Philips 52PFL9703 42PFL9803 Tv User Guide Manual Operating Instructions Pdf To The D7038493 5d74 4ef1 B49f 0b78d7b25712

User Manual: Philips 52PFL9703 to the manual

Open the PDF directly: View PDF .
Page Count: 68

EN LCD television

________________________________

DE LCD-Fernsehgerät

________________________________

FR Téléviseur LCD

________________________________

NL LCD televisie

________________________________

IT Televisore LCD

________________________________

ES Televisor LCD

________________________________

PT Televisor LCD

________________________________

EL TËÏÂfiÚ·Û˘ LCD

________________________________

Register your product and get support at

www.philips.com/welcome

32PFL9603

37PFL9603

42PFL9603

42PFL9703

42PFL9803

47PFL9603

47PFL9703

52PFL9703

cover 2705.3 16-05-2008 10:49 Pagina 1

32PFL9613

Downloaded From TV-Manual.com Manuals

cover 2705.3 16-05-2008 10:49 Pagina 2

Downloaded From TV-Manual.com Manuals

Table of contents

1Important 3

1.1 Safety 3

1.2 Care of the screen 3

1.3 Recycling 3

2Your TV 4

2.1 Television overview 4

2.2 Product highlights 5

3Getting started 5

3.1 Position the TV 5

3.2 Wall mounting - VESA 6

3.3 Remote control batteries 7

3.4 Antenna cable 7

3.5 Power cable 7

3.6 First time installation 7

4Use your TV 8

4.1 Switch on or off - Standby 8

4.2 Watch TV 9

4.3 Watch channels from a digital receiver 9

4.4 Watch connected devices 9

4.5 Watch a DVD 10

4.6 Select a Teletext page 10

4.7 Change Ambilight mode 11

5Use more of your TV 12

5.1 Remote Control 12

5.2 LightGuide brightness 15

5.3 TV menus 15

5.4 Picture and sound settings 16

5.5 Ambilight 19

5.6 Teletext 20

5.7 Create favourite channel lists 21

5.8 Electronic Programme Guide 22

5.9 Timers and locks 24

5.10 Subtitles 25

5.11 Watch and play photos, MP3... 25

5.12 Listen to digital radio channels 27

5.13 Software update 28

6Channel installation 30

6.1 Automatic channel installation 30

6.2 Manual channel installation 31

6.3 Rearrange stored channels 32

6.4 Channel management 32

6.5 Digital reception test 33

6.6 Factory settings 33

7Connections (DVD, receiver, ...) 34

7.1Connections overview 34

7.2 About connections 35

7.3 Connect your devices with the

Connection assistant 36

7.4 Connect your devices without the

Connection assistant 36

7.5 Connection setup 42

7.6 Preparing for digital services 43

7.7 PC network 44

8Technical data 50

9Troubleshooting 52

10 Index 54

UK Digital TV switchover info 56

Remote control setup codes at the end of this

book.

Register your product and get support at

www.philips.com/welcome.

Table of contents 1

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 1

Downloaded From TV-Manual.com Manuals

2008 © Koninklijke Philips Electronics

N.V. All rights reserved. Specifications

are subject to change without notice.

Trademarks are the property of

Koninklijke Philips Electronics N.V. or

their respective owners.

Philips reserves the right to change

products at any time without being

obliged to adjust earlier supplies

accordingly.

The material in this manual is believed

adequate for the intended use of the

system. If the product, or its individual

modules or procedures, are used for

purposes other than those specified

herein, confirmation of their validity

and suitability must be obtained. Philips

warrants that the material itself does

not infringe any United States patents.

No further warranty is expressed or

implied.

Warranty

No components are user-serviceable.

Do not open or remove covers and

do not insert objects in the ventilation

slots or insert objects not suitable for

the specific connectors. Repairs may

only be done by Philips Service

Centres and official repairshops. Failure

to do so shall void any warranty, stated

or implied.

Any operation expressly prohibited in

this manual, any adjustments, or

assembly procedures not

recommended or authorised in this

manual shall void the warranty.

Pixel characteristics

This LCD product has a high number

of colour pixels. Although it has

effective pixels of 99,999% or more,

black dots or bright points of light

(red, green or blue) may appear

constantly on the screen.This is a

structural property of the display

(within common industry standards)

and is not a malfunction.

Open source software

This television contains open source

software. Philips hereby offers to

deliver or make available, upon

request, for a charge no more than the

cost of physically performing source

distribution, a complete machine-

readable copy of the corresponding

source code on a medium customarily

used for software interchange.

This offer is valid for a period of 3

years after the date of purchase of this

product.

To obtain the source code, write to

Philips Innovative Applications N.V.

Ass. to the Development Manager

Pathoekeweg 11

B-8000 Brugge

Belgium

Compliance with EMF

Koninklijke Philips Electronics N.V.

manufactures and sells many products

targeted at consumers, which, like any

electronic apparatus, in general have

the ability to emit and receive

electromagnetic signals.

One of Philips’ leading Business

Principles is to take all necessary

health and safety measures for our

products, to comply with all applicable

legal requirements and to stay well

within the EMF standards applicable at

the time of producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health effects.

Philips confirms that if its products are

handled properly for their intended

use, they are safe to use according to

scientific evidence available today.

Philips plays an active role in the

development of international EMF and

safety standards, enabling Philips to

anticipate further developments in

standardisation for early integration in

its products.

Mains fuse (UK only)

This TV is fitted with an approved

moulded plug. Should it become

necessary to replace the mains fuse,

this must be replaced with a fuse of

the same value as indicated on the

plug (example 10A).

1. Remove fuse cover and fuse.

2. The replacement fuse must comply

with BS 1362 and have the ASTA

approval mark. If the fuse is lost,

contact your dealer in order to

verify the correct type.

3. Refit the fuse cover.

In order to maintain conformity to the

EMC directive, the mains plug on this

product must not be detached from

the mains cord.

Copyrights

VESA, FDMI and the VESA

Mounting Compliant logo are

trademarks of the Video Electronics

Standards Association.

Manufactured under license

from Dolby Laboratories.‘Dolby’,‘Pro

Logic’ and the double D symbol G,

are trademarks of Dolby Laboratories.

Manufactured under

license from BBE Sound, Inc. Licensed

by BBE, Inc under one or more of the

following US patents: 5510752,

5736897. BBE and BBE symbol are

registered trademarks of BBE Sound

Inc.

Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States

and/or other countries

® Kensington and MicroSaver are

registered US trademarks of ACCO

World Corporation with issued

registrations and pending applications

in other countries throughout the

world.

DLNA®,the DLNA

logo and DNLA Certified™ are

trademarks, service marks, or

certification marks of the Digital Living

Network Alliance.

All other registered and unregistered

trademarks are the property of their

respective owners.

2

2705.3 EN 20-05-2008 10:03 Pagina 2

Downloaded From TV-Manual.com Manuals

ENGLISH

Important 3

1Important

Read this user manual before you start to use this

product.

Pay attention to this section and closely follow the

instructions.The warranty does not apply to

damage caused by not taking into account the

instructions.

1.1 Safety

•To avoid short circuit, do not expose the product

to rain or water.

•To avoid a risk of fire or electric shock do not

place naked flame sources (e.g. lighted candles)

close to the TV.

•Leave a space of at least 10cm (4 inches) all

around the TV for ventilation.

•Keep away from radiators or other heat sources.

•Do not install the TV in a confined space such as

a book case. Make sure that curtains, cupboards

and so on cannot obstruct the air flow through

the ventilation slots.

•To prevent damage, do not insert any object into

the ventilation slots.

•Make sure the TV cannot fall down. Place the TV

on a solid and flat surface and only use the stand

provided with the TV.

•To prevent damaging the mains cord, do not

place the TV, or anything else, on the cord.

Damage the cord may cause a fire or electric

shock.

•When mounted on a swivel stand or VESA wall

bracket avoid force coming on the mains plugs.

Mains plugs that are partly loosened can cause

arcing or fire.

1.2 Care of the screen

•Unplug the TV before cleaning.

•Clean the surface with a soft damp cloth. Do not

apply any other substance (chemical or

household cleaning agent).This may damage the

screen.

•Do not touch, push or rub or strike the screen

with anything hard as this may scratch, mar or

damage the screen permanently.

•To avoid deformations and colour fading, wipe off

water drops as soon as possible.

•Stationary images

Avoid stationary images as much as possible. If

you cannot, reduce screen contrast and

brightness to prevent damage to the screen.

Stationary images are images that remain on the

screen for a long time. Examples of stationary

images are: on screen menus, teletext pages, black

bars, stock market information,TV channel logos,

time displays, and so on.

1.3 Recycling

•Take the packaging to your local recycling centre.

•Dispose old batteries safely according local

regulations.

•This product is designed and manufactured for

material recycling and re-use.

•Do not dispose this product with other

household waste. Inform yourself or ask your

dealer about local environmentally safe recycling

and local regulations. Uncontrolled waste disposal

harms the environment and human health.

(EEC 2002/96/EC)

2705.3 EN 20-05-2008 10:03 Pagina 3

Downloaded From TV-Manual.com Manuals

2Your TV

This section gives you an overview of the controls

and functions of this TV.

2.1 Television overview

Controls

1LightGuide

2Indicator light

3Remote control sensor

4Volume up and down

5Menu

6Program/Channel up and down

7Power switch

Connectors

1Back connectors

2Side connectors

For more info see section 7 Connections.

Remote control

1Switch On or switch to Standby

2Watch a connected device - DVD,VCR ...

3Programme guide

4Volume up + or down -

5Ambilight On or Off

6Program/Channel up + and down -

7Menu On or Off

8Navigation and Rotary key

9Colour keys

For more info see section 5.1 Remote control

overview.

4 Your TV

DEMO

SOURCE

UNIVERSAL MODE

2705.3 EN 20-05-2008 10:03 Pagina 4

Downloaded From TV-Manual.com Manuals

ENGLISH

2.2 Product highlights

Your new TV is equipped with some of the most

modern audio or video innovations.

Your TV offers the following advantages ...

Full High Definition LCD display

A full HD resolution of 1920x1080p, the highest

resolution of HD sources. It offers a brilliant flicker-

free progressive scan picture with optimum

brightness and superb colours.

Ambilight

For a more relaxed viewing experience and

improved perceived picture quality.

Perfect Pixel HD

Offers perfect picture quality from any source.

100Hz Clear LCD (if present)

100Hz Clear LCD gives a superior motion

sharpness, better black level,high contrast with a

flicker-free, quiet image and a larger viewing angle.

DVB-T and DVB-C integrated tuner

Next to normal analogue TV broadcast your TV

receives digital terrestrial and in certain countries

also digital cable TV and radio broadcasts.

Electronic Programme Guide - EPG

The EPG shows the scheduled digital TV

programmes on screen.The guide can remind you

when programmes start, switch the TV on, etc.

HDMI connectors

HDMI connectors for highest quality high definition

connectivity.

USB connection / PC network connection

Multimedia connection for instantly view or play

your photos or music.

Universal remote control

Your TV remote control is a universal remote

control that can operate other devices such as

DVD players and recorders, digital receivers (STB)

or Home Theatre Systems (HTS) of Philips and

many other brands.

MPEG4 broadcast (if available)

A higher quality videostandard offered by HD

transmitted broadcasts.

3Get started

This section helps you with the positioning and the

first time installation of the TV.

3.1 Position the TV

Carefully read the safety precautions in section 1.1

Safety before you position the TV.

•Large screen TVs are heavy. Carry and handle the

TV with at least two persons.

•The ideal distance from which to watch TV is

three times its diagonal screen size.

•Position the TV where light does not fall directly

on the screen.

•Dim lighting conditions in the room for best

Ambilight effect.

•Position the TV 10 to 20cm away from the wall

for the best Ambilight effect.

•Your TV is equipped with a Kensington Security

Slot at the back of the TV for an anti-theft lock

(not supplied).

On 32” and 37”TV models.

On 42”, 47” and 52”TV models.

Your TV 5

2705.3 EN 20-05-2008 10:03 Pagina 5

Downloaded From TV-Manual.com Manuals

6 Your TV

3.2 Wall mounting - VESA

)Caution

Consider the TV’s weight when you wall mount it.

Improper mounting can result in severe injury or

damage. Koninklijke Philips Electronics N.V. bears

no responsibility for improper mounting or

mounting that results in accident or injury.

Your TV is prepared for VESA compliant wall

mounting.This bracket is not included.

You need one of the VESA codes hereunder to

purchase the bracket that fits your TV.

32” / 81cm VESA MIS-F 200, 200, 6

37” / 94cm VESA MIS-F 200, 200, 8

42” / 107cm VESA MIS-F 300, 300, 8

47” / 119cm VESA MIS-F 400, 400, 8

52” / 132cm VESA MIS-F 400, 400, 8

Ask your dealer for more info on stands and

wallmount brackets.

The VESA fixation points

Locate the four fixation points at the back of the

TV.

On a 32” / 81cm TV model.

On other TV screensizes.

Unmount the TV stand

‡Locate the four screws of the TV stand.

The 32” / 81cm TV model has two screws.

On a 32” / 81cm TV model.

On other screensizes.

®Unscrew the screws.

Two screws on the 32” / 81cm TV model.

Four screws for other TV screensizes.

ÒLift the TV off the stand.

2705.3 EN 20-05-2008 10:03 Pagina 6

Downloaded From TV-Manual.com Manuals

3.3 Remote control batteries

‡Open the battery cover on the back of the

remote control.

®Insert the 3 batteries supplied (Type AAA-

LR03-1,5V). Make sure the +and -ends of the

batteries line up correctly (inside of case is

marked.)

ÒClose the cover.

rNote

Remove the batteries if not using the remote

control for an extended period of time.

3.4 Antenna cable

‡Locate the antenna connection at the back of

the TV.

®Insert the antenna cable tightly into the

Antenna x socket.

3.5 Power cable

Keep the mains plug at the wall socket accessible at

all time.

The TV is never powered off completely and

consumes energy unless the mains cord is physically

unplugged.

Although this TV has a very low standby power

consumption, unplug the mains cord if you do not

use the TV for a long time to save energy.

‡Verify that your mains voltage corresponds with

the voltage printed on the sticker at the back of

the TV. Do not insert the mains cord if the

voltage is different.

®Insert the mains cord tightly.

On 32” and 37”TV models.

On 42”, 47” and 52”TV models.

On 42PFL9803,

Your TV 7

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 7

Downloaded From TV-Manual.com Manuals

4Use your TV

Learn how to operate your TV for daily use.

4.1 Turn on or off - Standby

rNote

The TV may take up to 15 seconds to turn on.

To turn on the TV:

•Press BPower at the right of the TV if the

standby indicator is off.

•Press Bon the remote control if the standby

indicator is on.

The LightGuide flashes during start up and turns

on completely when the TV is ready for use.

To switch to standby:

•Press Bon the remote control.

The LightGuide turns off and the standby

indicator is on.

To turn off:

•Press BPower at the side of the TV.

Both the LightGuide and the standby indicator

turn off.

8Use your TV

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 8

Downloaded From TV-Manual.com Manuals

9

ENGLISH

4.2 Watch TV

4.2.1 Switch channels

‡To switch TV channels:

•Press a number (1 to 999) or press P+ or P-

on your remote control.

•Press Program/Channel -or +on the side

controls of the TV.

®Press Rto return to the previously viewed TV

channel or connected device.

4.2.2 Adjust volume

‡To adjust the volume:

• Press V+ or - on the remote control

• Press Volume + or - on the side controls

of your TV.

®To m ute the sound:

• Press ¬.

• Press ¬again to restore the sound.

4.3 Watch channels from a

digital receiver

‡ Switch on the digital receiver.

The picture from your receiver automatically

appears on the screen.

®Use the remote control of your digital receiver

to select TV channels.

If the picture does not appear:

‡Press the Source vkey.

®Press oor œto select where you connected

your digital receiver.

ÒPress OK.

rNote

When you did not connect your devices yet, go to

section 7 Connections.

4.4 Watch connected devices

‡ Switch on the device.

The picture from your device automatically

appears on the screen.

If the picture does not appear:

®Press the Source vkey.

ÒPress oor œto select where you connected

your device.

†Press OK.

rNote

When you did not connect your devices yet, go to

section 7 Connections.

Use your TV

GHI

CLOCK

PQRS

JKL

TUV

MNO

WXYZ

ABC DEF

ABC DEF

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

SOURCE

2705.3 EN 20-05-2008 10:03 Pagina 9

Downloaded From TV-Manual.com Manuals

4.5 Watch a DVD

‡Switch on your DVD player.

®Insert a DVD disc in your player.

The DVD picture automatically appears on the

screen.

ÒPress Play πon the DVD player.

If the picture does not appear:

‡Press the Source vkey.

®Press oor œto select where you connected

your DVD player.

ÒPress OK.

Wait a few seconds until the picture appears.

†Press Play π.

4.6 Select a Teletext page

Most TV channels broadcast information through

Teletext.

To watch Teletext:

‡Press Teletext.

The main index page appears.

®To select a page of your choice:

• Enter the page number with the number keys.

• Press P- or P+ or oor œor the gkey to

view the next or the previous page.

•Press a colour key to select one of the colour

coded items at the bottom of the screen.

•Press R to return to the previously viewed

page.

ÒPress Teletext again to switch Teletext off.

rNote

Only for UK: some digital TV channels offer

dedicated digital text services (for example BBC1).

For more information on teletext, see section 5.6

Teletext.

10 Use your TV

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

SOURCE

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

TELETEXT

2705.3 EN 20-05-2008 10:03 Pagina 10

Downloaded From TV-Manual.com Manuals

11

ENGLISH

Use your TV

4.7 Change Ambilight mode

You can adjust the speed at which Ambilight

responds to the on-screen images.

Adjust the Ambilight mode:

‡Press Ambilight to switch on.

®Press Mode to adjust Ambilight between a

relaxed and a dynamic setting.

The Mode settings are only available if Ambilight

colour is set to Active mode in the Ambilight menu.

When a fixed colour has been selected the Mode

key has no function. See section 5.5 Ambilight.

LoungeLight mode (if available)

When the TV is in standby, you can switch

Ambilight on.

‡Press Ambilight.Wait until Ambilight lights up.

®Press Mode repeatedly to toggle through the

available Ambilight effects.

For more information on Ambilight, see section 5.5

Ambilight.

àTip

Dim lighting conditions in the room for best

Ambilight effect.

GHI

CLOCK

PQRS

JKL

TUV

MNO

WXYZ

ABC DEF

2705.3 EN 20-05-2008 10:03 Pagina 11

Downloaded From TV-Manual.com Manuals

5Use more of your TV

This section helps you perform advanced TV

operations including how to:

•use the menus

•adjust picture, sound and Ambilight settings

•make use of Teletext

•create favourite channel lists

•make advantage of Electronic Programme Guide

•set locks and timers

•set subtitles and select a subtitle language

•view your photos or play your favourite music

from a USB memory device or from your PC or

Home network.

12 Use more of your TV

5.1 Remote control

5.1.1 Remote control overview

1Standby B

To switch the TV on or back to standby.

2Source v

•To switch the Source menu on or off.

•To select a connected device or to return to

TV.

3TV

Sets the remote control in TV mode.

4Teletext

To switch teletext on or off.

5Colour keys

•Easy selection of teletext pages.

•Easy selection of tasks.

Demo

To switch the Demo menu on and to get a

demonstration of the features of the TV.

6 Guide a

To switch on or off the Electronic Programme

Guide.

7Navigation and rotary key

To navigate (o,œ,p,π) or turn left or right

to go through lists or settings.

8OK

•To display the channel list.

•To activate a setting.

9 Back key g

To select the previous programme or the

previous TXT page.

To remove the channel list.

10 Audio and video keys Ò,π/º,†,‡,®

To operate a DVD player or recorder, Blu-ray

Disc player or VCR.

Cancel (only for UK)

To cancel only Digital text or Interactive

services.

11 Volume V

To adjust the volume.

12 Mute ¬

To m ute the sound or restore it.

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 12

Downloaded From TV-Manual.com Manuals

13

ENGLISH

Use more of your TV

13 Number keys

To select a TV channel.

14 Clock

To display the time on screen.

15 Ambilight

To switch Ambilight on or off.

16 Mode

To adjust the dynamic effect of Ambilight

17 Previous channel R

To return to the previously viewed channel

18 +P- Channel up or down

To switch to the next or previous channel in

the channel list.

19 Menu Ï

To switch the menu on or off

20 On screen information i

To show channel or programme information if

available.

21 Dual screen b

To show teletext on the right and the picture

on the left of the screen.

22 Subtitle

To activate or deactivate the subtitle mode.

23 Widescreen Picture format q

To select a picture format.

24 DVD STB HTS

To control connected devices.

See section 10 Index to find the section in the

manual about a specific remote control key.

5.1.2 Universal remote control

Your TV remote control is a universal remote

control that can operate other devices such as

DVD players and recorders, digital receivers (Set-

top boxes – STB) or Home Theatre Systems (HTS)

of Philips and many other brands.

‡Press DVD,STB or HTS to select a DVD, a

cable receiver (STB) or a Home Theatre (HTS)

device.The key blinks as long as you are in this

control.

®Use the relevant keys on the TV remote control

to operate the device.

If the device does not react or operates

incorrectly, you need to set up your remote

control for your particular device.

See section 5.1.3 Set to operate a particular

device.

ÒPress the TV key to return to normal TV mode.

When no key is pressed for 30 seconds the

remote control switches back to normal TV.

5.1.3 Set to operate a particular device

You can choose from three ways to programme the

remote control for a device of a particular brand.

You can:

-use the Universal remote control assistant to

help you

-enter a brand's setup code or

-start an auto search.

rNote

Possibly the remote control is not compatible with

all types of DVD, cable receivers and Home Theatre

Systems.

Method 1: Use the Universal remote control

assistant

‡Turn on your device.

®Press the DVD,STB or HTS universal mode key

for 4 seconds to select the universal mode you

need or press Menu Ïand select Setup >

Installation > Remote control assistant and

press πto enter.

- DVD stands for DVD, DVD-R, HDD and Blu-

ray Disc

-STB stands for digital receiver and set-top-

boxes (cable, satellite)

-HTS for Home Theatre Systems, Audio/Video

systems

The remote control is now in the selected

programming mode. Follow the instructions on

screen.

rNote

Ensure that the TV and the device are within reach

of the remote control.

Method 2: Enter the setup code directly

Instead of using the Universal remote control

assistant, you can also enter a setup code directly.

Find a list of these codes per brand and device at

the end of this manual.

‡Press the DVD,STB or HTS key and OK at the

same time for 4 seconds to select the universal

mode you need.

®Enter the three-number code for the type and

brand of your device. Some brands have several

setup codes available and you need to select

the known one.You can try them one by one.

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

UNIVERSAL MODE

2705.3 EN 20-05-2008 10:03 Pagina 13

Downloaded From TV-Manual.com Manuals

If you entered a known code, all universal mode

keys will blink to confirm the selection. If you

entered an unknown code, all universal mode

keys will light up for 2 seconds. Repeat Step 2

with a different code.

ÒPoint the remote control at the device, and

press Bto test if the code is known for your

device.

If successful try whether you can operate all

functions. If not successful, or if you cannot

operate all functions, repeat Step 1 and 2 with

one of the other setup codes for your brand.

Method 3:Automatic search of all codes

If you are not successful to find the known brand

or code, try an automatic search of all codes.The

automatic search can take several minutes.

If after the automatic search no code is successful, it

is not possible to operate your particular device

with the remote control. In such case, use the

device's own remote control.

‡Turn on the device you want the TV remote

control to set up for.

®.Point the remote control to the device during

the automatic search.

ÒTo select the universal mode you need, press

the DVD,STB or HTS key and the OK key at

the same time for 4 seconds.

The selected universal mode lights up

constantly.

†Press OK to start the automatic search.

Every two seconds, when a new code is sent,

the Bkey will blink.

Keep pointing the remote control to the device.

ºWhen the device switches off, press OK to

stop the search.

◊Press Bto switch on your device.

‹Press the remote control keys to try if you can

operate all functions. If you cannot operate all

functions, press OK again to continue the

automatic search for a correct code.

≈If you can operate all functions, press the

currently selected universal mode key to

confirm and to quit the automatic search.

rNote:

To pause the automatic search, press OK.Press o

or œto search for the codes one by one backward

or forward to locate the known code for your

device or press OK again to continue the

automatic search.

5.1.4 Keep the remote control in the

chosen universal mode permanently

If you press the DVD, STB or HTS key the remote

control can operate other devices. When no key is

pressed for 30 seconds the remote control

switches back to normal TV.

You can set the remote control to hold a universal

mode as long as no other universal mode is

pressed.This disables the 30 seconds switch back to

normal TV.

‡Press the TV key.

®Press OK and ¬at the same time for 4

seconds.The Bkey lights up for 2 seconds.

From now on the remote control will not switch

back to normal TV mode.

To return to the 30 seconds switch back to

normal TV mode, follow the same steps 1 and 2.

5.1.5 Device functions overview

When the remote control is set for a particular

device all keys have the same function except the

keys mentioned here.

•DVD player

Menu key = DVD Disc menu

P+/- = DVD Next/Previous track

•DVD Recorder

Òkey = DVD-R previous track

†key = DVD-R next track

•DVD recorder with Hard Disc Drive

Menu key = DVD-R HDD browser

Òkey = DVD-R HDD previous track

†key = DVD-R HDD next track

•Blu-ray Disc player

a key = BD Content menu

Menu key = BD Disc menu

14 Use more of your TV

2705.3 EN 20-05-2008 10:03 Pagina 14

Downloaded From TV-Manual.com Manuals

•Digital or Satellite receiver

No change of functions.

•Home Theatre System

Menu key = HTS Disc menu

Vkey = HTS volume

P+/- = HTS Next/Previous

5.1.6 Remote control setup codes

See the end of this manual.

5.2 LightGuide brightness

The LightGuide at the front of the TV indicates the

start up of the TV.

After start up the LightGuide is lit constantly.You

can set the light intensity or let it switch off after

start up.

‡Press Menu Ï> Setup > Installation >

Preferences > LightGuide brightness.

®Press πto enter the list.

ÒPress oor œto select the brightness level

from 0 (off) to 4.

5.3 TV menus

With the on screen menus you install your TV,

adjust picture, sound and Ambilight settings and

access features.This section gives an overview of

the menus and describes how to navigate.

5.3.1 The menu

‡Press Menu Ïto show the TV menu.

®Press Menu Ïto quit the TV menu.

The TV menu offers the following items:

•Smart settings

Select this item to set the TV to one of the

predefined settings. Each setting combines

picture, sound and Ambilight.

•Picture

Select this menu item to adjust all picture

settings.

•Sound

Select this menu item to adjust all sound settings.

•Ambilight

Select this menu item to adjust all Ambilight

settings.

•Settings assistant

Use the Settings assistant to guide you through

basic picture, sound and Ambilight settings in an

easy way.

•Features

Select this item for other feature settings.

•Setup

Select this item

-for installation and to update the TV software;

-to make use of the Remote control assistant

which will help you to setup your remote

control to operate other devices;

TV m

e

n

u

Soun

d

Ambili

g

h

t

Settin

g

s assistan

t

F

ea

t

u

r

es

Setu

p

Smart settin

g

s

Pi

c

t

u

r

e

15

ENGLISH

Use more of your TV

2705.3 EN 20-05-2008 10:03 Pagina 15

Downloaded From TV-Manual.com Manuals

-to use the connection assistant which will help

you to connect your devices to the TV.

5.3.2 Use of the menu

Learn to use the menus with this example.

‡Press Menu Ï.

The TV menu appears on the screen.

®Press oor œto select Picture.

ÒPress πto enter the picture settings.

†Press œto select Brightness.

ºPress πto enter the brightness setting.

◊Press oor œto adjust the setting.

‹Press pto return to the Picture settings or

press Menu Ïto quit the TV menu.

rNote:

More choices come available when digital channels

are installed and broadcasted.

5.4 Picture and Sound settings

The first time you switched on the TV you have

selected your preferred settings for picture, sound

and Ambilight.The following sections describe how

to modify or read just those settings.

5.4.1 Smart settings

Sets the TV to one of the predefined settings. Each

setting combines picture, sound and Ambilight.

‡Press Menu Ïand select Smart settings.

®Press πto enter the list.

ÒPress oor œto select a setting.

†Press OK.

ºPress Menu Ïto quit the TV menu.

Smart settings: Personal,Vivid, Standard, Movie,

Energy saving, Game.

5.4.2 Settings assistant

Use the Settings assistant to guide you through

basic picture and sound settings in an easy way.

‡Press Menu Ï,select Follow the instructions

on screen.

®Select Settings assistant and press πto enter.

ÒPress the green key to start the assistant.

†Press por πto select the left or right side to

make your choice.

ºWhen finished, press the green key to store all

your settings.

Bri

g

htness

Pi

c

t

u

r

e

Bri

g

htness

C

ontras

t

C

olou

r

H

ue

Tin

t

...

Shar

p

ness

Bri

g

htness

98

52

0

4

N

o

i

se

r

educ

ti

on

47

Pi

c

t

u

r

e

C

ontras

t

C

olou

r

H

ue

Tin

t

...

Shar

p

ness

Bri

g

htness

90

52

0

4

N

o

i

se

r

educ

ti

on

47

C

ontras

t

TV m

e

n

u

Soun

d

Ambili

g

h

t

Settin

g

s assistan

t

F

ea

t

u

r

es

Setu

p

Smart settin

g

s

Pi

c

t

u

r

e

16 Use more of your TV

2705.3 EN 20-05-2008 10:03 Pagina 16

Downloaded From TV-Manual.com Manuals

5.4.3 Picture settings

This section describes how to adjust all picture

settings individually.

‡Press Menu Ï.

®Select Picture and press πto enter the list.

ÒPress oor œto select a setting.

•Contrast

Changes the level of bright parts in the picture

but keeps the dark parts unchanged.

•Brightness

Changes the level of light of the total picture.

•Colour

Changes the level of saturation.

•Hue

If NTSC is broadcasted, this level compensates

the colour variations.

•Sharpness

Changes the level of sharpness of fine details.

•Noise reduction

Filters out and reduces the noise in the picture.

Set the level to Minimum, Medium, Maximum or

Off.

•Tint

Sets the colours to Normal, Warm (reddish) or

Cool (bluish). Select Custom to make a setting of

your own in the Custom menu.

•Custom

Press the green key to select each bar to

change the value of:

- R-WP red whitepoint

- G-WP green whitepoint

- B-WP blue whitepoint

- R-BL red blacklevel

- G-BL green blacklevel

•Perfect Pixel HD

Controls the advanced settings of the Perfect

Pixel HD Engine, resulting in best sharpness,

contrast, colour and motion.

-HD Natural Motion

Removes motion judder and reproduces

smooth movement especially in movies.

-100 Hz Clear LCD (if present)

Gives a superior motion sharpness, better black

level, high contrast with a flicker-free, quiet

image and a larger viewing angle.

-Advanced sharpness

Enables superior sharpness, especially on lines

and contours in the picture.

-Dynamic contrast

Sets the level at which the TV automatically

enhances the details in dark, middle and light

areas of the picture.

-Dynamic backlight

Sets the level at which power consumption can

be reduced by dimming the brightness intensity

of the screen.

Choose for the best power consumption or for

the picture with the best brightness intensity.

-MPEG artefact reduction

Smooths the digital transitions in the picture.

-Colour enhancement

Makes the colours more vivid and improves the

resolution of details in bright colours

•Active control

Corrects all incoming signals in order to provide

the best picture possible.

Switches Active control on or off.

•Light sensor

Adjusts the picture and Ambilight settings on the

lighting conditions of the room. Switches Light

sensor on or off.

•Picture format / Auto format mode

See section 5.4.4 Widescreen picture format.

Pi

c

t

u

r

e

P

e

rf

ec

t Pix

e

l H

D

HD N

a

t

u

r

a

l M

o

ti

on

1

00

Hz

C

lear L

CD

Advanced shar

p

n..

.

D

y

namic contras

t

N

o

i

se

r

educ

ti

on

Tin

t

Pi

c

t

u

r

e

f

o

rm

at

A

u

t

o

f

o

rm

a

t m

ode

A

c

tiv

e

co

ntr

ol

MPE

G

a

rt

e

f

ac

t r

ed

..

.

C

olour enhance..

.

Li

g

ht senso

r

...

P

e

rf

ec

t Pix

e

l H

D

Pi

c

t

u

r

e

C

ontras

t

Bri

g

htness

C

olou

r

H

ue

Perfect Pixel HD

Tin

t

Shar

p

ness

N

o

i

se

r

educ

ti

on

Active control

A

u

t

o

f

o

rm

a

t m

ode

Pi

c

t

u

r

e

f

o

rm

at

Li

g

ht senso

r

TV m

e

n

u

Soun

d

Ambili

g

h

t

F

ea

t

u

r

es

Setu

p

Smart settin

g

s

Pi

c

t

u

r

e

Use more of your TV 17

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 17

Downloaded From TV-Manual.com Manuals

5.4.4 Widescreen picture format

Avoid black bars on the sides or on top and

bottom of the picture. Change the picture format

to a format that fills the screen.

‡Press qto switch on the Picture format

menu.

®Press oor œto select an available picture

format.

ÒPress OK.

†Press oto shift the picture upwards if subtitles

are hidden.

àTip

For minimal distortion, select the Auto format

setting.

•Auto format (Not for PC.)

Enlarges the picture automatically to fill the

screen. Subtitles remain visible.You can set Auto

format in two different modes.

‡In the TV menu, select Picture > Auto format

mode.

®Select Auto-fill to fill the

screen as much as

possible. Select Auto-

zoom to keep the original

picture format but black

bars may be visible.

•Super zoom (Not for HD.)

Removes the black bars on

the side of 4:3 broadcasts.

There is a minimal

distortion.

•4:3 (Not for HD.)

Shows the classical 4:3

format.

•Movie expand 14:9

(Not for HD.)

Scales the format to 14:9.

•Movie expand 16:9

(Not for HD.)

Scales the format to 16:9.

•Wide screen

Stretches the format to

16:9.

•Unscaled

(Only for HD and PC.)

Maximum sharpness.

Distortion may appear on

borders. Black bars may

appear with pictures from

your PC.

rNote

Do not forget to name the connection in the

Connection menu. See section 7.5.1 Naming your

devices.

5.4.5 Sound settings

This section describes how to adjust all sound

settings.

‡Press Menu Ïand select Sound.

®Press πto enter the list.

ÒPress oor œto select a setting.

•Equalizer

Changes the bass and treble of the sound. Select

each bar to change the setting.

•Volume

Changes the volume. When adjusting the volume

with Va volume bar appears. If you do not

want it to appear go to Menu > Setup >

Installation > Preferences and press πto enter

the list and select Volume bar off.

TV m

e

n

u

Soun

d

E

q

ualize

r

V

o

l

u

m

e

Volume - Visuall

y

..

.

B

a

l

a

n

ce

Audio lan

g

ua

ge

Ambili

g

h

t

F

ea

t

u

r

es

Setu

p

TV speakers

Dual I

/

I

I

Mono

/

Stere

o

Surround mode

Head

p

hone volum

e

A

u

t

o

v

o

l

u

m

e

l

e

v

e

l..

.

D

e

lt

a

v

o

l

u

m

e

A

u

t

o

su

rr

ou

n

d

Soun

d

Smart settin

g

s

Pi

c

t

u

r

e

18 Use more of your TV

TELETEXT SUBTITLE

UNIVERSAL MODE

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 18

Downloaded From TV-Manual.com Manuals

•Volume – Visually impaired (UK only)

Changes the volume of the selected Visually

impaired audio language in the Setup, Installation

menu. See section 6.1 Automatic installation.

•Balance

Sets the balance of the left and right

loudspeakers to fit best your listening position.

•Audio language

A list of audio languages for the current

programme may be available when digital

channels are installed and broadcasted.

To permanently change the audio language, see

section 6 Channel installation.

•Dual I/II

If broadcasted, you can choose between two

different languages.

•Mono/stereo

If stereo broadcasting is available, you can select

Mono or Stereo per TV channel.

•TV speakers

If you have connected an audio system to your

TV, you can switch off the TV speakers.

If your audio system supports Easylink, see

section 7.2.2 Easylink.

Select Automatic to have the sound from your

TV automatically reproduced by your audio

system.

•Surround mode

To select a more spatial sound if broadcasted or

if available from a connected device.

•Headphone volume

Changes the volume of the headphone.

You can mute the TV speakers with ¬on the

remote control.

•Auto volume levelling

Reduces sudden volume differences like at the

beginning of commercials or when switching from

one channel to another.

Select on or off.

•Delta volume

Levels out volume differences between channels

or connected devices.

‡Switch to the channel or device you want to

level out the volume difference.

®Select Delta volume in the Sound menu and

change the volume level.

•Auto surround

Switches the TV automatically to the best

surround sound mode dependant on the

broadcast.

Select on or off.

5.5 Ambilight

You can adjust Ambilight settings.

‡Press Menu Ï and select Ambilight.

®Press πto enter the list.

ÒPress oor œto select a setting.

•Ambilight

Switches Ambilight on or off.

•Active mode

Adjusts the speed at which Ambilight responds to

the on-screen images..

Only available when Active mode has been

selected in the Ambilight colour menu.

Relaxed sets Ambilight to change soft and

smoothly with the images on screen.

Dynamic sets Ambilight to change quick and

responsive.

•Brightness

Changes the light output of Ambilight.

•Colour

Sets the Ambilight colour to either dynamic

behaviour (Active mode) or one of the

predefined Ambilight fixed colours.

Custom allows fine tuning of a fixed colour.

•Separation

Sets the difference in colour level between the

Ambilights at the sides of the TV.

Separation off gives a dynamic but uniform

colour Ambilight.

çCaution

To avoid bad infrared remote control reception,

place your devices out of sight of Ambilight.

Ambili

g

h

t

C

olou

r

A

c

tiv

e

m

ode

Bl

ue

W

a

rm whit

e

C

ool whit

e

C

usto

m

C

olou

r

Se

p

aratio

n

Ambili

g

h

t

A

c

tiv

e

m

ode

Bri

g

htness

TV m

e

n

u

Ambili

g

h

t

Ambili

g

h

t

C

olou

r

A

c

tiv

e

m

ode

Bri

g

htness

Se

p

aratio

n

Ambili

g

h

t

F

ea

t

u

r

es

Setu

p

Smart settin

g

s

Pi

c

t

u

r

e

Soun

d

Use more of your TV 19

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 19

Downloaded From TV-Manual.com Manuals

5.6 Teletext

Your TV has a 1200 pages memory that stores

broadcasted teletext pages and subpages to reduce

waiting time.

To select a teletext page see section 4.6 Select a

Teletext page.

5.6.1 Select a teletext language

Some digital TV broadcasters offer the possibility to

select your preferred teletext language. See section

6.1 Automatic installation.

5.6.2 Select pagenumber subpages

A teletext page number can hold several subpages.

The pages are shown on a bar next to the main

pagenumber.

‡Press Teletext.

®Select a teletext page.

ÒPress por πto select a subpage.

5.6.3 Select T.O.P. teletext broadcasts

T.O.P. teletext (Table of Pages) is not broadcast by

all TV channels. You can easily jump from one

subject to another without using pagenumbers.

‡Press Teletext.

®Press i.

The T.O.P. overview appears.

ÒUse por π,oor œto select a subject.

†Press OK to view the page.

5.6.4 Dual screen teletext (not available for

channels with Digital Text services)

View the TV channel and teletext next to each

other.

‡Press bfor Dual screen teletext.

®Press Teletext again to show normal teletext.

ÒPress Teletext to switch off teletext.

5.6.5 Search teletext

Quickly jump to a subject linked to a series of

pagenumbers or search for specific words in

teletext pages.

‡Press Teletext.

®Press OK to highlight the first word or number.

ÒPress por π,oor œto jump to the next

word or number on the page.

†Press OK to search a page which holds the

highlighted word or number.

ºPress ountil no word or number is highlighted

to quit Search.

5.6.6 Enlarge teletext pages

For a more comfortable reading, you can enlarge

the teletext page.

‡Press Teletext and select a teletext page.

®Press qto enlarge the top part of the page.

ÒPress qagain to view the enlarged lower

part of the page.

†Press oor œto scroll through the enlarged

page.

ºPress qagain to return to the normal page

size.

5.6.7 Teletext menu

With the options in the teletext menu you can

reveal hidden info, let cycle subpages automatically

and change the character setting.

•Reveal

Hide or unhide hidden information on a page,

such as solutions to riddles or puzzles.

•Cycle subpages

If subpages are available for the selected page,

you can make subpages cycle automatically.

20 Use more of your TV

TELETEXT SUBTITLE

UNIVERSAL

MODE

DEMO

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

TELETEXT

TELETEXT SUBTITLE

UNIVERSAL MODE

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 20

Downloaded From TV-Manual.com Manuals

•Language

Some languages use a different set of characters.

Switch to the other group to show the text

correctly.

‡Press Teletext.

®Press Menu Ï.

ÒPress oor œto select an option.

†Press OK to change a setting.

ºPress Menu Ï to quit the teletext menu.

◊Press Teletext to switch off teletext.

5.6.8 Digital text services (UK only)

Some digital TV broadcasters offer dedicated digital

text or interactive services (for example BBC1) on

their digital TV channels.These services work as

normal Teletext with the number, colour and

navigation keys to select and navigate.

‡Press Teletext.

®Press por π,oor œto select or highlight

items.

ÒPress one of the colour keys to select an

option.

†Press OK to confirm or activate.

ºPress ‡Cancel to cancel Digital text or

interactive services.

çCaution

Digital text services are blocked when subtitles are

broadcasted and Subtitle On is set in the Features

menu. See section 5.10 Subtitles.

5.6.9 Teletext 2.5

If broadcasted by the TV channel this teletext offers

more colours and better graphics.

Teletext 2.5 is switched on as a factory setting.

‡Press Menu Ïon the remote control and

select Setup > Installation > Preferences >

Teletext 2.5 and press πto enter the list.

®Select on or off.

5.7 Create favourite channel

lists

View the All channels list or set up a Favourite list

of your own with your preferred TV channels and

radio stations.

5.7.1 Select a favourite list

You can select one of the favourite channel lists.

‡Press OK.

The first time after you have finished the

installation, the All channels list is shown. In

other situations, it brings up the last selected

favourite list.

®Press the red key to show all favourite lists.

ÒPress oor œto select a list.

†Press OK.

The selected favourite list appears.

ºPress OK again to quit.

5.7.2 To set up a favourite list

Create or modify your own favourite list.

‡Press OK.

The last selected list appears.

®Press the red key to show all favourite lists.

ÒPress oor œto select a list.

†Press OK.

ºPress the green key to enter the Edit mode.

The selected list brings up a full channel list.

◊Press oor œto highlight a channel.

‹Press OK to mark (or unmark) the highlighted

channel.The channel is added to (or removed

from) the selected list.

≈Press the green key again to leave the Edit

mode.

The modified channel list appears again.

All

c

h

a

nn

e

l

s

....

EXT

3

3 Di

g

ital channel

2

4 R

ad

i

o

c

h

a

nn

e

l

1

2 Di

g

ital channel

1

1 Analo

g

ue channel

1

....

Select lis

t

A

Teletext menu

Reveal

Language Gr. II

Off

Cycle subpages

Off

Use more of your TV 21

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 21

Downloaded From TV-Manual.com Manuals

5.7.3 Select a channel from a favourite list

‡Press OK.

The last selected channel list appears.

®Use oor œ to highlight a channel.

ÒPress OK.

The TV tunes to that channel.

àTip

•Use -P+ to go through the TV channels of the

selected favourite list.

•With the number keys you can still select

channels which are not marked as favourite.

5.8 Electronic Programme

Guide - EPG -

The Electronic Programme guide is an on screen

guide to scheduled digital TV programmes.

You can navigate, select and view programmes by

time, title or genre.There are two types of EPG,

‘Now and Next’ and ‘7 or 8 day’ EPG.

When digital channels are installed and

broadcasted, EPG is available. ‘Now and Next’ is

always available but the ‘7 or 8 day’ EPG is only

available in some countries.

With the EPG menu you can...

•see a list of current broadcasted programmes

•see the next programme

•group programmes by genre

•set reminders when programmes will start

•set up preferred EPG channels

•etc.

5.8.1 Switch on EPG

‡Press a.

The following type of EPG appears:

‘Now and Next’ EPG

Detailed information about the current programme

is shown.

Or

‘7 or 8 day’ EPG

It may take some time to receive the EPG data.

The list of TV programmes will show.

26 BBC1 Tue., 12 Sep 09:17

Title : Commonwealth Games

Info: 7:50 - 12:30 : 280 min

..........

Exi

t

Press -P+ to chan

g

e channel

.

N

e

x

t

22 Use more of your TV

GHI

CLOCK

PQRS

JKL

TUV

MNO

WXYZ

ABC DEF

-

TELETEXT SUBTITLE

UNIVERSAL MODE

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 22

Downloaded From TV-Manual.com Manuals

®Use the colour keys to activate the available

actions at the bottom of the screen.

• Next:to show information about the next

programme.

•Remind:to mark or unmark a programme as a

reminder.

•Watch:to watch or listen to a current

programme.

•Jump to...: to jump to the next or previous day.

•Info:to display information on a selected

programme (if available).

ÒPress ato quit the EPG.

5.8.2 More on ‘7 or 8 day’ EPG

Search by genre, scheduled reminders, etc. are

managed in the Programme guide menu.

‡Press a on the remote control.

®Press Menu Ï.

The Programme guide menu appears.

ÒPress oor œto select a menu option.

†Press πto enter.

ºPress oor œto make a selection.

◊Press OK to activate or press the green key to

watch

‹Press ato quit the EPG.

rNote

Only channels marked as Preferred EPG channels

appear in the Programme guide menu.

Pro

g

ramme

g

uid

e

Wh

a

t'

s

on

12:30 South Toda

y

1

3

:

00

In aller Freun

d

11:50 Workin

g

Lunc

h

11:

55

Melrose Plac

e

Preferred EP

G

ch..

.

Ac

q

uire EPG dat

a

Wh

a

t'

s

on

Search b

y

g

enr

e

Scheduled remind..

.

Programme guide Tue., 12 Sep

09:55

BBC ONE

BBC TWO

five

BBC THREE

BB

C

F

OUR

abc1

09:50 Tweenies

09:00 The Wright Stuff

05:32 This is BBC THREE

05

:

3

2 This is BB

C

F

OUR

09

:2

0

Moonli

g

htin

g

12:30 Commonwealth

10:15 Something Special

10:30 Trisha Goddard

12:00 This is BBC THREE

12:

00

This is BB

C

F

OUR

1

0

:1

5

D

add

i

o

Around Next

07:50 Commonwealth

1

3

:

50

Anastasia

00

1

0

- EEN

R

e

min

d

W

a

t

ch

Inf

o

Jum

p

to ..

.

Use more of your TV 23

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 23

Downloaded From TV-Manual.com Manuals

Use more of your TV

5.9 Timers and locks

This section describes how to switch the TV on or

off at a specified time and to lock or unlock the TV.

5.9.1 Automatically switch to standby

Sleeptimer switches the TV to standby after a time.

‡Press Menu Ï on the remote control and

select Features > Sleeptimer and press πto

enter the sleeptimer bar.

®Press oor œto set the time up to 180

minutes in steps of 5 minutes. If set to 0

minutes, the Sleeptimer is switched off.

You can always switch off your TV earlier or reset

the time during countdown.

5.9.2 Automatically switch the TV on

On timer switches the TV on automatically to a

specified channel at a specified time, from standby.

‡Press Menu Ïon the remote control and

select Features > On timer and press πto

enter the On timer menu.

®Use por π,oor œto select and enter the

menu items one by one to set a channel, a day

of the week or daily, and a starting time.

ÒPress OK to confirm.

†Press Menu Ïto quit the menu.

àTip

To switch off the On timer, select Off in the On

timer menu.

5.9.3 Lock TV channels and programmes

Lock TV channels and/or programmes from

connected devices to prevent children from

watching them. Lock and unlock with a four number

code.

Set or change your code

‡Press Menu Ïon the remote control and

select Features > Set or Change code and press

πto enter your code.

®Enter your code with the number keys.

The Features menu reappears with a message

confirming that your code has been created or

changed.

Did you forget your code ?

‡Select Change code.

®Press π.

ÒEnter the overriding code 8-8-8-8.

†Enter a new personal code.

ºConfirm your new entered code.

The previous code is erased and the new code

is stored.

5.9.4 Activate or deactivate Child lock

Set your code and you can:

•Lock all channels and devices,

•Lock specific channels and devices,

•Set a time after which all channels and devices

are locked,

•Set the maximum allowed parental rating for

digital channels that are installed and broadcast.

‡Press Menu Ï.

®Select Features > Child lock and press π.

ÒEnter your code with the number keys.

†Select one of the options.

ºPress π.

Lock or unlock all channels and connected devices

‡Select Lock or Unlock.

Lock a certain programme or all channels from a

certain time

‡Select Custom lock.

®Press πto enter the Custom lock menu.

ÒPress πagain to enter the Lock after menu.

†Select On to switch on the Timer lock.

ºPress p.

◊Select Time.

‹Press π.

≈Enter the time with oor œand π.

ÚPress OK.

Lock one or more channels and connected devices

‡Select Custom lock.

®Press πto enter.

ÒPress oor œto select Channel lock.

†Press π.

ºPress oor œto select the channel(s) you

want to lock or unlock.

◊Each time press OK to lock or unlock the

channel.

C

hild loc

k

C

ustom loc

k

L

oc

k

a

ft

er

C

hannel loc

k

Parental ratin

g

L

ock

C

ustom loc

k

U

nloc

k

24

2705.3 EN 20-05-2008 10:03 Pagina 24

Downloaded From TV-Manual.com Manuals

Set an age rating to a digital programme

Some digital broadcasters have their programmes

rated (depending on your country). When the

rating is higher than your child’s age, the

programme will be locked.

‡Select Custom lock.

®Press πto enter.

ÒPress oor œto select Parental rating.

†Press π.

ºPress oor œto select an age rating.

◊Press Menu Ïto quit the Child lock menu.

5.10 Subtitles

For each TV channel, subtitles can be set, coming

from Teletext or DVB-T (digital) broadcasts.

If digital channels are installed and broadcasted, you

can select your preferred subtitle language.

5.10.1 Subtitling from analogue TV channels

‡Select an analogue TV channel.

®Press Teletext to switch on Teletext.

ÒEnter the three number pagenumber of the

subtitle page.

†Press Teletext to switch off Teletext.

rNote

The Teletext subtitle page of analogue channels

must be stored for each TV channel separately.

5.10.2 Activate or deactivate subtitling

‡Press Menu Ïon the remote control and

select Features > Subtitle and press πto enter

the list.

®Press oor œto select On to show the

subtitles always or On during mute to show the

subtitles only when the sound is muted with the

¬key on the remote control.

ÒPress pto return to the Features menu.

5.10.3 Select a digital subtitle language

If subtitle broadcasting is available with digital

channels, you can select a preferred subtitle

language out of a list of broadcasted languages.The

preferred subtitle languages set in the Installation

menu are overruled temporarily.

‡Press Menu Ïon the remote control and

select Features > Subtitle language and press π

to enter the list of available languages.

®Press oor œto select a subtitle language.

ÒPress OK.

5.11 Watch and play your

photos and music

Watch pictures or listen to music stored on a USB

device (not supplied with the TV), a camcorder

(only for photos) or from your PC network.Watch

your pictures as a slideshow or listen to a self made

music playlist.

rNote

Philips is not responsible if your USB device is not

supported nor shall Philips accept any liability for

damage or loss of stored data.

5.11.1 Insert the USB device

‡Insert a device at the side of the TV while the

TV is switched on.

A message appears that a USB device has been

detected.

rNote

In case the USB device does not automatically

break in, press Source v> USB/Memory devices

and press OK.

Select Side and press OK to display your

camcorder content.

5.11.2 Remove the USB device

‡Press Source v.

®Remove the USB device.

ÒSelect TV or another connected device to

watch a programme.

TV m

e

n

u

F

ea

t

u

r

es

C

ommon interfac

e

Subtitle

Subtitle lan

g

ua

ge

Slee

p

time

r

C

hild loc

k

Set/Chan

g

e cod

e

O

n time

r

D

e

m

o

F

ea

t

u

r

es

Pi

c

t

u

r

e

Smart settin

g

s

Soun

d

Ambili

g

h

t

Setu

p

Use more of your TV 25

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 25

Downloaded From TV-Manual.com Manuals

Use more of your TV

5.11.3 Watch your pictures, start a

slideshow and play music

Look up your pictures in the Picture album of your

USB device.

‡Select the Picture folder for the picture files you

have stored on your USB device.

®Press πto enter the Picture folder.

ÒPress oor œto select a picture or a picture

album.

†Press OK to watch the picture or to start a

slideshow of the pictures in the album.

ºPress OK to pause the slideshow. Press again to

restart.

◊Press one of the colour keys on the remote

control to perform the corresponding function

shown at the bottom of the screen.

If the function bar at the bottom disappeared,

press any colour key to let it reappear.

‹Press pand select another picture or another

album.

Slideshow settings

•Details / More details

Shows the picture name, date, size and next

picture in the slideshow.

•Transitions

Shows the list of available transition styles of the

pictures.

Press oor œto select and press OK to

activate.

•Slide time

Sets the time lag for the picture transitions:

Short, Medium or Long.

•Rotate

To rotate a picture.

•Start/Show/Pause

To stop, pause and restart the slideshow.

Thumbnails

Watch the pictures of a selected album in an

overview.

‡Select a picture album.

®Press πto enter the picture list.

ÒPress the blue key.

†Press oor œ,por πto highlight a picture.

ºPress OK to watch the picture.

◊Press pto return to the thumbnail overview.

‹Press the blue key again to go back to the

picture list.

Listen to music

Look up your songs in the Music album of your

USB device.

‡Select the Music folder for the music files you

have stored on your USB device.

®Press πto enter the Music folder.

ÒPress oor œto select a song or a music

album.

†Press OK to play the selected song or to play a

song followed by the next song in the same

album.

ºPress one of the colour keys on the remote

control to perform the corresponding function

shown at the bottom of the screen.

If the function bar at the bottom disappeared,

press any colour key to let it reappear.

Music settings

•Details

Shows the file name.

•Repeat one/all

Repeat all songs in the album until you stop a

song or only repeat the one song selected until

you stop the song.

•Shuffle

Play songs in a random sequence.

US

B

Afrika

_

200

1

—

Ken

y

a.

jpg

—

Ken

y

a.

jpg

Jean.

jpg

Mar

y

.

jpg

Pi

c

t

u

r

e

Afrika

_

200

1

Ken

y

a.

jpg

Con

g

o.

jpg

Victoria.

jpg

Cairo.

jpg

Paris

_

200

5

M

y

_car.

jpg

Afrika

_

200

1

Afrika

_

200

1

Afrika

_

200

1

Ken

y

a.

jpg

Con

g

o.

jpg

Victoria.

jpg

Dakar.

jpg

Cairo.

jpg

Ken

y

a.

jpg

US

B

Pi

c

t

u

r

e

Afrika

_

200

1

Paris

_

200

6

M

y

_car.

jpg

Jean.

jpg

Mar

y

.

jpg

M

us

i

c

Pi

c

t

u

r

e

26

2705.3 EN 20-05-2008 10:03 Pagina 26

Downloaded From TV-Manual.com Manuals

Watch a slideshow with background music

Watch a slideshow of your stored pictures

accompanied with your stored background music.

‡Select an album of songs first and press OK.

®Highlight the Picture folder and select an album

of pictures and press OK.

5.11.4 Watch photos or listen to music from

your PC

To watch photos and listen to music from a

connected PC, make sure:

-your router and PC are switched on

-a media server software is running on your PC.

See section 7.7 PC network.

‡Press the Source vkey on the remote

control.

®Select PC network and press π.

Wait until the PC content comes on.

ÒSelect the content you want to watch or listen

to and press π.

†Use por π,oor œto go through the

photo or music files or folders.

ºPress OK to watch or listen.

◊Press pto go back to the previous list.

See section 9 Troubleshooting in case of problems

playing files or in case your PC does not appear in

the PC network menu.

5.12 Listen to digital radio

channels

If digital broadcasting is available, digital radio

channels are installed during installation.

To listen to a digital radio channel:

‡Press OK on the remote control.

The All channels menu is displayed.

®Use the number keys to select a radio channel

available from channel number 400 onwards.

To reorder see section 6.3.3 Reorder the

channels.

ÒPress OK.

Use more of your TV 27

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 27

Downloaded From TV-Manual.com Manuals

Use more of your TV

5.13 Software update

Philips continually tries to improve its products.To

benefit, update the TV software regularly.To update

your TV software you need a USB Memory device

(not supplied).

Verify that your USB memory device has at least

128Mb free space. Make sure the write protection

is switched off. Some USB devices do not work

with our TV.

5.13.1 Update assistant

The Update assistant helps you to update the TV’s

software.

Step 1:TV identification

The TV has to identify with your USB memory

device.

‡Press Menu Ï> Setup.

®Press π.

ÒPress oor œto select Software update.

†Press π.

ºPress oor œto select Update assistant.

◊Press π.

‹Press OK to activate.

≈Insert a USB memory device into the USB

connector at the side of the TV.

The TV menu appears.

ÚPress the green key to proceed.

A message appears that the TV has successfully

written its identification file to the USB memory

device.

œPress the green key again to finish.

πRemove the USB memory device from the TV.

Step 2: Software download from the PC to

the USB device

‡Insert the USB memory device into a PC linked

to the internet.

®Locate and open the file update.htm on your

USB device.

ÒRead the instructions on screen and click on

the Send ID button.

If new software is available, the update is

downloaded on the USB memory device.

†Remove the USB memory device from your

PC.

Step 3: Software update transfer to the TV

The downloaded software on the USB memory

device must now be uploaded to your TV.

çCaution

•Never remove the USB memory device from the

TV during the software update.

•If a power drop occurs during the update, do not

remove the USB memory device from the TV.

When the power retuirns, the TV continues to

update.

‡Switch on the TV.

®Insert the USB memory device to the USB

connector at the side of the TV.

ÒThe TV switches off.The screen stays black for

about 10 seconds. Wait and do not use the

power switch Bon the TV.

Setu

p

Software u

p

dat

e

U

p

date assistan

t

C

urrent software ..

.

Local u

p

dates

Ann

ou

n

ce

m

e

n

t

I

n

s

t

alla

t

ion

Software u

p

dat

e

28

BSU

BSU

2705.3 EN 20-05-2008 10:03 Pagina 28

Downloaded From TV-Manual.com Manuals

Use more of your TV

†The update process starts automatically. Please

wait.

The update is finished when the message

‘Operation successful’appears on the screen.

ºRemove the USB memory device from the TV.

◊Press Bon the remote control.

Do not press more than once and do not use

the Power Bswitch on the TV.

‹The TV switches off.The screen stays black for

about 10 seconds. Please, wait.

≈The TV switches back on again.The update is

done.

5.13.2 Software update by digital broadcast

(DVB-T)

Your TV might receive new software from the

digital broadcast system automatically.

If you receive an update message on screen it is

strongly advised to update the software

immediately - select Now.

If you want to be reminded later on, select Later.

Select Cancel to quit the update (not

recommended). If you cancelled the update you can

still update yourself from the TV menu > Setup >

Software update > Local updates.

29

ENGLISH

B

S

U

Operation Successful! Re

P

r

g

B

S

U

BSU

TELETEXT SUBTITLE

UNIVERSAL MODE

SOURCE

DEMO

2705.3 EN 20-05-2008 10:03 Pagina 29

Downloaded From TV-Manual.com Manuals

Channel installation

6Channel installation

The first time you turned on your TV

•you have selected the language of the TV menus

and the country where you are located

•all the available TV Channels have been installed.

This chapter provides instructions on how to

reinstall channels as well as other useful channel

installation features.

rNote:

Re-installation will modify the All channels list and

new added channels will not be added to any

favourite list.

6.1 Automatic installation

This section describes how to search for and store

all available channels automatically.

Step 1: Menu language

Sets the language of the TV menus. Go to a next

step if your language settings are correct.

‡Press Menu Ïon the remote control and

select Setup > Installation > Languages and

press πto enter Menu language.

®Press oor œto select your language.

ÒPress OK to confirm.

†Press pto return to the Installation menu.

The Languages menu also offers the following

language settings when digital channels are installed

and broadcasted.

•Preferred audio language

Select one of the available audio languages as

primary preferred and secondary preferred

language.

•Preferred subtitle languages

Select one of the available subtitle languages as

primary preferred and secondary preferred

language. See section 5.10 Subtitles.

•Preferred teletext languages

Select one of the available teletext languages as

primary referred and secondary preferred

language.

•Hearing impaired

Select On to display the hearing impaired subtitle

version of your preferred audio or subtitle

language when available.

•Visually impaired (UK only)

Select to hear the additional commentary audio

(if available) in your selected audio language

through the loudspeakers of your TV or through

the headphones or through both

rNote:

If both Visually impaired and Hearing impaired are

enabled, the Visually impaired language will have

priority for audio, the Hearing impaired for subtitles.

•Preferred audio format

Select your preferred and available audio format

to achieve the best sound reproduction.

Select Advanced for the best sound reproduction

if a Home theatre system is connected to your

TV. Select Standard in all other cases.

Step 2: Select your country

Select the country where you are located.

The TV will install and arrange the TV channels

according to the country selected.

Go to a next step if your country selection is

correct.

‡Press œto select Channel installation.

®Press πto enter the Channel installation menu.

Automatic installation is highlighted.

ÒPress πto enter.

†Press OK.

The Country list appears.

ºPress oor œto select your country.

◊Press Next.

C

hannel install..

.

A

u

t

o

m

a

ti

c

in

s

t

a

ll..

.

Start no

w

A

u

t

o

m

a

ti

c

in

s

t

a

ll..

.

Installation u

p

dat

e

Start-u

p

messa

ge

Di

g

ital: Test rece

p

t..

.

Analo

g

ue: Manual..

.

Rearran

ge

In

s

t

a

ll

a

ti

on

Lan

g

ua

g

es

Menu lan

g

ua

ge

Primar

y

audi

o

Secondar

y

subtitl.

.

Primar

y

teletex

t

Secondar

y

teletex

t

Hearing impaired

gp

Visually impaired

im

m

Pr

e

f.

aud

i

o

f

o

rm

at

Lan

g

ua

g

es

Pr

e

f

e

r

e

n

ces

C

hannel install..

.

C

onnections assist

.

R

e

n

a

m

e

de

vi

ces

Audio setu

p

...

30

2705.3 EN 20-05-2008 10:03 Pagina 30

Downloaded From TV-Manual.com Manuals

Step 3: Select Antenna or Cable

This selection is only available when this TV is

prepared to receive DVB-C channels in your

country.

Select Antenna to install all digital terrestrial (DVB-

T) and analogue channels available.

Select Cable to install all digital cable (DVB-C) and

analogue channels available.

‡Press oor œto select Antenna or Cable.

®Press Next.

ÒIf the TV asks for it, enter the Network ID you

received from your provider.

rNote

You can do a Channel installation if you are both

connected to a digital antenna and a cable network.

Therefore do the installation twice.To watch the

stored Antenna channels or the stored Cable

channels, you will have to switch between Antenna

or Cable in the Channel installation > Antenna or

Cable menu.

Step 4: Install TV and radio channels

Your TV will search for and store all available digital

and analogue TV channels and all available digital

radio channels.

If you selected Cable in Step 3, a Settings menu is

available. Leave these settings unchanged unless

your provider supplied specific values to use for

Network frequency, Network ID or Symbol rate.

Follow the text on screen to change the settings.

Use the digit keys to enter the numbers.You can

also select to install analogue channels or not.

‡Select Start.

The installation may take a few minutes.

In case of Cable selection, the TV can ask to

enter the Network ID supplied by the cable

provider. Enter this ID with the digit keys.

®When the installation is done, press Finish to

return to the Channel installation menu.

ÒPress Menu Ï to quit the menu.

àTip

When digital channels are found, the list of installed

channels may show some empty channel numbers.

If you want to rename, reorder or uninstall stored

channels, see section 6.3 Rearrange channels.

Step 5 Clock, time zone and daylight saving

selection

Only available when the country selected supports

digital broadcasts.

Go to a next step if this step is not applicable.

‡Press œto select Clock.

®Press πto enter.

ÒPress oor œto select Auto clock mode.

†Press πto enter.

Auto clock mode

Select Automatic to instruct your TV to always get

the time correctly.Time zone and Daylight saving

correction are automatically set.

Select Manual when Universal Time Coordinated

(UTC) is not available in your area.

Time zone/Daylight saving

When you selected Auto clock mode manually,

select your local time zone and choose between

Standard (winter) and Daylight saving time

(summer).

In

s

t

a

ll

a

ti

on

C

loc

k

A

u

t

o

c

l

oc

k m

ode

Tim

e

z

o

n

e

Da

y

li

g

ht savin

g

...

C

onnections assist

.

Audio setu

p

R

e

n

a

m

e

de

vi

ces

D

ecoder

M

a

n. n

e

tw

o

rk in

s

t

.

C

loc

k

Factor

y

settin

g

s

Channel installation 31

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 31

Downloaded From TV-Manual.com Manuals

Channel installation

6.2 Analogue: Manual installation

You can tune-in analogue TV channels channel by

channel manually with Manual installation.

6.2.1 Select the system

‡Press Menu Ïand select Setup > Installation

> Channel installation > Analogue: Manual

installation.

®Press πto enter the Manual installation menu.

System is highlighted.

ÒPress πto enter the System list.

†Press oor œto select your country or part

of the world where you are now located.

ºPress pto return to the Manual installation

menu.

6.2.2 Search for and store a new channel

‡Press Menu Ïand select Setup > Installation

> Channel installation > Analogue: manual

installation > Search.

®Press πto enter the Search menu.

ÒPress the red key to enter the frequency

yourself or press the green key to search for a

next channel.

àTip

If you know the frequency, enter the three numbers

of the frequency with the number keys of the

remote control.

†Press pwhen the new channel has been

found.

ºSelect Store as new channel to store the new

channel under a new channel number.

◊Press πto enter.

‹Press OK.

Done appears.

≈Press Menu Ïto quit the channel installation

menu.

6.2.3 Fine tune a channel

Fine tune a found channel when the reception is

poor.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Analogue: manual

installation > Fine tune.

®Press πto enter the Fine tune menu.

ÒPress oor œto adjust the frequency

†Press p when you finished fine tuning.

ºSelect Store current channel to store the fine

tuned channel under the current channel

number.

◊Press πto enter.

‹Press OK.

Done appears.

≈Press Menu Ïto quit the Channel installation

menu.

6.3 Rearrange stored channels

To rename, reorder, uninstall or reinstall stored

channels.

6.3.1 Rename a channel

Assign or change a channel name to a channel for

which a name has not yet been entered.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Rearrange.

®Press π to enter the channel list.

ÒPress oor œin the channel list to select the

channel you want to rename.

†Press the red key.

ºPress por πto select a character or oor œto

change the characters. Space, numbers and other

special characters are located between zand A.

◊Press the green key or OK to finish.

àTip

To delete all characters, press the yellow key.

To delete the highlighted characters, press the blue

key..

6.3.2 Uninstall or reinstall a channel

To uninstall a stored channel so that it is no longer

possible to tune to.

Reinstall an earlier uninstalled channel.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Rearrange.

®Press π to enter the channel list.

C

hannel install..

.

Analo

g

ue: Manual..

.

S

y

ste

m

Searc

h

Fin

e

t

u

n

e

Store as new ch..

.

A

u

t

o

m

a

ti

c

in

s

t

a

ll..

.

Installation u

p

dat

e

Start-u

p

messa

ge

Rearran

ge

32

2705.3 EN 20-05-2008 10:03 Pagina 32

Downloaded From TV-Manual.com Manuals

ÒPress oor œin the channel list to select the

channel you want to uninstall or reinstall.

†Press the green key to uninstall or reinstall the

channel.

ºPress Menu Ïto quit the menu.

6.3.3 Reorder the channels

Change the order of the stored channels.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Rearrange.

®Press π to enter the channel list.

ÒPress oor œin the channel list to select the

channel you want to reorder.

†Press the yellow key to move up the highlighted

channel in your channel list.

ºPress the blue key to move down the

highlighted channel in your channel list.

◊Press Menu Ïto quit the menu.

6.4 Channel management

6.4.1 Automatic search

Once a day, at 3 AM, the TV searches for all

available TV channels automatically. Leave your TV in

standby.

Earlier found channels are updated and new

channels are stored. Channels not found by the

search anymore are removed from the channel list.

When Channel management has found or removed

channels, a message at TV start up is shown.You

can activate or deactivate this message.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Startup message.

®Select On or Off.

6.4.2 Manual search

You can install the updates at any time.

‡Press Menu Ïand select Setup > Installation

> Channel installation > Installation update.

®Press π to enter the Installation update menu.

ÒPress OK.

†Press the green key to start.

The update starts and may take a few minutes.

ºWhen the update is completed, press the red

key to return to the Channel installation menu.

◊Press Menu Ïto quit the menu.

6.5 Digital reception test

If you receive Digital TV broadcasting you can verify

the quality and signal strength of a specific channel.

‡Select a channel.

®Press Menu.

ÒSelect Setup > Installation > Channel

installation > Digital:Test reception.

†Press πto enter

ºPress OK.

◊Press the green key to start the test.

Information on the quality and the signal

strength of this channel is shown.

‹Use the cursor keys to change the frequency to

improve the signal or enter a new frequency

directly with the digit keys.

≈Press the green key to store the frequency if

the signal quality and strength are good.

ÚPress the red key to return to the Channel

installation menu.

œPress Menu to quit the menu.

àTip

To achieve the best results, contact a specialised

antenna installer.

6.6 Factory settings

You might want to return to the original factory

settings. Only picture, sound and Ambilight settings

will be reset.

‡Press Menu Ïand select Setup > Installation

> Factory settings.

®Press π to enter the Factory settings menu.

ÒPress OK.

†Press Menu Ïto quit the menu.

Channel installation 33

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 33

Downloaded From TV-Manual.com Manuals

Connections34

7Connections

7.1 Connection overview Side connectors

1Headphones

Stereo Mini jack

2Audio L/R

Audio L/R input to be used together with Video

or S-Video on the side of the TV.

3Video

Video input to be used together with the

Audio L/R on the side of the TV.

4S-Video

S-Video input to be used together with the

Audio L/R on the side of the TV.

5USB

USB connector.

6HDMI Side

HDMI input

7Common interface

Slot for Conditional Access Modules (CAM)

Back connectors

8EXT1, EXT2

Scart connectors for DVD,VCR, Digital receiver,

Game console, etc.

9EXT3

Component Video Y Pb Pr and Audio L/R

connectors for DVD, Digital receiver or Game

console, etc.

VGA and Audio L/R connectors for a PC.

10 Service UART

For service only.

11 Digital Audio Out

Sound output cinch connector for a Home

Theatre System, etc.

12 Audio Out L/R

Sound output cinch connectors for a Home

Theatre System, etc.

13 Antenna input

14 Network

Home network connector.

15 HDMI 1, HDMI 2, HDMI 3

HDMI input connectors for Blu-ray Disc player,

HD Digital receiver or HD Game console, etc.

16 Audio L/R In [DVI to HDMI]

Audio In L/R connectors to be used together

with a DVI to HDMI connection.

2705.3 EN 20-05-2008 10:03 Pagina 34

Downloaded From TV-Manual.com Manuals

7.2 About connections

7.2.1 What you need to know

Connect your device with the highest possible

quality connection.

Look for the highest quality connection on your

device. Use that connection to your TV.

HDMI - Highest quality ★★★★★

An HDMI connection has the best picture and

sound quality. One cable combines video and audio

signals. Use HDMI for HD ( High Definition) TV

signals. HDMI with EasyLink offers easy operating

of your connected devices when these have the

HDMI CEC standard. See section 7.2.2 EasyLink

A device connected with HDMI to the TV can only

send out audio and video signals to your TV.The

device cannot receive or record audio and video

from your TV.

HDMI cable (max. 5m)

àTip

DVI to HDMI – Higher quality ★★★★

Use a DVI to HDMI adaptor if your device has only

a DVI connection.

Connect an Audio L/R cable to Audio In L/R (DVI

to HDMI) for sound.

Assign this Audio In to the HDMI 1, 2 or 3 where

the device is connected. See section 7.5.2 Audio

setup (if present).

rNote

HDMI supports HDCP (High-bandwidth Digital

Contents Protection). HDCP is a copy protection

signal that comes with HD content (DVD disc or

Blu-ray Disc).

YPbPr – Higher quality ★★★★

Use the Component Video YPbPr connections

together with Audio Left and Right. Match the cable

colours when you connect.

YPbPr can handle HD TV signals.

Component Video Audio L/R cable

YPbPr cable - Red, White

- Red, Green, Blue

Scart - Good quality ★★★

One cable combines video and audio signals.

Scart connectors can handle RGB video but no HD

TV signals.

Scart cable

S-Video - Good quality ★★

Use an S-Video cable together with an Audio L/R

(cinch) cable. Match the cable colours when you

connect.

An S-Video cable Audio L/R cable

- Red, White

Connections 35

ENGLISH

2705.3 EN 20-05-2008 10:03 Pagina 35

Downloaded From TV-Manual.com Manuals

Connections

Video - Basic quality ★

Use a Video (cinch) cable together with an Audio

L/R (cinch) cable. Match the cable colours when

you connect.

Combined Video - yellow and Audio L/R cable

- red and white

7.2.2 HDMI with EasyLink

Connected devices that are compliant with the

HDMI CEC standard can work together.

‡Press Menu Ï> Setup > Installation >

Preferences and press πto enter the list.

®Press oor œto select EasyLink.

ÒPress πto enter.

†Press oor œto select On or Off.

ºSelect On to activate EasyLink.

EasyLink might not work with devices from other

brands.

One touch play

Insert a DVD disc and press Play.The TV switches

on from standby and shows the DVD programme

automatically.

System standby

Press the Bkey on the remote control for more

than 2 seconds to switch the connected devices in

standby.

System audio control

When you connect an audio system you can listen

to the sound from your TV through your audio

system while the TV speakers are muted. See

section 5.4.5 Sound settings,TV speakers.

rNote

Ensure that all HDMI-CEC features in the HDMI-

CEC devices (for ex. Home Theatre System) are

properly set up.

7.2.3 Display synchronised audio out

For the best match of image and sound in speech

on screen, connect a Home Theatre System to

Audio Out L/R or Digital Audio outputs. See

diagrams 7.4.4 and 7.4.8.

Do not connect the audio signal of a DVD player,

digital receiver or other audio/video device directly

to the Home Theatre System.

7.3 Connect with the

Connection assistant

(if available)

Use the Connection assistant to show you how to

connect your devices to your TV. It sets all

necessary settings automatically.

You can also connect your devices without the use

of the Connection assistant. See section 7.4

Connect without the Connection assistant.

‡Press Menu Ïon the remote control and

select Setup > Installation > Connection

assistant.

®Press πto start the Connection assistant.

ÒPress OK.

7.4 Connect without the

Connection assistant

The connections shown in this section are

recommendations for the most used cases. Other

solutions are possible.

When a device is connected the TV needs to know

what connection you made. See section 7.5

Connection setup.

36

2705.3 EN 20-05-2008 10:03 Pagina 36

Downloaded From TV-Manual.com Manuals

7.4.1 DVD player

Use a scart cable to connect the device to the

EXT1 input at the back of the TV.

7.4.2 DVD Recorder or Digital Receiver

Use a scart cable and 2 antenna cables.

7.4.3 DVD Recorder and Digital Receiver

Use 3 scart cables and 3 antenna cables.

Connections 37

ENGLISH

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/ YPb Pr AUDIO

VGA +

YPbPr

Receiver / Cable boxDVD Recorder

IN

OUT

IN

OUT

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/YPbPr AUDIO

VGA +

YPbPr

DVD Player

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/YPbPr AUDIO

VGA +

YPbPr

DVD Recorder / Digital receiver

IN

OUT

2705.3 EN 20-05-2008 10:03 Pagina 37

Downloaded From TV-Manual.com Manuals

Connections

7.4.4 DVD Recorder and Home Theatre

System

Use a scart cable, 2 antenna cables and 1 digital

audio (cinch) cable.

7.4.5 DVD Recorder and DVD Home

Theatre System

Use 2 scart cables, 2 antenna cables and 1 digital

audio (cinch) cable.

7.4.6 Satellite receiver

Use a scart cable and 2 antenna cables.

38

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/YPbPr AUDIO

VGA +

YPbPr

Home Theatre SystemDVD Recorder

DIGITAL

AUDIO

IN

OUTIN

DIGITAL

AUDIO

OUT

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/ YPb Pr AUDIO

VGA +

YPbPr

Satellite receiver

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/ YPb Pr AUDIO

VGA +

YPbPr

DVD Home Theatre SystemDVD Recorder

DIGITAL

AUDIO

IN

OUTIN

DIGITAL

AUDIO

OUT

2705.3 EN 20-05-2008 10:03 Pagina 38

Downloaded From TV-Manual.com Manuals

Connections

7.4.7 HD Digital receiver / HD satellite

receiver

Use an HDMI cable and 2 antenna cables.

7.4.8 DVD-R, Home Theatre System and

Digital receiver

Use 3 scart cables, 3 antenna cables and 1 audio

(cinch) cable.

7.4.9 Blu-ray Disc player

Use an HDMI cable.

39

ENGLISH

LR

HDMI 1HDMI 2HDMI 3

AUDIO

HDMI

[]

DVI

NETWORK

IN

Blu-ray Disc player

OUT

HDMI

LR

HDMI 1HDMI 2HDMI 3

AUDIO

HDMI

[]

DVI

NETWORK

IN OUT

HD Digital receiver / HD Satellite receiver

IN

OUT

HDMI

EXT 3 VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/YPbPr AUDIO

VGA +

YPbPr

Home Theatre SystemDigital ReceiverDVD Recorder

DIGITAL

AUDIO

IN

IN

OUT

IN

OUT

DIGITAL

AUDIO

OUT

2705.3 EN 20-05-2008 10:03 Pagina 39

Downloaded From TV-Manual.com Manuals

Connections

7.4.10 Game console

The most practical connections for a game console

are at the side of the TV.

Connected at the side of the TV

Use the HDMI connection or the S-Video and

Audio L/R connections or the Video and Audio L/R

connections.

Connected at the back of the TV

Use an HDMI connection or the EXT3-YPbPr and

Audio L/R connections for HD quality

7.4.11 Camcorder

The most practical connection for a camcorder is at

the side of the TV.

Connected at the side of the TV

Use the HDMI connection or the Video and Audio

L/R connections or use the S-Video and Audio L/R

connections.

Connected at the back of the TV

Use an HDMI connection or the EXT3-YPbPr and

Audio L/R connections for HD quality.

40

EXT 3 VGA

YPb

Pr

L

R

VGA/ YPb Pr AUDIO

VGA +

YPbPr

HDMI 1HDMI 2HDMI 3

EXT 3 VGA

YPb

Pr

L

R

VGA/YPbPr AUDIO

VGA +

YPbPr

HDMI 1HDMI 2HDMI 3

2705.3 EN 20-05-2008 10:03 Pagina 40

Downloaded From TV-Manual.com Manuals

Connections

7.4.12 Personal Computer

You can connect your PC directly to the TV.

The TV works as a monitor of your PC.

For more features you can connect your PC in a

PC network. See section 7.7 PC network.

As a monitor the PC can be connected at the side

with a DVI to HDMI adaptor or with a PC to TV

cable. Alternatively you can connect the PC at the

back with the VGA connection.

çCaution

Before connecting the PC, set the PC monitor

refresh rate to 60Hz.

àTip

Set the TV picture format to Unscaled in the

Picture format menu for maximal PC picture

sharpness. See section 5.4.4 Widescreen picture

format.

DVI to HDMI connection

Use a DVI to HDMI adaptor to connect to the

HDMI side connection.

Connect the Audio L/R at the side for sound.

PC to TV connection

Use a PC-TV out cable to S-Video and Audio L/R

cable to connect to the side of the TV.

VGA connection

Use a VGA cable to connect the PC to the EXT3

connection at the back of the TV.

Connect the Audio L/R to the EXT3 Audio L/R.

For supported PC monitor resolutions, see section

8 Technical data.

41

ENGLISH

DVI-HDMI

AUDIO L/R

HDMI

AUDIO L/R

AUDIO L/R

S-VIDEO

S-VIDEO

AUDIO L/R

EXT 3 VGA

b

Pr

L

R

VGA/YPbPr AUDIO

VGA +

YPbPr

VGA

AUDIO L/R

VGA

AUDIO L/R

2705.3 EN 20-05-2008 10:03 Pagina 41

Downloaded From TV-Manual.com Manuals

Connections

7.5 Connection setup

The TV needs to know what connections you have

made and which device is connected to which

connector.

If you have used the Connection assistant the

connection setup is already done.

7.5.1 Naming your devices

Name the connected devices for easy selection and

best signal handling.

Assign the type of device (DVD,VCR, Game, ...) to

the connector you use for that device.

‡Press Menu Ïon the remote control and

select Setup > Installation> Rename devices.

®Press πto enter the list.

ÒPress oor œto select the connector you

used for the device you connected.

†Press π.

ºPress oor œto select the type of device.

◊Press Menu Ïto quit the menu.

7.5.2 Audio setup (if present)

If you use the Audio In L/R (DVI to HDMI)

connector for a device connected to HDMI at the

back of the TV, assign this Audio In to the HMDI 1,

2 or 3 where the device is connected.

‡Press Menu Ïon the remote control and

select Setup > Installation > Audio setup.

®Press πtwice.

ÒPress oor œto select the HDMI connection

to link with this Audio In.

7.5.3 Decoder channels

Decoders that decode an antenna channel are

connected to EXT1 or EXT2 (scart).

You have to assign the TV channel as a channel to

be decoded.Then assign the connection where the

decoder is connected

‡Press Menu Ïon the remote control and

select Setup > Installation > Decoder >

Channel.

®Press πto enter the list.

ÒPress oor œto select the channel to decode.

†Press pand go back to select Status.

ºPress oor œto select the connector used by

the decoder.

◊Press Menu Ïto quit the menu.

In

s

t

a

ll

a

ti

on

D

ecoder

C

hanne

l

Status

...

C

onnections assist

.

Audio setu

p

R

e

n

a

m

e

de

vi

ces

D

ecoder

M

a

n. n

e

tw

o

rk in

s

t

.

C

loc

k

Factor

y

settin

g

s

Audio setu

p

Audio in L

/R

N

o

n

e

HDMI 1

HDMI 2

HDMI

3

Audio in L

/R

42

2705.3 EN 20-05-2008 10:03 Pagina 42

Downloaded From TV-Manual.com Manuals

Connections

7.6 Preparing for digital

services

Scrambled digital TV channels can be decoded with

a Conditional Access Module (CAM) and a Smart

card provided by a digital TV service operator.The

CAM may enable several services depending on the

operator you choose (e.g. Pay TV).

Contact your digital TV service operator for more

information and terms.

7.6.1 Insert a Conditional Access Module -

CAM

)Warning

Switch off the TV before inserting the CAM.

Look on the CAM for the correct inserting

direction. Incorrect insertion can damage the CAM

and the TV.

‡Gently insert the CAM into the Common

Interface slot at the side of your TV as far as it

will go.

®Leave the CAM in the Common Interface slot

permanently.

It can take a few minutes before a CAM is

activated. Removing the CAM will deactivate the

digital TV service.

7.6.2 Common interface menu

From this menu you access the CAM service you

have installed.The applications and their function,

the content and the messages on screen come

from the CAM service provider.

‡Press Menu Ïon the remote control and

select Features > Common interface.

This menu option is available when a CAM is

inserted and has made contact with the provider.

43

ENGLISH

COMMON INTERFACE

2705.3 EN 20-05-2008 10:03 Pagina 43

Downloaded From TV-Manual.com Manuals

Connections

7.7 PC network

You can link up your TV on a PC network in your

home.Watch your photos and listen to your music

from any linked PC on the TV.The PC network

feature of this TV is DLNA certified.

You can use Microsoft Windows XP or Vista, Intel

Mac OSX or Linux.

An example of a home PC network.

7.7.1 What you need

To set up your TV in a home PC network you

need:

•a router and a computer in a home network

•a network cable

•recent media server software (Windows, media

Player 11 or similar) on your computer.

For a complete list of compatible media server

software see section 8 Technical data.

7.7.2 Set up a PC network connection

On the TV no special settings are necessary to

connect automatically to the network.

‡Connect the network cable from your router to

the Network connector at the back of the

TV.

®Switch on the router. Set the router to DHCP

On.

ÒSwitch on the computer and start the media

server software.

†Some media server software needs a setting to

share your files with the TV.

In the media server this TV will present itself as

a number - a MAC or IP number.

Have the TV and router switched on for this

number to appear in the media server.

Select the TV number in the media server and

set the server to share files with this number.

For media server software marked with an * in

sections 8 Technical data,a step by step setting

instruction is available. See section 7.7.4 Media

server settings.

A firewall, a security system on your computer,

could also block the network connection.

Allow the media server software to go to the

network.

ºPress the Source vkey on the remote

control.

◊Select PC network and press π.

It could take some time for the TV to connect.

‹Use the colour and navigation/rotation keys to

browse your folders or play your files.

If the TV cannot connect to the network, study the

server software, router or PC manuals.

7.7.3 Manual network setup

Some expert network settings can be set on the

TV.The DHCP is set to On to automatically

connect to the network.

Press Menu Ï> Setup > Installation > Manual

network installation.

44

LR

HDMI 1 HDMI 2 HDMI 3

AUDIO

HDMI

[]

DVI

NETWORK

IN

2705.3 EN 20-05-2008 10:03 Pagina 44

Downloaded From TV-Manual.com Manuals

Connections 45

ENGLISH

7.7.4 Media server settings

Media servers need to be set for sharing their files

and folders. Follow the instructions closely to set

your specific server.

Windows Media Player v11on Windows Vista

Set for network sharing

In Windows Media Player select Library from the

menu and select Media sharing.

In the Media Sharing window, check the Share my

media box. Click OK.

If no network connection was found, and you are

unable to check this box, click the Networking

button to show the Network and Sharing Center

window, …

Set Network discovery to On.Set File sharing to

On.Go back to the Media Sharing window in

Windows Media Player and check the Share my

media box. Click OK.

When the TV is connected, by the router, to the

PC and everything is switched On, the Media

sharing window will show the TV as an Unkown

Device.Select the device and click Allow.

You can open the Settings window to change

particular settings on sharing.

When the device icon (the TV) is checked with a

green tick, click OK.

Set folders for sharing

In Windows Media Player select Library from the

menu and select Add to Library.

In the Add To Library window, select My folders

and those of others that I can access and click

the Advanced Options button. …

1

2

12

1

2

2705.3 EN 20-05-2008 10:03 Pagina 45

Downloaded From TV-Manual.com Manuals

With Advanced Options open, you can add

specific folders to the list to share. Click Add.

In the Add Folder window select a folder with

music, photos or videos you want to share with

other devices (your TV). Click OK.

In the Add To Library window the newly added

folder is shown.You can add more folders to

share. Click the OK button to add the files to the

library.

Now everything is set to enjoy music, photos and

videos on your TV.

Windows Media Player v11 on Windows XP

Set for network sharing

In Windows Media Player select Library from the

menu and select Media sharing …

46 Connections

1

2

1

1

2

2705.3 EN 20-05-2008 10:03 Pagina 46

Downloaded From TV-Manual.com Manuals

In the Media Sharing window, check the Share my

media box.

When the TV is connected, by the router, to the

PC and everything is switched On, the Media

sharing window will show the TV as an Unkown

Device.Select the device and click Allow.

You can open the Settings window to change

particular settings on sharing.

When the device icon (the TV) is checked with a

green tick, click OK.

Set folders for sharing

In Windows Media Player select Library from the

menu and select Add to Library.

In the Add To Library window, select My folders

and those of others that I can access and click

the Advanced Options button.

With Advanced Options open, you can add

specific folders to the list to share. Click Add.

In the Add Folder window select a folder with

music, photos or videos you want to share with

other devices (your TV). Click OK.

In the Add To Library window the newly added

folder is shown.You can add more folders to

share. Click the OK button to add the files to the

library.

Connections 47

ENGLISH

1

2

3

1

2705.3 EN 20-05-2008 10:03 Pagina 47

Downloaded From TV-Manual.com Manuals

Now everything is set to enjoy music, photos and

videos on your TV.

TVersity v.0.9.10.3 on Windows XP

Set for network sharing

Click the Settings tab and click the Start Sharing

button.

A pop-up window tells you that the media

server service is started. Click OK.

Click the Sharing tab.

Set folders for sharing

Click the green plus icon and select Add folder…

In the Add media pop-up window, click the

Browse button.

In the Browse for Folder window select a folder

with music, photos or videos you want to share.

Click OK.

Now everything is set to enjoy music, photos and

videos on your TV.

48 Connections

1

2

1

1

2

1

2705.3 EN 20-05-2008 10:03 Pagina 48

Downloaded From TV-Manual.com Manuals

Tw onky Media v4.4.2 on Macintosh OS X

Set for network sharing

In Tw onky Media click Basic Setup > First steps.

In this window you can change the server name

that appears on your TV.

Click Basic Setup > Clients/Security.

Check the box next to Enable sharing for new

clients automatically.

Set folders for sharing

Click on Basic Setup > Sharing.

Some ‘Content Locations’might be set already

automatically.To add a folder (a content location)

to be shared on the network click the Browse

button.

In the blue frame click the hard disk name to

browse to a folder with music, photos or videos

you want to share with other devices (your TV).

Click Select to select the folder for sharing.

Now click Save Changes.

Then click Rescan content directories.

In some cases this might not make all files and

folders available.

Click Support > Troubleshooting and click

Rebuild database to make sure everything

works OK.This rebuilt might take a while.

Now everything is set to enjoy music, photos and

videos on your TV.

Connections 49

ENGLISH

2

1

1

2

2705.3 EN 20-05-2008 10:03 Pagina 49

Downloaded From TV-Manual.com Manuals

50 Technical data

8Technical data

Picture / Display

•Display type: LCD Full HD W-UXGA

•Panel resolution: 1920x1080p

•Perfect Pixel HD picture enhancement

•1080p 24/25/30/50/60Hz processing

•100 Hz Clear LCD (if present)

Supported display resolutions

•Computer formats

Resolution Refresh rate

640 x 480p 60Hz (VGA/HDMI)

600 x 800p 60Hz (VGA/HDMI)

1024 x 768p 60Hz (VGA/HDMI)

1280 x 768p 60Hz (VGA/HDMI)

1360 x 765p 60Hz (VGA/HDMI)

1360 x 768p 60Hz (VGA/HDMI)

1280 x 1024p 60Hz (HDMI)

1920 x 1080i 60Hz (HDMI)

1920 x1080p 60Hz (HDMI)

•Video formats

Resolution Refresh rate

480i 60Hz

480p 60Hz

576i 50Hz

576p 50Hz

720p 50Hz, 60Hz

1080i 50Hz, 60Hz

1080p 24Hz, 25Hz, 30Hz

1080p 50Hz, 60Hz

Tuner / Reception / Transmission

•Antenna input: 75ohm coaxial (IEC75)

•TV system: DVD COFDM 2K/8K,

(MPEG2, MPEG4 if available)

•Video playback: NTSC, SECAM, PAL

•DVD: DVB Terrestrial

(see selected countries on the TV typeplate)

Sound

•Sound system:

- Virtual Dolby Digital

- BBE

Multimedia

•Connections: USB

•Playback formats: MP3, Slideshow (.alb)

JPEG, MPEG1, MPEG2.

Supported media server software

•Windows Media Player 11 (on Microsoft

Windows XP* or Vista*)

•PacketVideo Twonky Media 4.4.2 (on PC* &

Intel Mac OSX*)

•Sony Vaio media server (on Microsoft Windows

XP or Vista)

•TVersity v.0.9.10.3 (on Windows XP*)

•Nero 8 - Nero MediaHome (on Microsoft

Windows XP)

•DiXiM (on Windows XP)

•Macrovision Network Media Server (on

Windows XP)

•Fuppes (on Linux)

•UShare (on Linix)

•Philips Media Manager (on Microsoft Windows

XP)

•Philips NAS SPD8020

*For this media server software a step by step

setting instruction is available in the online User

manual on www.philips.com/support.

Supported USB/Memory device formats

•FAT 16, FAT 32, NTFS.

Remote control

•Type: RC4492

RC4494 (42PFL9803)

•Batteries: 3 Size AAA-LR03-1,5V type

Connectivity

Back

•EXT1 (scart): Audio L/R, CVBS in, RGB

•EXT2 (scart): Audio L/R, CVBS in, RGB,

•EXT3:Y Pb Pr or VGA, Audio L/R

•HDMI 1 in (HDMI 1.3a for all HDMI

connections)

•HDMI 2 in

•HDMI 3 in

•Audio In L/R (DVI to HDMI)

•Audio Out L/R - display synchronised

•Digital Audio out (coaxial-cinch-S/PDIF) -

display synchronised

•Network - (RJ45)

Side

•HDMI side in

•S-Video in (Y/C)

•Video in (CVBS)

•Audio L/R in

•Headphone (stereo mini jack)

•USB

•Common interface slot

2705.3 EN 20-05-2008 10:03 Pagina 50

Downloaded From TV-Manual.com Manuals

Technical data 51

ENGLISH

Power

•Mains power: AC 220-240V (±10%)

•Power and standby power consumption:

See technical specification on www.philips.com

•Ambient temperature: 5°C - 35°C

Specifications are subject to change without notice.

For more specification details of this product see

www.philips.com/support.

Dimensions and weights (approx.)

TV model 32PFL9603D/H 37PFL9603D/H 42PFL9603D/H 47PFL9603D/H 52PFL9703D/H

42PFL9703D/H 47PFL9703D/H

42PFL9803H

- width 828mm 953mm 1054mm 1167mm 1300mm

- height 534mm 604mm 658mm 722mm 803mm

- depth 109mm 101mm 100mm 101mm 127,5mm

- weight ±19kg ± 25kg ± 28kg ± 35,5kg ± 45,5kg

TV + stand

- width 828mm 953mm 1054mm 1167mm 1300mm

- height 594mm 677mm 731mm 795mm 875mm

- depth 220mm 242mm 265mm 290mm 320mm

- weight ±20kg ± 28,5kg ± 32,5kg ± 40,5kg ± 49kg

2705.3 EN 20-05-2008 10:03 Pagina 51

32PFL9613D/H

Downloaded From TV-Manual.com Manuals

52 Troubleshooting

9Troubleshooting

Television and remote control

The TV does not switch on

•Verify the mains cord connection.

•Verify if the batteries of the remote control are not

empty or weak.Verify their + / - orientation.

You can use the keys on the TV to switch the TV on.

•Unplug the mains cord, wait a minute and plug it

back in.Try again to switch on.

The TV does not react on the remote control

•Verify if the batteries of the remote control are not

empty or weak.Verify their + / - orientation.

•Clean the remote control and TV sensor lens.

The TV switches off and the red light blinks

•Unplug the mains cord, wait a minute and plug it

back in.Verify if there is enough space for ventilation.

Wait until the TV has cooled down.When the TV

does not restart to standby and the blinking occurs

again, call our Customer Care.

You forgot your code to unlock Child lock

•See section 5.9.3 Set code / Change code.

Wrong language in the TV menu ?

Follow these steps to change the language.

‡Press Menu Ïon the remote control.

®Use œto select the last menu line.

ÒPress πthree times.

†Press oor œto select your language.

ºPress OK.

◊Press Menu Ïto quit the menus.

TV channels

Some TV channels are gone

•Verify if the correct channel list is chosen.

•A channel could be uninstalled in the Rearrange

menu.

No digital channels found during installation

•Verify if the TV supports DVB-T or DVB-C in your

country. See the label “Digital TV Country

Compatibility” on the back of the TV.

Picture

LightGuide is on but there is no picture

•Verify if the antenna is connected properly.

•Verify if the correct device is selected.

The sound is on, but there is no picture

•Verify the contrast or brightness setting in the menu.

The TV picture is poor

•Verify if the antenna is connected properly.

•Non-earthed audio devices, neon lights, high

buildings or mountains can influence the picture

quality.Try to improve the picture by changing the

antenna direction or place devices away from the

TV.

•Verify if the correct TV system is chosen in the

Manual installation menu.

•If only a certain channel is poor, try to fine tune this

channel in the Fine tune menu. See section 6.2.3.

The picture has poor colour

•Verify the colour settings in the Picture menu.

Select any of the Reset to standard settings in the

Smart settings menu. See section 5.4.1.

•Verify the connections and cables of the connected

devices.

The TV does not remember my settings when I

switch back on

•Verify if the TV is set to Home in the TV menu >

Setup > Installation > Preferences > Location

menu.

The picture does not fit the screen, it is too big or

too small

•Select a more fitting picture format in the Picture

format menu.

See section 5.4.4 Widescreen picture format.

•Name your connected device in the Connections

menu to obtain the best signal handling.

See section 7.4.1 Naming your devices.

The picture position on screen is not correct

•Some picture signals from some devices do not fit

the screen correctly.You can shift the picture with

the navigation key on the remote control.Verify the

signal output of the device.

Sound

There is a picture but no sound

•Verify the volume is not set to 0.

2705.3 EN 20-05-2008 10:03 Pagina 52

Downloaded From TV-Manual.com Manuals

Troubleshooting 53

ENGLISH

•Verify the sound has not been muted with the ¬

key.

•Verify if all cables are connected properly.

•If no sound signal is detected, the TV automatically

switches off the sound.

This is proper operation and is not a malfunction.

The sound is poor

•Verify if the sound is set to Stereo.

•Verify the Equalizer in the Sound menu.

•Select any of the Smart settings in the menu.

The sound comes from one speaker only

•Verify if the Balance is not set to extreme left or

right.

Sound delay when A HTS-DVD device is connected

•See the user manual of the HTS-DVD device to

adjust the audio sync delay.

If you cannot set A delay, switch off HD Natural

MOtion in the Picture > Perfect Pixel HD menu.

See section 5.4.3 Picture settings.

HDMI connections

Trouble with devices connected with HDMI

•The HDMI - HDCP procedure might take a few

seconds before the TV shows the picture from a

device.

•If the TV does not recognise the device and the

screen shows no picture, try switching from one

device to another and back again to restart the

HDCP procedure.

•If sound interruptions occur persistently, see the user

manual of the device to verify the output settings. If

that does not help, connect an additional audio

cable.

•If a DVI to HDMI adaptor is used, verify if an

additional audio connection is in place to complete

the DVI connection.

•HDMI with EasyLink does not work

-Verify if the connected device supports the HDMI

CEC standard. See the user manual that comes

with the device.

-Verify if the HDMI cable is properly connected.

-Verify if Easylink is activated in the Setup,

Installation, Preferences menu.

-Ensure that the System audio control in your

HDMI CEC audio devices is properly set up. See

the user manual that comes with your audio

device.

USB connection

The TV does not show the USB device content

•Set your device (camera) to ‘Mass Storage Class’

compliant.

•The USB device may need specific driver software.

Unfortunately this software cannot be downloaded

to your TV.

I cannot see my files in the Multimedia menu.

•Not all audio and picture files are supported. See

section 8 Technical data.

Photo and music files do not playback smoothly

•The transfer performance of the USB device limits

the transfer rate.

Personal computer

The PC display on my TV is not stable or is not

synchronised

•Verify if the correct resolution mode is selected on

your PC. See section 8 Technical data.

I cannot find my PC files on my PC

•Verify if files have been added in the folder.

•Not all file formats are supported. See section 8

Technical data.

PC files are not shown in the PC network menu

•You have to set the PC media server to share files

with the TV. See section 7.7.2 Set up a PC network

connection.

PC files do not play

•See section 8 Technical data for supported file

formats.

If your problem is not solved

Switch your TV off and on again, that may help. If not,

call our Consumer Care or consult our website

www.philips.com/support.

Find the Consumer Care telephone numbers on the

back cover of this manual.

Please, have the TV Model and Product Number

ready before you call.

You can find these numbers on the packaging label or

on the typelabel on the back and bottom of the TV.

)Warning

Never try to repair the TV yourself.

2705.3 EN 20-05-2008 10:03 Pagina 53

Downloaded From TV-Manual.com Manuals

54 Index

10 Index

100 Hz Clear LCD 5,17

Active control 17

Advanced sharpness 17

Ambilight

active mode 19

LoungeLight 11

menu / settings 19

modes 19

Analogue

manual installation 31

TV channels 31

Antenna

cable 7

connect 7

with devices 34

Audio setup 42

Auto clock mode 31

Auto format 18

Automatic installation 30

Auto surround 19

Auto Volume levelling 19

Balance

sound 19

Batteries 3,7

Blacklevel 17

Blu-ray Disc 39

Brightness 17

ambilight 19

CA module 43

Cable

HDMI 35

Scart 35

S-Video 35

Video 36

YPbPr 35

Camcorder 40

Camera (photo) 40

Care of the screen 3

Change code 24

Channel

all channels list 21

favourite list 21

installation 30

lock 24

Channel

management 32

up/down 13

previous 13

rearrange 32

store / install 31

Child lock 24

Clock 13,31

Code 24

Colour

enhancement 17

menu 17

keys 4,12

Common interface (CAM)

menu 43

slot 34,43

Connection

best 35

overview 34

set up 42

Contrast 17

Country selection 30

Custom lock 24

Custom tint 17

Daylight saving 31

Decoder channel 42

Delta volume 19

Device

connecting 36

naming 42

watch 9

DHCP 44

Digital

audio out 34

subtitle language 25

receiver 37

text services 21

test reception 33

Dual I/II 19

Dual screen 13

DVB-T 5

DVD

connect 37

playback 10

player 37

recorder 37,38

Dynamic

backlight 17

contrast 17

EasyLink 36

Electronic Programme Guide 22

Energy saving 16

Equalizer 18

External 1,2,3 (EXT) 34

Factory settings 33

Favourite channel lists 21

Fine tune 32

Game console 40

HDCP 35

HDMI connection 35

HD digital receiver 39

HD natural motion 17

Headphone

connect 4,34

volume 19

Hearing impaired 30

Home theatre system 38

Hue 17

Installation

automatic 30

manual 31

manual network setup 44

menu 30

update 32

Kensington Security Slot 5

Key(s)

colour 12

on TV 4

on remote control 4,12

Language

menu 30

audio 19

L

K

I

H

G

F

E

D

C

B

A

2705.3 EN 20-05-2008 10:03 Pagina 54

Downloaded From TV-Manual.com Manuals

Index 55

ENGLISH

Language

subtitle 25

LightGuide 15

Light sensor 17

Location 47

Locks 24

LoungeLight 11

Menu key 13

Mono 19

Movie expand 18

MPEG artefact reduction 17

Music 25

Mute key 12

Naming devices 42

Network setup 44

Noise reduction 17

OK key 12

On timer 24

Perfect Pixel HD 17

Personal Computer

connect 41

display resolutions 50

Photo viewer 26

Picture

album 26

format 18

menu 17

Position the TV 5

Power cable 7

Preferred audio format 30

Radio channel 27

Rearrange channels 32

Recorder 37

Recycling 3

Remote control

assistant 13

batteries 7

mode 13

overview 12

setup code 16

Remote control

universal 13

Rename 32

Reorder 32

Safety 3

Satellite receiver 38

Scart connection 35

Screen cleaning 3

Search

channels 31

teletext pages 20

Set code 24

Settings assistant 16

Sharpness 17

Sleeptimer 24

Smart settings 16

Software update 28

Sound

menu 18

surround mode 19

Standby 12,24

Super zoom 18

Stationary images 3

Stereo 19

Subtitle 25

language 25

shift 18

Switch on 8

Table of Pages T.O.P 20

Technical data 50

Teletext 20

digital 21

dual screen 20

language 20

menu 21

page 20

teletext 2.5 21

Time zone 31

Timers 24

Tint 17

Troubleshooting 52

TV speakers 19

Universal mode 13

Universal remote control 13

Unmount the stand 6

Unscaled 18

USB

connector 34

device 25

photo viewer 25

VCR

connect 37

VGA 41

Video cable 36

Video formats 50

Visual impaired 30

Volume

bar 18

key 12

visual impaired 19

Whitepoint 17

Widescreen picture format 18

YPbPr 35

Y

W

V

U

T

S

R

P

O

N

M

2705.3 EN 20-05-2008 10:03 Pagina 55

Downloaded From TV-Manual.com Manuals

Information about how to

re-tune your TV during the

digital TV switchover.

K

e

e

p

t

hi

s

use

r m

a

n

ua

l

sa

f

e

-

y

ou'll need it

.

.........................................

Television in the UK is going digital, bringing us all

more choice and new services. Starting in late 2007

and ending in 2012, television services in the UK

will go completely digital, TV region by TV region.

Please see the next page to find out when your area

switches to digital.

Digital UK is the independent, non-profit organisa-

tion leading the process of digital TV switchover in

the UK. Digital UK provides impartial information on

what people need to do to prepare for the move to

digital, and when they need to do it.

How the switchover affects your

TV equipment:

Your new TV has a digital tuner built in, which

means it is ready to receive the Freeview signal by

simply plugging it into your aerial socket (check if

you can get digital TV through your aerial now, or

whether you'll have to wait until switchover, at

www.digitaluk.co.uk).

When the TV switchover happens in your area, there

are at least two occasions when you will need to

re-tuner your TV in order to continue receiving your

existing TV channels, and also to pick up new ones.

56

2705.3 EN 20-05-2008 10:03 Pagina 56

Downloaded From TV-Manual.com Manuals

57

ENGLISH

When does switchover ha

pp

en

?

*

Calls char

g

ed at BT rate of 3

p

p

r minute da

y

time an

d

1

p

p

er minute evenin

g

s and weekends. Rates ma

y

var

y

f

o

r

ca

ll

s

fr

o

m n

o

n-BT lin

es.

Visit us at digitaluk.co.uk

Ca

ll

us

o

n

08

4

5

6

50

50

50

*

* Co

p

eland switches on October 17, 200

7

The exact date

y

ou switch

depends on the transmitter

you are served by. To check

when you switch, go to

Digital UK's postcode

checker on

www.digitaluk.co.uk.

Check your ITV news service

or look at Teletext page 106

to see what TV region you're

in.

How to re-tune:

Digital UK, the body leading the digital TV switch-

over, will advise you when you need to re-tuner

during the switchover.

If you choose to connect your TV to satellite or

cable with a digital box then it will no be affected

by switchover, and you won't need to re-tune.

If you have any questions, please contact your

equipment supplier or call Digital UK on ...

0845 6 50 50 50 or visit www.digitaluk.co.uk

To find out how to re-tune your TV, check this user

manual for details.

Go to section 6.1 Automatic installation and go to

Step 4 Install TV and radio channels.

If you do not re-tune your channels when advised to

do so by Digital UK, you may lose some or all of`

your channels until you do re-tune. You should

re-tune your TV every few months to check for any

new channels.

If you are missing any channels, it may be that they

are not available in your area, or that your aerial

needs upgrading.

2705.3 EN 20-05-2008 10:03 Pagina 57

Downloaded From TV-Manual.com Manuals

2705.3 EN 20-05-2008 10:03 Pagina 58

Downloaded From TV-Manual.com Manuals

DVD Codes

PHILIPS 0000, 0001, 0002, 0003, 0013,

0021, 0030, 0049, 0100, 0105,

0107, 0111, 0123, 0127, 0131,

0135, 0145, 0150, 0153,

0154,0155, 0156, 0161, 0163,

0164, 0177, 0193, 0197, 0204,

0221, 0225, 0226, 0231, 0232,

0233, 0258, 0260, 0271, 0273,

0275, 0288, 0289, 0295, 0301,

0310, 0311, 0312, 0318, 0320,

0325, 0333, 0341, 0342, 0343,

0354, 0355

Aiwa 0028, 0109, 0140, 0171, 0303

Aika 0020

Akura 0066

Alba 0004, 0118, 0119, 0129, 0195, 0256

Apex 0040

Bang & Olufsen 0071

Best Buy 0062

Bosston 0056

Brandt 0049, 0115, 0132, 0191

Brittannia 0053

Bush 0004, 0032, 0050, 0052, 0060, 0064,

0119, 0120, 0134, 0141, 0147,

0183, 0185, 0189, 0256

Cambridge Audio 0055, 0070

CAT 0057, 0058

Celestial 0068

Centrex 0144

Centrum 0058

CGV 0055

Cinevision 0063

Classic 0034

Clatronic 0060

Conia 0050

Crypto 0065

C-Tech 0126

CyberHome 0108, 0124, 0137

Daewoo 0007, 0008, 0009, 0125, 0139,

0261, 0286

Dalton 0069

Dansai 0054, 0188

Daytek 0110, 0121

DEC 0060

Denon 0015, 0039, 0166, 0173, 0184

Denver0032, 0060, 0066, 0118, 0172, 0308

Denzel 0051

Desay 0059

Diamond 0055, 0126

Digitor 0067

DK Digital 0134, 0292

Dmtech 0005

Dual 0051

DVX 0126

Easy Home 0062

Eclipse 0055

Elta 0015, 0033, 0136

Eltax 0290

Emerson 0026

Enzer 0051

Finlux 0055

Fisher 0029

Gericom 0144

Global Solutions 0126

Global sphere 0126

Go Video 0018

Goldstar 0114

Goodmans 0004, 0060, 0064, 0119, 0144,

0147, 0169, 0179, 0187, 0236, 0256

Graetz 0051

Grundig 0021, 0031, 0139, 0144, 0148

H&B 0060, 0061

Haaz 0055, 0126

Harman/Kardon 0045

HiMAX0062

Hitachi 0018, 0037, 0051, 0062, 0196, 0209,

0284, 0302, 0317, 0330

Humax 0157

Innovation 0022, 0023, 0024, 0037

Jeutech 0056

JVC 0012, 0049, 0106, 0117, 0133, 0214,

0215, 0216, 0217, 0237, 0238,

0239, 0240, 0276, 0277, 0278,

0279, 0293, 0329, 0335

Kenwood 0015, 0043, 0138, 0181, 0186,

0300

Kingavon 0060

Kiss 0051, 0061

Koda 0060

KXD 0062

Lawson 0126

Lecson 0054

Lenco 0060

LG 0026, 0114, 0160, 0213, 0304,

0324, 0338, 0352, 0359

Life 0022, 0023, 0024

Lifetec 0022, 0023, 0024, 0037

Limit 0126

Loewe 0021, 0146, 0174

LogicLab 0126

Luxor 0144

Magnavox 0049, 0060, 0100

Magnum 0024, 0037

Marantz 0030, 0164, 0175, 0176

Matsui 0132, 0194

MBO 0046

Mediencom 0053

Medion0006, 0022, 0023, 0024, 0037, 0064

Metz 0055

MiCO 0055

Micromaxx 0022, 0023, 0024, 0037

Micromedia 0049

Micromega 0105, 0271

Microstar 0022, 0023, 0024, 0037

Mirror 0064

Mitsubishi 0017, 0101

Mizuda 0060, 0062

Monyka0051

Mustek 0034, 0256, 0296

Mx Onda 0055

1

DVD

DVD player

DVD recorder

DVD-R HDD

Blu-ray Disc

STB

Digital receiver

- DVB-T

Satellite receiver

- DVB-S

Cable receiver

- DVB-C

Remote control setup codes

Codeeinstellung in die Fernbedienung

Codes de la télécommande

Instelcodes voor de afstandsbediening

Codici per il telecomando

Códigos de acceso para el mando a distancia

Códigos de introdução no telecomando

¶›Ó·Î˜ Έ‰ÈÎÒÓ Î·Ù·¯ÒÚÈÛ˘ ÙËϯÂÈÚÈÛÙËÚ›Ô˘

HTS

Home Theatre Systems

Amplifier

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 1

Downloaded From TV-Manual.com Manuals

NAD 0044

Naiko 0144

Nakamichi 0048

Neufunk 0051

NU-TEC 0050

Omni 0053

Onkyo 0025, 0049, 0100, 0182

Optim 0054

Optimus 0019, 0103

Orava 0060

Orion 0185

Oritron 0024

P&B 0060

Pacific 0126

Palsonic 0052

Panasonic 0015, 0165, 0184, 0198, 0199,

0200, 0243, 0244, 0245,0246, 0247,

0248, 0249, 0250, 0251, 0252,

0253, 0254, 0266, 0267, 0274,

0291, 0294, 0313, 0314, 0315,

0319, 0336, 0347, 0348, 0349,

0356, 0358

Philips Magnavox 0013

Pioneer0019, 0103, 0112, 0113, 0116, 0128,

0149, 0159, 0180, 0201, 0202,

0203, 0206, 0207, 0208, 0242,

0255, 0263, 0305, 0321, 0326,

0327, 0328, 0337, 0344, 0345,

0346, 0353, 0357

Proline 0144, 0194

Provision 0060

Raite 0051

RCA 0035

REC 0052, 0053

RedStar 0066

Reoc 0126

Revoy 0061

Roadstar 0004, 0052, 0060

Rowa 0050, 0144

Rownsonic 0058

Saba 0115, 0132

Sabaki 0126

Sampo 0036

Samsung 0018, 0196, 0205, 0210, 0227,

0241, 0259, 0270, 0272, 0283,

0287, 0299, 0322, 0339, 0340

Sansui 0055, 0126

Sanyo 0257, 0262, 0285, 0298

ScanMagic 0256

Schneider 0004, 0005, 0006, 0024

Scott 0069, 0118

SEG 0004, 0042, 0051, 0126, 0152

Sharp 0022, 0044, 0130, 0151, 0268, 0280,

0350

Sherwood 0041

Shinco 0035

Sigmatek 0062

Silva 0066

Singer 0055, 0126

Skymaster 0033, 0034, 0126

Skyworth 0066

SM Electronic 0126

Sony 0014, 0104, 0109, 0122, 0171, 0178,

0192, 0222, 0223, 0224, 0228,

0229, 0230, 0282, 0297, 0306,

0309, 0316, 0323, 0351

Soundmaster 0126

Soundmax0126

Standard 0126

Star Cluster 0126

Starmedia 0060

Supervison 0126

Synn 0126

Tatung 0125

TCM 0022, 0023, 0024, 0037, 0072, 0073,

0074, 0075, 0076, 0077, 0078,

0079, 0080, 0081, 0082, 0083,

0084, 0085, 0086, 0087, 0088,

0089, 0090, 0091, 0092, 0134,

0210, 0269, 0272

Teac 0019, 0050, 0126, 0168

Te c 0066

Technics 0170, 0184

Telefunken 0058

Tevion 0022, 0023, 0024, 0037, 0069, 0126

Thomson 0010, 0011, 0093, 0094, 0095,

0096, 0097, 0098, 0099, 0102,

0115, 0162, 0167, 0191, 0331, 0332

Tokai 0051, 0066

Toshiba 0013, 0049, 0100, 0142, 0161, 0190,

0211, 0212, 0218, 0218, 0220,

0234, 0235, 0264, 0265, 0281

TruVision 0062

Vtrek 0065

Wharfedale 0027, 0055, 0126

Wintel 0056

Xbox 0102 ,0115

Xenon 0334

Xlogic 0126

XMS 0052

Yakumo 0144

Yamada0144

Yamaha 0015, 0038, 0131, 0143, 0158, 0184,

0271, 0307

STB Codes

PHILIPS 0000, 0001, 0003, 0020, 0043,

0066, 0068, 0069, 0073, 0085,

0087, 0095, 0097, 0098, 0105,

0109, 0113, 0114, 0117, 0122,

0124, 0174, 0176, 0184, 0187,

0206, 0207, 0208, 0211, 0213,

0281, 0282, 0285, 0297, 0298,

0301, 0304, 0325, 0331, 0358,

0360, 0361, 0386, 0387, 0393,

0395, 0412, 0421, 0429, 0434

ABC 0432

AB Sat 0100, 0122, 0123, 0132

AGS 0122

Akai 0043, 0105

Alba 0002, 0003, 0004, 0005, 0031, 0045,

0087, 0107, 0123, 0209, 0270

Alcatel 0430, 0431

Aldes 0004, 0005, 0006, 0072, 0107

Allsat 0007, 0025, 0042, 0061, 0068, 0105

Allsonic 0005, 0010, 0072, 0108, 0115

Alltech 0089, 0123

Alpha 0105

Altai 0078

Amitronica 0123

Ampere 0008, 0078, 0222

Amstrad 0044, 0071, 0078, 0090, 0092, 0096,

0101, 0106, 0123, 0127, 0128,

0155, 0222, 0225, 0274, 0275,

0278, 0317, 0388, 0405,

Amstrad 0435

Anglo 0123

Ankaro 0005, 0010, 0069, 0072, 0108, 0115,

0123

Anttron 0002, 0005, 0068, 0087

Apollo 0002

Arcon 0008, 0009, 0026, 0094, 0222, 0280,

0405

Armstrong 0105, 0225

ASA 0079

Asat 0043, 0105

ASLF 0123

AST 0014, 0074

Astacom 0095, 0122

Aston 0053, 0271

Astra 0012, 0013, 0037, 0064, 0076, 0082,

0119, 0123, 0225

Astro 0005, 0006, 0010, 0017, 0066, 0087,

0108, 0113, 0114, 0115, 0116,

0119, 0283, 0392

AudioTon 0005, 0025, 0087

Aurora 0126

Austar 0126, 0157

Avalon 0078

2

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 2

Downloaded From TV-Manual.com Manuals

Axiel 0122

Axis 0010, 0013, 0021, 0077, 0082, 0108,

0115, 0405

Barcom0009

Best 0009, 0010, 0108, 0115

Blaupunkt 0017, 0066, 0113

Blue Sky 0123, 0128

Boca 0037, 0059, 0085, 0091, 0123, 0222,

0225, 0237, 0242, 0251

Boston 0122, 0222

Brain Wave 0019, 0075, 0094

Brandt 0049, 0334, 0335, 0336

Broadcast 0018, 0076

Broco 0082, 0123

BSkyB 0101, 0155, 0183, 0216

BT 0122

BT Satellite 0049, 0095, 0277

Bubu Sat 0123

Bush 0003, 0007, 0020, 0031, 0045, 0061,

0068, 0107, 0200, 0207

BVV 0094

Cabletime 0406, 0407, 0408, 0424, 0426,

0428

Cambridge 0091, 0116

Canal Satellite 0073, 0109, 0114

Canal+ 0047, 0115

Channel Master 0004, 0107

Chaparral 0040

Cherokee 0122, 0132

Chess 0052, 0112, 0118, 0123, 0322

CityCom 0003, 0022, 0098, 0110, 0119,

0124, 0157

Clatronic 0019, 0075

Clemens Kamphus 0033

Clyde Cablevison 0409

CNT 0006

Colombia 0222

Columbia 0222

Columbus 0028

Comag 0222

Comcrypt 0433

Commander 0069

Commlink0005, 0072

Comtec 0021, 0072, 0077

Condor 0010, 0108, 0115, 0119

Connexions 0016, 0078, 0108, 0115, 0284

Conrad0084, 0085, 0108, 0110, 0115, 0116,

0119, 0222

Conrad Electronics 0119, 0123

Contec 0021, 0022, 0077, 0085

Cosat 0025

Crown 0225

Cryptovision 0410

Cybermax 0057

Daeryung 0016

Daewoo 0123, 0188

Dansat 0007, 0061, 0068

D-Box 0103

DDC 0004, 0107

Decca 0023

Delega 0004

Dew 0021, 0077

Diamond 0024

Digiality 0119

Digipro0129

Discoverer 0112, 0118

Discovery0122

Diseqc 0122

Diskxpress 0009, 0284

Distratel 0128

Distrisat 0105

Ditristrad 0025

DNR 0094

DNT 0016, 0043, 0078, 0105

Dong Woo 0036

Drake 0026, 0327

DStv 0126

Dune 0108, 0115

Dynasat 0121

Echostar 0016, 0052, 0078, 0102, 0109, 0123,

0132, 0279, 0286, 0287, 0288,

0294, 0342, 0343, 0344, 0345

Einhell 0002, 0005, 0071, 0072, 0116, 0123,

0222, 0225, 0275

Elap 0122, 0123

Elekta 0006

Elsat 0092, 0123

Elta 0002, 0010, 0025, 0043, 0105, 0108,

0115

Emanon 0002

Emme Esse 0010, 0020, 0033, 0102, 0108,

0115, 0121

Engel 0123

Ep Sat 0003

Eurieult 0111, 0127, 0128

Eurocrypt 0064

Eurodec 0055

Europa 0069, 0085, 0105, 0105, 0119

Europhon 0119, 0222

Eurosat0225

Eurosky 0010, 0108, 0110, 0115, 0116,

0119, 0222, 0225

Eurostar 0104, 0110, 0119, 0121, 0124,

0225

Eutelsat 0123

Eutra 0089

Exator 0002, 0005, 0087

Fenner 0112, 0115, 0118, 0123

Ferguson 0003, 0007, 0020, 0055, 0061,

0068, 0182, 0289, 0290, 0291, 0391

Fidelity 0071, 0090, 0116, 0275, 0405

Finlandia 0003, 0064

Filmnet 0433

Filmnet Cablecrypt 0411, 0427

Filmnet Comcrypt 0411

Finlux 0003, 0030, 0064, 0080, 0084, 0292,

0363, 0413

Finnsat 0021, 0055

Flair Mate 0123

Foxtel 0126, 0131, 0157, 0435

Fracarro 0045, 0102

France Satellite/TV 0028

France Telecom 0429, 0434

Freebox 0210

Freecom 0002, 0032, 0113, 0116

Freesat 0089, 0127

FTE 0008, 0034, 0085, 0091, 0108, 0277

FTEmaximal 0115, 0123

Fuba 0002, 0009, 0010, 0012, 0016, 0017,

0028, 0030, 0043, 0064, 0078,

0108, 0110, 0113, 0115, 0323

Fugionkyo 0129

Galaxi 0009

Galaxis 0005, 0010, 0013, 0021, 0025, 0031,

0050, 0072, 0077, 0082, 0108,

0110, 0115, 0126, 0157, 0293,

0295, 0346

Galaxisat 0074

Gardiner 0124

GEC 0409

General Instrument 0425, 0432

GMI 0225

Goldbox 0073, 0109, 0114

Goldstar 0032

Gooding 0117, 0412

Goodmans 0003, 0031, 0186, 0195

Granada 0064

Grandin 0062, 0111

Grothusen 0002, 0032

Grundig 0003, 0005, 0017, 0020, 0044,

0054, 0065, 0066, 0097, 0101,

0106, 0113, 0116, 0117, 0126,

0128, 0155, 0166, 0167, 0169,

0175, 0282, 0298, 0325, 0388,

0393, 0405, 0412

G-Sat 0068

Hanseatic 0039, 0086, 0118

Haensel & Gretel 0119, 0222

Hantor 0002, 0019, 0036, 0075

Hanuri 0006

Hase & Igel 0094

Hauppage 0179, 0198

Heliocom 0008, 0119

Helium 0119

Hinari 0004, 0068, 0107

3

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 3

Downloaded From TV-Manual.com Manuals

Hirschmann 0017, 0033, 0066, 0078, 0079,

0081, 0084, 0113, 0115, 0116,

0119, 0122, 0127, 0165, 0322,

0323, 0328, 0389, 0413

Hisawa 0019, 0075

Hitachi 0003, 0020, 0212, 0313

HNE 0222

Houston 0025, 0069

Humax 0157, 0161, 0163, 0190, 0215,

0217, 0296, 0346

Huth 0005, 0018, 0019, 0021, 0025, 0033,

0069, 0072, 0075, 0076, 0077,

0085, 0119, 0130, 0222, 0225, 0272

Hypson0111

ID Digital 0157

Imex 0111

Imperial 0031, 0045

Ingelen 0127

Innovation 0010, 0039, 0050, 0052, 0057,

0297, 0303, 0347, 0372

Inernational 0222

Interstar 0129

Intertronic 225

Intervision 0025, 0088, 0119

ITT/Nokia0003, 0020, 0064, 0079, 0084,

0103, 0284, 0313, 0323, 0413

Jerrold 0414, 0420, 0422, 0425, 0432

Johansson 0019, 0075

JOK 0093, 0095, 0122

JSR 0025

JVC 0117, 0186, 0412

Kamm 0123

Kathrein 0017, 0022, 0034, 0040, 0043, 0066,

0081, 0087, 0098, 0105, 0110,

0113, 0122, 0123, 0124, 0132,

0152, 0157, 0159, 0160, 0189,

0218, 0283, 0299, 0300, 0324,

0362, 0371, 0381, 0392, 0395

Kathrein Eurostar 0110

Key West 0222

Klap 0122

Konig 0119

Kosmos 0032, 0033, 0034, 0081

KR 0005, 0087, 0089

Kreiselmeyer 0017, 0066, 0113

K-SAT 0123

Kyostar 0002, 0087, 0222

L&S Electronic 0115, 0222

Lasat 0006, 0010, 0035, 0036, 0037, 0077,

0091, 0108, 0110, 0112, 0115,

0119, 0222, 0334, 0335, 0336

Lemon 0094

Lenco 0002, 0032, 0038, 0069, 0082, 0094,

0108, 0110, 0115, 0119, 0123, 0277

Leng 0019

Lennox 0025

Lenson 0029, 0116

Lexus 0105

LG 0032

Life 0050

Lifesat 0010, 0039, 0050, 0052, 0057, 0086,

0108, 0112, 0115, 0118, 0123,

0222, 0297, 0303, 0347, 0372

Lifetec 0010, 0039, 0050, 0052, 0057, 0297,

0303, 0347, 0372

Lorenzen 0069, 0094, 0096, 0119, 0222

Lorraine 0032

Lupus 0010, 0108, 0115

Luxor 0064, 0084, 0103, 0106, 0116, 0275,

0313, 0323, 0388

Lyonnaise 0055

M & B 0086, 0118

Macab 0055, 0434

Manata 0095, 0111, 0122, 0123, 0222

Manhattan 0003, 0006, 0020, 0025, 0095,

0122, 0269, 0383

Marantz 0043

Mascom 0006, 0081

Maspro0003, 0020, 0040, 0063, 0066, 0089,

0094, 0113, 0117, 0123, 0289,

0328, 0393, 0412

Matsui 0049, 0066, 0095, 0107, 0113, 0117,

0122, 0412

Max 0119

MB 0039, 0086, 0118

Mediabox 0073, 0109, 0114

Mediamarkt 0225

Mediasat 0013, 0073, 0082, 0109, 0114,

0116

Medion0010, 0039, 0050, 0052, 0057, 0108,

0115, 0123, 0222, 0297, 0303,

0335, 0347, 0372

Medison 0123

Mega 0043, 0105

Melectronic 0124

Metronic 0002, 0005, 0006, 0009, 0062,

0072, 0087, 0098, 0111, 0123,

0124, 0128, 0359, 0366, 0367,

0368, 0369, 0382

Metz 0017, 0066, 0113

Micro Electronic 0116, 0119, 0123

Micro Technology 0082, 0123

Micromaxx 0010, 0039, 0050, 0052, 0057,

0115, 0297, 0303, 0347, 0372

Microstar 0010, 0039, 0050, 0052, 0057,

0297, 0303, 0347, 0372

Microtec 0123

Minerva 0017, 0117, 0412

Mitsubishi 0003, 0017, 0049

Mitsumi 0037

Mnet 0427, 0433

Morgan Sydney 0056

Morgan’s 0037, 0043, 0085, 0091, 0105,

0123, 0222, 0225

Motorola 0125

Movie Time 0419

Mr Zapp 0434

Multichoice 0054, 0126, 0433

Multistar 0034, 0036

Multitec 0052, 0112, 0347

Muratto 0015, 0032, 0074

Mysat 0123

Navex 0019, 0075

NEC 0041, 0067, 0302

Network 0068

Neuhaus 0013, 0025, 0029, 0069, 0082,

0085, 0094, 0116, 0119, 0123

Neusat 0094, 0123

NextWave 0051, 0130, 0273

Nikko 0123, 0225

Nokia 0003, 0020, 0064, 0079, 0084, 0103,

0114, 0156, 0170, 0196, 0221,

0233, 0235, 0241, 0253, 0254,

0257, 0262, 0263, 0264, 0265,

0284, 0310, 0311, 0320, 0323,

0332, 0333, 0396, 0400, 0413

Nomex0058

Nordmende 0002, 0003, 0004, 0006, 0055,

0075, 0107, 0290, 0324, 0391

Noos 0434

Nova 0126

Novis 0019, 0075

Oceanic 0024

Octagon 0002, 0005, 0021, 0077, 0087

Okano 0033, 0034, 0225

Ondigital 0070, 0386, 0387

Optex 0022, 0025

Optus 0114, 0126, 0130

Orbit 0014

Orbitech 0002, 0083, 0085, 0112, 0114,

0116, 0390

Osat 0005, 0106, 0388

Otto Versand 0017

Pace 0003, 0007, 0017, 0020, 0031, 0044,

0061, 0068, 0070, 0101, 0122,

0132, 0155, 0183, 0199, 0201,

0202, 0203, 0205, 0289, 0301,

0307, 0329, 0394

Pacific 0024

Packsat 0122

Palcom 0004, 0012, 0028, 0029, 0107

Palladium 0116, 0117, 0225, 0412

Palsat 0112, 0116

Paltec 0012

Panasat 0120, 0126

4

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 4

Downloaded From TV-Manual.com Manuals

Panasoic 0003, 0020, 0044, 0101, 0155, 0192,

0318

Panda 0003, 0007, 0061, 0064, 0113, 0119

Patriot 0122, 0222

Phoenix 0021, 0031, 0068, 0077

Phonotrend 0003, 0005, 0025, 0033, 0072,

0346

Pioneer 0109, 0114, 0197, 0373, 0405, 0415,

0416

Polsat 0055

Polytron 0022

Predki 0019, 0075

Preisner 0078, 0085, 0091, 0222

Premiere 0025, 0047, 0073, 0109, 0114,

0157, 0253, 0254, 0266

Priesner 0225

Profile 0038, 0122

Promax0003

Prosat 0004, 0005, 0031, 0045, 0072, 0088,

0107, 0270

Prosonic 0096

Protek 0024

Provision 0006

PVP Stereo Visual Matrix 0422

Pye 0117

Quadral 0004, 0005, 0010, 0072, 0085, 0088,

0095, 0107, 0108, 0115, 0122, 0132

Quelle 0017, 0071, 0110, 0119, 0275

Quiero 0055

Radiola 0043, 0105

Radix 0016, 0078, 0089, 0127, 0191, 0247,

0256, 0380, 0397, 0399

Rainbow 0005, 0087, 0089

Rediffusion 0041

Redpoint 0013, 0082

RedStar 0010, 0108, 0115

RFT 0005, 0043, 0069, 0072, 0083, 0105

Roadstar 0123

Roch 0111

Rover 0088, 0115, 0123

Ruefach 0038

Saba 0006, 0020, 0045, 0068, 0093, 0094,

0095, 0110, 0119, 0122, 0128,

0270, 0289, 0290, 0319, 0326,

0334, 0337, 0338, 0339, 0340, 0391

Sabre 0003

Sagem 0055, 0099, 0434

Sakura 0021, 0031, 0077

Salora 0041, 0064, 0302, 0307

Samsung 0002, 0153, 0154, 0162, 0193, 0204,

0280

SAT 0004, 0014, 0015, 0074, 0090, 0116,

0405

Sat Cruiser 0130

Sat Partner 0116

Sat Team 0123

Satcom 0018, 0039, 0076, 0086, 0118, 0119,

0306

Satec 0020, 0068, 0123

Satelco 0108, 0115

Satford 0018, 0076

Satline 0088

Satmaster 0018, 0076

SatPartner 0002, 0005, 0006, 0019, 0032,

0033, 0075

Satplus 0112

Schacke 0087

Schneider 0010, 0050, 0052, 0057, 0097,

0112, 0122, 0285, 0303, 0347, 0385

Schwaiger 0022, 0024, 0039, 0051, 0068,

0085, 0086, 0112, 0118, 0119,

0128, 0222, 0272, 0299, 0305,

0335, 0337, 0339, 0340, 0341,

0346, 0347, 0357, 0370, 0383, 0385

Scientific Atlanta 0417, 0418

SCS 0110

Sedea Electronique 0129, 0222

Seemann 0013, 0016, 0082, 0108, 0225

SEG 0002, 0010, 0019, 0039, 0075, 0086,

0096, 0108, 0115, 0118, 0139,

0229, 0231, 0234, 0250, 0258,

0317, 0384

Seleco 0025, 0102

Septimo 0128

Servi Sat 0111, 0123

Siemens 0017, 0066, 0091, 0113

Silva 0032

Skantin 0123

Skardin 0013, 0082

Skinsat 0116

SKR 0123

SKY 0125

Sky Digital 0044

Skymaster0005, 0039, 0052, 0072, 0086,

0088, 0104, 0112, 0118, 0123,

0139, 0149, 0158, 0219, 0227,

0246, 0249, 0255, 0268, 0321,

0322, 0347, 0348, 0349, 0350,

0351, 0352, 0374

Skymax0043, 0105

SkySat 0112, 0116, 0118, 0119, 0123

Skyvision 0025

SL 0094, 0222

SM Electronic 0112, 0123

Smart 0110, 0123, 0127, 0222

Sony 0044, 0114, 0276

SR 0037, 0222, 0225, 0290

Starcom 0432

Starland 0052, 0123

Starring0019, 0075

Start Trak 0002

Strong 0002, 0005, 0010, 0032, 0045, 0108,

0114, 0115, 0126, 0129, 0231,

0232, 0234, 0238, 0243, 0245,

0253, 0266, 0284

STVO 0111

Sumida 0225

Sunny Sound 0108, 0115

Sunsat 0082, 0123

Sunstar 0037, 0108, 0115, 0222, 0225, 0307

Super Sat 0121

Supermax 0130

Systec 0222

Tandberg 0055

Tandy 0005

Tantec 0003, 0020, 0028, 0029, 0289

Tatung 0023

TCM 0010, 0039, 0050, 0052, 0057, 0133,

0134, 0135, 0136, 0137, 0138,

0139, 0140, 0141, 0142, 0143,

0144, 0145, 0146, 0147, 0148,

0297, 0303, 0347, 0372

Techniland 0018, 0076

TechniSat 0016, 0029, 0060, 0083, 0105,

0112, 0114, 0116, 0150, 0151,

0164, 0185, 0194, 0213, 0214,

0220, 0224, 0226, 0236, 0239,

0240, 0260, 0267, 0308, 0309,

0390, 0398

Technology 0126

Technosat 0130

Technowelt 0119, 0128, 0222

Teco 0037, 0225

Tele+1 0411, 0427, 0433

Telanor 0004

Telasat 0039, 0086, 0110, 0118, 0119

Teleciel 0087

Telecom 0123

Teledirekt 0068

Telefunken 0002, 0020, 0049, 0095, 0122,

0330, 0334, 0335, 0336

Teleka 0005, 0016, 0078, 0081, 0087, 0094,

0116, 0119, 0225, 0280, 0393

Telemaster 0006

Telemax 0035

Telepiu 0427, 0433

Telesat 0039, 0086, 0118, 0119

Telestar 0029, 0112, 0114, 0116

Teletech 0104

Televes 0003, 0056, 0222, 0365

Telewire 0025

Tempo 0130

Tevion 0010, 0039, 0050, 0052, 0057, 0123,

0297, 0303, 0347, 0372

5

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 5

Downloaded From TV-Manual.com Manuals

Thomson 0003, 0011, 0027, 0046, 0049,

0055, 0073, 0110, 0114, 0119,

0122, 0123, 0168, 0172, 0173,

0177, 0178, 0180, 0181, 0290,

0330, 0391, 0401, 0402, 0403, 0404

Thorens 0024

Thorn 0003, 0007, 0020, 0289, 0291

Tioko 0022, 0222

Tokai 0105

Tonna 0003, 0018, 0025, 0076, 0116, 0123

Torx 0432

TPS 0048

Triad 0014, 0015, 0032, 0074, 0312

Triasat 0030, 0080, 0116

Triax 0017, 0029, 0080, 0110, 0116, 0123,

0222, 0334, 0364

Turnsat 0123

Tvonics 0182

Twinner 0056, 0111, 0123, 0222, 0365

UEC 0126, 0131

Uher 0112

Uniden 0042, 0090

Unisat 0021, 0077, 0105, 0222, 0225

Unitor 0009, 0019

United Cable 0422

Universum 0017, 0066, 0079, 0090, 0096,

0110, 0113, 0117, 0119, 0292,

0412, 0413

Variosat 0017, 0066, 0113

Vega 0115

Ventana 0043, 0105

Vestel 0096

Via Digital 0046

Viasat 0132

Videoway 0423

Visionic 0019, 0025, 0052, 0053, 0093, 0122,

0123, 0353, 0354, 0355, 0356

Visiopass 0413, 0429, 0434

Visiosat122, 140, 156

Viva 0069

Vivanco0059

Vivid 0131

Vor tec 0002, 0070, 0280

V-Tech 0014, 0015, 0074, 0093, 0098, 0124,

0304, 0313

Wela 0085

Welltech 0112

WeTe K om 0112, 0116, 0118

Wevasat 0003

Wewa 0003

Winersat 0019, 0075

Wintergarten 0072

Wisi 0003, 0014, 0015, 0016, 0017, 0066,

0074, 0078, 0085, 0093, 0113,

0116, 0119, 0143, 0148, 0223,

Wisi 0228, 0230, 0235, 0236, 0242, 024,

0248, 0252, 0259, 0261, 0262,

0312, 314, 0315, 0316, 0356, 0375,

0376, 0377, 0378, 0379

Wittenberg 0405

Woorisat 0006

World 0075

Worldsat 0122

Xrypton 0108, 0115

Xsat 0123, 0132

Zaunkonig 0094

Zehnder 0006, 0009, 0010, 0015, 0034,

0074, 0096, 0098, 0108, 0110,

0115, 0124, 0171, 0219, 0299,

0317, 0381, 0382

Zenith 0125

Zinwell 0157

Zodiac 0005, 0087

HTS Codes

Philips 0000, 0002, 0003, 0004, 0009,

0020, 0027, 0030, 0031, 0032,

0033, 0034, 0052, 0062, 0063,

0064, 0065, 0066, 0067, 0071,

0078, 0079, 0080, 0081, 0121,

0127, 0161, 0176, 0272, 0273,

0274, 0275, 0276, 0277, 0278,

0279, 0280, 0281, 0295, 0296,

0308, 0309, 0312, 0313

Aiwa 0023, 0043, 0090, 0091, 0092, 0162,

0163, 0168, 0169, 0170, 0199,

0200, 0201, 0288, 0289, 0290, 0291

Alba 0100

Denon 0058, 0059, 0060, 0061, 0072, 0073

Denver 0028, 0086, 0087, 0105, 0106

DK digital 0007

Eltax 0005

Goodmans 0103, 0104

Harman/Kardon 0045

Hitachi 0022, 0041, 0095, 0096, 0097

JVC 0008, 0015, 0044, 0055, 0056, 0057,

0125, 0126, 0128, 0129, 0150,

0151, 0164, 0165, 0183, 0211,

0212, 0213, 0219, 0220, 0221,

0222, 0223, 0224, 0225, 0231,

0232, 0233, 0240, 0241, 0242,

0262, 0263, 0264, 0265, 0266

Kenwood 0018, 0094, 0155, 0194, 0202,

0203, 0204, 0214, 0215, 0216,

0230, 0243, 0244, 0245, 0253, 0254

LG 0024, 0098, 0099, 0117, 0118, 0119,

0207, 0314

Magnavox 0127

Mustek 0012

Panasonic 0010, 0011, 0019, 0035, 0036,

0037, 0038, 0039, 0042, 0075,

0076, 0077, 0147, 0148, 0149,

0158, 0159, 0160, 0171, 0172,

0173, 0174, 0177, 0189, 0190,

0191, 0195, 0196, 0236, 0237,

0286, 0287, 0297, 0298, 0299,

0300, 0301, 0302, 0315, 0318

Pioneer 0025, 0084, 0085, 0138, 0139,

0209, 0210, 0226, 0227, 0249,

0282, 0283, 0284, 0285, 0292,

0293, 0294, 0310, 0316, 0317

Saba 0101, 0102

Samsung 0017, 0088, 0089, 0250, 0251,

0252

Sanyo 0014, 0016, 0082, 0083, 0167

Sharp 0068, 0069, 0070, 0132, 0133, 0134,

0155, 0181, 0182, 0230, 0238,

0239, 0303, 0304

Sony 0006, 0013, 0021, 0029, 0040, 0043,

0049, 0050, 0051, 0116, 0120,

0122, 0123, 0124, 0140, 0141,

0142, 0143, 0144, 0145, 0146,

0156, 0157, 0175, 0184, 0185,

0186, 0187, 0188, 0192, 0193,

0197, 0198, 0205, 0206, 0207,

0208, 0217, 0218, 0228, 0229,

0234, 0234, 0255, 0256, 0257,

0260, 0261, 0269, 0270, 0271,

0305, 0306, 0311

TCM 0001, 0046, 0107, 0108, 0109, 0110,

0111, 0112, 0113, 0114, 0115, 0116

Teac 0053, 0054, 0267, 0268

Technics 0035, 0047, 0048, 0074, 0152, 0153,

0154, 0166, 0171, 0246, 0247, 0248

Thomson 0130, 0131, 0135, 0136, 0137,

0175, 0178, 0179, 0180, 0205

Yamaha 0026, 0093, 0258, 0259

6

2705.3_cod_EN_EL 16-05-2008 10:48 Pagina 6

Downloaded From TV-Manual.com Manuals

cover 2705.3 16-05-2008 10:49 Pagina 3

Downloaded From TV-Manual.com Manuals

Printed in Belgium

Contact information Type no.

Product no.

België / Belgique

078 250 145 €0.06/min

Danmark

3525 8759 Local

Deutschland

01803 386 852 €0.09/min

France

0821 611 655 €0.09/min

E§§A™

0 0800 3122 1280 ¢ˆÚ¿Ó

España

902 888 784 €0.10/min

Ireland

01 601 1777 Local

Italia

8403 20086 €0.08/min

Luxembourg

40 6661 5644 Locale

Nederland

0900 8407 €0.10/min

Norge

2270 8111 Local

Österreich

0810 000205 €0.07/min

Portugal

2 1359 1442 Local

Schweiz / Suisse / Svizzera

0844 800 544 Local

Svenska

08 5792 9100 Local

Suomi

09 2311 3415 Local

United Kingdom

0870 900 9070 Local

cover 2705.3 16-05-2008 10:49 Pagina 4

Downloaded From TV-Manual.com Manuals