/OK button

LCD monitor

Four-way controller

LCD monitor

File No.

e02KB335_33e.qk 6/6/02 4:28 PM Page 22 (1,1)

Quick Start

Viewing images on a PC

You only need to install the USB driver the first time. After that,

you can view recorded images and edit them on the PC just by

connecting the camera to the PC with the USB cable and

downloading the images. Or you can remove the CF card from

the camera and transfer the data to your PC using a card

reader. If you use a laptop computer, you can transfer the

image data by fitting the CF card into the card adapter and

inserting the card adapter into the card slot.

Viewing Images with Windows PC p.87

Viewing Images with Macintosh p.102

Printing images by a printing service

Prints of images recorded on the CF card can be ordered in

the same way as with conventional photographs by taking the

CF card to a store that performs printing.

The number of prints can be specified and dates can be includ-

ed in the prints if DPOF (Digital Print Order Format) is set before

taking the CF card to a store that performs DPOF printing.

Setting the Printing Service p.84

How to Use the CF Card

When the CF card is inserted into the camera, images taken

are recorded on the card. You can view the images recorded

on the card on the camera itself, transfer them to your PC and

print them out.

Viewing images on the camera

One of the advantages of a digital camera is that it enables

you to view your pictures immediately after you have taken

them. You can check the composition and brightness and take

the picture again if you are not satisfied.

Playing Back Still Pictures p.76

e02KB335_33e.qk 6/6/02 4:28 PM Page 24 (1,1)

Most of the settings are made

automatically by the camera when

a picture is taken.

This mode is for taking dark

scenes such as night views.

You can set the aperture and

shutter speed manually.

This mode is for taking moving

images.

This mode is for taking 3D

pictures.

Various color filters including red,

blue and green can be used for

taking pictures.

Auto mode

Night-scene mode

Manual exposure

mode

Movie picture mode

3D image mode

Digital filter mode

Common Operations

Turning the Camera On and Off

Use the power switch to turn the camera on and off.

zPress the power switch.

The camera will turn on.

When the camera is turned on, the lens cover opens and the

lens extends.

Press the power switch again to turn the camera off.

This mode is for playing back

recorded images.

Power switch

Changing the Mode

Capture mode is for taking pictures and Playback mode is for play-

ing back or erasing images. Press the Playback/OK button to

change the mode between Capture mode and Playback mode.

Pressing the Playback/OK button halfway during Playback mode

also moves the camera to Capture mode.

Capture Mode

p.20, 35

p.38

p.36

p.42

p.47

p.52

zTurn the mode dial so that the mark is on

or .

xPress the Playback/OK button or the shutter release but-

ton halfway in Playback mode.

Playback Mode

Playback/

Playback mode p.76

OK button

zPress the Playback/OK button in Capture mode.

e03KB335_33e.qk 6/6/02 4:38 PM Page 26 (1,1)

Common Operations

Playback Mode

qbutton

Deletes the image. ( p.81)

wDPOF button

Sets the print service. ( p.84)

ebutton

Protects the image from erasure. ( p.83)

rZoom button

Changes the size of the image displayed on the LCD monitor.

( p.76)

tbutton

Displays nine images at once. ( p.80)

yMenu button

Displays the active menus in Play mode. ( p.32, p.33)

uFour-way controller ( )

Displays images one by one. ( p.23)

iPlayback/OK button

Changes the mode from Playback to Capture, or selects the

menu item. ( p.27, p.30)

Ends zoom display or nine-image display. ( p.76, p.80)

oDisplay button

Changes the information displayed on the LCD monitor. (

p.79)

Using the Button Functions

Capture Mode

qDiopter adjustment lever

Adjusts the viewfinder for optimum clarity. ( p.57)

wbutton

Changes the flash mode. ( p.62)

ebutton

Changes the shooting mode as follows.

Using the Self-timer ( p.46), Using the Remote Control Unit (

p.40), Continuous Shooting ( p.39), Interval Shooting ( p.54)

* When the Capture mode is set on , Continuous

Shooting mode will be skipped.

rbutton

Changes the focus mode. ( p.58)

tZoom button

Changes the size of the subject. ( p.44)

yMenu button

Displays the active menus in Capture mode. ( p.32, p.33)

uFour-way controller ( )

Changes the EV compensation in mode. ( p.61),

Changes the shutter speed in mode. ( p.36), Changes the slim rate

in mode. ( p.52)

iFour-way controller ( )

Adjusts the focus in mode. ( p.59), Changes the aperture value in

mode. ( p.36), Selects the type of filter in mode ( p. 52).

oPlayback/OK button

Changes the mode from Capture to Playback, or selects the

menu item. ( p.27, p.30)

!0 Display button

Changes the information displayed on the LCD monitor. ( p.34)

qwer

u i

qwe

e03KB335_33e.qk 6/6/02 4:38 PM Page 28 (1,1)

Common Operations

Example of menu operation

zMenu button

[Rec.Mode] menu [Memory] menu [Set-up] menu

cv’

Select screen

To the next screen

If you press the shutter release button halfway to leave the menu

screen and move the camera to Capture mode, any changes to

the setting will not be saved.

memo

Using the Menus

When you press the Menu button, the menus are displayed on the LCD

monitor. You can set shooting functions, save the values set for shooting

when the power is off, and change the camera settings on these menus.

How to Use the Menus

When you are making settings from a menu, a guide to operation

is displayed on the LCD monitor.

zPress the Menu button.

The menu screen will be displayed. The selected area will be

displayed in a green frame.

xPress the four-way controller ( ).

Use the four-way controller ( ) to select the menu

screen.

cUse the four-way controller ( ) to select an item.

Use the four-way controller ( ) to move the frame up or

down.

vUse the four-way controller ( ) to change the setting.

v’If there is a Select screen, use the four-way controller

( ) to move to the Select screen.

When you have finished making the settings, press the

Playback/OK button to return to the menu.

bPress the Playback/OK button.

The settings will be saved and the screen will return to cap-

ture or playback status.

• If you press the Menu button and leave the menu screen,

any changes to setting will not be saved.

• Even if you press the Playback/OK button and leave the

menu screen, if you remove the battery before turning off

the camera or do not otherwise turn off the camera correct-

ly, any changes to setting will not be saved.

Caution

MENU OK

Memory

Flash

White Balance

EV Compensation

Exit

Digital Zoom

AE Metering

Rec.Mode

Set-up

(1/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

(1/3)

Recorded Pixels

AWB

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Off

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

hour(s)

00min

01min00sec

MENU OK

Exit

Interval Shooting

Interval

Number of shot

Start Time

MENU OK

Memory

AE Metering

ISO Speed

Instant Review

0.5sec

Auto

Off

Exit

Interval Shooting

Time-lapse Movie

Rec.Mode

Set-up

(2/3)

e03KB335_33e.qk 6/6/02 4:38 PM Page 30 (1,1)

Common Operations

Menu List

●[Rec.Mode] Menu

Item Description Default Setting

Reference

Recorded 2240 ×1680 (430RS) p.63

Pixels 2048 ×1536 (330RS)

Quality Level

p.64

White Balance

AWB p.65

Focusing Area

Multiple p.67

Digital Zoom On p.45

AE Metering p.68

ISO Speed Auto p.69

Instant Review

0.5sec p.70

Interval Off p.54

Shooting

Time-lapse Off p.56

Movie

Applied Parallel Mode p.47

Photo Mode

Sharpness Normal p.71

Saturation Normal p.72

Contrast Normal p.73

●[Memory] Menu

This menu is for selecting whether the settings are saved when

the camera is turned off.

Refer to p.74 for the items that can be set.

For selecting the size of

recorded pixels.

For selecting the image

compression rate.

For adjusting the color bal-

ance according to lighting.

For changing the Area of

the autofocus.

For taking digital zoom pictures.

For setting the metering method

to determine the exposure.

For setting the ISO speed.

For setting the instant review time.

For shooting at the speci-

fied interval of time.

For shooting at a delayed

frame rate (images are

played back in an effect of

fast forward).

For setting the applied

photo mode to take a 3D

picture.

For setting the sharpness.

For setting the saturation.

For setting the contrast.

Active Menus in Capture/Playback Mode

●[Set-up] Menu

Item Description Default Setting

Reference

Format p.112

Copy p.106

Image

Resize p.110

Trimming p.108

Alarm p.113

Beep p.115

Start-up p.116

Screen

Date Style p.117

Date Adjust p.117

World Time p.118

Language p.119

Sleep

p.120

Timeout

Auto Power p.120

Off

Quick Delete p.121

Quick p.121

Enlargement

Reset p.122

–

Off

Set according to the

Language default set-

ting

01/01/2002

Off

English

1min

3min

Off

–

For formatting the built-in

memory or CF card

For copying images from

the built-in memory to the

CF card and vice versa.

For changing the image size.

For trimming the image.

For sounding an alarm at a

specific time.

For adjusting the beep sound

when a button is pressed

For setting the screen

appearing first when the

power is turned on.

For setting the date style

For adjusting the date and

time

For setting the world time

For changing the language

in which menus and mes-

sages are displayed

For setting the power-sav-

ing function

For turning off the power

automatically.

When this option is turned

on, the Delete screen is

displayed with [Delete] or

[All Images] selected.

For playing back images at

the maximum zoom size

with the Zoom button

pressed only once.

For returning the camera

settings to defaults

e03KB335_33e.qk 6/6/02 4:38 PM Page 32 (1,1)

Taking Pictures

When the CF card is installed, all images will be recorded on the

CF card. When the CF card is not installed, the images will be

recorded in the camera’s built-in memory.

Taking Still Pictures in Auto Mode (Auto Mode)

By setting the mode dial to , most of the settings will be made

automatically by the camera when a picture is taken.

zSet the mode dial to in Capture mode.

xPress the shutter release button.

The picture will be taken.

Using the Shutter Release Button p.21

Taking Pictures

Displaying Shooting Information (Display Mode)

Display On

Shooting information is displayed.

qFlash mode wShooting mode

eFocus mode rCapture mode

tAF frame yRemaining images

uDate & time iBattery symbol

Histogram Display

The brightness distribution is dis-

played.

The x-axis shows the brightness (darkest at

the left end and brightest at the right end)

and the y-axis shows the pixel numbers.

qHistogram wRecorded pixels

eQuality level rWhite balance

tAE metering yISO speed

Display Off

No shooting information is displayed.

• Only the AF frame is displayed in auto

focus mode.

• If there is any change in the battery

level, the battery symbol is displayed.

• If any of the modes are changed such

as Flash mode, the mode you have

changed is displayed for a few sec-

onds.

LCD Monitor Off

The LCD monitor is turned off.

Saving the Display Mode p.74

When using the AC adapter, the battery level indicator is not dis-

played on the LCD monitor.

LCD Monitor Off cannot be set in Movie Picture, 3D Image

and Digital Filter modes.

When you turn off the LCD monitor, the digital zoom is turned

off even if it has been enabled.

Caution

memo

198198

11:19 11:19

6/10/20026/10/2002

46321

AWB

2048

198198

11:19 11:19

6/10/20026/10/2002

➞➞ ➞➞

Display On

e04KB335_33e.qk 6/6/02 4:38 PM Page 34 (1,1)

Taking Pictures

Taking Pictures Manually (Manual Exposure Mode)

You can set the shutter speed and aperture manually.

zSet the mode dial to in

Capture mode.

xUse the four-way controller to

change the shutter speed and

aperture.

Four-way controller ( ) :

Decrease the shutter speed

Four-way controller ( ) :

Increase the shutter speed

Four-way controller ( ) :

Decrease the aperture value

Four-way controller ( ) :

Increase the aperture value

If the combination of shutter speed and aperture do not give an

appropriate exposure, a warning will be displayed.

(lit) If the exposure difference from the appropriate exposure is

between -2.0EV and -0.3EV, will light, and if between

+0.3EV and +2.0EV, will light and the level will be

displayed.

(blinking) If the picture is underexposed, will blink, and if overex-

posed, will blink.

(blinking) If the exposure cannot be measured, will blink.

198

1/250

F2.6

198

1/250

F2.6 11:19 11:19

6/10/20026/10/2002

Aperture Shutter speed

cPress the shutter release button.

The picture will be taken at the set shutter speed and

aperture settings.

Playing Back Images p.76

The shutter speed and aperture settings will be saved when the

camera is turned off.

• Exposure compensation is not available in this mode.

• When the focus mode is set to manual, the four-way

controller ( ) becomes the manual focus button and

the aperture setting cannot be changed.

• You cannot select [Auto] or [Auto + Red-eye reduction]

flash mode.

Caution

memo

e04KB335_33e.qk 6/6/02 4:38 PM Page 36 (1,1)

Taking Pictures

Continuous Shooting

Pictures are taken continuously while the shutter release button is

pressed.

zSet the mode dial to or in Capture mode.

xPress the button to display

on the LCD monitor.

The mode will change to Continuous

Shooting mode.

cPress the shutter release button.

Pictures will be taken continuously while the shutter release

button is pressed. Shooting stops when you take a finger off

from the shutter release button.

Playing Back Images p.22

• You can continue shooting until the CF card or built-in memory

is full.

• The interval will vary according to the [Recorded Pixels] and

[Quality Level] setting.

• The flash will not fire in Continuous Shooting mode.

• Continuous shooting is not available for Movie Picture and

3D Image modes.

Caution

memo

z()

198198

11:19 11:19

6/10/20026/10/2002

Taking Pictures

Taking Dark Scenes (Night-Scene Mode)

The appropriate settings are made automatically for taking dark

scenes such as night views.

zSet the mode dial to in Capture mode.

xPress the shutter release button.

The picture will be taken.

Using the Shutter Release Button p.21

Playing Back Images p.22

As the shutter speed becomes slow in night-scene mode,

camera shake should be avoided.

Caution

e04KB335_33e.qk 6/6/02 4:38 PM Page 38 (1,1)

Taking Pictures

●Remote control unit battery service life

Up to approximately 30,000 signals can be sent to the camera

from the remote control unit. Contact your nearest Pentax service

center when battery replacement becomes necessary.

Zoom on the remote controller

The zoom can be changed using the

remote control E (optional).

If you press the Zoom button on the

remote control unit, the zoom will switch

from [Wide] to [Tele] to [Middle].

198198

[Wide] edge [Tele] edge

Using the Remote Control Unit (optional)

You can take pictures using the remote control F (optional).

Set the mode dial to or in Capture mode.

xPress the button to display

on the LCD monitor.

The self-timer lamp will blink and the

camera is ready to take pictures.

Press the shutter release button on

the remote control unit.

The self-timer lamp will blink rapidly and the picture will be

taken after approximately three seconds.

Playing Back Images p.76

• The buttons on the camera can be used in the same way.

• Please ensure that the remote control unit is no more than 5

meters away from the front of the camera.

• To take a picture immediately after pressing the shutter release

button on the remote control unit, press the button in step

xto display on the LCD monitor.

• When the digital zoom function is enabled, the digital zoom can

not be operated with the remote control unit, but the digital

zoom can be operated by pressing the Zoom button on the

camera. However, the camera will revert to optical zoom mode

by pressing the Zoom button on the remote control unit.

• The powersaving function can be operated (the self-timer lamp

will also go off).

memo

198198

11:19 11:19

6/10/20026/10/2002

z()

e04KB335_33e.qk 6/6/02 4:38 PM Page 40 (1,1)

Taking Pictures

Keeping the shutter release button pressed

If you keep the shutter release button pressed for more than one

second, pictures will be taken for as long as you keep the button

pressed. Shooting stops when you take a finger off from the shut-

ter release button.

Playing Back Movie Pictures p.78

• The flash will not fire in Movie Picture mode.

• Continuous shooting is not possible in Movie Picture mode.

• The LCD monitor cannot be turned off in Movie Picture

mode.

Caution

Taking Movie Pictures (Movie Picture Mode)

This mode enables you to take moving images with no sound. The

maximum length of one motion picture is 30 seconds.

zSet the mode dial to in Capture

mode.

The following information will be dis-

played on the LCD monitor.

qFlash Off

wMovie Picture mode

eRemaining shooting time

rRemaining number of sets

xPress the shutter release button.

Shooting will start.

You can change the size of the image using the zoom button.

makes the image bigger

makes the image smaller

cPress the shutter release button.

Shooting will end.

The remaining shooting time will be displayed.

11:19 11:19

•12SEC•12SEC

6/10/20026/10/2002

2 431

e04KB335_33e.qk 6/6/02 4:38 PM Page 42 (1,1)

Taking Pictures

Enabling/Disabling the Digital Zoom Function

zPress the Menu button.

The [Rec.Mode] menu will be displayed.

xPress the four-way controller ( )

to select [Digital Zoom].

cUse the four-way controller ( )

to select [On] or [Off].

vPress the Playback/OK button.

The camera is ready to take a pic-

ture.

When you turn off the LCD monitor, the digital zoom is

turned off even if it has been enabled.

Saving the Digital Zoom Function Setting p.74

Caution

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Off

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

Using the Zoom

You can use the zoom to take pictures in Tele or Wide mode.

zPress the Zoom button in Capture

mode.

makes the subject larger

makes the subject smaller

When the digital zoom function is

disabled, you can take pictures at

up to 3x magnification using the

optical zoom.

When the digital zoom is enabled,

you can enlarge the subject to a

maximum magnification equivalent

to 6x.

Saving the zoom position p.74

When you turn off the LCD monitor, the digital zoom is

turned off even if it has been enabled.

Caution

198198

Zoom bar

Digital zoom symbol

e04KB335_33e.qk 6/6/02 4:39 PM Page 44 (1,1)

Taking Pictures

Taking Stereo Pictures (3D Image Mode)

You can take 3D pictures using the LCD monitor and view them by

the parallel method or cross method (p.49). If you print out the 3D

pictures and look at them through the 3D image viewer provided,

the image will appear in three dimensions.

zSet the Mode dial to in Capture mode.

xPress the Menu button.

The [Rec. Mode] menu will be displayed.

cPress the four-way controller ( )

to select [Applied Photo Mode].

vUse the four-way controller ( )

to select [Parallel Mode] or [Cross

Mode].

To view the picture with the 3D

image viewer, select [Parallel Mode].

You can also view it without the

image viewer.

bPress the Playback/OK button.

The LCD monitor screen is divided in two. The left half screen

is for taking the first picture.

nTake the first picture while watch-

ing the capture guide.

Hold the camera so that the subject

is in the center of the left half

screen, and press the shutter

release button.

MENU OK

Memory

Applied Photo Mode

Sharpness

Parallel Mode

Saturation

Contrast

Exit Ok

Rec.Mode

Set-up

(3/3)

11:19 11:19

6/10/20026/10/2002

3131

Taking Pictures

Using the Self-Timer

The picture will be taken ten seconds after the shutter release but-

ton is pressed.

zSet the mode dial to or in Capture

mode.

xPress the button to display on the LCD monitor.

cPress the shutter release button.

The self-timer is started and the self-timer lamp lights. The

picture will be taken approximately three seconds after the

self-timer lamp starts to blink.

If you turn the LCD monitor on, the second count will be dis-

played.

Playing Back Images p.22

memo

z()

e04KB335_33e.qk 6/6/02 4:39 PM Page 46 (1,1)

Taking Pictures

●Viewing 3D pictures by the parallel method and cross

method

As our eyes are positioned about 6~7cm apart, there is a very

slight deviation between what we see with our right eye and what

we see with our left eye. The difference is processed by our brain

to produce a three-dimensional image. This principle is applied to

taking and viewing 3D pictures.

3D pictures can be viewed by the parallel method where the left

and right lines of vision are virtually parallel, as when looking at a

distant scene, or the cross method where the left and right lines of

vision are crossed, as when you cross your eyes. A certain

amount of practice may be necessary to view 3D pictures without

using the viewer.

●How to Assemble the 3D Image Viewer

Assemble the 3D image viewer supplied with the camera as

shown below.

The image of the first picture is dis-

played to the left half screen of the

LCD monitor, and the right half

screen is for taking the second pic-

ture.

mMove the camera to the right without changing your

stance.

,Take the second picture while watching the capture

guide.

Hold the camera so that the subject is in the center of the

right half screen, and press the shutter release button.

.Press the Playback/OK button.

The first and second images are

displayed to the left and right

screens respectively.

• To cancel the 3D Image mode, change the 3D Image mode to

another Capture mode.

• A clear three-dimensional effect will not be achieved if the two

images are taken in widely different positions (heights) or are

not straight. When taking a person, you are recommended to

ask your model to stay as still as possible and to take the sec-

ond picture as quickly as you can. It is easier to take the pic-

tures if you use a tripod or appropriate base.

• As a guide, the camera should be moved about 1/40 of the dis-

tance between the camera and the subject. For example, if the

subject is 3m away, the distance the camera should be moved

will be 3m ÷40=7.5cm.

However, as the way people see three-dimensional images dif-

fers from person to person, there is no need to be too con-

cerned. Refer to the table below for a simple guide to how far to

move the camera.

Distance to subject 0.1 m 0.3 m 0.5 m 1 m 3 m 5m

Camera movement 0.5 cm 1 cm 1.5 cm 2.5 cm 7.5 cm 13 cm

memo

3131

e04KB335_33e.qk 6/6/02 4:39 PM Page 48 (1,1)

Taking Pictures

●Example of a 3D picture●How to view 3D pictures using the 3D image viewer

Print out the pictures so that they are about 11cm or 12cm wide

and place the divider of the 3D image viewer in the middle of the

two.

Transfer the images with a PC or Macintosh p.87 or p.102

As the distance between the left and right eyes differs from person

to person, some people may have difficulty obtaining a three-

dimensional effect even when looking at prints that are the same

size. It may be especially difficult if the pictures are very large or

very small. Try different sizes until the right effect is achieved.

• Never look at the sun through the 3D image viewer.

• Do not leave the 3D image viewer where it is exposed to

direct sunlight as this may lead to fire.

Caution

memo

e04KB335_33e.qk 6/6/02 4:39 PM Page 50 (1,1)

Taking Pictures

When you selected a color filter:

cPress the shutter release button.

The picture will be taken.

When you selected the slim filter:

cUse the four-way controller ( )

to set the slim rate.

Four-way controller ( ) :

Elongates the subject vertically

Four-way controller ( ) :

Elongates the subject horizon-

tally

vPress the Playback/OK button.

bPress the shutter release button.

The picture will be taken.

• Digital Zoom cannot be used while the slim filter is selected.

• To change the slim rate, select another filter once, and then

select the slim filter again and set the slim rate.

• If you set a slim rate other than zero (0), only the picture zone

displayed on the LCD monitor is recorded as an image.

memo

OkOkOk

Taking Pictures with Digital Filters (Digital Filter Mode)

Digital filters include the color filters and a slim filter which elon-

gates the subject vertically or horizontally.

●Color filters

Eight colors, black and white, sepia, red, pink, violet, blue, green

and yellow, are provided for the color filters. When you select a

color filter in the Digital Filter mode, the display on the LCD moni-

tor is filtered with the selected color, and the pictures are taken in

that color.

●Slim filter

By selecting slim filter, subjects can be photographed elongated

vertically or horizontally in 8 steps.

zSet the Mode dial to in Capture mode.

xUse the four-way controller ( ) to select a digital fil-

ter you want to use.

c(Selecting a color filter)

c(Selecting a slim filter)

e04KB335_33e.qk 6/6/02 4:39 PM Page 52 (1,1)

Taking Pictures

mSet the start time.

1. Press the four-way controller ( ).

and will be displayed above and below the hour.

2. Use the four-way controller ( ) to set the hour

and press the four-way controller ( ).

and will be displayed above and below the minute.

3. Use the four-way controller ( ) to set the minute.

,Press the Playback/OK button twice.

.Press the button to display on the LCD monitor.

⁄0 Press the shutter release button.

The interval shooting starts.

• The shooting interval can be set by one second for an interval

between 30 seconds and 4 minutes, and by one minute for an

interval between 4 minutes and 99 minutes.

• The number of pictures can be set between 2 and 99.

• The shooting start time can be set by one minute between 0

and 3 hours 59 seconds.

• When “0” second is set for the shooting start time, the first pic-

ture is taken immediately after you press the shutter release

button.

• When the CF card or built-in memory space becomes insuffi-

cient, the interval shooting ends and the power of the camera is

turned off automatically.

memo

Taking Pictures at a Specified Interval (Interval Shooting)

Still pictures can be taken automatically at a specified interval.

zSet the Mode dial to or in Capture mode.

xPress the Menu button.

The [Rec. Mode] menu will be displayed.

cPress the four-way controller ( ) to select [Interval

shooting].

vPress the four-way controller ( ).

The [Interval Shooting] menu will be

displayed.

bSet the shooting interval.

1. Press the four-way controller

().

and will be displayed above and below the minute.

2. Use the four-way controller ( ) to set the minute

and press the four-way controller ( ).

and will be displayed above and below the second.

3. Use the four-way controller ( ) to set the second

and press the four-way controller ( ).

4. Press the four-way controller ( ).

The frame will move to [Number of shot]..

nUse the four-way controller ( ) to set the number of

shot and press the four-way controller ( ).

The frame will move to [Start Time].

Mode dial

Menu button

Shutter release

button

Four-way

controller

Playback/OK button

hour(s)

00min

01min00sec

MENU OK

Exit

Interval Shooting

Interval

Number of shot

Start Time

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

e04KB335_33e.qk 6/6/02 4:39 PM Page 54 (1,1)

Taking Pictures

Setting the Shooting Functions

Adjusting the Viewfinder

If the indicators in the viewfinder are hard to see, you can adjust

the diopter in the range of -3m-1+1m-1 (per meter).

zAim the camera towards the light

and move the diopter adjustment

lever to the left or right while look-

ing through the viewfinder.

Adjust the focus frame in the middle

of the viewfinder to the optimum

position. Focus frame

Viewfinder

Shooting Time-lapse Movies (Time-lapse Movie)

With the time-lapse movies, the frame rate (number of pictures

taken for one second) is slowed down. When you play back these

pictures, the subject appears to move much more quickly. This

effect may be useful for taking blooming flowers, for example.

zSet the mode dial to in Capture mode.

xPress the Menu button.

The [Rec. Mode] menu will be displayed.

cPress the four-way controller ( ) to select [Time-lapse

Movie].

vUse the four-way controller ( )

to select [Off (×1)], [×2], [×5], [×10],

[×20], [×50], or [×100].

bPress the Playback/OK button.

nPress the shutter release button.

The time-lapse movie shooting

starts.

[Off (×1)] is the typical movie setting (15 frames/second). As you

select [×2], [×5]..., the number of pictures taken for a second

decreases from 1/2, 1/5...

The images of movie pictures are always played back at the rate

of 15 frames per second. This means those taken at ×2 appear to

be played back twice faster and those at ×5 five times faster than

×1.

memo

Mode dial

Menu button

Shutter release

button

Four-way

controller

Playback/OK button

MENU OK

Memory

AE Metering

ISO Speed

Instant Review

0.5sec

Auto

×5

Exit

Interval Shooting

Time-lapse Movie

Rec.Mode

Set-up

(2/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

e04KB335_33e.qk 6/6/02 4:39 PM Page 56 (1,1)

Taking Pictures

If you take a picture while looking through the viewfinder when

the focus mode is set on Macro, the range of the resulting pic-

ture may differ from what was seen in the viewfinder.

Manual Focus

When the mode is set on , the center of the picture is enlarged

to full screen on the LCD monitor. Adjust the focus with the four-

way controller while looking at the image on the monitor.

increases the distance to the focusing position

decreases the distance to the focusing position

When you release the four-way controller, the focus position is set,

and the screen returns to the normal display two seconds later.

Saving the Manual Focus Position p.74

When it is difficult to obtain the correct focus in Manual Focus

mode for taking pictures in dark places, press the shutter release

button halfway in Auto mode, and the AF spotbeam will be emit-

ted, enabling the camera to focus more easily on the subject.

memo

Caution

Selecting a Focus Mode

●Focus Mode

None Auto

The camera is focused on the subject in the focusing

area when the shutter release button is pressed halfway.

Macro Mode This mode is used when the distance to the subject is

approx. 10cm-50cm (0.33ft-1.64ft). The camera is

focused on the subject in the focusing area when the

shutter release button is pressed halfway.

Infinity-landscape mode

This mode is used for taking distant objects.

Manual Focus Mode

The subject is brought into focus manually.

AF area move mode This mode is for changing the position of the autofocus

(AF) area.

zPress the button in Capture mode.

The focus mode changes each time the button is pressed and

the setting is displayed on the LCD monitor.

The camera is ready to take the picture in the set focus mode.

Saving the Focus Mode p.74

• When [Focus Mode] in the [Memory] menu (p.74) is not turned

on, the focus mode goes back to [Auto] when you turn off the

power.

• The default setting of the focus mode is [Auto]. When the focus

mode is [Auto], no icon is displayed on the LCD monitor.

memo

e04KB335_33e.qk 6/6/02 4:39 PM Page 58 (1,1)

Taking Pictures

EV Compensation

You can take pictures that are intentionally overexposed or under-

exposed.

zPress the four-way controller

( ) in Capture mode.

Four-way controller ( )

increases the EV compensa-

tion to a positive (+) level

Four-way controller ( )

decreases the EV compensa-

tion to a negative (–) level

The set level is displayed on the

LCD monitor.

• If you set to ± 0, the set level displayed on the LCD monitor will

go off after three seconds.

• When [EV Compensation] on the [Memory] menu (p.74) is not

turned on, the set value goes back to ±0 when you turn off the

power.

Saving the EV Compensation p.74

This function cannot be used in Manual Exposure mode.

Changing the Shutter Speed/Aperture Setting

See “Taking Pictures Manually (Manual Exposure Mode)” (p.36).

Caution

memo

EV compensation level

198198

11:19 11:19 –1.0–1.0

6/10/20026/10/2002

Setting the position of the autofocus (AF) area

When the mode is set on ,the position of the autofocus (AF)

area can be changed.

The AF area moves upward.

The AF area moves downward.

The AF area moves to the left.

The AF area moves to the right.

Press the Playback/OK button to determine the position of the AF

area.

When the mode is set on , the AF area is automatically set on

spot. In this case, the AF spotbeam will not be emitted.

Changing the AF Area (Focusing Area) p.67

memo

e04KB335_33e.qk 6/6/02 4:39 PM Page 60 (1,1)

Taking Pictures

Selecting the Recorded Pixels

You can choose the number of recorded pixels. These choices are

for Optio 430RS and Optio 330RS respectively.

Optio 430RS [2304 ×1712], [2240 ×1680], [1600 ×1200],

[1024 ×768], or [640 ×480]

Optio 330RS [2048 ×1536], [1600 ×1200], [1024 ×768],

or [640 ×480].

zSelect [Recorded Pixels] from the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the size.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

1600×1200

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Selecting the Flash Mode

None Auto

Flash Off

Flash On

Auto +

Red-eye

Reduction

Flash On +

Red-eye

Reduction

• The flash is off when the Capture mode is set to , continu-

ous shooting, or infinity-landscape mode.

• [Auto] and [Auto + Red-eye Reduction] modes cannot be select-

ed when the Capture mode is set to .

• In [Auto + Red-eye Reduction] and [Flash On + Red-eye

Reduction] modes, the flash discharges once to make subject’s

pupil smaller. The picture will then be taken in the flash mode

after a brief interval.

zPress the button in Capture mode.

The flash mode changes each time the button is pressed and

the set mode is displayed on the LCD monitor.

The flash lamp blinks red while the flash is charging. If the

flash lamp lights red when you press the shutter release but-

ton halfway after charging is completed, the camera is ready

to take the picture in the set flash mode.

Saving the Flash Mode p.74

memo

The flash discharges automatically depending on the

light conditions.

The flash will not discharge.

The flash discharges regardless of the brightness.

This mode reduces the phenomenon of red eyes

caused by the light from the flash being reflected in

the subject’s eyes. The flash discharges automatically.

This mode reduces the phenomenon of red eyes

caused by the light from the flash being reflected in

the subject’s eyes. The flash will discharge regardless

of lighting conditions.

e04KB335_33e.qk 6/6/02 4:39 PM Page 62 (1,1)

Taking Pictures

Adjusting the Color Balance according to Lighting (White Balance)

You can take pictures in natural colors by adjusting the white bal-

ance according to the light conditions at the time of shooting.

AWB

Auto The camera adjusts the white balance

automatically.

Daylight Use this mode when taking pictures outside in

sunlight.

Shade Use this mode when taking pictures outside in

the shade.

Tungsten Use this mode when taking pictures under

Light electric or other tungsten light.

Fluorescent Use this mode when taking pictures under

Light fluorescent light.

Manual Use this mode when taking pictures by adjusting

the white balance manually.

zSelect [White Balance] from the [Rec.Mode] menu.

xPress the four-way controller ( ).

The white balance screen will be

displayed.

cUse the four-way controller ( )

to change the setting.

vPress the Playback/OK button

twice.

The camera is ready to take the picture.

Saving the White Balance p.74

MENU OK

Exit

White Balance

AWB

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Selecting the Quality Levels

You can choose the image compression rate.

BEST The quality is better and there is a high volume of

image data.

BETTER Standard level

GOOD

The quality is good and there is a low volume

of image data.

zSelect [Quality Level] from the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the image quality.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

e04KB335_33e.qk 6/6/02 4:39 PM Page 64 (1,1)

Taking Pictures

Changing the AF Area (Focusing Area)

You can change the range of the autofocus area.

Multiple Normal area

Spot The area becomes narrower.

zSelect [Focusing Area] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the setting.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

The AF area does not appear in the viewfinder. Always check the

focusing area on the LCD monitor.

memo

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Quality Level

White Balance

Spot

Exit

Focusing Area

Digital Zoom

Recorded Pixels

AWB

(1/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Manual Setting

zSelect [ ] (manual) on the white

balance screen.

xPoint your camera at a blank sheet

of paper so that it fills the screen.

cPress the Display button.

Adjustment will start and [Adjusting]

will appear on the LCD monitor. When adjustment has been

completed, [Complete] will appear on the LCD monitor and

the screen will return to the menu screen.

vPress the Playback/OK button.

The camera is ready to take the picture.

If the Display button is again pressed while [Adjusting] is displayed

on the LCD monitor, the white balance adjustment will be repeat-

ed, starting from the beginning. Press the Playback/OK button to

cancel adjustment while in progress.

memo

MENU OK

Exit

Adjust

DISPLAY

White Balance

AWB

e04KB335_33e.qk 6/6/02 4:39 PM Page 66 (1,1)

Taking Pictures

Setting the ISO Speed (ISO Speed)

You can select the ISO speed to suit the brightness of the sur-

roundings.

●ISO Speed

Auto The camera sets the speed automatically.

100 (430RS) Produces sharp images with little or no noise. Decreases the

125 (330RS) shutter speed in low light conditions.

200 (430RS) Increases the shutter speed in low light conditions but there is

250 (330RS) more risk of noise.

zSelect [ISO Speed] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the ISO speed.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

Saving the ISO Speed p.74

MENU OK

Memory

AE Metering

ISO Speed

Instant Review

0.5sec

100

Off

Exit Ok

Rec.Mode

Set-up

Interval Shooting

Time-lapse Movie

(2/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Setting the Light Metering Range to Determine the Exposure (AE Metering)

You can choose which part of the screen to use to measure the

brightness and determine the exposure.

Multi segment

The exposure is determined by the entire screen.

Center-weighted The exposure is determined mainly by the center of the screen.

Spot

The exposure is determined by the middle of the screen only.

zSelect [AE Metering] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the metering mode.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

Saving the AE Metering Method p.74

MENU OK

Memory

AE Metering

ISO Speed

Instant Review

0.5sec

Auto

Off

Exit Ok

Rec.Mode

Set-up

Interval Shooting

Time-lapse Movie

(2/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

e04KB335_33e.qk 6/6/02 4:39 PM Page 68 (1,1)

Taking Pictures

Setting the Image Sharpness (Sharpness)

You can choose whether you want the image to have sharp or soft

outlines.

zSelect [Sharpness] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the setting from [Normal]

to [Hard (+)] or [Soft (–)].

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

MENU OK

Memory

Sharpness

Parallel Mode

Saturation

Contrast

Exit Ok

Rec.Mode

Set-up

Applied Photo Mode

(3/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Setting the Instant Review Time (Instant Review)

You can choose the Instant Review time from 0.5sec, 1sec, 2sec,

3sec, 4sec, 5sec or Off (no display).

zSelect [Instant Review] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the display time.

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

The Instant Review display setting is saved when the camera is

turned off.

memo

MENU OK

Memory

AE Metering

ISO Speed

Instant Review

2sec

Auto

Off

Exit Ok

Rec.Mode

Set-up

Interval Shooting

Time-lapse Movie

(2/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

e04KB335_33e.qk 6/6/02 4:39 PM Page 70 (1,1)

Taking Pictures

Setting the Image Contrast (Contrast)

You can set the image contrast.

zSelect [Contrast] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the setting from [Normal]

to [Hard (+)] or [Soft (–)].

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

MENU OK

Memory

Sharpness

Parallel Mode

Saturation

Contrast

Exit Ok

Rec.Mode

Set-up

Applied Photo Mode

(3/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

Setting the Color Saturation (Saturation)

You can set the color saturation.

zSelect [Saturation] on the [Rec.Mode] menu.

xUse the four-way controller ( )

to change the setting from [Normal]

to [Hard (+)] or [Soft (–)].

cPress the Playback/OK button.

The camera is ready to take the pic-

ture.

MENU OK

Memory

Sharpness

Parallel Mode

Saturation

Contrast

Exit Ok

Rec.Mode

Set-up

Applied Photo Mode

(3/3)

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

e04KB335_33e.qk 6/6/02 4:39 PM Page 72 (1,1)

Taking Pictures

zPress the Menu button in Capture

mode.

xPress the four-way controller ( ).

[Memory] menu will be displayed.

cUse the four-way controller ( )

to select the item.

vUse the four-way controller ( )

to switch (On) and (Off).

bPress the Playback/OK button.

The camera is ready to take the pic-

ture.

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Flash

White Balance

EV Compensation

Exit

Digital Zoom

AE Metering

Rec.Mode

Set-up

(1/3)

Saving the Settings (Memory)

Saving the Menu Items (Mode Memory)

You can choose whether you want the set values to be saved when the

camera is turned off. If you select (On), the settings will be saved in

the status they were in immediately before the camera was turned off. If

you select (Off), the settings will be reset to the defaults when the cam-

era is turned off.

Item Description

Default Setting

Flash

White Balance

EV Compensation

Digital Zoom

AE Metering

ISO Speed

Focus Mode

Zoom Position

DISPLAY

File #

Menu items not included in [Memory] will also be saved in the set-

tings selected on the menus for each function when the camera is

turned off.

memo

The setting on the button is saved.

The [White Balance] setting on the [Rec.Mode] menu is

saved.

The set EV compensation value is saved.

The [Digital Zoom] setting on the [Rec.Mode] menu is

saved.

The [AE Metering] setting on the [Rec.Mode] menu is

saved.

The [ISO Speed] setting on the [Rec.Mode] menu is

saved.

The focus mode setting is saved.

The zoom position setting is saved.

The manual focus position is saved.

The LCD monitor display mode is saved.

The file number is saved. If a new CF card is inserted,

the sequential file number is assigned.

e04KB335_33e.qk 6/6/02 4:39 PM Page 74 (1,1)

Playback/Erasing

Playing Back Images

When the CF card is installed, the images recorded on the CF

card are played back. When the CF card is not installed, the

images recorded in the built-in memory are played back.

Press the Playback/OK button to enter the playback mode.

Playing Back Still Pictures

See “Playing Back Previous or Next Images” (p.23).

Zoom Display

You can display images magnified up to four times. A guide to

operation is displayed on the LCD monitor during magnification.

zEnter the Playback mode and choose the image you want

to magnify with the four-way controller ( ).

xPress on the Zoom button.

The image will be magnified (1×to 4×).

●The following operations can be performed while the mag-

nified image is displayed.

Four-way controller ( )

Moves the position to be magnified

Zoom button ( ) Makes the image larger

Zoom button ( ) Makes the image smaller

Display button Turns the guide marks on/off

cPress the Playback/OK button.

Zoom playback will end.

When the [Quick Enlargement] on the [Set-up] menu is turned on,

the images is displayed four times larger when you press on

the zoom button in step x.

Movie pictures cannot be magnified.

Caution

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 76 (1,1)

Playback/Erasing

Displaying Shooting Information (Display Mode)

You can display information on the LCD monitor when shooting.

The information displayed can be changed by pressing the Display

button.

Display On

Information is displayed when

shooting.

qFolder name wFile name

eProtect symbol

rShooting date

tBattery symbol

Histogram Display

The brightness distribution of the

image is displayed.

The x-axis shows the brightness

(darkest at the left end and brightest

at the right end) and the y-axis

shows the pixel numbers.

qHistogram

wRecorded pixels

eQuality level

rWhite balance

tAE metering yISO speed

uAperture iShutter speed

Display Off

No information is displayed when

shooting.

100-0019100-0019

11:19 11:19

100-0020100-0020

6/10/20026/10/2002

321

➞➞

Display On

Playing Back Movie Pictures

You can play back Movie pictures. A guide to operation is dis-

played on the LCD monitor during playback.

Enter the Playback mode and choose the movie picture

you want to play back with the four-way controller ( ).

xPress the four-way controller ( ).

Playback will start.

●The following operations can be

performed during playback.

Four-way controller ( ) :

Reverse playback

Four-way controller ( ) :

Forward playback

Four-way controller ( ) : Pause

Display button : Changes the Display mode

●The following operations can be performed while Pause is

engaged.

Four-way controller ( ) : Frame reverse

Four-way controller ( ) : Frame forward

Four-way controller ( ) : Releases the Pause function

Display button : Changes the Display mode

cPress the four-way controller ( ).

Movie playback will end.

100-0019100-0019

11:19 11:19

6/10/20026/10/2002

zxc

1/125

F2.6

1/125

F2.6

AWB

2048

AUTO

11:19 11:19

6/10/20026/10/2002

100-0021100-0021

6 5

➞

e05KB335_33e.qk 6/6/02 4:28 PM Page 78 (1,1)

Playback/Erasing

Erasing Images

Erasing a Single Image

zEnter the Playback mode and choose the image you want

to erase with the four-way controller ( ).

xPress the button.

The Delete screen will be displayed.

cSelect [Delete] with the four-way

controller ( ).

vPress the Playback/OK button.

• You can also delete images from Instant Review (p.21).

• You cannot erase protected images (with the symbol).

• Step ccan be omitted if you turn on the [Quick Delete] on the

[Set-up] menu.

memo

100-0020100-0020

Stop

Delete

MENU OK

ExitExitExit

All ImagesAll Images

OkOkOk

Playback/Erasing

Nine-image Display

You can display nine images at the same time.

zEnter the Playback mode and choose an image with the

four-way controller ( ).

xPress the button.

Nine images will be displayed with

the selected image in the center.

Choose an image with the four-way

controller ( ).

When 10 or more images have been

recorded, the previous 9 images will

be displayed if you press the four-

way controller ( ) while an image

on the left row is selected. If you

press the four-way controller( )

while an image on the right row is

selected, next 9 images will be dis-

played.

cPress the Playback/OK button.

The screen will return to single-image display of the selected

image.

For movie pictures, the first frame will be displayed.

memo

Selected image

e05KB335_33e.qk 6/6/02 4:28 PM Page 80 (1,1)

Playback/Erasing

Protecting Images from Deletion (Protect)

You can protect images from being accidentally erased.

zEnter the Playback mode and choose the image you want

to protect with the four-way controller ( ).

xPress the button.

The Protect screen will be displayed.

cSelect [Protect] with the four-way

controller ( ).

vPress the Playback/OK button.

•

Select [Unprotect] in step cabove to release the Protect setting.

• If the image is protected, the symbol is displayed when the

image is played back.

Protecting All Images

You can protect all the images.

zEnter the Playback mode.

xPress the button twice.

The Protect (All) screen will be displayed.

cSelect [Protect] with the four-way controller ( ).

vPress the Playback/OK button.

• Even protected images will be erased by formatting the CF

card or the built-in memory.

• If the CF card is installed, only the images recorded on the

CF card will be protected.

Caution

memo

100-0020100-0020

Unprotect

Protect

MENU OK

ExitExitExit

All ImagesAll Images

OkOkOk

Erasing All Images

You can erase all the images at once.

• Once erased, images cannot be restored.

• Protected images cannot be erased.

• If the CF card is installed, only the images recorded on the

CF card will be deleted.

zEnter the Playback mode and press

the button twice.

The Delete (All) screen will be dis-

played.

xSelect [All Images] with the four-

way controller ( ).

cPress the Playback/OK button.

Step xcan be omitted if you turn on the [Quick Delete] on the

[Set-up] menu.

memo

Caution

100-0020100-0020

Stop

All Images

MENU OK

ExitExitExit

Delete all images

on the memory card?

OkOkOk

e05KB335_33e.qk 6/6/02 4:28 PM Page 82 (1,1)

cUse the four-way controller ( )

to select the number of prints and

press the four-way controller ( ).

The frame will move to [Date].

vUse the four-way controller ( )

to select (On) and (Off).

: The date will be imprinted

: The date will not be imprinted

bPress the Playback/OK button.

Prints can be made according to the settings.

If DPOF settings have already been made for an image, the previ-

ously set number of prints and On/Off date setting will be dis-

played.

• DPOF settings cannot be made on the images and movie

pictures saved in the built-in memory. Copy them to the CF

card (p.106) and make DPOF settings.

• Depending on the printer or printing equipment at the

photo tab, the date may not be imprinted on the pictures

even if the DPOF setting was made.

Caution

memo

Playback/Erasing

MENU OK

ExitExitExit

All ImagesAll Images

OkOkOk

100-0020100-0020

Date

Copies 3

Setting the Printing Service

You can print the images on the CF card using a DPOF (Digital Print

Order Format) compatible printer or at a printing service.

Printing Single Image

Set the following items for each image.

●Copies

Set the number of prints up to a maximum of 99.

●Date

Specify whether you want the date imprinted on the picture or not.

zEnter the Playback mode and choose the image for which

you want to specify the number of prints with the four-

way controller ( ).

xPress the DPOF button.

The DPOF screen will be displayed.

zcv

MENU OK

ExitExitExit

All ImagesAll Images

OkOkOk

100-0020100-0020

Date

Copies 1

e05KB335_33e.qk 6/6/02 4:28 PM Page 84 (1,1)

Printing All Images

zEnter the Playback mode and press the DPOF button

twice.

The DPOF (ALL) screen will be dis-

played.

xUse the four-way controller ( )

to select the number of prints.

You can specify up to 99 prints.

cPress the four-way controller ( ).

The frame will move to [Date].

vUse the four-way controller ( )

to select (On) and (Off).

: The date will be imprinted

: The date will not be imprinted

bPress the Playback/OK button.

Prints can be made according to the settings.

• The setting for a single image will be cancelled.

• When you specify the number of prints in the DPOF setting, the

number applies to all the images. Before printing, check that the

number is correct.

DPOF settings cannot be made on the images and movie

pictures saved in the built-in memory. Copy them to the CF

card (p.106) and make DPOF settings.

Caution

memo

Playback/Erasing

Viewing Images with Windows PC

By using the provided USB cable (I-USB6) or card reader and

image-browser software, you can transfer images recorded with

the camera to a PC and edit them or print them out.

This section explains how to view images on a PC using the pro-

vided USB driver and software.

About the included software

The included CD-ROM (S-SW5) contains the following software:

- USB driver

- Image viewing software (ACDSee™ 3.1)

System environment

OS: Windows 98/98SE/2000/Me

Windows XP Home Edition/Professional

CPU: Pentium or later recommended

Memory: 64MB or more

Hard disk space: 15MB or more

Standard equipped USB port

To view movie pictures on your PC, Direct X 8.0 and Media Player

pre-installed on system, or QuickTime 3.0 or later are required.

For Windows Me/XP, Media Player pre-installed on system,

QuickTime 3.0 or later is required.

• Not compatible with Windows 95.

• When you connect the camera to your PC, you are recom-

mended to use the AC adapter. If the battery power runs

out while image data is being transferred, the data may be

lost.

Caution

MENU OK

ExitExitExit OkOkOk

DPOF setting for all images.

100-0020100-0020

Date

Copies

xcv

If you have already installed the driver for Optio 430/330 on your PC

Windows 98/98SE or Windows Me, do not connect the Optio

430RS/330RS to your PC. Otherwise your PC may freeze up. This phe-

nomenon can be resolved by updating the driver installed on your PC.

For more information, please refer to our web site.

http://www.digital.pentax.co.jp/

To customers who have already purchased Optio 430/330

e05KB335_33e.qk 6/6/02 4:28 PM Page 86 (1,1)

Playback/Erasing

If you are using Windows 98/98SE, follow the procedure

below to install the software. For Windows Me, see p.91, and

for Windows 2000, see p.93.

●Windows 98/98SE

bClick [Next].

nSelect [Search for the

best driver for your

device (Recommended)],

and then click [Next].

mSelect [Specify a loca-

tion], and then click

[Browse].

If any other item has been

selected, click the check

box to unselect it.

,Specify the [Win] folder

in the CD-ROM drive and

click [OK].

If you click the [+] symbol,

the folder will open and dis-

play the files inside.

Installing the software

The procedures for installing the necessary software are

explained.

• The installation procedure varies depending on the version

of Windows (98/98SE/Me/2000). Before starting installa-

tion, check which version of Windows you have on your

PC. If you are using Windows XP, see “Installing the USB

Driver (Windows XP)” (p.95) for installation instructions.

• If you are using Windows 2000 or Windows XP

(Professional), log in by the administrator before starting

installation. Refer to your PC’s operation manual for

instructions on how to log in.

• Either “430RS” or “330RS” will be displayed in the installa-

tion screen area where “xxxxx” is displayed.

Installing the USB driver (Windows 98/98SE/Me/2000)

zTurn on your PC.

xSet the included CD-ROM (S-SW5) in the CD-ROM drive.

cTurn the camera off, and connect the PC and camera

using an USB cable.

vTurn the camera on.

The PC recognizes the camera and the [Add New Hardware

Wizard] screen is displayed.

Caution

e05KB335_33e.qk 6/6/02 4:28 PM Page 88 (1,1)

Playback/Erasing

●Windows Me

bSelect [Specify the location of

the driver (Advanced)], and

then click [Next].

nSelect [Specify a location], and

then click [Browse].

If [Removable Media] has been

selected, click the check box to

unselect it.

mSpecify the [Win] folder in the

CD-ROM drive and click [OK].

If you click the [+] symbol, the

folder will open and display the

files inside.

,Make sure that the [Win] folder

is selected and click [Next].

.Make sure that [penusbp.inf] is

selected, then click [Next].

Installation starts.

.Make sure that the [Win]

folder is selected and

click [Next].

⁄0 Make sure that

[penusbp.inf] is selected,

then click [Next].

Installation starts.

⁄1 Click [Finish].

Installation is completed

and the [Wizard] screen is

closed.

⁄2 Turn the camera off and restart your PC.

When Windows is up and running, turn the camera on.

⁄3 Double-click the [My

Computer] icon on the

desktop.

When the camera is turned

on, the Removable Disk

icon appears in the win-

dow.

The CF card, if installed, is regarded as the removable disk. If the

CF card is not installed, the built-in memory is regarded as the

removable disk.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 90 (1,1)

Playback/Erasing

●Windows 2000

bClick [Next].

nSelect [Search for the best dri-

ver for your device], and then

click [Next].

mSelect [Specify a location], and

then click [Next].

If any other item has been select-

ed, click the check box to unselect

it.

,Click [Browse].

The [Files] screen is displayed.

.Select the [Win] folder in the

CD-ROM drive and make sure

that [penusbp.inf] is displayed.

And then click [Open].

⁄0 Click [Finish].

Installation is completed and the

[Wizard] screen is closed.

⁄1 Turn the camera off and restart your PC.

When Windows is up and running, turn the camera on.

⁄2 Double-click the [My Computer]

icon on the desktop.

When the camera is turned on,

the Removable Disk icon appears

in the window.

The CF card, if installed, is regarded as the removable disk. If the

CF card is not installed, the built-in memory is regarded as the

removable disk.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 92 (1,1)

Playback/Erasing

Installing the USB driver (Windows XP)

zTurn on your PC.

xSet the CD-ROM (S-SW5) supplied with the camera in the

CD-ROM drive.

cTurn the camera off and connect the PC and camera

using the USB cable.

vTurn the camera on.

[New hardware has been located]

will appear on the task bar and

the [New Hardware Search

Wizard] screen will be displayed.

bSelect [Install the software auto-

matically (Recommended)] and

click [Next].

⁄0 Make sure that the [Win] folder

containing the files to be copied

is selected, and click [OK].

⁄1 Make sure that [penusbp.inf] is

selected, then click [Next].

Installation starts.

⁄2 Click [Finish].

Installation is completed and the

[Wizard] screen is closed.

⁄3 Double-click the [My Computer]

icon on the desktop.

When the camera is turned on,

the Removable Disk icon appears

in the window.

The CF card, if installed, is regarded as the removable disk. If the

CF card is not installed, the built-in memory is regarded as the

removable disk.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 94 (1,1)

Playback/Erasing

Installing ACDSee™

When installing ACDSee™, recorded images can be viewed on

your PC.

zTurn on your PC.

xSet the CD-ROM (S-SW5) in the CD-ROM drive.

cDouble click [My Computer].

vDouble click the [CD-ROM drive] icon.

bDouble click your language choice.

You can choose the language from the following: English,

French, German, Spanish, Italian and Japanese.

nDouble click [setup.exe].

The Setup screen will appear. Follow the on-screen guidance

and enter the registration information.

mWhen the installation is completed, restart Windows.

nWhen [The software has been

successfully installed] message

appears, click [Finish].

Installation is completed and the

[Wizard] screen is closed.

If the screen for choosing an auto-

matic Windows operation is dis-

played, click [Cancel].

mClick [My Computer] from [Start]

menu.

After installing the software, make

sure that a Removable Disk has

been added to [My Computer].

• The CF card, if installed, is regarded as the removable disk. If

the CF card is not installed, the built-in memory is regarded as

the removable disk.

• In the case of Windows XP, if the CF card has a volume label

attached, the content of the volume label will be displayed

instead of [Removable Disk]. If the CF card is new and has not

been formatted, the manufacturer and capacity of the card will

be displayed.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 96 (1,1)

Playback/Erasing

Viewing images on your PC

zDouble click the [ACDSeeTM] icon on the desktop.

xSelect the image to view.

Camera images can be found in [My Computer] ➝

[Removable Disk (or the name on the volume label on the CF

card, if there is one)] ➝[DCIM] ➝ [xxxPENTX] (xxx is a 3-

digit numeral) folder.

You can also view movie pictures operating the above procedures.

memo

Connecting the camera and PC

zTurn on your PC.

xTurn the camera off and connect the PC and camera

using an USB cable.

cTurn on the camera.

The camera will be

detected as

[Removable Disk] in

[My Computer].

• The CF card, if installed, is regarded as the removable disk. If

the CF card is not installed, the built-in memory is regarded as

the removable disk.

• Although images can be viewed and printed, image data is in

the built-in memory or on the CF card in the camera. To save

the image data in the built-in memory or on the CF card to

another medium, refer to the instruction manual of your PC and

move or copy files using Explorer, etc. You can edit images on

your PC after moving or copying files there.

• In the case of Windows XP, if the CF card has a volume label

attached, the content of the volume label will be displayed

instead of [Removable Disk]. If the CF card is new and has not

been formatted, the manufacturer and capacity of the card will

be displayed.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 98 (1,1)

101

Playback/Erasing

100

Playback/Erasing

Disconnecting your camera from your PC (Windows XP)

zClick [Remove Hardware icon] on

the task bar.

xMake sure [PENTAX USB Disk

Device] is selected and click [Stop].

cMake sure [PENTAX USB Disk

Device] is selected and click [OK].

vA message confirming removal of

the hardware will appear. Turn the

camera off and disconnect your

camera from your PC.

Disconnecting the camera from your PC

Disconnecting the camera from your PC (Windows 2000)

zDouble click (Hot Plug icon) on

the lower right task bar tray of the

desktop.

The [Remove Hardware] screen will

be displayed.

xMake sure [PENTAX USB Disk Device]

is selected and click [Stop].

[Stop Hardware Device] screen will

be displayed.

cMake sure [PENTAX USB Disk

Device] is selected and click [OK].

A message will appear.

vClick [OK].

bDisconnect the USB cable from

your PC and camera.

For Windows 98/98SE/Me, there is no Hot Plug icon. When remov-

ing the camera, turn off the camera and disconnect the USB

cable.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 100 (1,1)

103

Playback/Erasing

102

Playback/Erasing

Installing the software

The procedures for installing the necessary software are

explained.

Installing the USB driver (Only for Mac OS 8.6)

zTurn on your Macintosh.

xSet the included CD-ROM (S-SW5) in the CD-ROM drive

of your Macintosh.

cCopy the following 2 files to the [Extensions] folder

within the System folder.

PENTAX-USB Storage Driver

PENTAX-USB Storage Shim (E)

vRestart your Macintosh.

For MacOS 9.x or later, there is no need to install the USB driver.

Installing ACDSeeTM

When installing ACDSeeTM, recorded images can be viewed on

your Macintosh.

zTurn on your Macintosh.

xSet the included CD-ROM (S-SW5) in the CD-ROM drive

of your Macintosh.

cDouble click your language choice.

You can choose the language from the following: English,

French, German, Spanish, Italian and Japanese.

vFollow the on-screen guidance and enter the registration

information and proceed with the installation.

memo

Viewing Images with Macintosh

By using the provided USB cable (I-USB6) or card reader and

image-browser software, you can transfer images recorded with

the camera to a PC and edit them or print them out.

This section explains how to view images on a PC using the pro-

vided USB driver and software.

About the included software

The included CD-ROM (S-SW5) contains the following software:

- USB driver

- Image viewing software (ACDSee™)

System environment

OS: Mac OS 8.6 or later (QuickTime 4.0 or later required)

CPU: Power PC 266MHz or higher

Memory: 8MB or more

Hard disk space: 6MB or more

Standard equipped USB port

To view movie pictures on your Macintosh, QuickTime 4.0 or later

pre-installed on system is required.

When you connect the camera to your PC, you are recom-

mended to use the AC adapter. If the battery power runs out

while image data is being transferred, the data may be lost.

Caution

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 102 (1,1)

105

Playback/Erasing

104

Playback/Erasing

Viewing images on your Macintosh

zDouble click the [ACDSee™] folder on the hard drive.

xDouble click the [ACDSee™] program icon.

cChoose an image you wish to view.

Camera images can be found in the [untitled] ➝ [DCIM] ➝

[xxxPENTX] (xxx is a 3-digit numeral) folder on the desktop.

• You can also view movie pictures operating the above proce-

dures.

• If the CF card has a volume label attached, the content of the

volume label will be displayed instead of [Removable Disk]. If

the CF card is new and has not been formatted, the manufac-

turer and capacity of the card will be displayed.

Disconnecting the camera from your Macintosh

zDrag the [untitled (or the name on the volume label on

the CF card, if there is one)] folder on the desktop to

Trash.

xRemove the USB cable from your Macintosh and camera.

memo

Connecting the camera and your Macintosh

zTurn on your Macintosh.

xTurn off the camera and connect your Macintosh and

camera using an USB cable.

cTurn on the camera.

The camera will be detected as [untitled] on the desktop. The

folder name can be changed as desired.

• The CF card, if installed, is regarded as “untitled.” If the CF

card is not installed, the built-in memory is regarded as “unti-

tled.”

• Although images can be viewed and printed, image data is in

the built-in memory or on the CF card in the camera. To save

the image data in the built-in memory or on the CF card to

another medium, refer to the instruction manual of your

Macintosh and move or copy files. You can edit images on your

Macintosh after moving or copying files there.

• If the CF card has a volume label attached, the content of the

volume label will be displayed instead of [Removable Disk]. If

the CF card is new and has not been formatted, the manufac-

turer and capacity of the card will be displayed.

memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 104 (1,1)

Copying from CF card to built-in memory

The images saved in the CF card are copied to the built-in memo-

ry one image at a time.

zSelect [Copy Image] on the [Set-up] menu.

xPress the four-way controller ( ).

The Copy Image screen will be displayed.

cPress the four-way controller ( ) to select [ ].

vPress the Playback/OK button.

The image that can be copied will be

displayed.

bUse the four-way controller ( )

to select the image to copy.

nPress the Playback/OK button.

Copy of the image starts. When it is finished, the screen will

return to the previous screen.

When you want to copy images continuously, repeat steps band

n. To go back to the Capture mode, press the shutter release but-

ton half-way (or fully).

memo

106

Editing Images/Settings

107

Editing Images/Settings

MENU OK

Exit

Copy Image

Cancel

MENU OK

ExitExit OkOkExit Ok

100-0020100-0020

CopCopy y This ImaThis ImageCopy This Image

Twice

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Editing Images/Settings

Editing Images

How to recall the [Set-up] menu

Copying the Image

Images can be copied between the built-in memory and the CF

card and vice versa.

Copying from built-in memory to CF card

All images saved in the built-in memory are copied to the CF card.

zSelect [Copy Image] on the [Set-up] menu.

xPress the four-way controller ( ).

The Copy Image screen will be dis-

played.

cPress the Playback/OK button.

Copying of images starts. When it is

finished the Capture or Playback

mode is enabled.

If the CF card memory is insufficient [Memory card full.

Cannot Copy] appears on the LCD monitor. Replace the CF

card with new one, or erase unnecessary images.

Caution

Menu button

Playback/OK button

Four-way controller

e06KB335_33e.qk 6/6/02 4:40 PM Page 106 (1,1)

How to recall the [Set-up] menu

If the built-in memory space is insufficient, [Built-in Memory

Full. Cannot Copy] appears on the LCD monitor. Format the

built-in memory, or erase unnecessary images.

Trimming Images

Part of the image can be trimmed and saved as another image.

zSelect [Trimming] on the [Set-up] menu.

xPress the four-way controller ( ).

The image that can be trimmed will be displayed.

cUse the four-way controller ( ) to choose the image

you want to trim.

vPress the Playback/OK button.

The Trimming screen will be displayed.

bTrim the image.

●Operations available on the Trimming screen

Zoom button Changes the size of image.

Four-way controller Moves the trimming location up, down,

right, or left.

Menu button Returns to the Menu screen.

Caution

109

Editing Images/Settings

108

Editing Images/Settings

MENU OK

ExitExit OkOkExitSizSizeSize Ok

nPress the Playback/OK button.

mUse the four-way controller ( )

to choose the size.

,Press the four-way controller ( ).

The frame will move to [Quality Level].

.Use the four-way controller ( )

to choose the image quality.

⁄0 Press the Playback/OK button.

The trimmed image will be saved as another image.

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

MENU OK

ExitExit OkOkExit Ok

Select resolution and quality.

100-0020100-0020

Quality Level

Recorded Pixels

640×480

e06KB335_33e.qk 6/6/02 4:40 PM Page 108 (1,1)

111

Editing Images/Settings

How to recall the [Set-up] menu

Changing the Image Size (Resize)

The recorded pixels and quality of the selected image can be

altered to change the file to a smaller size. The image whose size

is changed can be overwritten on the original image, or saved as

another image.

zSelect [Resize] on the [Set-up] menu.

xPress the four-way controller ( ).

The Resize screen will be displayed.

cUse the four-way controller ( ) to select the image to

resize.

vPress the Playback/OK button.

bUse the four-way controller ( ) to select [Recorded

Pixels].

nPress the four-way controller ( ).

The frame will move to [Quality Level].

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

110

Editing Images/Settings

Twice

Menu button

Playback/OK button

Four-way controller

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

ExitExit OkOkExit Ok

100-0020100-0020

ResizResize e This ImaThis ImageResize This Image

MENU OK

ExitExit OkOkExit Ok

100-0020100-0020

Select resolution and quality.

Quality Level

Recorded Pixels

640×480

mUse the four-way controller ( ) to select [Quality

Level].

,Press the Playback/OK button.

.Use the four-way controller ( ) to select [Overwrite]

or [Save as].

⁄0 Press the Playback/OK button.

The image will be resized.

• The size of a movie picture cannot be changed.

• In Optio 430RS, part of the image is cut when the size of a still

picture of 2304 ×1712 is resized.

memo

e06KB335_33e.qk 6/6/02 4:40 PM Page 110 (1,1)

112

Editing Images/Settings

Camera Settings

How to recall the [Set-up] menu

Formatting

If the CF card is installed, all data stored on the CF card will be

deleted and the CF card will be formatted. If the CF card is not

installed, all data stored in the camera’s built-in memory will be

deleted and the built-in memory will be formatted.

• Do not open the CF card cover while the card is being for-

matted. The card may be damaged and become unusable.

• Formatting will delete protected data too.

zSelect [Format] on the [Set-up] menu.

xPress the four-way controller ( ).

The Format screen will be dis-

played.

cSelect [Format] with the four-way

controller ( ).

vPress the Playback/OK button.

Formatting will start. When formatting is completed, the cam-

era is ready to capture or play back images.

Caution

113

Editing Images/Settings

Menu button

Playback/OK button

Four-way controller

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Exit

Format

Formatting will delete everything

in the memory card.

Cancel

Format

Sounding the Alarm at a Set Time

You can sound the alarm at a specified time and display a selected image.

Checking the Alarm

zSelect [Alarm] on the [Set-up] menu.

xPress the four-way controller ( ).

The alarm list will be displayed.

The alarms that are enabled will be

indicated by .

cPress the Playback/OK button three times.

If any alarms are enabled, the cam-

era will be turned off and the alarms

will be set.

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

MENU OK

Everyday

18:00

2Once 11:00

3Off 00:00

Exit Ok

Alarm

e06KB335_33e.qk 6/6/02 4:40 PM Page 112 (1,1)

115

Editing Images/Settings

114

Editing Images/Settings

How to recall the [Set-up] menu

Setting the Alarm

zSelect [Alarm] on the [Set-up] menu.

xPress the four-way controller ( ).

The alarm list will be displayed.

cUse the four-way controller ( ) to select 1-3.

vPress the four-way controller ( ).

The screen for setting the operating

mode and time will be displayed.

Four-way controller ( ) :

Selects the item

Four-way controller ( ) :

Changes the settings

bPress the DPOF button.

nSelect the image to be displayed when the alarm sounds

with the four-way controller ( ).

mPress the Playback/OK button.

,Press the Playback/OK button 3 times.

Setting is completed and the camera is turned off.

MENU OK

Everyday

18:00

2Once 11:00

3Off 00:00

Exit Ok

Alarm

MENU OK

Everyday

18:00

Exit Ok

Alarm

Image

Turning the Alarm Off

When the camera is turned off and the set time is reached, the

alarm sounds for one minute.

When it finishes sounding, the power is automatically turned off.

You can turn the alarm off by pressing any button (except the

Zoom button).

The alarm does not sound when the camera is turned on.

Setting the Beep

The beep sound can be turned on and off.

zSelect [Beep] on the [Set-up] menu.

xUse the four-way controller ( ) to select [On] or [Off].

cPress the Playback/OK button.

The camera is ready to capture or play back images.

Caution

memo

Menu button

Playback/OK button

Four-way controller

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

e06KB335_33e.qk 6/6/02 4:40 PM Page 114 (1,1)

117

Editing Images/Settings

116

Editing Images/Settings

How to recall the [Set-up] menu

Changing the Start-up Screen

Images recorded with the Optio 430RS/330RS can be displayed

as the start-up screen when the camera is turned on.

zSelect [Start-up Screen] on the [Set-up] menu.

xPress the four-way controller ( ).

cPress the DPOF button.

vUse the four-way controller ( ) to select the image

you want to use as the start-up screen.

bPress the Playback/OK button.

nUse the four-way controller ( ) to select (On) or

(Off).

mPress the Playback/OK button twice.

The camera is ready to capture or play back images.

Once set, the start-up screen is not deleted even if you erase the

original image, or the format of the built-in memory or CF card.

memo

Setting the Date Style

You can set the style in which the date is displayed on the camera.

Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].

zSelect [Date Style] on the [Set-up] menu.

xUse the four-way controller ( ) to change the date

style.

cPress the Playback/OK button.

The camera is ready to capture or play back images with the

selected date style.

Changing the Date/Time

You can change the initial date and time settings.

zSelect [Date Adjust] on the [Set-up] menu.

xPress the four-way controller ( ).

The date screen will be displayed.

See “Initial Settings” (p.16) for the setting procedure.

Menu button

Playback/OK button

Four-way controller

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

MENU OK

Rec.Mode

Memory

Exit Ok

Set-up

Start-up Screen

Date Style mm/dd/yy

1/ 1/2002

Off

Date Adjust

World Time

(2/3)

English

Seven

times

e06KB335_33e.qk 6/6/02 4:40 PM Page 116 (1,1)

119

Editing Images/Settings

118

Editing Images/Settings

nSelect [DST] On ( ) or Off (no display) with the four-way

controller

( ) and press the four-way controller ( ).

The frame will move to [ ] (home time city).

Use the four-way controller ( ) to change the Home

Time city and DST setting.

mPress the Playback/OK button.

The camera is ready to capture or play back images with the

time in the selected city.

See p.124 for the list of cities and code names.

Changing the Display Language

You can change the language in which the menus, error mes-

sages, etc. are displayed.

zSelect [Language] on the [Set-up] menu.

xUse the four-way controller ( ) to select the lan-

guage.

cPress the Playback/OK button.

The camera is ready to capture or play back images.

memo

How to recall the [Set-up] menu

Setting the World Time

The city and time selected in “Initial Settings” (p.16) serve as the

World Time setting.

You can display the time in a city other than the Home Time city

(World Time) when shooting or playing back.

zSelect [World Time] on the [Set-up] menu.

xPress the four-way controller ( ).

The World Time screen will be dis-

played.

cSwitch (On) and (Off) with

the four-way controller ( ).

: The time in the country selected

in World Time will be displayed.

: The time in the country select-

ed in Home Time will be dis-

played.

vPress the four-way controller ( ).

The frame will move to [ ] (world time city).

bUse the four-way controller ( ) to select the World

Time city and press the four-way controller ( ).

World Time

MENU OK

Exit Ok

NYC

TYO

9 18AM

4 18AM

Menu button

Playback/OK button

Four-way controller

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

MENU OK

Rec.Mode

Memory

Exit Ok

Set-up

Start-up Screen

Date Style mm/dd/yy

1/ 1/2002

Off

Date Adjust

World Time

(2/3)

English

Seven

times

e06KB335_33e.qk 6/6/02 4:40 PM Page 118 (1,1)

121

Editing Images/Settings

Quick Delete

When you turn on the quick delete, the Delete screen is displayed

with [Delete] and [All Images] selected.

zSelect [Quick Delete] on the [Set-up] menu.

xUse the four-way controller ( ) to select [On] or [Off].

cPress the Playback/OK button.

The camera is ready to capture or play back images.

Quick Enlargement

You can play back the image in the maximum enlargement only by

pressing the Zoom button once.

zSelect [Quick Enlargement] on the [Set-up] menu.

xUse the four-way controller ( ) to select [Off] or [On].

cPress the Playback/OK button.

The camera is ready to capture or play back images.

120

Editing Images/Settings

How to recall the [Set-up] menu

Powersaving Function (Sleep Timeout)

You can set the LCD monitor to turn off automatically when no

operation is performed for a fixed time.

zSelect [Sleep Timeout] on the [Set-up] menu.

xUse the four-way controller ( ) to select [30sec],

[1min], [2min] or [Off].

cPress the Playback/OK button.

The camera is ready to capture or play back images.

Auto Power Off Function

You can set the camera to turn off automatically when no opera-

tion is performed for a fixed time.

zSelect [Auto Power Off] on the [Set-up] menu.

xUse the four-way controller ( ) to select [3min],

[5min] or [Off].

cPress the Playback/OK button.

The camera is ready to capture or play back images.

If you do not perform any operation for one minute after the menu

is displayed, the menu will be closed.

memo

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

1min

MENU OK

Rec.Mode

Memory

Sleep Timeout

Auto Power Off

Exit

Reset

Off

Quick Delete

Quick Enlargement

Set-up

3min

(3/3)

Once

e06KB335_33e.qk 6/6/02 4:40 PM Page 120 (1,1)

123

Editing Images/Settings

How to recall the [Set-up] menu

Resetting to Default Settings (Reset)

You can reset all the settings other than the date and time, lan-

guage, Home Time, alarm and date style.

zSelect [Reset] on the [Set-up] menu.

xPress the four-way controller button

().

The Reset screen will be displayed.

cUse the four-way controller ( ) to

select [Reset].

vPress the Playback/OK button.

The camera is ready to capture or play back images.

122

Editing Images/Settings

2048×1536

MENU OK

Rec.Mode

Memory

Set-up

Recorded Pixels

Quality Level

White Balance

Multiple

Exit

Focusing Area

Digital Zoom

AWB

(1/3)

Menu button

Playback/OK button

Four-way controller

MENU OK

Exit

Reset

Reset all camera settings

to defaults?

Cancel

Reset

MENU OK

Memory

Off

Exit

Beep

Copy Image

Resize

Trimming

Alarm

Rec.Mode

Set-up

(1/3)

Format

Twice

1min

MENU OK

Rec.Mode

Memory

Sleep Timeout

Auto Power Off

Exit

Reset

Off

Quick Delete

Quick Enlargement

Set-up

3min

(3/3)

Once

e06KB335_33e.qk 6/6/02 4:40 PM Page 122 (1,1)

125

Appendix

Messages

Messages such as the following may be displayed on the LCD monitor

during camera operation.

124

Appendix

List of City Names

Refer to the following list of city and code names for setting the world time.

Code City Names Code City Names

PPG Pagopago THR Tehran

HNL Honolulu DXB Dubai

ANC Anchorage KHI Karachi

YVR Vancouver KBL Kabul

SFO San Francisco MLE Male

LAX Los Angeles DEL Delhi

YYC Calgary CMB Colombo

DEN Denver KTM Kathmandu

MEX Mexico City DAC Dacca

CHI Chicago RGN Rangoon

MIA Miami BKK Bangkok

YTO Toronto KUL Kuala Lumpur

NYC New York VTE Vientiane

SCL San Diego SIN Singapore

CCS Caracas PNH Phnom Penh

YHZ Halifax SGN Ho Chi Minh

BUE Buenos Aires JKT Jakarta

SAO Sao Paulo HKG Hong Kong

RIO Rio de Janeiro PER Perth

MAD Madrid BJS Beijing

LON London SHA Shanghai

PAR Paris MNL Manila

MIL Milan TPE Taipei

ROM Rome SEL Seoul

BER Berlin ADL Adelaide

JNB Johannesburg TYO Tokyo

IST Istanbul GUM Guam

CAI Cairo SYD Sydney

JRS Jerusalem NOU Noumea

MOW Moscow WLG Wellington

JED Jeddah AKL Auckland

Compression error

Memory card full

Built-in Memory Full

No image

Camera can not display this

image.

This image is protected.

Battery depleted.

Battery depleted, the image

is not stored.

Memory card error.

Compression of the image you captured

has failed. Change the recorded pixels or

quality levels, and take a picture again.

The memory card is full and no more

images can be saved. Insert a new CF card

or delete unwanted images. (p.14, p.81)

Change the quality/size and try again.

(p.63, p.64)

The built-in memory is full and no more

images can be saved. Delete unwanted

images. (p.81)

Change the quality/size and try again.

(p.63, p.64)

There are no images in the camera.

You are trying to play back an image in a

format not supported by this camera. You

may be able to display it on another brand

of camera or PC.

The image you are trying to delete is a pro-

tected image. (p.83)

The battery is exhausted. Charge the battery

or replace with a charged battery. (p.10, p.11)

The battery is exhausted. The image you just

captured has not been saved. Charge the bat-

tery or replace with a charged battery. (p.10,

p.11)

Shooting and playback are impossible due

to a problem with the CF card. Try display-

ing on a PC.

e07KB335_33e.qk 6/6/02 4:29 PM Page 124 (1,1)

127

Appendix

Troubleshooting

Problem

Power will not

come on

No image on

the LCD monitor

Shutter will not

release

Cause

Battery is not installed

CF card cover is open

Battery is installed

incorrectly

Battery power is low

LCD monitor is set to

OFF

Image is displayed but

is hard to see

Camera is set to

Playback mode

Flash is charging

No available space in

built-in memory or on

CF card

Recording

Remedy

Check battery is installed. If

not, install battery.

Close CF card cover.

Check orientation of battery.

Reinsert the battery with the

label towards back of camera.

(p.11)

Insert charged battery or use

the AC adapter.

Press Display button to turn

LCD monitor on. (p.34, p.79)

Image on LCD monitor may

be hard to see when taking

pictures outside in sunlight.

Press the Playback/OK button

or the shutter release button

halfway to set the camera to

Capture mode.

When flash lamp blinks red,

flash is charging and no pic-

tures can be taken. Lamp

lights red when charging is

completed.

Insert CF card with available

space or delete unwanted

images. (p.14, p.81)

Wait until recording is fin-

ished.

126

Appendix

This card is not formatted.

Image recording...

DPOF settings recording

Movie recording...

(Un)Protecting...

Formatting...

Deleting

Alarm was set.

Image folder could not be

created.

Memory card full. Cannot

Copy.

Built-in Memory Full.

Cannot Copy.

The card you have inserted is unformatted

or has been formatted on a PC or other

device. (p.112)

The image is being recorded.

The DPOF settings are being recorded on

the CF card.

The movie picture is being recorded.

The image is being protected or unprotect-

ed.

The built-in memory or CF card is being for-

matted.

The image is being deleted.

The alarm has been enabled.

The largest file number is assigned to an

image and no more images can be saved.

Insert a new CF card or format the CF

card. (p.112)

The CF card memory is full. No more

images can be copied. Set a new CF card,

or delete unnecessary images (p.14, p.81).

More images may be saved if you change

the quality or record size (p.63, p.64).

The built-in memory is full. No more images

can be copied. Delete unnecessary images

(p.81).

More images may be saved if you change

the quality or record size (p.63, p.64).

e07KB335_33e.qk 6/6/02 4:29 PM Page 126 (1,1)

129

Appendix

Problem

Picture is dark

Flash does not

fire

Images cannot

be recorded in

the built-in

memory, or

images record-

ed in the built-in

memory cannot

be played back.

Cause

Subject is too far away

Background is dark

Flash mode is set to

Off

The Capture mode is

set to ,continuous

shooting, or Infinity-

landscape mode.

The CF card is

installed.

Remedy

Picture becomes dark if sub-

ject is too far away. Take pic-

ture within range of flash.

When taking a picture of a

person against dark back-

ground, such as night scene,

the person may appear dark if

the flash does not reach

background even with correct

exposure. Set to mode to

ensure both person and back-

ground are clear. (p.38)

Set to Auto or . (p.35, p.62)

Flash will not fire in these

modes.

If the CF card is installed, all

images will be recorded on

the CF card. Also, in the

Playback mode, only images

recorded on the CF card can

be played back.

To record images in the built-

in memory or to playback

images recorded in the built-in

memory, the CF card must

first be removed.

128

Appendix

Problem

Subject is not in

focus

Subject is not

clear in

viewfinder

Cause

Subject difficult to focus

Subject is not in focus-

ing area

Subject is too close

Focus mode is set on

manual

Diopter is not correctly

adjusted

Remedy

Subjects difficult to focus on

using autofocus: objects with

little contrast (blue sky, white

walls, etc.), dark objects, fine-

ly patterned objects, fast-

moving objects, scenery

through window or net, etc.

Lock focus on another object

located at same distance

(press shutter release button

halfway), then aim at target

and press shutter release

button fully.

Position subject in square

frame (focusing area) in mid-

dle of LCD monitor. If the

subject is outside the focus-

ing area, aim the camera at

the subject and lock focus

(press shutter release button

halfway), then compose pic-

ture and press the shutter

release button fully.

Set focus mode on . (p.58)

Normal pictures will be out of

focus if taken with focus

mode set on .

If using manual focus, adjust

focus using four-way con-

troller ( ). (p.59).

Camera viewfinder is not cor-

rectly adjusted for optimum

clarity. Adjust with diopter

adjustment lever. (p.57).

e07KB335_33e.qk 6/6/02 4:29 PM Page 128 (1,1)

131

Appendix

130

Appendix

Exposure Control

Metering System TTL metering. Choice of Multi-segment metering, Center-

weighted metering and Spot metering.

Exposure Modes Standard, Night Scene, Metered Manual, Movie, Multiple

Exposure.

Exposure Compensation

±2 EV (1/3 steps).

Movie Shooting time: approx. 1 sec. - 30 sec.

Shutter Programmed AE electronic lens shutter with CCD electronic

shutter.

Shutter speed: approx. 1/2000 sec. to 4 sec.

Drive Modes One shot, Continuous, Self-timer, Remote control and

Interval.

Flash Built-in series-control auto flash.

Automatic discharge under low lighting condition in auto modes.

Flash-on and flash-off modes. “Red-eye” reduction function

employs a single discharge.

White Balance Auto, Daylight, Shade, Tungsten Light, Fluorescent Light and

Manual setting.

Optical Viewfinder Actual-image zoom viewfinder with diopter adjustment from -

3 m-1 to +1 m-1.

LCD Monitor 1.6 inch. TFT color LCD. Field of view: 100%

LCD Functions Nine-image and 1x – 4x magnification available in Playback

mode.

Number of recordable images

Approx. 250 (with the flash fired for 50 % of the shots. LCD

monitor ON)

*In accordance with Pentax photographic conditions.

Interfaces USB terminal and DC input terminal.

Power Sources Lithium-ion (rechargeable) battery allows approx. 250 shots

(with the flash fired for 50% of the shots and LCD monitor

ON) to be taken with one charge*.

Optional AC adapter is also available.

*According to tests conducted in-house by Pentax.

Maximum charge takes approximately 120 minutes.

Dimensions 92 (W) ×59 (H) ×32 (D) mm (D: max 34.5 mm)

(3.6 ×2.3 ×1.3/1.4 inches).

Weight 200 g (7.1 oz.) without battery and CF card.

235 g (8.3 oz.) including battery and CF card.

Main Specifications

Type Compact-type digital still camera with built-in zoom lens,

autofocus, auto exposure and auto flash.

Effective pixels 4.0 megapixel (430RS), 3.2 megapixel (330RS)

Sensor

Total pixels – 4.13 megapixel (Optio 430RS), 3.34 megapixel

(Optio 330RS)

1/1.8 inch interline transfer CCD with a primary color filter.

Color Depth 10 bit ×3 colors.

Recorded Pixels

Still –

2304 ×1712 pixels (430RS), 2240 ×1680 pixels (430RS),

2048 ×1536 pixels (330RS), 1600 ×1200 pixels,

1024 ×768 pixels, 640 ×4800 pixels

Movie

– 320

×240 pixels.

Sensitivity Auto, fixed (equivalent to ISO 100, 200 (430RS); ISO 125,

250 (330RS)).

File Formats Still – JPEG (Exif 2.2), DCF, DPOF.

Movie – AVI (Open DML Motion JPEG), 15fps.

Quality Levels “Good”, “Better”, “Best”.

Storage Media Built-in memory (approx. 11MB),

CompactFlash (CF) card Type I

Lens Pentax power zoom 7.6 mm - 22.8 mm (Equivalent to

37.5mm - 112.5 mm in 35 mm format) F2.6 - F4.8,

7 elements in 6 groups (2 dual-sided aspherical elements).

Digital Zoom 1×– 2×.

Focusing System

Type TTL contrast detection autofocus system.

Manual focus / Infinity-landscape mode available.

Focusing Areas 7-point autofocus and spot.

Focusing Range Autofocus: Normal 0.4 m (1.31 ft) to infinity.

Macro 0.14 m (0.46 ft) to 0.5 m (1.64 ft).

Manual focus:

0.14 m (0.46 ft) to infinity.

e07KB335_33e.qk 6/6/02 4:29 PM Page 130 (1,1)

133

Appendix

WARRANTY POLICY

All Pentax cameras purchased through authorized bona fide photographic

distribution channels are guaranteed against defects of material or workman-

ship for a period of twelve months from date of purchase. Service will be ren-

dered, and defective parts will be replaced without cost to you within that

period, provided the equipment does not show evidence of impact, sand or

liquid damage, mishandling, tampering, battery or chemical corrosion, opera-

tion contrary to operating instructions, or modification by an unauthorized

repair shop. The manufacturer or its authorized representatives shall not be

liable for any repair or alterations except those made with its written consent

and shall not be liable for damages from delay or loss of use or from other

indirect or consequential damages of any kind, whether caused by defective

material or workmanship or otherwise; and it is expressly agreed that the lia-

bility of the manufacturer or its representatives under all guarantees or war-

ranties, whether expressed or implied, is strictly limited to the replacement of

parts as hereinbefore provided. No refunds will be made on repairs by non-

authorized Pentax service facilities.

Procedure During 12-month Warranty Period

Any Pentax which proves defective during the 12-month warranty period

should be returned to the dealer from whom you purchased the equipment or

to the manufacturer. If there is no representatives of the manufacturer in your

country, send the equipment to the manufacturer, with postage prepaid. In

this case, it will take a considerable length of time before the equipment can

be returned to you owing to the complicated customs procedures required. If

the equipment is covered by warranty, repairs will be made and parts

replaced free of charge, and the equipment will be returned to you upon com-

pletion of servicing. If the equipment is not covered by warranty, regular

charges of the manufacturer or of its representatives will apply. Shipping

charges are to be borne by the owner. If your Pentax was purchased outside

of the country where you wish to have it serviced during the warranty period,

regular handling and servicing fees may be charged by the manufacturer’s

representatives in that country. Notwithstanding this, your Pentax returned to

the manufacturer will be serviced free of charge according to this procedure

and warranty policy. In any case, however, shipping charges and customs

clearance fees to be borne by the sender. To prove the date of your purchase

when required, please keep the receipt or bills covering the purchase of your

equipment for at least a year. Before sending your equipment for servicing,

please make sure that you are sending it to the manufacturer’s authorized

representatives or their approved repair shops, unless you are sending it

directly to the manufacturer. Always obtain a quotation for the service charge,

and only after you accept the quoted service charge, instruct the service sta-

tion to proceed with the servicing.

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from Pentax distributors in some

countries can supersede this warranty policy. Therefore, we recommend

that you review the warranty card supplied with your product at the time

of purchase, or contact the PENTAX distributor in your country for more

information and to receive a copy of the warranty policy.

132

Appendix

Optional Accessories

A number of dedicated accessories are available for this camera.

• AC adapter (D-AC2)

• Battery Charger (D-BC2)

• AC Plug Cord

D-CO2A Australia

D-CO2B United Kingdom

D-CO2E Europe

D-CO2H Hong Kong

D-CO2J Japan

D-CO2K Korea

D-CO2U North America, Canada

• Rechargeable lithium ion battery D-LI2

• Remote control F

• Remote control E

• USB Cable (I-USB6)

• Strap (O-ST5)

• Camera case (O-CC2)

• Waterproof case (O-WP1)

e07KB335_33e.qk 6/6/02 4:29 PM Page 132 (1,1)

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: Pentax Corporation

Located at: 35 Inverness Drive East

Englewood, Colorado 80112 USA

Phone: 303-799-8000 Fax: 303-790-1131

Declare under sole responsibility that the product iden-

tified herein, complies with 47CFR Parts 2 and 15 of

the FCC rules as a Class B digital device. Each prod-

uct marketed, is identical to the representative unit

tested and found to be compliant with the standards.

Records maintained continue to reflect the equipment

being produced can be expected to be within the vari-

ation accepted, due to quantity production and testing

on the statistical basis as required by 47CFR §2.909.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired oper-

ation. The above named party is responsible for ensur-

ing that the equipment complies with the standards of

47CFR §15.101 to §15.109.

Product Name: PENT

AX Digital Still Camera

Model Number: Optio 430RS/330RS

Contact person: Customer Service Manager

Date and Place: June, 2002, Colorado

134

Appendix

For customers in the USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for com-

pliance could void the user’s authority to operate the equipment.

This equipment has been tested and found comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radi-

ate frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

For customers in Canada

This Class B digital apparatus meets all requirements of

the Canadian Interference - Causing Equipment Regulations.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

The CE Mark is a Directive conformity mark of the European

Community.

e07KB335_33e.qk 6/6/02 4:29 PM Page 134 (1,1)

57219 01-200204 Printed in Japan

Asahi Optical Co., Ltd. 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639,

JAPAN

(http://www.pentax.co.jp)

Pentax GmbH (European Headquarters)

Julius-Vosseler-Strasse 104, 22527 Hamburg,

GERMANY

(HQ - http://www.pentaxeurope.com)

(Germany - http://www.pentax.de)

Pentax U.K. Limited Pentax House, Heron drive, Langley, Slough, Berks

SL3 8PN, U.K.

(http://www.pentax.co.uk)

Pentax France S.A. 12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex,

FRANCE

Pentax Benelux B.V. (for Netherlands)

Spinveld 25, 4815 HR Breda, NETHERLANDS

(http://www.pentax.nl)

(for Belgium & Luxembourg)

Weiveldlaan 3-5, 1930 Zaventem, BELGIUM

(http://www.pentax.be)

Pentax (Schweiz) AG Widenholzstrasse 1 Postfach 367 8305 Dietlikon,

SWITZERLAND (http://www.pentax.ch)

Pentax Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN

(http://www.pentax.se)

Pentax Corporation 35 Inverness Drive East, Englewood, Colorado 80112,

U.S.A.

(http://www.pentax.com)

Pentax Canada Inc. 3131 Universal Drive, Mississauga, Ontario L4X 2E5,

CANADA

(http://www.pentaxcanada.ca)

http://www.digital.pentax.co.jp

• Printed on recycled paper

• Specifications and external dimensions are subject to change without notice.

e07KB335_33e.qk 6/6/02 4:29 PM Page 136 (1,1)

Pentax Optio 430Rs Users Manual E01KB335_33e.qk

430RS to the manual acb3cd1b-3aef-4461-9291-658960db611c

Navigation menu

Versions of this User Manual:

Views

Navigation