Philio Technology PSC02 Gateway User Manual PowerPoint
Philio Technology Corporation Gateway PowerPoint
User Manual
Philio-Tech corporation User Manual PSC01 Gateway Series PSC02 Gateway Series 3. Connect to the the internet. • Go to Settings -> Wi-Fi, choose your own Wi-Fi SSID, and connect it. • Once you connect to Wi-Fi, open the app. 4. Go to Settings -> Gateway Address -> UID, and press QR Code. • Use the camera of your mobile device to scan the QR Code to set up the gateway address. 5. Add your devices • In the Sensor page, press Blue Gear -> Include Device to add Z-wave devices. (Remember to activate the include mode of your device by flipping three times the trigger on it.) 6. Add IPCam • In the Sensor page, press Blue Gear -> Add IPCam -> QR Code to add IPCam by scanning the QR Code with camera 7. Add a room • Press Add new in the Room page to add a new room, enter the name of the room as you like. 8. You can use the picture as your room cover which the IPCam is monitoring. • Drag the sensor icon into your room card for easy management. 9. Scene • Scene can set the room ambiance quickly. It can help you to have a better experience at the special moment. 10. Macro • Still worry about your flat security? Macro is just like your 24-7 personal home guard. It secures your flat. Just set the reactives you wishes, it obeys your orders faithfully. 11. Schedule • • Schedule is your loyalty housekeeper. It do everything accurately you asked. Drag event icon into Schedule, set date, and time , just that easy. Philio Technology Corporation www.philio-tech.com 8F., No.653-2, Zhongzheng Rd., Xinzhuang District, New Taipei City, Taiwan 242 TEL: +886 2 2908 8952 FAX: +886 2 2908 8652 sales@philio-tech.com support@philio-tech.com 11 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Warning Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new once, the retailer is legally obligated to take back your old appliance for disposal at least for free of charge. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 13 Title : PowerPoint 簡報 Creator : Impress Producer : LibreOffice 4.1 Create Date : 2014:07:10 10:29:19+08:00EXIF Metadata provided by EXIF.tools