Phase Technology Surface Mount Speaker Sm590I Users Manual SM590i_
SM590i to the manual 5e613a19-f5d5-466d-a2d3-8ab62d5fff8e
2015-02-06
: Phase-Technology Phase-Technology-Surface-Mount-Speaker-Sm590I-Users-Manual-518373 phase-technology-surface-mount-speaker-sm590i-users-manual-518373 phase-technology pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers Key Features Mounting hardware included Specifications: SM590i System Type 5.25” Coax, open-ceiling, ported (33 Watt transformer for 25/70.7/100 Volt or voice coil / 8 Ohm direct) Frequency Response (- 3 dB)1 Low Frequnecy (-10 dB)1 Max. Program Power Max. Continuous Power RMS2 Max. SPL dB @ 1 M Sensitivity dB @ 1W/1M3 Impedance (nominal) Coverage Angle (-6 dB @ 500 Hz) Coverage Angle (-6 dB @ 4 kHz) Directivity Factor (Q) Directivity Index (DI) Tap Selector 71 Hz - 22 kHz 61 Hz - 20 kHz 160 Watts 80 Watts 108.5 dB 89.5 dB 8 Ohm (nominal value) 166º (average) 88º (average) 5.69 (Averaged 100 Hz - 10 kHz); 5.87 @ 2 kHz 6.12 dB (Averaged 100 Hz - 10 kHz); 7.69 dB @ 2 kHz 6-Position rotary switch with voice coil direct (8 Ohm) Transformer Taps 70.7 V 33 W 17 W 9W 6W 3W 100 V 33 W 17 W 9W 6W Output 104.5 dB 102 dB 99 dB 97.5 dB 25 V 5W 2.5 W 1.3 W 0.63 W Output 96.5 dB 93.5 dB 90.5 dB 87.5 dB Transducers Low Frequency Driver High Frequency Driver Low Frequency Voice Coil Crossover Frequency 1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround 25 mm (1.0 in) Convex aluminum horn-loaded tweeter 25 mm (1.0 in) 3 kHz Network Type Low Pass High Pass Enclosure Material Motor Board Grille Inputs Colors Length Height Width (including bracket) Weight Shipping Weight N/A 12 dB per octave, 2nd order Drawn aluminum backcan with ABS baffle Cast aluminum Iridite-plated steel with powder-coat finish 4 Pin, 5 mm Euroblock for individual or daisy chain connection Black or white 305.1 mm / 12.01 in 316.9 mm / 12.48 in 216.6mm / 8.53 in 4.3 kG / 9.5 lbs 10 kG / 22.0 lbs (2 per box) Accessories Included Optional Packaging 1 2 3 Output 104.5 dB 102 dB 99 dB 97.5 dB 97.5 dB Hanging hardware, Euroblock connector & terminal weather boot U-Mount Bracket (AC-SM-UB5), Pole Mount Adaptor (AC-SM-PMA5), Bent Shaft (AC-SM-BS5) 2 Per box, can ship as single Frequency response is measured in half space and includes a low-frequency peak > + 3 dB. Continuous power rating, EIA-426-B test. 2.83 Volts at a distance of 1 meter. SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement. © 2006 SoundTube Entertainment. All rights reserved. PN TS-SM590 REV 03.03.06 • High-power output (108.5 dB) for longer throw and higher SPL requirements. • One 133 mm (5.25 in) polypropylene woofer and one 25 mm (1.0 in) hornloaded convex aluminum dome tweeter mounted to a proprietary cast-aluminum HP5TM baffle & heat sink. • 89.5 dB Average sensitivity offers high output capabilities and reduced amplification costs. • Weatherized components for indoor/ outdoor applications. Includes a tool-free SpeedLeverTM captured ball mounting system for a fast & secure installation. • Included accessories: Mounting hardware, Euroblock connector & terminal weather boot. • Vertical and horizontal pivoting offer precision aiming for indoor & outdoor applications. • Easy access 6-position selectable tap switch for 25, 70.7 & 100 Volt applications with voice coil/8 Ohm direct simplifies ordering and inventory tracking. • Optional accessories: Pole-Mount Adaptor, Bent Shaft, U-Bracket. • High quality black or white paint finish. Description The SM590i is a high-powered 5.25” 2-way horn-loaded loudspeaker in a ported surface-mount enclosure design. The SM590i incorporates a low-profile grille, proprietary HP5TM motor-board and 6-position tap switch with voice coil/8 Ohm direct. Hanging hardware is included and features a fast-action Speed-LeverTM for easy and secure installation with a proprietary captured ball mounting system. Optional accessories include a pole mount adaptor, a bent shaft and a u-bracket. Applications Engineered for high-SPL and effective low-end response (61 Hz @ - 10 dB), the SM590i delivers consistent high-performance music and paging for applications requiring longer throw or higher volume above the existing ambient noise level. The SM590i is ideal for suface-mount sound reinforcement/PA in applications with high ambient noise levels including casinos, warehouses, airports, transporta- SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers tion & shipping centers, schools, gyms, arenas and stadiums. For additional bass down to 40 Hz (-10 dB) the RS801i subwoofer may be used. Frequency Response ����� ��������������� ���������������� �� ���� Patented SoundTube Technologies SoundTube Entertainment is consistently developing new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S. and international patents, which explicitly cover SoundTube dome, enclosure, mounting and dispersion technologies. SoundTube Entertainment actively defends it patents in order to protect SoundTube resellers and end-users. ���� ���� ���� �������������������������������������������������������������������������������������� ���� �� ��� �� ���� �� ��� Technical Data and Specification Tools Phase/Impedance Reponse Technical Data ����� ���� ��� ��������� ����� ���� ����� ���� ���� ���� ����� ���� ������ ��� �� SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engineers and designers. All data are available from SoundTube Entertainment or at www.soundtube.com. ��� ������ ��� �� ���� �� Beamwidth (-6 dB) ��� Directivity Index (DI) ����� ����� ���� ����� ����� ���� ���� ���� ���� ����� ��� ����� ����� � ������ ���� ������ ������ �������� ��������� ���������� ������ ������ ������ �������� �������� �������� �������� SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers Data Acquisition All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASE™ data are acquired through an automated TEF 20/Outline/EASE™ interface. EASE™ Data – 3-D polar plots. SoundTubeSPEC™ – Proprietary SoundTube speaker placement software. Architectural Specifications The loudspeaker shall consist of a 133 mm (5.25 in) low-frequency transducer and a 25 mm (1 in) high-frequency transducer with a frequency-dividing network installed in a ported enclosure. The low-frequency voice coil diameter shall be 25 mm (1 in). Performance specifications of a typical production unit shall be as follows: Useable frequency response shall extend from 61 Hz – 22 kHz (-10 dB, half space, no external equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 89.5 dB. The speaker shall have a nominal impedance of 8 Ohms and shall be available for 25/70.7/100 Volt modes with voice coil/8 Ohm direct. The frequency-dividing network shall have a crossover frequency of 3 kHz with a slope of 12 dB per octave (second order) for the high-pass filter. Rated power capacity shall be at least 80 Watts continuous power (RMS), and conforms to EIA-426-B testing. Maximum continuous output at 1 meter shall be 108.5 dB. The low-frequency transducer shall have a polypropylene cone with butyl rubber surround. The high-frequency transducer shall be constructed of aluminum material and incorporate a highSPL horn. Installation for the SM590i shall be by proprietary & corrosion-resistant captured-ball mounting system. SoundTube’s tool-free captured-ball mounting system incorporates a locking zinc alloy lever attaching to a cast-alu- minum ball. For seismic and safety redundancy, a secondary aircraft cable shall be included and attached to the speaker chassis via ¼ - 20 bolt. The external wiring input connector shall be a 4-pin, 5 mm Euroblock for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire. The system shall be for indoor/outdoor applications and shall have a weatherresistant terminal boot covering all wire connectors. The enclosure shall be constructed of injection-molded, glassreinforced ABS. The grille shall be constructed of iridite-plated, powder-coated aluminum for lasting performance. Overall cabinet dimensions shall be no more than 316.9 mm (12.48 in) in height by 216.6 mm (8.53 in) in width by 305.1 mm (12.01 in) in depth (including SM bracket). The SM590i shall include mounting hardware, Euroblock connector & terminal weather boot. The system shall be the SoundTube SM590i with mounting hardware for both low and high impedance applications. Polar Plots 125 Hz 250 Hz 500 Hz 1,000 Hz 2,000 Hz 4,000 Hz 8,000 Hz 10,000 Hz Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers SoundTube Entertainment Mechanical Drawings 6430 North Business Park Loop Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com 216.6 mm (8.53 in) All SoundTube products come with a 5-year limited warranty. 316.9 mm (12.48 in) 305.1 mm (12.01 in) Installation Unlocked Locked SoundTube’s SM590i is a surface-mount speaker designed to mount to a wall, pole, ceiling or other rigid structure. Vertical & horizontal pivoting offer unlimited aiming for indoor & outdoor applications. Optional Accessories U-Mount Bracket (AC-SM-UB5) Pole Mount Adaptor (AC-SM-PMA5) Bent Shaft (AC-SM-BS5) SoundTube Entertainment manufactures a complete line of speakers for: Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing All SoundTube products are designed and engineered in the USA.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:24c1ba92-bb67-11da-9501-00039359752c Metadata Date : 2006:03:24 11:51:03-07:00 Modify Date : 2006:03:24 11:51:03-07:00 Create Date : 2005:08:29 11:40:05Z Creator Tool : Adobe InDesign CS (3.0.1) Version ID : 1 Rendition Class : proof:pdf Document ID : adobe:docid:indd:ceac8f66-1a12-11da-bc62-8bb40c34f550 Derived From Instance ID : a15fd122-fc37-11d9-818f-8756487790d7 Derived From Document ID : adobe:docid:indd:8ce18a81-a0fa-11d9-8f8b-bb64ebfb4b3e Derived From Version ID : 1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:485d64bc-a4ae-11da-97bb-00039359752c, uuid:2cafb33a-a48f-11da-97bb-00039359752c, uuid:f006083c-ab10-11da-8de4-00039359752c, uuid:66798996-a3ff-11da-97bb-00039359752c, uuid:da74a64a-a4ad-11da-97bb-00039359752c, uuid:62d12ddd-a4ad-11da-97bb-00039359752c, uuid:a13c8970-a4ac-11da-97bb-00039359752c, uuid:e20367ae-a4ab-11da-97bb-00039359752c, uuid:2ef115ce-a4a8-11da-97bb-00039359752c, uuid:6cc27fd9-a49d-11da-97bb-00039359752c, uuid:e2b3821a-a49c-11da-97bb-00039359752c, uuid:6d43e4f2-a49c-11da-97bb-00039359752c, uuid:50c059dd-ae76-11d9-bb8c-93d1b40ba65d, uuid:7f07f2cc-f97b-11d9-89d7-00039359752c Manifest Reference Document ID : uuid:09385b1c-ad2d-11d9-955b-00039359752c, uuid:afa57bd0-ad12-11d9-955b-00039359752c, uuid:9966bcfc-ad12-11d9-955b-00039359752c, uuid:4d6f37b7-a3f6-11da-bc4c-00039359752c, uuid:da749a23-a4ad-11da-97bb-00039359752c, uuid:62d121c2-a4ad-11da-97bb-00039359752c, uuid:a13c7c8c-a4ac-11da-97bb-00039359752c, uuid:e2035a8e-a4ab-11da-97bb-00039359752c, uuid:2ef10980-a4a8-11da-97bb-00039359752c, uuid:6cc27343-a49d-11da-97bb-00039359752c, uuid:e2b3740a-a49c-11da-97bb-00039359752c, uuid:6d43d8d5-a49c-11da-97bb-00039359752c, adobe:docid:photoshop:50c059dc-ae76-11d9-bb8c-93d1b40ba65d, uuid:7f07e6c3-f97b-11d9-89d7-00039359752c Format : application/pdf Title : SM590i_final.indd Trapped : False Creator : Adobe InDesign CS (3.0.1) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools