Philips MNT208 M8000 9490B User Manual Installation Note For M8040A #A02 HCMNT208 A02

MNT219 Product Brochure Philips IntelliVue MP2/X2 Mounting solution c6638ea2ebca465db07ca77c015e0897 Philips - IntelliVue MP2/X2 Philips Pole Mount Mounting solutionMNT219

User Manual: Philips MNT208 Installation Note for M8040A #A02 IntelliVue MP2/X2 Philips Wall Mount Mounting solutionMNT208

Open the PDF directly: View PDF PDF.
Page Count: 6

Philips IntelliVue Family and M3/M4 Patient Monitors
Multi Measurement Module
Mounting Installation Note
P
AD
Attach the universal mounting clamp to the multi-measurement module (MMS) mount and then mount the
MMS cable in the MMS clamp according to the following instructions to ensure that cable is attached
permanently. Do not remove the MMS cable from the MMS clamp.
mount with MMS clamp - rear view
(without universal mounting clamp handle)
mount with MMS clamp -
(with universal mounting clamp handle)
front view
1.Attach the universal mounting clamp to
the mount with two M4x16 screws either
in horizontal or vertical position to suit
your installation.
To install the multi measurement module:
2.Place the cable (1) on the clamp (2), as
shown in the picture. Use the visual guide
(3) and the positioning notch (4) to
ensure you have the cable correctly
positioned. 1
2
3
4
3.Squeeze the side clips (1) open slightly
and ease the cable into the clamp so that
the clips grip the gray pillars (2).
4.Press the cable down firmly to ensure that
it is fully seated in the clamp.
1
2
5.Align the feet on the MMS with the
locating shoes (1) on the mounting plate
and slide the MMS onto the mounting
plate. 1
1
6.Ensure that the cable is securely fixed to
the MMS. Once fixed, do not remove
the cable from the MMS clamp.
Replacement Part Installation Instructions
M8000-60012 kit contains:
• 1 x MMS MSL (Multi Measurement Module
Measurement Link) clamp.
•1 x Screw
• 1 x Installation Note
Tool required: Torx T10 screwdriver (not included).
Before mounting the multi measurement
module onto the mounting plate, you must
first screw the clamp to the mounting
plate, using a Torx T10 screwdriver.
United States:
Philips Medical Systems
Cardiac and Monitoring Systems
3000 Minuteman Road
Andover, MA 01810
(800) 934-7372
Canada:
Philips Medical Systems Canada
281 Hillmount Road
Markham, ON
L6C 2S3
(800) 291-6743
Europe, Middle East and Africa:
Philips Medizin Systeme Böblingen GmbH
Cardiac and Monitoring Systems
Hewlett-Packard Str. 2
71034 Böblingen
Germany
Fax: (+49) 7031 463 1552
Latin America Headquarters:
Philips Medical Systems
1550 Sawgrass Corporate Parkway #300
Sunrise, Fl 33323
Tel: (954) 835-2600
Fax: (954) 835-2626
Asia Pacific Headquarters:
Philips Medical Systems
30/F Hopewell Centre
17 Kennedy Road
Wanchai
Hong Kong
Tel: (852) 2821 5888
Fax: (852) 2527 6727
© 2007 Koninklijke Philips Electronics NV
All rights are reserved.
Feb 2007
M8000-9490B
4512 610 20651
*M8000-9490B*
Philips Medical Systems is part of
Royal Philips Electronics
INTERESTED?
Would you like to know more about our
imaginative products? Please do not hesitate to
contact us. We would be happy to provide specific
information about our products and services, or
put you on our mailing list for news about new
product developments, upcoming events or for our
clinical journal, MedicaMundi. We would be glad
to hear from you.
On the web
Contact us through our web site:
www.medical.philips.com
Via e-mail
Our e-mail for all remarks and requests is:
medical@philips.com
By fax
We can be reached at the following fax number:
+31 40 27 64 887
By postal service
Please write to us at the following address:
Philips Medical Systems
Global Information Center
I.B.R.S. / C.C.R.I. Numéro 11088
5600 VC Eindhoven
Pays-Bas / The Netherlands
(no stamp required)
S

Navigation menu