Philips Electronics M086 User Manual 11621

Download:
Mirror Download [FCC.gov]
Document ID	11621
Application ID	nSEtCHy4vfq2HXodDvPusQ==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.64kB (345503 bits)
Date Submitted	1998-11-04 00:00:00
Date Available	1998-11-23 00:00:00
Creation Date	2001-07-08 18:54:11
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-07-08 18:54:23
Document Title	11621.pdf
Document Author:	VicodinES /CB /TNN

l‘('(‘ IL): A3KM086
Exhibit 5
INSTALLATION AND OPERATING
INSTRUCTION
Federal Communications Com-
mission
(FCC Statement)
NOTE: This equipment has been tested and found to comply with the
limits Ior a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to proVide rsasonabie protection
against harmiul inlenerence in a residentiai instailalion, This
equipment generates. uses and can radiate radio irequency energy
and, it not installed and used in accordance with the instructions, may
cause harmiul inlerlerence to radio communications. However, there
is no guarantee that interference Will not occur in a particular
instaIIation II this equipment does cause harmiui interference to radio
or tetevtsion reception, which can be determined by turning the
equipment oil and on. The user is encouraged to try to correct the
interference by one or more oi the Iollowmg measures:
7 Reonent or relocate the receiving antenna
7 Increase the separation between the equipment and receiver.
7 Connect the equipment into an outlet on a circuit different lrom that
to which the receiver is connected
7 Consult the dealer or an experienced radiO/TV technician Icr help.
CAUTION: Changes or modifications not expressly approved by the
parly responsibie Ior compliance could void the user’s authority to
operate the equipment.
Use only RF shielded cable that was supplied With the monitor when
connecting this monitor to a computer device.
Warning:
WHEN POSITIONING THIS EQUIPMENT ENSURE THAT THE
MAlNS PLUG AND SOCKET IS EASILY ACCESSIBLE
To prevent damage which may resull in lire or shock hazard, do not
expose this appliance to rain or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS
______,-————-
’
Introduction
The PHILIPS 1078 color monitor displays sharp and brilliant images of
text and graphics with a maximum resolution up to 1280x1024 pixels. It
is optimal for Windows, CAD / CAM (CAE, desktop publishing‘ spread
sheets, multi-media, and any other application which demands large
screen size and high resolutions
This monitor automatically scans horizontal frequencies from 30KHZ to
70KI-iz. and vertical frequencies from 50Hz to 120Hz With
microprocessor based digital controlled circuit. the monitor can
automatically adjust itself to the video cards scanning lreouency and
displays an image with preCise parameters you desire, The wide range
ot scanning frequency supports variety of operating plattorms. such as
IBM PC and Compatibles, Apple’s Macintosh, Quadra and Centris
families, Power PC and workstations, /_\
Feature Highlights ,
- On-Screen-Display lunction provides more informations when the
user operates the control functions. This leature provides user-
triendliness and ease-ot-use when operating the monitor.
- Anti-Glare and Anti-Stalic screen coating eliminate any bad effects
caused by the screen surlace such as reflection oi the room lights
and dust attraction
- With Color Adiustment function you can easily choose dii‘lerent
preset color temperatures or set your own customized color
parameters
- Image Tilt Adiuslment lunction provides correction of rotated image.
This correction can minimize the distortions caused by outside
environments. such as earth magnetic Iieid.
- Green Design including automatic power saving lunctiori (NUTEK)
and low emission T0099 tMPFiII Ior 1726226 compliance shows
Our commitment in environmental care
- DDCI/DDCZB allows communication between the monitor and PC
system for optimal video configuration.
Nola. ll you experienced your monitor display is changing from culor to
mono‘ ll‘s possible lhal you are using a non-VESA-DDC-standard vrdeo
card. Please consult with your local Phllr’ps dealer for more inlermallon,
ENERGY STAR ls a US registered mark.
As an ENERGY STAR® Panner, PH|L|PS has delerrnined that this
product meals lhe ENERGY STAR® guidellnes lor energy efficiency.
IBM, lBM PC and Power PC are registered trademarks ol Inlernational
Buslness Machines Covporalion.
Apple, Macmlosh, Quadra and Centris are reglslered trademarks 0!
Apple Campuler, Inc.
Safety precautions and maintenance
0 Disconnect the monitor from the mains supply it the monitor ls not to
be used tor an extended period of time.
0 Do not attempt to remove the back cover. as you will be exposed to
a shock hazard. The back cover should only be removed by qualilled
servtce personnel.
0 Do not place obiects on top of the monitor cabinet, which could tall
into vents or which could cover them and prevent proper cooling of
0 the monitor's electronic devices
Do not expose the monitor to rain or excessive moisture to avoid the
risk oi shock or permanent damage to the set
0 Do not use alcohol or ammonia based liuuid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
irom the mains supply oetore cleaning.
0 Consult a service technician it the monitor does not operate normally
when operating instructions of this manual are lollowed
Package
Vour PHlLlPS 1078 package includes the following items:
— The monitor (integrated With tilt / swivel pedestal)
- Power cord
- Interface cable (flying-in)
' Disk for Windows 95 driver
End of life disposal
Vour new set contains materials which can be recycled and reused
Speciallzed companies can recycle your product to increase the amount
at reusable materials and to minimize the amount at materials to be
disposed of.
Please inform yoursell on local regulations on disposal oi your old set.
______—————
Installation
Important: Please refer to the user's manuals of your computer
and video adapter to make sure these equipments are properly
installed and configured before installing the monitor.
Positioning / Ventilation
0 Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources,
0 To prevent overheating, make sure that the ventilation openings at
the monitor are not covered.
0 Keep meistwse and dust away
0 {men away from any magnetic objects such as speakers, electric
motors.transtormersi etc.
0 When positioning this monitor, make sure that the mains plug and
socket are easrly accessible.
Pedestal
With the built-in pedestal you can tilt and l or swwel the monitor for a
most comlonable viewmg angle
Connection
Important: Please make sure the AC power to your computer is
“OFF" before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal iniury
as well as permanent damage to your computer equipments.
- Connect the monitor to the computer using the supplied interiace
cables. Connection With computer system other than IBM PC may
need difierent type at adapters. Please consult your computer supplier
(or these adapters, Connect the power cord to a wall outlet alter the
interface cable is properly connected,
Monitor rear mew
mains connection
’
Control locations and functions
Descriptions of knobs and keypads on lronl control panel
To tum on 0! off the powerv
To scruli the OSD iunciion and adjust the scaie oi me selected
Iunciion.
a?
To access OSD menu
(fl
Adiust conirast oi the display.
Adjust brightness ni the dlsp|ay,
OSD menu tree structure
First Level
— sun. vosmoN
ssomsrsv
7 com rmmwas
- Anvmcfincomhms —— FowEHsAva oNxOFr
NaNmN smus
DEC-Auss
MUVE an m
Exwosn
mgr
Second Level Thlld Level
ZOOM
Nowzon POSmDN
NumaNm 5sz
vzanm vosmoN
mum 5qu
we 5, WEN/RN VOMAWN MENU
RECALL
aounuN
mNcusmoN
TRAVEZ—Ou:
BALANCED chuswoN
pmmaoemm
5m & RETURN m MAW New
mm
vann
e50u
usznw
USERz
5Av5 s RETURN To
MAW MENU
Ream
HI
i 1
LANGUAGES
HH
4 uncnzs ON ‘ OFF
7 MD WEN ——
lIH
Moms
Ill
stc mvul 5mm
Hi
7 5sz s REYUFN vo MAW MENU
— RECAlL
_ sassy MODE
4 NEW MODE
NO
[: vEs
RED men comm
GREEN [GREEN CDLDR)
awe mus comm
was HEVURN m MAW MENU
nzcm
RED (azucmom
GREEN [GREEN comm
mus 4BLchmom
5sz s RETURN w MAIN MENU
ascm
ENGUSH
DEUYSCH
ramcms
mumo
559mm
as
50
we 1, mum m MNN MENU
cmm
m SvNc
stc UN GREEN
SAVE a RETURN W MAIN MENU
RECAu
_______—————
Adjustment via On-Screen-Display
Brightness / Contrast
adjustment ct brightness. contrast
. Press rt , then use OSD rotary
encoder to adjust.
. The adjusted parameters are
automatically saved and the OSD
menu will disappear within 5
seconds it there is riot any
adjustment/action has been made.
lRIGHYN ss
. Press 0 , then use OSD rotary
encoder to adjust.
. The adjusted parameters are
automatically saved and the OSD
menu wrll disappear Within 5
seconds if there is not any
adjustment/action has been made.
coNrrtAsr
SIZE & POSITION
Adjusxmenls o! zuom, horizontal pusilion, horizontal size, vertical
position, vertical size:
main menu
luunu ufluz Isuz
mun NENU
2nd ievel menu
SIZE A rosmoN
Press @, to access OSD menu
Use OSD rotary encoder to move
ihe bar to "SIZE 8: POSiTlON".
Press E} to access the 2nd Ieiel
menu Use OSD rotary encoder
to seiecl the funcnon you want to
adjust
Press [5], then use OSD rotary
encoder to adjust
Press @, return to 2nd level
menu.
The adjusted parameters are
auiomaiicaliy saved and the OSD
menu will disappear Within the
time you selected on OSD TIMER
(e 9.10 seconds) ii there is nm
any adjustmenI/acnon has been
made.
Press [5], return to the OSD
main menu
SIZE 8: POSITION 3rd level menu
ZOOM
HORIZONTAL POSITION
, L uenuwul. no qu
HORIZONTAL SIZE
HOIIIIONTAI. $le
VERTICAL POSITION
Posn
VERTICAL SIZE
VEITICAL SIIE
10
GEOMETRY
adjustments of rotation, pincushion, trapezoid, balanced
pincushiun, parallelogram:
. Press (g. to access OSD
main menu menu.
rnzurn u. 71011 ma
mun nsnu . Use OSD rotary encoder to
move the bar to
"GEOMETRW.
. Press @ to access the 2nd
level menu. Use OSD rotary
encoder to select Ihe function
you want to adlust.
. Press @, then use 030
2nd level menu rotary encoder to adjust.
csonsm , . Press lg, return to 2nd level
menu
. The adjusted parameters are
automalmally saved and the
OSD menu wrll drsappear
Within the time you selected
on OSD TIMER (9.9 10
seconds) it there is not any
adjustment/action has been
made.
. Press (5. return to the OSD
main menu.
GEOMETRY 3rd level menu
(1) ROTATION
cm
(2) FlNCUSHION
Pl
(3) TRAPEZOID
rwszol n
(4) BALANCED P‘NCUSHION
IAL
(0
NEUSHI on
(5) PARALLELOGRAM
PAMLLELWRAM
COLOR TEMPERATURE
main menu
luzuru “JKHZ um
MAIN HEW
. Press (3. to access OSD
menu
. Use OSD rolary encoder to
move the bar to
”COLOR TEMPERATURE".
. Press E! to access Ihe 2nd
\evel menu. Use OSD rotary
encoder to selecl the function
you want 10 adjust
. Press E! , the screen will
Show the color you se‘ecled
(QSDODK or 6500°K). Or use
OSD rotary encoder to adjust
your own.
12
2nd revel menu
coLox rznnnmmz
. The adjusted parameters are
automatically saved and the
OSD menu will disappear
within 10 seconds if there is
not any adjustmenfi/acnon has
been made.
a Press E]. return to the OSD
main menu.
COLOR TEMPERATURE 3rd level menu
(1) USEFH
Use OSD rolary encoder to the
function you need, Ihen press
and use OSD rotary enooder 10
adrust il.
Press @ and use OSD rclary
encoder to choose “SAVE 8.
RETURN TO MAIN MENU“ or
"RECALL".
Use OSD rotary encoder (o the
funcbon you need, then press
and use OSD rotary encoder to
adjust it.
Press @ and use OSD rotary
encoder to choose “SAVE 8.
RETURN TO MAIN MENU" or
”RECALL"
13
ADVANCED CONTROLS
maln menu
ruuxnn quHz lSNZ
mun "(NU
2nd lever menu
ADVAI‘ED CONTROLS
Press (3. to access OSD
menu.
Use OSD rotary encoder to
move Ihe bar I0
"ADVANCED CONTROLS",
Press E] to access the 2nd
level menu. Use OSD rotary
encoder to seem the functron
you want lo aulusl.
Press @. use OSD rotary
encoder |D adjust.
Press 3 return to 2nd level
menu.
The adjusted paramelevs are
automancally saved and the
OSD menu wrl! drsappear
wnhin the time you sereczed
on OSD T‘MER (e g. 10
seconds) if there is not any
adjustment/action has been
made
Press @, rerurn lo the OSD
mam menu.
ADVANCED CONTROLS 3rd level menu
(1) LANGUAGE
LANGUAGE .
(21050 TrMEH
asp rmu
14
(3) MOIRE
. Use OSD (olary encoder m
choose "H" or "V“.
- Press @ then use OSD tolary
encoder to adjust
. Press @ and use OSD rclary
encoder Io choose “SAVE &
RETURN TO MAIN MENU” or
“RECALL”.
(4) SVNC INPUT SELECT
“NC ”I rm" suscT
smc mrut sum ; AT‘IENHDN
PLEASE MAKE suns Vouk
VIDEO CARD HAS
SYNC ON GREEN
MONITOR STATUS
main menu
”"“7,‘4L,,‘,'1§,"5“l ”H1 . Press 5; '0 access OSD main
' ' ‘ menu.
0 Use OSD rotary encode! to move
the bar to "MON\TOR STATUS”
0 Press E to access the 2nd level
menu.
2nd level menu
”canon s
2nd \eve| menu
DEGAUSS
main menu
inmiu u.1xn1 as“!
mm MENU
EXIT 030
main menu
iuzuiu AIJKfiI ISNZ
~Aiu nzuu
RESET
main menu
mum “mix mix
mun grimy
2nd level menu
n Na;
user Au,
“711,7‘.
. Press E) to access main menu
. Use OSD rmlary encoder to
move the bar to “RESET".
. Press igto access the 2nd level
menur At this moment, it shows
preset parameters status on
the screen and you can select
“NO" to go back to the previous
setting or “YES" to reset all
setllngsr
. ll lhere is no action made‘ tnen
OSD menu Will disappear within
the time you selected on 080
TlMEFi (eg. 10 seconds) and
the parameters will return to the
previous setting.
How it you get lost in OSD tree stuclure’J
You can press [g to go back to OSD main menu and select "RESET"
in main menu to resel all settings.
16
Data Storage
(A) Faclory preset mode:
This monilor has 8 iaclory-presel modes as indicated in (he lollowing
labia.
Frequence Sync polarity
Mode Resolulion H(KHZ) Vle) H V
M01 VGA 600x400 31 5 70 — +
M02 VGA 640x450 31 5 60 — —
M03 VGA 640x480 43.3 85 7 7
M04 SVGA 800x600 46.9 75 + 4-
M05 SVGA 800x600 537 85 + ¢
M06 EVGA 1024x768 60 0 75 4- +
M07 EVGA 1024x768 68.7 85 + +
1250x1024 64.0 60 + +
(B) User made
In addition lo faclow preset modes, the moniior can also provides
additional 8 Userrdelined modes
If (he inpul video signal is different from our faclory-presel modes,lhe
new liming data Will be automalically slored. However, the displayed
parameters may need lo be adjusled, User can adjust the paramelers
via OSD, as preceding procedures which already described on
“Adjustment via On-Screen-Display" seclion.
(C) New mode
The monitor is reversed lor 4 new modes in case non-standard video
modes are used,
17
Automatic Power Saving
ll you have VESA‘s DPMS compliance display card or software installed
in your PC, the monitor can automatically reduce its power consumption
when not in use And l' an input from keyboard, mouse or other input
devices is detected, the monitor will automatically "wake up". The
lollowing table shows the power consumption and signalling ol this
automatic power saving feature:
Power Management Definition
VESA‘S mode Video Hrsync V-Sync Power Power LED
used savingl%) color
ON Active Ves Yes < 110W (We Green
Stand-by Blanked NO Yes < 15W 86% Vellow
Suspend Blanked Yes No < 15W Ben/n Yellow
OFF Elanked N0 N0 < SW 959:- Amber
efficiency
18
This monitor is ENERGY STAR® compliant.
As an ENERGY STAR® Partner, PHILIPS has determined
that this product meets the ENERGY STAR‘lg guidelines for energy
Specification*
(I) General
CRT
Screen size
Focusmg method
Du! pitch
Phosphcv
Screen Ireatmem
Dismay area
Factory preset
Maximum usab‘s
Scanmng Orequency
Honzonia! um)
Venlcal Urame)
Input power
meev consumpnon
mum signal
Sync
Fedestaw
Ti‘t
Swwel
Physwcm
Unn dimenswon (WxHxD)
Ne: wswght
Opevanng common
Temperature
Humidity
Stovage condmon
Temperature
Humldny
thle Cowor Coordmales
sauogk: x: u 251
y: 0.311
' Because oi a poncy cl conunuous product mpyovgmem, the above specifications
17” (43.2 cm} “at & Square
1 Dynamic locus
: 025 mm
P22 m equwa‘em, memum short
pevswstence
: Anurglare‘ arm-5mm:
. 305 mm (H) x 230 mm (V)
: 323 mm1H)x 242 mm (V)
: 30-70 kHz (AuluScan)
: 50-120 HZ (AutOScan)
‘ 220-240 VAC, 50 Hz
110 Wan maximum
, ,Separate sync TI'L level
. Composne sync. TTL level
Sync; on green video
. 5“ turwavd. 13° backward
: 90° leflward, 90° rightward
' 420 x 424 x $52 (mm)
175kg
.0°C-40"C
1035 , 90%
' ~25° C - 55° C
% - 95°/a
6500°ki X: 0.313
y: 0.329
are subJected to Change wilhoul noticeA
(I!) Fin assignment:
1 5
5, m
u 15
The 157pin D—sub conneclor(male)ol1he sngna1 cable (IBM syslems):
Pin No. Asswgnment Pm No, Assignment
1 Red vwdeo inpm 9 No pin
2 Green v1deo mput 10 Logic ground
3 Blue wdeo input H Identical output
4 Identical output - oonnecled to pin 10
- Connected 10 pin 10 12 Serial data fine (SBA)
5 self test 13 H. Sync / H+V
5 Her! video ground 14 V1 Sync (VCLK for DDC)
7 Green video ground 15 Dala clock line (SOL)
8 Blue video ground
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:07:08 18:54:11
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 11621.pdf
Modify Date                     : 2001:07:08 18:54:23-04:00
Page Count                      : 22

EXIF Metadata provided by EXIF.tools