Performance Designed PL6432BR RockCandy PS3 Wireless Dongle User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2627336
Application ID	Kho3DBlbnf5O3qgDrqfkkA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.11kB (38844 bits)
Date Submitted	2015-05-28 00:00:00
Date Available	2015-05-29 00:00:00
Creation Date	2015-05-24 19:25:45
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-05-24 19:25:45
Document Title	Microsoft Word - PL6432-WirelessController Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Thank you for purchasing wireless controller for the PLAYSTATION 3 video game
system.
RockCandy PS3 Wireless Controller model˖PL-6432BT
RockCandy PS3 Wireless Dongle model˖PL-6432BR
Contents:
1 Wireless Controller for PS3
1 USB Dongle (found attached to the controller)
1 Manual
Set up:
1) Remove the USB receiver that is attached to the bottom of the controller and plug it
into one of the free ports of your PLAYSTATION 3
2) USB receiver LED will flash rapidly while looking for positive connection with the
controller. USB receiver light will light up solid when the connection is established
3) Place the power switch is in “ON” position
4) Press the “HOME” button, the controller will be automatically assigned a player
number. (you can change the controller player number by pressing and holding the
HOME button and then changing the player number from the PS3 menu – refer to
your console manual for more information
5) The battery of the controller is low when its LED start flashing.
Power Save Mode:
Controller will go into Power Save Mode after 3 (three) minutes of inactivity. You need
to press the START button to turn it back to the ACTIVE mode
Important Notice
1. Recommended user age range 14+.
2. Adult supervision is necessary when controller is used by child
CAUTION:
Changes or modifications to this equipment not expressly approved by the manufacturer
could void the users authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Controller FCC ID: X5B-PL6432BT; IC: 8814A-PL6432BT
Dongle FCC ID: X5B-PL6432BR;
IC: 8814A-PL6423BR
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada's
licence-exemptRSS
RSSs.
Canada licence-exempt
standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet
appareil
est conforme
aux CNR
exemptes
licence
© 2010
Performance
Designed
Products
LLC.deAll
rightsd'Industrie
reserved. Canada
PDP and. Son
fonctionnement
est are
soumis
aux deux
suivantes
: Products LLC. PlayStation
AFTERGLOW™
trademarks
of conditions
Performance
Designed
registeredne
trademark
of Sony
Computer ;Entertainment,
Inc. This product is not
(3®
1 )isCea dispositif
peut causer
d'interférences
et
manufactured,
sponsored
endorsed by
Computer
Entertainment.
(designed,
2 ) Ce dispositif
doit accepter
touteorinterférence
, ySony
compris
les interférences
qui peuvent
causer un mauvais fonctionnement de l'appareil.
Please keep this information for future reference.
© 2010 Performance Designed Products LLC. All rights reserved. PDP and
AFTERGLOW™ are trademarks of Performance Designed Products LLC. PlayStation
3® is a registered trademark of Sony Computer Entertainment, Inc. This product is not
designed, manufactured, sponsored or endorsed by Sony Computer Entertainment.
Please keep this information for future reference.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2015:05:24 19:25:45+08:00
Modify Date                     : 2015:05:24 19:25:45+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - PL6432-WirelessController Manual.doc
Creator                         : Administrator
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:82c3891d-2daf-4405-bd0e-0bdc7323df6d
Instance ID                     : uuid:c09d7d06-ba13-4725-917b-97573d060672
Page Count                      : 2

EXIF Metadata provided by EXIF.tools