Philips HTS4600/12 1_hts4600_eu_eng1 User Manual Brukerveiledning Hts4600 12 Dfu Eng

User Manual: Philips HTS4600/12 Brukerveiledning Hjemmekinoanlegg med DVD-spiller HTS4600/12 | PhilipsHTS4600/12

Open the PDF directly: View PDF PDF.
Page Count: 46

HTS4600
Register your product and get support at
www.philips.com/welcome
EN DVD Home Theatre System 5
FR Home Cinéma DVD 47
ES Cine en casa con DVD 89
DE DVD Home Entertainment-System 131
NL DVD home theatre 173
2
Important notes for users in U.K.
Mains plug
This apparatus is fi tted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
Remove fuse cover and fuse.
Fix new fuse which should be a BS1362
5 Amp, A.S.T.A. or BSI approved type.
Re t the fuse cover.
If the fi tted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fi tted in its place.
If the mains plug contains a fuse, this should have
a value of 5 Amp. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5 Amp.
Note: The severed plug must be disposed off to
avoid a possible shock hazard should it be inserted
into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the
following code: blue = neutral (N),
brown = live (L).
As these colours may not correspond with
the colour markings identifying the terminals
in your plug, proceed as follows:
Connect the blue wire to the terminal
marked N or coloured black.
Connect the brown wire to the
terminal marked L or coloured red.
Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
1.
2.
3.
•
•
•
•
Norge
Typeskilt fi nnes på apparatens underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er derfor
ikke frakoplet nettet så lenge apparatet er
tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio HTS4600, Philips
risponde alle prescrizioni dell’art. 2 comma 1 del
D.M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 25616 JB Eindhoven,
The Netherlands
3
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket sidder i
stikkontakten.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specifi cerats, kan
användaren utsättas för osynlig laserstrålning,
som överskrider gränsen för laserklass 1.
Observera! Stömbrytaren är sekundärt kopplad
och bryter inte strömmen från nätet. Den
inbyggda nätdelen är därför ansluten till elnätet
så länge stickproppen sitter i vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin
tässä käyttöohjeessa mainitulla tavalla saattaa
altistaa käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla
alttiina tippu-ja roiskevedelle.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-osa on
kytkettynä sähköverkkoon aina silloin, kun
pistoke on pistorasiassa.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’
4
ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks
LASER
Type Semiconductor laser
GaAIAs
Wave length 650 - 660 nm (DVD)
784 - 796 nm (CD)
Output Power 6 mW (DVD)
7 mW (VCD/CD)
Beam divergence 60 degrees
•
•
•
•
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the double-D
symbol are registered trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS,
Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
DivX, DivX Ultra Certifi ed, and associated logos
are trademarks of DivX, Inc. and are used under
license.
Offi cial DivX® Ultra Certifi ed product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media fi les and the DivX® Media Format.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
HDMI, and HDMI logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
CLASS 1
LASER PRODUCT
English
EN 5
Contents
Contents
1 Important 6
Safety and important notice 6
2 Your product 7
Features highlight 7
Product overview 8
3 Connect 11
Place the unit 11
Connect video cables 12
Connect speakers to subwoofer 14
Connect subwoofer and radio antenna 14
Connect audio cables/other devices 15
Attach table stand to DVD Home
Theatre unit 16
Mount the DVD Home Theatre unit/
speakers 17
4 Get started 18
Prepare the remote control 18
Find the correct viewing channel 19
Select menu display language 19
Turn on Progressive Scan 20
Activate EasyLink control 21
Select a play source 22
5 Play 23
Play from disc 23
Play video 24
Play music 27
Play photo 28
Play from USB device 30
Play from portable media player 30
Play from radio 31
6 Adjust sound 33
Control the volume 33
Select surround sound 33
Select a preset sound effect 33
7 Adjust settings 34
General setup 34
Audio setup 35
Video setup 36
Preferences 39
8 Additional information 42
Update software 42
Care 42
Specifi cations 43
9 Troubleshooting 44
10 Glossary 46
6 EN
Recycle notice
Your product is designed and manufactured
with highly quality material and components,
which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by
the European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products. Please act according to your local
rules and do not dispose your old products
with your normal household waste. The
correct disposal of your old product will help to
prevent potential negative consequences for
the environment and human health.
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
1 Important
Safety and important notice
Warning!
Risk of fi re or electric shock!
Ensure that air can circulate freely through the
ventilation holes on this unit. Allow at least 5~10 cm
clearance around the unit.
Never expose this unit to direct sunlight, naked
fl ames or heat.
Never place this unit on other electrical equipment.
Keep away from this unit during lightning storms.
Never remove the casing of this unit. Please leave all
maintenance work to qualifi ed personnel.
Keep this unit away from water, moisture and liquid-
fi lled objects.
•
•
•
•
•
•
Caution!
Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Batteries contain chemical substances, they should
be disposed of properly.
Visible and invisible laser radiation when open.
Avoid exposure to beam.
Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
•
•
•
•
•
This product complies with the radio
interference requirements of the European
Community. This product complies with the
requirements of the following directives and
guidelines: 2006/95/EC, 2004/108/EC.
English
EN 7
Your product
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.philips.com/welcome.
This DVD Home Theatre is designed to
complement your home perfectly. Enjoy the
DVD Home Theatre with 2.1-channel surround
sound and excellent picture quality.
Features highlight
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD Home Theatre offers full high-defi nition
video playback up to 1080p resolution for an
amazing viewing experience. A highly detailed
picture and increased sharpness delivers a more
true-to-life picture.
EasyLink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Note
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
•
USB direct and MP3 link
Simply plug your USB device into the USB
socket to play your MP3/WMA/JPEG/DivX fi les;
or plug your portable media player to the MP3
LINK socket to enjoy the music play in superb
sound quality.
Sync the audio output with the video play
This DVD Home Theatre provides you the
feature of delaying the audio output if the video
signals that go directly to the TV is slower than
the audio streams.
Region codes
DVD movies are usually not released at the
same time in all regions of the world, thus all
DVD players are programmed to a specifi c
region code.
Countries DVD region code
Europe
ALL
2
Russia
ALL
5
8 EN
Product overview
Remote control
20
21
22
23
19
18
17
13
14
15
16
12
11
8
1
2
3
4
5
6
7
9
10
a 2
Turn on this unit or turn off to standby
mode.
Press and hold to turn off this unit and
all the HDMI CEC compliant TV/
devices (for EasyLink control only).
b Z (Open/Close)
Open or close the disc compartment.
c SLEEP
Select a preset timer to turn off this
unit to standby mode.
d INFO
Display the current status or disc
information.
Display photo fi les in 12 thumbnails
view.
e OPTIONS
Access or exit Options menu (this
menu provides various setting options).
f u (Play/Pause)
Start or pause disc play.
RADIO: start auto radio installation
(only available for fi rst time setup).
g x (Stop)
Stop disc play.
RADIO: erase the current preset radio
station.
h SOUND MODES +-
Select a predefi ned sound effect.
i AUDIO SYNC
Select an audio language/channel.
Press and hold to access audio sync
setting. Then press VOL +- to set
the audio delay time.
j ZOOM
Zoom in or out the picture on the TV.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
English
EN 9
Your product
k Source buttons
DISC: switch to DISC mode.
USB: switch to USB mode.
RADIO: switch to FM band.
AUX / MP3 LINK: switch to AUX, DI
(Digital Input) or MP3 LINK that
corresponds to the socket you used to
connect the external device.
l OK
Confi rm an entry or selection.
m Cursor buttons (v V b B)
Navigate through the on-screen menu.
Press left or right for fast forward and
backward search.
RADIO: press up or down to tune the
radio frequency.
RADIO: press left or right to start auto
search.
n MENU / BACK
Return to the previous display menu.
For DVD, go to title menu.
For VCD version 2.0 or SVCD with
PBC turned on: return to the menu
during playback.
o í/ ë (Previous/Next)
Skip to the previous or next title/
chapter/track.
RADIO: select a preset radio station.
p H (Mute)
Mute or restore the volume.
q VOL +-
Adjust the volume level.
r SURROUND
Switch audio output to Dolby virtual
surround or stereo sound.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
s Numeric buttons
Enter a preset number or item to play.
t SUBTITLE
Select DVD or DivX subtitle language.
u REPEAT / PROGRAM
Select various repeat or shuffl e modes;
turns off repeat or shuffl e mode.
RADIO: press this button to start
manual radio preset.
RADIO: press and hold this button to
start automatic radio preset.
v REPEAT A-B
Mark a specifi c section for repeat play.
w ANGLE
Select a different viewing angle of a
DVD movie.
•
•
•
•
•
•
•
10 EN
Main unit
a 2 (Standby-on)
Turn on this unit or turn off to standby
mode.
b SOURCE
Select a play media: DISC, FM, AUX, DI
(Digital Input) or MP3 LINK.
c PLAY/PAUSE u
Start or pause disc play.
RADIO: start auto radio installation
(only available for fi rst time setup).
d VOLUME +-
Adjust the volume level.
e Display panel
f Disc compartment
g OPEN/CLOSE Z
Open or close the disc compartment.
•
•
•
•
•
•
h FM radio antenna socket
To connect radio antenna.
i AUX IN socket
To connect audio output from other
device to route its sound output to this
unit.
j (USB) socket
To connect USB fl ash drive, USB
memory reader or digital camera.
k MP3 LINK socket
To connect portable audio player.
•
•
•
•
1234568
7
9
10
11
English
EN 11
Connect
3 Connect
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Basic connections:
Place the unit
Connect video cables
Connect speakers to subwoofer
Connect subwoofer and radio antenna
Optional connections:
Connect audio cables/other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
Attach table stand to DVD Home Theatre
unit
Mount the DVD Home Theatre unit/
speakers
Note
Refer to the type plate at the rear or bottom of the
product for identifi cation and supply ratings.
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
•
•
•
•
•
•
•
•
•
•
•
•
•
Place the unit
For optimum performance, place this unit
on top of a table or mount it on the wall.
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where
the AC power plug can be easily reached.
RIGHT
LEFT
1 Place this DVD Home Theatre unit near to
the TV.
Attach the table stand to the DVD
Home Theatre unit before place it on a
table top.
2 Place the speakers at the normal listening
ear-level and directly parallel to the
listening area.
3 Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
Note
To avoid magnetic interference or unwanted noise,
never place the speakers too close to the TV or any
radiation devices.
•
•
•
•
•
12 EN
Connect video cables
This section describes how to connect this
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to Scart socket (for a
standard TV).
Option 3: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
Option 4: Connect to Video (CVBS) socket
(for a standard TV).
Note
You must connect this unit directly to a TV.•
Option 1: Connect to HDMI socket
HDMI IN
HDMI OUT
1 Connect a HDMI cable (not supplied)
from the HDMI OUT on this unit to the
HDMI IN socket on your TV.
•
•
•
•
Note
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
•
Tips
To optimise the video output, see chapter ‘Adjust
settings’ > [ Video Setup ] > [ HDMI Setup ] for
details.
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter ‘Activate EasyLink control’ for
details.
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
This type of connections provide best picture quality.
•
•
•
•
•
Option 2: Connect to Scart socket
SCART
CVBS OUT
1 Connect the scart converter cable
(supplied) from the CVBS OUT socket on
this unit to the scart input socket on your
TV.
English
EN 13
Connect
Option 3: Connect to component
video socket
1 Connect the component video cables (not
supplied) from the Y PB PR sockets on this
unit to the component video input sockets
on your TV.
If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tips
The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
This type of connections provide good picture
quality.
•
•
•
Option 4: Connect to Video (CVBS)
socket
VIDEO IN
CVBS OUT
1 Connect a composite video cable (not
supplied) from the CVBS OUT socket on
this unit to the video input socket on your
TV.
Tips
The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connections provide standard picture
quality.
•
•
14 EN
Connect speakers to
subwoofer
LEFT
RIGHT
1 Connect the left and right speakers to the
matching sockets on the subwoofer.
Note
Ensure that the front portion of the plug is fully
inserted into the socket.
•
Connect subwoofer and radio
antenna
1
3
2
1 Connect the interconnect cable (supplied)
from the TO SUBWOOFER socket on
this unit to the TO MAIN UNIT socket on
the subwoofer.
2 Connect the FM antenna (supplied) to the
FM75Ω socket on this unit (for some
models, this cable has been connected).
Extend the FM antenna and fi x its ends to
the wall.
3 Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theatre unit.
English
EN 15
Connect
Connect audio cables/other
devices
This section describes how you can route the
sound from other devices to this DVD Home
Theatre unit in order to enjoy sound output or
audio play with surround capabilities.
Connect audio from TV
(also used for EasyLink control)
AUX IN
1 Connect an audio cable (supplied) from
the AUX IN sockets on this unit to the
AUDIO OUT sockets on your TV.
Note
To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘AUX’ is
displayed on the display panel.
•
Connect audio from cable box/
recorder/game console
Connect to digital socket
COAXIAL
DIGITAL IN
1 Connect a coaxial cable (not supplied)
from the DIGITAL IN-COAXIAL socket
on the subwoofer to the COAXIAL/
DIGITAL OUT socket on the device.
Note
To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘DI’ is
displayed on the display panel.
•
16 EN
Connect portable media player
MP3 LINK
MP3
1 Connect a 3.5mm stereo audio cable
(supplied) from the MP3 LINK socket on
this unit to the phone socket on your
portable media player (such as MP3 player).
Note
To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘MP3 LINK’
is displayed on the display panel.
•
Connect USB device
1 Connect the USB device to (USB)
socket on this unit.
Note
This DVD Home Theatre unit can only play/view
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
To listen to the audio output from this connection,
press USB.
•
•
Attach table stand to DVD
Home Theatre unit
1 Ensure all the required cables are
connected to this unit.
2 Attach the table stand to the rear of this
unit and slide it to the left to lock into
position.
To remove the table stand, hold the
bottom of the stand and slide it to the
right.
A
A table stand
Note
Do not attach the table stand if you want to mount
this unit on the wall.
•
•
English
EN 17
Get started
Mount the DVD Home
Theatre unit/speakers
Caution!
Risk of personal injury and damage to the unit.
Allow only qualifi ed persons to mount the unit.
•
1 Ensure all the required cables are
connected to this unit.
2 Drill the screw holes and insert the rubber
wall plugs (not supplied) into the holes.
Use the supplied mounting guide for
accurate screw positions.
•
Before you mount the speaker, remove
its stand by pressing on the catches (A)
and pull it out.
A
3 Hook the DVD Home Theatre unit/
speakers fi rmly onto the screws.
Note
The height of the screw positions is 23.5mm
difference between the main unit and the speakers.
•
•
18 EN
4 Get started
Prepare the remote control
1 Push to open the battery compartment
cover.
2 Insert two batteries type R03 or AAA.
Match the indications (+-) inside the
battery compartment.
3 Close the cover.
Note
If you are not going to use the remote control for a
long time, remove the batteries.
•
Control a play source
1 Select the source you wish to control by
pressing the DISC, USB, RADIO or
AUX /MP3 LINK button.
2 Then select the desired function (for
example í, ë).
Navigate through the menu
1 Point the remote control directly at the
remote sensor on this unit and select the
desired function.
2 Use the following buttons on the remote
control to navigate through the on-screen
menus.
Button Action
v V Move up or down.
b B Move left or right.
Confi rm a selection.
Enter numbers.
English
EN 19
Get started
Find the correct viewing
channel
1 Press 2 to turn on the DVD Home
Theatre unit.
2 Press DISC to switch to disc mode
3 Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control
until you see the Video In channel.
You may press ° button repeatedly
on your TVs remote control.
Usually this channel is between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
Tips
See TVs user manual on how to select the correct
input on your TV.
•
•
•
•
Select menu display language
Note
You can skip this setting if this unit is connected to a
HDMI CEC compliant TV. It switches automatically
to the same OSD menu language as per your TV
setting.
•
1 Press DISC.
2 Press OPTIONS.
[ General Setup ] menu is displayed.
3 Press B.
4 Press vV to select [ OSD Language ] in
the menu, then press B.
General Setup
Screen Saver
DivX(R) VOD Code
Sleep
Display Dim
Disc Lock
OSD Language
English
Deutsch
Dansk
Français
Italiano
Nederlands
Auto
Suomi
The language options are different
depending on your country or region.
It may not correspond to the illustration
shown here.
5 Press vV to select a language, then press
OK.
Tips
To set the default language for DVD audio and disc
menu, see chapter ‘Adjust settings’ - [ Preferences ]
for details.
•
•
20 EN
Turn on Progressive Scan
If you connect this unit to TV with the
component video connection (see chapter
‘Connect video cables - Option 3: Connect to
component video socket’ for details), you can
set the progressive scan output if your TV
supports progressive scan.
1 Turn on the TV to the correct viewing
channel for this unit.
2 Press DISC.
3 Press OPTIONS.
4 Press V to select [ Video Setup ] in the
menu, then press B.
Picture Setting
HDMI Setup
TV Display
TV Type
Progressive
On
Off
Video Setup
Closed Caption
5 Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
6 To proceed, select [ OK ] in the menu and
press OK.
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press b.
3) Press AUDIO SYNC.
•
•
7 To exit the menu, press OPTIONS.
8 You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both this unit and
your TV.
•
English
EN 21
Get started
Activate EasyLink control
This feature is only applicable if this unit is
connected to HDMI CEC compliant TV/device.
It enables all the linked devices response or
react to certain commands simultaneously with
one touch control.
1 Turn on the HDMI CEC operations on
your TV and other connected devices. See
TVs/devices manual for details.
2 You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
When you press PLAY button, this unit will
wake- up from standby mode and start
disc play (if a video disc is found in the disc
compartment) and it will also turn on your
TV and switch to the correct viewing
channel.
One touch power off [ System Standby ]
When you press and hold STANDBY
button, it will turn off this unit and all the
linked devices to standby.
This unit also responses to standby
command from other HDMI CEC devices.
One touch audio input switching [ System
Audio Control ]
This unit is able to render the audio signals
from the active source. It switches
automatically to the corresponding audio
input and output the sound from its
speaker system.
Before you can enjoy this function, you
have to map the audio inputs to the
connected devices.
You can use any HDMI CEC TV/device
remote control to adjust the volume.
•
•
Note
To enable one touch play function, a video disc must
be placed in the disc compartment before operation.
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
•
•
Map the audio inputs to the
connected devices
Note
Before you start, ensure that an audio connection
has been made between this unit and your TV/
devices.
•
1 Press DISC.
2 Press OPTIONS.
3 Press V to select [ Video Setup ] in
the menu, then press B.
4 Select [ HDMI Setup ] > [ EasyLink ],
then press OK.
EasyLink
Auto Wake-up TV
System Standby
System Audio Control
HDMI Input Mapping
[ Auto Wake-up TV ] and [ System
Standby ] functions are turned on by
default in the factory.
5 Select [ System Audio Control ] > [ On ],
then press OK.
6 Select [ HDMI Input Mapping ], then press
OK.
•
22 EN
7 Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Coaxial In
AUX
HDMI Input Mapping
TV
Other (Non-HDMI)
For example, if your TV audio is
connected to the AUX IN sockets on
this unit, select [ AUX ] and map onto
the correct device (brand name) shown
at the right panel.
8 Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX, Coaxial In), then press B.
9 Select the correct device that connected
to this audio input, then press OK.
Repeat steps 8~9 to map other
connected devices.
10 To exit the menu, press OPTIONS.
•
•
Select a play source
On the main unit
1 Press SOURCE button repeatedly to
select: DISC > FM > AUX > DI > MP3
LINK > DISC ...
On the remote control
Press DISC to switch to DISC mode.
Press USB to switch to USB mode.
Press RADIO to switch to FM band.
Press AUX / MP3 LINK repeatedly to listen
to the audio output from the external
device.
Display Device connected to
AUX AUX IN sockets.
DI DIGITAL IN-COAXIAL
socket.
MP3 LINK MP3 LINK socket.
•
•
•
•
English
EN 23
Play
5 Play
Play from disc
Playable discs
DVD Video
Region 2 (Europe)
Region 5 (Russia)
•
•
DVD±RW
(DVD Rewritable)
DVD±R
(DVD Recordable)
DVD+R DL (DVD+R Double
Layer)
ReWritable
CD-RW (CD-Rewritable)
CD-R (CD-Recordable)
Audio CD (Compact Disc
Digital Audio)
Video CD
Formats 1.0, 1.1, 2.0•
Super Video CD
Note
DVDs and DVD players are designed with regional
restrictions. Ensure that the DVD video you play is
for the same region zone as your player (indicated
on its rear).
This unit can support playback of the following fi le
formats: MP3/WMA/JPEG/DivX.
•
•
Play a disc
Caution!
Never place any objects other than discs into the
disc compartment.
Never touch the disc optical lens inside the disc
compartment.
•
•
1 Press Z to open the disc compartment.
2 Insert a disc with its label facing out.
For double-sided disc, load the side to
play faces out.
3 Press Z to close the disc compartment
and start disc play.
To view disc play, turn on the TV to
the correct viewing channel for this
DVD Home Theatre unit.
4 To stop disc play, press x.
Tips
If the password entry menu is displayed, you have to
enter the 6-digit password before it can be played.
Screen saver displays automatically if the disc play
is stopped for about 5 minutes. To wake up from
screen saver, press DISC.
This unit automatically switches to standby mode if
you do not press any buttons within 15 minutes after
a disc has stopped playing.
•
•
•
•
•
24 EN
Play video
Note
For video disc, playback always resumes from the
point where it was last stopped. To start playback
from the beginning, press í while the message is
displayed.
•
Control a title
1 Play a title.
2 Use the remote control to control the title.
Button Action
Pause/ resume play.
Stop play.
Jump to the next title/chapter.
Return to the beginning of the
current title/chapter or jump to
the previous title/chapter.
m M Search backward/ forward.
To change search speed,
press this button repeatedly.
•
v V Slow motion reverse/ forward
play.
To change play speed, press
this button repeatedly.
For VCD, only forward play
is possible.
•
•
Change video play
1 Play a title.
2 Use the remote control to change the
video play.
Button Action
Change audio language.
Only applicable to discs
with multiple audio
language or channel.
•
Change subtitle language.
Only applicable to discs
with multiple subtitle
language.
•
Toggle through various repeat/
shuffl e play mode; or turn off
repeat mode.
Repeat options vary
depending on the disc type.
For VCDs, repeat play is
only possible if the PBC
mode is turned off.
•
•
Zoom in/out.
To pan through the zoomed
image, press the cursor
buttons.
•
Display current play status.
You can change the video
play options here without
interrupting disc play.
•
View DVD play from different
camera angles.
Only applicable to DVDs
that contain sequences
recorded from different
camera angles.
•
English
EN 25
Play
Access DVD menu
1 Press DISC to access disc main menu.
2 Select a play option, then press OK.
In some menus, press number buttons
to input your selection.
To return to the title menu during
playback, press MENU.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in
a VCD, the contents menu is displayed.
1 Press vV to select a play option, then
press OK to start play.
If PBC is off, it skips the menu and starts
play from the fi rst title.
During playback, you can press MENU
to return to the menu (if the PBC
mode is on).
2 To preview the contents of the disc, press
DISC.
To exit the menu, press DISC.
•
•
•
•
•
Select Digest Type:
Track Digest
Disc Interval
Track Interval
[ Track Digest ]
It plays the fi rst few seconds of each track
in a disc.
[ Disc Interval ]
It divides the total disc time by six and
plays the fi rst few seconds of these
intervals.
[ Track Interval ]
It divides the current track by six and plays
the fi rst few seconds of these intervals.
This option is not available in stop
mode.
3 Select a preview play option, then press
OK.
Tips
The default setting for PBC is on. To change the
default setting, see chapter ‘Adjust settings’ -
[ Preferences ] > [ PBC ] for details.
•
•
26 EN
Sync audio output with video play
If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
1 Press and hold AUDIO SYNC until
‘AUDIO SYNC XXX’ is displayed.
‘XXX’ denotes the delay time.
2 Within fi ve seconds, press VOL +- to
set the delay time for audio output.
Note
If the volume control is not used within 5 seconds, it
resumes normal volume control function.
•
•
Quick skip play to a specifi c time
1 During playback, press INFO.
The disc status menu is displayed.
2 Select the current elapsed playing time in
the menu, then press OK.
[ TT Time ] (title time)
[ CH Time ] (chapter time)
[ Disc Time ] (disc time)
[ Track Time ] (track time)
3 Press the number buttons to change the
time where you want to skip to, then press
OK.
Set repeat play for a specifi c section
1 During playback, press REPEAT A-B to set
the starting point.
2 Press M to fi nd the ending point and
REPEAT A-B again
Repeat play starts.
3 To cancel repeat play, press REPEAT A-B.
Note
The marked section for repeat play is only possible
within a track/title.
•
•
•
•
•
English
EN 27
Play
Play DivX® video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
This unit is DivX® Certifi ed so that you can
enjoy DivX video.
1 Insert a disc or USB that contains the DivX
videos.
2 Press DISC or USB.
A contents menu is displayed.
3 Select a title to play, then press u.
4 Use the remote control to control the
title.
Button Action
Change subtitle language.
Change audio language/track.
Stop play.
For DivX Ultra video, press
this button again to display
the contents menu.
•
Display DivX Ultra video
information.
Note
Only those DivX videos that were rented or
purchased using the DivX registration code of this
unit can be played (see chapter ‘Adjust settings’ >
[ General Setup ] > [ DivX(R) VOD Code ] for
details).
If the subtitle does not appear correctly, change the
subtitle language (see chapter ‘Adjust settings’ -
[ Preferences ] > [ DivX Subtitle ] for details).
The subtitle can only be displayed up to an average
of 45 characters.
This unit can play DivX video fi les that are up to 4GB
in size.
•
•
•
•
Play music
Note
For some commercial audio disc, playback may
resume from the point where it was last stopped. To
start play from fi rst track, press í.
•
Control a track
1 Play a track.
2 Use the remote control to control the
track.
Button Action
Pause/ resume play.
Stop play.
Jump to the next track.
Return to the beginning of the
current track or jump to the
previous track.
Direct input the track number.
m M Search backward/ forward.
To change search speed,
press this button repeatedly.
•
Toggle through various repeat/
shuffl e play mode; or turn off
repeat mode.
Repeat options vary
depending on the disc type.
•
28 EN
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio fi le (fi les with .mp3 or .wma extensions).
1 Insert a disc or USB that contains the MP3/
WMA music.
2 Press DISC or USB.
A contents menu is displayed.
3 Select a folder, then press OK.
4 Select a track to play, then press u.
To return to the main menu, press v
until ‘Previous’ folder is selected, then
press OK.
Note
For CDs recorded in multiple sessions, only the fi rst
session is played.
This unit does not support MP3PRO audio format.
If any special characters are present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are
not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on this unit.
Folders/fi les exceed the supported limit of this unit
will not be displayed or played.
•
•
•
•
•
Tips
To display the data disc contents without folders, see
chapter ‘Adjust settings’ - [ Preferences ] >
[ MP3/JPEG Nav ] for details.
•
•
Play photo
Play photos as slideshow
This unit can play JPEG photos (fi les with .jpeg
or .jpg extensions).
1 Insert a disc or USB that contains the JPEG
photos.
2 Press DISC or USB.
For a Kodak disc, the slideshow begins
automatically.
For a JPEG disc, the photo menu is
displayed.
3 Select the folder/album you want to play.
To preview the photos in the folder/
album, press INFO.
To go to previous or next screen
display, press í / ë.
To select a photo, press the cursor
buttons.
To display the selected photo only,
press OK.
4 Press u to start slideshow play.
To return to the menu, press MENU.
•
•
•
•
•
English
EN 29
Play
Note
It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif’
type fi le, the actual thumbnail picture will not be
shown on the display. It will be replaced with a ‘blue
mountain’ thumbnail picture.
This unit can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion
JPEG and pictures in formats other than JPEG, or
sound clips associated with pictures.
Folders/fi les exceed the supported limit of this unit
will not be displayed or played.
•
•
•
•
Control photo play
1 Play photo slideshow.
2 Use the remote control to control the
photo.
Button Action
bSkip to the previous photo.
BSkip to the next photo.
vRotate the photo clockwise.
VRotate the photo anti-
clockwise.
Zoom in/ out.
Play will pause while in
zoom mode.
•
Stop play.
Play musical slideshow
Play MP3/WMA music fi les and JPEG photo
fi les simultaneously to create musical slideshow.
The MP3/WMA and JPEG fi les must be stored
on the same disc or USB device.
1 Play MP3/WMA music.
2 Navigate to the photo folder/album and
press u to start slideshow play.
Slideshow begins and continues till the
end of the photo folder or album.
Audio continues to play till the end of
the disc.
To return to the menu, press MENU.
3 To stop slideshow play, press x.
4 To stop music play, press x again.
•
30 EN
Play from USB device
This unit can only play/view MP3, WMA, DivX
(Ultra) or JPEG fi les that are stored on such
devices.
1 Connect a digital camera that comply with
the PTP standard, USB fl ash drive, or USB
memory card reader to the (USB)
socket on this unit.
2 Press USB.
A contents menu is displayed.
3 Select a fi le to play, then press u.
For more information, see chapters
‘Play music, Play photo, Play video’ for
details.
4 To stop play, press x or remove the USB
device.
Tips
If the device does not fi t into the USB socket,
connect it through a USB extension cable.
If a multiple USB card reader is used, only one of the
connected USB drive contents can be accessed.
If a USB HDD is used, ensure that an auxiliary
power cord connected to the USB HDD for proper
operations.
Digital cameras that use PTP protocol or require
additional programme installation when connected
to a PC are not supported.
•
•
•
•
•
Play from portable media
player
Simply connect your portable media player (e.g.
MP3 player) to this unit to enjoy superb sound
quality from your music collections.
MP3 LINK
1 Connect a 3.5mm stereo audio cable
(supplied) from the MP3 LINK socket on
this unit to the ‘headphone’ socket on your
portable media player.
2 Press AUX / MP3 LINK repeatedly until
‘MP3 LINK’ is displayed.
3 Start play on your portable media player.
See chapter ‘Adjust Sound’ to enhance
the audio output.
4 To stop play, press STOP button on your
portable media player.
Note
Control playback is only possible on your portable
media player.
Stop play on the portable media player before you
switch to other play media/source.
•
•
•
English
EN 31
Play
Play from radio
Check if the FM antenna has been connected
to this DVD Home Theatre unit. If not,
connect the supplied FM antenna to the FM
75Ω socket and fi x its ends to the wall.
Tips
For better FM stereo reception, connect an external
FM antenna (not supplied).
Position the antenna as far away as possible from
your TV, VCR or other radiation source to prevent
interference.
•
•
First time tuning
The fi rst time when you access ‘RADIO’ mode,
follow the instructions to install the radio
stations.
1 Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
2 Press u.
All detected radio stations are stored.
Once complete, it tunes to the fi rst
preset radio station.
To stop auto tuning, press x.
Note
This unit can store up to a maximum of 40 radio
stations.
If auto installation is not activated or less than 5
radio stations are stored, ‘AUTO INSTALL’ will be
displayed again the next time you turn on to radio
mode.
If the FM radio station transmits RDS (Radio Data
System) data, the name of the radio station will be
displayed.
•
•
•
•
32 EN
Listen to radio
1 Press RADIO.
2 Use the remote control to control the
radio.
Button Action
Select a preset radio station.
m M Tune the radio frequency
backward/ forward.
Press and hold this button to
delete the preset station from
the preset list.
The preset number for
other radio stations
remain unchanged.
•
Reinstall all the radio stations
1 Press RADIO.
2 Press and hold PROGRAM until ‘START’ is
displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 stations
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.
•
Search and store radio stations
individually
1 Press RADIO.
2 Press m M.
The radio frequency indication starts to
change until a radio station is detected.
3 Repeat step 2 until you tune to the radio
station you wish to store.
To fi netune the radio frequency, press
vV.
4 Press PROGRAM.
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5 Press í ë (or the number buttons) to
select a preset number to store.
6 Press PROGRAM to confi rm.
•
•
English
EN 33
Adjust sound
6 Adjust sound
Control the volume
1 Press VOL +- to increase or decrease
the volume level.
To mute the volume, press H.
To restore the volume, press H again
or press the volume button.
Select surround sound
1 Press SURROUND repeatedly to select a
best surround output that available on the
disc.
Options Descriptions
DOLBY VS Dolby Virtual surround sound.
STEREO Stereo sound.
•
•
Select a preset sound effect
1 Press SOUND MODES +- repeatedly
to select a sound effect that most suits the
video or music you play.
Video /
Music
Descriptions
CONCERT /
CLASSIC
Flat and pure sound mode.
Ideal for listening to classical
music and watching live
concert DVDs.
DRAMA /
LOUNGE
Moderate sound mode
suitable for lounge music
and watching dramas.
ACTION /
ROCK
Enhanced low and high
range for great sounding
movie effects and
atmosphere. Great for
action movies and rock/pop
music.
GAMING /
SPORTS
Moderate mid range and
surround effects for clear
vocals and the atmosphere
of a live sports venue, also
ideal video gaming.
NIGHT Dynamically controlled
sound mode suitable for
watching movies at night or
for non-intrusive
background music.
lhhdiif
34 EN
7 Adjust settings
This section describes the various setting
options of this unit.
Symbol Options
[ General Setup ]
[ Audio Setup ]
[ Video Setup ]
[ Preferences ]
General setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press B.
3 Select an option, then press OK.
General Setup
Screen Saver
DivX(R) VOD Code
Sleep
Display Dim
Disc Lock
OSD Language
See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
•
•
[ Disc Lock ]
Set play restriction for a specifi c discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
[ Lock ] – restrict access to the current
disc. The next time you want to play
this disc or unlock it, you need to enter
the password.
[ Unlock ] – all discs can be played.
Tips
To set or change your password, go to
[ Preferences ] > [ Password ].
•
[ Display Dim ]
Change the brightness level of the display
panel to suit the lighting in your room.
[ 100% ] – normal brightness.
[ 70% ] – medium brightness.
[ 40% ] – dimmest display. The LEDs
and display icons will not be shown.
[ OSD Language ]
Select the default on-screen menu
language.
[ Screen Saver ]
Turn off or on the screen saver mode. It
helps to protect the TV screen from being
damage due to over exposure to a static
image for too long.
[ On ] – set the screen saver to appear
after 5 minutes of inactivity (for
example, in \pause or stop mode).
[ Off ] – disable screen saver mode.
•
•
•
•
•
•
•
English
EN 35
Adjust settings
[ Sleep ]
Switch to standby automatically after the
preset time.
[ Off ] – disable sleep mode.
[ 15, 30, 45, 60 mins ] – select the
count down time before it switches to
standby.
Tips
You can directly access to sleep timer function by
pressing SLEEP repeatedly on the remote control
until the count down time is displayed on the display
panel.
•
[ DivX(R) VOD Code ]
Display the DivX® registration code.
Tips
Enter this unit’s DivX registration code when you
rent or purchase video from www.divx.com/vod.
The DivX videos rented or purchased through the
DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
•
•
•
Audio setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select [ Audio Setup ], then
press B.
3 Select an option, then press OK.
Audio Setup
HDMI Audio
CD Upsampling
Audio Sync
Speakers Volume
See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
[ Speakers Volume ]
When the speakers are not placed in an
equal distance from the listening position,
change the volume level of the speakers so
that for those placed closer to the listening
position will not sound too loud.
To start, press OK.
Select a speaker in the menu, then
press b B to adjust the volume level.
Press OK to confi rm and exit.
1.
2.
3.
Tips
The test tone is emitted from the speaker while
adjusting volume level.
•
•
•
•
36 EN
[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
[ All ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
[ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
[ CD Upsampling ]
Convert the music CD to a higher
sampling rate using sophisticated digital
signal processing for better sound quality.
[ Off ] – turn off CD-upsampling.
[ 88.2 kHz (X2) ] – convert the
sampling rate of the CDs twice as high
as the original rate.
Note
When you press SURROUND to switch to multi-
channel mode, it automatically turns off the CD-
upsampling feature.
•
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
To start, press OK.
Select a speaker delay in the menu,
then press b B to set the delay time.
Press OK to confi rm and exit.
1.
2.
3.
•
•
•
•
Video setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select [ Video Setup ], then
press B.
3 Select an option, then press OK.
Video Setup
HDMI Setup
TV Display
TV Type
Picture Setting
Progressive
Closed Caption
See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
•
•
English
EN 37
Adjust settings
[ TV Type ]
Change this setting only if the video does
not appear correctly. By default, this
setting matches the most common setting
for TVs in your country.
[ PAL ] – for PAL-system TV.
[ NTSC ] – for NTSC-system TV.
[ Multi ] – for TV that is compatible
with both PAL and NTSC.
[ TV Display ]
Select the screen format according to how
you want the picture to appear on your
TV.
4:3 Letter Box (LB)
4:3 Pan Scan (PS) 16:9 (Wide Screen)
[ 4:3 Pan Scan ] – for standard TV, a
full-height screen display with the sides
trimmed.
[ 4:3 Letter Box ] – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
[ 16:9 Wide Screen ] – for wide-screen
TV (frame ratio 16:9).
[ Progressive ]
If your TV can support progressive signals,
you can activate the progressive scan
mode of this unit.
[ On ] – turn on progressive scan
mode.
[ Off ] – disable progressive scan mode.
Tips
See chapter ‘Get Started - Turn on Progressive Scan’
for detailed information.
•
•
•
•
•
•
•
•
•
[ Picture Setting ]
Select a predefi ned set of picture colour
settings or customise your personal setting.
[ Standard ] – original colour setting.
[ Bright ] – vibrant colour setting.
[ Soft ] – warm colour setting.
[ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, tint and colour saturation in
the menu, then press OK.
[ HDMI Setup ]
When you connect this unit and TV with
HDMI cable, select the best HDMI setup
that your TV can support.
[ Wide Screen Format ] – defi ne the
wide screen format for disc play.
Options Descriptions
[ Superwide ] Centre position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars are
displayed on both sides
of the screen.
[ Off ] Picture will be displayed
according to the format
of the disc.
Note
This setting is only available if you have set the [ TV
Display ] setting to [ 16:9 Wide Screen ].
•
•
•
•
•
•
38 EN
[ HDMI Video ] – select a video
resolution that is compatible with your
TV display capability.
Options Descriptions
[ Auto ] It detects and selects the
best supported video
resolution automatically.
[ 480p, 576p,
720p, 1080i,
1080p ]
Select a video resolution
that best supported by
your TV. See your TVs
manual for details.
Note
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for auto
recover or switch to its default mode as follows:
1) Press Z. 2) Press b. 3) Press ZOOM.
•
[ EasyLink ] – enable all the HDMI CEC
compliant TV/device response or react
to certain commands simultaneously
with one touch control.
Options Descriptions
[ Auto Wake-
up TV ]
It wake-ups your TV
automatically when you
press PLAY to power up
this unit and start disc
play (if a video disc is
found in the disc
compartment).
To disable this feature,
select [ Off ].
•
[ System
Standby ]
Respond to standby
command from other
HDMI CEC compliant
TV/devices.
To disable this feature,
select [ Decline ].
•
•
•
[ System Audio
Control ]
It enables this DVD
Home Theatre unit to
switch automatically to
the audio input of the
active device.
To enable this feature,
select [ On ]. Then
proceed to [ HDMI
Input Mapping ] to
scan and map all the
connected devices.
•
[ HDMI Input
Mapping ]
Map the audio input to
the connected TV/
devices correctly to
enable automatic
switching of input source.
Press OK to start
scanning of devices.
Select the audio input
to map (e.g. AUX,
Coaxial In), then press
B.
Select the correct
device that connected
to this audio input,
then press OK.
1.
2.
3.
Note
Your TV and other connected devices must be
compliant with HDMI CEC.
You must turn on the HDMI CEC operations on
your TV/devices before you can enjoy the EasyLink
controls. See your TVs/devices manual for details.
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
•
•
•
English
EN 39
Adjust settings
[ Closed Caption ]
Turn on or off display captions.
[ On ] – show the sound effects in
subtitle. Only applicable to disc with
Closed Caption information included
and your TV supports this feature.
[ Off ] – disable closed caption.
•
•
Preferences
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select [ Preferences ], then
press B.
3 Select an option, then press OK.
Preferences
Parental
PBC
Disc Menu
Password
DivX Subtitle
Subtitle
Audio
MP3/JPEG Nav
See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
•
•
40 EN
[ Audio ]
Select the default audio language for
DVDs.
[ Subtitle ]
Select the default subtitle language for
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
Note
If the language you have set is not available on the
disc, the disc uses its own default language.
For some DVDs, the subtitle/audio language can only
be changed from the disc menu.
To select the languages that are not listed in the
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective 4-digit language code.
•
•
•
[ Parental ]
Restrict access to DVDs that are unsuitable
for your children. These types of DVDs
must be recorded with ratings.
To start, press OK.
Select a rating level in the menu, then
press OK.
Press the number buttons to enter
your 6-digit password.
1.
2.
3.
Note
Rated DVDs above the level you set in [ Parental ]
require a password to be played.
The ratings are country-dependent. To allow all discs
to play, select ‘8’.
Some DVDs have ratings printed on them but are
not recorded with ratings. This function has no
effect on such DVDs.
•
•
•
Tips
To set or change your password, go to
[ Preferences ] > [ Password ].
•
[ PBC ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
[ On ] – an index menu is displayed
when you load a disc for play.
[ Off ] – skip the menu and start play
from the fi rst title.
[ MP3/JPEG Nav ]
Turn off or on MP3/WMA folder display
when you play a media that contains MP3/
WMA fi les.
[ Without Menu ] – display all the fi les.
[ With Menu ] – display the folders of
MP3/WMA fi les.
[ Password ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Old Password
New Password
Confirm PWD
OK
Change Password
Press the number buttons to enter
‘136900’ or your last set 6-digit
password at [ Old Password ] fi eld.
Enter the new password at [ New
Password ] fi eld.
Enter the new password again at
[ Confi rm PWD ] fi eld.
Press OK to exit the menu.
1.
2.
3.
4.
Note
If you forget your 6-digit password, enter ‘136900’
before you set a new password.
•
•
•
•
•
English
EN 41
Adjust settings
[ DivX Subtitle ]
Select a character set that supports the
DivX subtitle.
[ Standard ] English, Irish, Danish,
Estonian, Finnish, French,
German, Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
[ Central
Europe ]
Polish, Czech, Slovak,
Albanian, Hungarian,
Slovene, Croatian, Serbian
(Latin script), Romanian
[ Cyrillic ] Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian
[ Greek ] Greek
[ Hebrew ] Hebrew
[ Chinese
(Simp) ]
Simplifi ed Chinese
[ Korean ] Korean
Note
Ensure that the subtitle fi le has the exact same fi le
name as the movie fi le. If for example the fi lename of
the movie is ‘Movie.avi’, then you will need to name
the text fi le ‘Movie.sub’ or ‘Movie.srt’.
•
[ Default ]
Reset all the settings of this unit to factory
default, except for [ Disc Lock ],
[ Password ] and [ Parental ] settings.
[ Version info ]
Display the software version of this unit.
Tips
This information is required when you want to fi nd
out if a newest software version is available at the
Philips website that you may download and install on
this unit.
•
42 EN
8 Additional
information
Update software
Philips provides software updates to ensure that
this unit is compatible with the newest formats.
To check for updates, compare the current
software version of this unit with the latest
software version available at the Philips website.
1 Press OPTIONS, .
Preferences
Parental
PBC
Disc Menu
Password
DivX Subtitle
Version Info
Default
MP3/JPEG Nav
2 Select [ Preferences ] > [ Version Info ],
then press OK.
3 Write down the version number, then
press OPTIONS to exit the menu.
4 Go to www.philips.com/support to check
the latest software version available for this
unit.
5 If the latest software version is higher than
the software version of this unit, download
it and store onto a CD-R or USB fl ash
drive.
6 Insert the CD-R or USB fl ash drive to this
Home Theatre unit.
7 Press DISC or USB, then follow the
instruction on the TV to confi rm update
operation.
Note
Do not remove the CD-R or USB when software
updating is in progress.
•
8 Once software update is complete, this
unit turns off to standby automatically.
Note
We recommend that you disconnect the power cord
for a few seconds and connect again to reboot the
system.
•
Care
Caution!
Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static sprays
intended for discs.
•
Clean discs
Wipe the disc with a micro fi bre cleaning cloth
from the centre to the edge in a straight line
movement.
Clean main unit screen
Wipe the screen surface with a micro fi bre
cleaning cloth.
English
EN 43
Additional information
Specifi cations
Note
Specifi cation and design are subject to change
without notice.
•
Accessories supplied
Quick Start Guide
Remote control and batteries
Scart converter cable
Interconnect cable (connect between main unit and
subwoofer)
Audio cable
3.5mm stereo audio cable (for MP3 LINK)
Power cable
Subwoofer
2 speakers
Table stand (for main unit)
FM wire antenna
Micro fi bre cleaning cloth
Mounting guide
Amplifi er
Total output power (Home Theatre): 300W
Frequency response: 180 Hz~18 kHz / ±3dB
Signal-to-noise ratio: > 60 dB (A-weighted)
Input sensitivity
AUX: 600 mV
MP3 LINK: 700 mV
Disc
Laser Type: Semiconductor
Disc diameter: 12cm / 8cm
Video decording: MPEG1/ MPEG2 / DivX / DivX Ultra
Video DAC: 12 bits, 108 MHz
Signal system: PAL / NTSC
Video S/N: 56 dB
Audio DAC: 24 bits / 96 kHz
Frequency response: 4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 44 kHz (96 kHz)
PCM: IEC 60958
Dolby Digital, DTS: IEC60958, IEC61937
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Radio
Tuning range: FM 87.5-108 MHz (50 kHz)
26dB quieting sensitivity: FM 20 dBf
IF rejection ratio: FM 60 dB
Signal-to-noise ratio: FM 60 dB
Harmonic distortion: FM 3%
Frequency response: FM 180 Hz - 10 kHz /±6dB
Stereo separation: FM 26 dB (1 kHz)
Stereo Threshold: FM 23.5 dB
USB
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Power (Subwoofer)
Power supply: 220-240V~50 Hz
Power consumption: 75 W
Standby power consumption: < 1 W
System: Bass Refl ex System
Impedance: 8 ohm
Speaker drivers: 165 mm (6 1/2”) woofer
Frequency response: 55 Hz - 150 Hz
Dimensions (WxHxD): 202 x 300 x 380 (mm)
Weight: 5.55 kg
Main unit
Dimensions (WxHxD): 315 x 199 x 106 (mm)
Net Weight: 1.7 kg
Speakers
System: full range satellite
Speaker impedance: 4 ohm/channel
Speaker drivers: 3”woofer + 0.8” tweeter
Frequency response: 150 Hz - 20 kHz
Dimensions (WxHxD): 180 x 199 x 106 (mm)
Weight: 1.1 kg
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
44 EN
9 Troubleshooting
Main unit
The buttons on this unit do
not work.
Disconnect this unit from the power outlet for a few minutes,
then connect again.
Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theatre unit.
•
•
Picture
No picture. See TVs manual for correct video input channel selection.
Change the TV channel until you see the DVD screen.
Press DISC.
If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
Press Z to open the disc compartment.
Press b.
Press AUDIO SYNC (for progressive scan) or SUBTITLE
(for TV Type).
•
•
•
1.
2.
3.
No picture on HDMI
connection.
Check if the HDMI cable is faulty. Replace a new HDMI cable.
If this happens when you change the HDMI video resolution,
you have to switch to its default mode:
Press Z to open the disc compartment.
Press b.
Press ZOOM.
•
•
1.
2.
3.
Warning!
Risk of electric shock. Never remove the casing of
this unit.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
English
EN 45
Troubleshooting
Sound
No sound. Ensure that the audio cables are connected and press the
correct input source (for example, AUX/MP3 LINK, USB) to
select the device you want to play.
•
No sound on HDMI
connection.
You may not hear any sound from the HDMI output if the
connected device is non-HDCP compliant or only DVI-
compatible.
Ensure that the [ HDMI Audio ] setting is turned on.
•
•
No sound from TV
programme.
Connect an audio cable from the AUDIO input on this unit to
the AUDIO output on your TV. Then press AUX/MP3 LINK
repeatedly to select the corresponding audio input source.
•
Play
DivX video fi les cannot be
played.
Ensure that the DivX fi le is encoded according to the ‘Home
Theatre Profi le’ with the DivX encoder.
Ensure that the DivX video fi le is complete.
•
•
The aspect ratio of the
screen is not aligned with
the TV display setting.
The aspect ratio is fi xed on the DVD.•
DivX subtitle are not
displayed correctly.
Ensure that the subtitle fi le name is the same as the movie fi le
name.
Select the correct character set.
Press OPTIONS.
Press B, then select [ DivX Subtitle ] in the menu.
Select the character set that supports the subtitle.
•
•
1.
2.
3.
The contents of the USB
fl ash drive cannot be read.
The USB fl ash drive format is not compatible with this unit.
Drive is formatted with different fi le system which is not
supported by this unit (e.g. NTFS).
Maximum size of memory supported is 160GB.
•
•
•
46 EN
10 Glossary
Aspect ratio
Aspect ratio refers to the length to height ratio
of TV screens. The ratio of a standard TV is
4:3, while the ratio of a high-defi nition or wide
TV is 16:9. The letter box allows you to enjoy
a picture with a wider perspective on a standard
4:3 screen.
DivX
The DivX code is a patent-pending, MPEG-4
based video compression technology,
developed by DivX Networks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining
high visual quality.
Dolby Digital
A surround sound system developed by Dolby
Laboratories containing up to six channels of
digital audio (front left and right, surround left
and right, centre and subwoofer).
HDMI
High-Defi nition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high defi nition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
HDCP
High-bandwidth Digital Content Protection is a
specifi cation that provides a secure transmission
of digital contents between different devices (to
prevent unauthorised copyright).
JPEG
A very common digital still picture format. A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite
of its high compression ratio. Files are
recognised by their fi le extension ‘JPG or JPEG’.
MP3
A fi le format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer3. By using the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD. Files are recognised by their
fi le extension ‘.MP3’.
MPEG
Motion Picture Experts Group. A collection of
compression systems for digital audio and
video.
PBC
Playback Control. A system of navigating a
Video CD/Super VCD through on-screen
menus recorded onto the disc. You can enjoy
interactive playback and searching.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Progressive Scan
The progressive scan displays twice the number
of frames per seconds than ordinary TV system.
It offers higher picture resolution and quality.
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player
version 9 or Windows Media Player for
Windows XP. Files are recognised by their fi le
extension ‘WMA’.

Navigation menu