Philips Consumer Lifestyle NP2500 Network Player User Manual NP2500 English

Philips Consumer Lifestyle Network Player NP2500 English

User manual

Register your product and get support atEN User manual 1 Contact information 42NP2500/37
2Congure a PC to share music 20Congure a MAC to share music 20Alphanumeric search 20Internet radio 21Listen to Internet radio 21Mark radio stations as Favorites 22Listen to Favorite Stations 22Remove a Favorite Station 22Manually add Internet radio stations 22Listen to My Media 23Listen to Rhapsody® music services 23Rate Rhapsody® music 248 Settings 25Play mode 25Sound settings 25Equalizer settings 25Display settings 25Brightness settings when the NP2500 is turned on 26Brightness settings when the NP2500 is switched to standby 26Clicker sound 26Album art 26Clock settings 26Alarm settings 27Network settings 27Wireless connection with automatic IP address 27Wireless connection with static IP address 28Wired connection with automatic IP address 29Wired connection with static IP address 29Location and time zone 30Language 30Register the NP2500 31Unregister the NP2500 31Registration information 31Check for software upgrades 31Information 32Demo mode 32Call center numbers 32Restore factory settings 32Contents1 Important 4Safety 4Notice 52 Your Network Music Player 8Overview 8Top view 8Front view 8Rear view 8Remote control 93 Prepare 11Install remote control batteries 11Position the NP2500 114 Connect 12Connect sound system 12Connect AC power 125 Turn On and Switch to Active standby / Eco standby 136 First-time setup 14View the demo 14First-time connection to home network 14First-time setup: Wireless connection with automatic IP address 15First-time setup: Wireless connection with static IP address 16First-time setup: Wired connection with automatic IP address 17First-time setup: Wired connection with static IP address 177 Play 19Adjust volume 19Mute the sound 19Shufe play 19Repeat play 19Wirelessly stream music from a computer 19Install Twonky Media Server 20EN
39 Maintenance 34Cleaning 3410 Technical data 35Supported audio le formats 36Supplied accessories 36Computer connection requirements 3611 Troubleshooting 3712 Glossary 38Contents EnglishEN
4g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. i For countries with a polarized mains, do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.Caution: To prevent electric shock, match the wide blade of the plug to the wide slot, fully insert. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.k Only use attachments/accessories specied by the manufacturer.l Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 ImportantSafetyKnow these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. a Read these instructions.b Keep these instructions.c Heed all warnings.d Follow all instructions.e Do not use this apparatus near water.f Clean only with dry cloth.EN
5NoticeClass II equipment symbol This symbol indicates that the unit has a double insulation system.Notice of complianceFor USA: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.For Canada: This Class B digital apparatus complies with Canadian ICES-003.The set complies with the FCC-Rules, Part 15, with RSS-210 of Industry Canada. Operation is subject to the following two conditions:This device may not cause harmful interference, and•••••m Unplug this apparatus during lightning storms or when unused for long periods of time. n Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.).Remove batteries when the unit is not used for a long time.p Apparatus shall not be exposed to dripping or splashing. q Do not place any sources of danger on the apparatus (e.g. liquid lled objects, lighted candles). r This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.WarningNever remove the casing of this NP2500. Never lubricate any part of this NP2500.Place this NP2500 on a at, hard and stable surface.Never place this NP2500 on other electrical equipment.Only use this NP2500 indoors. Keep this NP2500 away from water, moisture and liquid-lled objects.Keep this NP2500 away from direct sunlight, naked ames or heat. •••••••••Important EnglishEN
6Listen for reasonable periods of time:Prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing loss.Be sure to use your equipment reasonably and take appropriate breaks.Be sure to observe the following guidelines when using your headphones.Listen at reasonable volumes for reasonable periods of time.Be careful not to adjust the volume as your hearing adapts.Do not turn up the volume so high that you can’t hear what’s around you.You should use caution or temporarily discontinue use in potentially hazardous situations.Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a trafc hazard and is illegal in many areas.Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health.Battery disposal informationYour product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.This device must accept any interference received, including interference that may cause undesired operation.Declaration of ConformityModel number: NP2500/37Trade name: PhilipsResponsible party: Philips Consumer Lifestyle A Division of Philips Electronics North America Corp. P.O. Box 671539 Marietta, GA 30006-0026 1-800-PHILIPS (744-5477)Radiofrequency radiation exposure Information:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Hearing Safety Listen at a moderate volume:Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.To establish a safe volume level:Set your volume control at a low setting.Slowly increase the sound until you can hear it comfortably and clearly, without distortion.•EN
7Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health.0984Your Network Music Player EnglishENAny changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
8Rear view a jackb DIGITAL OUT (black) jackc LINE OUT (red/white) jacksd AUX IN L / R (red/white) jackse POWER SUPPLY jackf ETHERNET jack2 Your Network Music Player Congratulations on your purchase and welcome to Philips!To fully benet from the support that Philips offers, register your product at www.philips.com/welcome.OverviewTop view a (On / Standby / Eco standby)b (mute the sound)c VOL (adjust the volume)Front view a DisplayEN
9f CLOCK (activate the time display)g FAVORITE (mark the current station as favorite)h (navigate) i OK (conrm)j HOME (go to the Home menu)k (play/pause current le / SuperPlay™ current list)l (skip to the next le)m (mute/unmute the sound)n NOW PLAYING (go to current play screen)o VOL (increase/decrease the play volume)p Alphanumeric buttonsq CLEAR (press to delete the last character entry / press and hold to delete the whole line entry)r FULLSOUND (activate/deactivate FullSound™)s DBB (activate/deactivate Dynamic Bass Boost)t SNOOZE (stop the alarm sound for 15 minutes)u SLEEP TIMER (toggle through the sleep timer options)v REPEAT (toggle through the repeat play options)w SHUFFLE (activate/deactivate the random order play)x NEUTRAL (deactivate/activate all sound processes)y EQ (toggle through the preset equalizer options)z a/A (change shift for the alphanumeric entry)Remote controlYou can control the NP2500 with the remote control. a (On / Standby)b BRIGHTNESS (adjust the display illumination)c AUX (select the external source)d ONLINE SERVICES (go to the optional online services menu)e NOW PLAYING (go to the current play screen)Your Network Music Player EnglishEN
10{ RATE (increase/decrease rating of current music)| (stop)} (skip to the previous le / clear last entry)~ BACK (go back to the previous screen) SEARCH (search les)€ DEMO (activate the demo play) SETTINGS (go to the Settings menu)‚ INTERNET RADIO (go to the Internet radio menu)ƒ MUSIC (go to the Music menu)EN
113 PrepareInstall remote control batteriesCautionRisk of explosion! Keep batteries away from heat, sunshine or re. Never discard batteries in re.Risk of decreased battery life! Never mix different brands or types of batteries.Risk of product damage! When the remote control is not used for long periods, remove the batteries.••• Position the NP2500CautionRisk of product damage! Place the NP2500 on a surface that is level, at, and strong enough to support the NP2500.•Connect EnglishEN
12 2 Continue with the steps in chapter First-time setup. NoteThe type plate information is located at the back or at the underside of the NP2500.•4 ConnectConnect sound system1 Use the supplied red and white audio cables to connect the AUX IN jacks of the sound system with the red and white LINE OUT jacks of the NP2500 (see ‘Rear view’ on page 8). 2 Set the source of the sound system to ‘AUX’.3 Control the sound system as you normally would.Connect AC powerWarningRisk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the NP2500.•1 Connect the NP2500 to the power supplyEN
135 Turn On and Switch to Active standby / Eco standbyYou can select from the following status options:On (the full display and the remote control are active, button LED is off)Active standby (the clock display and the remote control are active, button LED is red)Eco standby (the display and the remote control are deactivated, button LED is off)In status On or Active standby,press the on the remote control to toggle the NP2500 between Active standby and On.press and hold the on the NP2500 to switch the NP2500 to Eco standby.In status Eco standby, press the button on the NP2500 or on the remote control to turn the NP2500 On.NoteIn stop (idle) mode, if no buttons are pressed for 20 minutes, the NP2500 switches to Active standby.•••••••First-time setup EnglishEN
14NoteThe NP2500 remains in rst-time setup status until you select [No] to decline the demo play.You can start the demo play again with the DEMO button on the remote control or in the Settings menu of the NP2500.••First-time connection to home networkAfter you select [No] to decline to view the demo, the NP2500 prompts you to select your location / time zone. The NP2500 also reminds you to register the NP2500 at www.philips.com/welcome and to install the PC software.This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.1 Select the location / time zone and conrm.The NP2500 shows the prompt for the network connection.2 Select [Yes], to create a connection to the network.The NP2500 shows the prompt for the network setup (if no network has been set up yet). Select [No] to exit the setup and go to the Home menu.3 Continue with one of the following options:First-time setup: Wireless network connection with automatic IP address (see ‘First-time setup: Wireless connection with automatic IP address’ on page 15)This setup requires the following:••••»»»•»6 First-time setupThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.When you connect the NP2500 to the power supply for the rst time, the NP2500 displays the prompt for the language selection.1 Select the language and conrm.The NP2500 displays the prompt for the optional demo play.You have two options:View the demo. (see ‘View the demo’ on page 14)Complete the rst-time setup. (see ‘First-time connection to home network’ on page 14)TipAfter the rst-time set-up, you can change the language in the Settings menu.•View the demo1 Select “[Yes, show me the demo]”, to view the demo.The demo plays continuously until you exit the demo play.2 To exit the demo play, press .••••»••»EN
15Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wireless setup with automatic IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.Ensure that your network name and network password or encryption key are available.1 Turn on your wireless access point or wireless router with broadband Internet access.2 Follow the steps in chapter First-time connection to home network (see ‘First-time connection to home network’ on page 14) until the NP2500 shows the prompt for the network setup.3 Select [Wireless (WiFi)] to start the network setup process.The NP2500 searches for networks.4 Select your network from the list of found networks and conrm.Enter the encryption key (if required) and conrm.•••••••»•A wireless access point or wireless router with broadband Internet accessManual entry of your encryption key (for encrypted network connections only)First-time setup: Wireless network connection with static IP address (see ‘First-time setup: Wireless connection with static IP address’ on page 16)This setup requires the following:A wireless access point or wireless router with broadband Internet accessManual entry of your IP address.Manual entry of your encryption key (for encrypted network connections only)First-time setup: Wired (Ethernet) network connection with automatic IP address (see ‘First-time setup: Wired connection with automatic IP address’ on page 17)This setup requires the following:A wired access point or wired router with broadband Internet access and a free Ethernet port An Ethernet cable (sold separately).First-time setup: Wired (Ethernet) network connection with static IP address (see ‘First-time setup: Wired connection with static IP address’ on page 17)This setup requires the following:A wired access point or wired router with broadband Internet access and a free Ethernet port Manual entry of your IP address.An Ethernet cable (sold separately).First-time setup: Wireless connection with automatic IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.»»•»»»»•»»»•»»»»••First-time setup EnglishEN
16the Internet. This section describes the typical wireless setup with static IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.Ensure that your network name and network password or encryption key are available.1 Turn on your wireless access point or wireless router with broadband Internet access.2 Follow the steps in chapter First-time connection to home network (see ‘First-time connection to home network’ on page 14) until the NP2500 shows the prompt for the network setup.3 Select [Wireless (WiFi)] to start the network setup process.The NP2500 searches for networks.4 Select your network from the list of found networks and conrm.Enter the encryption key (if required) and conrm.The NP2500 tries to acquire an automatic IP address.5 Press BACK to enter your IP address manually.6 Enter your static IP address and conrm.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.7 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.NoteYou can enter more than one encryption key. In this case, the NP2500 prompts you to select the default encryption key.••»••»»»The NP2500 acquires the automatic IP address.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.5 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.NoteYou can enter more than one encryption key. In this case, the NP2500 prompts you to select the default encryption key.•First-time setup: Wireless connection with static IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and •••»••••••••EN
174 Select [Wired (Ethernet)] to start the network setup process.The NP2500 acquires the automatic IP address.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.5 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.First-time setup: Wired connection with static IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wired setup with static IP address. You can also follow the onscreen prompts for advanced »»»»••••••••First-time setup: Wired connection with automatic IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of the NP2500 (see ‘Rear view’ on page 8) and the Ethernet jack of the wired router.2 Ensure that the wired router is turned on and has broadband Internet access.3 Follow the steps in chapter First-time connection to home network (see ‘First-time connection to home network’ on page 14) until the NP2500 shows the prompt for the network setup.••••••••First-time setup EnglishEN
18congurations that are not described in this manual.1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of the NP2500 (see ‘Rear view’ on page 8) and the Ethernet jack of the wired router.2 Ensure that the wired router is turned on and has broadband Internet access.3 Follow the steps in chapter First-time connection to home network (see ‘First-time connection to home network’ on page 14) until the NP2500 shows the prompt for the network setup.4 Select [Wired (Ethernet)] to start the network setup process.The NP2500 tries to acquire an automatic IP address.Press BACK to enter your IP address manually.5 Enter your static IP address and conrm.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.6 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.»»»»»EN
19Shufe playYou can play the audio les of the current selection in random order (shufed).1 During play, press SHUFFLE to toggle the shufe function on and off.Repeat playYou can repeat one or all audio les of the current selection.1 In play mode, press REPEAT to toggle the repeat function as follows:[Repeat 1]The current audio le is continuously repeated until another mode or setting is selected.[Repeat all]All audio les of the current selection are continuously repeated until another mode or setting is selected.[Off] (default)Audio les are played once (normal play).Wirelessly stream music from a computerYou can wirelessly stream music to the NP2500 from a connected computer, if you install TwonkyMedia™ on the computer and congure the computer to share your music. (If TwonkyMedia™ is already installed on the computer, you can skip the installation section and continue with the conguration. For any other media players, refer to the instructions supplied with the player.)TwonkyMedia™ is a registered trademark of Packet Video™ Corporation. All rights reserved. © Packet Video Corporation, 10350 Science Center Drive, San Diego, California, USA.••••••7 PlayYou need the remote control to play music.This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The play and pause operations on the remote control of the NP2500 are the same for any music source that you choose:1 Press HOME.2 Select the source.3 Select the options.4 Press to play.5 Press to play.Press to toggle between pause and play.6 Press to stop.TipThe following chapters explain the play options and music sources that are available.•Adjust volume1 During play, press VOL to adjust the volume.Mute the sound1 During play, press MUTE to toggle the sound off and on.•••••Install Twonky Media Server EnglishEN
20Congure a MAC to share musicYou can share music from a MAC with the NP2500. This chapter shows you how to congure the MAC to share music.1 Follow the instructions in chapter Install the TwonkyMedia™ Server (see ‘Install Twonky Media Server’ on page 20).2 On the MAC, click Go > Applications > TwonkyMedia™ Server.3 Click the TwonkyMedia™ Server icon in the task bar.4 Choose TwonkyMedia™ Settings.5 In the Basic Setup of the Conguration Page, click on Sharing.The content directories are scanned.To manually locate the music, click Browse.To manually add a new content directory, click Add new content directory.To save the changes, press Save Changes. 1 On the remote control of the NP2500, press HOME.2 Select [Music] and conrm with OK.The display shows [Searching for UPnP music servers…], followed by the list of media servers.3 Press to select the server name and conrm with OK.NoteThe TwonkyMedia™ sharing page lets you set the rescan behavior of the server. The default setting is -1 minute, which ensures auto-scan.•Alphanumeric searchYou can perform an alphanumeric search for specic audio les on a connected UPnP device.This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.»•••»••Install Twonky Media Server1 On the computer, insert the supplied software CD.Installation starts.2 Follow the instructions on the computer to install the TwonkyMedia™ Server.Congure a PC to share musicYou can share music from a PC with the NP2500. This chapter shows you how to congure the PC to share music.1 Follow the instructions in chapter Install the TwonkyMedia™ Server (see ‘Install Twonky Media Server’ on page 20).2 On the PC, click Start > Programs > TwonkyMedia™ Server > Run TwonkyMedia™ Server. 3 Click the TwonkyMedia™ Server icon in the task bar.4 Choose TwonkyMedia™ Settings.5 In the Basic Setup of the Conguration Page, click on Sharing.The content directories are scanned.To manually locate the music, click Browse.To manually add a new content directory, click Add new content directory.To save the changes, press Save Changes. 1 On the remote control of the NP2500, press HOME.2 Select [Music] and conrm with OK.The display shows [Searching for UPnP music servers…], followed by the list of media servers.3 Press to select the server name and conrm with OK.TipThe TwonkyMedia™ sharing page lets you set the rescan behavior of the server. The default setting is -1 minute, which ensures auto-scan.•»»•••»EN
21Internet radioNoteInternet radio features require broadband Internet access.•Listen to Internet radio1 Turn on the NP2500.2 Ensure that the NP2500 is connected to broadband Internet.3 Press INTERNET RADIO to view the options menu[Search] (lets you search for Internet radio stations)[Favorite stations] (lists the Internet radio stations that you have marked as Favorite Station)[All stations] (lists all Internet radio stations, categorized by genres)[Recommended stations] (lists recommended Internet radio services stations)[My Media] (lists the Internet radio stations that you have entered at Club Philips under Streamium Management)4 Press to select the option, then press OK.To listen to a specic Internet radio station, select option [Search], then use the alphanumeric buttons to enter the radio station name.Press HOME to go to the Home menu.NoteClub Philips lets you select and manage favorite stations from a list of available Internet radio stations under Streamium Management.Internet radio features require broadband Internet access.•••••••••Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. This is how to use the alphanumeric search feature:1 Turn on the NP2500.2 Press MUSIC.The display shows the available servers.3 Select the server.The display shows the available lists.4 Select the list.5 Press SEARCH.The display shows a text box.6 Press the alphanumeric buttons on the remote control to enter the search word.7 Press OK to start the search.The NP2500 shows the closest alphabetical match.8 To stop the search, press .Press HOME to go to the Home menu.••••••»»»»•Install Twonky Media Server EnglishEN
22NoteInternet radio features require broadband Internet access.•Remove a Favorite StationYou can remove Internet radio stations from your Favorites:1 While listening to an Internet radio station that is bookmarked as a Favorite, press CLEAR.The current station is no longer bookmarked as a Favorite.NoteInternet radio features require broadband Internet access.•Manually add Internet radio stationsThis chapter explains how to register with Philips and add individual URL addresses for Internet radio stations on the PC.1 Ensure that the NP2500 is turned on.2 Ensure that the NP2500 is connected to the Internet.3 On the NP2500, select [Settings] > [Registration information] > [User registration].The registration display is shown.4 Press alphanumeric buttons on the remote control to enter your valid email address.5 Press OK.The display conrms the automated email dispatch to your mailbox.6 Check the email inbox for a message from ConsumerCare@Philips.com with the subject Your Streamium Registration....»»»Mark radio stations as FavoritesYou can mark Internet radio stations as your Favourites so next time you want to listen to a station, it is easy to nd.1 Turn on the NP2500.2 Ensure that the NP2500 is connected to broadband Internet.3 When you listen to Internet radio, press FAVORITE to mark the station.Press HOME to go to the Home menu.The next time you connect to the Internet radio, the radio station is shown in the Favorite Stations menu.NoteInternet radio features require broadband Internet access.•TipYou can also place bookmarks for Internet radio stations when you log on at www.philips.com/welcome and on the registered product site click the link Streamium Management.•Listen to Favorite StationsWhen you place bookmarks for Internet radio stations, you can nd them under Favorite Stations.1 Turn on the NP2500.2 Ensure that the NP2500 is connected to broadband Internet.3 Press INTERNET RADIO.4 Select [Favorite stations]. 5 Select the station.Press HOME to go to the Home menu.•••EN
23NoteThe feature My Media requires registration with Club Philips.Internet radio features require broadband Internet access.••Listen to Rhapsody® music servicesNoteThis feature requires broadband Internet access.This feature requires a Rhapsody® account.This feature is only available in some regions.•••Rhapsody® is an on-line music service that offers streaming on-demand access to its library of digital music. You can use this online service with your NP2500.Available features can include:[My Library] (built from your Rhapsody Music Library)[Channels] (lets you select virtual Internet radio channels with different genre options and other features)[Search] (lets you search for music in the Rhapsody Music Library)[Music guide] (guides you through the Rhapsody Music Services)[My Rhapsody] (featuring items such as customized albums, dynamic playlist, ratings and history)[Playlists] (lets you create and select your own playlists)[Account management] (helps you manage your Rhapsody Account)1 Ensure that the NP2500 is turned on.2 Ensure that the NP2500 is connected to the Internet.3 Press HOME.4 Select [Music Services] > [Rhapsody].5 Follow the on-screen[Rhapsody] instructions to select the services available to you.••••••••7 Follow the instructions in the email to complete your registration process on the Philips website.8 On the registered product site, click the link Streamium Management.9 Select My Media.10 Click on the tab Music.11 Enter the URL address of Internet radio station in the rst column.12 Enter a nickname in the second column.The nickname is the Internet radio stations identication that is displayed the NP2500.13 Enter a description in the third column.14 Click on Save to conrm your entries.NoteIf the manually added Internet radio station is available and broadcast in a compatible format, you can listen to it on the NP2500. You can nd the manually added Internet radio stations in the My Media list on the NP2500.Internet radio features require broadband Internet access.•••Listen to My MediaWhen you manually add an Internet radio station, the Internet radio station is found under [My Media].1 Turn on the NP2500.2 Ensure that the NP2500 is connected to broadband Internet.3 Press INTERNET RADIO.4 Select [My Media].The display shows the list of Internet radio stations stored under [My Media].5 Press OK to start play.Press HOME to go to the Home menu.»»•Install Twonky Media Server EnglishEN
24[Account Management] instructions to sign in with a full account.6 Press or , then OK to select.To return to the Home menu, press HOME.NoteThe on-line Rhapsody® services that are available depend on the type of account you hold.Rhapsody® and the Rhapsody logo are registered trademarks of RealNetworks, Inc.••Rate Rhapsody® musicYou can use the remote control to rate the music.1 While you navigate through Rhapsody® music on the NP2500, press RATE to rate the current track in the display.The selected rating is indicated in stars.Press HOME to go to the Home menu.NoteThe on-line Rhapsody® services that are available depend on the type of account you hold.•••»»EN
252 Select [Repeat] or[Shufe].3 Select your option and conm.Sound settingsThe sound settings of the NP2500 offer the following options:Equalizer (see ‘Equalizer settings’ on page 25)Equalizer settingsYou can choose between the following equalizer options:[FullSound]*[Dynamic Bass Boost][Rock][Pop][Jazz][Classic][Off]1 Press SETTINGS, to go to the Settings menu.2 Select [Sound settings] > [Equalizer].3 Select a menu option and conrm.Note* The FullSound™ feature requires that all sound processing features and equalizer settings of connected stereo systems are disabled or neutralized.•Display settingsThe display settings of the NP2500 offer the following display illumination options:Brightness when the NP2500 is turned on. (see ‘Brightness settings when the NP2500 is turned on’ on page 26)•••••••••••8 SettingsThe following settings are available to you:[Play mode][Sound settings][Display settings][Album art][Clicker sound][Clock settings][Network settings][Location and time zone][Language][User registration][Check for software upgrades][Demo mode][Information][Call centre numbers][Restore factory settings]This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.This is how you change settings:1 Turn on the NP2500.2 Press SETTINGS.3 Select menu option and conrm.Play modeThe NP2500 offers play mode options that can be toggled with buttons on the remote control.Shufe play (see ‘Shufe play’ on page 19)Repeat play (see ‘Repeat play’ on page 19)You can also change the play mode options in the Settings menu:1 Press SETTINGS, to go to the Settings menu.•••••••••••••••••••••Settings EnglishEN
26Album artThe NP2500 can display album art as a background or as a thumbnail in the music play screen. Album art must be available to be displayed. For albums without available album art, the NP2500 displays a default icon. You can toggle the album art display on or off:1 Press SETTINGS, to go to the Settings menu.2 Select [Album art].3 Highlight the option, then press OK.Clock settingsThe NP2500 has a clock with alarm functions. The clock must be set for the alarm function to be functional. This is how to set the clock:1 Press SETTINGS, to go to the Settings menu.2 Select [Clock settings] > [Date and time], to enter the date and time settings.3 You can select the following options:[Current date and time] > [Automatic (Internet)], to sync the time automatically via the Internet (requires Internet connection).[Current date and time] > [Manual], to set the time manually.To set the date and time manually:1 Press or to adjust the setting.2 Press OK to conrm.In the date and time settings, you can set the following formats:[Time format] - Set your option in the time format sub-menu.[Date format] - Set your option in the date format sub-menu. [Daylight saving time] - Mark the box to select this option.•••••Brightness when when the NP2500 is switched to standby. (see ‘Brightness settings when the NP2500 is switched to standby’ on page 26)Brightness settings when the NP2500 is turned onYou can choose between the following brightness ‘when on’ settings:[BRIGHT][DIM]1 Press SETTINGS, to go to the Settings menu.2 Select [Brightness when on].3 Select a menu option and conrm.Brightness settings when the NP2500 is switched to standbyYou can choose between the following brightness ‘when standby’ settings:[BRIGHT][DIM][Off]1 Press SETTINGS, to go to the Settings menu.2 Select [Brightness when standby].3 Select a menu option and conrm.Clicker soundThe NP2500 can give you an audible feedback (clicker sound) every time you press a button on the remote control. You can toggle the clicker sound on or off:1 Press SETTINGS, to go to the Settings menu.2 Select [Clicker sound].3 Highlight the option, then press OK.••••••EN
27Manual entry of your encryption key (for encrypted network connections only)Wired (Ethernet) network connection with automatic IP address (see ‘Wired connection with automatic IP address’ on page 29)This setup requires the following:A cable modem or PC with broadband Internet access and a free Ethernet portAn Ethernet cable (sold separately).Wired (Ethernet) network connection with static IP address (see ‘Wired connection with static IP address’ on page 29)This setup requires the following:A cable modem or PC with broadband Internet access and a free Ethernet portAn Ethernet cable (sold separately).Manual entry of your IP address.Wireless connection with automatic IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.»•»»»•»»»»•••••••Alarm settingsThe NP2500 has an alarm function. The clock must be set for the alarm function to be functional. This is how to set the alarm:1 Press SETTINGS, to go to the Settings menu.2 Select [Clock settings] > [Alarm], to enter the alarm settings.3 You can select the following options:[Alarm off] (default)[Music][Buzzer]To set the alarm time:1 Press or to adjust the setting.2 Press OK to conrm.Network settingsYou can choose between different setups. This manual explains the following options:Wireless network connection with automatic IP address (see ‘Wireless connection with automatic IP address’ on page 27)This is the most common network setup.This setup requires the following:A wireless access point or wireless router with broadband Internet accessManual entry of your encryption key (for encrypted network connections only)Wireless network connection with static IP address (see ‘Wireless connection with static IP address’ on page 28)This setup requires the following:A wireless access point or wireless router with broadband Internet accessManual entry of your IP address.••••»»»»•»»»Alarm settings EnglishEN
28Wireless connection with static IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wireless setup with static IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.1 Ensure that your network name and network password or encryption key are available.2 Turn on your wireless access point or wireless router with broadband Internet access.3 Turn on the NP2500.4 Press SETTINGS, to go to the Settings menu.5 Select [Wireless (WiFi)] to start the network setup process.••••••••To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wireless setup with automatic IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.1 Ensure that your network name and network password or encryption key are available.2 Turn on your wireless access point or wireless router with broadband Internet access.3 Turn on the NP2500.4 Press SETTINGS, to go to the Settings menu.5 Select [Wireless (WiFi)] to start the network setup process.The NP2500 searches for networks.6 Select your network from the list of found networks and conrm.Enter the encryption key (if required) and conrm.The NP2500 acquires the automatic IP address.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.7 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.NoteYou can enter more than one encryption key. In this case, the NP2500 prompts you to select the default encryption key.••»••••»EN
29To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of the NP2500 (see ‘Rear view’ on page 8) and the Ethernet jack of the wired router.2 Ensure that the wired router is turned on and has broadband Internet access.3 Turn on the NP2500.4 Press SETTINGS, to go to the Settings menu.5 Select [Wired (Ethernet)] to start the network setup process.The NP2500 acquires the automatic IP address.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.6 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.Wired connection with static IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.••»»»»••The NP2500 searches for networks.6 Select your network from the list of found networks and conrm.Enter the encryption key (if required) and conrm.The NP2500 tries to acquire an automatic IP address.7 Press BACK to enter your IP address manually.8 Enter your static IP address and conrm.The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.9 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.NoteYou can enter more than one encryption key. In this case, the NP2500 prompts you to select the default encryption key.•Wired connection with automatic IP addressThis is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.»••»»»••••••Wired connection with static IP address EnglishEN
30The NP2500 shows the conrmation for the connection to the network.The NP2500 shows the prompt for the connection to the Internet.7 Select [Yes] to connect to the Internet.The NP2500 shows the conrmation for the connection to the Internet.Location and time zoneThis is how you can change the location and time zone settings of the NP2500:1 Press SETTINGS, to go to the Settings menu.2 Select [Location and time zone].3 Select a menu option and conrm.The NP2500 applies the new location and time zone settings.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.LanguageThis is how you can change the language of the display:1 Press SETTINGS, to go to the Settings menu.2 Select [Language].3 Select a menu option and conrm.The display language changes to the new setting.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.»»»»»»»»»Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. The onscreen display guides you through the process of connecting the NP2500 to your home network and the Internet. This section describes the typical wired setup with static IP address. You can also follow the onscreen prompts for advanced congurations that are not described in this manual.1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of the NP2500 (see ‘Rear view’ on page 8) and the Ethernet jack of the wired router.2 Ensure that the wired router is turned on and has broadband Internet access.3 Turn on the NP2500.4 Press SETTINGS, to go to the Settings menu.5 Select [Wired (Ethernet)] to start the network setup process.The NP2500 tries to acquire an automatic IP address.Press BACK to enter your IP address manually.6 Enter your static IP address and conrm.••••••»»EN
31Press BACK to go back to the previous screen.Press HOME to go to the Home menu.This is how you can unregister the NP2500 with Philips:1 Press SETTINGS, to go to the Settings menu.2 Select [Unregister].The NP2500 prompts you to conrm.3 Conrm to unregister.The item shows a conrmation that the NP2500 is unregistered with your email account.Registration informationThis is how you can check the registration status of the NP2500:1 Press SETTINGS, to go to the Settings menu.2 Select [Registration information].The NP2500 shows the registration information.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.Check for software upgradesThis is how to navigate and select with the remote control:Press or to select a menu option.Press to conrm a selection.Press OK to conrm an alphanumeric entry.Press HOME to go to the Home menu.This is how you can check for software updates for the NP2500:1 Ensure that the NP2500 is connected to the Internet.••»»»»»••••Register the NP2500Registration of the NP2500 requires a valid email address and mailbox access.This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.The alphanumeric buttons of the remote control are multi-function buttons:To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of the NP2500.To cycle through the alphanumeric characters that are available, press a button repeatedly.To delete the last character entry from the display, press CLEAR.To delete the whole last line entry from the display, press and hold CLEAR. This is how you can register the NP2500 with Philips:1 Press SETTINGS, to go to the Settings menu.2 Select [Register now].The item prompts you to enter a valid email address.3 Enter your email address and conrm.The item shows a conrmation and prompts you to check the inbox of your email account.Unregister the NP2500This is how to navigate and select with the remote control:Press or to select a menu option.Press OK to conrm a selection.••••••••»»••Wired connection with static IP address EnglishEN
32Demo modeYou can access the demo mode in the Settings menu:1 Press SETTINGS, to go to the Settings menu.2 Select [Demo mode].The demo plays continuously until you exit the demo play.3 To exit the demo play, press .TipYou can start the demo play more quickly with the DEMO button on the remote control.•Call center numbersThis is how you can nd the call center numbers:1 Press SETTINGS, to go to the Settings menu.2 Select [Call centre numbers].3 Press OK to conrm.The call center numbers are shown on the display of the NP2500.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.Restore factory settingsCautionThe following procedure erases all custom settings and resets the NP2500 to the original status as set by the factory.•This is how to restore the factory settings of the NP2500:»»»»2 Press SETTINGS, to go to the Settings menu.3 Select [Check for software upgrades] and conrm.The NP2500 checks for a new software version.4 Read the information shown in the display of the NP2500.New software is available for the NP2500:1 Follow the instructions shown in the display to complete the update.The NP2500 prompts you to accept the conditions and download of the software.The NP2500 restarts after the update.NoteMandatory updates do not require your acceptance or conrmation.•The NP2500 already has the latest software installed:Press BACK to go back to the previous screen.Press HOME to go to the Home menu.InformationThis is how you can nd information about the NP2500:1 Press SETTINGS, to go to the Settings menu.2 Select [Information].3 Press OK to conrm.The device information is shown on the display of the NP2500.Press BACK to go back to the previous screen.Press HOME to go to the Home menu.»»»••»»»EN
331 Press SETTINGS, to go to the Settings menu.2 Select [Restore factory settings].3 Select [Yes] to reconrm.The NP2500 restarts.The factory settings of the NP2500 are restored.»»Maintenance EnglishEN
349 MaintenanceThis chapter tells you how to care for your NP2500.CleaningNoteAvoid moisture and abrasion.•1 Clean the NP2500 only with a soft dry cloth. EN
35WirelessWireless standard802.11g, backwards compatible to 802.11bWireless securityWEP (64 or 128 bit),WPA/WPA2 (8-63 characters)Frequency range2412 - 2462 MHz (CH1-CH11) (for /79, /37, /55, /97)2412 - 2472 MHz (CH1-CH13) (for /12, /05)Antenna 2x internal, diversity mode enabledWired (LAN / Ethernet)Wired standard 802.3 / 802.3 uSpeed 10 / 100 MBit/sMode half / full duplexCrossover detection (Auto MDIX)Yes (Auto MDIX)Decoding capabilitiesMP3 8 - 320 kbps (CBR / VBR)WMA 32 - 192 kbps (CBR / VBR)AAC (M4A) 16 - 320 kbps (CBR / VBR)PCM 1x (1.4 Mbps)FLAC SupportedOgg Vorbis SupportedPlaylist support*.m3u, *.wpl SupportediTunes Supported (via by-packed TwonkyMedia™)Display / ClockResolution Dot matrix 320 x 240 dtos (QVGA)Color TFTSize 3.5 inchesBacklight On / Off / DimmedTime / Date display SupportedAutomatic time sync via Internet (NPT)SupportedSleep timer SupportedKey sound feedback Clicker (internal)10 Technical dataGeneralAC Power Voltage information is printed on the back or the underside of the NP2500.DC Power 5 V / 1 ADimensions (w x h x d)252.5 x 99 x 34 mmWeight (net) Main unit: ~ 0.46 kgPower consumptionOn < 5 WStandby (active) < 4 WECO (passive) standby < 1 WAudio outputLine out 2x cinch, 500 mV (output level can be adjusted), 20 - 20,000 HzSPDIF 1x chinch (coax), 0.5 V, 75 ΩHeadphones 1x 3.5 mm jack30 - 18,000 Hz16 - 150 ΩSignal to noise ratio (line out)typically 85 dBA (IEC)Signal to noise ratio (headphones)typically 85 dBA (IEC)Distortion (line out / headphones)< 0.15 %Audio inputAux in (line in) 2x cinchInput sensitivity 500 mVInput impedance > 10 kΩTechnical data EnglishEN
36500MB free hard disk space•Specications and external appearance are subject to change without notice.Supported audio le formatsThe NP2500 supports the following audio le formats:MP3 (8-320kbps and VBR)WMA (up to 192kbps)non DRM protected AAC (M4A) (16-320 kbps and VBR16)PCM (1.4 Mbps)FLACOgg VorbisNoteThe display of the NP2500 supports directories with nesting up to a maximum of 8 levels.•Supplied accessoriesRemote control2 AAA batteriesAC power adapter with cableRCA cableComputer connection requirementsThe minimum requirements for computer connections are:Windows 2000 SP4 (or above) / XP SP2 / Vista / MacPentium III 500MHz processor or higher256MB RAMCD-ROM driveAdapterEthernet enabled (for wired connection)Wireless network 802.11 b/g (for wireless connection)•••••••••••••••••EN
37Change the operating channel on the interfering devices.Turn the devices in different directions to minimize interference.The wireless rmware update failed, what do I do?1 Ensure that the PC is connected to the Internet. 2 Use an Ethernet cable (sold separately) to connect the NP2500 to the PC.3 On the PC, launch the Device Manager on the PC to update the rmware. ••11 TroubleshootingI cannot hear any sound or the sound is poor, what do I do?Press + VOL - to increase the volume.Press the MUTE button again to reactivate the sound output.Check that the RCA cable is connected correctly.Check that you have selected ‘Aux in’ as the source on the connected stereo system.Check if the volume control of the connected stereo system is adjusted correctly.Is there a maximum distance of transmission between a wireless router and the NP2500 for effective streaming?Yes. The maximum distance of Wi-Fi transmission is 250m measured in open spaces. However, in a home environment, where solid obstacles such as walls and doors are present, the effective transmission distance is reduced to 50-100m. Reposition the devices if you experience transmission problems.I have not received any registration email from ConsumerCare@Philips.com.Check that the email address that is entered in the user registration section is valid and spelled correctly.Check that the PC has an active Internet connection.The Internet server may be busy, try again later.Check if the email was redirected to the spam folder.How do I avoid Wi-Fi interferences from other devices that operate in the same (2.4GHz) frequency spectrum, such as Dect phones or bluetooth devices?Move the NP2500 at least 3m away from such devices.Use a WEP/WPA encryption key when you create the wireless connection your PC / home network.•••••••••••Glossary EnglishEN
38AUXAuxiliary input that allows you to connect portable audio devices.BBassThe lowest three octaves of the audio band. Low bass is the bottom octave (20-40Hz), mid-bass is the middle octave (40-80Hz), and upper bass is the 80-160Hz octave. Bit / bitsA bit is a binary digit, taking a value of either 0 or 1. For example, the number 10010111 is 8 bits long.Bit rateBit rate is the number of bits that are conveyed or processed per unit of time. The bit rate is usually measured in some multiple of bits per second (kilobits per second: kbps). The term bit rate is a synonym for data transfer rate (or simply data rate). CCBR (constant bit rate)With CBR the encoder spends the same amount of bits on each frame, regardless of how much it may really need. Disadvantage of CBR: Bits are wasted in case of absolute blackness of a picture or complete silence in an audio frame. And pictures or audio frames with a lot of elements may need those bits. CDDBA centralized database of CDs, CD tracks, and artists on the Web, now known as Gracenote. The audio player or burner program can log on to CDDB. It uploads the ID of the CD being played, and then downloads the title, artist, and track list.CoaxialA single copper conductor, surrounded with a layer of insulation, covered by a surrounding copper shield and nally, an insulating jacket. An unbalanced transmission line with constant 12 GlossaryAAAC (Advanced Audio Coding)An audio compression scheme dened as part of the MPEG-2 standard (also known as MPEG-2 AAC or MPEG-2 NBC, or Not Backwards Compatible). It offers better sound and a compression ratio that is superior by roughly 30 percent compared to the MPEG-1 MP3 format.AC (alternating current)An alternating current is an electrical current whose magnitude and direction vary cyclically, as opposed to DC (direct current), whose direction remains constant. The usual waveform of an AC power circuit is a sine wave, as this results in the most efcient transmission of energy. However certain applications use different waveforms, such as triangular or square waves.Album artAlbum art is a feature of the NP2500 that displays the artwork (cover picture) of a music album. This display enables the user to quickly identify a music album. The artwork les for music albums can be downloaded from the Internet.AmplierA device, either a single stage or a large scale circuit with multiple stages for creating gain, i.e. it makes small signals larger.AntennaA device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal.Audio outputHigh-level (speaker) or line-level (RCA) signals sent from one system component to another; or the high-level signal from an amplier to the system speakers.EN
39in full-duplex mode, it can transmit data in two directions simultaneously. In half-duplex mode it can transmit data in two directions, but not simultaneously.EEncryption keyAn encryption key is an alphanumeric series that enables data to be encrypted and then decrypted so it can be safely shared among members of a network.FFrequencyThe property or condition of occurring at frequent intervals. In sound, this simply refers to the regular occurrence of compression and rarication of air that we experience as sound. Frequency ResponseIs the range of frequencies that a speaker reproduces, lowest frequency to the highest. While the optimal normal is 20-20,000 Hz (Hertz), the range of human hearing for individuals is often much more restricted. A good full-range speaker system however, reproduces as much of this range as possible to cover all variations. Individual drivers are limited to reproduce only that part of the spectrum for which they were made, so their response is limited, but still a necessary point to consider when designing a complete sound system.FullSoundFullSound™ is an innovative technology designed by Philips. FullSound™ faithfully restores sonic details to compressed music, enhancing it to provide a full sound experience without any distortion. HHz (Hertz)Cycles per second, named after Heinrich Hertz.impedance. In audio, this type is commonly used for low level, line signals terminated in RCA connectors.CompressionIn audio terms, this is a process of temporarily or permanently reducing audio data for more efcient storage or transmission. A temporary reduction in le size is called ‘non-lossy’ compression, and no information is lost. A permanent reduction in le size (such as with MP3 les) is called ‘lossy’ compression, and involves discarding unnecessary information which is irretrievably lost.DDC (direct current)Direct current or continuous current is the constant ow of electric charge. This is typically in a conductor such as a wire. In direct current, the electric charges ow in the same direction, distinguishing it from AC (alternating current).Decibel (dB)A unit of measure used to express relative difference in power or intensity of sound.DHCPDHCP stands for Dynamic Host Conguration Protocol. It is a protocol for assigning dynamic IP addresses to devices on a network. DigitalA method to encode information using a binary code of 0s and 1s. Many wireless phones and networks use digital technology.Digital AudioDigital Audio is a sound signal that has been converted into numerical values. Digital sound can be transmitted through multiple channels. Analog sound can only be transmitted through two channels.Duplex (half/full)Full duplex is the ability to send and receive data simultaneously. Duplex is synonymous with full duplex. Example: when a modem operates Glossary EnglishEN
40MM4AThe audio le format used by Apple in their iTunes Music Store often appears on your system with the ‘.m4a’ lename extension. M4A can produce better audio quality than MP3 using less physical space for the les.MHz (Mega Hertz)One million cycles per second.Mono (monaural)The operation of an amplier in one channel for both input and output. Can refer to an amplier with only one channel of amplication or operating in bridged mode. For low-frequency amplication applications, it provides better phase coherence and less distortion than stereo operation.MP3A le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. MuteA control found on receivers, and some mixers or signal processing units that silences (mutes) a signal path, or output.OOhmMeasure of resistance to current (impedance). The lower the impedance of a speaker, the harder it is to drive.PPCM (Pulse Code Modulation)Pioneering form of digital recording.IImpedanceThe resistance to the ow of an electric current in a circuit. This is effectively the electrical load that a loudspeaker presents to the amplier which drives it and is measured in ohms.Input sensitivitySPL (sound pressure level) a speaker produces, given one watt of power, measured from a one-meter distance at a typical input frequency (usually 1kHz unless otherwise noted on the speaker). InterfaceA device or protocol which facilitates the linking of any two devices or systems; or when used as a verb (‘to interface’), the process of linking.IP addressAn IP (Internet Protocol) address is a unique computer address that enables electronic devices to communicate with and identify each other.KKbpsKilobits per second. A digital-data-rate measurement system which is often used with highly compressed formats such as AAC, DAB, MP3 etc. The higher the amount, the better the quality generally is.Kilo Hertz (kHz)1000Hz or 1000 cycles per second.LLCD (Liquid Crystal Display)Probably the most common way to show visual information on non-computer electronic equipment.Lossless compressionA system for reducing the number of data bits (density) in a musical signal without corrupting the original.EN
41Theoretically, 0 dB SPL is the threshold of human hearing while approximately 120 dB is the threshold of pain.StereoLiterally means solid. Usually taken to refer to two channel stereo, though developments in digital audio facilitate multichannel stereo.StreamingA technique for transferring data such that it can be processed as a steady and continuous stream. Streaming technologies are often used on the Internet because many users do not have fast enough access to download large multimedia les quickly, so the client browser or plug-in can start displaying the data before the entire le has been transmitted.SuperPlaySuperPlay™ is a special feature of the NP2500, which enables the listener to play all the music under a top-level library category, such as artists or albums, without having to select playlist items. TThumbnailA thumbnail is reduced-size versions of a picture that is used to make it easier to recognize an them. Thumbnails serve the same role for images as a normal text index does for words.TwonkyMediaTwonkyMedia™ is a media server that enables wireless streaming from a computer to the NP2500.TwonkyMedia™ is a registered trademark of Packet Video™ Corporation. All rights reserved. © Packet Video Corporation, 10350 Science Center Drive, San Diego, California, USA.UUPnP (Universal Plug and Play)Universal Plug and Play is a networking architecture developed by a consortium of companies to ensure easy connectivity between Proxy serverA computer network service that allows clients to make indirect network connections to other network services.RRF (radio frequency)An alternating current or voltage with a frequency (or carrier wave) above about 100kHz. It is called radio frequency because these frequencies have a capacity to be radiated as electromagnetic waves by radio (and television) stations.Rhapsody®Rhapsody® is an on-line music service that offers streaming on-demand access to its library of digital music. SS/PDIF (SPDIF) (Sony/Philips Digital Interface)A standard audio-le transfer-format that was developed jointly by Sony and Philips. S/PDIF allows the transfer of digital audio signals from one device to another, without the need to convert rst to analog. This prevents the quality of the digital signal degrading during transfer to analog.SensitivityVolume that a speaker offers for a specic voltage input, expressed in decibels per watt (dB/W).ShufeA feature that plays audio les (tracks) in random order.Signal to noise ratioRepresents the difference between the level of the audio signal, and any interference. The larger the gure, the purer the sound.SPL (sound pressure level)An acoustic measurement of sound energy. 1 dB SPL is the smallest increment in sound level to which the average human is sensitive. Glossary EnglishEN
42Korea 080-600-6600Luxembourg 40 6661 5644Malaysia 1800-880-180Mexico 01-800-504-6200Netherlands 0900-8407 (€0.20/min)New Zealand 0800-658-224Norway 2270-8111Pakistan 051-580-902-3Peru 0800-00100Philippines 632-8164416Poland 223491504Portugal 2-1359-1442Romania 1-203-2060Russia Federation 495-961-1111; (8-800-200-0880)Singapore 65-6882-3999Slovakia 0800-004537South Africa (011) 471-5194Spain 902-888-784 (€0.10/min)Sweden 08-5792-9100Switzerland 0844-800-544Taiwan 0800-231-099Thailand 66-2-652-8652Turkey 0800-261-3302Ukraine 044-254-2392United Kingdom 0870 900 9070 (£0.15/min)Uruguay (598-2) 619-6666Venezuela 0800-100-4888Contact informationCanada (Francophone) 1-800-661-6162United States and Canada (English and Spanish speaking) 1-888-744-5477Argentina (54-11) 4544-2047Australia 1300-363-391Austria 810000205 (€0.20/min)Belgium 78250145 (€0.16/min)Brazil 0800-701-02-03Bulgaria 2-976-9996Chile 600-744-5477 (600-PHILIPS)China 4008-800-008 (local tariff)Colombia 01-800-700-7445Czech Republic 800142840Denmark 3525-8759Finland 09-2311-3415France 0821 611655 (€0.23/min)Germany 01803 386 852 (€0.14/min)Greece 0-0800-3122-1280Hong Kong 852-2619-9663Hungary 680018189India 1901-180-1111Ireland 01-601-1777Israel 9-9600-900Italy 840320086 (€0.25/minute)Japan 0570-07-6666
Streamium terms and conditionsTerms and Conditions of Use of your Philips Streamium-enabled DeviceCongratulations on your purchase of a Philips Streamium-enabled Device (“Device”).These Terms andConditions of Use give you the rights to use certain features on your Device relating to the streaming ofcontent. You must agree to these Terms and Conditions of Use before using the Device.Your use of the Deviceconstitutes your agreement to be bound by these Terms and Conditions of Use and will give you the right toaccess these features. If you do not agree to these Terms and Conditions of Use, you may return your Deviceto the point of purchase.These Terms and Conditions of Use supplement, and do not replace, any terms,conditions or disclaimers which were provided with your purchase of the Device.All such terms, conditionsand disclaimers remain in full force and effect.Eligibility for Registration.You must be at least 14 years of age to assume the responsibilities of these Terms and Conditions of Use. If youare under 14 years of age, you may not use the Device unless one of your parents or legal guardians assumesthe responsibilities of these Terms and Conditions of Use.Your use of the Device constitutes yourrepresentation that you are either 14 years of age or, if you are under 14 years of age, that your parent or legalguardian has assumed the responsibilities of these Terms and Conditions of Use.Restrictions on Modification of your DeviceYour Device provides access to certain streams of content.As a condition of obtaining access to those streamsthrough the Device, you agree not to tamper with or otherwise modify or attempt to modify the Device in anyway (including through the use of software or by making physical alterations to the Device).You agree that youwill not circumvent or attempt to circumvent technological measures employed to control access to, or therights in, any content.You agree that you will not circumvent or attempt to circumvent any copy managementsystem by any means.You agree that you will not decipher or attempt to decipher cryptographic keys orotherwise defeat or attempt to defeat any security features implemented in the Device or in the contentstreams.You agree that you will not use the Device for any unauthorized purpose or in contravention of anylaw or regulation.Disclaimers Regarding ContentThe streams of content which are accessible through your Device are not controlled or programmed byPhilips. Rather, they are provided by third parties.Think of your Device (in addition to its other features) as aform of “tuner” which allows you to receive the content broadcast by many others outside of your local area.Since the content is provided by others, PHILIPS HAS NO EDITORIAL CONTROL OVER ANY OF THATCONTENT RECEIVED THROUGH YOUR DEVICE AND,THEREFORE IS NOT LIABLE FOR CONTENT ORITS NATURE OR DELIVERY. PHILIPS DOES NOT ENDORSE ANY OPINIONS EXPRESSED IN ANYCONTENT RECEIVED THROUGH YOUR DEVICE. PHILIPS DOES NOT GUARANTEE THE TRUTHFULNESS,ACCURACY, RELIABILITY, COMPLETENESS OR TIMELINESS OF CONTENT.YOU AGREE THAT ANYRELIANCE ON CONTENT IS AT YOUR OWN RISK.Limitations on Access to Streams.Philips does not guarantee access to any particular stream or to the content contained in any stream. Philipsmay, in its discretion, add or remove access to any specific stream or content at any time. Some streams areaccessible through arrangements with online service providers which determine which streams are listed ontheir directories.Although Philips will strive to provide a good selection of online service providers, Philipsdoes not guarantee continued access to any specific online service provider. Philips may, in its discretion, add orremove access to any specific online service provider.Rights in ContentContent may be protected by copyright laws or other intellectual property or proprietary laws. In somesituations, such as use of the Device in a commercial environment, it may be necessary for you to obtain, atyour own risk, a license or other authorization to use such content.You agree that, in the event such a license
or authorization is necessary, it is your responsibility to obtain any such license or authorization.You agree thatyou are solely liable for any damages you may incur resulting from your failure to obtain the proper license orauthorization for use of the content accessible through the Device.You agree that Philips will have no liabilityto you with regard to your use of the content.Changes in FeaturesPhilips may, in its discretion, change the features of the Device, including adding features to, or removingfeatures from, the Device. Some new features may require changes to these Terms and Conditions of Use.Youruse of those new features will constitute your agreement to the revised Terms and Conditions of Use.Software and Intellectual Property RightsYou may need to use certain software programs to use or have full access to certain features of the Device.You received certain software with the purchase of the Device and may receive other software from time totime in the future. Most of that software is contained in the Device and is not accessible to you. Some of thatsoftware is owned by Philips and some is owned by others.Your use of software owned by Philips is subject tothese Terms and Conditions of Use and any applicable license agreement.Your use of software owned by othersis governed by their applicable license agreements.Your use of software does not transfer any title orownership rights in the software to you. Philips retains all its rights in software and other intellectual property,including copyrights, patent rights, and rights in its trademarks and trade names.You agree that you will notdisassemble, decompile, create derivative works of, reverse engineer, modify, sublicense, distribute the softwareor use the software for any unauthorized purpose or in contravention of any law or regulation.Warranty DisclaimerPHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,THAT THE DEVICE WILLMEET YOUR REQUIREMENTS OR THAT THE USE OF THE DEVICE WILL BE UNINTERRUPTED,TIMELY,SECURE OR FREE FROM ERRORS. PHILIPS MAKES NO WARRANTY AS TO THE CONTENT CARRIED INANY STREAM. PHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,AS TO THEINFORMATION OR CONTENT ACCESSED THROUGH YOUR DEVICE OR TO YOUR RELIANCE ON, ORUSE OF,ANY INFORMATION OR CONTENT ACCESSED THROUGH YOUR DEVICE. SPECIFICWARRANTIES WERE PROVIDED WITH YOUR PURCHASE OF YOUR DEVICE AND THOSE WARRANTIES,INCLUDING ANY DISCLAIMERS TO THOSE WARRANTIES, CONTINUE TO APPLY. Because somejurisdictions do not permit the disclaimer of implied warranties, such disclaimers may not apply to you.Limitation of LiabilityPHILIPS WILL NOT BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, INCIDENTAL,PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR LOST SAVINGS)OR FOR LOSS OF DATA OR BUSINESS INTERRUPTION ARISING OUT OF OR RELATING TO YOUR USEOF THE DEVICE WHETHER OR NOT SUCH DAMAGES ARE BASED ON TORT,WARRANTY, CONTRACTOR ANY OTHER LEGAL THEORY - EVEN IF PHILIPS HAS BEEN ADVISED, OR IS AWARE, OF THEPOSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL PHILIPS CUMULATIVE LIABILITY FOR DAMAGE(FROM ANY CAUSE WHATSOEVER) EXCEED THE AMOUNT YOU PAID FOR YOUR DEVICE.Miscellaneous“This agreement will be governed by the laws of the jurisdiction in which the Device was sold and you herebyconsent to the non-exclusive jurisdiction of courts in the relevant country. If any provision of this agreement isinvalid or unenforceable under applicable law, such provision will be deemed modified to the extent necessaryto render such provision valid and enforceable and the other provisions of this agreement will remain in fullforce and effect.These Terms and Conditions of Use will not be governed by the United Nations Convention ofContracts for the International Sale of Goods, the application of which is hereby expressly waived.”BY USING YOUR DEVICE,YOU REPRESENT THAT YOU HAVE READ AND UNDERSTOOD THESE TERMSAND CONDITIONS OF USE AND THAT YOU ACCEPT THEM.
NOTICESOFTWARE END USER LICENSE AGREEMENTTHIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDINGAGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMERELECTRONICS B.V.A DUTCH LIMITED LIABILITY COMPANY,WITH ITS PRINCIPAL OFFICE ATGLASLAAN 2, 5616 LW EINDHOVEN,THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES(INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).THIS AGREEMENT GIVES YOU THE RIGHT TO USECERTAIN SOFTWARE (THE “SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONICFORM WHICH MAY HAVE BEEN PROVIDED SEPARATELY OR TOGETHER WITH A PHILIPS PRODUCT(THE “DEVICE”) OR A PC. BY DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE,YOU ACCEPT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THISAGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD,INSTALL OR OTHERWISE USE THE SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIAE.G. CD WITHOUT THE OPPORTUNITY TO REVIEW THIS LICENSE AND DO NOT ACCEPT THESETERMS,YOU MAY RECEIVE A FULL REFUND OF THE AMOUNT, IF ANY,THAT YOU PAID FOR THESOFTWARE IF YOU RETURN THE SOFTWARE UNUSED WITH PROOF OF PAYMENT WITHIN 30 DAYSFROM THE DATE OF PURCHASE.1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable licenseto install and use, on the Device or a PC, as applicable, one (1) copy of the specified version of the Software inobject code format as set out in the user documentation solely for your personal use.The Software is “in use”when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or theDevice.2. Ownership. The Software is licensed and not sold to you.This Agreement grants you only the right to usethe Software, but you do not acquire any rights, express or implied, in the Software other than those specifiedin this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including allpatents, copyrights, trade secrets, and other intellectual property rights incorporated therein.The Software isprotected by copyright laws, international treaty provisions, and other intellectual property laws. Therefore,other than as expressly set forth herein, you may not copy the Software without prior written authorization ofPhilips, except that you may make one (1) copy of the Software for your back-up purposes only.You may notcopy any printed materials accompanying the Software, nor print more than one (1) copy of any userdocumentation provided in electronic form, except that you may make one (1) copy of such printed materialsfor your back-up purposes only.3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign,loan, or otherwise transfer the Software.You shall not, and you shall not permit any third party, to reverseengineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibitsthe foregoing restriction.You may not remove or destroy any product identification, copyright notices, or otherproprietary markings or restrictions from the Software. All titles, trademarks, and copyright and restrictedrights notices shall be reproduced on your back up copy of the Software. You may not modify or adapt theSoftware, merge the Software into another program or create derivative works based upon the Software.4.Termination of certain functionality. The Software may contain components of certain licensedsoftware including software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’sdigital rights management technology for Windows Media. Content providers are using the digital rightsmanagement technology for Windows Media (“WM-DRM”) to protect the integrity of their content (“SecureContent”) so that their intellectual property, including copyright, in such content is not misappropriated. YourDevice may also use WM-DRM software to transfer or play Secure Content (“WM-DRM Software”). If the
security of such WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon therequest of the owners of Secure Content (“Secure Content Owners”)) the WM-DRM Software’s right toacquire new licenses to copy, store, transfer, display and/or play Secure Content. Revocation does not alter theWM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to yourPC and/or your Device whenever you download a license for Secure Content. Microsoft may, in conjunctionwith such license, also download revocation lists onto your Device on behalf of Secure Content Owners, whichmay disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content. Secure ContentOwners may also require you to upgrade some of the WM-DRM components distributed with this Software(“WM-DRM Upgrades”) before accessing their content. When you attempt to play Secure Content,WM-DRMSoftware built by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consentbefore the WM-DRM Upgrade is downloaded. WM-DRM Software built by Philips may do the same. If youdecline the upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade;however, you will still be able to access unprotected content and Secure Content that does not require theupgrade. WM-DRM features that access the Internet, such as acquiring new licenses and/or performing arequired WM-DRM Upgrade, can be switched off. When these features are switched off, you will still be able toplay Secure Content if you have a valid license for such content already stored on your Device. However, youwill not be able to use certain of the WM-DRM Software features that require Internet access such as theability to download content that requires the WM-DRM Upgrade. All title and intellectual property rights inand to the Secure Content is the property of the respective Secure Content owners and may be protected byapplicable copyright or other intellectual property laws and treaties. This Agreement grants you no rights touse such Secure Content. To summarize, if the Software contains Microsoft WM-DRM components– Secure Content you desire to download, copy, store, display, transfer, and/or play is protected bythe Microsoft WM-DRM components of the Software. Microsoft, Secure Content Owners, orSecure Content distributors may deny you access, or restrict your access, to Secure Contenteven after you have paid for, and/or obtained, it. Neither your consent nor the consent orapproval of Philips is necessary for any of them to deny, withhold or otherwise restrict youraccess to Secure Content. Philips does not guaranty that you will be able to download, copy,store, display, transfer, and/or play Secure Content.5. Open Source Software. (a) This software may contain components that are subject to open-sourceterms, as stated in the documentation accompanying the Device.This Agreement does not apply to thissoftware as such. (b) Your license rights under this Agreement do not include any right or license to use,distribute or create derivative works of the Software in any manner that would subject the Software to OpenSource Terms. “Open Source Terms” means the terms of any license that directly or indirectly (1) create, orpurport to create, obligations for Philips with respect to the Software and/or derivative works thereof; or (2)grant, or purport to grant, to any third party any rights or immunities under intellectual property orproprietary rights in the Software or derivative works thereof.6.Termination. This Agreement shall be effective upon installation or first use of the Software and shallterminate (i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii)upon destruction of all copies of the Software and related materials provided to you by Philips hereunder.Philips’s rights and your obligations shall survive the termination of this Agreement.7. Upgrades. Philips may, at its sole option, make upgrades to the Software available by general posting on awebsite or by any other means or methods. Such upgrades may be made available pursuant to the terms of thisAgreement or the release of such upgrades to you may be subject to your acceptance of another agreement.8. Support Services. Philips is not obligated to provide technical or other support (“Support Services”) forthe Software. If Philips does provide you with Support Services, these will be governed by separate terms tobe agreed between you and Philips.
9. Limited Software Warranty. Philips provides the Software ‘as is’ and without any warranty except thatthe Software will perform substantially in accordance with the documentation accompanying the Software for aperiod of one year after your first download, installation or use of the Software, whichever occurs first. Philips’entire liability and your exclusive remedy for breach of this warranty shall be, at Philips’ option, either (i) returnof the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does notmeet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limitedwarranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongfulapplication. Any replacement Software will be warranted for the remainder of the original warranty period orthirty (30) days, whichever is longer.This limited warranty shall not apply to you if theif the Software wasprovided to you free of charge on an evaluation only basis.10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND ITS LICENSORS DONOT WARRANT THAT THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILLMEET YOUR REQUIREMENTS.YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARETO ACHIEVE YOUR INTENDED RESULTS,AND FOR THE INSTALLATION OF, USE OF,AND RESULTSOBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,PHILIPS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS,WHETHER EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,AND ACCURACY OR COMPLETENESS OF RESULTS WITHRESPECT TO THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTYAGAINST INFRINGEMENT. PHILIPS DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD,COPY, STORE, DISPLAY,TRANSFER,AND/OR PLAY SECURE CONTENT.11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BELIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGESWHATSOEVER, INCLUDING,WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES,BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OROTHER PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PHILIPS’ OR ITS LICENSORS’ AGGREGATELIABILITY FOR DAMAGES ARISING OUT OF THIS AGREEMENT EXCEED THE GREATER OF THE PRICEACTUALLY PAID BY YOU FOR THE SOFTWARE OR FIVE TEN POUNDS STERLINGUS DOLLARS (510.00).12.Trademarks. Certain of the product and Philips names used in this Agreement, the Software, and theprinted user documentation may constitute trademarks of the Philips, its licensors or other third parties. Youare not authorized to use any such trademarks.13. Export Administration. You agree that you will not directly or indirectly, export or re-export theSoftware to any country for which the United States Export Administration Act, or any similar United Stateslaw or regulation requires an export license or other U.S. Government approval, unless the appropriate exportlicense or approval has first been obtained. By downloading or installing the Software you agree to abide by thisExport provision.14. Governing law. This Agreement is governed by the laws of your country of residence ,residence, withoutreference to its conflict of laws principles. Any dispute between you and Philips regarding this Agreement shallbe subject to the non-exclusive jurisdiction of the courts of your country of residence.15. General. This Agreement contains the entire agreement between you and Philips and supersedes any priorrepresentation, undertaking or other communication or advertising with respect to the Software and userdocumentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue infull force and effect.This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.
000000000000© 2008 Koninklijke Philips Electronics N.V.All rights reserved.Document order number: wk8375

Navigation menu