Philips BTM1360/05 User Manual Quick Start Guide Btm1360 05 Qsg Eng

BTM1360/05 Quick start guide btm1360_05_qsg_aen Micro music system BTM1360/05 | PhilipsBTM1360/05

User Manual: Philips BTM1360/05 Quick start guide Micro music system BTM1360/05 | PhilipsBTM1360/05

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadPhilips BTM1360/05 User Manual Quick Start Guide Btm1360 05 Qsg Eng
Open PDF In BrowserView PDF
www.philips.com/support
Question?
Contact
Philips

BTM1360

Safety

Notice

Read and understand all instructions before you use this micro
music system. If damage is caused by failure to follow the
instructions, the warranty does not apply.
 

Any changes or modifications made to this device that are not
expressly approved by Gibson Innovations may void the user’s
authority to operate the equipment.

This ‘bolt of lightning’ indicates uninsulated material within the
device may cause an electrical shock. For the safety of everyone
in your household, please do not remove the covering.
The ‘exclamation mark’ calls attention to features for which you
should read the enclosed literature closely to prevent operating
and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, the device
should not be exposed to rain or moisture and objects filled with
liquids, such as vases, should not be placed on the device.
CAUTION: To prevent electric shock, fully insert the plug. (For
regions with polarized plugs: To prevent electric shock, match
wide blade to wide slot.)

Quick start guide

••
••
••
••
••
••

Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never look into the laser beam inside this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Ensure that you always have easy access to the power cord, plug or
adaptor to disconnect the apparatus from the power.

Mains fuse
This information applies only to products with a UK mains plug.
This product is fitted with an approved non-molded plug. If you
replace the fuse, use one with:
•	 the ratings shown on the plug,
•	 a BS 1362 approval, and
•	 the ASTA approval mark.
Contact your dealer if you are not sure about what type of fuse to use.
Caution: To conform with the EMC directive (2004/108/EC), do not
detach the plug from the power cord.

•	
•	
•	
•	
•	

BTM1360_05_QSG_V2.0

This apparatus includes this label:

•	

The device shall not exposed to dripping or splashing.
Do no place any source of danger on the device (e.g.
liquid filled objects. lit candles).
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
Make sure that there is enough free space around the
product for ventilation.
Battery usage CAUTION – To prevent battery leakage
which may result in bodily injury, property damage, or
damage to the unit:
•	Install all batteries correctly, + and - as marked on the unit.
•	 Do not mix batteries (old and new or carbon and
alkaline, etc.).
•	 Batteries (packed or installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
•	 Remove batteries when the unit is not used for a
long time.
Only use attachments/accessories specified by the
manufacturer.

The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute
a criminal offence. This equipment should not be used for such
purposes.

Care for your product
•	
•	

Care of the environment
Disposal of your old product and battery

Warning

Important notes for users in the U.K.

This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd.,
and Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used
under license.

Compliance
Hereby, Gibson Innovations declares that this product is
in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. You can find the
Declaration of Conformity on www.philips.com/support.

The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Gibson Innovations is under license.

•	
•	

Do not insert any objects other than discs into the disc
compartment.
Do not insert warped or cracked discs into the disc
compartment.
Remove the discs from the disc compartment if you are
not using the product for an extended period of time.
Only use microfiber cloth to clean the product.
Note

Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.

•• The type plate is located on the back of the product.

Specifications
Amplifier
Total Output Power

Maximum 30 W

Frequency Response

60 Hz - 20 kHz; ±3 dB

Signal to Noise Ratio

≥75 dBA

Total Harmonic Distortion

<1%

This symbol means that the product contains batteries covered
by European Directive 2013/56/EU which cannot be disposed
of with normal household waste.
Inform yourself about the local separate collection system for
electrical and electronic products and batteries. Follow local
rules and never dispose of the product and batteries with
normal household waste. Correct disposal of old products
and batteries helps prevent negative consequences for the
environment and human health.

Aux Input

600 mV±100mV RMS 22kohm

Removing the disposable batteries
To remove the disposable batteries, see battery installation
section.

Tuning Range

87.5-108 MHz

Tuning grid

50 KHz

Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio

<22 dBf
<45 dBf

Search Selectivity

<30 dBf

Total Harmonic Distortion

<3%

Signal to Noise Ratio

>45 dB

This symbol on a product means that the product is covered
by European Directive 2012/19/EU.

Environmental information
All unnecessary packaging has been omitted. We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.

Speakers
Speaker Impedance

4 ohm

Speaker Driver

Full range 3.5"

Sensitivity

83 ± 3dB/m/W

Tuner (FM)

USB
USB Direct Version

2.0 Full Speed

Charging support

5V, 500mA

Disc
Laser Type

Semiconductor

Disc Diameter

12 cm/8 cm

Support Disc

CD-DA, CD-R, CD-RW, MP3CD

Audio DAC

24 Bits/44.1 KHz

Total Harmonic Distortion

<3% (1 KHz)

Frequency Response

20 Hz - 20 kHz (44.1 KHz)

S/N Ratio

≥80 dBA

Bluetooth
Bluetooth Version

V4.0

Frequency band/Output
power

2.400GHz - 2.483GHz ISM
Band / ≤ 4dBm (Class 2)

Bluetooth Range

10 m (free space)

General information
Switch on or to standby mode

Always there to help you
Register your product and get support at

www.philips.com/support
Question?
Contact
Philips

Quick start guide

BTM1360 _05_QSG_V2.0.indd 1

In standby mode, swich to
ECO standby mode

AC power

100-240 V~, 50/60 Hz

Operation Power
Consumption

< 20 W

Eco Standby Power
Consumption

< 0.5 W

Dimensions
- Main Unit (W x H x D)
- Speaker Box (W x H x D)

180 x 121 x 227 mm
120 x 195 x 143 mm

Weight
- Main Unit
- Speaker Box

1.54 kg
0.81 kg x 2

2017/6/21 10:14:33

Philips BTM1360

1
Note:

1	

Press to select the Bluetooth source.
»» [BT] (Bluetooth) is displayed. and the
Bluetooth indicator flashes blue.

2	

On your Bluetooth device, enable Bluetooth function
and search for devices.
In the device list, select ‘Philips BTM1360‘,input ‘0000’
if a password is required.
»» After successful pairing and connection, the
Bluetooth indicator turns solid blue, and the
product beeps twice.

3	

4	

•	

•	

If you fail to search for “Philips BTM1360‘’ or
cannot pair with this product, press and hold
SOURCE/PAIRING(or
on the remote
control) for three seconds until you hear a
beep sound to enter Bluetooth pairing mode.
Pressand hold
on the main set for 8
seconds to clear Bluetooth pairing history.

CLOCK
AUDIO IN

2
3

CLOCK

Repeat steps 2-3 to set hour and minute

Play audio on the connected device.

Control play
Start, pause, or resume play.
Stop play.
Select an album or a folder.

/
/

CD/MP3-CD

Press to skip to the previous or next track.
Press and hold to search backward/forward
within a track.
Play a track or all tracks repeatedly.
Play tracks randomly.

VOL +/-

Increase or decrease the volume.
Mute or unmute sound.

SOUND

Select a preset sound equalizer.

DISPLAY

Adjust display brightness.

Press to select the sleep timer period.
When [OFF] (off) is displayed, the sleep timer is deactivated.
•	 Make sure that you have set the clock correctly.
•	 Repeat steps 2-3 to set minute, select a source, and set
the alarm volume.

Store FM radio station manually

MHZ

Note: For optimal reception, fully extend and adjust the
position of the antenna.

Always there to help you

PDF

www.philips.com/support.

Register your product and get support at

www.philips.com/support
Question?
Contact
Philips

User Manual

Tune to FM radio stations

Store FM radio stations automatically

To download the full user manual, visit www.philips.com/support.

FM
MHZ

MHZ

Select a preset FM radio station
MHZ

MHZ

BTM1360 _05_QSG_V2.0.indd 2

2017/6/21 10:14:39



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : zh-CN
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu