Perfect Tech Co 808X BT808X User Manual A5FEADB6B6C7AF75A643A64C

Download:
Mirror Download [FCC.gov]
Document ID	888929
Application ID	Pg/uyidxnWuk9fq5tOQ8dQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.12kB (951544 bits)
Date Submitted	2008-01-15 00:00:00
Date Available	2008-01-15 00:00:00
Creation Date	2007-12-25 14:39:16
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-12-25 14:39:16
Document Title
Document Creator	PScript5.dll Version 5.2.2
Document Author:	eva_kao

Thank ou tor choosin the BT—BOB
Bluetoot earfiiece. Before usII'rg itfor the first
e instructions prrnted below.
time, follow t
Multifunction
buttom
Volume -
Power Jack Volume +
CHARGING THE BATTERY OF THE EARPIECE
The firsttime you use the ear ieoe the battery
inside may not be charge and it will be
necessary to charge it up.
Recharge. Connect the battery recharger to
the electric socket and to the earpiece. The
red light will come on and the recharging
processwill begin. When the battery has been
recharged the light will go off. It will take
about two hours to fully recharge the battery.
Battery dead. When the BT7808 battery has
almost run down, the light will flash red and a
beep will be heard in the earpiece.
NOTE: to extend the life of the battle , we
recommend that u leave the B 7808
switched off whi recharging and only
recharge it when it is dead. Ifthe BT-SOS has
notbeen used for some time, it maytake
a few minutes for the red light to come on.
Status LED
Stand-by Hashing BLUE
"find me" made Hashing RED/BLUE
Calling Duidr flashing BLUE
Battery dead Slow flashing BED
Recharge Fixed RED
BT-808
SWITCHING ON, CONNECTTNG AND
SWITCHING OFF THE EARPIECE
Switching on.
Press the multifunction button and keep it
ressed until the blue Iigért flashes three times
gogtbgsecends). The T-808 will switch to
n .
Connecting. After switching on the BT—808,
briefly press the multifunction button to
connect the earpiece to the last device with
which it has been associated (only after
makrng the assocratron).
Switching off. Press the multifunction button
and keep it pressed until the red light flashes
three times (about 3 seconds).
ASSOCIATION OF THE EARPIECE WITH A
BLUEI'OOTH DEVICE
Before using the Bluetooth headset, you must
associate it with the device you are going to
use it with (telephone/PC).
ASSOCIATION
- Ensure that the [ET-808 rs swrtchedofl. Press
the-multrfunctron button and kee rt pressed
until the light starts flashing re Iue (about
4-6 seconds),_ m the way the earpiece is
ready to be prcked up by other devrces
(“find me" mode).
oRun the search for new Bluetooth
accessories from your device (phone/PC)‘.
At the end of the search the name of our
earpiece will appear on the disp (the
name may vary from device to device .
-Select the BT-Headset and, when
requested to do so, enter the PIN 1234,
then press “OK".
-The phone/PC will tell you that the new
bluetooth device has been associated, while
the BT7808 light will flash blue (stand-by).
NOTE:With some phones. it might be
necessary to authorrse connectlon
from the phone.
‘To make the association, follow the
instructions in the user manual supplied
with the phone or with the PC Bluetooth
interiaoe.1'he BT—808will slry in‘h'mfme'
mode for e maximum ottwo minutes. Ifthe
aeooltllon Is not completed within this
time, the supine will melt eutormt'nelly
to stew-bx
USING 11-IE BT-BOSWITH MOBILE PHONES
Attereesoo'ntim our earpiece with e phone it
son he used to manage oeile with the venous
funet'nns supported.
AITEtITION: the possibility to use all the
funmone ofour eerpnoe depends emiuervely
on the functions supported the phone In
use (e. _.: rithe phone does n so ort you
“list is function Will not be ever Ie).
Aosnerir'tlloalle. When you receive a ed. the
BT-BOB themne [orthe mushd notes
depend'm on phone in the tea-piers. Briefly
press the multifunction umn In enswer.
Endin sells. Durin a cell. it ' rose the
muIIthIInctIon btntonuto end dimmrpersetlon.
Refusing a cell. When you reoeive aoell, wait
to hear the tune. then press the 'Vol'ume+"
button and the "Vo!rrme-" button
slmulhneously for 3 seconds (youwlll hmr a
beep "It the earpieee and the call will be
relused).
Regulating the volume. During a
oonverset'nn or in mode, repeatedly
pressthe‘Voiumee-‘b ntolnereesethe
incomim volume or the Whom -" button to
lower It.
Treneterrlnopells. Using the BT-BOB it is
possibh, dune? e phone cell, to bolster the
conversation rent the serum to the
telephone and vice verse.
Ereeb Mobile phone
Pres and hold ttre ‘Mu/ufirmtron'
button for 3 seoonds. You will he! a
bee m the headset and the conversation
wrl be transferred to the phone.
Moods phone > Eerset
Press and hold the “Mufufirncoofi
button tor 3 seoonm. You Will hear a
bee In the headset and the commotion
wrl be transferred to the earpreee
Voice cells. While the earpiece is in stendhy
mode. briethr press the multiiunotion button
end. when requested to do so. pronounoe the
name of the person you wish to oell.
ATTBITIOH: to use this function the name
gist-to be vocally recorded it ttre phone book
Fleoellln the last number. Press and boil
the . -' button for 3 seconds. The
BT-BOB wrlloonneotto thetelephoneend reoell
the last number oelled.
Mute Function Durin a conversation,
press the '\ro|ume — or 2 seconds to
activate "Mute" mode. To deactivate it.
briefly press the '\/olume +” for 2
seconds.
USING THE BT—303 WITH A PC
Connection. Start the connection from the
PG. Winn you hear the tune in the heedeet.
briefly rees tho_muhttunr.1|on button to
Ieept eeenneobon.
A'ITENTION:_ it is important that the
oonneotlon re mode in this in . It the
oonnmthn Is eethrsted from tin outset It
may not be possihh to use it as an audit
penpherel in tir'e one. disconnect and repeat
the oonn n).
Lk‘tenlng to music. To use the BT—808 is en
{smile peripheral it is neenssryto prooeed as
ours.
. Enter the "(tunnel Pater.
oSeleot ‘Somobmdmoidinedls', then select
the ‘ttudb'tnlder**.
. In the "Soundflepmduofion‘seotion, select
the MAW“ peripheral".
In this I”? all the musket tiles will be
reproduce using our eerpieoe Is the
preferred listening peripheral.
“ The settings m depending on the
operating eyeteIII. my
Use with SKYPE_. After oonnuri'nn, start the
'SAype' wsIem installed to use our heatset
dunrn conversation.
A'ITENTION: it ie neoeee
oonfqured s Sleype eeoount
service.
to have
use this
Rerfillning the volume. While listening to
mu media files or during l. cameraman.
repeatedly reee the " button to
increase e ineuminq volume or the
Wme-‘buttonmlowerit.
WARNINGS
. Do not use the device during charging.
-Domt¢emosemdanp.
- Do not use solvent: or ahrasiw materials to
clean the BT-BOB.
oDonot eeetohhtementturee he
batteryrrfihtuplnde. p a
-0n use the or' inal reeha su lied in
nu u w w
- Do not dismarrth either the etpieoe or the
battery recharyer.
- It the earpieee it not going to be used for
some tlme. we recommend that you
reelflrgethe battery and store everything in
a cool. dry pine.
- Kee the product out otthe reach ofchildren
(oe n small parts could be mallwred).
- The fully charged battery has power
for up 0 12 hours of talkume, up
to hours of_ 120 standby tlme.
However, the btlmes may vary when
used Wlth dlfferent,mob|le phones
or . other compatible Bluetooth
deV|ces._usage settlngs. usage styles.
and enmronments.
PIN: 1234
°Lefllng the devlpe In hot or cold
plaues,sue|1 an a closed oer in
summer or Winter oondmorel, vnll
new“ new” “tune
battery between 15° and 25°G
59“Fand77°F.Adevloevnlha
at or pold may not work
Etm’tltumlm “tom" *‘
c . pe rmnnea e
pexwlarw Ilmlted In temperatures
mil below trump.
Federal Communications C ommi ssi on (F C C) Statement
1 5 21
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
1 5.1 05 (b)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 1 5 ofthe FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the useris encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radiof'TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:12:25 14:39:16+08:00
Create Date                     : 2007:12:25 14:39:16+08:00
Format                          : application/pdf
Title                           : 
Creator                         : eva_kao
Document ID                     : uuid:4cb43f2b-ea42-415d-82f4-d01c5dbd09ef
Instance ID                     : uuid:719a2c71-fe33-497e-a48c-26085d3ea91a
Page Count                      : 5
Author                          : eva_kao

EXIF Metadata provided by EXIF.tools