Philips HTL3140B/05 FIN_HTL21x3,31x0_v1.2_ENG User Manual Installation Instructions Htl3140b 05 Fin Aen

HTL3140S/12 Installation instructions htl3140s_12_fin_eng Soundbar speaker HTL3140S/12 | PhilipsHTL3140S/12

HTL3140S/12 Installation instructions htl3140s_12_fin_aen Soundbar speaker HTL3140S/12 | PhilipsHTL3140S/12

HTL3140B/12 Upute za firmver htl3140b_12_fin_eng Soundbar, zvučnik HTL3140B/12 | PhilipsHTL3140B/12

HTL3140B/12 Upute za firmver htl3140b_12_fin_aen Soundbar, zvučnik HTL3140B/12 | PhilipsHTL3140B/12

HTL3140B/05 Installation instructions htl3140b_05_fin_eng Soundbar speaker HTL3140B/05 | PhilipsHTL3140B/05

User Manual: Philips HTL3140B/05 Installation instructions Soundbar speaker HTL3140B/05 | PhilipsHTL3140B/05

Open the PDF directly: View PDF .
Page Count: 1

Software Update Instructions

To get the best features and support, update

your product with the latest software.

What you need

• Connect Soundbar to your TV through HDMI (recomme

nded non HDMI ARC input)

Note:

• This software update can be completed without connect

ing TV through HDMI but you have to follow the local disp

lay on the soundbar carefully.

Check software version

In HDMI ARC source mode, press TREBLE -,

BASS - and VOLUME - on the remote control.

Check on TV screen for version info

Vxx.xx.xx.xx

Check on Sound bar local display for version info (will sh

ow in following sequence)

1) Main Version

2) RISC version

3) TX version

4) RX version

5) Touch Panel version

6) Repeater version (if applicable)

Update software via USB

1

Check the latest software version on www.philips.com/

support.

• Search for your model and click on "Software and driver

s".

2

Download the software into a USB storage device.

a. Unzip the downloaded file, and make sure that the unzi

pped file is named the following:

HTL2153 - "HTL2153.BIN".

HTL2163 - "HTL2163.BIN".

HTL3110 - "HTL3110.BIN".

HTL314X - "HTL3140.BIN".

b Put the related software file in the

root directory of the USB storage device.

3

Connect the USB storage device to the (USB) connect

or on this product.

4

Switch this product to the HDMI ARC source, and swit

ch your TV to the HDMI source

5

On the remote control, within 6 seconds press MUTE t

wice, and VOLUME+ once, then hold down SURROUND

ON.

»» If an upgrade media is detected, on the TV screen you

are prompted to start the update.

On Soundbar local display, message “UPGRADE” will be

shown

»» If an upgrade media is not detected, an error message

is displayed on the TV screen. Make sure that the latest

software of this product is put in the USB storage device.

6

Press MUTE to start the update.

On Soundbar local display, message “UPGRADE” will be

shown,

7

Wait until the update is completed.

On Soundbar local display, it will show “DONE” -> “RES

TART” when update is completed

»» If the update is complete, the Soundbar will automatic

ally turn off and on again.

8

The update will be completed within 10 minutes

If you cannot complete the update at step 7, please powe

r off the device and unplug the USB storage device. Then

start from steps 3 -7 again.

9

Check the SW version to ensure the SW upgrade is do

ne successfully

Note

It is recommended that you perform a factory reset after s

oftware upgrade.