Philips Consumer Lifestyle AJT600 Alarm clock with Bluethooth User Manual

Philips Consumer Lifestyle Alarm clock with Bluethooth

user manual

www.philips.com/welcomeUser manualAlways there to help youRegister your product and get support atAJT600/37Question?Contact Philips
1ENContents1 Important 22 Your Bluetooth speaker 3What's in the box 3Overview of the main unit 43 Get started 6Connect power 6Set time 6Turn on 74 Play from Bluetooth device 8Bluetooth reset 85 Play audio from an external device 96 Other features 10Set alarm timer 10Set sleep timer 10Adjust display brightness 117 Product information 12Specications 128 Troubleshooting 139 Notice 14
2EN1 Important safety instructiona Read these instructions.b Keep these instructions.c Heed all warnings.d Follow all instructions.e Do not use this apparatus near water.f Clean only with dry cloth.g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.j Only use attachments/accessories specied by the manufacturer.k Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.n Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.).• Remove batteries when the unit is not used for a long time.• The battery (battery or batteries installed) shall not be exposed to excessiveheatsuchassunshine,reorthe like.o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid lled objects, lighted candles). q This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.r Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
3ENWarning •Never remove the casing of this Bluetooth speaker. •Never place this Bluetooth speaker on other electrical equipment. •Keep this Bluetooth speaker away from direct sunlight, nakedamesorheat. •Toreducetheriskofreorelectricshock,donotexpose this apparatus to rain or moisture. •Ensure that you always have easy access to the power cord, plug or adapter to disconnect this Bluetooth speaker from the power.2 Your Bluetooth speakerCongratulations on your purchase, and welcometoPhilips!Tofullybenetfromthesupport that Philips offers, register your product at www.philips.com/welcome.What's in the box AJW600Short User Manualwww.philips.com/welcomeAlways there to help youRegister your product and get support at Question?Contact Philips
4ENOverview of the main unit a SOURCE (Bluetooth/ AUDIO IN)• Select a source.• Press repeatedly to switch to standby mode.b SLEEP• Set sleep timer.c SNOOZE/BRIGHTNESS• Snooze alarm.• Adjust display brightness.d Display panel• Show current information.e AL1/AL2• Activate or deactivate alarm timer.f VOLUME +/-abcdjefghiklmNI OIDUA• Adjust volume.g First Knob (HOUR)• Adjust hour.h Second Knob (MINUTE)• Adjust minute.i Third Knob (CLOCK/SET TIME/SET AL1/SET AL2)• Set clock.• Set alarm.j BUZZ/SOUND 1/SOUND 2• Select an alarm source for Alarm 1 and Alarm 2.k
5EN• Charge your devices through USB cable (not included).l AUDIO IN• Connect an external audio device.3 Get startedAlways follow the instructions in this chapter in sequence.Connect powerThe unit can only be powered by supplied AC power. Batteries are only used for time and alarm backup if not connected with AC power.Option 1: AC powerWarning •Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord.Connect the AC power cord to the wall socket.Tip •To save energy, turn the unit off after use.
6ENOption 2: Battery powerCaution •Batteries contain chemical substances, so they should be disposed of properly.Note •Batteries are not supplied with the accessories. •bAt shows on the display when the battery level is low.1 Open the battery compartment. 2 Insert 2 batteries (type: 1.5V LR6/AA) with correct polarity (+/-) as indicated.3 Close the battery compartment. Set time1 Rotate the Third Knob to "SET TIME" to activate clock setting mode. » Hour and minute digits blinks.2 Rotate the First Knob to adjust the hour.3 Rotate the Second Knob to adjust the minute.4 Press OK on the First Knobtoconrm. » The setting time is displayed.5 Rotate the Third Knob to CLOCK after setting. » The hour and minute digits stops blinking.Turn onThe Bluetooth speaker turns on automatically once your plugged in.
7EN4 Play from Bluetooth deviceNote •The effective operation range between the Bluetooth speaker and the paired device is approximately 10 meters (30 feet). •Keep this Bluetooth speaker away from other electronic devices that may cause interference. •Make sure that the Third Knob switched to CLOCK before setting.1 Press SOURCE repeatedly to select Bluetooth source. » onthedisplaypanelashes.2 Activate the Bluetooth function in your Bluetooth device (see the device user manual). 3 Select “PHILIPS AJT600” displayed on your device for pairing. » If connection is successful, the Bluetooth speaker beeps twice and steadily on.4 Start music play on your Bluetooth device.Bluetooth resetPress OK ontherstknobforover8secondsto erase all pairing informations. » "BT RESET" displayed on the panel.• The Bluetooth speaker enters Bluetooth mode automatically after erase completed.5 Play audio from an external deviceNote •Make sure that the Third Knob switched to CLOCK before setting.You can listen to audio from an external device through this Bluetooth speaker.1 Connect an audio cable to:• the AUDIO IN socket on the Bluetooth speaker.• the headphone socket on an external device.2 Press SOURCE repeatedly to select the Audio-in source. » The on the display panel lights up.3 Play the external device (refer to its user manual).
8EN6 Other featuresSet alarm timerYou can set two alarms to ring at different time.Note •Make sure that you have set the clock correctly.1 Rotate the Third Knob to SET AL1 or SET AL2 to activate alarm setting mode. » The /  and time digits blink.2 Rotate the First Knob to adjust the hour.3 Rotate the Second Knob to adjust the minute.4 Press OK on First Knobtoconrm.5 Rotate the Third Knob to CLOCK after setting.Select alarm sourceYou can select buzzer, sound 1,or sound 2 as your alarm sound. ALARM BUZZ 12Activate/deactivate alarm timerNote •Make sure that the Third Knob switched to CLOCK before setting.1 Press AL1/AL2 to view alarm settings. » The /  lights up.2 Press AL1/AL2 again to activate or deactivate the alarm timer. » The /  appears if alarm timer is on and disappears if it is off.To stop the ringing alarm, press the corresponding AL1/AL2. » The alarm repeats ringing for the next day. Snooze the alarmWhen alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later.Set sleep timerNote •Make sure that the Third Knob switched to CLOCK before setting.This Bluetooth speaker can switch to standby mode automatically after a preset period.• Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears.To deactivate the sleep timer:• Press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 90 120OFF
9ENAdjust display brightness SNOOZEBRIGHTNESS7 Product informationNote •Product information is subject to change without prior notice.SpecicationsAmplierRated Output Power 5W RMSBluetoothBluetoothspecication V3.0+EDRSupportedProles HFPv1.6, A2DPv1.2, HSPv1.2Range 10 m/33 feet line of sightGeneral informationPower supply-AC Power-BatteryModel: ASSA36A-090160; Input: 100-240 V ~, 50/60Hz, 0.6A;Output: 9.0V 1600 mA2 x AA batteriesOperation Power Consumption<15 WStandby Power Consumption<1 WDimensions - Main Unit (W x H x D)195x95x99 mmWeight - Main Unit 0.70 kg
10 EN8 TroubleshootingWarning •Never remove the casing of this device.To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.No power •Ensure that the power cord is connected securely. •Ensure that there is power at the power supply socket. •Ensure that the batteries are installed correctly.No response from the Bluetooth speaker •Disconnect and reconnect the AC power plug, then turn on the Bluetooth speaker again. •Check if you have selected the correct audio source. •Make sure that your Bluetooth device is within the effective operation range.Alarm does not work •Set the clock/alarm correctly.Clock/alarm setting erased •Power has been interrupted or the power plug has been disconnected. •Reset the clock/alarm.9 NoticeAnychangesormodicationsmadetothisdevice that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 this device may not cause harmful interference, and2 this device must accept any interference received, including interference that may cause undesired operation.Notice for the USAThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation between equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
11ENDisposal of your old productYour product is designed and manufactured with high quality materials and components, which can be recycled and reused.Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.Your product contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health.Please visit www.recycle.philips.com for additional information on a recycling center in your area.Environmental informationAll unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The making of unauthorized copies of copy-protected material, including computer programs,les,broadcastsandsoundrecordings,may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Note •The type plate is located on the bottom of the apparatus.
Specifications are subject to change without notice© 2013 Koninklijke Philips Electronics N.V.All rights reserved.Document order number: 000000000000

Navigation menu