Philips CD1801B/05 CD180 English Quick Start Guide User Manual Guida Rapida Cd1801b 05 Qsg Eng
CD1801B/05 Guida rapida cd1801b_05_qsg_aen BeNear Telefono cordless CD1801B/05 | PhilipsCD1801B/05
CD1802B/05 Quick start guide cd1802b_05_qsg_eng BeNear Cordless phone CD1802B/05 | PhilipsCD1802B/05
CD1802B/05 Quick start guide cd1802b_05_qsg_aen BeNear Cordless phone CD1802B/05 | PhilipsCD1802B/05
CD180 English quick start guide cd1801b_05_qsg_eng
User Manual: Philips CD1801B/05 Guida rapida BeNear Telefono cordless CD1801B/05 | PhilipsCD1801B/05
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Quick start guide CD180 Important safety instructions • • • • Use only the power adapter listed in the technical data. Do not allow the product to come into contact with liquids. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. (Refer to the user manual online) Overview Earpiece Microphone • Find handsets. • Register additional handsets. In call In idle mode Enter the option menu menu REDIAL/C Enter the redial list Enter the redial list Increase the volume Enter the phonebook Decrease the Enter the call log volume Make and receive calls End calls Turn handset on/off (press and hold) Mute/unmute the microphone R Recall key* *network dependent MENU/OK Enter the option In menu Confirm selection Cancel operation Scroll up Scroll down Exit menu/operation It displays the connection between the handset and the base. The more the bars are shown, the better the connection is. It indicates a received call in the call log. It indicates an outgoing call in the redial list. It flashes when there is a new missed call. It remains steadily on when browsing the missed calls in call log. It flashes when receiving incoming call. It remains steadily on during a call. The ringer is off. If you are using a voice mailbox from your provider, this icon flashes when there is a new message. It remains steadily on when the voice messages are already viewed in the call log. The icon is not shown when there is no voice message. * This is network dependent It displays when you scroll up/down a list or increase and decrease the volume. There are more digits on the right. Press REDIAL/C to read. 1 Connect Connect the base station Telephone socket Power socket 1 Connect each end of the power adapter to: Power socket Power adapter Telephone base station 2 1 3 Extra handset charger • the DC input jack at the bottom of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the bottom of the base station; • the telephone socket on the wall. For multi-handset version only: 3 Connect each end of the power adapter to: • the DC input jack at the bottom of the extra handset charger. • the power socket on the wall. 2 Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). After the welcome message, press MENU/OK. 3 Please set the country and language if prompted. 4 Set the date and time. • If the time is in 12-hour format, press / key to select [AM] or [PM]. Charge your phone Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. »» The handset starts charging. Note Charge the batteries for 8 hours before first use. Check the battery level Charge 8 hours When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging. 3 Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press . Earpiece volume Press or to adjust the volume during a call. Phonebook Add record 1 Press MENU/OK, then select [PHONEBOOK] > [ADD NEW], then press MENU/OK to confirm. 2 Enter the name, then press MENU/OK to confirm. 3 Enter the number, then press MENU/OK to confirm. Call from the phonebook 1 Press or, press MENU/OK > [PHONEBOOK] > [VIEW] to access the phonebook list. 2 Select a contact. 3 Press to make the call. Direct access memory You have 2 direct access memories (Keys 1 and 2). To dial the saved phone number automatically, press and hold on the keys in idle mode. Depending on your country, Keys 1 and 2 are preset to [1_VOICEMAIL] (voice mail number) and [2_INFO SVC] (information service number) of your network operator respectively (network dependent). Call log Redial list To make a call To make a call To view more details To save a call record to the phonebook 1 Press 2 Press and select a record. . 2 Press MENU/OK. 3 Select [VIEW]. To save a call record to the phonebook 2 Press MENU/OK. 3 Select [Save number]. 4 Press MENU/OK to confirm. 5 Enter the name. 6 Press MENU/OK to confirm. 7 Press MENU/OK to save. To delete a call record 2 Press MENU/OK. 3 Select [Delete] or [Delete all]. 4 Press MENU/OK to confirm. 1 Press REDIAL/C and select a record. 2 Press . 2 Press MENU/OK. 3 Select [Save number]. 4 Press MENU/OK to confirm. 5 Enter the name. 6 Press MENU/OK to confirm. 7 Press MENU/OK to save. To delete a call record 2 Press MENU/OK. 3 Select [Delete] or [Delete all]. 4 Press MENU/OK to confirm. Register the handsets You can register additional handsets to the base station. The base station can register up to 4 handsets. 1 Press MENU/OK on the handset. 2 Select [SERVICES] > [Register], then press MENU/OK to confirm. 3 Press and hold on the base station for 5 seconds. 4 Enter the system PIN (0000). 5 Press MENU/OK to confirm the PIN. »» Registration is completed in less than 2 minutes. Restore default settings You can reset your phone settings to the original factory settings. 1 Press MENU/OK. 2 Select [SERVICES] > [Reset], then press MENU/OK to confirm. »» The handset displays a confirmation request. 3 Press MENU/OK to confirm. »» All settings are reset »» The welcome screen displays. Technical data Battery • CORUN: 2 x AAA NiMH 1.2V Rechargeable 500mAh batteries • SANIK: 2 x AAA NiMH 1.2V Rechargeable 500mAh batteries Power adapter Base and charger: • Philips: SSW-1920EU-2/SSW-1920UK-2/S003PV0600050/ S003PB0600050: Input: 100-240V 50/60Hz 0.2A; Output: 6V 500mA Note Hereby Philips Consumer Lifestyle, declares that the CD180 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.You can find the Declaration of Conformity on www.p4c.philips.com. Frequently asked questions No signal bar displays on the screen. • The handset is out of range. Move it closer to the base station. • If the handset displays [Unregistered], register your handset (See the section on Register the handsets). If I fail to register the additional handsets to the base station, what do I do? Your base memory is full. Unregister the unused handsets and try again. No dialing tone • Check your phone connections. • The handset is out of range. Move it closer to the base station. I cannot change the settings of my voice mail, what do I do? The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings. The handset on the charger does not charge. • Ensure the batteries are inserted correctly. • Ensure the handset is placed properly on the charger. The battery icon animates when charging. • The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth. • Batteries are defective. Purchase new ones from your dealer. No display • Ensure the batteries are charged. • Ensure there are power and phone connections. Bad audio (crackles, echo, etc.) • The handset is nearly out of range. Move it closer to the base station. • The phone receives interference from the nearby electrical appliances. Move the base station away from them. • The phone is at a location with thick walls. Move the base away from them. The handset does not ring. Ensure the handset ringtone is turned on. The caller ID does not display. • The service is not activated. Check with your service provider. • The caller’s information is withheld or unavailable. Welcome to Philips Register your product at www.philips.com/welcome Need help? User manual / Online help www.philips.com/support When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. © 2013 Koninklijke Philips Electronics N.V. All rights reserved. 0168 qsg_CD180_en_v4.0 wk13043
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:eeb89775-10b0-48aa-84f1-0dee0e56986f Document ID : adobe:docid:indd:60f12569-f3e2-11df-9b47-d2cc42d9a058 Original Document ID : adobe:docid:indd:60f12569-f3e2-11df-9b47-d2cc42d9a058 Rendition Class : proof:pdf Derived From Instance ID : 49a43c6c-f2f3-11df-9c45-dffb94615ef8 Derived From Document ID : adobe:docid:indd:49a43c6b-f2f3-11df-9c45-dffb94615ef8 History Action : saved, saved, saved, saved History Instance ID : xmp.iid:C00F89B5C263E211ACF0FF3B34331D5C, xmp.iid:C10F89B5C263E211ACF0FF3B34331D5C, xmp.iid:6B42BFD1C363E211ACF0FF3B34331D5C, xmp.iid:6C42BFD1C363E211ACF0FF3B34331D5C History When : 2013:01:21 20:04:29+08:00, 2013:01:21 20:04:29+08:00, 2013:01:21 20:12:33+08:00, 2013:01:21 20:12:33+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata Create Date : 2013:01:22 14:37:39+08:00 Modify Date : 2013:01:22 14:37:42+08:00 Metadata Date : 2013:01:22 14:37:42+08:00 Creator Tool : Adobe InDesign CS5_J (7.0.4) Format : application/pdf Title : CD180 English quick start guide Creator : Philips Consumer Lifestyle Startup Profile : Print Doc Change Count : 31 Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 12 Author : Philips Consumer LifestyleEXIF Metadata provided by EXIF.tools