Philips Consumer Lifestyle CSS2133B Soundbar Speaker (Soundbar Home Cinema Speaker) User Manual I

Philips Consumer Lifestyle Soundbar Speaker (Soundbar Home Cinema Speaker) I

Contents

User Manual-I

www.philips.com/welcomeUser manualAlways there to help youRegister your product and get support atQuestion?Contact PhilipsCSS2133B_F7_UM_EN.indd   1 2013/1/31   9:25:23
CSS2133B_F7_UM_EN.indd   2 2013/1/31   9:25:23
1ENContents1 Important  2Important safety instructions  2Care for your product  3Care of the environment  3Help and support  42  Your SoundBar  5Main unit  5Remote control  5Connectors 63 Connect  8Subwoofer 8Connect audio from TV and other devices 84  Use your SoundBar  10Play audio from TV or other devices  10Adjust the volume  10Choose your sound  10Night mode  10MP3 player  11Play audio through Bluetooth  11Auto standby  11Apply factory settings  125  Wall mount  136 Productspecications 147 Troubleshooting  158 Notice  16Notice of compliance  16Trademarks 16CSS2133B_F7_UM_EN.indd   1 2013/1/31   9:25:23
2EN1 ImportantRead and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.Important safety instructions •Read these instructions. •Keep these instructions. •Heed all warnings. •Follow all instructions. •Do not use this apparatus near water. •Clean only with dry cloth. •Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. •Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.   •Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. •Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. •Only use attachments/accessories specied by the manufacturer.   •Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. •Unplug this apparatus during lightning storm or when unused for long periods of time. •Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:•  Install all batteries correctly, + and - as marked on the unit.•  Do not mix batteries (old and new or carbon and alkaline, etc.).•  Remove batteries when the unit is not used for a long time.•  The batteries shall not be exposed to excessive heat such as sunshine, re or the like.•  Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.•  The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.CSS2133B_F7_UM_EN.indd   2 2013/1/31   9:25:23
3EN•  If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.•  When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.•  If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. •Apparatus shall not be exposed to dripping or splashing. •Do not place any sources of danger on the apparatus (for example. liquid lled objects, lighted candles). •This apparatus may contain lead and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com. •Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. •Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.•  This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.Class II equipment symbol This symbol indicates that the unit has a double insulation system. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.  The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Care for your product Use only microber cloth to clean the product.Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of CSS2133B_F7_UM_EN.indd   3 2013/1/31   9:25:24
4ENelectrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.For perchlorate material, special handling may apply. Visit  www.dtsc.ca.gov/hazardouswaste/perchlorate.Help and supportPhilips provides extensive online support. Visit our website at www.philips.com/support to:•  download the user manual and the quick start guide•  watch video tutorials (available only for selected models)•  nd answers to frequently answered questions (FAQs)•  email us a question•  chat with our support representative.Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Philips Consumer Care in your country. Before you contact Philips, note down the model number and serial number of your product. You can nd this information on the back or bottom of your product.CSS2133B_F7_UM_EN.indd   4 2013/1/31   9:25:24
5EN2  Your SoundBarCongratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips offers, register your SoundBar at www.philips.com/welcome.Main unit  a  SURRLights up when virtual surround mode is on.Blinks three times when Dolby Digital audio is detected. b  Source indicators•  COAX/OPT: Lights up when you switch to coaxial or optical input source. Blinks when an unsupported audio format is detected.•  AUX: Lights up when you switch to analog input source. •  MUSIC iLINK: Lights up when you switch to Music iLink input source (3.5mm jack).•   Bluetooth: Lights up when you switch to Bluetooth mode and Bluetooth devices are paired: Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired.12Remote control a   (Standby-On) Switch the SoundBar on or to standby.b  Source buttons•  AUX: Switch your audio source to the AUX connection. •   Bluetooth: Switch to Bluetooth mode.•  COAX/OPT: Switch your audio source to the coaxial or optical connection.•  MUSIC iLINK: Switch your audio source to the MUSIC iLINK connection.c  SURROUNDSwitch virtual surround mode on or off.d  TREBLE +/-abcdefgCSS2133B_F7_UM_EN.indd   5 2013/1/31   9:25:24
6ENIncrease or decrease treble.e  VOL +/-Increase or decrease volume.f  BASS +/-Increase or decrease bass.g  MUTEMute or restore volume.Replace batteryWarning •Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. •The product/remote control may or may not contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times!Caution •The battery contains perchlorate material, handle it with care. For information see www.dtsc.ca.gov/hazardouswaste/perchlorate. 1  Open the battery compartment.2  Insert one CR2025 battery, with the polarity (+/-) as indicated.3  Close the battery compartment.ConnectorsThis section includes an overview of the connectors available on your SoundBar.312CSS2133B_F7_UM_EN.indd   6 2013/1/31   9:25:25
7ENSide right MUSIC iLINKAudio input from an MP3 player.Rear left  a  SUBWOOFERConnect to the supplied subwoofer.b  AUDIO IN-AUXConnect to an analog audio output on the TV or an analog device. c  DIGITAL IN-COAXIALConnect to a coaxial audio output on the TV or a digital device. d  DIGITAL IN-OPTICALConnect to an optical audio output on the TV or a digital device. SUBWOOFER (8Ω)L(WHITE)R(RED)AUDIO INAUXCOAXIALOPTICALDIGITAL IN12 3 4Rear right AC MAINS~Connect to the power supply.AC MAINS~CSS2133B_F7_UM_EN.indd   7 2013/1/31   9:25:25
8EN3 ConnectThis section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •For identication and supply ratings, refer to the type plate at the back or bottom of the product. •Before you make or change any connections, make sure that all devices are disconnected from the power outlet.SubwooferFollow the steps below to position and connect your subwoofer. PositionPlace the subwoofer at least one meter (three feet) away from either to the left or right of your SoundBar, and ten centimeter away from the wall.For best results, place your subwoofer as shown below.  ConnectConnect your subwoofer to your SoundBar as described in the quick start guide.Connect audio from TV and other devicesPlay audio from TV or other devices through your SoundBar. Use the best quality connection available on other devices.The audio connections in this user manual are only recommendations. You can use other connections too.If you play audio from the TV through the SoundBar, make sure that the TV is muted.Option 1: Connect audio through a digital optical cableBest quality audio   1  Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. •  The digital optical connector might be labeled SPDIF or SPDIF OUT. Option 2: Connect audio through a digital coaxial cableGood quality audio TVCSS2133B_F7_UM_EN.indd   8 2013/1/31   9:25:26
9EN  1  Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. •  The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cablesBasic quality audio1  Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVDCSS2133B_F7_UM_EN.indd   9 2013/1/31   9:25:26
10 EN4  Use your SoundBarThis section helps you use the SoundBar to play audio from connected devices.Before you start•  Make the necessary connections described in the quick start guide and the user manual.•  Switch the SoundBar to the correct source for other devices.Play audio from TV or other devices  Press the Source buttons to select the audio output of the connected device.Adjust the volume  To increase or decrease volume, press VOL +/-.•  The Source indicators on the front panel blink once when the volume is set to either minimum or maximum.To mute sound, press MUTE.•  The current Source indicator on the front panel blinks continuously.To restore the sound, press MUTE again or press VOL +/-.Choose your soundThis section helps you choose the ideal sound for your music.Change treble or bassChange the high frequency (treble) or low frequency (bass) settings of the SoundBar to suit your music.  Press TREBLE +/- or BASS +/- to increase or decrease treble or bass.•  The Source indicators on the front panel blink once when the treble or bass is set to either minimum or maximum.Surround sound modeExperience an immersive audio experience with surround sound modes.  Press SURROUND repeatedly to switch surround mode on or off.  » When surround mode is on, the SURR on the front panel lights up.Night modeFor quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1  Press and hold SURROUND for three seconds to turn night mode on or off. » When night mode is turned on, the AUX indicator on the front panel blinks twice.CSS2133B_F7_UM_EN.indd   10 2013/1/31   9:25:27
11EN » When night mode is turned off, the MUSIC iLINK indicator on the front panel blinks twice.MP3 playerConnect your MP3 player to play your audio les or music.What you need•  An MP3 player.•  A 3.5mm stereo audio cable.Play music1  Connect the MP3 player to the SoundBar as described in the Quick start guide. 2  Press MUSIC iLINK. » MUSIC iLINK indicator on the front panel lights up.3  Press the buttons on the MP3 player to select and play audio les or music.Play audio through BluetoothThrough Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio les stored on the device through your SoundBar speakers.What you need•  A Bluetooth device which supports Bluetooth prole A2DP, and with Bluetooth version as 3.0 + EDR.•  The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).1  Press   Bluetooth on the remote control to switch the SoundBar to Bluetooth mode. » The   Bluetooth indicator blinks.2  On the Bluetooth device, switch on Bluetooth, search for and select Philips CSS2133B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). » During connection, the   Bluetooth indicator blinks.3  Wait until you hear a beep sound from the SoundBar. » When the Bluetooth connection succeeds, and the   Bluetooth indicator lights up. » If the connection fails, the   Bluetooth indicator blinks continually.4  Select and play audio les or music on your Bluetooth device.•  During play, if a call is coming, music play is paused. Play resumes when the call ends.5  To exit Bluetooth, select other source.•  When your switch back to Bluetooth mode, Bluetooth connection remains active.Note •The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •If you want to connect your SoundBar with another Bluetooth device, press and hold   Bluetooth on the remote control to disconnect the currently connected Bluetooth device. •Philips does not guarantee 100% compatibility with all Bluetooth devices.Auto standbyWhen playing media from a connected device, the SoundBar automatically switches to standby if:•  no button is pressed for 30 minutes, and•  no audio playback is detected from a connected device.CSS2133B_F7_UM_EN.indd   11 2013/1/31   9:25:27
12 ENApply factory settingsYou can reset your SoundBar to the default settings programmed at the factory.1  In AUX mode, within three seconds, press BASS+, VOL-, and Treble+. » When the factory settings restore is complete, the SoundBar automatically switches off and restarts.CSS2133B_F7_UM_EN.indd   12 2013/1/31   9:25:27
13EN5  Wall mountNote •Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. •Before wall mounting, make sure the wall can support the weight of your SoundBar. •Before wall mount, you need not remove the two rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be xed back.Screw length/diameterDepending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter.  For information about how to wall mount your SoundBar, see the quick start guide.> 25mm3-4mm 4mmCSS2133B_F7_UM_EN.indd   13 2013/1/31   9:25:27
14 EN6 Product specificationsNote •Specications and design are subject to change without notice.Amplier•  FTC total output power: 34W•  Left/right speaker (built-in): 16W (1%THD, 4ohm, 300Hz-20kHz)•  Subwoofer: 18W (1%THD, 8ohm, 40Hz-70Hz)•  RMS total output power: 60W (+/- 0.5 dB, 30% THD)•  Frequency response: 20 Hz-20 kHz / ±3 dB•  Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)•  Input sensitivity:•  AUX: 600 mV•  Music iLink: 250 mVAudio•  S/PDIF Digital audio input:•  Coaxial: IEC 60958-3•  Optical: TOSLINKBluetooth •Bluetooth proles: A2DP •Bluetooth version: 3.0 + EDRMain unit •Power supply: 110-127 V~, 60 Hz •Power consumption: 20 W •Standby power consumption: ≤ 0.5 W  •Speaker impedance: 4 ohm woofer, 4 ohm tweeter •Speaker drivers: 25 x 120 mm (1 x 5") woofer, 38 mm (1.5") tweeter •Frequency response: 150 Hz-20 kHz •Dimensions (WxHxD): 708 x 47 x 65 mm •Weight: 1.1 kgSubwoofer•  Impedance: 8 ohm•  Speaker drivers: 130 mm (5.25") woofer•  Frequency response: 20 Hz-150 Hz•  Dimensions (WxHxD): 165 x 240 x 295 mm•  Weight: 2.6 kg•  Cable length: 3 mRemote control batteries•  1 x CR2025 CSS2133B_F7_UM_EN.indd   14 2013/1/31   9:25:27
15EN7 TroubleshootingWarning •Risk of electric shock. Never remove the casing of the product.To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. SoundNo sound from SoundBar speakers.•  Connect the correct audio cable from your SoundBar to your TV or other devices.•  On your SoundBar remote control, press the Source buttons to select the correct audio input.•  Make sure that the SoundBar is not muted. Press VOL +/- to restore the sound.Distorted sound or echo.•  If you play audio from the TV through the SoundBar, make sure that the TV is muted.BluetoothA device cannot connect with the SoundBar.•  The device does not support the compatible proles required for the SoundBar.•  You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.•  The device is not correctly connected. Connect the device correctly.•  The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again.Quality of audio play from a connected Bluetooth device is poor.•  The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.The connected Bluetooth device connects and disconnects constantly.•  The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.•  Turn off Wi-Fi function on the Bluetooth device to avoid interference.•  For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar.CSS2133B_F7_UM_EN.indd   15 2013/1/31   9:25:28
16 EN8 NoticeThis section contains the legal and trademark notices.Notice of complianceThis set complies with the FCC rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions:a  This device may not cause harmful interference, andb  This device must accept any interference received, including interference that may cause undesired operation.FCC rulesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Relocate the receiving antenna.•  Increase the separation between equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Warning: Changes or modications made to this equipment not expressly approved by Philips may void the FCC authorization to operate this equipment.Model number: PHILIPS CSS2133B/F7Trade Name: PhilipsResponsible Party:P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248; 1-866-310-0744La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.Canada: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This Class B digital apparatus complies with Canadian ICES-003. Trademarks Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.  The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. CSS2133B_F7_UM_EN.indd   16 2013/1/31   9:25:28
17ENP&F USA Inc. PO Box 2248 Alpharetta, GA  30023-2248ONE (1) YEAR LIMITED WARRANTYWARRANTY COVERAGE:This warranty obligation is limited to the terms set forthbelow.WHO IS COVERED: This product is warranted to the original purchaser or the per-son receiving the product as a gift against defects in materials andworkmanship as based on the date of original purchase(“Warranty Period”) from an Authorized Dealer. The originalsales receipt showing the product name and the purchase datefrom an authorized retailer is considered such proof. WHAT IS COVERED:This warranty covers new products if a defect in materialor workmanship occurs and a valid claim is received within  the Warranty Period. At its option, the company will either (1)repair the product at no charge, using new or refurbishedreplacement parts, or (2) exchange the product with a productthat is new or which has been manufactured from new, or ser-viceable used parts and is at least functionally equivalent or mostcomparable to the original product in current inventory,or (3) refund the original purchase price of the product.The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty,whichever provides longer coverage for you. When a product orpart is exchanged, any replacement item becomes your propertyand the replaced item becomes the company property. When a refund is given, your product becomes the company property. Note: Any product sold and identified as refurbished orrenewed carries a ninety (90) day limited warranty.Replacement product can only be sent if all warrantyrequirements are met. Failure to follow all requirementscan result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-TATIONS:This Limited Warranty applies only to the new products that  can be identified by the trademark, trade name, or logo affixedto it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The company is not liable for any damage to or loss of any ,programs data, or other information stored on any media  contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.This warranty does not apply (a) to damage caused by accident,abuse, misuse, neglect, misapplication, or non-Philips product, (b)to damage caused by service performed by anyone other thanan Authorized Service Location, (c) to a product ora part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS”without warranty of any kind by including refurbished Philipsproduct sold “AS IS” by some retailers.This Limited Warranty does not cover:•Shipping charges to return defective product. •Labor charges for installation or setup of the product, adjust-ment of customer controls on the product, and installation orrepair of antenna/signal source systems outside of the product.•Product repair and/or part replacement because of improperinstallation or maintenance, connections to improper voltagesupply, power line surge, lightning damage, retained images orscreen markings resulting from viewing fixed stationary con-tent for extended periods, product cosmetic appearance itemsdue to normal wear and tear, unauthorized repair or othercause not within the control of the company.•Damage or claims for products not being available for use, orfor lost data or lost software.•Damage from mishandled shipments or transit accidents whenreturning product.•A product that requires modification or adaptation to enableit to operate in any country other than the country for whichit was designed, manufactured, approved and/or authorized, orrepair of products damaged by these modifications. •A product used for commercial or institutional purposes(including but not limited to rental purposes).•Product lost in shipment and no signature verification receiptcan be provided.•Failure to operate per Owner’s Manual.TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,PUERTO RICO, OR U.S. VIRGIN ISLANDS…Contact Customer Care Center at:1-866-310-0744REPAIR OR REPLACEMENT AS PROVIDED UNDER THISWARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLELAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY ORFITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCTIS LIMITED IN DURATION TO THE DURATION OF THISWARRANTY. Some states do not allow the exclusions or limitation of inciden-tal or consequential damages, or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions maynot apply to you.This warranty gives you specific legal rights.  You may have other rights which vary from state/province to state/province.CSS2133B_F7_UM_EN.indd   17 2013/1/31   9:25:28
CSS2133B_F7_UM_EN.indd   18 2013/1/31   9:25:29
CSS2133B_F7_UM_EN.indd   19 2013/1/31   9:25:30
Specifications are subject to change without notice© 2013 Koninklijke Philips Electronics N.V.All rights reserved.CSS2133B_F7_UM_V1.0P&F USA, Inc.PO Box 2248 Alpharetta, GA  30023-2248Reproductor de Disco de Video Digital CSS2133B/F7IMPORTADOR:P&F MEXICANA. S.A. DE C.V. Av. La Palma #6.Col. San Fernando La HerraduraHuixquilucan, Edo. México.MEXICO C.P.52787. Tel: 52 (55) 5269 - 9000LEA CUIDADOSAMENTE ESTE INSTRUCTIVOANTES DE USAR SU APARATO.Comercializadopor :P&F MEXICANA. S.A. DE C.V.EXPORTADOR: P&F USA Inc.HECHO EN: CHINAGARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO110-127 V~, 60 Hz 20 WhW 02acirtcélE aígrenE ed omusnoCConsumo de Energía Eléctrica del aparato en Modo de Espera   0.5WhCSS2133B_F7_UM_EN.indd   20 2013/1/31   9:25:30

Navigation menu