Philips Electronics Singapore KWR16A VIZIO VIA REFRESH User Manual Manual KWR164501 V01

Download:
Mirror Download [FCC.gov]
Document ID	1578478
Application ID	tgNr3zZH0nZng4EJb1H5nw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.43kB (192922 bits)
Date Submitted	2011-11-09 00:00:00
Date Available	2011-11-09 00:00:00
Creation Date	2011-10-24 14:29:39
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-10-24 14:29:39
Document Title	Microsoft Word - Manual-KWR164501-V01.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sgg04678

Philips Home Control
Manual of KWR164501/01
Confidential
©Philips Home Control,
2011
Page 1 of 8
Philips Home Control
FCC Statement
FCC Part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
No special accessory is required to enable the equipment to comply with the emission
limits.
Confidential
©Philips Home Control,
2011
Page 2 of 8
KWR164501/01
Table of Contents
1.
INTRODUCTION
1.1
2.
PURPOSE
GENERAL PRODUCT DESCRIPTION
2.1
3.
PRODUCT FUNCTIONS
FUNCTIONAL REQUIREMENTS
3.1 DESCRIPTION OF PROCESSES
3.2 DESCRIPTION OF SYSTEM
3.2.1
Default Vizio BT TV IR mode
3.2.2
Normal operation mode
3.2.3
TV off mode
3.2.4
RF (2.4GHz) pairing
3.2.5
Delete pairing information
3.2.6
Device mode change and device ID
3.2.7
Code set ID setup for a device
3.2.8
Stuck Key time out function
3.2.9
Simultaneous Keypress
3.2.10
Standby mode
3.3 REAL TIME REQUIREMENTS
4.
DEFAULT IR CODE
4.1
BUTTON AND CODE MAPPING
Status :Draft
Philips Home Control
Page 3 of 8
Company Restricted
KWR164501/01
1. Introduction
1.1 Purpose
This document of KWR164501/01 should be understood by all people with sufficient
knowledge of the application domain.
Status :Draft
Philips Home Control
Page 4 of 8
Company Restricted
KWR164501/01
2. General product description
2.1 Product functions
This KWR164501/01 product is a RF (2.4GHz) keyboard + RF(2.4GHz) & Infrared Remote (IR).
From the whole system point of view, the TV will be the host; the remote is a dummy slave.
In normal working mode, the IR host always report key information to the TV and wait instruction from
the TV.
There is no mode indicate on the remote, all remote mode info are displayed on the TV.
IR database auto / manual search will be done by remote/TV mutual active.
Status :Draft
Philips Home Control
Page 5 of 8
Company Restricted
KWR164501/01
3. Functional requirements
3.1 Description of processes
Stop mode
Any key
Is pressed
system idle for
more than few seconds
Active mode
This remote will contain below functions:
Inputs:
• key scan info
• data from Bluetooth interface
Outputs:
• Data to TV
• IR transmit
When the keyboard facing to the user side, pressing any keyboard button will trigger the product send
key event to the TV.
3.2 Description of system
The features of this KWR164501/01 as follows:
•
Default TV IR mode
•
Normal operation
•
TV off mode
•
Device mode change
•
Auto search
•
Stuck key Timeout
•
RF (2.4GHz) keyboard
•
Reset feature
Status :Draft
Philips Home Control
Page 6 of 8
Company Restricted
KWR164501/01
3.2.1 Default Vizio BT TV IR mode
This is the default mode when user takes KWR164501/01 out of box, it will able to transmit IR code
for TV IR receiver without any setup after insert battery.
3.2.2 Normal operation mode
This is the normal operation when TV is turns on; remote is paired with TV, micro-controller is in
active mode, keyboard/remote function as RF (2.4GHz) HID device.
3.2.3 TV off mode
This is when TV is power off, if the IR device (for example DVD) is set and selected before TV turns
off, remote will function as an IR remote control, the device mode will be the last device mode before
TV switch off.
3.2.4 RF (2.4GHz) pairing
The RF (2.4GHz) device needs to be paired before enable its function. This KWR164501/01 equipped
with a 2.4GHz RF module. It must pair with the TV before use it as a RF (2.4GHz) remote control.
3.2.5 Delete pairing information
After KWR164501/01 paired with TV, if user want go back to default IR remote mode, press and hold
buttons  + 
 +  on keyboard for 5 seconds, then release all of them will erase the
pairing information.
3.2.6 Device mode change and device ID
For the remote function, there are RF (2.4GHz) TV mode and IR device mode. Under IR device, there
are multiple physical devices, they are SAT/CABLE, VCR, DVD / Blue ray / HD, PVR, Audio
(Tuner/Receiver) and Amplifier.
The device name or icon will display on TV when change device function on the TV. User can use
navigate key to move between devices, press  key on remote will inform TV to make device
selection.
3.2.7 Code set ID setup for a device
This function is heavily depends on TV and many mutual active between TV, KWR164501/01 & user.
There is a load list contain devices, brand names and code set IDs table stored in TV. This load list is
for setup IR database code set ID for an IR device.
For example user has a Philips DVD player. User intends to use this KWR164501/01 to control this
DVD player. Setup the code set ID, DVD device should be selected. Then select brand name Philips.
Under the brand name Philips, there may have multiple code sets. Each code set represents a
physical remote control. After make the selection, the KWR164501/01 will set a control code set.
TV application can assign default code set for each device, or leave it blank.
3.2.8 Stuck Key time out function
The KWR164501/01 will shut down after 25-30 seconds when the last key transition to consume
minimal power. After all keys are released, the remote resumes normal operation.
3.2.9 Simultaneous Keypress
If more than one key press is detected, the KWR164501/01 will stop sending IR code.
3.2.10 Standby mode
The standby mode of the KWR164501/01 shall be entered as soon as possible after the pressed key
is released.
3.3 Real time requirements
There will be data transmit latency on both Bluetooth interface and GPIO interface, compare the
timing, the BT latency is much heavy, around 20 ~ 50 ms. This timing is pending confirm from
Broadcom.
Status :Draft
Philips Home Control
Page 7 of 8
Company Restricted
KWR164501/01
4. Default IR code
4.1 Button and Code Mapping
Protocol:
Carrier Frequency:
Remarks:
NEC
38kHz, Customer ID: 04FBH
All codes are described as hexadecimal.
TV POWER
0x08
Device power
No code
INPUT
0x2F
Vizio APP1 (Amazon)
EA
REW
0x35
10
Vizio APP2 (NETFLIX)
EB
PAUSE
PLAY
0x37
0x33
11
List
0x1D
12
Record
0x34
13
STOP
0x30
18
17
ArrowDown
0x46
25
24
27
ArrowRight
0x48
22
BACK
0x4A
Yellow
0x52
19
Select/OK
0x44
ArrowLeft
0x47
21
23
MENU
0x4F
ArrowUP
0x45
EXIT
0x49
20
Blue
0x53
GUIDE
0x1C
26
Red
0x54
28
Vizio Widget
0x2D
31
Vol –
0x03
CH +
0x00
32
MUTE
0x09
33
LAST
0x1A
39
38
42
41
Digit 9
0x19
Digit 8
0x18
Digit 7
0x17
43
Digit 6
0x16
Digit 5
0x15
Digit 4
0x14
40
Digit 3
0x13
Digit 2
0x12
Digit 1
0x11
37
CH –
0x01
36
35
34
Green
0x55
29
Vol +
0x02
30
INFO
0x1B
16
15
14
Vizio APP3 (VUDU)
EC
FF(Fast forward)
0x36
44
WIDE
77
Status :Draft
Philips Home Control
45
Digit 0
0x10
─ (DASH)
FF
Page 8 of 8
Company Restricted

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : sgg04678
Title                           : Microsoft Word - Manual-KWR164501-V01.doc
Create Date                     : 2011:10:24 14:29:39+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:10:24 14:29:39+08:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:1cce2870-30c2-4f7e-a386-a2ff72da8564
Instance ID                     : uuid:7d3cbe46-a165-49a3-840a-9f10e7a4905f
Page Count                      : 8
Author                          : sgg04678

EXIF Metadata provided by EXIF.tools