Perfect Tech Co 50X BT-50X User Manual
Perfect Tech Co ., Ltd BT-50X
user manual
BT-501
BT-501
BT-501
Car Kit
Car Kit
Car Kit
Car Kit
Car Kit
Car Kit
Car Kit
Car Kit
Car Kit
BT-501
BT-501
BT-501
BT-501
BT-501
BT-501
BT-Headsetfree
D- ANSWER
AND END
BUTTON
POWER JACK
A- VOLUME (+)
MUTE OFF
B- VOLUME(-)
MUTE ON
C- POWER
ASSOCIATION
LED
EARPIECES
BT-501
BT-501
Car Kit
Car Kit
BT-501
BT-501
BT-501
BT-501
Car Kit
Car Kit
Car Kit
Car Kit
Press the C button twice.
Press the D button once.
During a conversation, press the B button for
3 seconds to activate "Mute" mode. To
deactivate it, press for 3 seconds the A
button.
Car Kit
Car Kit
Mute function
BT-501.
Car Kit
The fully charged battery has power for to
8 hours of talktime, up to hours of 120
standbtime. However, the times may vary
when used with different mobile phones or
other compatible Bluetooth devices, usag
settings, usage styles, and environments.
Leaving the device in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the capacity
and lifetime of the battery. Always try to
keep the battery between 15 C and 25 C
(59 F and 77 F). A device with hot or cold
battery may not work temporarily, even
when the battery is fully charged. Battery
performance is particularly limited in
temperatures well below freezing.
Car Kit
Do not use the device during charging.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.