Philips Medical Systems North America WLANBV2 WLAN Module IEEE 802.11 a/b/g/n User Manual Installation Instructions

Download:
Mirror Download [FCC.gov]
Document ID	2036885
Application ID	2TKeth/chA0+ZZovbd9wcg==
Document Description	Installation Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.24kB (403043 bits)
Date Submitted	2013-08-08 00:00:00
Date Available	2013-08-08 00:00:00
Creation Date	2013-06-17 14:08:03
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2013-06-17 14:08:03
Document Title	Installation Instructions
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	Stephan Walter

WLANBV2-A WLAN Module User’s
Manual
Product: WLANBV2-A WLAN Module
Model: WLANBV2-A
For OEM integration only – device cannot be sold to general public. Therefore we will not supply the
User’s manual, the installation manual is the official for OEM.
FCC ID: PQC-WLANBV2
IC: 3549C-WLANBV2
We will ask OEM to include the following Notices required by FCC/ IC on the product and in the User’s
manual.
Notifications
FCC ID: PQC-WLANBV2
IC: 3549C-WLANBV2
NOTICE
Federal Communication Interference Statement (United States only)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
Re-orient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Philips Medizin Systeme Böblingen GmbH
Hewlett-Packard-Str. 2, 71034 Böblingen, Germany
Telefon +49 (0) 7031 463-0
Telefax +49 (0) 7031 463-2202
Geschäftsführer: Dr. Werner Haas (Sprecher), Michael Dreher, Klaus Baumann
Registergericht Stuttgart Reg.-Nr. HRB 245187, Sitz der Gesellschaft: Böblingen
www.philips.com/healthcare
Page 1 of 3
12-Jun-13
Notifications
•
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
Canadian Depertment of Communications Industry Canada Notice (Canada only)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC Rules, Part 15./ Industry Canadian
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference, including interference that may cause undesired
operation of this device.
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
•
•
l'appareil ne doit pas produire de brouillage, et
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65
and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities:
hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices
d'exposition dans le Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le
dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
Page 2 of 3
12-Jun-13
Notifications
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
This radio transmitter 3549C-WLANBV2 has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio 3549C-WLANBV2 a été approuvé par Industrie Canada pour fonctionner avec
les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise
pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor
environment only.
Antenna information:
•
•
Sleeve Antenna: 1.5dBi (2.4GHz), 2.1dBi (5GHz)
Embedded Antenna: 3.3dBi (2.4GHz), 4.9dBi (5GHz)
Frequency Tolerance：+/-20ppm
WARNING：
The FCC / The Industry Canada regulations provide that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Manual and Product Labeling information To The End User
The end user manual shall include all required regulatory information/warning as show in this manual.
And when this module is installed in the host product, you must include a "Contain FCC ID :: PQCWLANBV2" and a “Contain IC: 3549C-WLANBV2” in the label of the host product.
Page 3 of 3
12-Jun-13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Modify Date                     : 2013:06:17 14:08:03+02:00
Create Date                     : 2013:06:17 14:08:03+02:00
Metadata Date                   : 2013:06:17 14:08:03+02:00
Document ID                     : uuid:ba280d05-9aa8-48ed-a75f-fb66bae42cae
Instance ID                     : uuid:199a68ef-12bc-41c7-918b-bc81d7149c3f
Format                          : application/pdf
Creator                         : Stephan Walter
Producer                        : Adobe PDF Library 8.0
Company                         : Philips
Page Count                      : 3
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : Stephan Walter

EXIF Metadata provided by EXIF.tools