Philips 50PFL5922/F7 User Manual 50pfl5922 F7 Dfu Aen

65PFL5922/F7 User manual 65pfl5922_f7_dfu_aen 5000 series Chromecast built-in UHDTV 65PFL5922/F7 | Philips65PFL5922/F7

43PFL5922/F7 User manual 43pfl5922_f7_dfu_aen 5000 series Chromecast built-in UHDTV 43PFL5922/F7 | Philips43PFL5922/F7

55PFL5922/F7 User manual 55pfl5922_f7_dfu_aen 5000 series Chromecast built-in UHDTV 55PFL5922/F7 | Philips55PFL5922/F7

www.philips.com/welcome 43pfl5922_f7_dfu_aen

User Manual: Philips 50PFL5922/F7 User manual 5000 series Chromecast built-in UHDTV 50PFL5922/F7 | Philips50PFL5922/F7

Open the PDF directly: View PDF .
Page Count: 51

EN For further assistance, call the customer support service in your

country.

• To obtain assistance, contact Philips customer care center;

In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands

1 866 202 5960

México D.F. and área metropolitana; 58 87 97 36

Interior de la republica; 01 800 839 19 89

ES Para obtener más información, llame al servicio de soporte al cliente

de su país.

• Para obtener asistencia, comuníquese con centro de atención al

cliente de Philips;

En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes

de los Estados Unidos; 1 866 202 5960

México D.F. y área metropolitana; 58 87 97 36

Interior de la republica; 01 800 839 19 89

FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre

de service à la clientèle de votre pays.

• Pour obtenir de l’aide, communiquez avec le centre de service à la

clientèle Philips au;

Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges

américaines; 1 866 202 5960

México D.F. et área metropolitana; 58 87 97 36

Interior de la republica; 01 800 839 19 89

Register your product and get support at

www.philips.com/welcome

EN

User manual

ES

Manual del usuario

FR

Manuel d’utilisation

65PFL5922

55PFL5922

50PFL5922

43PFL5922

Telev isions

5000 series

Contents

1 Notice ....................................................................................... 5

2 Getting started ................................................................... 8

Features 8

Supplied accessories 8

Symbols used in this User manual 8

Unpacking 9

Installing the stands 10

Lifting the TV set 12

Removing cardboard 12

Installing the remote control batteries 12

Remote control 13

Control panel 14

Terminals 14

Connecting Antenna or Cable / Satellite / IPTV set-top box 15

Plugging in the AC power cord 15

Selecting your connection quality 16

Connecting your devices 16

TV initial setup 20

Chromecast built-in TV setup 22

3 Use your TV ....................................................................... 23

Switching on your TV and putting it in standby mode 23

Adjusting volume 23

Switching channels 23

Watching channels from an external device 24

Create a list of favorite channels 24

Changing Picture format 25

TV screen information 26

Using options menu 26

USB 27

4 Getting more from your TV ...................................... 30

Picture and sound setup 31

TV settings 31

Picture 31

Sound 33

Chromecast Built-in TV settings 34

Features 34

Installation 35

Accessibility 37

Search for channels 38

Install channels 38

Channel settings 39

Channel installation 39

Child lock 39

Change PIN 41

Digital audio language 41

Mono/Stereo 41

Update software 41

Preparing for the software upgrade 41

Downloading the software 41

USB upgrade 42

Network updates 42

Software settings 43

Software 43

5 Useful tips ........................................................................... 44

FAQ 44

Troubleshooting tips 45

6 Information ........................................................................ 47

Glossary 47

Maintenance 47

7 Specifications ................................................................... 48

8 Warranty ............................................................................. 49

License .......................................................................................... end of book

•Displays and illustrations may differ depending on the product you purchase.

2.English

Know these safety symbols The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the apparatus’s enclosure that may be of sucient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the apparatus.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The caution marking is located on the rear or bottom of the cabinet.

CAUTION

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.

Register Online at www.philips.com/welcome to ensure:

Register online today at www.philips.com/welcome today

to get the most benets from your purchase.

*Product safety notication *Additional benets

By registering your product, you'll receive

notication - directly from the manufacturer - in

the rare case of a product recall or safety defect.

Registering your product guarantees that you'll

receive all of the privileges to which you're

entitled, including special money-saving oers.

WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,

such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la che dans la borne

correspondante de la prise et pousser jusqu’au fond.

For fastest support visit us online for chat and self service

solutions at www.philips.com/support

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer

electronics industry are committed to making home

entertainment safe and enjoyable.

• As you enjoy your television, please note that all

televisions – new and old- must be supported on

proper stands or installed according to the

manufacturer’s recommendations. Televisions that are

inappropriately situated on dressers, bookcases,

shelves, desks, speakers, chests, carts, etc., may fall

over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations

for the safe installation of your television.

• ALWAYS read and follow all instructions for proper

use of your television.

• NEVER allow children to climb on or play on the

television or the furniture on which the television is

placed.

• NEVER place the television on furniture that can

easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be

pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the

television so that they cannot be tripped over, pulled

or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional

installation if you have any doubts about your ability

to safely mount your television.

• ALWAYS use a mount that has been recommended

by the television manufacturer and has a safety

certication by an independent laboratory (such as

UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the

television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you

are mounting the television is appropriate. Some

mounts are not designed to be mounted to walls and

ceilings with steel studs or cinder block construction.

If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people

is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE

IN YOUR HOME

• Many new television buyers move their older CRT

televisions into a secondary room after the purchase

of a at-panel television. Special care should be

made in the placement of older CRT televisions.

• ALWAYS place your older CRT television on furniture

that is sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser

where children may be tempted to use the drawers

to climb.

• ALWAYS make sure your older CRT television does

not hang over the edge of your furniture.

3.English

I

Important safety instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

Do not defeat the safety purpose of the polarized

or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Only use attachments / accessories specied by

the manufacturer.

Use only with the cart, stand,

tripod, bracket, or table specied

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart / apparatus combination

to avoid injury from tip-over.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

1 1.

12.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

13.

14.

Note to the CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, species that the cable ground shall be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

Example of antenna grounding as per NEC -

National Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250,

PART H)

GROUND CLAMPS

Wall mount bracket kit

Brand Model # Screw dimension

65PFL5922

55PFL5922

50PFL5922

SANUS F80b M6 x 1.378” (35mm)

43PFL5922 SANUS 25BB M4 x 1.378” (35mm)

•Your TV meets the VESA standard for wall mounting. Consult with your

local dealer for a wall mount bracket which is compatible with your TV

model.

•The recommended wall mount bracket kit (sold separately) allows the

mounting of the TV on the wall.

•For detailed information on installing the wall mount, refer to the wall

mount Instruction book.

•P&F USA is not responsible for any damage to the product or injury to

yourself or others if you elect to install the TV wall mount bracket or

mount the TV onto the bracket on your own.

•The wall mount bracket must be installed by experts.

P&F USA is not liable for these types of accidents or injuries noted

below.

•Install the wall mount bracket on a sturdy vertical wall.

•If installed onto a ceiling or slanted wall, the TV and wall mount bracket

may fall which could result in a severe injury.

•Do not use screws that are longer or shorter than their specified length.

If screws too long are used this may cause mechanical or electrical

damage inside the TV set. If screws too short are used this may cause

the TV set to fall.

•Do not fasten the screws by excessive force. This may damage the

product or cause the product to fall, leading to an injury.

•For safety reasons use 2 people to mount the TV onto a wall mounting

bracket.

•Do not mount the TV onto the wall mounting bracket while your TV is

plugged in or turned on. It may result in an electrical shock injury.

When installing the unit on the wall, allow this much space.

Top : 1 1.8 inches (30cm)

Left and right side : 5.9 inches (15cm)

Bottom : 3.9 inches (10cm)

4.English

1 Notice

Trademarks are the property of Koninklijke Philips N.V. or their respective

owners.

P&F USA reserves the right to change products at any time without being

obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate for the intended use of

the system. If the product or its individual modules or procedures are used

for purposes other than those specified herein, confirmation of their

validity and suitability must be obtained. P&F USA warrants that the

material itself does not infringe any United States patents. No further

warranty is expressed or implied.

P&F USA cannot be held responsible neither for any errors in the content

of this document nor for any problems as a result of the content in this

document. Errors reported to P&F USA will be adapted and published on

the P&F USA support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has

effective pixels of 99.999% or more, black dots or bright points of light

(red, green or blue) may appear constantly on the screen. This is a

structural property of the display (within common industry standards) and

is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to

the inside of the product. Repairs may only be done by service centers

and official repair shops. Failure to do so shall void any warranty, stated

or implied.

Any operation expressly prohibited in this manual, any adjustments or

assembly procedures not recommended or authorized in this manual

shall void the warranty.

Federal communications commission notice

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio or television technician for

help.

Declaration of conformity

Trade name :PHILIPS

Responsible party :P&F USA, Inc.

Model :65PFL5922, 55PFL5922, 50PFL5922,

43PFL5922

Address :PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.

Telephone number :1 866 202 5960

Modifications

This apparatus may generate or use radio frequency energy. Changes or

modifications to this apparatus may cause harmful interference.

Any modifications to the apparatus must be approved by P&F USA.

The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with

metallic RFI / EMI connector hoods to maintain compliance with FCC

Rules and regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B)

Analog and digital television receiving apparatus, Canada BETS-7 /

NTMR-7.

The following FCC/IC RSS applies to the wireless LAN

adapter included in this product.

FCC caution: Any changes or modifications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Country code statement

For product available in the USA market, only channel 1a1 1 can be

operated. Selection of other channels is not possible.

To maintain compliance with FCC RF exposure requirements, use

only belt-clips, holsters or similar accessories that do not contain

metallic components in its assembly. The use of accessories that do

not satisfy these requirements may not comply with FCC RF

exposure requirements and should be avoided.

This device complies with industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference and (2) this device must

accept any interference, including interference that may cause

undesired operation of the device.

5150-5250 MHz band is restricted to indoor operations only.

High-power radars are allocated as primary users (i.e. priority users)

of the bands 5250-5350 MHz and 5650-5850 MHz and that these

radars could cause interference and/or damage to LE-LAN

devices.

Compliance with IC requirement RSS-210 A9.4.4

Data transmission is always initiated by software, which is the

passed down through the MAC, through the digital and analog

baseband, and finally to the RF chip. Several special packets are

initiated by the MAC. These are the only ways the digital baseband

portion will turn on the RF transmitter, which it then turns off at the

end of the packet. Therefore, the transmitter will be on only while

one of the aforementioned packets is being transmitted. In other

words, this device automatically discontinue transmission in case

of either absence of information to transmit or operational failure.

5.English

Positioning the TV

•Large screen TVs are heavy. 2 people are required to carry and handle

a large screen TV.

•Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

•Install the unit in a horizontal and stable

position.

•Do not install the unit in direct sunlight or in a

place subject to dust or strong vibration.

•Depending on the environment, the

temperature of this unit may increase slightly.

This is not a malfunction.

•When installing this unit in a temperate environment, avoid a place with

rapid temperature changes.

–Operating temperature: 41°F (5°C) to 104°F (40°C)

•This unit should not be used in a tropical environment as it has not been

evaluated under such conditions.

•No objects should be placed directly on or under this unit, especially

lighted candles or other flaming objects.

•Depending on your external devices, noise or disturbance of the picture

and / or sound may be generated if the unit is placed too close to them.

In this case, please ensure enough space between the external devices

and the unit.

•Do not insert the AC power cord into the power socket outlet before all

the connections are made.

•Ensure that you always have easy access to the AC power cord and

outlet to disconnect the TV from the AC outlet.

•Before you move the TV, disconnect attached cables to prevent

damage to connectors, especially the TV tuner.

•Be sure to unplug the AC power plug from the AC outlet before moving

or carrying the unit.

•When moving the TV and then setting it down, please be careful not to

pinch the AC power cord under the unit.

•Do not place this unit in an area where it may be exposed to water, oil

or grease such as:

near a bathtub, basin, kitchen sink, washing tub, swimming pool, kitchen

exhaust fan, etc., or in a damp basement.

Regulatory notices

WARNING :To prevent injury, this apparatus must be securely attached

to the furniture / wall in accordance with the instructions.

Tipping, shaking or rocking the unit may cause injury /

death.

WARNING :Never place a TV in an unstable location. A TV may fall,

causing serious personal injury or death. Many injuries,

particularly to children, can be avoided by taking simple

precautions such as:

–Using cabinets or stands recommended by the

manufacturer of the TV.

–Only using furniture that can safely support the TV.

–Ensuring the TV is not overhanging the edge of the

supporting furniture.

–Not placing the TV on tall furniture (for example,

cupboards or bookcases) without anchoring both the

furniture and the TV to a suitable support.

–Not placing the TV on cloth or other materials that may

be located between the TV and supporting furniture.

–Educating the children about the dangers of climbing

on furniture to reach the TV or its controls.

If your existing TV is being retained and relocated, the same

considerations as above should be applied.

Do not place the unit on the furniture that is capable of being tilted by a

child and an adult leaning, pulling, standing or climbing on it. A falling unit

can cause serious injury or even death.

In order to avoid interruption of ventilation, this unit should not be placed

in built-in equipment such as a book cabinet, rack, etc., and the vents of

this unit should not be covered with anything such as a tablecloth, curtain,

newspaper, etc. Make sure that there is enough ventilation space

(4inches / 10cm or more) around this unit.

Press  to turn the unit on and go into standby mode. To completely turn

off the unit, you must unplug the AC power plug from the AC power

outlet.

Disconnect the AC power plug to shut the unit off when trouble is found

or not in use. The AC plug shall remain readily available.

AC power plug

Never use a gas duster on this TV.

The gas trapped inside of this unit may cause ignition and explosion.

Environmental care

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to recycle the

packaging.

For product recycling information, please visit - www.recycle.philips.com

End of life directives

Philips pays a lot of attention to produce environmental-friendly products

in green focal areas. Your new TV contains materials which can be

recycled and reused. At the end of its life, specialized companies can

dismantle the discarded TV to concentrate the reusable materials and to

minimize the amount of materials to be disposed of. Please ensure you

dispose of your old TV according to local regulations.

 Batteries usage

CAUTION :Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

WARNING :Batteries (battery pack or battery installed) should not be

exposed to excessive heat such as sunshine, fire or the like.

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,

ni-mh,Li-ion, etc.) batteries.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and

cadmium, however in certain localities, disposing batteries with

household waste is not permitted. Please ensure you dispose of

batteries according to local regulations.

Preparing to move / ship the unit

Please pack the unit properly by following the diagram on the carton (as

noted below).

•To avoid damage to the screen, do not pack the stand on the same side

as the TV screen, refer to the illustration above.

6.English

Copyright

All other registered and unregistered trademarks are the property of their

respective owners.

The terms HDMI and HDMI High-

Definition Multimedia Interface, and

the HDMI Logo are trademarks or

registered trademarks of HDMI

Licensing Administrator, Inc. in the

United States and other countries.

Dolby, Dolby Audio, and the double-D

symbol are trademarks of Dolby

Laboratories.

Sonic Emotion and the Sonic Emotion

logo symbol are registered trademarks

of sonic emotion ag.

Portions of this software are copyright © The FreeType Project

(www.freetype.org).

The American Academy of Pediatrics discourages television viewing for

children younger than two years of age.

Some features may require an always-on broadband internet

connection, firmware update and/or a minimum bandwidth. Internet

services vary by location.

P&F USA Inc. / P&F MEXICANA, S.A.de C.V. do not warrant access to

the portal or to any of the services, content, software and advertising.

P&F USA Inc./P&F MEXICANA, S.A. de C.V. or third party content/

service providers may, in their sole discretion, add or remove access to

any specific services, content, software and advertising at any time.

Although P&F USA Inc. / P&F MEXICANA, S.A. de C.V. will strive to

provide a good selection of services, content or software, P&F USA Inc./

P&F MEXICANA, S.A. de C.V. do not warrant continued access to any

specific services, and content or software.

7.English

2 Getting started

Features

•DTV / Analog TV / CATV

You can use your remote control to select channels which are broadcast in digital format and

conventional analog format. Also, cable and satellite subscribers can access their TV channels.

•Information display

You can display on the TV screen the title, contents (DTV only) and other information on the current

program.

•Autoprogram

This unit automatically scans and memorizes channels available in your area, eliminating difficult

setup procedures.

•Net TV

This unit lets you enjoy internet services. Use the remote control to browse the Net TV pages. You

can play movies and much more, all from your TV screen.

•Child lock

This feature allows you to block children’s access to inappropriate programs.

•Closed caption decoder

Built-in closed caption decoder displays text for closed caption supported programs.

•MTS / SAP tuner

Audio can be selected from the remote control.

•Auto standby

If there is no input signal and no operation for 15 minutes, the unit will go into standby mode

automatically.

•Sleep timer

You can set the unit to go into standby mode after a specific amount of time.

•Choices for on-screen language

Select your on-screen language: English, Spanish or French.

•Stereo sound function

•PLL frequency synthesized tuning

Provides free and easy channel selection and lets you tune directly to any channel using the

number and decimal point “•” keys on the remote control.

•Various adjustments for picture and sound

Customizes picture quality suitable for your room and sets your sound preference.

•EasyLink via HDMI link

EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to

your TV.

•HDMI input

•HDMI-DVI input

If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the

unit.

•Component video input

•PC input

•AV input

Audio and video input from an external device.

•USB terminal

The picture, music and video files stored on a USB memory stick can be played back on this unit.

•Digital audio output

•Headphone audio output

Headphone 3.5mm stereo jack for personal listening.

Supplied accessories

CAUTION: READ THIS FIRST

4

4

4

65PFL5922

55PFL5922

50PFL5922

43PFL5922

65”

55” / 50” / 43”

Quick start guideUser manual Caution sheet

TV base and Screws

(AAA, 1.5V x 2)

Remote control

and Batteries

SizeQuantityModel

Screws packed with this unit.

M4 x 0.984”(25mm)

M4 x 0.709”(18mm)

M4 x 0.551”(14mm)

* Caution sheet is not included in 43PFL5922.

Chromecast built-in TV Setup Guide for

Initial Installation

Note(s)

•If you lose the screws, please purchase the above-mentioned Phillips head screws at your local

store.

•If you need to replace these accessories, please refer to the part name or No. with the illustrations

and call our toll free customer support line found on the cover of this User manual.

W

When using a universal remote control to operate this unit.

•Make sure the component code on your universal remote control is set to our brand. Refer to

the instruction book accompanying your remote control for more details.

•We do not guarantee 100% interoperability with all universal remote controls.

Symbols used in this User manual

The following is the description for the symbols used in this User manual.

Description refers to:

Digital TV operation

Cable / NTSC (Analog) TV operation

•If neither symbol appears, the operation is applicable to both.

8.English

Continued on next page.

Unpacking

It is recommended that two or more people remove the TV set from the

box. Be careful not to injure your fingers and keep children away during

assembly.

(65PFL5922)

1Open the top flaps of the box.

2Remove all accessories.

Caution(s)

•DO NOT take the TV set out of the box yet.

3Remove the packing joints from the box.

4Remove the outer slipbox with care.

5Support the top of the TV set with a hand to prevent the TV from

falling.

6Unhinge the retaining tabs and unfold the left and right side of the

bottom packaging.

9.English

Continued on next page.

(55PFL5922, 50PFL5922)

1Open the top flaps of the box.

2Remove all accessories.

3Prepare a table and cover the top of it with a table cloth, blanket or

such to avoid damage to the TV set. Support both sides of the TV set

and, move it onto the table.

4Carefully lay the TV set, with the screen side down, on the table so

as not to deform or damage Decoration plate of the bottom of the

unit.

Protect

the plate

with care

Installing the stands

(65PFL5922)

1Remove both of the bottom polystyrene foam bases. Carefully tear

the plastic bag until the bottom corner of the TV is exposed.

•Support the top of the TV set at all times to prevent the TV from

falling.

Caution(s)

•Before installing the matching stand, remove the protective cardboard and carefully peel away

the film from the area so that it will not get stuck between the unit and the stand.

2Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the

matching stand upward until it fits the main unit.

3Fasten the matching stand to the TV with 2 screws (included).

2 screws

required

4In the same manner as step 2, install the other stand.

10 .English

Continued on next page.

5Fasten the other stand to the TV with 2 screws (included).

2 screws

required

6Both stands should now be securely fastened.

(55PFL5922, 50PFL5922)

1Remove the tape on the bottom of the TV set and the plastic bag.

2Fasten the matching stand to the TV with 2 screws (included). While

fastening the screws, hold the stand to prevent it from falling.

Caution(s)

•Before installing the matching stand, remove the protective cardboard and carefully peel away

the film from the area so that it will not get stuck between the unit and the stand.

2 screws

required

3Fasten the other stand to the TV with 2 screws (included). While

fastening the screws, hold the stand to prevent it from falling.

2 screws

required

4Both stands should now be securely fastened.

11 .English

Continued on next page.

(43PFL5922)

1

Protect

the plate

with care

2

×4

3

Note(s)

•A wide open space is recommended for assembly.

•A Phillips-head screwdriver is required to fasten the stands to the TV set.

•When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly

attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

•To remove the stand from this unit, unscrew the Phillips-head screws by reversing the

procedure. Be careful not to drop the stand when you remove it.

Lifting the TV set

Carefully lift the TV set as shown in the illustration and place it onto a

stable, level surface.

Removing cardboard

Remove the cardboard attached to the screen. You are now ready to set

up and enjoy your Philips TV.

Installing the remote control batteries

1Slide the battery cover off the back of the remote control.

2Insert the two supplied batteries (AAA, 1.5V). Be sure the + and – ends

of the batteries line up with the markings inside the case.

3Slide the cover back into position.

Note(s)

•Remove the batteries if not using the remote control for an extended period of time.

12 .English

Continued on next page.

Remote control

o

p

r

q

n

m

b

a

c

d

g

e

h

k

f

l

j

i

 (POWER)

Turns the TV on from standby or off to standby.

SOURCE

Selects connected devices.

EasyLink buttons

 /  :Searches backward or forward through the disc.

 .:Starts, pauses or resumes playback.

.:Stops the disc playback.

' / (:Skips backward or forward chapters, titles or tracks on a

disc.

Note(s)

•Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)

compliant.

SAP

Selects audio mode (MONO / STEREO / SAP) / audio language.

MENU

Displays the main menu.

COLOR buttons

Works as direct access to user specified net apps.

!INFO

Displays information about the current program.

"OK

Press to decide the command of setting when the Main menu is

displayed.

# (NAVIGATION buttons)

Moves the cursor, selects the on-screen menu items.

$OPTIONS

Displays a list of menu items applicable to the highlighted object or

screen.

%CH + / –

Selects a channel.

&0 - 9 (NUMBER buttons)

Used to enter a channel / program number.

• (DOT) : Use with 0-9 to select digital channels.

For example, to enter 2.1, press

PREV.CH : Returns to the previously viewed channel.

' (MUTE)

Turns the sound on and off.

(VOL + / –

Adjusts the volume.

)BACK

Returns to the previous menu operation.

*FORMAT

Adjusts the picture size on the TV screen.

+CC

Selects closed caption settings (Off, On, CC w/ mute).

,Chromecast

Switches to Chromecast built-in TV input source.

13 .English

Continued on next page.

Control panel

f

cde

a

b

Remote control sensor

Receives IR signal from remote control.

CH + / –

Selects a channel. In the menu screen, moves the cursor

up (+) / down (–).

(POWER)

Turns the TV on or switches the TV into standby mode.

MENU

Opens the main on-screen menu.

SOURCE

Selects connected devices.

VOL + / –

Adjusts the volume. In the menu screen, moves the cursor

left (+) / right (–).

VOL + : Volume up

VOL – : Volume down

Terminals

m

n

g

k

h

j

l

i

!75 ohm cable / Antenna connection

Signal input from an antenna or cable / satellite set-top boxes.

"Analog audio (L/R) input jacks

Connect analog audio signals from;

–HDMI-DVI / Analog audio (L/R) jacks signal

–Component video / Analog audio (L/R) jacks signal

–Composite video / Analog audio (L/R) jacks signal

–PC connection / Analog audio (L/R) jacks signal with stereo mini 3.

5mm plug audio cable on PC

#Digital audio output jack

Digital audio (S/PDIF) output to home theaters and other digital audio

systems.

$Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for

VIDEO

Composite video input (VIDEO) jack is a shared jack with component

video input (Y) jack. Green / Yellow color orientation depends on

model.

%Ethernet port

For internet connection using an Ethernet cable with an RJ-45

connector.

&HDMI input jack(s)

Digital audio and video input from high definition digital devices such

as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s,

etc.

*For HDMI 2 only

In addition to normal HDMI and HDMI-DVI functionality, it outputs

TV audio to an HDMI-ARC-compliant device, such as a home

theater system.

'Headphone audio output jack

Headphone 3.5mm stereo jack for personal listening.

(USB terminal

Data input from USB memory stick only.

Do not connect any device to this terminal such as digital camera,

keyboard, mouse, etc.

14 .English

Continued on next page.

Connecting Antenna or Cable / Satellite /

IPTV set-top box

Be sure your antenna or another device is connected properly before

plugging in the AC power cord.

If connecting to an antenna through an RF cable

Any DTV programs that are broadcast in your area can be received for

free through an antenna connection.

IN

IN

OUT

OUT

RF cable

RF cable

RF cable

Antenna

Antenna

Antenna

Cable

Cable

Cable

If connecting Cable / Satellite / IPTV set-top box using an RF

cable

If the TV is connected to a cable or set-top box via a coaxial connection,

set the TV to channel 3/4 or the channel specified by the service

provider.

IN

IN Antenna

Antenna

Antenna

Set-top box

Set-top box

Set-top box

RF cable

RF cable

RF cable

OUT

OUT

OUT

IN

IN

RF cable

RF cable

RF cable

If connecting Cable / Satellite / IPTV set-top box using an HDMI

cable

If the TV is connected to a cable / satellite set-top box via an HDMI cable,

make sure you select the correct source by using SOURCE.

IN

IN

IN

IN

OUT

Set-top box

RF cable

HDMI cable

HDMI cable

HDMI cable

If connecting Cable / Satellite / IPTV set-top box using

component video input

If the TV is connected to a cable / satellite set-top box via component

video input, make sure you select the correct component video source

by using SOURCE.

Set-top box

Set-top box

Set-top box

IN

IN

RF cable

RF cable

RF cable

OUT

OUT

OUT

Component (Y/Pb/Pr)

video cables

Component (Y/Pb/Pr)

video cables

Component (Y/Pb/Pr)

video cables

IN

IN

OUT

OUT

OUT

Audio (L/R) cables

Audio (L/R) cables

Audio (L/R) cables

IN

IN

Connecting a Cable / Satellite / IPTV set-top box, Blu-

ray disc / DVD recorder via composite connectors and

analog audio

Do not place your recorder too close to the screen because some recorders

can be susceptible to harmful interference from the TV.

Cable

OUT

RF cable

IN

IN

IN

OUT

IN

OUT

IN

IN

IN

OUTOUT

RF cable IN

Satellite

IN

Cable

Video +

Audio(L/R)

cables

Video + Audio(L/R)

cables

Video + Audio(L/R)

cables

Video + Audio(L/R)

cables

Blu-ray disc / DVD recorder

Set-top box

Note(s)

•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further

information.

•Depending on your antenna system, you may need different types of combiners (mixers) or

separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz

or 2GHz.

•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the

antenna input jack before moving the unit.

•If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor

or attic antennas will be more effective than a set-top box or inside antenna.

•To turn on your reception source easily between antenna and cable, install an antenna

selector.

•If you are not receiving a signal from your cable service, contact the cable provider.

Plugging in the AC power cord

Make sure that the AC power cord must be plugged to an AC outlet after

all the necessary connections are made.

Caution(s)

•Connect the analog audio signal cables from the external device to the analog audio L/R input

jacks.

•If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.

Note(s)

•Each time you plug in the AC power cord, no operations will be performed for several seconds.

This is not a malfunction.

15 .English

Continued on next page.

No supplied cables are used with these connections:

•Please purchase the necessary cables at your local store.

B

Before you connect the AC power cord:

Be sure other devices are connected properly before plugging in the AC

power cord.

Selecting your connection quality

HDMI - Highest quality

Supports high-definition digital signals and gives highest picture and

sound quality. Video and audio signals are combined in one cable. You

must use HDMI for full high-definition video and to enable

EasyLink(HDMI CEC).

Note(s)

•Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of

digital rights management that protects high-definition content in Blu-ray discs or DVDs.

•The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of

TV audio to an HDMI-ARC-compliant device.

Component (Y Pb Pr) - High quality

Supports high-definition analog signals but gives lower picture quality

than HDMI. Component (Y/Pb/Pr) video cables combine red / green /

blue video cables with red / white audio (L/R) cables. Match the cable

colors when you connect to the TV.

Composite - Basic quality

For analog connections. Composite video / Audio analog cable usually

combine a yellow video cable with red / white audio (L/R) cables. With

this unit, yellow cable must be connected to Y (green) jack on the

component video input jacks.

Connecting your devices

HDMI digital connection

HDMI connection offers the highest picture quality.

HDMI (High-Definition Multimedia Interface) transports high-definition

digital video and multi-channel digital audio through a single cable.

HD game console

or

Blu-ray disc / DVD player

or

Set-top box

OUT

IN

IN

IN

HDMI cable

HDMI cable

HDMI cable

Note(s)

•If there are issues with picture/color and/or sound when connecting an external device using

the HDMI port, please try switching the HDMI mode. (Refer to HDMI mode  p. 35)

•Some HDMI cables and devices may not be compatible with the TV due to different HDMI

specifications.

•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

recommended for the better compatibility.

•The unit accepts 480i / 480p / 720p / 1080i, 1080p, 2160p 24/30/60Hz of video signals, 32kHz/

44.1kHz and 48kHz of audio signals.

•This unit accepts LPCM, AC-3, DD+ audio signal.

•This unit accepts only signals in compliance with EIA861.

HDMI-DVI connection

This unit can be connected to your device that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it requires

audio cable for analog audio signal as well.

Cable receiver or

set-top box with

the DVI output jack

OUT

HDMI-DVI

conversion cable

HDMI-DVI

conversion cable

HDMI-DVI

conversion cable

IN

IN

IN

OUT

Audio (L/R) cables

IN

IN

IN

Note(s)

•Some HDMI cables and devices may not be compatible with the TV due to different HDMI

specifications.

•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

recommended for the better compatibility.

•The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals.

•HDMI-DVI connection requires separate audio connections as well and the audio signals are

output as analog (L/R) audio.

•DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

16 .English

Continued on next page.

HDMI-ARC connection

HDMI-ARC allows you to use EasyLink to output TV audio directly to a

connected audio device, without the need for an additional digital audio

cable.

OUT

HDMI cable

HDMI cable

HDMI cable

HDMI 2 IN only

HDMI 2 IN only

HDMI 2 IN only

Digital home theater

amplier that supports

HDMI-ARC

Note(s)

•The HDMI 2 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital

audio to an HDMI home theater system.

•Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the

device using an HDMI cable attached to HDMI-ARC connectors.

Component analog video connection

Component analog video connection offers better picture quality for

video devices connected to the unit.

If you connect to the unit’s component video (Y/Pb/Pr) input jacks,

connect analog audio cables to the analog audio (L/R) input jacks.

Blu-ray disc /

DVD recorder

Blu-ray disc /

DVD recorder

Blu-ray disc /

DVD recorder

or

or

Set-top box

Set-top box

Set-top box

OUT

OUT

OUT

Component (Y/Pb/Pr)

video cables

Component (Y/Pb/Pr)

video cables

Component (Y/Pb/Pr)

video cables

IN

IN

IN

OUT

OUT

OUT

Audio (L/R) cables

Audio (L/R) cables

Audio (L/R) cables

IN

IN

Note(s)

•The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection.

Composite analog video connection

Composite analog video connection offers standard picture quality for

video devices connected to the unit.

If you connect to the unit’s component / composite video (Y/VIDEO) input

jack (green), connect audio cables to the audio (L/R) input jacks. When

the audio is monaural, then only connect to the audio L input jack.

DVD player

DVD player

DVD player

OUT

OUT

OUT

Video + Audio(L/R) cables

Video + Audio(L/R) cables

Video + Audio(L/R) cables

Note(s)

•With this unit, yellow cable must be connected to Y (green) jack on the component video input

jacks.

•Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the

component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an

unstable picture.

Connecting the TV to the internet using an Ethernet

cable

LAN

Internet

Internet

Internet

Network provisioning

equipment

Network provisioning

equipment

Network provisioning

equipment

Ethernet cable

Ethernet cable

Ethernet cable

Note(s)

•Please purchase shielded Ethernet cables at your local store and use them when you connect

to network equipment.

•Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging

the unit.

•If your telecommunications equipment (modem, etc.) does not have broadband router

functions, connect a broadband router.

•If your telecommunications equipment (modem, etc.) has broadband router functions but there

is no vacant port, then add a hub.

•For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

•Do not connect your PC directly to the Ethernet port of this unit.

17 .English

Continued on next page.

Connecting the TV to the internet using a wireless LAN

WLAN

LAN

Network provisioning

equipment

Ethernet

cable

Broadband router

Broadband router

Broadband router

Internet

Internet

Internet

Note(s)

•Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports

IEEE 802.1 1 a/b/g/n/ac. (n is recommended for stable operation of the wireless network.)

•This unit does not support Ad-hoc mode.

•Other radio devices or obstacles may cause interference to the wireless network connection.

Digital audio output connection

If you connect this unit to an external digital audio device, you can enjoy

multi-channel audio like 5.1ch digital broadcasting sound.

Use a digital audio optical cable to connect the unit to external digital

audio devices.

Digital home

theater amplier

OUT

OUT

OUT

IN

IN

Digital audio

optical cable

Digital audio

optical cable

Digital audio

optical cable

PC connection

HDMI connection

This unit can be connected to your PC that has an HDMI terminal. Use an

HDMI cable for this digital connection.

PC

PC

OUT

OUT

OUT

HDMI cable

HDMI cable

HDMI cable

IN

IN

HDMI-DVI connection

This unit can be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this video digital connection and

it requires stereo mini 3.5mm plug audio cable for analog audio signal as

well.

PC

PC

OUT

OUT

OUT

HDMI-DVI

conversion cable

HDMI-DVI

conversion cable

HDMI-DVI

conversion cable

IN

IN

IN

OUT

OUT

OUT

Stereo mini 3.5 mm plug audio cable

Stereo mini 3.5 mm plug audio cable

Stereo mini 3.5 mm plug audio cable

IN

IN

IN

18 .English

Continued on next page.

The following PC-input video signals can be displayed:

Format Resolution Refresh rate

VGA 640 x 480

60Hz

SVGA 800 x 600

XGA 1,024 x 768

WXGA 1,280 x 768

1,360 x 768

FHD 1,920 x 1,080

24/30/60Hz

UHD 3,840 x 2,160

4,096 x 2,160

Other formats or non-standard signals will not be displayed correctly.

Note(s)

•Please purchase a HDMI-DVI conversion cable that has a ferrite core.

•The following operations may reduce noise.

–Attach a ferrite core to the AC power cord of your PC.

–Unplug the AC power cord and use the built-in battery of your portable / laptop PC.

•Some HDMI cables and devices may not be compatible with the TV due to different HDMI

specifications.

•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

recommended for the better compatibility.

•The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals only when using the

HDMI connection and HDMI-DVI connection.

•HDMI-DVI connection requires separate audio connections as well and the audio signals are

output as analog (L/R) audio.

•DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

USB memory stick

This unit offers easy playback of picture, music and video files.

Insert the USB memory stick into the USB terminal shown below.

For a complete list of file formats and specifications supported, refer to

USB Section  p. 27

Note(s)

•The unit recognizes only a USB memory stick.

•Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit.

(Not supported.)

•Always insert a USB memory stick directly to this unit.

•A USB memory stick is not supplied with this unit.

•We do not guarantee that all USB memory sticks can be supported by this unit.

•Be sure to keep a backup copy of the original files on your USB device before you play them

back on this unit. We have no responsibilities for damage or loss of your USB stored data.

•To protect your USB memory stick files from being erased place the write protect sliding tab in

the protect position (if available).

•When you are ready to remove a USB memory stick, set the unit to go into standby mode to

avoid any damage to your data and the unit.

•A USB memory stick that requires its own driver or the device with a special system such as

fingerprint recognition are not supported.

•This unit is not allowed to use the USB memory stick which requires an external power supply

(500mA or more).

19 .English

Continued on next page.

These operations are accessible by remote control.

Some may also be accessible by the main unit's control panel.

TV initial setup

This section will guide you through the unit’s Initial setting which includes

selecting a language for your on-screen menu, country, location and

Autoprogram, which automatically scans and memorizes viewable

channels. You can also set the network connection in this setting.

B

Before you begin:

Make sure the unit is connected to an antenna or cable.

1After making all the necessary connections, press  to turn on the

unit.

•It may take a few moments to turn on the unit for the first time.

•TV initial setup menu appears automatically after the unit is turned

on.

2Follow the on-screen instructions to complete your TV initial setup.

321

Remote control Batteries

Thank you for purchasing this Philips Chromecast built-in TV.

Merci d'avoir acheté ce Chromecast built-in TV de Philips.

Gracias por comprar esta Chromecast built-in TV de Philips.

Insert 2 batteries in the remote control

Ponga las 2 baterías en el control remote

Insérez les 2 piles dans la télécommande

Next

3Use  to select the location in the middle of the TV screen, then

press OK.

132

Home

Retail

-Location:

“Home” mode is optimized for ecient energy usage for

home use.

“Retail” mode is optimized for Store Demo with xed settings.

-Région:

Le mode « Home » est optimisé une utilisation ecace de

l'énergie pour un usage à domicile.

Le mode « Retail » est optimisé pour la démonstration en

magasin avec des réglages xes.

-Ubicación:

El modo "Home" está optimizado para el uso eciente de

energía para uso en casa.

•Selecting Location to Retail will display retail demo on the screen.

If you wish to turn off this demo in a retail environment, please refer

to Retail Demo  p. 36.

4Use  to select the standby mode in the middle of the TV screen,

then press OK.

•Active standby enables the TV to turn on fast, whereas ECO

standby is consumes less energy.

5After the standby mode setting is completed, Chromecast built-in TV

setup screen will appear.

•For Chromecast built-in TV setup, refer to Chromecast built-in TV

setup  p. 22.

•Chromecast built-in TV is controlled from devices on the same Wi-

Fi network, such as Smartphones, Tablets, or computers.

•After Chromecast built-in TV setup is completed, if you press any

button except Chromeast (button), TV initial setup resumes.

6On Chromecast built-in TV setup screen, if you press MENU, select

OK and press OK to continue, the built-in initial setup wizard will

continue.

7Use  to select the on-screen language, Voice guide and TV

placement in the middle of the TV screen, then press OK.

8Use  to select the signal type.

•If the TV is connected to a cable or satellite set-top box, select the

2nd one and skip to step 10.

12 43

Installation

Set-top box

Select "Set-top box" to set up a TV

signal from a cable TV box

or satellite TV receiver.

Antenna

Select "Antenna" to set up a TV

signal from a cable TV wall jack

or a standard TV antenna.

20 .English

Continued on next page.

9Use  to select Antenna for TV channels or Cable for CATV

channels, then press OK.

123 4

Installation

Skip

Cable

Antenna

Now select either Antenna or

Cable, using up/down key of the

remote control. Once you have

made your selection, press the

OK button to proceed.

Make sure that you have

attached your antenna or cable

signal into the jack on the back of

your TV labeled "ANTENNA IN".

–When Antenna is selected, the TV detects antenna signals. It

searches for DTV and analog TV channels available in your area.

–When Cable is selected, the TV detects signals supplied by cable.

It searches for DTV, analog TV and cable channels available in

your area.

•Auto programming will begin.

0

0

123 4

Installation

Stop

Total progress:

Analog channels found:

Digital channels found:

Please wait until you see the Auto

Programming complete message.

Digital channels will take longer

than Analog to nd and program.

Auto programming may take more

than 20 minutes to complete.

System searching. Please wait…

10 Use  to select your preferred picture setting, then press OK.

21

Sports

Vivid

Standard

Skip

Please select your preferred picture mode.

11 Use  to select your preferred sound setting, then press OK.

21

Sports

Vivid

Standard

Skip

Please select your preferred sound mode.

12 After TV initial setup is completed, a message will appear if there is a

software update available for the TV.

Note(s)

•If you are not receiving a signal from your cable service, contact the cable provider.

•If you press  during Autoprogram, this setup of TV channels will be cancelled.

•The initial Autoprogram function can be executed for either Antenna or Cable only once. When

you change the connection (Antenna / Cable), select Search for channels again.  p. 38

A

After an TV initial setup is completed...

•If you want to scan the channels automatically again.

Search for channels  p. 38

•If you want to change to another language.

Language  p. 35

•If you want to change the location setting.

Location  p. 35

•If you want to restore the picture and sound setting.

Picture and sound setup  p. 31

•If you want to change the Chromecast built-in TV setting.

Chromecast built-in TV setup  p. 22

21 .English

Continued on next page.

Chromecast built-in TV setup

P

Prerequisites for Chromecast built-in TV setup

•iOS or Android™ Smartphone / Tablet with Bluetooth and location

services turned on.

•Have your wireless router’s SSID and password handy.

1During TV initial installation

•As the TV initial installation proceeds, the “Set me up” screen for

Chromecast built-in TV setup will appear. Refer to the step 5 in TV

initial setup  p. 20.

•From here on, you need to use your mobile device to set up

Chromecast built-in TV.

2App download / installation

•On your mobile device, access the URL to download and install the

Google Home App.

http://www.chromecast.com/setup

for iOS

for Android™

3App configuration

•Run the Google Home App. If the “DEVICES” icon appears on

your mobile device, touch the icon to proceed, then select the

same device name (Chromecast****) as the one shown at the

bottom left corner of the TV screen.

•The “CONTINUE” button appears on your mobile device. Pressing

it moves to the 4-letter code screen. Confirm that the code on your

mobile device matches the code shown on the TV screen. If they

match, press the “I SEE THE CODE” button on your mobile device.

4Network configuration

•The “OK” button appears on your mobile device, complete settings

on this screen and then touch “OK” to proceed.

Pressing it moves to the wireless network setting screen. Select your

wireless network name (SSID) and enter the password to proceed.

5Ready to Cast

•Chromecast built-in TV setup has completed. Now, your TV is ready

to receive a Cast from your mobile device. If a newer firmware is

available, update will start.

6Casting a video

•On a Cast-enabled App such as YouTube™, tap the Cast icon -

to cast the video to your TV.

X:XX XX:XX

X:XX

XXX views

XXX subscribers

XX XX

XX:XX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXX Subscribe

XX:XX

XXXXXX

XXX views - X month ago

XXXXXXXXXXXX

XXXXXX

XXX views - X month ago

XXXXXXXXXXXX

7For TV viewing

•In order to view TV, the TV initial installation needs to be completed

after the Chromecast built-in TV setup. On the TV remote control,

press SOURCE and select any input other than Chromecast

built-in TV. The screen will switch to the selected source and

prompt you to complete the remainder of the initial setup wizard.

Note(s)

•For more info,

www.google.com/cast/learn/

www.philips.com/support

Note(s)

•The Chromecast built-in TV setup instructions in this user manual are current as of the

publication release of this document. Google continuously releases updates to its apps; if there

is a discrepancy between the app and instructions on this page, please follow the setup

instructions within the app.

22 .English

3 Use your TV

Switching on your TV and putting it in

standby mode

Remote control

TV

To turn the TV on from standby or off to standby

•Press  on the TV or the remote control.

Note(s)

•Energy consumption contributes to air and water pollution. When the AC power cord is plugged

in, your TV consumes energy with a very low standby power consumption.

Adjusting volume

Remote control

TV

To decrease or increase volume

•Press VOL + / – on the TV or the remote control.

VOL + : Volume up

VOL – : Volume down

To mute or unmute sound

•Press  on the remote control to mute the sound.

•Press  again or VOL + / – to recover the original sound.

Switching channels

Remote control

TV

To select channels by using CH + / –

•Press CH + / – on the TV or the remote control.

To select channels by using the NUMBER buttons

Digital TV operation

•For digital channels, press a number followed by a dot “•” and the

corresponding sub channel number.

–When selecting digital channel 1 1. 1

Be sure to press • before entering the subchannel number.

Cable / NTSC (Analog) TV operation

–When selecting cable or analog channel 1 1

Press PREV.CH to return to the previously viewed channel.

Note(s)

•To select the non-memorized channels, use the NUMBER buttons.

•Channel not available or No signal will appear on the TV screen after the subchannel broadcast

is over.

•Audio only message will appear on the TV screen, when you receive only sound signal.

23 .English

Continued on next page.

Watching channels from an external

device

Switching each input mode can easily switch with the remote control

between TV and external devices when they are connected to the unit.

1Turn on the set-top box or the connected device.

Press SOURCE and use  to select the set-top box or the

connected device and wait a few seconds till the picture appears.

HDMI3

HDMI2

HDMI1

Cast

TV

Use the remote control of the set-top box or the connected device

to select channels.

Lock or unlock your device from the menu

This section describes how to lock or unlock specified device.

1Press SOURCE on the remote control.

2Use  to select a device to lock or unlock.

3Press OPTIONS on the remote control.

4Use  to select Lock or Unlock, then press OK.

•If device lock is unlocked, Lock will be displayed. If device lock is

locked, Unlock will be displayed at the top right of the device

icons.

5Enter your PIN. Change PIN  p. 41

Changing device type

You can change device icons displayed in the source list.

1Press SOURCE on the remote control.

2Use  to select the desired device.

3Press red button on the remote control.

4Use  to select the desired type, then press OK.

T

To reset the type

•Press OPTIONS on the remote control at step 3, then select Original

icon.

Scan connections

You can rescan TV connections and update the source list.

Before you begin:

You must set On in Master EasyLink.  p. 36

1Press SOURCE on the remote control.

2Use  to move the cursor to any device.

3Press OPTIONS on the remote control.

4Use  to select Scan connections, then press OK.

Create a list of favorite channels

You can create lists of your preferred TV channels so that you can find

those channels easily.

1Press OK while viewing a TV program.

2Use  to select the desired channel, then press yellow

button.

3Use  to select the desired favorite list (Favorites 1 - Favorites 4),

then press OK to add or remove on the list of favorite channels.

•, indicates that the channel is added.

• indicates that the channel is removed.

•The channel will be marked with ! icon.

Display the list of favorite channels

1Press OK while viewing a TV program.

2Use  to select Favorites.

To change the favorite list

1Press blue button.

2Use  to select the desired favorite list (Favorites 1 - Favorites 4).

To remove a channel from the favorite list

1Select the desired channel, then press yellow button.

2Use  to select Yes, then press OK.

24 .English

Continued on next page.

Changing Picture format

Display modes can be selected when your TV receives a 16:9 or 4:3 video

signal.

Three types of display modes can be selected for a PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal (4096 x 2160p)

FullUnscaled

For 16:9 video signal (3840 x 2160p)

FullUnscaled

For 16:9 video signal (not 2160p)

Wide screen

4:3Automatic

Full

Automatic

Other than DTV and HDMI connected devices,

enlarges the picture to best fit the screen. DTV and

HDMI connected devices display the picture at its

original size.

The subtitles may remain visible.

4:3

Displays a 16:9 picture at a 4:3 size; the picture is

shortened horizontally. Sidebars appear on both

edges of the screen.

Wide screen Displays a 16:9 picture that is stretched

horizontally and vertically.

Unscaled Displays a 16:9 picture at its original size.

Full

Displays a scaled 16:9 picture. Bars appear on both

the upper and lower portions of the screen

depending on the type of video signal.

For 4:3 video signal

Wide screen

Movie expand 16:9

Movie expand 14:9

4:3Super zoomAutomatic

Automatic

Other than DTV and HDMI connected devices,

enlarges the picture to best fit the screen.

DTV and HDMI connected devices display the

picture at its original size. The subtitles may remain

visible.

Super zoom

Displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally and vertically and its left

and right edges are enlarged. This crops out some

of the top and bottom of the picture.

4:3 Displays a 4:3 picture at its original size.

Sidebars appear on both edges of the screen.

Movie expand 14:9

Displays a 4:3 picture at a 14:9 size; the picture is

stretched horizontally and vertically.

This crops out some of the top and bottom of the

picture. Sidebars appear on both edges of the

screen.

Movie expand 16:9

Displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally and vertically. This crops

out some of the top and bottom of the picture.

Wide screen Displays a picture that is stretched out of

proportion to fill the screen.

For PC input signal

UnscaledWide screen4:3

•This unit can also be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this video connection and it

requires stereo mini 3.5mm plug audio cable for analog audio signal as

well.

•Refer to 16:9 video signal on this page if the PC has HDMI output.

4:3 Displays a proportionately stretched picture.

Sidebars appear on both edges of the screen.

Wide screen Displays a picture that is stretched out of

proportion to fill the screen.

Unscaled Displays a picture in its original size.

If the signal source has side or top-bottom bars inserted into the picture,

the Picture format function will not eliminate them.

25 .English

Continued on next page.

TV screen information

You can display the currently selected channel or other information such

as the aspect ratio on the TV screen.

In the digital mode, the detailed broadcasting information for the current

off-the-air channel such as program title and program guides are

displayed.

1Press INFO.

e

f

g

i

h

ba c d

1

1.1 KABC A Day of Memories

1080i

None

All

English

Stereo

Full

Sleeptimer:

Rating:

Favorites:

Audio language:

Sound mode:

Picture format:

Resolution:

English audio with description.

Close

Channel number / Input mode

Switching channels  p. 23

Watching channels from an external device  p. 24

Broadcast station

Program title (for DTV only)

CC (not available if Closed caption is set to Off)

Caption settings  p. 37

Program’s image aspect ratio

Changing Picture format  p. 25

Audio language (DTV) / Audio mode (Analog TV)

Sound  p. 33

!Favorites

Create a list of favorite channels  p. 24

"Child lock rating

Child lock  p. 39

#Remaining time on sleep timer

Sleeptimer  p. 34

2Press INFO to hide the information.

Note(s)

•While the program guide is displayed, the closed caption function is interrupted.

•The information display will automatically disappear in 5 seconds.

Using options menu

You can access to some TV settings directly by using OPTIONS.

1Press OPTIONS to display options menu, then press OK.

2Use  to select a desired setting, then press OK.

a b c d

Options

Options

Following settings can be configured.

Voice guide toggle To set Voice guide on or off.

Voice guide toggle  p. 37

Closed captions To choose the Closed captions display setting.

Closed captions  p. 37

Digital audio

language

To Select the language according to your

preference.

(It differs depending on the program.)

Digital audio language  p. 41

Mono/Stereo To Select an audio format.

Mono/Stereo  p. 41

Controls

If you have our brand products such as Blu-ray disc player or DVD

recorder that are compatible with EasyLink functions, connect them

to this unit via an HDMI cable so you can simply operate various items

from this unit’s remote control.

Before you begin:

select a device connected to an HDMI connection.  p. 24

You must set On in Master EasyLink.  p. 36

Otherwise, LINK does not work even if you connected our brand

devices to this unit.

1Press OPTIONS to display options menu.

2Use  to select Controls then press OK.

3Use  to select the desired item, then press OK.

Device-menu Controls the menu of your connected EasyLink

device.

Device-contents Controls the top menu of your DVD or Blu-ray

discs.

Device-favorite Controls the pop-up menu of your Blu-ray discs.

Note(s)

•Some of EasyLink functions may not be available depending on your EasyLink devices or

discs.

•You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC)

setting is also set to On.

•We do not guarantee 100% interoperability with other brands of HDMI link compliant devices.

26 .English

Continued on next page.

Picture and sound

Following settings can be configured.

Auto picture To set predefined picture mode.

Picture  p. 31

Auto sound To set predefined sound mode.

Sound  p. 33

Headphone

volume

To adjust headphone volume.

Sound  p. 33

TV speakers

To Select the audio output from the unit’s

speakers or not.

Sound  p. 33

Picture format To switch the TV aspect ratio.

Changing Picture format  p. 25

Setup To display setup menu.

ECO settings

Following settings can be configured.

Switch off timer

You can turn off the unit automatically when there

is no operation for specified time. In spite of this

setting, the unit goes into standby mode

automatically if there is no signal input and no user

operation for 15 minutes.

Press  repeatedly to change the amount of time

(increases the time by 30 minutes up to 240

minutes).

Each press of  will decrease the time by 30

minutes.

To cancel the timer, press  repeatedly until “0” is

displayed.

USB

Your TV is fitted with a USB connection that enables you to view photos,

listen to music or watch video files stored on a USB memory stick.

1Press SOURCE and use  to select USB, then press OK.

2Use  to select the desired file, then press OK.

USB DISK 2016_12_24 folder_A folder_B folder_C

Photo

Photo

•These recorded files must meet specifications shown below:

Picture (JPEG / Progressive JPEG)

JPEG Upper limit 4000x4000 pixels

Progressive JPEG Upper limit 1024x768 pixels

Music (MP3 / WAV / AAC)

MP3 Sampling frequency 16 kHz - 48 kHz

Constant bit rate 8 kbps - 320 kbps

WAV Sampling frequency 8 kHz - 48 kHz

Constant bit rate 64 kbps - 1.5 Mbps

AAC Sampling frequency 8 kHz - 48 kHz

Constant bit rate -

Video (MPEG / VOB / AVI / MP4)

Maximum video H.264, H.265/HEVC: 3840x2160@30fps,

MPEG: 1920x1080@60fps

Extension .avi .mpg,

.mpeg

.ts,

.trp,

.tp

.vob .mp4 .mkv

Video

codec

Audio

codec

MPEG1,

MPEG2,

MPEG4,

H.264

MPEG1,

MPEG2,

MPEG4

MPEG1,

MPEG2,

H.264,

H.265/

HEVC

MPEG1,

MPEG2

MPEG1,

MPEG2,

MPEG4,

H.264,

H.265/

HEVC

MPEG1,

MPEG2,

MPEG4,

H.264,

H.265/

HEVC

Dolby Digital YES YES YES YES YES YES

MPEG1/2 audio

layer1/2/3 YES YES YES YES NO YES

LPCM YES YES YES YES YES YES

AAC-LC YES YES YES YES YES YES

27 .English

Continued on next page.

Note(s)

•This unit accepts USB memory stick only. Other storage devices such as external HDD by USB

bus power will not work.

•Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly

insert the USB flash memory stick to this unit directly.

•We cannot be held responsible if your USB memory stick is not supported, nor will we accept

any liability for damage or loss of stored data.

•The USB memory stick is not supplied with this TV.

•A maximum of 1,023 folders or files can be recognized.

•A file name exceeding 256 characters or contains a dot character is not supported on this TV.

•A USB memory stick that required its own driver or the device with a special system such as

fingerprint recognition are not supported.

•Be sure to keep a backup copy of the original files on your USB device before you play them

back on this unit. We have no responsibilities for damage or loss of your USB stored data.

•To avoid damaging the USB memory stick and the unit always turn off the unit before you

remove the USB memory stick.

•This unit is not allowed to use the USB memory stick which requires external power supply (500

mA or more).

•This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32

file system. If the file is not supported, an error message appears.

•When the unit does not recognize the USB memory stick, try reconnecting it.

•Playing the files recorded with high bit rates, the images can be interrupted in some occasions.

•This unit does not support external subtitles.

•This unit cannot play back a file which goes over the limit of file restriction limit.

Viewing photos

1Use  to select Photo, then press OK.

2Use  to select the desired item, then press OK.

3Press OK or . to start a slide show of the files.

•Press OK or . to pause the slide show.

•The . icon appears.

•Press  or  to move between images.

•Press BACK or . to stop the slide show.

•Press OPTIONS to display the optional menu, then use  to

select the desired item.

Voice guide

toggle *1

Off Sets Voice guide to off.

On Sets Voice guide to on.

Repeat *2

Off Sets repeat playback to off.

One Sets repeat playback for a selected image file.

All Sets repeat playback for all image files in the

current folder.

Slide time *2

Short Switches to the next image in 5 seconds.

Medium Switches to the next image in 10 seconds.

Long Switches to the next image in 15 seconds.

Transitions *2

None No effect when switching images.

Dissolve Overlaps the next image on the current image.

Wipe right Pushes the current image out from left.

Wipe left Pushes the current image out from right.

Wipe up Pushes the current image out from bottom.

Wipe down Pushes the current image out from top.

Box in The next image comes to the center from the

outside.

Box out The next image goes to the outside from the

center.

Auto

picture *2

Selects the picture mode according to your preference.

(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving

and Internet video)

Rotate *3

0Displays an image in its original direction.

90 Rotates an image 90 degrees clockwise.

180 Rotates an image 180 degrees clockwise.

270 Rotates an image 270 degrees clockwise.

Zoom *3

1X Displays an image in its original size.

2X Magnifies a current image by 2 times.

4X Magnifies a current image by 4 times.

*1 Voice guide toggle is available in slide show and pause mode.

*2 You can set Repeat, Slide time, Transitions and Auto picture when

images are in slide show.

*3 You can set Rotate and Zoom when slide show is in pause mode.

28 .English

Continued on next page.

Playing music

1Use  to select Music, then press OK.

2Use  to select the desired item, then press OK.

3Press OK or . to play the selected files.

•Press OK or . to pause, then press OK or . again to resume.

•Press  to fast-forward search.

•Press  to fast-backward search.

•Press . to stop playback.

•Press OPTIONS to display the optional menu, then use  to

select the desired item.

Voice guide

toggle *

Off Sets Voice guide to off.

On Sets Voice guide to on.

Repeat

Off Sets repeat playback to off.

One Sets repeat playback for a selected music

file.

All Sets repeat playback for all music files in

the current folder.

Shuffle

Off Sets shuffle playback to Off.

On Sets shuffle playback for all music files in

the current folder.

TV Speakers

Off The sound will not be output from the

unit's speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control audio output from your

connected EasyLink compliant devices

with VOL + / – by using this unit's remote

control.

Auto sound Selects the sound mode according to your preference.

(Standard, Vivid, Sports, Movie, Music and News)

* Voice guide toggle is available in slide show and pause mode.

Playing movies

1Use  to select Movie, then press OK.

2Use  to select the desired item, then press OK.

3Press OK or . to play the selected files.

•Press OK or . to pause, then press OK or . again to resume.

•Press  to fast-forward search.

•Press  to fast-backward search.

•Press . to stop playback.

Press . to resume from the point at which playback was stopped.

Press OK to play from the beginning of the file.

•Press OPTIONS to display the optional menu, then use  to

select the desired item.

Voice guide

toggle *

Off Sets Voice guide to off.

On Sets Voice guide to on.

Repeat

Off Sets repeat playback to off.

One Sets repeat playback for a selected video

file.

All Sets repeat playback for all video files in

the current folder.

TV speakers

Off The sound will not be output from the

unit's speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control audio output from your

connected EasyLink compliant devices

with VOL + / – by using this unit's remote

control.

Auto picture

Selects the picture mode according to your preference.

(Standard, Natural, Vivid, Sports, Movie, Game, Energy

saving and Internet video)

Auto sound Selects the sound mode according to your preference.

(Standard, Vivid, Sports, Movie, Music and News)

* Voice guide toggle is available in slide show and pause mode.

Note(s)

•The resume information will be kept even when the unit is Turned off.

•If you play another file while the previously viewed file is being resumed, the resume information

of the previously viewed file will be deleted.

•The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.

29 .English

4 Getting more from your

TV

This section explains functionality of the main TV menu.

1Press MENU to display the main TV menu.

2Use  to select the desired menu item, then press OK.

Software

settings

Channel

settings

TV

settings

Update

software

Search for

channels

Picture and

sound setup

To quickly set basic picture and sound settings, press OK

Note(s)

•If you press MENU in Chromecast mode, only the TV settings menu is displayed.

•To access main TV menu while in Chromecast mode, change the source to any other source

other than Cast or USB and then press MENU.

Picture and sound

setup  p. 31

Guides you to get the best picture and sound settings.

TV settings  p. 31

Accesses menus that allow you to change picture, sound and

TV usage settings.

Search for channels  p. 38

Guides you through channel installation.

Channel settings  p. 39

Accesses menus that allow you to change channel settings.

Update software  p. 41

Guides you through an update of the TV software.

Software settings  p. 43

Accesses menus that allow you to change software settings.

30 .English

Continued on next page.

Picture and sound setup

B

Before you begin:

You must set Home in Location.  p. 35

Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

1Press MENU and use  to select Picture and sound setup,

then press OK.

2Follow steps 10 to 11 in TV initial setup  p. 21

TV settings

Picture

Before you begin:

You must set Home in Location.  p. 35

Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Picture, then press OK.

Accessibility

Mode selection

Picture format

Advanced settings

Pixel Plus Ultra HD

Sharpness

Tint

Color

Brightness

Contrast

Backlight

Auto picture

Installation

Features

Sound

Picture

Vertical position

Horizontal position

Chromecast Built-in TV settings

3

Use















to select the item you want to adjust, then press OK.

The following picture settings can be configured. Depending on the

format of the picture source, some picture settings are not available.

Auto picture

To set your TV to a predefined picture setting.

Personal The customized settings you

defined using the Picture menu.

Standard For normal TV viewing.

Natural

Ideal picture mode for viewing high

quality content without any picture

enhancements.

Vivid

Enhanced picture contrast and

sharpness for viewing in a well-lit

room.

Sports Brilliant picture settings for high

action.

Movie Deep picture settings for a

cinematic experience.

Game Optimized for PCs and game

consoles.

Energy saving Eco TV settings for low power

consumption.

Internet video Optimized for low bit-rate internet

video.

When you adjust the following settings, Personal picture will be set

automatically.

Cursor Cursor 

Backlight

To reduce power

consumption and

brightness

To increase power

consumption and

brightness

Contrast To decrease contrast To increase contrast

Brightness To decrease brightness To increase brightness

Color To decrease color

intensity

To increase color

intensity

Tint To add green To add red

Sharpness To soften To sharpen

Pixel Plus Ultra HD

Enters sub-menus to adjust the following settings:

(Dynamic contrast, Color enhancement, Black

stretch, Perfect Motion Rate, 4K UHD Upscaling,

Macro Dimming, Noise reduction and MPEG

artifact reduction)

Advanced settings

Enters sub-menus to adjust the following settings:

(Color alignment, Custom color management,

HDR mode, Gamma, Blue stretch and Film mode)

Picture format

Automatic

Changing Picture

format  p. 25

Super zoom

4:3

Movie expand 14:9

Movie expand 16:9

Wide screen

Full

Unscaled

Mode selection

PC

To turn off image

enhancement features

which makes the TV to

act purely as a monitor

HDTV

To enable image

enhancement features

to improve picture

quality

Cursor Cursor 

Horizontal position To move PC screen left To move PC screen right

Vertical position To move PC screen

down To move PC screen up

31 .English

Continued on next page.

Y

You may adjust picture quality and enhancement settings using Pixel

Plus Ultra HD and Advanced settings sub menus.

Color enhancement

MPEG artifact reduction

Dynamic contrast

4K UHD Upscaling

Perfect Motion Rate

Black stretch

Noise reduction

Mode selection

Picture format

Advanced settings

Sharpness

Tint

Color

Brightness

Contrast

Backlight

Auto picture

Pixel Plus Ultra HD

Maximum

Medium

Minimum

O

Macro Dimming

Vertical position

Horizontal position

Dynamic

contrast

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Color

enhancement

Off To set color enhancement to off

On To make colors more vivid and bright

Black

stretch

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Perfect

Motion Rate

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

4K UHD

Upscaling

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Macro

Dimming

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Noise

reduction

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

MPEG

artifact

reduction

To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Blue oset

Green oset

Red oset

Blue gain

Green gain

Red gain

Mode

Custom color management

Gamma

Film mode

Color alignment

Mode selection

Picture format

Advanced settings

Sharpness

Tint

Color

Brightness

Contrast

Backlight

Auto picture

Pixel Plus Ultra HD

Blue stretch

HDR mode

Vertical position

Horizontal position

Color

alignment

Mode

To set the color temperature to Personal,

Cool, Normal and Warm.

When you adjust the following settings,

Personal will be set automatically.

Cursor Cursor 

Red gain To decrease red

contrast

To increase red

contrast

Green gain To decrease green

contrast

To increase green

contrast

Blue gain To decrease blue

contrast

To increase blue

contrast

Red offset To decrease red

brightness

To increase red

brightness

Green offset To decrease green

brightness

To increase green

brightness

Blue offset To decrease blue

brightness

To increase blue

brightness

Custom color

management

To select the desired setting, then press OK

(Red, Yellow, Green, Cyan, Blue and Magenta)

Cursor Cursor 

Tint

To rotate only

selected color tint in

clockwise direction

To rotate only

selected color tint in

counterclockwise

direction

Saturation

To decrease color

with only selected

color

To increase color

with only selected

color

Brightness

To decrease

brightness with only

selected color

To increase

brightness with only

selected color

HDR mode

Off To set HDR mode to off

Auto

Automatically switches to a dedicated

picture quality setting when receiving HDR

signal

Gamma

To select the desired setting, then press OK

(Very Dark Room, Dark Room, Normal, Bright Room and

Very Bright Room)

Blue stretch To select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Film mode

Off To set film mode to off

Auto To optimize the picture recorded by the

original film

Note(s)

•Mode selection is available only if

–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.

–The connected HDMI device is outputting a video signal.

32 .English

Continued on next page.

Sound

B

Before you begin:

You must set Home in Location.  p. 35

Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Sound, then press OK.

Delta volume

Digital output format

Headphone volume

TV speakers

Auto volume leveling

Sonic Emotion Premium

Balance

Equalizer

Auto sound

Installation

Features

Sound

Picture

Chromecast Built-in TV settings

Accessibility

3Use  to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the format

of the broadcasting, some sound settings are not available.

Auto sound

To set your TV to a predefined sound setting.

When you adjust the following settings (Equalizer,

Sonic Emotion Premium and Auto volume leveling),

Personal sound will be set automatically.

Personal The customized settings you

defined using the Sound menu.

Standard For normal TV viewing.

Vivid Enhanced sound.

Sports Clear sound for high action.

Movie Powerful sound settings for a

cinematic experience.

Music Optimized for music playback.

News Set the anchor's voice at a

comfortable volume.

Adjust the tonal quality for each frequency.

Equalizer

Cursor Cursor 

To adjust each level of tonal quality

Press BACK to go back to the previous menu.

Adjust the speakers to suit your listening preference.

Balance Cursor Cursor 

To adjust the balance of the right and left speakers

This selects sound modes for more spatial or surround sound

reproduction.

Sonic

Emotion

Premium

Sonic

Emotion

Off To set Sonic Emotion to off

On To set Sonic Emotion to on

Dialog

Enhancement

Off To set Dialog Enhancement to off

On To set Dialog Enhancement to on

Bass

Enhancement

Off To set Bass Enhancement to off

On To set Bass Enhancement to on

Absolute 3D

Sound

Off To set Absolute 3D Sound to off

On To set Absolute 3D Sound to on

This function keeps a constant Loudness differential between the TV

commercials and the programs.

Auto volume

leveling

Off To remove the Auto volume

leveling

On

To reduce volume differences

between the TV commercials and

the programs

You can select the audio output from the unit’s speakers or not. If your

amplifier is HDMI link function compatible and connected by an HDMI

cable to this unit, some sound operations such as volume up can be

changed by using this unit’s remote control. Make sure Master EasyLink

is set to On.  p. 36

TV speakers

Off No output sound from the unit’s

speakers

On To output sound from the unit’s

speakers

Speakers

EasyLink

To control audio output from your

connected EasyLink compliant

devices with VOL + / – by using this

unit's remote control.

Adjust headphone volume.

Headphone

volume

Cursor Cursor 

To decrease or increase volume

You can set the digital audio output format from SPDIF/ARC.

Digital output

format

PCM To output PCM format

Bitstream

To output audio in its native format

as Bitstream to connected audio

receiver

If a channel or input device is too loud or too soft, navigate to that channel

or input device.

Delta volume

Cursor Cursor 

Provides the ability to set a custom volume level

for the current channel or input source.

If the source volume is too loud, set a negative

value (-1 to -12)

If the source volume is too soft, set a positive value

(+1 to +12)

33 .English

Continued on next page.

Chromecast Built-in TV settings

Displays Chromecast Built-in TV settings. If you set Wake on Cast (LAN)

to On, you can turn your TV on when you use your Smartphone, Tablet

or PC via your home network.

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Chromecast Built-in TV settings, then press OK.

Installation

Features

Sound

Picture

Wake on Cast (LAN)

Chromecast Built-in TV settings

Accessibility

3Use  to select Wake on Cast (LAN), then press OK.

4Use  to select On or Off, then press OK.

Wake on Cast (LAN)

Off To set Wake on Cast

(LAN) to off

On To set Wake on Cast

(LAN) to on

Features

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Features, then press OK.

Sleeptimer

Installation

Features

Sound

Picture

Accessibility

Chromecast Built-in TV settings

Standby mode

3Adjust the following items.

Sleeptimer

Sleep timer can set the unit to go into standby mode after an incremental

period of time.

1Use  to select Sleeptimer, then press OK.

2Use  repeatedly to change the amount of time

(increases the time by 5 minutes up to 180 minutes).

•Each press of  will decrease the time by 5 minutes.

•Press INFO once to call up the display for checking the remaining

time.

•To cancel the sleep timer, press  repeatedly until “0” is

displayed.

Standby mode

To set preferred standby mode.

1Use  to select Standby mode, then press OK.

Sleeptimer ECO standby

Active standby

Standby mode

ECO standby To set low energy consumption mode.

Active standby Enables TV to turn on fast but consumes more energy

during standby.

34 .English

Continued on next page.

Installation

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Installation, then press OK.

Installation

Features

Sound

Picture

Restore default settings

Preferences

Language

Chromecast Built-in TV settings

Accessibility

3Adjust the following items.

Language

You can set the language for the on-screen display.

1Use  to select Language, then press OK.

Installation

Features

Sound

Picture

Accessibility

Español

Français

English

Restore default settings

Preferences

Language

Chromecast Built-in TV settings

2Use  to select English, Español or Français, then press OK.

Note(s)

•If you need the English menu instead of the Spanish or French menu’s, press MENU.

Use  to select Ajustes de TV or Réglages de la télévision, then press OK.

Use  to select Instalación or Installation, then press OK.

Use  to select Idioma or Langue, then press OK.

Use  to select English, then press OK.

Press MENU to exit the Main menu.

Preferences

You can set the unit to reduce the power consumption or adjust the

backlight brightness in Location setting.

EasyLink allows you to operate your connected EasyLink device.

S

Setting your location to home

Choosing Home gives you full flexibility to change predefined settings for

picture and sound.

1Use  to select Preferences, then press OK.

2Use  to select Location, then press OK.

TV placement

Location

HDMI mode

Home

Retail

Restore default settings

Preferences

Language

EasyLink

Retail Demo

3Use  to select Home, then press OK.

Retail

The unit will be set up with predefined settings for

retail displays. In this setting, you can set the backlight

brighter.

Home

The unit is set to maximize the energy efficiency for

home setting and it can be adjusted through a choice

of picture and sound quality selections according to

your preference.

Note(s)

•You must set Home in the menu. Otherwise, personalized picture and sound settings will not

be memorized after the unit goes into standby mode.

HDMI mode

If there are issues with picture/color and/or sound when connecting an

external device using the HDMI port, please try switching the HDMI mode

following the instructions below.

1Press  and use  to select Setup, then press OK.

2Use  to select TV settings, then press OK.

3Use  to select Installation, then press OK.

4Use  to select Preferences, then press OK.

5Use  to select HDMI mode, then press OK.

6Use  to select HDMI1, HDMI2 or HDMI3, then press OK.

7Use  to select Max 4K@60Hz + HDR, Max 4K@60Hz or Max

4K@30Hz (Compatibility) depending on the output capabilities of

the external device, then press OK.

•When switching the HDMI configuration, the screen will black out

for a moment, then come back on.

Note(s)

•For HDMI 1 and HDMI3, Max 4K@30Hz (Compatibility) is the default setting, and for HDMI 2,

Max 4K@60Hz + HDR is the default setting.

•The HDMI connector with HDMI mode set to Max 4K@30Hz (Compatibility) supports up to

UHD 30P, while The HDMI connector with HDMI mode set to Max 4K@60Hz supports up to

UHD 60P. The HDMI connector with HDMI mode set to Max 4K@60Hz + HDR supports up to

UHD 60P with HDR signal.

•Switching the HDMI mode may cause loss of HDMI CEC functionality in certain cases.

35 .English

Continued on next page.

T

TV placement

To apply the best settings for your TV, select wall mount or stand mount.

1Use  to select Preferences, then press OK.

2Use  to select TV placement, then press OK.

3Use  to select Wall mounted or On a TV stand, then press OK.

Retail Demo

When you set Location to Retail, E-sticker (Electronic Sticker) is displayed.

E-sticker can be turned off using procedure below.

1Use  to select Preferences, then press OK.

2Use  to select Retail Demo, then press OK.

3Use  to select Off, then press OK.

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and

one-touch standby between EasyLink-compliant devices. Compliant

devices must be connected via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, you

can control your TV and the devices with one remote control. For

example, when you press (Play) on your DVD remote control, your TV

automatically switches to the correct channel to show the DVD content.

One-touch standby

When you connect your TV to devices that support standby, you can use

your TV remote control to put your TV and all connected HDMI devices

in standby mode. You can perform one-touch standby using the remote

control from any of the connected HDMI devices.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can

switch automatically to play audio from the connected device. To use

one-touch audio, you must map the audio input from the connected

device to your TV. You can use the remote control from the connected

device to adjust the volume.

Remote control (RC) key forwarding

RC key forwarding allows you to control EasyLink-compliant devices

using your TV remote control.

HDMI-ARC (Audio Return Channel) (HDMI 2 only)

HDMI-ARC allows you to use Philips EasyLink to output TV audio directly

to a connected audio device, without the need for an additional digital

audio cable. Be sure that the device is HDMI CEC and ARC compliant, and

that the TV is connected to the device using an HDMI cable attached to

both HDMI-ARC connectors.

Note(s)

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

•The EasyLink-compliant device must be switched on and selected as the source.

EasyLink (HDMI CEC)

This function allows you to operate the linked functions between our

brand devices with a EasyLink feature and this unit connecting through

an HDMI cable. You must connect this unit to our brand EasyLink devices

and be sure its EasyLink (HDMI CEC) setting is also set to on.

1Use  to select Preferences, then press OK.

2Use  to select EasyLink, then press OK.

3Use  to select the item you want to adjust, then press OK.

On

O

HDMI-ARC

RC key forwarding

Auto TV On

Master EasyLink

TV placement

EasyLink

Location

HDMI mode

Retail Demo

Set the Master EasyLink to On or Off. The following additional settings

will be grayed out when you set them to Off.

Master

EasyLink

Off Disables all EasyLink.

On

Selects if you have connected an

external device that is compatible with

the EasyLink function.

This unit will turn on when the power on signal is sent from your connected

EasyLink device.

Auto TV On

Off

This unit stays in Standby mode even

if you turn on your connected EasyLink

device.

On

This unit turns on automatically when

you turn on your connected EasyLink

device.

You can operate some functions such as disc playback or call up the

menu of the connected devices, by using this unit’s remote control.

RC key

forwarding

Off Disable RC key forwarding.

On

PLAY, PAUSE. / STOP. /

FWD/ / REV0 / VOL + / – / 

(MUTE) / OPTIONS /  / OK /

BACK / the NUMBER buttons can

be used to control your connected

EasyLink devices by this unit’s remote

control.

Note(s)

•Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)

compliant.

HDMI-ARC allows you to use Philips EasyLink to output TV audio directly

to a connected audio device, without the need for an additional digital

audio cable.

HDMI-ARC

(HDMI 2 only)

Off Disable HDMI-ARC.

On

You can output TV audio through the

HDMI cable solely, provided both the

TV and device are HDMI-ARC

compliant.

36 .English

Continued on next page.

Return your settings to default values

You can return settings to their default values.

1Use  to select Restore default settings, then press OK.

2Use  to select Reset AV settings or Reset all settings, then press

OK.

Reset AV settings

Return picture and sound settings to their default

values. The channel installation settings are not

affected.

Reset all settings Return all the settings to their default values.

Accessibility

1Press MENU and use  to select TV settings, then press OK.

2Use  to select Accessibility, then press OK.

Digital audio preferences

Caption settings

Installation

Features

Sound

Picture

Accessibility

Voice guide

Chromecast Built-in TV settings

3Adjust the following items.

Voice guide

Lets you configure voice guide and its settings.

1Use  to select Voice guide, then press OK.

Voice guide toggle Off To set Voice guide off

On To set Voice guide on

Speed

Fast Set voice guide speed based on

your preference

Normal

Slow

Pitch

High Set voice guide pitch based on

your preference

Normal

Low

Verbosity

Verbose Set voice guide explanation

verbosity based on your

preference

Succinct

Volume level

Loud Set voice guide volume based on

your preference

Normal

Soft

Caption settings

Closed captions displays the audio portion of the program as

superimposed text over the video.

1Use  to select Caption settings, then press OK.

CC w/ mute

On

O

Digital caption options

Digital caption service

Caption service

Closed captions

Digital audio preferences

Caption settings

Voice guide

Closed captions

Off Closed caption is not displayed.

On Closed caption is always displayed.

CC w/ mute Closed caption is displayed when

the sound is off.

Digital TV operation

In addition to the basic closed caption, DTV has its own closed caption

called digital caption service. Use this menu to change the settings for

digital caption service.

Digital caption

service CS-1 to CS-6

Select one of these before

changing any other item in Caption

settings menu. Choose CS-1 under

normal conditions.

You can choose the size, font, color, background and other characteristics

of the caption text.

Digital caption

options

Reset to

default

You can reset the status of digital

caption options.

You can change closed captioning font style, size,

color and transparency.

(Font style, Font size, Font color and Font

opacity)

You can change background color and

transparency of the displayed caption.

(Background color and Background opacity)

You can change edge color and type of the

displayed caption text.

(Edge color and Edge type)

So, you must be Philip. Hi!

So, you must be Philip. Hi!

I’m pleased to meet you.

I’m pleased to meet you.

So, you must be Philip. Hi!

I’m pleased to meet you.

(Background color and Background opacity)

Background

(Edge color and Edge type)

Text edge

(Font style, Font size, Font color and Font opacity)

Text font

Picture display

•Review your setting choice made above by looking in the upper left

corner of the displayed setting box (not all selections show the

differences selected).

37 .English

Continued on next page.

Cable / NTSC (Analog) TV operation

Caption service

CC-1 and T-1

The primary closed captions and

text services. The closed captions

or text is displayed in the same

language as the program’s dialog

(up to 4 lines of script on the TV

screen).

CC-3 and

T-3

Serve as the preferred data

channels. The closed captions or

text is often a secondary language.

CC-2, CC-4,

T-2 and T-4

Rarely available and broadcasters

use them only in special conditions,

such as when CC-1 and CC-3 or T-1

and T-3 are not available.

•There are 3 display modes according to programs:

Paint-on Displays characters on the TV screen immediately.

Pop-on Once characters are stored in memory, they are

displayed all at once.

Roll-up Displays the characters continuously by scrolling

(max. 4 lines).

Note(s)

•Digital caption service that you can switch differs depending on the broadcast description.

•Closed captioning service may not be controlled by this unit’s menu options if you are watching

television through an external cable or satellite set-top box. In which case you will need to use

the menu options on the external set-top box to control closed captioning.

•The captions do not always use correct spelling and grammar.

•Not all TV programs and product commercials include closed caption information. Refer to your

area TV program listings for the TV channels and times of closed caption shows. The captioned

programs are usually noted in the TV listings with service marks such as CC.

•Not all captioning services are used by a TV channel during the transmission of a closed caption

program.

•Closed caption will NOT be displayed when you are using an HDMI or a component

connection.

•To show the closed caption on your TV screen, broadcast signal must contain the closed caption

data.

•Not all TV programs and commercials have the closed caption or all types of the closed

caption.

•Caption's and text may not exactly match the TV voice.

•Changing channels may delay the closed caption for a few seconds.

•Adjusting or muting the volume may delay the closed caption for a few seconds.

•Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace

with the on-screen action. This is not a malfunction.

•The caption or text characters will not be displayed while the Main menu or functions display

is shown.

•If a black box appears on the TV screen, this means that the closed caption is set to the text

mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.

•If the unit receives poor quality television signals, the captions may contain errors or there might

be no captions at all. Some possible causes of poor quality signals are:

–Automobile ignition noise

–Electric motor noise

–Weak signal reception

–Multiplex signal reception (ghosts or screen flutter)

–Data dropout and pixelation (for DTV only)

•The unit retains the closed caption setting if the power fails.

•When the unit receives special effects playback signal (e.g. search, slow and still) from a VCR’s

video output channel (ch3 or ch4), the unit may not display the correct caption or text.

•The EUT setting that satisfies § 79.102 (e) is as follows:

–Font: Mono-font

–Character size: Large

Digital audio preferences

You can set the interpretive broadcasting by an audio explanation.

1Use  to select Digital audio preferences, then press OK.

Primary audio selection criteria

Audio language

Audio accessibility

Digital audio preferences

Caption settings

Voice guide

Audio accessibility

To prioritize VI-Visually Impaired streaming or HI-

Hearing Impaired streaming: The setting for

handicapped users (Main audio, Visually

Impaired or Hearing Impaired).

Audio language To set your preferred language in the audio

streaming (English, Spanish or French).

Primary audio

selection criteria

To set TV priority based on either of the above

settings: (Audio accessibility or Audio language).

Search for channels

Be sure the RF cable is correctly connected to this unit and you are

registered with your cable TV provider when you install cable channels.

1Press MENU and use  to select Search for channels, then

press OK.

2Use  to select Start, then press OK.

Install channels

You can search and store all channels. If you move the unit to a different

area after the initial setting, it is recommended to perform

Autoprogramming.

4Use  to select Antenna or Cable, then press OK.

5Press OK on Start.

•When the scanning and memorizing of available channels is

completed, the lowest memorized channel will be displayed.

6Follow the on-screen instructions to complete the installation.

0

0

12 34

Stop

Total progress:

Analog channels found:

Digital channels found:

complete.

more than 20 minutes to

Auto programming may take

wait...

System searching. Please

38 .English

Continued on next page.

Channel settings

1Press MENU and use  to select Channel settings, then press

OK.

2Adjust the following items.

Uninstall channels

Installation mode

Mono/Stereo

Digital audio language

Change PIN

Child lock

Channel installation

Channel installation

Be sure the RF cable is correctly connected to this unit and you are

registered with your cable TV provider when you install cable channels.

Installation mode

1Use  to select Channel installation, then press OK.

2Use  to select Installation mode, then press OK.

3Use  to select Antenna or Cable, then press OK.

•When Antenna is selected, the TV detects antenna signals. It

searches for DTV and analog TV channels available in your area.

•When Cable is selected, the TV detects signals supplied by cable.

It searches for DTV, analog TV and cable channels available in your

area.

Uninstall channels

The channels selected here can be skipped when selecting the channels

using CH + / –.

Those channels can still be selected with the NUMBER buttons.

1Use  to select Channel installation, then press OK.

2Use  to select Uninstall channels, then press OK.

3Use  to select the channel you want to remove, then press OK.

•The removed channels are not displayed on the list of favorite

channels.

•To reactivate a removed channel, use  then press OK.

Child lock

You can prevent your children from watching certain programs or certain

channels by locking the TV controls and by using ratings.

1Use  to select Child lock, then press OK.

Mono/Stereo

Digital audio language

Change PIN

Child lock

Channel installation

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

2Use the NUMBER buttons to enter the 4-digit numbers for your PIN

code.

•When you have not set up your PIN code, enter 0, 0, 0, 0.

•When the PIN code is correct, Child lock menu is displayed.

See the following description for setting each item.

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Mono/Stereo

Digital audio language

Change PIN

Child lock

Channel installation

Note(s)

•When you select the higher rating and set it to ,, the lower ratings will be blocked

automatically.

•To remove all blocks place a check in the All box and then remove that check to remove all

blocks.

•Region ratings lock will be available when the unit receives a digital broadcast using the new

rating system.

•To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings lock and

Region ratings lock.

•For the United States, the unit may download the region ratings lock table, if required.

•The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.

Setting TV and movie ratings

Movie ratings lock is the rating system created by MPAA. TV ratings lock

has controlled access to individual programs based on their age ratings

and content rating.

3Use  to select TV ratings lock or Movie ratings lock, then press

OK.

4Use  to select the desired rating, then press OK repeatedly to

switch between block and view.

•, indicates that the rating is locked (Blocked).

• indicates that the sub rating is locked (Blocked).

• indicates that the rating is not locked (Viewable).

39 .English

Continued on next page.

TV ratings lock

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Movie ratings lock

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

X

NC-17

R

PG-13

PG

G

NR

All

US movie

ratings

US TV

ratings Description

All All ratings locked including no rating

NR None No rating

–TV-Y Appropriate for all children

–TV-Y7 Appropriate for all children 7 and older

G TV-G General audience

PG TV-PG Parental guidance suggested

PG-13 – Unsuitable for children under 13

–TV-14 Unsuitable for children under 14

R–Restricted under 17 requires

accompanying parent or adult guardian

NC-17 – No one under 17 admitted

X TV-MA Mature audience only

To set the sub ratings (displayed in the right column)

For TV ratings lock, you can further set the sub ratings to block specific

elements of programming. To set the sub ratings, follow the step below.

Use  to select the desired rating, then press OK repeatedly to

switch between , and .

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Fantasy Violence

US TV ratings Sub rating

TV-Y7 Fantasy Violence

TV-PG Violence

Sex

Language

Dialog

TV-14

TV-MA

Violence

Sex

Language

Note(s)

•Blocked sub rating's will appear beside the main rating category in TV ratings lock menu.

•You cannot block a sub rating if the main rating is set to .

•Changing the category to , or  automatically changes all its sub ratings to the (, or ).

Canadian English or Canadian French ratings

You can select the rating for Canadian English or Canadian French

broadcasting.

3Use  to select Canadian English rating or Canadian French

rating, then press OK.

4Use  to select the desired rating, then press OK repeatedly to

switch between block and view.

•, indicates that the rating is locked (Blocked).

• indicates that the rating is not locked (Viewable).

Canadian

English

rating

Canadian

French rating Description

All Locked all ratings

EExempt program

C– For all children

C8+ – For all children 8 and older

GGeneral audience

–8 ans+ Unsuitable for ages under 8

PG – Parental guidance suggested

–13 ans+ Unsuitable for ages under 13

14+ – Unsuitable for ages under 14

–16 ans+ Unsuitable for ages under 16

18+ 18 ans+ Adult audience only

Note(s)

•The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to block

NR, None or E programs are used in Movie ratings lock, TV ratings lock, Canadian English

rating or Canadian French rating accordingly “unusual results may occur and the unit may not

receive emergency bulletins or other types of programming”: / Emergency bulletins (Such as

EAS messages, weather warnings and others) / Locally originated programming / News /

Political / Public service announcements / Religious / Sports / Weather.

40 .English

Continued on next page.

Change PIN

Although the default PIN code (0000) is supplied with the unit, you can

set your own PIN code.

1Use  to select Change PIN, then press OK.

2Press the NUMBER buttons to enter the current 4-digit PIN code.

3Press the NUMBER buttons to enter the new 4-digit PIN code.

•Enter PIN code again to confirm.

Note(s)

•Make sure new PIN code and confirm PIN code must be exactly the same. If they are different,

the space is cleared for reentering.

•If you have forgotten your PIN code, enter 07 1 1 to reset the PIN code.

Digital audio language

You can select the audio language while your TV is receiving the digital

broadcasting.

1Use  to select Digital audio language, then press OK.

Digital audio

language

To select the language according to your

preference.

(It differs depending on the program.)

Mono/Stereo

Cable / NTSC (Analog) TV operation

You can select an audio format while your TV is receiving the analog

broadcasting.

1Use  to select Mono/Stereo, then press OK.

2Use  to select Mono, Stereo or SAP (Second Audio Program),

then press OK.

Update software

Philips continuously tries to improve its products and we strongly

recommend that you upgrade the TV software when upgrades are

available.

New software can be downloaded from our website at

www.philips.com/support using the model number of your TV to find

information.

You can update the software through these methods:

•Update with USB memory stick

This section describes how to upgrade the software by using USB memory

stick.

Preparing for the software upgrade

You require the following equipment:

–A PC with web browsing capability

–An archive utility that supports the ZIP-format

(e.g. WinZip for Windows or StuffIt for Mac OS)

–An empty clean formatted USB memory stick

Note(s)

•Only FAT / DOS-formatted portable memory is supported.

•Use only software upgrades that can be found on the Philips web site.

Warning

•When the software upgrade is running, don’t press any buttons.

•Do not remove the USB memory stick during the software upgrade.

•If an error occurs during the upgrade, retry the procedure or for further assistance, please contact

call center.

Downloading the software

Find information and software related to your TV and download the latest

software upgrade file to your PC.

Prepare a blank USB memory stick for software update. Access

www.philips.com/support and download the latest version software to

a blank USB memory stick using a PC by following the directions described

on the website.

•Use a blank USB memory stick, download the software on your PC and

write the software in the root directory of the USB memory stick.

•For more details on how to download the software, please refer to the

website.

41 .English

Continued on next page.

USB upgrade

You can upgrade the software by using USB memory stick.

1Connect your USB memory stick with the upgrade file to the USB

terminal on the side of your TV.

2Press MENU and use  to select Update software, then press

OK.

3Use  to select USB, then press OK.

4Use  to select the desired update file, then press OK.

5Use  to select Yes, then press OK.

•Read the on-screen instructions and confirm that you want to

continue with the installation.

Do not remove the USB storage device or turn the TV o

while upgrade is in progress.

Software update is in progress. Please wait.

6When the software upgrade is completed, press  to set the unit into

standby mode, then remove the USB memory stick.

7Unplug the AC power cord for a few seconds from AC outlet and plug

it again.

8Press  again to turn the unit on.

•The TV starts up with the new software.

•For further assistance, please contact call center.

Network updates

You can update the software by connecting the unit to the internet.

1Press MENU and use  to select Update software, then press

OK.

2Use  to select Network, then press OK.

3Use  to select Yes, then press OK.

•This unit will then start checking for the latest FirmWare (software)

version.

4Confirmation message will appear.

Use  to select Yes, then press OK.

•The unit will start downloading the latest FirmWare (software)

version.

•The unit will start updating the FirmWare (software) version.

•It may take a while to complete the updating.

5When the software update is complete, press  to make sure the unit

goes to standby mode.

6Unplug the AC power cord for a few seconds from AC outlet and plug

it again.

7Press  again to turn the unit on.

•The TV starts up with the new software.

For further assistance, please contact call center.

Note(s)

•Please do not unplug the AC power cord or Ethernet cable while executing the Network

updates.

•All settings will remain the same even if you update the software version.

•The version of net service will also be updated if newer version of net service is available when

updating the firmware.

•When you start up the TV or a net service after executing the software update, a message may

appear on the screen prompting for software update again. In this case, please select Update

to start USB update or network update. For further assistance, please contact call center.

42 .English

Continued on next page.

Software settings

Software

1Press MENU and use  to select Software settings, then press

OK.

2Use  to select Software, then press OK.

Checking your current software version number

1Use  to select Software information, then press OK.

•The version and a description of the current software is displayed.

Checking your current Cast software version number

1Use  to select Cast software version, then press OK.

•The Cast software version is displayed.

Netflix ESN

Displays the ESN information.

1Use  to select Netflix ESN, then press OK.

•Displays the ESN (Electronic Serial Number) to get any services

from Netflix.

License

Displays the licenses of open source software used in this unit.

1Use  to select License, then press OK.

•Licenses of open source software used in this unit are displayed.

Digital rights management

This product contains technology subject to certain intellectual property

rights of Microsoft. Use or distribution of this technology outside of this

product is prohibited without the appropriate license(s) from Microsoft.

1Use  to select Digital rights management, then press OK.

•Digital rights management is displayed.

43 .English

5 Useful tips

FAQ

Question Answer

My remote control does not

work.

What should I do?

•Check the antenna or cable connection to the main unit.

•Check the batteries on the remote control.

•Check if there is an obstacle between the infrared sensor window and the remote control.

•Test the IR signal output use IR signal check.  p. 47

If okay, then possible infrared sensor trouble.

•Aim the remote control directly at the infrared sensor window on the front of the unit.

•Reduce the distance to the unit.

•Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control battery area.

•When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal on this unit.

Move the infrared-equipped device away from this unit, change the angle of the device's infrared sensor or turn off the

infrared communication function.

How come the initial setup

appears every time I turn on

this unit?

•Make sure to complete the initial setup before the unit goes into standby mode.

Why can I not watch some RF

signal TV programs?

•Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously

unavailable channels are broadcast.

•Make sure auto programming has been completed.  p. 38

•The selected channel may not be broadcasting.

•When Auto programming is interrupted and not completed, some channels will not be received. Make sure to complete

the Autoprogram.  p. 38

•The selected channel cannot be viewed by the Child lock setting.  p. 39

•The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or

VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to be plugged into the unit.

How come there is no image

from the connected external

devices?

•Check if the correct input mode is selected by pressing SOURCE.  p. 24

•Check the antenna, cable or other input connection to the unit.

•When using the component video connection check that the green (Y), blue (Pb/Cb) and red (Pr/Cr) connectors are

connected to their corresponding colored jacks on the unit.

When I enter a channel

number, why does it change

automatically?

•Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying

the broadcasting station's channel number. These basic numbers used for the previous analog broadcasts. (e.g., input

digital ch# 30 automatically changes to digital ch# 8.1)

Why are captions not

displayed entirely?

Or why are captions delayed

behind the dialog?

•Closed captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning

production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective

editing is used to insure that the closed captions remain up-to date with the current TV screen dialog.

How can I set the clock? •There is no clock function on this unit.

My PIN code no longer

works, how can I change the

child lock setting?

•Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in

Child lock.  p. 39

When you forget your PIN code, enter 07 1 1 in Change PIN to reset the PIN code.  p. 41

When I start up the TV or a

net service, a message

appears on the screen

prompting for software

update again.

•When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting

for software update again. In this case, please select Update to start USB update or network update.  p. 41

44 .English

Continued on next page.

Troubleshooting tips

If the unit does not perform properly when operated as instructed in this manual,

P

Please check the following Troubleshooting tips and all connections once before calling for service.

Power

No power

•Make sure the AC power cord is plugged in.

•Make sure that the AC outlet supplies the proper voltage, plug another electrical

appliance into the AC outlet to ensure that the AC outlet operates normally.

•If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit

to reset itself.

Remote

Control buttons do not work.

•Do NOT press more than one button at the same time.

•Ensure that no buttons on the remote control are depressed and move freely.

Universal remote control does not work properly.

•Refer to the User manual of the universal remote control for the Philips code.

Picture

Power is on but no screen image.

•Check whether the connection for the antenna, cable or set-top box is

connected correctly.

•Check whether all the cables to the unit are connected to the correct output jack on

your separate device like Blu-ray disc / DVD recorder.

•Make sure that the selected input mode is connected to the working input jack.

•Check if your computer is NOT in sleep mode when the input mode on this unit

is in PC mode. Tap any key on the computer keyboard to wake it up.

•Check if the correct input mode is selected by pressing SOURCE.

No color

•View other TV channels. The problem might be limited to the broadcasting

station.

•Adjust Color in Picture settings.  p. 31

Picture poor

•Adjust Contrast and Brightness in Picture settings.  p. 31

•For the best picture quality, watch “High Definition” wide screen programs. If the

HD content is not available, watch “Standard Definition” programs instead.

You see pixelation on the screen.

•When the capabilities of the unit exceed the capabilities of the digital

broadcasting, the signal will be increased to match the capabilities of the display

on the unit. This may cause pixelation, noise or trash.

Unusual picture appears and the TV does not operate.

•Press the power button first. If it does not solve, follow the procedure below.



Press the buttons on the remote control in the order shown below.



























Unplug the AC power cord, then wait for 1 minute, and then plug it in again.

Sound

No sound is heard when using the HDMI digital connection.

•Some HDMI cables and devices may not be compatible with the TV due to

different HDMI specifications.

No sound, distorted sound or incorrect audio sound is heard when using the

HDMI-DVI connections.

•Make sure that the analog audio signals from the HDMI-DVI device are

connected to the analog audio input L/R jacks.

•When using Component analog video or Composite analog video, make sure

that the analog audio (L/R) connectors are mounted into the audio (L/R) input

jacks.

Sound intermittent or no sound.

•Check if the audio cable is connected into the unit correctly.

You switch to a different input and the volume changes.

•This unit will memorize the volume level from the last time you adjusted it.

•If the volume of the sound from another device is higher or lower, then the

loudness will change.

•Make sure Auto volume leveling is set to On.  p. 33

Picture & Sound

No sound with distorted picture occurs when using the HDMI digital connection.

•Some HDMI cables and devices may not be compatible with the TV due to

different HDMI specifications.

No picture or sound

•Check if the power is on.

•Check whether all the cables to the unit are connected to the correct output jack on

your separate device like Blu-ray disc / DVD recorder.

•View other TV channels. The problem might be limited to the broadcasting station

or weak signal strength.

•Unplug the AC power cord and wait for about 1 minute, then plug the AC power

cord and turn on the unit again.

•Check whether the connection of the antenna or cable / satellite set-top box is

connected correctly.

•Make sure that the selected input mode is connected to the working input jack.

•Check if your computer is NOT in sleep mode when the input mode of this unit

is in PC mode. Tap any key on the keyboard to wake up your computer.

•Make sure that the sound is not muted. Press  so that the volume bar and

current volume level will appear on the TV screen.

•Make sure that the volume is NOT set to 0 or . If so, use VOL + / – to adjust to

the desired volume.

•Make sure that the headphone is NOT connected to the headphone audio

output jack.

•Make sure that the TV speakers is NOT set to Off.

•If there are issues with picture/color and/or sound when connecting an external

device using the HDMI port, please try switching the HDMI mode. (Refer to HDMI

mode  p. 35)

Adjusted Picture or Sound settings are not effective every time the unit is turned

on.

•You must set Home in Location.  p. 35 (Otherwise, the settings you adjusted

will not be memorized after the unit goes into standby mode.)

You see a distorted picture or hear an unusual sound. (Analog TV - NTSC

signal)

•You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from

electrical appliances, automobiles, motorcycles or fluorescent lights.

•Try moving the unit to another location to see if this is the cause of the problem.

Ghosts, lines or streaks in picture.

•Electrical interference from nearby appliances may affect picture quality.

•View other TV channels. The problem might be limited to the broadcasting station

or weak signal strength.

Picture poor, sound intermittent or no sound

•View other TV channels. The problem might be limited to the broadcasting station

or weak signal strength.

Child and rating lock

Forgotten PIN code.

•Enter “07 1 1” to clear your password.

Screen

You switch to a different input and the screen size changes.

•This unit will memorize the viewing mode from the last time you used the

particular input modes.

The display image does not cover the entire screen.

•If you are using the unit as a PC monitor, make sure that Horizontal position and

Vertical position in Picture are set correctly.  p. 31

•If you are watching TV or using the Composite video, Component video or HDMI

with 480i input, press FORMAT repeatedly to switch to various screen

modes.

Different color marks on the TV screen

•View other TV channels. The problem might be limited to the broadcasting

station, missing data or pixelation due to weak signal strength.

45 .English

Continued on next page.

Closed captions

Closed captions are displayed as a white box. No closed captions are displayed

in the closed captions-supported program.

•Interference from buildings or weather conditions may cause closed captions to

be incomplete if watching analog TV signals.

•Broadcasting station may shorten the program to insert advertisements.

The closed caption decoder cannot read the information of the shortened

program.

Black box is displayed on the TV screen.

•The text mode is selected for caption. Select CC-1, CC-2, CC-3 or CC-4.

Software update

A message appears on the screen prompting for software update again.

•When you start up the TV or a net service after executing the software update, a

message may appear on the screen prompting for software update again. In this

case, please select Update to start USB update or network update.  p. 41

Network

Cannot connect to the network.

•Check if the Ethernet cable connection is properly made. Turn on the broadband

router and/or modem.

•Check the network settings.

•Check if the broadband router and/or modem is correctly connected.

Sometimes video quality is poor when using the wireless LAN.

•The wireless network connection quality varies depending on the distance or

obstacles (e.g. wall, basement, 2nd floor) between the TV wireless LAN adapter

and the wireless router (access point), from other wireless networks, and brand

and type of the wireless router (access point). When using the wireless LAN of

the TV, it is suggested to place the wireless router as close as possible to the

television.

Wireless LAN connection fails or wireless connection is poor.

•Check the installation location of the TV and wireless router (access point). Signal

quality may be affected for the following reasons.

–Interference of other wireless devices, microwaves, fluorescent lights, etc., are

placed nearby.

–There are floors or walls between the wireless router and TV.

–If the problems continue even after checking the above, try making a wired

LAN connection.

Cannot use the wireless connection.

•Check if the wireless LAN Access Point (AP) (e.g. wireless router) is oriented

properly or not placed too close between them.

•Once you have activated the wireless connection please wait 30 seconds for the

connection to be established after turning on the unit, before trying to access

network features such as Net TV.

Note(s)

•The LCD screen is manufactured to provide many years of useful life.

Occasionally a few non active pixels may appear as a fixed point of blue, green

or red.

This is not to be considered a defect in the LCD screen.

•Some functions are not available in specific modes, but this is not a malfunction.

Read the description in this manual for more details on correct operations.

For additional troubleshooting, refer to the Frequently Asked Questions

or FAQs on www.philips.com/support.

46 .English

6 Information

Glossary

Analog TV (NTSC)

Acronym that stands for National Television Systems Committee and the

name of analog broadcasting standards.

Off the air analog TV signals are no longer being sent by major broadcasting

stations in the USA.

ARC (Audio Return Channel) (HDMI 2 only)

HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to

a connected audio device, without the need for an additional digital audio

cable. Be sure that the device is HDMI CEC and ARC compliant, and that the

TV is connected to the device using an HDMI cable attached to both HDMI-

ARC connectors.

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in

other words, the TV screen is almost square); widescreen models are 16:9 (the

TV screen is almost twice as wide as its height).

CEC (Consumer Electronics Control)

This allows you to operate the linked functions between our brand devices

with CEC feature and this unit. We do not guarantee 100% interoperability with

other brands of CEC compliant devices.

Component video

This is a Video signal format that conveys each of 3 principal colors of light

(red, blue and green) through different signal lines. This allows the viewers to

experience picture colors as original as it is. There are several signal formats,

including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital sound. It

offers stereo sound (2ch) or multi-channel audio.

DTV (ATSC)

Abbreviation that stands for Advanced Television Systems Committee and

the name of the digital broadcasting standards.

E-sticker

E-sticker is showing set features, technical information, etc on this TV set that

is displayed on the TV screen mainly used by TV retailers. Previously the

information was on a printed sticker that was put on the display.

HDMI (High-Definition Multimedia Interface)

Interface that supports all uncompressed, digital audio / video formats

including set-top box, Blu-ray / DVD recorder or digital television, over a single

cable.

HDR

HDR stands for High Dynamic Range. By using additional data encoded with

the source signal, HDR capable products offer greater contrast through an

expansion of the range of the image’s color luminance. The source, cable and

display must all support HDR.

HDTV (High-Definition TV)

Ultimate digital format that produces high resolution and high picture quality.

PIN code

A stored 4-digit number that allows access to parental control features.

SAP (Secondary Audio Program)

Second-audio channel delivered separately from the Main-audio channel.

This audio channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)

Standard digital format that is similar to the analog TV picture quality.

Sonic Emotion Premium

Sonic Emotion Premium fills your surroundings with the right ambience,

clarifies voice, and details the sound stage, making your experience more

immersive and enjoyable.

Maintenance

Cleaning

•Clean the front panel and other exterior surfaces of the unit with a soft

microfiber cloth or lens brush. Before cleaning the panel, disconnect the

AC power cord.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the

unit. Such chemicals may cause damage and discoloration to the

exposed surfaces.

•Do not spray any liquids on the screen or other exterior surfaces of this

unit. If liquids enter the unit, they could cause shorts, electric shocks or

fire damage.

Servicing

Should your unit become inoperative, do not try to correct the problem

yourself. There are no user serviceable parts inside. Call our toll free

customer support line found on the cover of this User manual to locate

an authorized service center.

IR signal check

If the remote control is not working properly, you can use a digital or cell

phone camera to see if it is sending out an infrared signal.

e.g.) With a digital camera:

Point the digital camera towards the remote

control infrared diode at the front of the

remote control. Press and hold any key on

the remote control and look at the camera

display. If an infrared pulsating light appears

on the display, the remote control is sending

out an IR signal.

Note: Some cameras may have an IR filter

or dual camera cell phones may have an IR filter in one of the camera's

and both will not display the IR signal.

47 .English

7 Specifications

178° (V) by 178° (H)

ATSC (digital) / NTSC (analog)

Mono, Stereo, Sonic Emotion Premium

5 Band

Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen

Automatic / 4:3 / Wide screen / Full / Unscaled

Full / Unscaled

JPEG, Progressive JPEG

MP3, WAV, AAC

MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC

: VHF: 2∼13

: VHF: 2∼13

UHF: 14∼69

2∼13, A∼W

W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A

1

1

1

Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz)

1

1

Supporting Dolby Audio (Dolby Digital and Dolby Digital Plus)

1

1/8 inch (3.5mm)

120V∼ +/- 10%, 60Hz +/- 0.5%

41 °F (5 °C) to 104 °F (40 °C)

UHD (Ultra HD) (3840 x 2160 pixels 60Hz)

Over-the-Air DTV

(ATSC)

Over-the-Air Analog

(NTSC)

65”/ 16:9

65PFL5922 55PFL5922 50PFL5922 43PFL5922

54.6”/ 16:9 49.5”/ 16:9 43”/ 16:9

10W x 2 8W x 2

Model #

Picture

Type

Diagonal screen size / Aspect ratio

Viewing angles

Built-in digital / analog tuner

Sound

Mono / Stereo

Power output (RMS watts)

Equalizer

Ease of use

Picture format HD

UHD

Photo slide show

Music playback

Video playback

Channel

Channel coverage

CATV (Analog NTSC)

Tuning system

Channel access

Connectivity

Component video input

(Y/Pb/Pr)

Composite video input

(Shared Y green terminal

with component video)

HDMI input

Analog audio L/R input

PC input

USB

Wireless LAN

Ethernet port

Digital audio output

Headphone output

Power

Power requirements

Temperature

Operating temperature

UHF: 14∼69 (Each channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc)

Channel frequency synthesized tuning system

Supporting video signals : 480i/p, 720p, 1080i/p @60Hz

Supporting HDMI video signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz

Supporting PC-input video signal up to 4096 x 2160

1 (L audio / R audio)

Via HDMI and HDMI-DVI + Analog audio L/R

Supporting HDMI digital audio signals : LPCM, AC3, DD+

Direct access number keyboard, Programmable scan, Channel +(up) / -(down) and

PREV. CH (Previous channel)

SD (4:3 source)

(16:9 source)

3 (selectable HDMI modes)

•Specifications are subject to change without prior notice.

48 .English

8 Warranty

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248

LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth

below.

WHO IS COVERED:

This product warranty is issued to the original purchaser or

the person receiving the product as a gift against defects in

materials and workmanship as based on the date of original

purchase (“Warranty Period”) from an Authorized Dealer. The

original sales receipt showing the product name and the

purchase date from an authorized retailer is considered such

proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or

workmanship occurs and a valid claim is received within the

Warranty Period. At its option, the company will either (1)

repair the product at no charge, using new or refurbished

replacement parts, or (2) exchange the product with a

product that is new or which has been manufactured from

new, or serviceable used parts and is at least functionally

equivalent or most comparable to the original product in

current inventory, or (3) refund the original purchase price of

the product.

Replacement products or parts provided under this warranty

are covered against defects in materials and workmanship

from the date of the replacement or repair for ninety (90)

days or for the remaining portion of the original product’s

warranty, whichever provides longer coverage for you. When

a product or part is exchanged, any replacement item

becomes your property and the replaced item becomes

company property. When a refund is given, your product

becomes company property.

Note: Any product sold and identied as refurbished or

renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements can

result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to new company

manufactured products that can be identied by the

trademark, trade name, or logo axed to it. This Limited

Warranty does not apply to any hardware product or any

software, even if packaged or sold with the product, as

manufacturers, suppliers, or publishers may provide a

separate warranty for their own products packaged with the

bundled product.

The company is not liable for any damage to or loss of any

programs, data, or other information stored on any media

contained within the product, or other additional product or

part not covered by this warranty. Recovery or reinstallation

of programs, data or other information is not covered under

this Limited Warranty.

This warranty does not apply (a) to damage caused by

accident, abuse, misuse, neglect, misapplication, or

non-supplied product, (b) to damage caused by service

performed by anyone other than company approved

Authorized Service Location, (c) to a product or a part that

has been modied without written company permission, or

(d) if any serial number has been removed or defaced, or (e)

product, accessories or consumables sold “AS IS” without

warranty of any kind by including refurbished product sold

“AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product.

• Labor charges for installation or setup of the product,

adjustment of customer controls on the product, and

installation or repair of antenna/signal source systems

outside of the product.

• Product repair and/or part replacement because of

improper installation or maintenance, connections to

improper voltage supply, power line surge, lightning

damage, retained images or screen markings resulting

from viewing xed stationary content for extended

periods, product cosmetic appearance items due to

normal wear and tear, unauthorized repair or other cause

not within the control of the company.

• Damage or claims for products not being available for use,

or for lost data or lost software.

• Damage from mishandled shipments or transit accidents

when returning product.

• A product that requires modication or adaptation to

enable it to operate in any country other than the country

for which it was designed, manufactured, approved and/or

authorized, or repair of products damaged by these

modications.

• A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Product lost in shipment and no signature verication

receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE…

Contact the Customer Care Center at:

1-866-202-5960

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE

CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON

THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO

THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of

incidental or consequential damages, or allow limitations on

how long an implied warranty lasts, so the above limitations

or exclusions may not apply to you.

49 .English

License

P&F USA, Inc. hereby offers to deliver, upon request, a copy of the

complete corresponding source code for the copyrighted open source

code packages, on an “AS IS” basis, used in this product for which such

offer is requested by the respective licenses. This offer is valid up to three

years after the product purchase to anyone in receipt of this information.

To obtain source code, please contact P&F USA, Inc. You should write to

“Open Source Team, P&F USA, Inc., PO Box 2248, Alpharetta, GA

30023-2248. P&F USA, Inc. disclaims any and all warranties and

representations with respect to such software and related source code

including quality, reliability, usability, and accuracy, and further disclaim

all express, implied, statutory or otherwise, including without limitation,

any implied warranties of title, non-infringement, merchantability, or

fitness for a particular purpose. P&F USA, Inc. shall not be liable to make

any corrections to the open source software or source code or to provide

any support or assistance with respect to it. P&F USA, Inc. disclaims any

and all liability arising out of or in connection with the use of this software

and/or source code.

50 .English

This product has been manufactured by and is sold

under the responsibility of P&F USA, Inc., and P&F

USA, Inc. is the warrantor in relation to this product.

The Philips trademark and the Philips Shield Emblem

are registered trademarks of Koninklijke Philips N.V.

used under license.

P&F USA, Inc.

PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.

P&F Mexicana, S.A. de C.V.

Av. La Palma No. 6, Col. San Fernando La Herradura.

Huixquilucan, Edo. de México. C.P. 52787

AA78ZUH-65UL / AA7RZUH-55UL / AA7UZUH-50UX / AA7VZUT-43UL

䖩䖩䖩䖩䖩