Philips Consumer Lifestyle DL8740 Ear Thermometer User Manual Leaflet A7 new branding 2015

Philips Consumer Lifestyle Ear Thermometer Leaflet A7 new branding 2015

UserManual.wiki >

Philips Consumer Lifestyle >

DL8740 User Manual

DL8740 user manual USA

Specifications are subject to change without notice.© 2016 Koninklijke Philips N.V.All rights reserved Philips Personal Health SolutionsHigh Tech Campus 375656 AE Eindhoven, The Netherlands4222.100.5746.1 (1/2016)12234DL87405678910111213141516171819

EnglishIntroductionCongratulations on your purchase and welcome toPhilips! To fully benefit from the support thatPhilips offers, register your product atwww.philips.com/welcome. Intended useThe product is intended for measuring thetemperature of the human body. The device is intended for all ages in a homeenvironment.GeneralThis Philips ear thermometer has been developedfor accurate and fast human body temperaturemeasurements in the ear in the adjusted mode. Research indicates that the ear is an ideal site fortaking the body temperature. The body coretemperature is regulated by the hypothalamus(Fig. 2). The hypothalamus (1) shares the sameblood supply as the tympanic membrane (2). Measurement results can be transmitted viaBluetooth® Smart to the Philips HealthSuite healthapp for charting and tracking purposes.General description (Fig. 1)1 Protection cap2 Infrared sensor3 Probe tip4 History icon5 Bluetooth® Smart icon6 Battery symbol7 Temperature display8 Power button9 Temperature light ring10 °F/°C selection button11 Battery compartment12 Battery coverIMPORTANT SAFEGUARDSWarning: READ ALL INSTRUCTIONS BEFOREUSINGWhen using battery-operated products, especiallywhen children are present, basic safetyprecautions should always be followed, includingthe following:Warning - Do not measure the body temperature at theear site if the ear is inflamed or infected.- Stop using the device in the occurrence of anypain. It is likely to damage the ear canal.- If the measured body temperature exceeds100.4°F / 38°C and the person whosetemperature is being measured feelsuncomfortable, contact your physician.- It is recommended not to use the device if yousuffer from ear disease, including otitis externaand tympanitis.- Keep the device out of the reach of childrenand pets to avoid inhalation or swallowing ofsmall parts. Children may not be able to use thedevice according to the instructions in this usermanual. It is not a toy.- Do not throw disposable batteries into fire.Batteries may explode.- Do not put the device in a wet ear canal afterswimming or bathing. This may cause injury tothe ear canal.- Do not use the device if it is broken ordamaged. Using a broken or damaged devicemay cause injury.- Do not use the thermometer under temperatureextremes (below 59°F / 15°C or over 95°F / 35°C)or humidity extremes (below 20%RH or over80%RH). If you do, this may cause inaccuratemeasurements.- Do not expose the thermometer to temperatureextremes (below 14°F / -10°C or over 131°F /55°C) or humidity extremes (below 20%RH orover 90%RH). If you do, this may causeinaccurate measurements.- Do not store the device in extreme temperature(below -4°F / -20°C or over 140°F / 60°C) or inextreme levels of humidity (below 15%RH orover 85%RH). If you do, this may causeinaccurate measurements. Caution - Only use the device as described in this usermanual. Do not use it for any other purpose. 1298465711101231

Cleaning the infrared sensorTo achieve accurate measurements, it is importantto check if the infrared sensor is clean. Use acotton swab to clean the infrared sensor.See chapter Cleaning and storage for instructions. After cleaning, wait approximately 5-10 minutesbefore you use the device.Cleaning the earEarwax in the ear canal may cause inaccuratemeasurements. Make sure the ear canal is cleanbefore you use the device.Carefully clean your ear canal. If you clean yourear, wait for 5-10 minutes before you use thedevice.Resetting the thermometerIf you press the °F/°C selection button on the sideof the thermometer for longer than 10 seconds, allmeasurements are deleted from the device and allsettings return to the factory values.Measuring temperatureTips for proper measurementExternal factors can influence your bodytemperature. In the following cases, wait atleast 30 minutes before taking your temperature:- When you have been lying on your ear- When you had your ears covered- When you have been exposed to very low orvery high temperatures- When you have been swimming or bathing - If you wear earplugs or hearing aids, removethem firstWe do not advise you to use the device in thefollowing circumstances as this may causeinaccurate measurements:- When the temperature of the storage areadiffers from the temperature of the measuringarea. In this case, wait at least 30 minutesbefore you use the device.Body temperatureNormal body temperature is a range. A person'snormal temperature range tends to decrease withage. The following table shows normaltemperature ranges by age.The range of normal body temperature varies fromperson to person and can be influenced by manyfactors such as time of day, level of activity andemotions. Age Temperature in°FahrenheitTemperature in°Celsius0-2years97.5 - 100.4 °F 36.4 - 38.0 °C3-10years97.0 - 100.0 °F 36.1 - 37.8 °C11-65years96.6 - 99.7 °F 35.9 - 37.6 °C> 65years96.4 - 99.5 °F 35.8 - 37.5 °CSource: Chamberlain, J.M., et al., Determination ofNormal Ear Temperature with an Infrared EmissionDetection Thermometer, Annals of EmergencyMedicine, January 1995, Vol. 25, pp. 15-20.Performing a measurementNote: Before measuring, make sure that the probetip of the device is clean.1 Remove the protection cap before you use thedevice (Fig. 7). 2 Press the power button to switch on the device. -The display shows the last measurementresult as well as the history icon.3 Hold the outer ear and gently pull it towards therear of the head to straighten the ear canal. -Children under the age of 1: hold the outerear and gently pull it straight back. (Fig. 8)-Children aged 1 year or older: hold the outerear and gently pull the ear up and back (Fig.9). 4 Insert the probe tip very gently and slowly intothe ear canal (Fig. 10). -Make sure the probe tip points straighttowards the eardrum when you hold it. -Always insert the probe tip into the sameear, in the same direction and at thesame depth. Note: A temperature measurement taken in theright ear may differ from a measurement takenin the left ear. 5 Press the power button to start themeasurement. (Fig. 11) -When the measurement is done, you hear 2beeps.6 Remove the probe tip from the ear canal (Fig.12). -The display shows the measuredtemperature and the temperature light ringaround the power button lights up red, if themeasured temperature is above 100.4° F/38.0°C.Note: The temperature display on the deviceshows the measurement result for 30 seconds oruntil you perform a new measurement.Temperature light ringThis device is equipped with a temperature lightring around the power button (Fig. 13).After the measurement, the ring lights up red,depending on the measured temperature. - When the temperature light ring lights up red,the measured temperature is between 100.4 °F(38.0 °C) and 109.2 °F (42.9 °C).Transmit and display personalmeasurement results in the appNote: Your personal measurement data is onlystored and displayed in the Philips HealthSuitehealth app.1 Start up the Philips HealthSuite health app andswitch on Bluetooth on your mobile device.2 The Bluetooth symbol will light up on thedisplay of the thermometer to indicate it isconnected to your mobile device.

- Once successfully connected, the measurementresults will be automatically transmitted to yourmobile device via Bluetooth. - If the data transmission is successful, themeasurement results are displayed in thePhilips HealthSuite health app. - The time and date of each measurement isshown in the Philips HealthSuite health app.Removing/inserting batteriesWhen the batteries are almost empty, the displayshows a flashing battery symbol and the text "bAtt'(Fig. 14). When the battery low symbol appears onthe display (Fig. 4) or if the device does notfunction at all, replace the batteries as soon aspossible. The device works on 2x 1.5V AAA Alkalinebatteries.Data will be lost when the batteries are completelyempty or are taken out of the thermometer.1 Slide the battery cover downwards to open thebattery compartment and remove the emptybatteries (Fig. 15).2 Insert two new batteries in the batterycompartment according to the polarityindications ( + and - ) marked inside thecompartment. Press down the batteries untilthey click into place (Fig. 16).3 Slide the battery cover back until it locks intoplace (Fig. 5).Setting the measurement unitYou can select either Fahrenheit (°F) or Celsius (°C)for measuring temperature.1 Switch on the device.2 Press and hold the °F/°C selection button for 3seconds to change the measurement unit (Fig.17).Cleaning and storage Caution: Do not expose the device to extremetemperatures (below -4 °F/-20 °C or over140 °F/60 °C), extreme levels of humidity (below15%RH or over 85%RH), direct sunlight or shock.This may result in inaccurate measurements.Use a cotton swab to clean the infrared sensor. Forhygienic reasons, the device should be cleanedafter each use1 Moisten the cotton swab with a few drops ofalcohol and wipe the surface of the infraredsensor gently with the swab (Fig. 18).2 Immediately wipe the surface dry with a cleancotton swab. 3 Use a soft dry cloth to clean the body of thedevice (Fig. 19). 4 Store the device in a clean, dry place at roomtemperature. CalibrationThe device has been calibrated when it wasmanufactured. If the device is used according tothe instructions, periodic recalibration is notrequired. If you question the accuracy of themeasurement at any time, call 1-844-531-6861 forassistance.AccessoriesPhilips accessories may be purchased at a storenear you, or on our websitewww.philips.com/store. This device has no other user-serviceable parts.For assistance call 1-844-531-6861.SpecificationsPower supply 2 x AAA non-rechargeablealkaline batteriesTemperaturemeasuringrange90.3 °F - 109.2 °F / 32.4 °C -42.9 °CIn-earmeasurementaccuracy±0.4 °F (±0.2 °C) within the rangeof 90.3 °F - 109.2 °F / 32.4°C -42.9°CDimensions 5.3" (L) x 1.5" (W) x 1.1" (H) mmWeight About 0.12 lb / 54.6 g (withoutbattery)Operatingconditions50.0 °F - 104.0 °F (10.0 °C -40.0 °C) with a relative humidityof 15% - 85%, 86 kPa to 106 kPaStorage andtransportconditions-4 °F - 140 °F (-20 °C - 60 °C) witha relative humidity of 15% - 85%,86 kPa to 106 kPaDisposalThis product may contain lead and mercury.Disposal of these materials may be regulated dueto environmental considerations. For disposal orrecycling information, please contact your localauthorities or visit www.recycle.philips.com.This product contains batteries:- Dispose of batteries properly. Do not incinerate.Batteries may explode if overheated.- Do not wrap in metal or aluminum foil. Tape thewaste battery terminals before discarding.- It is suggested that you contact your local townor city to determine proper battery redemptionsite(s) in your area.- Battery must be removed from the devicebefore discarding.TroubleshootingThis chapter summarizes the most commonproblems you could encounter with the device. Ifyou are unable to solve the problem with theinformation below, visit www.philips.com/supportfor a list of frequently asked questions or call1-844-531-6861 for assistance. Problem PossiblecauseSolutionThe devicedoes notrespond orresetsautomaticallywhen I pullout thebattery strip.The batteriesare empty.Replace thebatteries.

App Store and iPhoneApp Store and iPhone are trademarks of AppleInc., registered in the U.S. and other countries. AppStore is a service mark of Apple Inc. Google Play and AndroidGoogle Play and Android are trademarks of GoogleInc.EMC Guidance- The ear thermometer needs special precautionsregarding EMC and needs to be installed andput into service according to the EMCinformation provided in this document.- Wireless communications equipment such aswireless home network devices, mobile phones,cordless telephones and their base stations,walkie-talkies can affect this equipment andshould be kept at least a distance d = 3.3 maway from the equipment.Note: As indicated in IEC 60601-1-2:2007 for MEequipment, a typical cell phone with a maximumoutput power of 2 W yields d = 3.3 m at animmunity level of 3V/m.FCC Compliance informationThis device complies with Part 15 of the FCC Rules.Operation is subject to the following twoconditions: (1) this device may not cause harmfulinterference, and (2) this device must accept anyinterference received, including interference thatmay cause undesired operation.Radio interferenceThis equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protectionagainst harmful interference in a residentialinstallation. This equipment generates, uses andcan radiate radio frequency energy and, if notinstalled and used in accordance with theinstructions, may cause harmful interference toradio communications. However, there is noguarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interferenceto radio or television reception, which can bedetermined by turning the equipment off and on,the user is encouraged to try to correct theinterference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between theequipment and receiver.- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TVtechnician for help.RF Radiation exposure statementThis equipment complies with FCC RF radiationexposure limits set forth for an uncontrolledenvironment. For handheld/body-worn operation,this equipment has been tested and meets theFCC RF exposure guidelines. This transmitter mustnot be co-located or operating in conjunction withany other antenna or transmitter. Use of otheraccessories may not ensure compliance with FCCRF guidelines.Do not attempt to repair or modify this equipment.Any repairs or alterations made by the user to theequipment may void the warranty and complianceof the equipment. Changes or modifications madeto this equipment not expressly approved byPhilips may void the FCC authorization to operatethis equipment. For assistance visit our websitewww.philips.com/support or call toll-free1-844-531-6861.Electromagnetic emissions andimmunityThe device is approved according to EMC safetystandard IEC 60601-1-2. It is designed to be usedin typical domestic environments.Table 1 Guidance and manufacturer'sdeclaration – electromagnetic emissions- for all ME equipment and ME systemsGuidance and manufacturer’s declaration –electromagnetic emissionsThe device is intended for use in theelectromagnetic environment specified below. Thecustomer or the user of the device should assurethat it is used in such an environment.Emissions test ComplianceElectromagneticenvironment -guidanceRF emissionsCISPR 11Group 1 The device must emitelectromagneticenergy in order toperform its intendedfunction. Nearbyelectronic equipmentmay be affected.RF emissionsCISPR 11Class BHarmonicemissions IEC61000-3-2NotapplicableVoltagefluctuations/flickeremissions IEC61000-3-3Notapplicable Guidance and manufacturer's declaration– electromagnetic immunity – for all MEequipment and ME systemsGuidance and manufacturer’s declaration –electromagnetic immunityThe device is intended for use in theelectromagnetic environment specified below. Thecustomer or the user of the device should assurethat it is used in such an environment.

Immunity testIEC60601testlevelCompliancelevelElectromagneticenvironment -guidanceElectrostaticdischarge(ESD)IEC61000-4-2±6 kVcontact±8 kV air±6 kVcontact±8 kVairFloors should bewood, concrete orceramic tile. Iffloors are coveredwith syntheticmaterial, therelative humidityshould be at least30%.Powerfrequency(50/60Hz)magnetic fieldIEC61000-4-83A/m 3A/m Power frequencymagnetic fieldsshould be at levelscharacteristic of atypical location ina typicalcommercial orhospitalenvironment.Table 4 Guidance and manufacturer'sdeclaration – electromagnetic immunity–for ME equipment and ME systems thatare not life supportingGuidance and manufacturer’s declaration –electromagnetic immunity .The device is intendedfor use in the electromagnetic environmentspecified below. The customer or the user of thedevice should assure that it is used in such anenvironment.IMMUNITYtestIEC 60601 TESTLEVELCompliancelevelConducted RFIEC61000-4-63 Vrms150 kHz to80 MHz 3 VrmsRadiated RFIEC61000-4-33 V/m80 MHz to 2.5GHz3 V/mElectromagnetic environment - guidancePortable and mobile RF communicationsequipment should be used no closer to any part ofthe device, including cables, than therecommended separation distance calculated fromthe equation applicable to the frequency of thetransmitter.Recommended separation distance:d = 1.167 ÖPd = 1.167 ÖP 80 MHz to 800MHzd = 2.333 ÖP 800 MHz to 2.5 GHzwhere P is the maximum output power rating ofthe transmitter in watts (W) according to thetransmitter manufacturer and d is therecommended separation distance in metres (m).Field strengths from fixed RF transmitters, asdetermined by an electromagnetic site survey (a),should be less than the compliance level in eachfrequency range (b).Interference may occur in the vicinity of equipmentmarked with the following symbol: NOTE 1 At 80 MHz and 800 MHz, the higherfrequency range applies.NOTE 2 These guidelines may not apply in allsituations. Electromagnetic propagation is affectedby absorption and reflection from structures,objects and people.(a) Field strengths from fixed transmitters, such asbase stations for radio (cellular/cordless)telephones and land mobile radios, amateur radio,AM and FM radio broadcast and TV broadcastcannot be predicted theoretically with accuracy. Toassess the electromagnetic environment due tofixed RF transmitters, an electromagnetic sitesurvey should be considered. If the measured fieldstrength in the location in which the device is usedexceeds the applicable RF compliance levelabove, the device should be observed to verifynormal operation. If abnormal performance isobserved, additional measures may be necessary,such as re-orienting or relocating the device.(b) Over the frequency range 150 kHz to 80 MHz,field strengths should be less than 3V/m.Table 6 Recommended separationdistances between portable and mobileRF communications equipment and theME equipment or ME system – for MEequipment and ME systems that are notlife supportingRecommended separation distances betweenportable and mobile RF communicationsequipment and the device.The device is intended for use in anelectromagnetic environment in which radiated RFdisturbances are controlled. The customer or theuser of the device can help preventelectromagnetic interference by maintaining aminimum distance between portable and mobileRF communications equipment (transmitters) andthe device as recommended below, according tothe maximum output power of thecommunications equipment. Separation distance according tofrequency of transmitter (m)Ratedmaximumoutputpower oftransmitter(W)150 kHz to80 MHzd = 1.167 ÖP80 MHzto 800MHz d = 1.167 ÖP800 MHzto 2.5 GHzd = 2.3330.01 0.117 0.117 0.2330.1 0.369 0.369 0.7381 1.167 1.167 2.33310 3.690 3.690 7.378

Separation distance according tofrequency of transmitter (m)100 11.67 11.67 23.33For transmitters rated at a maximum output powernot listed above, the recommended separationdistance d in metres (m) can be estimated usingthe equation applicable to the frequency of thetransmitter, where P is the maximum output powerrating of the transmitter in watts (W) according tothe transmitter manufacturer.NOTE 1 At 80MHz and 800MHz, the separationdistance for the higher frequency range applies.NOTE 2 These guidelines may not apply in allsituations. Electromagnetic propagation is affectedby absorption and reflection from structures,objects and people. Explanation of symbolsThe warning signs and symbols are essential toensure that you use this product safely andcorrectly and to protect you and others from injury.Below you find the meaning of the warning signsand symbols on the label and in the user manual.Read the user manual before you use thedevice.This symbol means that the part of thedevice that comes into physical contactwith the user (also known as the appliedpart, probe tip) is of type BF (BodyFloating) according to IEC 60601-1.Indicates the manufacturer.Symbol for the 'Bluetooth Smart mark'.The device uses Bluetooth forcommunication.Indicates the manufacturer's serialnumber so that a specific medical devicecan be identified.Indicates manufacturer's catalog numberof the device.Indicates caution.The user should consultthe instructions for use for importantcautionary information such as warningsand precautions that cannot, for a varietyof reasons, be presented on the medicaldevice itself.IP22: The first number 2: Protected againstsolid foreign objects of 12,5 mm Ф andgreater. The second number: Protectedagainst vertically falling water drops whenenclosure is tilted up to 15°. Verticallyfalling drops shall have no harmful effectswhen the enclosure is tilted at any angleup to 15° on either side of the vertical.–20ºC60ºC–4ºF140ºFIndicates the storage and transportationtemperature limits to which the medicaldevice can be safely exposed: -4°F -140°F / -20°C to 60°C.Indicates the storage and transportationrelative humidity limits to which themedical device can be safely exposed:15% - 85%Symbol for the 2 year Philips warranty.This symbol is a certification mark. It isused on electronic productsmanufactured or sold in the United States.It confirms that the electromagneticinterference from the device is lower thanthe limits approved by the FCC.