Phaeton Nice Electronic High tech P1013 PU CASE WITH KEYBOARD User Manual

Shenzhen Phaeton Nice Electronic High-tech Co. Ltd. PU CASE WITH KEYBOARD Users Manual

Users Manual

Download: Phaeton Nice Electronic High tech P1013 PU CASE WITH KEYBOARD User Manual
Mirror Download [FCC.gov]Phaeton Nice Electronic High tech P1013 PU CASE WITH KEYBOARD User Manual
Document ID1434463
Application IDGezssCVGvtIJfxfEWeV2Fw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize368.72kB (4608947 bits)
Date Submitted2011-03-21 00:00:00
Date Available2011-03-21 00:00:00
Creation Date2011-03-17 10:23:38
Producing SoftwareAdobe Acrobat 7.1 Image Conversion Plug-in
Document Lastmod2011-03-17 10:23:38
Document TitleUsers Manual
Document CreatorAdobe Acrobat 7.1

Bluetooth Keyboard Manual
Packing Include:
1,A Bluetooth keyboard
2, AiPAD bag ( optional part)
3,A list of manual
4,USB charging cable (if “Apple" 30 PIN
charging interface don’t need)
8, sleeping current: <200UA
9. charging currentz> 100MA
10, standby time: 100days
11, Theory of working Time: 25 days
12, uninterrupted working time: 90 hours
13, charging time. 4-4.5 hours
14, Li-ion battery Capacity: Minimum 430MAH
15, lithium battery life: 3 years
16, lithium batten/ Specifications: 4.5 " 24 ' 47MM
17, key strength: 80 3: 10g
18, key life: 500 million
19, operating temperature: -20 - +55 (j
20, Storage temperature: -40 - +70 (7
Note: When you switch on the keyboard, the power light and
Bluetooth light will be on in three seconds , at this time the keyboard
do not connnect with any device.,But the LED light will automatically
be off if the keyboard still do not connected to any device after the
Led keep lighting for 5 seconds. The keyboard can connect when
you switch on after your first successfully use ,the power light will
keep lighting ,but the bluetooth light will be off after it successfully
connect to device .
Charging interface
Connect button 7, G,
Bluetooth indicator light
Power indicator light
zhargl Dimer
Charging |ndicator light
Power Switch
§
(5 a
left i "ll elli all" elm? ‘l'flll all trill-:llli-zulau
Elmllfllfllfllfl _ fill it His lllil
ilmllfeu lllw llll‘ ll“ lll‘ lill? llLlll‘Llll" ll: ll: l
l? ll“ lll‘_llll° ll" llallilUl: ‘
QUlfltluuuu Quiet
fififllwl ,, , mmfilfll
‘ l
Bluetooth Keyboard
if?)
Install Bluetooth Keyboard
1, How to install bluetooth keyboard into IPAD
Step 1: Find
(1), as shown, Turn on the toggle switch ,power light and Bluetooth
light will be on in 3 seconds , But after keep lighting for 5 seconds
, it will be off .At this time the keyboard is in working situation .
(2),Press the connect button ,the Bluetooth light will be flashing ,
Power light will be lighting ,so the keyboard is in connecting
situation .
Connect button
PowerSwltch
lLi‘l
\/
Product Features:
1, With Broadcom2042 as main control chip , with Bluetooth 2.0
interface .
2. Use industry~leading Bluetooth solution. WIDCOMM BTW
Bluetooth software which is specified software by Microsoft official.
3, Specially design for IPAD, It will be more convenient to carry with
lPAD bag .
4, Buit-in power management software, It can automatically show
the available capacity in the Microsoft Windows
5, Silence design. It will not affect other people's rest
6,It is waterproof ,dustproof, anti~pollution, anti-acid, waterproof for
silicone part
7, work with PC and commerical mobile, It will be convenient to work
8, working temperaturer :-20 C65 C humidity:20%-50%
9.buiIt-in lithium battery. you do not need to frequently change
battery
Specifications
1. executive standard: Bluetooth V2.0
2. Working distance: 10 meters
3. modulation system: FHSS 2.4G
4. transmitting power: Class 2
5. operating voltage: 3.06.0
6, work current: <5.0MA
7, standby current: 2.5MA
(37
(3) Click setting of the screen of the lpad .lpad will in setting area
, then choose Bluetooth . open the bluetooth .. lpad is in searching
bluetooth keyboard working situation .
Click setting in lpad cnek in open the Bluetooth
Step 2: Enter the password and connect
“m—fl _ .,
::_ m -
n._.__
a-
e..
c-
i- .
i '
n.-
gfi w
lpad is In searching situation. search for bluetooth keyboard and remind
It can search bluetoolh keyboard to enter password in ma bluelooth keyboard
1?
Note There will not have any prompt , just click enter after your enter
passwork in the load screen ..It will be connected successfully.
Step 3: Connect successfully , The keyboard is in working situation
Connect successfully
the keyboard ls in working situation
Power light will keep lighting after it connect successfully . so the
keyboard can work with IPAD successfully .The lighting power light
to remind that you should turn off the keyboard when you do not use
it .
Charge
The power light keep flashing in yourworking .the keyboard is short
of power . It is time to charge the keyboard ,
(1) Before you install your Bluetooth Keyboard, please make sure
you have done the Bluetooth Dongle installation procedure, and the
Bluetooth facility is turned on.
(2) Press and release the connect button on the bottom of Bluetooth
Keyboard. The red led light will change into a flashing mode.
(3) Make sure that the keyboard is within the effective range-—-10M.
(4) Make sure that there's no change of the Bluetooth facility. If
anything changed, please kindly rematch.
(5) If your Bluetooth facility is connected to other Bluetooth
products. please kindly confirm that the speed of the Bluetooth
facility is enough
(6) Please kindly check the batteries. If they are short of power,
replace them for new ones.
(7) Please make sure that your Bluetooth Dongle is damaged or not .
2. Every time you turn off the keyboard power and after turn on it or
reboot the computer shuts down , if it is no response
(1)After the keyboard and the computer power, re-install back, the
keyboard and the computer needs to re-invent code, which may
take 23 seconds of your time, if you shut down and then boot, or
keyboard, disconnect the power re-opened, please you press any
key on the keyboard, and then wait three seconds, your keyboard
can be property used.
TIPS: When your battery is low, low-voltage lights on the keyboard
will blink, and you should give your keyboard charging, so as not to
affect your work.
Charging procedure as follows
(1) i Use the IPAD charger/USE charging cable plug into outlet.
put one end of the plug into keyboard USB charging cable, as
follows.
criar iii
indict?" 9 @
Charging interface
(2) Now red indictor, after charging finish, red indictor off.(charging
time: 45 hours.)
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device.
Pursuant to Pan 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can
radiate radio frequency energy and, if no installed and used in
accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
oReorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that
to which the receiver is connected
oConsuIt the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subiect to the following two conditions (1)This device may not cause
harmful interference. and (2) this device must accept any interference
received. including interference that may cause undesired operation.
FCC Caution: Any change or modifications no expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
Storage
(1) When you are finished using your keyboard or you will be
required after the keyboard to carry . so don't forget to set aside the
keyboard to switch the source OFF, turn off the keyboards power to
extend battery life
(2)When you need a long time storage your keyboard, please don't
forget to pack the battery power, about half of the filling , then store
your keyboard, so can make your keyboard lithium life longer.
Note: When you normally using the keyboard, or if you are not using
the keyboard and didn‘t turn off the power switch, please don‘t fold or
curly , so you will have been working at the keyboard, it will greatly
decrease you using the keyboard.
Attentions:
1.Keep away from sharp objects.
2.Do not put heavy object on keyboard too long.
3.Do not heating it in microwave oven,
4.Don't force tensile or distortion
5.Keep away from oil or any other organic liquid.
6.Do not press the keyboard when it is in folding state.
7.Can wash silicone parts by water, alcohol, or alcohol disinfectant.
FAQ:
1. If unable to connect the Bluetooth Keyboard to the computer, or
the Keyboard work unconventionally, please try the steps below:
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
1. This equipment complies with FCC radiation exposure limits ser
forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure
compliance.
2. This transmitter must not be co-Iocated or operating in conjunction
with any other antenna or transmitter.
Important tip: After your keyboard connected with computer or iPAD,
if you have 15 minutes not use it, then it will enter into dormant state,
and at this moment the light of keyboard power crush out. If appear
dormant state phenomenon, pls don’t think your keyboard is broken,
you lust press the key and wait 3 seconds, your keyboard will put
right.
CEFCC) wee
MADE IN CHINA

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:03:17 10:23:38+08:00
Create Date                     : 2011:03:17 10:23:38+08:00
Metadata Date                   : 2011:03:17 10:23:38+08:00
Creator Tool                    : Adobe Acrobat 7.1
Format                          : application/pdf
Document ID                     : uuid:0ebbfc02-b195-4454-8f6c-8ade6095b9a5
Instance ID                     : uuid:8e49be53-158e-43c2-817a-2ac0ca309687
Producer                        : Adobe Acrobat 7.1 Image Conversion Plug-in
Page Count                      : 2
Creator                         : Adobe Acrobat 7.1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZCF-P1013

Navigation menu