Philips Medical Systems North America WLANBV1 WLAN Module User Manual G 0 addendum

Download:
Mirror Download [FCC.gov]
Document ID	1077517
Application ID	770hYFwMmS+jF+pGGqsrzQ==
Document Description	Addendum to User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.47kB (68338 bits)
Date Submitted	2009-03-06 00:00:00
Date Available	2009-04-20 00:00:00
Creation Date	2008-11-25 13:02:32
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-12-18 13:51:19
Document Title	G.0_addendum.fm
Document Creator	FrameMaker 7.0
Document Author:	dep01290

Addendum to the Instructions for Use
Addendum to the Instructions for Use
English
This addendum provides additional or corrected information for the following IntelliVue Instructions
for Use (software revision G.01.xx):
• MP20-MP90 Patient Monitor (M8000-9001K)
• MP5 Patient Monitor (M8105-9001C)
• MP2 Patient Monitor (M8102-9001B)
• X2 Multi-Measurement Module (M3002-9001B)
If your Instructions for Use has a different part number, you may discard this addendum, otherwise
please store it with your monitor documentation.
CO2 Alarm Specifications
For Microstream CO2 in the MP5 and for the M3015A, the CO2 alarm specifications are as follows:
CO2 Alarm
Specifications
Range
etCO2 High
20 to 95 mmHg (2 to 13 kPa) 1 mmHg (0.1 kPa)
etCO2 Low
10 to 90 mmHg (1 to 12 kPa)
imCO2 High
2 to 20 mmHg
(0.3 to 3.0 kPa)
steps of 1 mmHg
(0.1 kPa)
less than 21 seconds.
awRR High
Adult/pedi: 10 to 100 rpm
Neo: 30 to 150 rpm
less than 21 seconds.
awRR Low
Adult/pedi: 0 to 95 rpm
Neo: 0 to 145 rpm
under 20 rpm: 1 rpm
steps
over 20 rpm:5 rpm
steps
Apnea delay
10 to 40 seconds
5 second steps
Adjustment
Delay
less than 21 seconds.
settings <20 rpm: less than 8 seconds
>20 rpm: less than 21 seconds
set apnea delay time + 8 seconds (with
2 m sample lines) or 11 seconds (with
4 m sample lines).
IntelliVue Telemetry Transceiver User Information
For complete user information, including accessory listings and specifications, for the M4841A/
M4851A TRx/TRx+ IntelliVue Telemetry Transceiver, please refer to the Instructions for Use
provided with the device.
MP2/X2 Radiofrequency Radiation Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and the patient or user.
The transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Addendum to the Instructions for Use
MP5/MP5T - Intended Use
The monitor is intended to be used for monitoring and recording of, and to generate alarms for,
multiple physiological parameters of adults, pediatrics, and neonates in a hospital environment. The
MP5 and MP5T monitors are also intended for use during patient transport inside the hospital
environment; only the MP5 monitor for use during patient transport outside of the hospital
environment. The MP5 and MP5T when used with TRx 4841A/4851A IntelliVue Telemetry System
Transceiver are intended for use in a hospital environment and during patient transport inside the
hospital environment.
Measurement Modules
You can plug in and unplug modules during monitoring. Insert the module until the lever on the
module clicks into place. Remove a module by pressing the lever upwards and pulling the module out.
A measurement automatically switches on when you plug the module in, and switches off when you
unplug it. Reconnecting a module to the same monitor restores its label and measurement settings,
such as alarms limits. If you connect it to a different monitor, the module remembers only its label.
2Addendum to the Instructions for Use
Language 2
2Addendum to the Instructions for Use
Language 3
3Addendum to the Instructions for Use
Language 4
4Addendum to the Instructions for Use
Language 5
5Addendum to the Instructions for Use
Language 6
6Addendum to the Instructions for Use
Language 7
7Addendum to the Instructions for Use
Language 8
8Addendum to the Instructions for Use
Language 9
9Addendum to the Instructions for Use
Language 10
10Addendum to the Instructions for Use
Language 11
11Addendum to the Instructions for Use
Language 12
12Addendum to the Instructions for Use
Language 13
13Addendum to the Instructions for Use
Language 14
14Addendum to the Instructions for Use
10
11
12
13
14
15Addendum to the Instructions for Use
Language 15
15Addendum to the Instructions for Use
Language 16
16Addendum to the Instructions for Use
Language 17
17Addendum to the Instructions for Use
Language 18
18Addendum to the Instructions for Use
Language 19
19Addendum to the Instructions for Use
Language 20
20Addendum to the Instructions for Use
Language 21
21Addendum to the Instructions for Use
Language 22
22Addendum to the Instructions for Use
Language 23
23Addendum to the Instructions for Use
Language 24
24Addendum to the Instructions for Use
15
16
17
18
19
20
21
22
23
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.0
Modify Date                     : 2008:12:18 13:51:19Z
Create Date                     : 2008:11:25 13:02:32Z
Format                          : application/pdf
Title                           : G.0_addendum.fm
Creator                         : dep01290
Document ID                     : uuid:6542ae71-000b-41c3-a499-20d1fa367cf9
Instance ID                     : uuid:842d1e35-21e2-469b-8a38-99d12113d807
Page Count                      : 4
Author                          : dep01290

EXIF Metadata provided by EXIF.tools