Philips Electronics Singapore KWR14A VIZIO VIA PLUS Remote Control User Manual Manual KWR144801 V02

Download:
Mirror Download [FCC.gov]
Document ID	1678655
Application ID	eUMUBfhKXZa+u8flDpPL1Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.44kB (505442 bits)
Date Submitted	2012-04-18 00:00:00
Date Available	2012-04-18 00:00:00
Creation Date	2012-04-12 14:42:38
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-04-12 14:42:38
Document Title	Microsoft Word - Manual-KWR144801-V02
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sgg04678

Philips Home Control
Manual Book
Model Number
Alternate
Model Number
Serial Number
(12NC)
Description
KWR144801/01
XRT700
3139 228 10141
VIZIO VIA PLUS (TV)
KWR144802/01
XRB700
3139 228 10751
VIZIO VIA PLUS (BluRay)
KWR144803/01
XRA700
3139 228 10761
VIZIO VIA PLUS (Adapter)
Confidential
©Philips Home Control,
2012
Page 1 of 6
Philips Home Control
FCC Statement
FCC Part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
No special accessory is required to enable the equipment to comply with the emission
limits.
Confidential
©Philips Home Control,
2012
Page 2 of 6
KWR144801/01, KWR144802/01 & KWR144803/01
Table of Contents
1.
INTRODUCTION
1.1
1.2
1.3
2.
PURPOSE
FCC ID LOCATION
BATTERY INSTALLATION BEFORE GET STARTED
GENERAL PRODUCT DESCRIPTION
2.1 PRODUCT FUNCTIONS
2.2 DESCRIPTION OF PROCESSES
2.3 DESCRIPTION OF SYSTEM
2.3.1
Default Vizio IR mode
2.3.2
Normal operation mode
2.3.3
RF (2.4GHz) pairing
2.3.4
Delete pairing information
2.3.5
Code set ID setup for a device
2.3.6
Stuck Key time out function
2.3.7
Simultaneous Keypress
2.3.8
Standby mode
Status :Draft
Philips Home Control
Page 3 of 6
Company Restricted
KWR144801/01, KWR144802/01 & KWR144803/01
1. Introduction
1.1 Purpose
This document of KWR144801/01, KWR144802/01 & KWR144803/01 is to brief the basic function of
the application domain.
1.2 FCC ID Location
Picture 1
1.3 Battery Installation before get started
•
•
Pull out the battery compartment (refer Picture 1) and insert 2 pieces of AA batteries with correct
polarity (+ or -) as Picture 2.
Insert the battery compartment into the remote control as Picture 3.
Picture 2
Status :Draft
Philips Home Control
Picture 3
Page 4 of 6
Company Restricted
KWR144801/01, KWR144802/01 & KWR144803/01
2. General product description
2.1 Product functions
These products are making for Vizio BlueTooth internet ETV (KWR144801/01), Digital Media Adaptor
(KWR144803/01) & Blue-ray player (KWR144802/01). It is a combine function of
• Remote control
• Touch pad mouse
• Qwerty Keyboard
• IR DB slave module
• Upgradable DB for end user via Bluetooth, search by model number
• Accelerometer for gaming, report raw data to host
2.2 Description of processes
Stop mode
Any key
Is pressed
system idle for
more than few seconds
Active mode
This remote will contain below functions:
Inputs:
• key scan info
• data from Bluetooth interface
Outputs:
• IR signal is generated to target device via IR LED or
• RF signal is generated to target device via Bluetooth module.
When the keyboard facing to the user side, pressing any keyboard button will trigger the product send
key event to the target device.
Status :Draft
Philips Home Control
Page 5 of 6
Company Restricted
KWR144801/01, KWR144802/01 & KWR144803/01
2.3 Description of system
The features of this KWR144801/01, KWR144802/01 & KWR144803/01 as follows:
•
•
•
•
•
•
•
•
Default IR mode
Normal operation
RF pairing
Delete pairing information
ID setup for a device
Stuck key Timeout
Simultaneous keypress (multiple keypress)
Standby mode
2.3.1 Default Vizio IR mode
This is the default mode when user takes the remote control out of box, it will able to transmit IR code
for IR receiver without any setup after insert battery.
2.3.2 Normal operation mode
This is the normal operation when target device is turns on; remote is paired with target device, microcontroller is in active mode, keyboard/remote function as RF (2.4GHz) HID device.
2.3.3 RF (2.4GHz) pairing
The RF (2.4GHz) device needs to be paired before enable its function. This remote control equipped
with a 2.4GHz RF module. It must pair with the target device before use it as a RF (2.4GHz) remote
control.
2.3.4 Delete pairing information
After remote control paired with target device, if user want go back to default IR remote mode, press
and hold buttons  + 
 +  on keyboard for 5 seconds, then release all of them will
erase the pairing information.
2.3.5 Code set ID setup for a device
This function is heavily depends on target device and many mutual active between target device,
remote control & user.
There is a load list contain devices, brand names and code set IDs table stored in target device. This
load list is for setup IR database code set ID for an IR device.
For example user has a Philips DVD player. User intends to use this remote control to control this
DVD player. Setup the code set ID, DVD device should be selected. Then select brand name Philips.
Under the brand name Philips, there may have multiple code sets. Each code set represents a
physical remote control. After make the selection, the remote control will set a control code set.
Target device application can assign default code set for each device, or leave it blank.
2.3.6 Stuck Key time out function
The remote control will shut down after 25-30 seconds when the last key transition to consume
minimal power. After all keys are released, the remote resumes normal operation.
2.3.7 Simultaneous Keypress
If more than one key press is detected, the remote control will stop sending signal.
2.3.8 Standby mode
The standby mode of the remote control shall be entered as soon as possible after the pressed key is
released.
Status :Draft
Philips Home Control
Page 6 of 6
Company Restricted

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:04:12 14:42:38+08:00
Create Date                     : 2012:04:12 14:42:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Manual-KWR144801-V02
Creator                         : sgg04678
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:2020df78-a8dd-44e5-a91a-a1a04cfd1414
Instance ID                     : uuid:16f759a9-f968-4bd5-a396-e6da564fdb63
Page Count                      : 6
Author                          : sgg04678

EXIF Metadata provided by EXIF.tools