Phase Technology Rs600I Users Manual RS600_ 08_29
RS600i to the manual 90fd35b6-2eac-47ec-9cbe-d829ac78ad57
2015-02-06
: Phase-Technology Phase-Technology-Rs600I-Users-Manual-518421 phase-technology-rs600i-users-manual-518421 phase-technology pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
RS600i Open-Ceiling Speaker Technical Information for System Engineers Key Features Specifications: RS600i System Type Frequency Response (-3 dB)1 Low Frequency (-10 dB)1 Max. Program Power Max. Continuous Power RMS2 Max. UL Power Rating3 Max. SPL dB @ 1 M Sensitivity dB @ 1W/1M4 Impedance (nominal) Coverage Angle (-6 dB @ 2 kHz) Coverage Angle (-6 dB @ 10 kHz) Directivity Factor (Q) Directivity Index (DI) Tap Selector Mounting hardware included 6.5” Coax, open-ceiling, ported (33 Watt transformer for 25/70.7/100 Volt or voice coil/8 Ohm direct) 63 Hz - 22 kHz 45 Hz - 22 kHz 180 Watts 90 Watts 60 Watts 110.5 dB 90.5 dB 8 Ohm (nominal value) 135º 125º 3.83 (Averaged 100 Hz - 10 kHz); 6.80 @ 2 kHz 5.00 dB (Averaged 100 Hz - 10 kHz); 4.79 dB @ 2 kHz 6-Position rotary switch with voice coil/8 Ohm direct Transformer Taps 70.7 V 33 W 17 W 9W 6W 3W Output 105.5 dB 103.0 dB 100.0 dB 98.5 dB 95.5 dB Transducers Low Frequency Driver Output 105.5 dB 103.0 dB 100.0 dB 98.5 dB 25 V 5W 2.5 W 1.3 W 0.63 W Output 97.5 dB 94.5 dB 91.5 dB 88.5 dB High Frequency Driver Low Frequency Voice Coil Crossover Frequency 1 x 165 mm (6.5 in) Polypropylene cone, butyl rubber surround 25 mm (1.0 in) Convex aluminum tweeter with waveguide 25 mm (1.0 in) 3 kHz Network Type Low Pass High Pass Enclosure Material Motor Board Grille Inputs Colors Height Diameter Weight Shipping Weight 12 dB per octave, 2nd order 12 dB per octave, 2nd order Injection molded ABS, glass fiber reinforced Cast aluminum Iridite-plated steel with powder-coat finish 4 Pin, 5 mm Euroblock for individual or daisy chain connection Black or white 363.6 mm / 14.31 in 307.3 mm / 12.10 in 6.1 kG / 13.5 lbs 7.5 kG / 16.5 lbs Accessories Included Optional Packaging 1 2 3 4 100 V 33 W 17 W 9W 6W Hanging hardware, Euroblock connector & terminal weather boot Surface-Mount Bracket (AC-RS-SM6) 1 Per box Frequency response is measured in half & full space and includes a low-frequency peak > + 3 dB. Continuous power rating, EIA-426-B test. UL testing specifies band-limited pink noise over the indicated frequency spectrum. 2.83 Volts at a distance of 1 meter. SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement. © 2005 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS600 REV 08.29.05 • BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker (EASE™documented). • One 165 mm (6.5 in) polypropylene woofer and one 25 mm (1.0 in) convex aluminum tweeter with FerroFluid™ cooling mounted to a proprietary castaluminum M6™ baffle and heat sink. • Weatherized components for indoor & outdoor applications. • Includes hanging hardware with aircraft cables and integrated SpeedClamp™ self-locking cable grip for fast, easy & secure installation. Also includes Euroblock connector & terminal weather boot. • Patented ZeroReflection™ enclosure technology for optimal sound reproduction & cabinet rigidity. • Easy access 6-position selectable tap switch for 25, 70.7 and 100 Volt applications with voice coil/8 Ohm direct simplifies ordering and inventory tracking. • Iridite-plated steel grille with protective powder-coated finish for lasting durability. • 90.5 dB average sensitivity offers highoutput capabilities & reduced amplification costs. • UL 1480 rev. 5, CE (EMC Directive 89/ 366/EEC, EN55020, EN55013 & IEC529 approval pending. Milspec 810 approved. • Optional accessory: AC-RS-SM6 bracket for surface-mount applications. • High-quality black or white paint finish. Custom paint colors optional. Description The RS600i is a 6.5” 2-way speaker with an open-ceiling enclosure design that delivers effective low-end response (45 Hz) and optimal off-axis performance (up to 10 kHz, EASE™ documented). SoundTube’s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The RS600i speaker design incorporates a low-profile grille, proprietary M6™ motor-board, driver protection circuitry and a 6-position tap switch with voice coil/8 Ohm direct. Hanging hardware is included & features SpeedClamp™ self-locking cable grip for fast, easy & secure installation. RS600i Open-Ceiling Speaker Technical Information for System Engineers Frequency Response ����� �������������π� �������������π�� �� ����� ���� ���� ���� �π���������������������������������������������π�������������������������������������� ���� �� ��� �� ���� �� ��� Phase/Impedance Reponse 180.0 50.0 Ohm Impedance Phase Deg 40.0 108.0 30.0 36.0 20.0 -36.0 10.0 -108.0 0.0 20 -180.0 100 1K Beamwidth (-6dB) 10K Hz 20K Directivity Index (DI) ����� ���� ����� ����� ����� ���� ���� ���� ����� ����� ������ ����� ��� ������ ����� ������ �������� ��������� ��������� ������ ������ ������ �������� �������� �������� �������� RS600i Open-Ceiling Speaker Technical Information for System Engineers Applications Designed for indoor & outdoor background to mid-level SPL applications, the RS600i includes a single-point mounting system for rapid open-ceiling installations with an optional SM6 bracket for surface-mount applications. The broad dispersion pattern (45 Hz – 10 kHz, EASE™ documented) and high sensitivity (90.5 dB 1W/1M) make the RS600i speaker ideal for retail, restaurants, grocery stores, hotels, casinos, fitness centers, conference rooms, big box stores, museums, trade shows & airports and other open-ceiling applications. For applications where additional bass is required, SoundTube’s RS801i 8” subwoofer provides bass down to 40 Hz. BroadBeam® Wide Dispersion Technology More than 3 years in development, SoundTube’s proprietary BroadBeam® technology incorporates a high-frequency waveguide mated to a 1” convex aluminum tweeter. The BroadBeam® high-frequency waveguide delivers a consistent dispersion pattern across the upper registers of the frequency spectrum (up to 10 kHz, EASE™ documented). The result is an audio system with fewer speakers, reduced power needs, shorter installation time and cost savings on shipping & labor. Patented SoundTube Technologies SoundTube Entertainment is constantly developing new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S. & international patents, which explicitly cover SoundTube dispersion, enclosure & dome technologies. SoundTube Entertainment actively defends its patents in order to protect SoundTube resellers and end users. Technical Data and Specification Tools Technical Data SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engineers and designers. All data are available from SoundTube Entertainment or at www.soundtube.com. Data Acquisition All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASE™ data are acquired through an automated TEF 20/Outline/EASE™ interface. EASE™ Data – 3-D polar plots. SoundTubeSPEC™ – Proprietary SoundTube speaker placement software. Architectural Specifications The loudspeaker shall consist of a 165 mm (6.5 in) low-frequency transducer and a 25 mm (1.0 in) high-frequency transducer with a crossover network installed in the ported enclosure. The low-frequency voice coil diameter shall be 25 mm (1.0 in). Performance specifications of a typical production unit shall be as follows: Useable frequency response shall extend Polar Plots 125 Hz 250 Hz 500 Hz 1,000 Hz 2,000 Hz 4,000 Hz 8,000 Hz 10,000 Hz Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com RS600i Open-Ceiling Speaker Technical Information for System Engineers Mechanical Drawings from 45 Hz – 22 kHz (-10 dB, half space, no external equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 90.5 dB. The speaker shall have a nominal impedance of 8 Ohms and be available for 25, 70.7 & 100 Volt modes with voice coil/8 Ohm direct. The frequency-dividing network shall have a crossover frequency of 3 kHz with slopes of 12 dB per octave (2nd order) for both low & high pass filters. Rated power capacity shall be at least 90 Watts continuous power (RMS) and conform to EIA-426B testing. Maximum continuous output at 1 meter shall be 110.5 dB. 363.6 mm (14.31 in) 307.3 mm (12.10 in) Included Accessories Hanging Hardware: Main & Safety Cables w/ SpeedClamp™ SoundTube’s hanging cable kit incorporates hanging & safety cables & fasteners for an integrated and easy-to-install system. Hanging & safety cables are infinitely adjustable to 2.74 M (9.0 ft). Optional Accessory 463.80 mm (18.26 in) The low-frequency transducer shall have a polypropylene cone with butyl rubber surround. The high-frequency transducer shall be constructed of aluminum with a proprietary BroadBeam® waveguide. Installation for the RS600i shall be by aircraft cable affixed to the speaker chassis via a carabiner. For seismic & safety redundancy, a secondary aircraft cable shall be included and attach to the speaker chassis via #10 bolt. The external wiring input connector shall be a 4-pin, 5 mm Euroblock for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire. The system shall have a weatherresistant boot covering all wire connectors. The enclosure shall be constructed of injection-molded, mineral-filled, glass- reinforced ABS. The grille shall be constructed of iridite-plated, powder-coated steel for lasting performance in the elements. Overall cabinet dimensions shall be no more than 363.6 mm (14.31 in) in height by 307.3 mm (12.10 in) in diameter. The RS600i shall include hanging hardware, Euroblock connector & weatherresistant terminal boot. The system shall be the SoundTube RS600i with hanging hardware for both low & high impedance applications. SoundTube Entertainment 6430 North Business Park Loop Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com 346.45 mm (13.64 in) Surface-Mount Bracket (AC-RS-SM6) All SoundTube products come with a 5-year limited warranty. SoundTube Entertainment manufactures a complete line of speakers for: Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing All SoundTube products are designed and engineered in the USA.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:296811af-215a-11da-b66d-0003937236d2 Metadata Date : 2005:09:09 11:50:08-06:00 Modify Date : 2005:09:09 11:50:08-06:00 Create Date : 2005:08:29 12:01:01Z Creator Tool : Adobe InDesign CS (3.0.1) Version ID : 1 Rendition Class : proof:pdf Document ID : adobe:docid:indd:2dc2de12-1a16-11da-bc62-8bb40c34f550 Derived From Instance ID : 6682a05d-fc4c-11d9-818f-8756487790d7 Derived From Document ID : adobe:docid:indd:dcc34fa0-a100-11d9-9fc4-b8ab53164371 Derived From Version ID : 1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:32e1cfe6-ad2c-11d9-a7a7-00039359752c, uuid:8eb0c2a2-ad09-11d9-a7a7-00039359752c, uuid:b31aae0f-b376-11d9-b766-00039359752c, uuid:ac63c5ae-9fab-11d9-86cb-00039359752c, uuid:aaf1a85a-9fab-11d9-86cb-00039359752c, uuid:ab3a789a-9fab-11d9-86cb-00039359752c Manifest Reference Document ID : uuid:2418fa82-ad2c-11d9-955b-00039359752c, uuid:7e1817cf-ad09-11d9-955b-00039359752c, uuid:0c3f3f01-ad09-11d9-955b-00039359752c, uuid:ac63a64c-9fab-11d9-86cb-00039359752c, uuid:aaf19a52-9fab-11d9-86cb-00039359752c, uuid:ab3a6b59-9fab-11d9-86cb-00039359752c Format : application/pdf Title : RS600_Final 08_29.indd Tagged PDF : Yes Trapped : False Creator : Adobe InDesign CS (3.0.1) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools