Philips 55Pfl3907 F7 Owner S Manual
www.philips.com/support 55pfl3907_f7_dfu_aen
55PFL3907/F7 Mode d’emploi 55pfl3907_f7_dfu_aen Téléviseur ACL série 3000 55PFL3907/F7 | Philips55PFL3907/F7
2014-12-13
: Philips Philips-55Pfl3907-F7-Owner-S-Manual philips-55pfl3907-f7-owner-s-manual philips pdf
Open the PDF directly: View PDF .
Page Count: 54
- 1 Notice
- 2 Important
- 3 Your TV
- 4 Get started
- 5 Use your TV
- 6 Use more of your TV
- Access TV menu
- Philips Wireless MediaConnect
- View photos, play music and watch videosusing DLNA
- Net TV
- Enjoying vTuner
- Pandora® operations
- Using Twitter
- Changing picture and sound settings
- Create and use lists of favorite channels
- Setting the clock
- Closed caption
- Sleeptimer
- Child and rating locks
- Use Philips EasyLink
- EasyLink
- Set your location to home
- Network
- View photos, play music and watch videos ona USB storage device
- 7 Install channels
- 8 Update your TV software
- 9 Connect devices
- 10 Troubleshooting
- 11 Specifications
- 12 Warranty
- 13 Index
- License
![](asset-1.png)
Register your product and get support at
www.philips.com/support
55PFL3907
MODEL NUMBER SERIAL NUMBER
EN User Manual
FR Manuel d’Utilisation
ES Manual del Usuario
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips
Customer Care Center at 1 866 309 0843
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
Enter below the model and serial numbers located on the back and right side of the TV cabinet.
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
• Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1 866 309 0843
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00
Entrer ci dessous le modèle et le numéro de série situés dérrière à droite sur le dos du téléviseur.
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
• Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes
de los Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1 866 309
0843
• Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA.
01 800 504 62 00 Solo Para México.
Escriba a continuación el modelo y número de serie que estan localizados en lado derecho y parte
posterior de el gabinete de el televisor.
![](asset-2.png)
1
EnglishFrançaisEspañol
EN
Contents
1 Notice 4
2 Important 5
Product information 5
Screen care 5
Environmental care 5
Regulatory notices 5
3 YourTV 6
Side controls and indicators 6
Remote control 6
4 Getstarted 8
Supplied accessories 8
Mounting stand onto TV 8
Positioning the TV 8
Installing the remote control batteries 8
Connecting the antenna or cable 9
Managing cables 10
Connecting the AC power cord 10
Switching on and initial setup 11
5 UseyourTV 12
Switching on your TV and putting it in standby mode 12
Switching channels 12
Adjusting volume 13
Watching channels from a set-top box 13
Watching connected devices 13
Watching a Blu-ray disc 13
6 UsemoreofyourTV 14
Access TV menus 14
Philips Wireless MediaConnect 15
View photos, play music and watch videos using DLNA 15
Net TV 17
Enjoying vTuner 17
Pandora® operations 19
Using Twitter 20
Changing picture and sound settings 22
Create and use lists of favorite channels 24
Setting the clock 25
Closed caption 25
Sleeptimer 26
Child and rating locks 26
Use Philips EasyLink 29
EasyLink 29
Set your location to home 30
Network 30
View photos, play music and watch videos
on a USB storage device 33
7 Installchannels 35
Selecting your menu language 35
Autoprogram 35
Weak channel installation 35
Installation mode 35
Uninstall channels 35
Return your settings to default values 35
8 UpdateyourTVsoftware 36
Checking your current software version 36
Preparing for the software update by USB 36
Updating software 36
9 Connectdevices 38
Connection overview 38
Selecting your connection quality 39
Connecting your devices 39
Add devices 42
Remove devices 42
10 Troubleshooting 43
Downloading an electronic copy 43
Contact us 43
11 Specications 44
12 Warranty 45
13 Index 46
License end of book
Note:IndividualmenuitemsintheTVaredynamicandwillchangebased
ontypeofinputmedia,optionsenabled/disabled,andsomeotherfactors
suchastheversionofthesoftwareinstalledontheTV.
![](asset-3.png)
2
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete
and return your Product Registration Card at once, or register online at www.philips.com/support to ensure:
Visit our World Wide Web Site at http://www.philips.com/support
Know these
safetysymbols
CAUTION
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For the
safety of everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely to
prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu’au fond.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
*Product Safety Notification *Additional Benefits
By registering your product, you'll receive notification
- directly from the manufacturer - in the rare case of
a product recall or safety defect.
Registering your product guarantees that you'll
receive all of the privileges to which you're
entitled, including special money-saving offers.
Return your Product Registration Card or register online at
www.philips.com/support today to get the very most from your purchase.
EN
![](asset-4.png)
3
EnglishFrançaisEspañol
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org.
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.
• Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antenna-
discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
21. Objects and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with
liquids, such as vases should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - alignment as marked on the
unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.
• Batteries (battery pack or battery installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
this reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)
Note to the CATV system installer:
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
NEC SECTION 810-20)(
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
EN
![](asset-5.png)
4
Canadian notice
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
The following FCC/IC RSS-Gen is description of USB
Wireless LAN adapter.
FCC Caution: Any changes or modications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Country Code Statement
For product available in the USA market, only channel 1~11 can be
operated. Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements, use
only belt-clips, holsters or similar accessories that do not contain
metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.
FCC Radiation Exposure Statement
This equipment is compliance with SAR for general population/
uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been
tested in accordance with the measurement methods and procedures
specied in OET Bulletin 65 Supplement C. This equipment should
be installed and operated with minimum distance 2.5cm between the
radiator & your body.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
is a trademark of SRS Labs, Inc. TruSurround
HD technology is incorporated under license from
SRS Labs, Inc.
SRS TruSurround HD™ creates an immersive,
feature-rich surround sound experience from two
speakers, complete with rich bass, high frequency
detail and clear dialog.
The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DLNA®, the DLNA Logo and DLNA CERTIFIED®
are trademarks, service marks, or certication marks
of the Digital Living Network Alliance.
Netix and the Netix logo are trademarks or
registered trademarks of Netix, Inc.
Film Fresh and the Film Fresh logo are
registered trademarks of Film Fresh
Inc.
VUDU™ is a trademark of VUDU, Inc.
YouTube and the YouTube logo are trademarks of
Google Inc.
1 Notice
Specications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
P&F USA reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of
the system. If the product, or its individual modules or procedures, are
used for purposes other than those specied herein, conrmation of
their validity and suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents. No further
warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the content
in this document. Errors reported to P&F USA will be adapted and
published on the P&F USA support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to
the inside of the product. Repairs may only be done by Service Centers
and ofcial repair shops. Failure to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in this manual, any adjustments, or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
Trade Name : PHILIPS
Responsible Party : P&F USA, Inc.
Model : 55PFL3907
Address : PO Box 2248, Alpharetta, GA 30023-2248
U.S.A.
Telephone Number : 1 866 309 0843
Modications
This apparatus may generate or use radio frequency energy. Changes or
modications to this apparatus may cause harmful interference unless
the modications are expressly approved in the manual. The user could
lose the authority to operate this apparatus if an unauthorized change or
modication is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
EN
![](asset-6.png)
5EN
EnglishFrançaisEspañol
• Clean the TV screen and frame with a soft cloth. Never use substances
such as alcohol, chemicals or household cleaners on the TV screen.
• Risk of damage to the TV screen! Never touch, push, rub or strike
the screen with any object.
• To avoid deformations and color fading, wipe off water drops as
soon as possible.
Environmentalcare
The packaging of this product is intended to be recycled. Contact your
local authorities for information about how to recycle the packaging.
For product recycling information, please visit - www.recycle.philips.com
Endoflifedirectives
This LCD TV contains a lamp with Mercury, please dispose of according
to all local, state and federal laws.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposalofusedbatteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Regulatorynotices
Warning
To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or
moisture. Objects lled with liquids, such as vases, should not be placed on this apparatus.
Caution
To prevent electric shock, match the wide blade of the plug to the wide slot, fully inserted.
Do not place the unit on the furniture that is capable of being tilted by a child
and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or not in use.
The AC plug shall remain readily available.
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CloudTV™ (CloudTV™ by ActiveVideo®)
technology provided under license from
ActiveVideo Networks, Inc. U.S. and Foreign
Patents apply. CloudTV™ and the “CloudTV™”
logo are proprietary trademarks of ActiveVideo
Networks, Inc.
PANDORA, the PANDORA logo, and the
Pandora trade dress are trademarks or registered
trademarks of Pandora Media, Inc. Used with
permission.
Twitter is a trademark of Twitter, Inc.
vTuner is a trademark of Nothing Else Matters
Software, Ltd.
® Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
2 Important
Registering your model with Philips makes you eligible for all of the
valuable benets listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or register
online at www.philips.com/support to ensure :
• Product Safety Notication
By registering your product you receive notication - directly from the
manufacturer - in the rare case of a product recall or safety defect.
• Additional Benets of Product Ownership
Registering your product guarantees that you receive all of the
privileges to which you’re entitled, including special money-saving
offers.
Forfurtherassistance
For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin
Islands, contact Philips Customer Care Center at 18663090843
Productinformation
This TV consumes minimal energy in standby mode to minimize
environmental impact. The active power consumption is given on the type
plate at the back of the TV. The model and serial numbers of your TV can
be found on the back and right side of the TV as well as on the packaging.
Screencare
• Avoid stationary images as much as possible. Stationary images
are images that remain on-screen for extended periods of time.
Examples include : on-screen menus, black bars and time displays.
If you must use stationary images, reduce screen contrast and
brightness to avoid screen damage.
• Unplug the TV before cleaning.
![](asset-7.png)
6
Remotecontrol
b
c
a
d
e
h
o
p
q
r
i
j
k
m
n
l
g
f
3 YourTV
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/support
Sidecontrolsandindicators
f
e
d
c
ab
a Ambientlightsensor
Adjusts backlight for the best picture quality by dynamically
adjusting the backlight intensity in accordance with lighting
condition in the room when [Activecontrol] is set to
[OnwithLightSensor]. Please ensure the room lighting is stable
and the light sensor is not blocked.
b Standbyindicator/Remotecontrolsensor
c.POWER
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
d CHANNEL+/−
Switches to the next or previous channel.
e SOURCE
Selects connected devices.
f VOLUME+/−
Increases or decreases volume.
EN
![](asset-8.png)
7
EnglishFrançaisEspañol
q AUTOMODE
Cycles through preset picture and sound settings.
(See ‘Using auto mode’ on page 24.)
r OPTIONS
Displays a list of menu items applicable to the highlighted object or
screen.
a.(standby-On)
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
b FAV
Displays a list of all channels marked as favorite.
(Includes subchannels)
c SLEEP
Sets a delay after which the TV switches to standby.
d Colorbuttons(red/green/yellow/blue)
Selects tasks or options.
e SOURCE
Selects connected devices.
f NETTV
Displays the Net TV menu.
g OK
Activates a selection or accesses the menu.
hÎïÍÆ(navigationbuttons)
Navigates through the menus.
i INFO
Displays information about the TV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster. You might see a difference in broadcast time if the
broadcast is from a different time zone.
j EasyLinkbuttons
¢(backward)
Searches backward.
∫
(forward)
Searches forward.
Æ∆
(play/pause)
Starts, pauses or resumes playback.
·(record)
Starts or stops video recording.
Ê(stop)
Stops playback.
k CH+/−
Switches to the next or previous channel.
Numberbuttons
Select a channel, page, setting or input characters.
•
(Dot)
Press the dot (•) for digital channels.
PREV.CH
Returns to the previously viewed channel.
l FORMAT
Selects a picture format. (See ‘Changing picture format’ on page 23.)
m VOL+/−
Increases or decreases volume.
n MUTE
Mutes or unmutes audio.
o BACK
Returns to a previous screen.
p MENU/EXIT
Toggles the home menu on or off.
EN
![](asset-9.png)
8
PositioningtheTV
Warning
• Do not insert the AC power cord into the power socket outlet before all the
connections are made.
• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
• Before you move the TV, disconnect attached cables to prevent damage to connectors.
In addition to reading and understanding safety instructions, consider
the following before positioning your TV :
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its screen size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
UsingaKensingtonlock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
Installingtheremotecontrolbatteries
1 Slide the battery cover off the back of the remote control.
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of time.
4 Getstarted
Suppliedaccessories
• Remote Control
• 2 x AAA, 1.5V Batteries
• M5 x 20 double sems screw x 4
• AC Power cord
• Cable management tie
• User Manual
• Quick Start Guide
• Box-inserts
MountingstandontoTV
Applicable to TVs without mounted stands.
1
2
x 4
Note
• To wall mount the TV, refer to the Quick Start Guide.
• If you lose the stand mounting screws, please purchase 4 Phillips head screws (M5x20
) at your local store.
EN
![](asset-a.png)
9
EnglishFrançaisEspañol
Ifyouconnectaset-topboxthroughRFIN/OUT
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3 or 4, or to the channel
specied by the service provider.
OUT
IN
IN
IN
set-topbox
RFcable
antenna
Ifyouconnectaset-topboxthroughHDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct HDMI source by using SOURCE on this
unit's remote control.
OUT
ININ
HDMI
HDMI
OUT
IN
set-topbox
RFcable
Ifyouconnectaset-topboxthroughcomponentvideoinput
If the TV is connected to a cable box or satellite set-top box via
component video input, make sure you select the correct component
video source by using SOURCE on this unit's remote control.
IN
OUT
OUT
YPbPr
OUT
IN
IN
set-topbox
RFcable
audioL/R
Connectingtheantennaorcable
OUT
IN
IN
RFcable
cable
antenna
Ifyouconnecttoanantenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
The TV produces stereo sound only if a stereo signal is broadcast.
Ifyouconnecttoacable
When your TV is connected to the cable socket, you might receive free
digital and high denition programs (depending on your cable provider).
The channel number for digital and high denition channels includes a
dot “•”. For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
IfyouconnecttoaDBS(DirectBroadcastSatellite)
There are two main DBS systems : DirecTV and DishNetwork. These
systems require a separate, proprietary set-top box to decode signals
and send them to the TV. The set-top box contains a digital TV tuner for
receiving off-air digital broadcasts.
Contact your local DBS provider for more information about the
connections and the TV channels.
Ifyouconnecttoaset-topbox
A cable box or satellite set-top box can be connected to the TV
through the following connections :
• ANT
• A/V (Composite Video and Audio)
• YPbPr (Component Video Input)
• HDMI
For information about how to connect a set-top box, see the Quick
Start Guide provided.
EN
![](asset-b.png)
10
ConnectingtheACpowercord
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
TV. Do not insert the AC power cord if the voltage is different.
1 Locate the power connector at the back of the TV. The location of
the power connector varies according to TV model.
2 Insert the AC power cord fully into the power connector.
3 Connect the AC power cord plug to the power outlet. Ensure that
the cord is tightly secured at both ends.
DisconnecttheTVfromthepoweroutlet
Caution
• Pull the AC power cord by the plug; do not pull on the AC power cord.
1 Unplug the AC power cord from the power outlet.
2 Unplug the AC power cord from the power connector at the back
of the TV.
Managingcables
Route your antenna cable and all other cables through the cable
management tie at the back of the TV. The holder helps keep your
cables tidy and easily manageable.
1 Attach the cable management tie as illustrated below.
2 Pass cables through the cable management tie to avoid tangles.
EN
![](asset-c.png)
11
EnglishFrançaisEspañol
You must set [Home]. Otherwise, personalized picture and sound
settings will not be memorized after the unit goes to standby mode.
• Select [Retail store], the unit will be set up with predened setting
for retail displays.
• Select [Home], the unit will be set to maximize energy efciency.
Picture and sound settings can be adjusted and saved as per your
personal preferences.
Press Í /Æ to select [ Start], then press OK to begin [ Settings assistant].
Settings assistant will allow you to customize your picture settings to
your personal preference. You will see a series of test pictures where
the right side and left side differ. Select the side that is most pleasing to
you with the Left/Right buttons.
Cancel Start
Select [ Picture A] or [ Picture B] by pressing Í /Æ that is the most
pleasing to you, then press OK. You see 5 different pictures to be
completed.
Cancel Picture A Picture B
Which side of the picture do you prefer?
Press Í /Æ to select [ Store], then press OK.
Cancel Store
Store your preferences.
Press OK to nish [ Settings assistant].
Exit
The TV has learned your preferences.
Press Í /Æ to select [ Finish], then press OK.
Finish the Setup.
Note
• If you are not receiving a signal from your cable service, contact the CATV provider.
• If you press . during autoprogram, an installation will be canceled except the
language selection.
• The initial autoprogram function can be executed for either [Antenna] or [Cable]
only once. When you change the connection (Antenna / Cable), set autoprogram again.
(Refer to page 35.)
Switching on and initial setup
Before you switch on the TV, check that the AC power cord is properly
connected. Press . POWER at the right side of the TV, or press
. (standby-On) on the remote control. The TV normally takes 25-30
seconds to start up and the following screen appears the rst time you
turn on the TV.
After you read a welcome screen, follow the on-screen instructions
to select your language and complete your TV setup. Installation takes
approximately 20 minutes.
Select your menu
language with the
Up/Down buttons on
your remote control,
press the OK button to
proceed.
English
Français
Español
Network setup screen will appear. Use Î /ï/Í /Æ to select [Next] >
[Wireless] / [Wired], then press OK.
• If you select [Wireless], use Î /ï to select a setting and then press
OK.
Setting items Description
Easy connect
Select this setting if your router has a Wi-Fi
Protected Setup (WPS) button. Start scanning
for wireless networks on the TV after pressing
the WPS button on your router. If connection
test fails, refer to the router's manual for more
details.
Scan
Search for wireless networks automatically
and select the wireless network name (SSID)
from the list. see ‘Wireless network setting
(Auto)’on page 30.
• If you select [Wired], use Î /ï to select a setting and then press
OK.
Connection test will start automatically. (See ‘Connection test’ on page 30.)
Press Î /ï to select the desired mode for energy saving, then press OK.
Retail store
Home
"Home" is recommended for
normal home use.In the Retail
Store mode all settings are
fixed.
Select [Retail store] if you want backlight to be brighter.
Select [Home] to reduce power consumption.
EN
![](asset-d.png)
12
Switchingchannels
Press CHANNEL+/− on the side of the TV.
• Press CH+/− or enter a number on the remote control.
For digital channels, press a number (1 to 999) followed by a dot
“•” and then the corresponding sub channel number (1 to 999).
e.g. 108.30.
• Press PREV.CH to return to the previously viewed channel.
5 UseyourTV
This section helps you perform basic TV operations.
SwitchingonyourTVandputtingitin
standbymode
Toswitchon
• Press . POWER at the side of the TV or press .(standby-On)
on the remote control.
Toswitchtostandby
• Press . POWER at the side of the TV or press .(standby-On)
on the remote control again.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
EN
![](asset-e.png)
13
EnglishFrançaisEspañol
1 Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2 Use the remote control of your set-top box to select channels.
Watchingconnecteddevices
Towatchconnecteddevices
1 Switch on the connected device.
»The picture from your connected device might appear
automatically on the TV screen.
2 Use the remote control of the device to select channels.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2 Use the remote control of the device to select channels.
AutomaticPowerShutOff
If there is no input signal and no operation for 15 minutes, the unit will
turn off automatically.
WatchingaBlu-raydisc
TowatchaBlu-rayDisc
1 Insert a Blu-ray Disc into your player.
2 Press ►(play) on the remote control of the Blu-ray Disc player.
»The Blu-ray Disc might automatically play on the TV.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2 Use the remote control of the Blu-ray Disc player to play the disc.
Adjustingvolume
Toincreaseordecreasevolume
• Press VOL+/− on the remote control or press VOLUME+/− on
the side of the TV.
Tomuteorunmutesound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again or VOL+/− to recover the original sound.
Watchingchannelsfromaset-topbox
Towatchchannelsfromaset-topbox
1 Switch on the set-top box.
»The picture from your set-top box might appear automatically
on the TV screen.
2 Use the remote control of your set-top box to select channels.
Ifthepicturedoesnotappear
EN
![](asset-f.png)
14
Lockorunlockyourdevicefromthehomemenu
This section describes how to lock or unlock specied device.
1 Press MENU on the remote control.
2 Use Î /ï/Í /Æ to select a device to lock or unlock.
3 Press OPTIONS on the remote control.
4 Use Î /ï to select [Devicelock] or [Deviceunlock], then press OK.
• If device lock is unlocked, [Devicelock] will be displayed.
If device lock is locked, [Deviceunlock] will be displayed.
• When device lock is locked, will be displayed at the top
right of the device icons.
5 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
• Once you have set PIN, PIN input menu does not appear after
the unit is turned on.
EnableordisableRCkeyforwardingfromthehomemenu
This section describes how to enable or disable RC key forwarding for a
particular device.
1 Press MENU on the remote control.
2 Use Î /ï/Í /Æ to select a device to enable or disable
RC key forwarding.
3 Press OPTIONS on the remote control.
4 Use Î /ï to select [EnableRCkeyforwarding] or [DisableRC
keyforwarding], then press OK.
• If RC key forwarding is set to off, [EnableRCkeyforwarding]
will be displayed. If RC key forwarding is set to on, [Disable
RCkeyforwarding] will be displayed.
• When you set RC key forwarding on, will be displayed at
the top left of the device icons.
Note
• This function is available only when your devices are connected to this unit
through HDMI cables and assigned to an HDMI port (HDMI1 to HDMI4) with
[Addnewdevices] in the home menu.
6 UsemoreofyourTV
AccessTVmenus
Menus help you to install channels, change picture and sound settings
then access other features.
Accessthehomemenu
The home menu gives you easy access to connected devices, picture
and sound settings as well as other useful features.
1 Press MENU on the remote control.
Watch TV Browse USB Browse PC
Net TV Add new devices Setup
2 Use Î /ï/Í /Æ to select and navigate through one of the following
menus.
• [WatchTV] Switches back to the antenna source if another
source is selected.
• [BrowseUSB] Accesses USB menus.
• [BrowsePC] Accesses DLNA menus.
• [NetTV]Accesses Net TV menus.
• [Addnewdevices] Adds new devices to the home menu.
• [Setup] Accesses menus that allow you to change picture,
sound and other TV settings.
3 Press OK to conrm your choice.
4 Press MENUto exit.
Tip
• After selecting [Addnewdevices], follow the on-screen instructions to select the
correct device and connector.
EN
![](asset-10.png)
15
EnglishFrançaisEspañol
View photos, play music and watch videos
using DLNA
On your TV you can play video, music and photo les stored on DLNA
certied home media servers connected to your home network. In
order to use this feature, you must connect this unit to the Internet.
It is recommended that les to be played back in this unit are
recorded under the following specications:
<MP3>
• Sampling frequency : 32kHz or 44.1kHz or 48kHz
• Constant bit rate : 32kbps - 320kbps
<JPEG>
• Upper limit : 16Mpixel
<MPEG>
• Playable codec : MPEG1, MPEG2
• Maximum size of a video : 1920 x 1080
• Audio type : AC3, MPEG1 audio layer 3 (MP3),
MPEG1 audio layer 2, LPCM
Note
• A maximum of 1,023 folders or les can be recognized.
• For the home server list, maximum of 16 servers can be displayed.
• The 10th and deeper hierarchies cannot be displayed.
• Unplayable les in the home server will not be displayed in the le list.
• For some les, playback is not available even if displayed in the le list.
• In order to play back the contents in home servers, the player and the servers must
be connected to the same access point.
• Compatibility and available playback function may differ depending on the home
server.
• Video les with unsupported audio format will be skipped.
• The quality of the playback picture or audio differs depending on your network
condition.
Before using DLNA
Follow the following procedure before using DLNA.
1 Connect this unit to the internet.
(See ‘Connecting the TV to the internet using an Ethernet cable’ or
‘Connecting the TV to the internet using a wireless LAN’ on page 41.)
• Broadband internet connection of 8Mbps or faster is required.
2 Set up the necessary network connection settings.
(See ‘Network’ on page 30.)
Using DLNA
1 Start DLNA home media servers in your home network.
• For details, refer to the user manual of the DLNA certied
device.
2 Press MENU on the remote control.
3 Use Î /ï/Í /Æ to select [Browse PC].
• This unit will start loading the home server list.
4 After loading, home server list will appear. Select a home server
you want to access, then press [OK].
Philips Wireless MediaConnect
You can enjoy your TV as a PC monitor wirelessly using your home
network. Make sure you download the Philips Wireless MediaConnect
software and install it on your PC before you perform the steps below.
Install Philips Wireless MediaConnect
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [MediaConnect code].
• Write down the 12-digit code displayed on the screen. You
will need this to download MediaConnect software.
2 Start your internet browser on your PC and open the Philips Wireless
MediaConnect download page at www.wimediaconnect.philips.com/
On the website, you can check the necessary PC system requirements.
3 Enter the 12 digit code you wrote at step 1.
4 Click the ‘Download now’ button to download the free Philips
Wireless MediaConnect software.
5 Once downloaded, start the le “Philips Wireless MediaConnect_
setup.exe”. Follow the instructions on the screen to complete
software installation.
Using Philips Wireless MediaConnect
1 Launch Philips Wireless MediaConnect on your PC rst.
• Select "Start projecting" with right click on the in the
system tray.
• The start up screen for Philips Wireless MediaConnect will be
displayed and the unit searches for an available PC that is running
Philips Wireless MediaConnect software.
Once connected, the Philips Wireless MediaConnect software will encode
and stream the screen of your PC as a video along with audio.
Depending on your computer and network conguration, there will be a
delay between your PC screen and the TV but the audio-video will always
be in sync.
Philips Wireless MediaConnect Help
To read the Philips Wireless MediaConnect Help, right click the program
icon in the notication tray of the PC and select Help.
Specics
You can project high denition (HD) or standard denition (SD) video,
depending on the processing power of your PC. For smooth playback
of HD video, please use a hardware accelerated video player on your
computer. A hardware accelerated video player uses the graphics
adapter of your PC to render HD video rather than the processor.
This frees up the processor for Philips Wireless MediaConnect video
encoding. The content protection on most DVD or Blu-ray Disc movies
might restrict watching the movie on TV when the disc is playing on
a PC. The TV shows PC media les with a small delay. Philips Wireless
MediaConnect is only available for PC.
PC requirements
Windows XP, Windows Vista, Windows 7,
Mac OS X 10.6 or above (PC only)
Minimum PC requirements
• Intel® Core™ 2 Duo 1.8GHz
• 512MB RAM
• IEEE 802.11n
Recommended PC requirements
• Intel® Core™ 2 Duo 2.1GHz
• 1GB RAM
EN
![](asset-11.png)
16
ListentomusicusingDLNA
1 Press Î /ï to select a le or a folder.
2 Press OK or Æ∆ to play the selected les.
• Press OK or Æ∆ to pause, press OK or Æ∆ again to resume.
• Press ∫ to skip up the next le.
• Press ¢ to skip down the previous le.
• Press Ê to stop playback.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
Repeat
Off Sets repeat playback to off.
On Sets repeat playback for all MP3 files in the
current folder.
Shuffle
Off Sets shuffle playback to off.
On Sets shuffle playback for all MP3 files in the
current folder.
TVspeakers
Off The sound will not be output from the unit's
speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Note
• [MasterEasyLink] must be activated in the [Preferences] menu to make the
[TVSpeakers] menu available when you select [On]or[SpeakersEasyLink].
WatchvideosusingDLNA
1 Press Î /ï to select a le or a folder.
2 Press OK or Æ∆ to play the selected les.
• Press OK or Æ∆ to pause, press OK or Æ∆ again to resume.
• Press ∫ to fast-forward search.
• Press ¢ to fast-backward search.
• Press Ê to stop playback.
»Press Æ∆ to resume from the point at which playback
was stopped. Press OK to play from the beginning of the
le at which playback was stopped.
• Press CH+ to play the next le.
• Press CH− to play the current le at the beginning.
»Press CH− twice within 5 seconds to play the previous le.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
TVspeakers
Off The sound will not be output from the unit's
speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Note
• The resume information will be kept even when the unit is turned off.
• If you play another le while the previously viewed le is being resumed, the resume
information of the previously viewed le will be deleted.
GuidetoDLNA
Server 1
Server 2
Server 3
Audio
Photos
Video
Folder
Highway Blues Title: ...
Album: ...
Duration: 00:03:41
Year:
Video10
Blue hills
4
5
2
1
3
1 Home server list
2 Folder / media icon
3 Group (folder) / le list
4 Image
5 Current le info
ViewyourpicturesusingDLNA
1 Press Î /ï to select a le or a folder.
2 Press OK or Æ∆ to start a slideshow of the les.
• Press OK or Æ∆ to pause the slide show.
»The ∆ icon appears.
• Press ¢ or ∫ to move between images.
• Press BACK or Ê to stop the slide show.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
Slidetime*1
Short Switches to the next image in 5 seconds.
Medium Switches to the next image in 10 seconds.
Long Switches to the next image in 15 seconds.
Transitions*1
None No effect when switching images.
Dissolve Overlaps a next image on a current image.
Wiperight Pushes a current image out from left.
Wipeleft Pushes a current image out from right.
Wipeup Pushes a current image out from bottom.
Wipedown Pushes a current image out from top.
Boxin A next image comes into the center from out.
Boxout A next image goes to the out from center.
Rotate*2
0Displays an image at its original direction.
90 Rotates an image clockwise by 90 degrees.
180 Rotates an image clockwise 180 degrees.
270 Rotates an image clockwise 270 degrees.
Zoom*2
1x Displays an image at its original size.
2x Magnifies a current image as twice.
4x Magnifies a current image as fourfold.
*1 You can set [Slidetime]and [Transitions] when images are in Slide show.
*2 You can set [Rotate] and [Zoom] when Slide show is in pause mode.
EN
![](asset-12.png)
17
EnglishFrançaisEspañol
EnjoyingvTuner
With this unit, you can enjoy video and internet radio with vTuner via the
internet. In order to watching video and listen to internet radio, you must
connect this unit to the internet.
Videoplayback
After you set up the network connection, follow the following
procedure to watch the video.
Guide to the player screen
1
2
3
Recommendatio... F... G... M...
FavoriteNextPrevious 2/3
News...
e.g.)Recommendations
1 Category :List of category menus
[Recommendations]
List of recommendation stations
[Favorites]
List of your favorite video stations
[Genre]
List of stations categorized by genre
[MostPopularPodcasts]
List of popular podcasts
2 Station list :Displays station list.
3 Operation guide :Displays color buttons (red / green / yellow / blue)
guide.
1 Press NETTV on the remote control and then use Î /ï/Í /Æ to
select [vTunerVideo].
2 Use Í /Æ to select the desired category, then press OK.
3 In the player screen, use Î /ï/Í /Æ to select the desired station or
genre, then press OK.
Guide to the playback screen
1
4
6
5
2
3
GenreF...R... M...
FavoriteNextPrevious
Date : Nov /25/ 2010
NEWS NEWS (Video)
NEWS NEWS (11.25.10)
NEWS NEWS (11.24.10)
NEWS NEWS (11.23.10)
NEWS NEWS (11.22.10)
NEWS NEWS (11.21.10)
The latest news from .................
Duration : 00:19:24
1 Station icon
2 Station name
3 Station information
4 Episode list
5 Color buttons (red / green / yellow / blue) guide
6 Current episode information
4 In the playback screen, use Î /ï to select the desired episode, then
press OK.
• After loading, playback of the selected episode will start.
• To stop playback, press Ê.
• Episode list can be displayed 5 episodes at one time. To show
the previous / next episodes, press Colorbuttons(red/green).
• To enlarge playback screen, press Colorbuttons(blue).
NetTV
Net TV offers Internet services for your TV. Use the TV remote control
to browse the Net TV Internet pages. You can play movies, listen to
music and much more, all from your TV screen.
- Because Net TV is an online system, it can be modied over time to
better serve its purpose.
- Some Net TV services can be added, changed or stopped after some
time.
- You cannot download and save les or install plug-ins.
BeforeLoggingintoNetTV
Follow the procedure below before logging in to Net TV.
1 Connect this unit to the internet.
(See ‘Connecting the TV to the internet using an Ethernet cable’ or
‘Connecting the TV to the internet using a wireless LAN’ on page 41.)
2 Set up the necessary network connection settings.
(See ‘Network’ on page 30.)
LoggingintoNetTV
1 Press NETTV on the remote control.
• Net TV screen will appear.
• For the rst time only, [PhilipsTermsofUseInternetEnabled
product] screen will appear. After conrming the content, use
Í /Æ to select [Agree], then press OK.
GuidetoNetTVmenuscreen
Net TV start screen
1
4
2
3
Terms of use Country USA
All
Video
Music
Game
News
Lifestyle
1 Sorting items : Categorizes genre of each services.
2 Network Service icons : Displays service icons.
3 Country : Selects what country you live.
4 Terms of Use : Displays a clause of net service.
InformationonNetworkServices
For detailed information on 3rd party Internet services, please visit the
service providers website:
Netix : http://www.netix.com/HowItWorks
Film Fresh : http://lmfresh.roxionow.com/
VUDU : http://www.vudu.com/product_overview.html
Cloud TV : http://www.activevideo.com
EN
![](asset-13.png)
18 EN
[NewStations]
List of new stations
[MostPopularStations]
List of popular station
[Getaccesscode]
Displays the access code, which will be required when creating a
vTuner account on your PC
[Reset]
Removes all stations / folders in [RecentlyPlayed], [Favorites]
and [MyAddedStations]
3 In the station / folder list, use Î /ï to select the desired station, then
press OK.
• After loading, playback of the selected station will start.
• If you select a folder, use Î /ï to select the desired station in
the next hierarchy, then press OK.
• To stop playback, press Ê.
• To go back to the previous or next hierarchy, press Í /Æ.
4 Press MENU to exit.
Note
• This unit cannot play back stations with audio format other than MP3 and WMA.
• Internet radio service may not be fully available with narrowband internet connection.
(e.g. 56k modem) When listening to internet radio, use broadband internet
connection. (For details, contact your internet service provider.)
• Depending on the bit rate of a station or the network environment, it may take a
while to complete loading the station or playback may not be available.
• The streaming audio may be interrupted during playback, when the vTuner server is busy.
• Some stations cannot be displayed in the list, depending on the network environment.
• If the loading time of a station exceeds 3 minutes, the loading will be canceled.
• The order of station / folder in the list depends on the information from vTuner server
and may change without notice.
Guidetotheplaybackscreen
e.g.)Location
Jazz(3)
FM 76.2 FM
Jazz jAzz jaZz jazZ
Schonan Beach FM 78.9
Favorite
2
3
4
6
5
1
1 Current hierarchy (total number of items)
2 Current station information
(Information will be changed when INFO is pressed)
3 Color buttons (red / green / yellow / blue) guide
4 Station list
5 Playback status
6 Station icon
5 Press MENU to exit.
Note
• Video service may not be fully available with narrowband internet connection. (e.g.
56k modem) When watching video, use broadband internet connection. (For details,
contact your internet service provider.)
• Depending on the bit rate of a station or the network environment, it may take a
while to complete loading the station or playback may not be available.
• The streaming video may be interrupted during playback, when the vTuner server is busy.
• Some stations cannot be displayed in the list, depending on the network environment.
• If the loading time of a station exceeds 3 minutes, the loading will be canceled.
• The order of station / episode in the list depends on the information from vTuner
server and may change without notice.
AddtoFavorites
You can add your favorite stations to [Favorites] in the category tab. To
add your favorite stations, follow the following procedure.
1 Follow steps 1 to 2 in ‘ Video playback’ on page 17.
2 Use Î /ï/Í /Æ to select the station you want to add to [Favorites],
then press Colorbuttons(yellow).
• The selected station is added to the station list in [Favorites].
• Conrmation message will appear.
• Press Colorbuttons(yellow) to add your favorite station
in [Favorites] while the desired episode is selected in the
episode list or the episode is being played back.
3 Press OK.
4 Press MENU to exit.
RemovefromFavorites
1 Follow step 1 in ‘ Video playback’ on page 17.
2 Use Í /Æ to select [Favorites] in the category tab, then press OK.
3 Use Î /ï/Í /Æ to select the station you want to remove from
[Favorites], then press Colorbuttons(yellow).
• Conrmation message will appear.
4 Use Í /Æ to select [Yes], then press OK.
• The selected station is removed from [Favorites].
5 Press MENU to exit.
Internetradioplayback
After you set up the network connection, follow the following
procedure to listen to internet radio.
1 Press NETTV on the remote control and then use Î /ï/Í /Æ to
select [vTunerRadio].
• Category list will appear.
2 In the category list, use Î /ï to select the desired category, then
press OK.
• Station / folder list of selected category will appear.
• For [Location] and [Genre], use Î /ï to select the desired
location or genre after selecting the category, then press OK.
[RecentlyPlayed]
List of stations which are recently played
[Favorites]
List of your favorite radio stations
[MyAddedStations]
List of stations which are added on vTuner website (This category
will appear only after you add stations on vTuner website. )
[Location]
List of stations categorized by location
[Genre]
List of stations categorized by genre
![](asset-14.png)
19EN
EnglishFrançaisEspañol
Pandora®operations
With this unit, You can instantly listen to personalized radio stations
streamed over the Internet from Pandora.
To learn more about Pandora, please visit www.pandora.com
ActivatingPandora
In order to listen to Internet radio streamed from Pandora via the
Internet, you must create a Pandora account and activate this unit.
1 Press NETTV on the remote control and then use Î /ï/Í /Æ to
select [PANDORA] > [Createnewaccount].
2 Use Î /ï to select [No,IamnewtoPandora.], then press OK.
3 Note the activation code and website address displayed on the TV
screen.
4 On your PC, visit the website address noted at step 3.
5 Follow directions on the website to create your account.
6 On this unit, select [Continue] and press OK to complete
activation.
AddingPandoraUserAccounts
You can add multiple Pandora user accounts on this unit.
1 Follow steps 1 to 2 in ‘Activating Pandora’ on page 19.
2 Use Î /ï to select [Yes,IhaveaPandoraaccount], then press OK.
3 Enter your e-mail address, then press OK while [OK] is selected.
4 Enter a password, then press OK while [OK] is selected.
5 Use Î /ï to select [SignIn], then press OK.
• Your account is added to the user list and player screen
appears on the TV screen.
Note
• Pandora is available only in the United States.
• You can add up to 5 accounts. After creating 5 accounts, [Createnewaccount] is not
displayed.
CreatingaNewStation
By entering your favorite artists or songs, Pandora selects music and
creates a new station for you on the basis of the entered information.
1 On the player screen, press Colorbuttons(blue) to display station
list.
2 Press Colorbuttons(yellow) to call up the [ToolMenu].
3 Use Î /ï to select [Createanewstation], then press OK.
4 Enter a name of your favorite artist or song, then press OK while
[OK] is selected.
• Search result will appear on the right side of the TV screen.
• If the selection screen of result type appears, use Î /ï to
select the desired type, then press OK.
5 Use Î /ï to select the desired station, then press OK to start the
playback.
Button Action
Æ∆ Resume the playback / Pause the playback.
ÊStop the playback and the station list will appear.
∫Skips to the next song.
Note
• On the [ToolMenu], you can delete or rename the currently selected station.
Addtofavoritelist
You can add your favorite stations to [Favorites] in the category list. To
add your favorite stations, follow the following procedure.
1 Follow steps 1 to 3 in ‘Internet radio playback’ on page 18.
2 Use Î /ï to select the station you want to add to [Favorites], then
press Colorbuttons(yellow).
• The selected station is added to [Favorites] folder.
• Conrmation message will appear.
• If you select a folder, use Î /ï to select the desired station in
the next hierarchy, then press Colorbuttons(yellow).
3 Press OK.
4 Press MENU to exit.
Note
• You can also add your favorite stations to [Favorites] on your PC. To add your favorite
stations on your PC, visit http://go2service.vtuner.com/ph/ and create a vTuner account
with the access code, which you can check from the category list. (See ‘Internet radio
playback’ on page 18.)
• You can change folder names or order of lists in your vTuner page on the internet.
• [My_Favorite] folder will appear after you add a station to [Favorites] on this unit.
(Your favorite station will also be added to [My_Favorite] folder.)
Removefromfavoritelist
1 Follow steps 1 to 2 in ‘Internet radio playback’ on page 18.
2 Use Î /ï to select [Favorites], then press OK.
3 Use Î /ï to select the station you want to remove from
[Favorites], then press Colorbuttons(yellow).
• Conrmation message will appear.
4 Use Í /Æ to select [Yes], then press OK.
• The selected station is removed from [Favorites] folder.
5 Press MENU to exit.
AddstationsonthevTunerwebsite
You can add stations which are not in the vTuner station list.
1 Follow steps 1 to 2 in ‘Internet radio playback’ on page 18.
2 Use Î /ï to select [Getaccesscode], then press OK.
• The latest vTuner website address and access code for this
unit will be displayed. Please take a note of the access code.
(This access code will be required when creating a vTuner
account.)
3 On your PC, visit the website and create your vTuner account.
• Follow the instructions given on the PC screen.
4 Add stations by following the instructions given on the PC screen.
• The stations will be added to [MyAddedStations].
Resetthestationlist
You can remove all stations / folders in [RecentlyPlayed], [Favorites]
and [MyAddedStations].
1 Follow steps 1 to 2 in ‘Internet radio playback’ on page 18.
2 Use Î /ï to select [Reset], then press OK.
3 Use Î /ï to select [Yes], then press OK.
• All stations / folders in [RecentlyPlayed], [Favorites] and
[MyAddedStations] are removed.
4 Press MENU to exit.
![](asset-15.png)
20
UsingTwitter
You can view your Twitter feeds and more using the Twitter application
on this unit.
- For more details about Twitter, please visit www.twitter.com
LoggingintoTwitter
After you set up the network connection, you must log in with your
Twitter account.
Make sure the unit is not in network service or Browse USB mode.
1 Press NETTV on the remote control and then use Î /ï/Í /Æ to
select [Twitter].
• Login screen will appear.
2 Use Î /ï to select [Username], then press OK.
• Software keyboard will appear.
Keysonthekeyboard Action
Characters Select each one of characters from the list.
Clear Delete the last character in the entry field.
Allclear Delete all characters in the entry field.
a/A/@ Switch case and symbols.
Cancel Cancel the input.
OK Determine the input Username and/or Password.
3 Use Î /ï/Í /Æ to input your [Username]and [Password] into the
entry elds. Select [OK]after you have lled in all the necessary
items in the entry eld, then press OK.
• Password can be skipped next time onwards once you have
selected [Rememberme] when registering the user name.
• Software keyboard will disappear.
4 Use Î /ï/Í /Æ to select [Start], then press OK.
• The unit will now establish a connection with the Twitter
server and perform authentication.
5 When the unit is logged in successfully, Twitter [Home]menu will
appear at the left and the timeline will appear at the bottom of the
TV screen.
Note
• User name and password are case-sensitive.
• User name will not accept your e-mail account. Use only your user name registered
on the Twitter server.
• If you select [Start] with no user name, the unit logs in as 'Public'. In this case you can
display 'Public timeline' and 'Trends' only.
• For questions regarding Twitter, please visit www.twitter.com
GuidetothePlayerScreen
On the player screen, you can set various options to the currently
playing song.
XXXXX
XXXXX
ABC
American Oldies Radio
Station List
4:52 0:00
1 2 3 4
1 Give thumbs up to the currently playing song.
Pandora will play songs similar to the song.
2 Give thumbs down to the currently playing song.
Pandora will skip and will not play the song.
3Bookmarks the currently playing song.
You can view your bookmarked songs list by
accessing Pandora website and log into your
account.
4Tells Pandora that you do not like the currently
playing song. Pandora will not play the song for
about a month.
EN
![](asset-16.png)
21
EnglishFrançaisEspañol
DisplayingMentionsonTwitter
Your TV displays replies for the logged in user.
1 Follow steps 1 to 2 in ‘Viewing tweets on the TV’ on page 21.
2 Use Î /ï to select [Mentions], then press OK.
• If you have no replies, [TVwasnotabletoacquiretheTweet.]
will appear.
ViewingListsonTwitter
The list shows timeline categories such as friends, family, colleagues, or
sports teams created by yourself on your account.
1 Follow steps 1 to 2 in ‘Viewing tweets on the TV’ on page 21.
2 Use Î /ï to select [List], then press OK.
• If you have no lists, [Cannotgetthelistinformation.] will
appear.
3 When you press Colorbuttons(yellow) in 1 or 5 list view, the
timeline will be separated at top and bottom. The upside displays 3
timelines and the downside display 2 timelines.
2 List View
Peter’s rock star
Propatanga
Tinner Loberto
Perseverance prevails.
Phily and Maggy
Rocky Mountain
Surrounded by dogs
Cloudy Sky
Shopping Mall
Baseball
Right as rain. That was a sense of humor...
less than 1 minute
I'll be there, textbook in hand!
less than 1 minute
Greetings, I am looking for a small tiny stove in which to heat once a day.
less than 1 minute
Would you like the straightforward reasons that people believe in it?
less than 1 minute
It’s not so rich a country as your country.
less than 1 minute
Rocky Mountain
1 List View 2 List View 5 List View
Surrounded by dogs
4 When you press Colorbuttons(blue) in 1 or 2 list view, the
timeline will increase 5 lines.
5 List View
Peter’s rock star
Propatanga
Tinner Loberto
Perseverance prevails.
Phily and Maggy
Rocky Mountain
Surrounded by dogs
Cloudy Sky
Shopping Mall
Baseball
Right as rain. That was a sense of humor...
less than 1 minute
I'll be there, textbook in hand!
less than 1 minute
Greetings, I am looking for a small tiny stove in which to heat once a day.
less than 1 minute
Would you like the straightforward reasons that people believe in it?
less than 1 minute
It’s not so rich a country as your country.
less than 1 minute
Rocky Mountain
1 List View 2 List View 5 List View
Surrounded by dogs
Cloudy Sky
Shopping Mall
Baseball
ViewingTrendsonTwitter
Trends show topics trending in your area.
1 Follow steps 1 to 2 in ‘Viewing tweets on the TV’ on page 21.
2 Use Î /ï to select [Trends], then press OK.
• Press Colorbuttons(green)to switch between the [Area]
and [Trends].
• If you display [Area], the topside will be displayed some
countries, and the downside will be displayed some cities.
GuidetoTwittermenuscreen
Twitter Home Screen
Twitter Home Screen consolidates browsing of tweets and some
functional menus for Twitter.
To call up the screen, press NETTV on the remote control and then
use Î /ï/Í /Æ to select [Twitter].
Single View
Phily and Maggy
1
2
3
4
Home
Favorite
Mentions
List
Trends Right as rain. That was a sense of humor...
less than 1 minute
1 Menu : List of functional menus.
2 Viewing channel : Displays currently watching channel.
3 Timeline : Displays currently tweeting on Twitter.
4 Operation guide : Displays Color buttons (red / green / yellow / blue)
guide.
Full View
Single view switches to Full view when you select timeline then press OK.
Peter’s rock star
Propatanga
Tinner Loberto
Perseverance prevails.
Phily and Maggy
Home
Favorite
Mentions
List
Trends
Right as rain. That was a sense of humor...
less than 1 minute
I'll be there, textbook in hand!
less than 1 minute
Greetings, I am looking for a small tiny stove in which to heat once a day.
less than 1 minute
Would you like the straightforward reasons that people believe in it?
less than 1 minute
It’s not so rich a country as your country.
less than 1 minute
ViewingtweetsontheTV
After logging in to Twitter, your TV will download the latest 20 tweets to
display.
1 Press NETTV on the remote control and then use Î /ï/Í /Æ to
select [Twitter].
2 Use Î /ï/Í /Æ to select the desired user name, then press OK.
• If you have not stored the password, [] will appear beside
the user name.
3 When the unit is logged in successfully, Twitter [Home]menu will
appear at the left and the timeline will appear at the bottom of the
TV screen.
Note
• 4 user names (accounts) can be stored in this unit.
ViewingFavoritesonTwitter
Your TV displays the logged in user's favorites on Twitter.
1 Follow steps 1 to 2 in ‘Viewing tweets on the TV’ on page 21.
2 Use Î /ï to select [Favorite], then press OK.
• If you have no favorites, [TVwasnotabletoacquirethe
Tweet.]will appear.
EN
![](asset-17.png)
22
Settingitems Description
Color
enhancement
Off Sets Color enhancement to off.
On Makes colors more vivid bright colors.
Activecontrol
Off Sets Active control to off.
Onwith
Light
Sensor
Adjusts backlight for the best picture quality by
dynamically adjusting the backlight intensity in
accordance with lighting condition in the room.
Onwithout
Light
Sensor
Adjusts backlight for best picture quality based
on the incoming video signal.
Pictureformat
Automatic
Refer to ‘Summary of picture formats’ on
page 23.
Superzoom
4:3
Movie
expand14:9
Movie
expand16:9
Wide
screen
Unscaled
Modeselection
PC Turns off image enhancement features which
makes the TV to act purely as a monitor.
HDTV Enables image enhancement features to
improve picture quality.
Autoadjustment
The horizontal / vertical position, clock and
phase of the PC screen are automatically
adjusted.
Clock Setting to stabilize the PC screen.
Phase Setting to improve the clarity of the PC screen.
Horizontalshift Adjusts the horizontal position of the picture
for PC screen.
Verticalshift Adjusts the vertical position of the picture for
PC screen.
5 Press MENU to exit.
Note
• [Modeselection] will not be displayed when incoming signals are other than
720 x 480p 60Hz, 1280 x 720p 60Hz and 1920 x 1080p 24 / 30 / 60Hz.
• [DigitalNaturalMotion] If the input video contains adjacent video frames with
inherent motion blur captured by the video camera, [DigitalNaturalMotion] will
interpolate blur and cause streaking artifacts in high motion scenes. If the content
you are watching causes a lot of Interpolation Induced Blur Amplication, it is best
to turn off [DigitalNaturalMotion] temporarily.
• [DigitalNaturalMotion] uses frame interpolation to make the video appear
smooth which causes a video lag of about 200 milliseconds. If you are using the TV
for gaming or as a PC monitor DNM will introduce lag. If your gaming system has a
lag adjustment feature for your game controller, use it to negate the lag or else turn
off DNM for any application where lag is an issue. If your prefer to use DNM while
watching movies on your Home Theater PC (HTPC) and are using an external
Audio Receiver for sound output, set a 200 millisecond delay on your audio output
for A/V sync. You will not experience A/V sync issues for anything other than
gaming or HTPC applications since the TV has internal A/V sync functionality.
Changingpictureandsoundsettings
You must set [Home] in [Location]. (Refer to page 30.)
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Changingpicturesettings
1 Press MENU on the remote control.
2 Use Î /ï/Í /Æ to select [Setup]> [Picture].
Picture
Sound
Features
Installation
Software
Settings assistant Start now
Contrast
Brightness
Color
Tint
Sharpness
Color temperature Cool
Dynamic contrast Off
3 Use Î /ï/
Í /Æ to select one of the picture settings, and press OK
to enter the setting.
4 Adjust the picture quality.
The following picture settings can be congured. Depending on
the format of the picture source, some picture settings are not
available.
Settingitems Description
Settingsassistant Use [Settingsassistant] to guide you through
the best picture settings.
Contrast Adjusts the intensity of bright areas, keeping
dark areas unchanged.
Brightness Adjusts the intensity and details of dark areas.
Color Adjusts color intensity.
Tint Adjusts the color balance in an image.
Sharpness Adjusts the level of sharpness in image details.
Color
temperature
Cool More blue tones.
Normal Standard tones.
Warm More orange tones.
Dynamic
contrast
Off Sets Dynamic contrast to off.
On Automatically enhances contrast in an image.
DigitalNatural
Motion
Off Sets Digital Natural Motion to off.
Minimum Reduces judder in video using low intensity
frame interpolation to make the video smooth.
Maximum Reduces judder in video using high intensity
frame interpolation to make the video smooth.
Noise
reduction
Off Sets Noise reduction to off.
On Reduces noise in an image.
MPEGartifact
reduction
Off Sets MPEG artifact reduction to off.
On Reduces a blockiness and a blurriness and
judder by digital filter.
EN
![](asset-18.png)
23
EnglishFrançaisEspañol
For4:3videosignal
[Automatic] [Superzoom]
[Movieexpand16:9]
[4:3]
[Widescreen] [Movieexpand14:9]
Automatic
Other than DTV and HDMI connected devices, enlarges the
picture to best t the screen.
DTV and HDMI connected devices display the picture at its
original size. The subtitles may remain visible.
Superzoom
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally and vertically and its left and right edges are enlarged.
This crops out the top and bottom of the picture.
4:3
Display a 4:3 picture at its original size. Sidebars appear on both
edges of the screen.
Movieexpand14:9
Display a 4:3 picture at a 14:9 size; the picture is stretched
horizontally and vertically. This crops out the top and bottom of the
picture. Sidebars appear on both edges of the screen.
Movieexpand16:9
Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally
and vertically. This crops out the top and bottom of the picture.
Widescreen
Display a picture that is stretched out of proportion to ll the screen.
ForPCinputsignal
[4:3] [Widescreen]
[Unscaled]
4:3
Display a proportionately stretched picture. Sidebars appear on
both edges of the screen.
Widescreen
Display a picture that is stretched out of proportion to ll the screen.
Unscaled
Display a picture in its original size.
Note
• Even if you select either [Automatic] or [Widescreen] in 16:9 video signal, sidebars
appear when the broadcasting station is transmitting up-converted 4:3 analog video
signal to be visible by digital broadcasting.
Changingpictureformat
1 Press FORMAT on the remote control.
2 Use Î /ï to select a picture format and press OK to conrm your
choice.
Summaryofpictureformats
Display modes can be selected when the broadcasting station is sending
16:9 or 4:3 video signal. And 3 types of display modes can be selected
for PC input signal.
For16:9(480i,480p,720p)videosignal
[4:3]
[Widescreen]
[Automatic]
Automatic
Other than DTV and HDMI connected devices, enlarges the
picture to best t the screen.
DTV and HDMI connected devices display the picture at its
original size. The subtitles may remain visible.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
Widescreen
Display a 16:9 picture that is stretched horizontally and vertically.
For16:9(1080i,1080p)videosignal
[Automatic]
[Unscaled]
[4:3]
[Widescreen]
Automatic
Other than DTV and HDMI connected devices, enlarges the
picture to best t the screen.
DTV and HDMI connected devices display the picture at its
original size. The subtitles may remain visible.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
Widescreen
Display a 16:9 picture that is stretched horizontally and vertically.
Unscaled
Display a 16:9 picture at its original size.
EN
![](asset-19.png)
24
Settingitems Description
SRS
TruSurroundHD
Off Sets SRS TruSurround HD™ to off.
On Selects available modes for surround sound.
AVL(Auto
VolumeLeveling)
Off Sets AVL to off.
On Reduces sudden changes in volume, for example,
during commercials or when switching channels.
TVspeakers
Off The sound will not be output from the unit's
speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Deltavolume
If a channel
or input
device is:
Too
Loud
Navigate to that channel
or input device and
set a negative delta
volume level as per your
personal preferences.
TooSoft
Navigate to that channel
or input device and
set a positive delta
volume level as per your
personal preferences.
4 Press MENU to exit.
Note
• [MasterEasyLink] must be activated in the [Preferences] menu to make the
[TVSpeakers] menu available when you select [On]or[SpeakersEasyLink].
Usingautomode
1 Press AUTOMODE to set your TV to a predened picture and
sound setting.
2 Use Î /ï to select one of the following settings :
• [Personal] : The customized settings you dened by using
the [Picture] menu.
• [Sports] : Vivid picture settings and clear sound for high action.
• [Standard] : For normal TV viewing.
• [Movie] : Brilliant picture settings for a cinematic experience.
• [Game] : Optimized for PCs, games consoles and playstations.
• [InternetVideo] : Optimized for low bitrate internet video.
• [PowerSaver] : Eco TV settings for lower power consumption.
Createanduselistsoffavoritechannels
You can create lists of your preferred TV channels so that you can nd
those channels easily.
Selectalistoffavoritechannels
1 Press FAV on the remote control.
»Your lists of favorite channels are displayed.
2 Use Î /ï to highlight a list, and then press OK to select the list.
UsingyourTVasaPCmonitor
Use a VGA connector to connect a PC to your TV. For sound, add an
audio cable with a stereo mini jack.
Caution
• Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supportedscreenresolutions
The following screen resolutions are supported in PC mode :
Resolution Refresh rate
640×480 60Hz
800×600 60Hz
1024×768 60Hz
1280×768 60Hz
1360×768 60Hz
1440×900 60Hz
1280×1024 60Hz
1400×1050 60Hz
1680×1050 60Hz
1920×1080 60Hz
Changingsoundsettings
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Sound].
Picture
Sound
Features
Installation
Software
Equalizer Start now
Balance
SRS TruSurround HD Off
AVL Off
TV speakers On
Delta volume
2 Use Î /ï/Í /Æ to highlight a sound setting and then press OK to
select the setting.
3 Adjust the following items.
The following sound settings can be congured. Depending on the
sound source, some sound settings are not available.
Settingitems Description
Equalizer Adjust tone quality for each frequency.
Balance Adjusts the balance of the right and left
speakers to best suit your listening position.
Digitalaudiolanguage
Available for digital channels only, when
multiple languages are broadcast. Lists available
audio languages.
Alternateaudio
Main
Available for analog channels only when a main
and second audio program (SAP) is broadcast.
Select the main audio program.
SAP
Available for analog channels only when a main
and second audio program (SAP) is broadcast.
Select the second audio program.
Mono/Stereo Mono Outputs mono-audio.
Stereo Outputs stereo-audio.
EN
![](asset-1a.png)
25
EnglishFrançaisEspañol
Settingthetimemanually
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Clock] > [Autoclockmode].
2 Select [Manual], and then press OK to conrm your choice.
3 Use Î /ï to select [Time] and then press OK to set the time.
Use the format HH:MM. Select [AM] / [PM] for morning or afternoon.
4 Press BACK to conrm your choice.
5 Use Î /ï and then press OK to enter the menu for [Day].
6 Use Î /ï to select the day.
7 Press OK to conrm your choice.
8 Press MENU to exit.
Closedcaption
Closed captioning is an assistive technology that allows persons with hearing
disabilities to access television programming. Closed captioning displays the
audio portion of programming as text superimposed over the video.
Note
• Closed captioning service may not be controlled by this unit's menu options if you are
watching television through an external cable or satellite set top box. In which case you will
need to use the menu options on the external set top box to control Closed Captioning.
• The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials include closed caption information. Refer to
your area TV program listings for the TV channels and times of closed caption shows. The
captioned programs are usually noted in the TV listings with service marks such as [CC].
Displaycaptions
1 Press MENU on the remote control and then use Î /ï/Í /Æ to select
[Setup] > [Features] > [Captionsettings] > [Closedcaptions].
2 Press Î /ï to select [On], [Off] or [Onduringmute], and press
OK to conrm your choice.
3 Press MENU to exit.
DTV
SelectingDTVcaptionservices
1 Select a caption service for digital channels :
• Press MENU on the remote control and then use Î /ï/Í /Æ
to select [Setup] > [Features] > [Captionsettings] > [Digital
captionservice].
• Use Î /ï to select one of the listed caption services, and then
press OK to conrm your choice.
CS-1 to CS-6
Select one of these before changing any other item
in [Captionsettings] menu. Choose [CS-1] under
normal circumstances.
2 Press MENU to exit.
Selectinghowcaptionsaredisplayed
You can choose the size, font, color, background and other
characteristics of the caption text.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to select
[Setup] > [Features] > [Captionsettings] > [Digitalcaptionoptions].
2 Use Î /ï to highlight an option for digital captions, and press OK
to select the option.
3 Use Î /ï to highlight a setting for the option, and press OK to
conrm your choice.
4 Press MENU to exit.
Createoreditalistoffavoritechannels
1 Press FAV on the remote control to display your lists of favorite
channels.
2 Use Î /ï to highlight a list, and then press OK to select the list.
3 Press OPTIONS to enter edit mode.
»A list of channels is shown.
4 Use Î /ï to highlight a channel.
5 Press OK to select or deselect the highlighted channel.
»The channel is added to or removed from the list of favorite
channels.
6 Press MENU to exit.
Switchtooneofthechannelsonalist
1 Press OK on the remote control to display the last list that you
selected.
2 Use Î /ï to highlight a channel.
3 Press OK to select the channel.
»The TV switches to that channel.
Tip
• Press CH+/− to select channels in a list or press the numeric keys to select channels
that are not in a list.
Settingtheclock
You can set the time on your TV.
Settingthetimeautomatically
Some digital channels transmit the time. For these channels, you can set
the time automatically and choose which channel to read the time from.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Clock] > [Autoclockmode].
2 Select [Automatic] and then press OK to conrm your choice.
3 Select the channel from which the TV reads the time.
• Use Î /ï and then press OK to enter the menu for
[Autoclockchannel].
• Use Î /ï to highlight a channel.
• Press OK to conrm your choice.
4 (Optional) Select the time zone.
• Use Î /ï and then press OK to enter the menu for
[Timezone].
• Use Î /ï to highlight the time zone.
• Press OK to conrm your choice.
5 (Optional) Set daylight saving.
• Use Î /ï and then press OK to enter the menu for [Daylight
saving].
• Use Î /ï to highlight [Automatic] or [Off].
• Press OK to conrm your choice.
6 Press MENU to exit.
EN
![](asset-1b.png)
26
Tip
ToCanceltheSleepTimer
• Press SLEEPor Í /Æ repeatedly until “ 0 ” is displayed on the TV screen.
Childandratinglocks
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
SettingyourPIN
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
2 Enter a 4-digit PIN on theNumberbuttons, of the remote control.
• If you have not set up your PIN, enter [0], [0], [0], [0].
ChangingyourPIN
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [ChangePIN].
2 Enter a 4-digit PIN on theNumberbuttons of the remote control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN, enter [0], [0], [0], [0].
• If you have forgotten your PIN, enter [0], [7], [1], [1].
3 Enter your new PIN.
4 Enter your PIN again to conrm.
5 Press MENU to exit.
LocktheTV
This section describes how to lock all channels on the TV. At the
specied time, screen is blanked out and the audio is muted.
1 Ensure that the clock is set with the current time. (See ‘Setting the
clock’ on page 25.)
2 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
3 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
4 Use Î /ï to select [Lockafter], then press OK.
5 Press OK to select [Timer].
6 Use Î /ï to select [On] and activate the [Lockafter] feature.
Select [Off] to deactivate the feature.
7 Press OK to conrm your choice.
8 Use Î /ï to select [Time] and then press OK to set the time.
Use the format HH:MM, and select [AM] / [PM] for morning or
afternoon.
9 Press BACK to conrm the time.
10 Press MENU to exit.
11 Turn the TV off and on again.
DifcultiesviewingclosedcaptionsonDTVprogramming
If you have difculties viewing closed captions on DTV programming, including
HDTV, received from your subscription television provider, you should :
• consult any consumer information and manuals / guides on closed
captions for DTV programming provided by your subscription
television provider;
• ensure that the captioning function on your set-top box, if
applicable, is turned on; and,
• ensure that the captioning function on your DTV is turned on.
If you are still unable to view closed captions on DTV programming, you
should contact your subscription television provider for assistance.
TV
Selectingcaptionservices
1 Select a caption service for analog channels :
• Press MENU on the remote control and then use Î /ï/Í /Æ
to select [Setup] > [Features] > [Captionsettings] >
[Captionservice].
• Use Î /ï to select one of the listed caption services, and
press OK to conrm your choice.
2 Press MENU to exit.
Note
• Not all caption services are used by a TV channel during the transmission of a closed
caption program.
Summaryofcaptionservices
Service Description
CC-1 and T-1; are the primary caption and text services.
The captioning or text is displayed in the same language
as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CC-3 and T-3; serve as the preferred data channels.
The captioning or text is often a secondary language.
CC-2,CC-4,T-2
and T-4;
are rarely available and broadcasters use them only in
special conditions, such as when [CC-1] and
[CC-3] or [T-1] and [T-3] are not available.
• There are 3 display modes according to programs :
Paint-onmode:
Displays input characters on the TV screen immediately.
Pop-onmode:
Once characters are stored in memory, they are
displayed all at once.
Roll-upmode:
Displays the characters continuously by scrolling (max.
4 lines).
Sleeptimer
You can always put your TV in standby mode earlier or reset the
sleeptimer during the countdown.
1 Press SLEEP to set the sleeptimer.
(Also, you can set the sleeptimer in [Features] menu.)
2 Use SLEEPor Í /Æ repeatedly to change the amount of time (in
increments of 30 minutes up to 180 minutes).
• Each press of SLEEP or Æ will increase the time by 5 minutes.
• Each press of Í will decrease the time by 5 minutes.
• After setup, the sleep timer display can be called up for
checking by pressing SLEEP.
EN
![](asset-1c.png)
27
EnglishFrançaisEspañol
All
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Lock after
Channel Lock
TV ratings lock
Movie ratings lock
Canada English rati...
Canada French ratin...
• When you select [All], all items in the ratings list are locked.
• When you select [None], programs with no rating and
programs with a rating of none are locked.
• When you lock a rating, all ratings in the younger age
categories are automatically locked.
5 Press MENU to exit.
SummaryofTVratings
Agerating Contentrating
All None
None None
TV-Y : Appropriate for children of all ages with themes
and elements suitable for children aged 2-6.
None
TV-Y7 : Programs designed for children age 7 and older. [FantasyViolence]
TV-G : Programs suitable for all ages. These programs
contain little or no violence, no strong language
and little or no sexual dialog or situations.
None
TV-PG: Programs contain elements that some parents
may nd unsuitable for younger children and
which may need parental guidance. The program
may contain moderate violence, sexual dialog
and / or situations and some strong language.
[Dialog]
[Language]
[Sex]
[Violence]
TV-14 : Programs contain elements that may not be
suitable for children under 14 years of age.
These programs include one or more of the
following : intense violence, intense sexual
situations, suggestive dialog and strong language.
[Dialog]
[Language]
[Sex]
[Violence]
TV-MA: Programs are designed to be viewed by adults
and may be unsuitable for children under
the age of 17. These programs may contain
graphical violence, explicit sexual activity
and / or crude or indecent language.
[Language]
[Sex]
[Violence]
Note
• The V-Chip can block non rated programs as per “ CEA-608-E sec. L.3 ”. If the option to
block [None], [NR], [E] or [E] programs is used in [TVratingslock], [Movieratingslock],
[CanadaEnglishratingslock] or [CanadaFrenchratingslock] accordingly “ unusual results
may occur, and the unit may not receive emergency bulletins or other types of programming : ” ∙
Emergency Bulletins (Such as EAS messages, weather warnings and others) ∙ Locally originated
programming ∙ News ∙ Political ∙ Public Service Announcements ∙ Religious ∙ Sports ∙ Weather.
Lockingachannelorinputsource
This section describes how to lock input sources or specied channels.
The channels can be selected but the screen is blanked out and the
audio is muted.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
2 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
3 Use Î /ï to select [ChannelLock], then press OK.
Caption settings
Sleeptimer
Child lock
Change PIN
Lock after Timer
Channel Lock •Select
TV ratings lock •Select
Movie ratings lock •Select
Canada English ratings l...
•Select
Canada French ratings l...
•Select
•
•
4 Use Î /ï and then press OK repeatedly to switch between locked
and not locked. Each rating has a box-graphic in front of it to
indicate whether it is locked:
• A box with x indicates that the channel or input source is
locked.
• An empty box indicates that the channel or input source is
not locked.
5 Press MENU to exit.
UsingtheTVratingslock
Your TV is equipped with a V-chip that allows you to control access to
individual programs based on their age rating and content rating. The
program content advisory data are sent by the broadcaster or by the
program provider.
If you receive channels through a set-top box or cable box connected
by HDMI, you cannot use the TV ratings lock. Your set-top box or cable
box must be connected through RF or AV connectors.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
2 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
3 Use Î /ï to select [TVratingslock], then press OK.
4 Use Î /ï/Í /Æ and then press OK repeatedly to switch between
locked and not locked.
Each rating has a box-graphic in front of it to indicate whether it is
locked:
• A box with x indicates that all items in the content ratings list
are locked.
• An empty box indicates that no items in the content ratings
list are locked.
• A box with
/
indicates that some items in the content ratings
are already locked and some items remain not locked.
EN
![](asset-1d.png)
28
SummaryofCanadaEnglishratingslock
Rating Description
All All items in the ratings list are locked.
EExempt program.
CProgramming suitable for children under the age of
8 years. No profanity or sexual content of any level
allowed. Minimal comedic violence.
C8+ Suitable for children ages 8 and over. Low intensity
violence and fantasy horror allowed.
GMovies with a mild content, suitable for all ages.
PG Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or maybe
some bad language.
14+ Programming intended for children ages 14 and over.
May contain intense scenes of violence, strong profanity,
and depictions of sexual activity within the context of a
story.
18+ Programming intended for viewers ages 18 and over.
May contain strong violence, language, and sexual activity.
SummaryofCanadaFrenchratingslock
Rating Description
All All items in the ratings list are locked.
EExempt program.
GAppropriate for all ages with little or no violence and
little to no sexual content.
8ans+ Appropriate for children 8 and up which may contain
little violence, some foul language and / or little to no
sexual content.
13ans+ Appropriate for children 13 and up, with moderate
violence, language, and some sexual situations. Persons
under 13 should be accompanied by an adult.
16ans+ Appropriate for children 16 and up, with strong violence,
strong language, and strong sexual content.
18ans+ Only to be viewed by adults and contains extreme
violence and graphic sexual content / pornography.
Note
• The V-Chip can block non rated programs as per “ CEA-608-E sec. L.3 ”. If the option to
block [None], [NR], [E] or [E] programs is used in [TVratingslock], [Movieratingslock],
[CanadaEnglishratingslock] or [CanadaFrenchratingslock] accordingly “ unusual results
may occur, and the unit may not receive emergency bulletins or other types of programming : ” ∙
Emergency Bulletins (Such as EAS messages, weather warnings and others) ∙ Locally originated
programming ∙ News ∙ Political ∙ Public Service Announcements ∙ Religious ∙ Sports ∙ Weather.
Usetheregionratingslock
You can control access to digital programs based on downloaded region
ratings. Before you download a ratings table, ensure that regional ratings
are broadcast.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
2 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
3 Use Î /ï to select [Regionratingslock], then press OK.
4 Use Î /ï and then press OK repeatedly to switch between locked
and not locked. Each rating has a box-graphic in front of it to
indicate whether it is locked:
• A box with x indicates that the rating locked.
• An empty box indicates that the rating is not locked.
5 Press MENU to exit.
Usingthemovieratingslock
You can control viewing of movies based on their MPAA (Motion
Picture Association of America) rating.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Features] > [Childlock].
2 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
3 Select one of the menus for movie ratings lock.
• In the USA, select [Movieratingslock].
• In Canada, select [CanadaEnglishratingslock] or
[CanadaFrenchratingslock].
The following screen shows the ratings in [Movieratingslock].
Lock after All
Channel Lock NR
TV ratings lock G
Movie ratings lock PG
Canada English ratings l...
PG-13
Canada French ratings l...
R
NC-17
X
Caption settings
Sleeptimer
Child lock
Change PIN
4 Use Î /ï and then press OK repeatedly to switch between locked
and not locked. Each rating has a box-graphic in front of it to
indicate whether it is locked:
• A box with x indicates that all items in the rating are locked.
• An empty box indicates that no items in the rating are not locked.
• When you select [All], all items in the ratings list are locked.
5 Press MENU to exit.
SummaryofMovieratingslock
Rating Description
All All items in the ratings list are locked.
NR Not rated.
GMovies with a mild content, suitable for all ages.
PG Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or maybe
some bad language.
PG-13 Movies for which parental guidance may be
recommended if under age 13.
RRestricted. The movies usually contain offensive sex or
bad language and may be unsuitable for children under
the age of 17. Parental guidance or permission needed.
NC-17 Even with parental permission, forbidden under age 17.
More offensive sex, violence or bad language.
XMovies which generally focus on sex, violence and / or
bad language. Also known as pornography.
EN
![](asset-1e.png)
29
EnglishFrançaisEspañol
EasyLink
This function allows you to operate the linked functions between our
brand devices with EasyLink capabilities and this unit connected via a
HDMI cable.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Preferences] > [EasyLink].
Location
EasyLink
Master EasyLink On
Auto TV On •On
RC Key forwarding •Select
HDMI-ARC •On
Device List •Select
•
•
•
2 Use Î /ï to highlight the desired setting and then press OK to
select the setting.
3 Adjust the following items.
[MasterEasyLink]
Set the EasyLink [On] or [Off].
The following additional settings will disappear when you set to [Off].
Use Î /ï to select the desired option, then press OK.
Off Disable all EasyLink.
On Select if you have connected an external device that
is compatible with the EasyLink function.
[AutoTVOn]
Use Î /ï to select the desired option, then press OK.
Off This unit remains in standby mode even if you turn on
your connected EasyLink device.
On This unit turns on automatically when you turn on
your connected EasyLink device.
[RCKeyforwarding]
Use Î /ï to select the desired option, then press OK.
HDMI1 to HDMI4
Select enable or disable RC key forwarding if this
unit connected through HDMI1 to HDMI4 to your
EasyLink devices.
[HDMI-ARC]
Use Î /ï to select the desired option, then press OK.
Off Disable HDMI-ARC.
On
You can output TV audio through the HDMI cable
solely, provided both the TV and device are HDMI
ARC compliant.
[DeviceList]
This function lets you see the product name of connected devices.
Use Î /ï to select the desired HDMI device listed on the TV
screen, then press OK.
4 Press MENU to exit.
UsePhilipsEasyLink
Your TV supports Philips EasyLink, which enables one-touch play and
one-touch standby between EasyLink-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touchplay
When you connect your TV to devices that support one-touch play,
you can control your TV and the devices with one remote control. For
example, when you press
►
(play) on your DVD remote control, your
TV automatically switches to the correct channel to show the DVD
content.
One-touchstandby
When you connect your TV to devices that support standby, you can
use your TV remote control to put your TV and all connected HDMI
devices in standby mode. You can perform one-touch standby using the
remote control from any of the connected HDMI devices.
Systemaudiocontrol
When you connect your TV to HDMI CEC compliant devices, your
TV can switch automatically to play audio from the connected device.
To use one-touch audio, you must map the audio input from the
connected device to your TV.
You can use the remote control from the connected device to adjust
the volume.
Remotecontrol(RC)keyforwarding
RC key forwarding allows you to control EasyLink-compliant devices
using your TV remote control.
AudioReturnChannel(ARC)
HDMI ARC allows you to use Philips EasyLink to output TV audio
directly to a connected audio device, without the need for an additional
digital audio cable. HDMI ARC supports more digital audio formats than
S/PDIF. Be sure that the device is HDMI-CEC and ARC compliant, and
that the TV is connected to the device using an HDMI cable attached to
HDMI ARC connectors.
ActivateMasterEasyLink
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Preferences] > [EasyLink] >
[MasterEasyLink].
2 Use Î /ï to select [On].
Note
• Select [Off] to disable this function.
• Philips does not guarantee 100% interoperability with all HDMI CEC devices.
• The EasyLink-compliant device must be switched on and selected as the source.
[MasterEasyLink] must be activated in the [Preferences] menu to
make the [TVSpeakers] menu available in the [Sound] menu.
EN
![](asset-1f.png)
30
Setyourlocationtohome
You can set the location of your TV to [Home] or [Retailstore].
Choosing [Home] gives you full exibility to change predened settings
for picture and sound.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Preferences] > [Location].
2 Select [Home] and then press OK to conrm your choice.
3 Press MENU to exit.
Note
• You must set [Home]. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Network
Set up network connection settings in order to use Net TV or network
update function.
Networksettingassistant
Before you proceed to [Connectiontest] or other settings in
[Network] section, set this selection to suit your preference.
Wireless setting
Select to use a wireless LAN to connect to the internet by wireless
connection.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Networksetting
assistant] > [Wireless].
2 Use Î /ï to select a setting and then press OK.
Settingitems Description
Easyconnect
Select this setting if your router has a Wi-Fi
Protected Setup (WPS) button. Start scanning
for wireless networks on the TV after pressing
the WPS button on your router. If connection
test fails, refer to the router's manual for more
details.
Scan
Search for wireless networks automatically
and select the wireless network name (SSID)
from the list. see ‘Wireless network setting
(Auto)’on page 30.
Manualentry
Set up the connection to the Wireless LAN
Access Point (AP) (e.g. wireless router)
manually by entering the wireless network
name (SSID).see ‘Wireless network setting
(Manually enter your SSID)’on page 31.
3 Press MENU to exit.
Wired setting
Select to use an Ethernet cable to connect to the internet by wired
connection.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Networksetting
assistant] > [Wired].
2 Use Î /ï to select a setting and then press OK.
Connection test will start automatically. (See ‘Connection test’ on
page 30.)
3 Press MENU to exit.
Networkselection
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Manualnetwork
settings] > [Networkselection].
2 Use Î /ï to select a setting and then press OK.
Settingitems Description
Wireless Select to use a wireless LAN to connect to
the internet by wireless connection.
Wired Select to use an Ethernet cable to connect to
the internet by wired connection.
3 Press MENU to exit.
Connectiontest
Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such as
IP address, DNS settings, etc. manually.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Connectiontest].
Connection test will start automatically and the test result will
appear right after the connection test nishes.
• [Testing...]: The test is in progress.
• [Pass]: Connection test is successfully completed.
• [Fail]: Connection test failed. Check the connection settings.
Press OK to go to the list of network status conrmation screen.
2 Press MENU to exit.
Note
• If the connection test passes, you are ready to use Net TV or network update function
using the internet without making any additional settings.
• If the connection test fails, check if the Ethernet cable is connected to this TV properly
or if you have entered all the required details for the wireless LAN connection properly.
Wirelessnetwork
This menu is displayed only when you set [Wireless] in [Networkselection].
In order to use a wireless network, you must set up a connection to the
Wireless LAN Access Point (AP) (e.g. wireless router).
Wireless network setting (Auto)
Search for wireless networks automatically and select the wireless network
name (SSID) from the list.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to select
[Setup] > [Installation] > [Network] > [Manualnetworksettings] >
[Wirelessnetworksetting] > [Auto].
• This unit will start searching for wireless networks automatically.
2 The list of wireless networks will be displayed. Use Î /ï to select
the appropriate wireless network name (SSID), then press OK.
• If you select the wireless network name (SSID) with , WEP /
WPA Key entry screen will appear.
Enter the WEP / WPA key of the selected wireless network
using Î /ï/Í /Æ, then press OK.
[Clear] : Clear the entered number or word.
[Allclear]: Clear all the entered numbers or words.
[a/A/@] : Switch between abc, ABC and @ ! ?
[Cancel] : Shows the cancellation display.
[OK] : Set the entered number or word.
• If you select the wireless network name (SSID) has Wi-Fi
protected Setup (WPS), WPS setting screen will appear.Use
Î /ï/Í /Æ to select a setting and then press OK.
EN
![](asset-20.png)
31
EnglishFrançaisEspañol
Setting items Description
Easy connect
Select this setting if your router has a Wi-Fi
Protected Setup (WPS) button. Start scanning
for wireless networks on the TV after pressing
the WPS button on your router. If connection
test fails, refer to the router's manual for more
details.
WPS code
Select this setting if your router has Wi-Fi
Protected Setup (WPS) but does not have a
WPS button. Enter the 8-digit WPS PIN code
shown on your TV in the router settings menu
via PC before [Connect] is selected.
Manual
If your wireless network with authentication
setting (WEP, WPA-PSK or WPA2-PSK), WEP /
WPA Key entry screen will appear. Enter
the WEP / WPA key of the selected wireless
network using Î /ï/Í /Æ, then press OK.
[Clear]: Clear the entered number or word.
[All clear]: Clear all the entered numbers or
words.
[a/A/@]: Switch between abc, ABC and @ ! ?
[Cancel]:
Shows the cancellation display.
[OK]: Set the entered number or word.
• Conrmation message will appear. Select [Yes] to complete
the settings.
3 Press MENU to exit.
Note
• For a wireless network with authentication setting, key icon appears to the right hand
of the wireless network name (SSID).
• Signal icon shows the strength of the signal.
• WEP / WPA key appears as asterisks on the conrmation screen.
• The wireless LAN supports following specications.
- Wireless standards : IEEE 802.11 b/g/n
- Frequency spectrum : 2.4GHz
- Security protocol : WEP / WPA / WPA2
Wireless network setting (Manually enter your SSID)
Set up the connection to the Wireless LAN Access Point (AP) (e.g. wireless
router) manually by entering the wireless network name (SSID).
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Manual network
settings] > [Wireless network setting] > [Manually enter your SSID].
• Wireless LAN Access Point (AP) (e.g. wireless router) Name
(SSID) entry screen will appear.
Enter the wireless network name (SSID) using Î /ï/Í /Æ, then
press OK.
[Clear] : Clear the entered number or word.
[All clear] : Clear all the entered numbers or words.
[a/A/@] : Switch between abc, ABC and @ ! ?
[Cancel] : Shows the cancellation display.
[OK] : Set the entered number or word.
2 Use Î /ï to select the authentication setting of the selected
wireless network.
• For a wireless network with authentication setting, select the
authentication setting, according to the security type of the
wireless network.
• For a wireless network without authentication setting, select
[None].
[None]
Set the authentication setting to [None].
[WEP]
Set the authentication setting to [WEP].
[WPA-PSK]
Set the authentication setting to [WPA-PSK].
[WPA2-PSK]
Set the authentication setting to [WPA2-PSK].
• If you select [WEP], [WPA-PSK] or [WPA2-PSK], WEP / WPA
Key entry screen will appear.
Enter the WEP / WPA key of the selected wireless network
using Î /ï/Í /Æ, then press OK.
[Clear] : Clear the entered number or word.
[All clear] : Clear all the entered numbers or words.
[a/A/@] : Switch between abc, ABC and @ ! ?
[Cancel] : Shows the cancellation display.
[OK] : Set the entered number or word.
• Conrmation message will appear. Select [Yes] to complete
the settings.
3 Press MENU to exit.
IP conguration
In following cases, select [IP conguration] to set each setting as necessary.
- When connection test failed with the setting of [Connection test].
- When instructed by your internet service provider to make specic
settings in accordance with your network environment.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Manual network
settings] > [IP conguration].
2 Use Î /ï to select a setting and then press OK.
Setting items Description
IP setting mode Auto Sets the IP setting automatically.
Manual Sets the IP setting manually.
IP address *1, 3 A set of numbers which are assigned to
devices participating in a computer network.
Subnet mask *1, 3 A mask which is used to determine what
subnet an IP address belongs to.
Default gateway *1, 3 IP address of the network device (such as
router) which provides internet access.
DNS setting
mode
Auto Sets the DNS setting automatically.
Manual Sets the DNS setting manually.
Primary DNS *2, 3 A server which handles the name and IP
address over the internet.
Secondary DNS *2, 3 A server which handles the name and IP
address over the internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
Hardware Address.
*1 Items can be selected only when [IP setting mode] is set to [Manual].
*2 Items can be selected only when [DNS setting mode] is set to [Manual].
*3
Use Î /ï or the Number buttons to input numbers. When you press
Î /ï to input numbers then press OK or input the triple digits by using
the Number buttons, the cursor moves to the next entry field. When you
press Î /ï to input numbers then press OK or input the triple digits by using
the Number buttons at the rightmost entry field, numbers will be stored and
go back to the previous menu.
3 Press MENU to exit.
Note
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to [Auto].
• If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.
• If the entered IP address or the default gateway or primary DNS number is same
as the default setting, IP address setting will be set to [Auto]. (The manually entered
number will be saved).
• When IP address setting is set to [Manual], the setting of DNS setting will
automatically be [Manual] and when IP address setting is set to [Auto], you can set
either [Auto] or [Manual] for DNS setting.
EN
![](asset-21.png)
32 EN
Netfl ix ESN
Displays the ESN information.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [Netfl ix ESN].
• Displays the ESN (Electronic Serial Number) to get any
services from Netfl ix.
2 Press MENU to exit.
VUDU deactivation
Displays the deactivation setting for VUDU.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [VUDU deactivation].
2 Use
Î / ï to select the desired option, then press OK.
Setting items Description
Ye s
Deactivate the connection to VUDU.
No Activate the connection to VUDU.
3 Press MENU to exit.
YouTube deactivation
Displays the deactivation setting for YouTube.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [YouTube deactivation].
2 Use
Î / ï to select the desired option, then press OK.
Setting items Description
Ye s
Deactivate the connection to YouTube.
No Activate the connection to YouTube.
3 Press MENU to exit.
Proxy confi guration
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Installation] > [Network] > [Manual network
settings] > [Proxy confi guration].
2 Use
Î / ï to select a setting and then press OK.
• For default settings, select [Do Not Use].
• If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address
and port, select [Use].
Setting items Description
Proxy setting
Do not Use
Not use the proxy server.
Use Uses the proxy server.
Proxy address *
Selects the number or word by using
Î / ï/Í / Æ, then press OK.
[Clear]: Clear the entered number or word.
[All clear]: Clear all the entered numbers or
words.
[a/A/@]: Switch between abc, ABC and @ ! ?
[Cancel]:
Shows the cancellation display.
[OK]: Set the entered number or word.
Proxy port *Use Î / ï or the Number buttons to input
numbers.
* Items can be selected only when [Proxy port] is set to [Use].
3 Press MENU to exit.
Note
• The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
• If the proxy address is entered with blank only, proxy server setting will be set to
[Do Not Use].
Setting status
You can check the status of network settings.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Installation] > [Network] > [Setting status].
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
2 Press MENU to exit.
Reset network settings
You can reset the status of network settings.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Installation] > [Network] > [Reset network
settings] > [Start now].
2 Press OK to reset the network settings.
3 Press MENU to exit.
Netfl ix deactivation
Displays the deactivation setting for Netfl ix.
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [Netfl ix deactivation].
2 Use
Î / ï to select the desired option, then press OK.
Setting items Description
Ye s
Deactivate the connection to Netflix.
No Activate the connection to Netflix.
3 Press MENU to exit.
EN
![](asset-22.png)
33EN
EnglishFrançaisEspañol
DisconnectaUSBstoragedevice
Caution
• To avoid damaging the USB storage device always exit the on-screen menu and wait 5
seconds before you remove the USB storage device.
1 Press MENU to exit the on-screen menu.
2 Wait 5 seconds then remove the USB storage device.
ViewyourpictureonaUSBstoragedevice
1 In the USB content browser, use Î /ï to select [Picture].
2 Press Î /ï to select a le or a folder on the USB storage device.
Picture
Music
Video
Picture001.jpg
Picture002.jpg
Picture003.jpg
Picture001.jpg
02/02/2009 11:29 AM
2031 x 1434 pixels
3 Press OK or Æ∆ to start a slideshow of the les.
• Press OK or Æ∆ to pause the slide show.
»The ∆ icon appears.
• Press ¢ or ∫ to move between images.
• Press BACK or Ê to stop the slide show.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
Slidetime*1
Short Switches to the next image in 5 seconds.
Medium Switches to the next image in 10 seconds.
Long Switches to the next image in 15 seconds.
Transitions*1
None No effect when switching images.
Dissolve Overlaps a next image on a current image.
Wiperight Pushes a current image out from left.
Wipeleft Pushes a current image out from right.
Wipeup Pushes a current image out from bottom.
Wipedown Pushes a current image out from top.
Boxin A next image comes into the center from out.
Boxout A next image goes to the out from center.
Rotate*2
0Displays an image at its original direction.
90 Rotates an image clockwise by 90 degrees.
180 Rotates an image clockwise 180 degrees.
270 Rotates an image clockwise 270 degrees.
Zoom*2
1x Displays an image at its original size.
2x Magnifies a current image as twice.
4x Magnifies a current image as fourfold.
*1 You can set [Slidetime]and [Transitions] when images are in Slide show.
*2 You can set [Rotate] and [Zoom] when Slide show is in pause mode.
Viewphotos,playmusicandwatchvideoson
aUSBstoragedevice
Caution
• This unit accepts USB ash memory only. Other storage devices such as external
HDD by USB bus power will not work.
• Philips is not responsible if the USB storage device is not supported nor is it
responsible for damage or loss of data from the device.
Your TV is tted with a USB connection that enables you to view
photos or listen to music stored on a USB storage device.
Supported formats Not-supported formats
MP3 File name exceeding 256 characters
JPEG Progressive JPEG les
FAT / DOS-formatted memory
devices
File names containing a dot character
Itisrecommendedthatlestobeplayedbackinthisunitare
recordedunderthefollowingspecications:
<MP3>
• Sampling frequency : 32kHz or 44.1kHz or 48kHz
• Constant bit rate : 32kbps - 320kbps
<JPEG>
• Upper limit : 16Mpixel
<MPEG>
• Playable codec : MPEG1, MPEG2
• Maximum size of a video : 1920 x 1080
• Audio type : AC3, MPEG1 audio layer 3
(MP3), MPEG1 audio layer 2,
LPCM
Note
• A maximum of 1,023 folders or les can be recognized.
• Philips can not be held responsible if your USB storage device is not supported, nor
will Philips accept any liability for damage or loss of stored data.
• The USB storage device is not supplied with the TV.
• Do not use an extension cord and USB Hub to connect devices to this unit. Always
insert the USB ash memory in to this unit directly.
ConnectaUSBstoragedevice
1 Turn on the TV.
2 Connect the USB storage device to the USB port on the side of
your TV.
3 Use Î /ï/Í /Æ to select [BrowseUSB].
• Press OPTIONS to display the optional menu, then press OK
to switch between [List] and [Thumbnails].
Picture
Music
Video
2009/09/08
2009/09/09
2009/09/10
2009/09/11
Picture
Picture001.jpg
Picture002.jpg
EN
![](asset-23.png)
34 EN
WatchyourVideoonaUSBstoragedevice
1 In the USB content browser, use Î /ï to select [Video].
2 Press Î /ï to select a le or a folder on the USB storage device.
Picture
Music
Video
Video1.avi
Video2.mpg
Title: ...
Director: ...
Date: ...
3 Press OK or Æ∆ to play the selected les.
• Press OK or Æ∆ to pause, press OK or Æ∆ again to resume.
• Press ∫ to fast-forward search.
• Press ¢ to fast-backward search.
• Press Ê to stop playback.
»Press Æ∆ to resume from the point at which playback
was stopped. Press OK to play from the beginning of the
le at which playback was stopped.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
Subtitle
Not
available Displays if no subtitle is available.
SubtitleOff Set subtitle to off.
Subtitle1-8 Select the desired subtitle if the Video file
contains them.
Audiolanguage
Not
available
The unit displays if no audio language is
available.
Audio1-8 Select the desired audio language if the Video
file contains them.
TVspeakers
Off The sound will not be output from the unit's
speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Note
• The resume information will be kept even when the unit is turned off.
• If you play another le while the previously viewed le is being resumed, the resume
information of the previously viewed le will be deleted.
• The le or the folder in resume stop mode will be highlighted in gray on[List] or
[Thumbnails].
ListentomusiconaUSBstoragedevice
1 In the USB content browser, use Î /ï to select [Music].
2 Press Î /ï to select a le or a folder on the USB storage device.
Picture
Music
Video
Track1.mp3
Track2.mp3
Title: ...
Artist: ...
Album: ...
Duration: 00:03:41
Year:
3 Press OK or Æ∆ to play the selected les.
• Press OK or Æ∆ to pause, press OK or Æ∆ again to resume.
• Press ∫ to skip up the next le.
• Press ¢ to skip down the previous le.
• Press Ê to stop playback.
• Press OPTIONS to display the optional menu, then use Î /ï
to select the desired item.
Settingitems Description
Repeat
Off Sets repeat playback to off.
On Sets repeat playback for all MP3 files in the
current folder.
Shuffle
Off Sets shuffle playback to off.
On Sets shuffle playback for all MP3 files in the
current folder.
TVspeakers
Off The sound will not be output from the unit's
speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Note
• [TVSpeakers] will be displayed only when [MasterEasyLink] is set to [On].
(See ‘EasyLink’ on page 29.)
EN
![](asset-24.png)
35EN
EnglishFrançaisEspañol
Weakchannelinstallation
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setup.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Channels] > [Weakchannel
installation].
2 Use Í /Æ to select channel input box, then use Î /ï to select a
channel you want to memorize.
3 Use Í /Æ to select [Search], then press OK.
4 Display will be changed to [Store] from [Search] when the channel
is found, then press OK.
5 Press MENU to exit.
Note
• In most cases, digital channels are not broadcast on the RF channel on which they
appear on your TV. To add digital channels you need to know the RF channel on which
the digital channel is being broadcast. E.g. If there is a digital channel 9.1 which is being
broadcast on RF channel 25, you need to enter 25 while performing a weak channel
installation. To nd out the RF channel on which a particular digital channel is being
broadcast, please contact your local service provider.
Installing digital channels using [Weakchannelinstallation] might not work for direct
cable connections and if the digital signal is too weak for the TV to process.
Installationmode
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Channels] > [Installationmode].
2 Use Î /ï to select, then press OK.
3 Press MENU to exit.
Uninstallchannels
Those channels can still be selected with theNumberbuttons.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Channels] > [Uninstallchannels].
2 Use Î /ï
to select the channel you want to remove, then press OK.
• You will not be able to select the channel again using CH+/−.
• To reactivate a removed channel, use Î /ï and then press OK.
3 Press MENU to exit.
Returnyoursettingstodefaultvalues
When you return picture and sound settings to their default values the
channel installation settings are not affected.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [ResetAVsettings] > [Startnow].
2 Press OK to reset the picture and sound settings.
3 Press MENU to exit.
7 Installchannels
The rst time you set up your TV, you are prompted to select a menu
language and to install TV and digital radio channels (if available). This
chapter provides instructions on how to reinstall and ne-tune channels.
Selectingyourmenulanguage
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Language].
Picture
Sound
Features
Installation
Software
Language
Channels
Preferences
Network
Clock
Reset AV settings
English
Français
Español
2 Select a language and then press OK to conrm your choice.
3 Press MENU to exit.
Autoprogram
If you switch wires (e.g., between antenna and CATV) or if you move
the unit to a different area after the initial setting, you will need to
perform autoprogram.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Channels] > [Autoprogram] >
[Startnow].
System searching. Please wait...
Digital channels found: 0
Analog channels found: 0
Auto programming may take more than
20 minutes to complete.
Stop
2 Press OK to start the installation.
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in order
to complete the installation.
If you have forgotten your PIN, reset it as described in ‘Changing
your PIN’ on page 26.
• When autoprogramming is complete, the lowest memorized
channel will be displayed.
3 Follow the on-screen instructions to complete the installation.
![](asset-25.png)
36 EN
Updating software
USB update
You can update the software by using USB storage device.
1 If the TV is on, press . POWER at the side of the TV.
2 Connect your USB storage device with the update fi le to the USB
port on the side of your TV.
3 Switch on the TV.
4 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [Software update] > [USB].
5 Use
Î / ï to select the desired Update fi le.
6 Use
Î / ï to select [Yes], then press OK.
7 Read the on-screen instructions and confi rm that you want to
continue with the installation.
Software update is in progress. Please wait.
Do not remove the USB storage device or
turn the TV off while upgrade is in progress.
Update your TV with new software:
8 When the software update is complete, remove the USB storage
device.
9 Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
10 Switch on the TV.
»The TV starts up with the new software.
• The following messages are displayed without starting software
update when it doesn’t fulfi ll the update conditions.
Select a fi le No valid software fi le on the USB. Chec
Error
OK
8 Update your TV software
Philips continuously tries to improve its products and we strongly
recommend that you update the TV software when updates are available.
New software can be downloaded from our website at
www.philips.com/support
using the model number of your TV (e.g. 55PFL3907) to fi nd information.
Checking your current software version
1 Press MENU on the remote control and then use Î / ï/Í / Æ to
select [Setup] > [Software] > [Software information] > [Select].
»The version and a description of the current software is
displayed.
Picture
Sound
Features
Installation
Software
Software information XXXXX
Software update
Netfl ix deactivation
Netfl ix ESN
VUDU deactivation
YouTube deactivation
MediaConnect code
2 Press MENU to exit.
Preparing for the software update by USB
You require the following equipment :
• A PC with web browsing capability.
• An archive utility that supports the ZIP-format
(e.g. WinZip for Windows or StuffIt for Mac OS).
• An empty clean formatted USB stick.
Note
• Only FAT / DOS-formatted portable memory is supported.
• New software can be downloaded from www.philips.com/support
• Use only software updates that can be found on the Philips web site.
Warning
• When the software update is running, don’t press any buttons.
• Do not remove the USB storage device during the software update.
• If an error occurs during the update, retry the procedure or contact your dealer.
Downloading the software
1 On your PC, open a web browser and go to
www.philips.com/support
2 Find information and software related to your TV and download
the latest software update fi le to your PC.
3 Decompress the ZIP-fi le.
4 Copy the update fi le to the root directory of the USB storage device.
EN
![](asset-26.png)
37EN
EnglishFrançaisEspañol
Networkupdate
You can update the software by connecting the unit to the internet.
1 Follow steps 1 to 2 in ‘Connection test’ on page 30.
2 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [Softwareupdate] > [Network].
3 Use Í /Æ to select [Yes], then press OK.
• This unit will then start checking for the latest rmware
version.
4 Conrmation message will appear. Use Í /Æ to select [Yes], then
press OK.
• The unit will start downloading the latest rmware version.
• The unit will start updating the rmware version.
• It may take a while to complete the updating.
5 When the software update is complete, press POWER
. at the
side of the TV to make sure the unit goes to standby mode.
6 Switch on the TV.
»The TV starts up with the new software.
Note
• In order to update software via the internet, you must connect the unit to the internet
and set up necessary settings.
• For the network connection, refer to ‘Connecting the TV to the internet using an
Ethernet cable’ or ‘Connecting the TV to the internet using a wireless LAN’ on page 41.
• For the network setup, refer to ‘Network’ on page 30.
• Please do not unplug the AC power cord or Ethernet cable while executing the
‘Network update’.
• All settings will remain the same even if you update the software version.
• The version of Netix will also be updated if newer version of Netix is available when
updating the rmware.
![](asset-27.png)
38 EN
9 Connectdevices
This section describes how to connect various devices with different
connectors and supplements examples provided in the Quick Start Guide.
Connectionoverview
*
j
k
l
e
f
g
h
b
c
i
**
a
d
a Ethernetport
For internet connection using an Ethernet cable with a RJ-45
connector.
b Componentvideoandaudioinputjack
Video input from analog devices such as DVD, receiver, game
console, etc. This connector is used with audio input.
c Compositevideoandaudioinputjack
Video input for analog devices such as DVD, camcorder, game
console, etc. To be used with audio input.
d Digitalaudiooutputjack
Digital audio output to home theaters and other digital audio
systems.
e Antennainputjack
Signal input from an antenna, cable or satellite.
f HDMI1inputjack
First HDMI in connector.
Digital audio and video input from high denition digital devices
such as Blu-ray players.
In addition to normal HDMI functionality, outputs TV audio to an
HDMI ARC-compliant device, such as a home theater system.
(HDMI1only)
g HDMI2inputjack
Second HDMI in connector.
h HDMI3inputjack
Third HDMI in connector.
i USBterminal
Data input from USB storage devices only. Do not connect any
device to this terminal such as; digital camera, keyboard, mouse, etc.
j AudioinputjackforHDMI4andPC
k HDMI4inputjack
Fourth HDMI in connector.
l PCinputjack
VGA cable connection for PC.
*WirelessLAN(internal)
Please make sure that there are no obstacles between the TV
and the wireless router. Other devices and wireless routers using
the 2.4GHz spectrum might cause interference and dropouts in
connection. Refer to the user manual of your wireless router to
select the best transmission channel in your usage settings.
**serviceonly
For use by service personnel only.
Caution
• Disconnect the AC power cord before connecting devices.
Note
• Do not use an extension cord between the USB ash memory and the unit. Always
insert the USB ash memory to this unit directly.
• Different types of connectors may be used to connect a device to your TV, depending
on availability and your needs.
![](asset-28.png)
39EN
EnglishFrançaisEspañol
Selectingyourconnectionquality
HDMI-Highestquality
Supports high-denition signals and gives highest picture and sound
quality. Video and audio signals are combined in one cable. You must use
HDMI for full high-denition video and to enable Philips EasyLink.
Note
• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP
is a form of Digital Rights Management that protects high denition content in DVD
or Blu-ray Discs.
• The HDMI ARC connector on the TV features HDMI ARC functionality. This allows
output of TV audio to an HDMI ARC-compliant device.
Component(YPbPr)-Highquality
Component video cable (red / green / blue) and audio L/R cable (red / white).
Supports high-denition signals but gives lower picture quality than HDMI.
Component cables combine a red / green / blue video cable with a
red / white audio L/R cable. Match the cable colors when you connect
to the TV.
Composite-Basicquality
Composite video / audio cable (yellow / red / white)
For analog connections. Composite cables usually combine a yellow
video cable with a red / white audio L/R cable. Match the audio cable
colors when you connect to the TV.
Connectingyourdevices
This section describes how to connect a selection of devices with
different connectors. Different types of connectors can be used to
connect a device to your TV. The following sections describe examples
only, other congurations are possible.
Connectingaset-topbox,Blu-rayDiscplayerand
HDgameconsoleviaHDMI
OUT
OUT
HDMI
HDMI
OUT
IN
IN
HDMI
HDMI
HDMI
HDMI
set-topbox
Blu-rayDiscplayer
HDgameconsole
ConnectingaDVDplayer/recorderviaHDMI-DVIand
analogaudio
AUDIO
OUT
AUDIO
IN
AUDIO
IN
DVI OUT
HDMI4INonly
DVDplayer/recorder
![](asset-29.png)
40 EN
Connectingadigitalhometheaterampliferusing
HDMIARC
HDMI ARC
HDMI
HDMI
HDMI1INonly
digitalhometheateramplier
Note
• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to
output digital audio to an HDMI Home Theater System.
Connectingaset-topbox,DVDplayer/recordervia
componentvideoconnectors(YPbPr)andanalogaudio
OUT
OUT
IN ININ IN
YPbPr
YPbPr
DVDplayer/recorder
set-topbox
or
audioL/R
Note
• When you connect cables, match the cable colors to the connectors on the TV.
EN
Connectingaset-topbox,DVDrecorderviacomposite
connectorsandanalogaudio
RF IN
IN
OUT
OUT
RF INRF IN
RF OUT
RF OUT
ININ
DVDrecorder
audioL/R+video
set-topbox
cable
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
Connectingaset-topboxviaacompositeconnectorand
analogaudio
OUT
ININ
RF IN
audioL/R+video
set-topbox
cable
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
![](asset-2a.png)
41EN
EnglishFrançaisEspañol
ConnectingtheTVtotheinternetusinganEthernetcable
LAN
LAN WAN
54321
hubor
broadbandrouter
telecommunications
equipment(modem,etc.)
Ethernetcable
Ethernetcable
internet
Note
• Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
• After connecting an Ethernet cable, set up necessary network settings. (For the
network setup, refer to ‘Network’ on page 30.)
• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the Ethernet port of this unit.
ConnectingtheTVtotheinternetusingawirelessLAN
LAN
WAN
WirelessLAN
AccessPoint(AP)
(e.g.wirelessrouter)
networkequipment
(modem,etc.) Ethernetcable
internet
Note
• After you made the wireless connection, set up necessary network settings.
(For the network setup, refer to ‘Network’ on page 30.)
• Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
• This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network
connection.
Connectingadigitalhometheateramplierusingadigital
audiocoaxialcable
DIGITAL AUDIO
IN
OUT
OUT
digitalhometheateramplier
Note
• Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over
Digital Audio Output for certain channels, shows or segments during the broadcast.
![](asset-2b.png)
42 EN
ConnectingaPC
If you connect a PC with a VGA connector at the back.
AUDIO
OUT
AUDIO
IN
AUDIO
IN
PC
OUT
IN
IN
VGA
VGA
If you connect a PC with a HDMI-DVI connector.
AUDIO
OUT
AUDIO
IN
AUDIO
IN
PC
DVI OUT
HDMI4INonly
If you connect a PC with an HDMI or Display Port (HDMI-Display Port
conversion cable) connector.
ININ
IN
IN
PC
OUT
HDMI
HDMI
Adddevices
After connecting devices, assign the device attached to each connector.
This allows you to easily identify devices connected to your TV.
1 Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Addnewdevices].
2 Use Í /Æ to select [Start], then press OK.
3 Use Î /ï to select a device and press OK.
4 Use Î /ï to select the connector your device is connected to and
press OK.
5 If there is video and audio output, press OK.
Repeat the procedure until all devices are correctly assigned to connectors.
Removedevices
If a device is no longer connected to the TV, remove it from the home
menu.
1 Press MENU on the remote control.
2 Use Î /ï/Í /Æ to select a device to remove.
3 Press OPTIONS.
4 Use Î /ï to select [Removedevice], then press OK.
5 Use Í /Æ to select [OK], then press OK.
Note
HDMI/DisplayPortAudioSpecics:
• To hear your PC audio from the TV speakers, make sure the default playback device is
the HDMI Audio Device and not your computer speakers / soundcard.
• The HDMI Audio device is a child device on your graphics card, which means your
graphics card video & HDMI audio drivers need to be up to date and bug free (we
have seen many cases where having a bad video driver resulted in no HDMI audio).
• Make the TV the only output device. Sometimes if you extend your desktop to the TV
or duplicate the desktop with another monitor or your laptop screen, Windows does
not make the HDMI audio devices as the default audio playback device.
EN
![](asset-2c.png)
43EN
EnglishFrançaisEspañol
10Troubleshooting
Problem Possible cause and solution
No power or indicator light. The TV is not connected to the power.
Press . POWER at the side of the TV or on the remote control.
Ensure that the AC power cord is connected tightly to the TV power
connector and to the power socket outlet.
Remove the AC power cord from the power socket outlet, wait 60
seconds and reconnect the AC power cord.
Connect the TV to a different power socket outlet.
No picture or sound is
detected from the device
using HDMI 1-4 input jack.
HDCP authentication fail.
Ensure that your HDMI cable is certified.
Press SOURCE on the remote control to switch to another source
and then switch back to the HDMI source.
Reset the accessory device and the TV.
Turn on the TV.
Select the HDMI channel.
Turn on the accessory device.
While the TV and the accessory device are powered on, unplug either
end of the HDMI cable and then reinsert the cable.
No sound is detected from
the PC using PC input jack.
An audio cable is not connected.
Connect an audio cable to the PC / HDMI 4 AUDIO IN on the TV.
Press SOURCE on the remote control, and select the PC source.
No picture or sound is
detected from the PC using
HDMI 4 input jack.
An incorrect HDMI input jack is connected or an audio cable is not
connected.
Connect a HDMI-DVI cable to the HDMI 4 input jack on the TV.
Connect an audio cable to the PC / HDMI 4 AUDIO IN on the TV.
Press SOURCE on the remote control, and select the HDMI 4 source.
TV does not respond to
the remote control.
Batteries are installed incorrectly, or low battery power.
Ensure that you are using the TV remote control.
Ensure that the batteries are inserted correctly and do not need to
be replaced.
Remove the AC power cord from the power socket outlet, wait 60
seconds and reconnect the AC power cord.
The picture is distorted,
stretched out, or has black
bars on the side or top.
Broadcast video format.
Press FORMAT on the remote control to select the best picture
format.
For some accessory devices, the picture format must be set in the
accessory device.
The picture is mostly red
and green, or the picture
misses red when connected
to an accessory device via
component cables.
Insecure / incorrect connection.
Ensure all the connections are made according to the color code.
Push the component cables all the way into the YPbPr sockets on the
TV.
No picture or sound. No picture or sound - ensure you have selected the correct channel.
Incomplete channel installation.
If the TV receives channels via an AV connection, set the TV to the
correct source input.
If the TV is connected directly to the wall via a coaxial connection,
perform the autoprogram again.
No sound on the TV
loudspeaker.
Volume level is set to zero - increase the volume.
Sound is muted - press MUTE on the remote control.
Audio cable is not connected - for AV connection, ensure that the
Audio L/R cable is connected as described in Connecting your devices.
(See ‘Connecting your devices’ on page 39.) If you use a component
cable, ensure that you have not crossed the red audio cable with the
red video cable.
Audio output setting for the accessory device is incorrect. For HDMI
connections, some accessory devices have an HDMI audio output
setting that must be turned on for HDMI to HDMI connections.
Check if [Sound] > [TVSpeakers] >[Off] is set to [On].
No sound will be output when[TVSpeakers]is set to[Off].
Bad picture quality with a
coaxial connection.
Standard definition channels are not as clear as high definition channels
- connect the devices via component or HDMI cables.
Cannot control your TV
and connected devices with
one remote control.
Confirm that the connected devices are EasyLink compliant and are
connected to your TV via an HDMI cable. Not all brands of devices
such as Blu-ray Disc players use the same system as Philips EasyLink.
Other brands might not work with Philips EasyLink.
Folder or files stored on
DLNA home media server
are not displayed in the
file list or cannot be played
back.
Check the setting on your home media server.
(Refer to the user manual of the home media server.)
Check the network connection and settings.
Cannot use Netflix feature. Netflix is available only in the United States.
Check if the network connection is properly made.
Visit www.netflix.com/Philips on your PC and become a Netflix
member.
Cannot add movies or TV
episodes to the Instant
Queue.
Visit www.netflix.com on your PC.
Cannot use VUDU feature. VUDU is available only in the United States.
Check if the network connection is properly made.
Cannot rent or buy
movies / TV episodes on
VUDU.
You need to activate the VUDU account. (Refer to page 17.)
Log into your account at http://my.vudu.com and check your payment
information.
The picture quality of
streaming movie (Netflix,
Film Fresh or VUDU) is
poor.
Check the speed of your internet connection. You need speeds of at
least 8 Mbps to this player for high quality uninterrupted playback.
Streaming movie (Netflix,
Film Fresh or VUDU) often
stops or starts buffering
during playback.
Contact your internet service provider to troubleshoot your internet
connection for speed and line quality. Consistent line quality and speed
are very important for internet video playback.
Even though the speed of
the internet connection
improves during playback,
the picture quality of Netflix
streaming movie does not
improve.
The picture quality does not change during playback.
The picture quality differs depending on the speed of internet
connection at the time of loading.
Cannot use Film Fresh
feature.
Film Fresh is available only in the United States.
Check if the network connection is properly made.
Visit http://filmfresh.roxionow.com/ (Film Fresh) on your PC and create
an account.
Cannot use Pandora®
feature.
Check if the network connection is properly made.
Pandora is available only in the United States.
You must create a Pandora account and activate this unit.
(Refer to ‘Activating Pandora’ on page 19.)
The audio of internet radio
station interrupted.
vTuner server, station or the internet connection is busy.
The bit rate of the station is high.
Cannot connect to the
network.
Check if the Ethernet cable connection is properly made.
Turn on the modem or broadband router.
Check the network settings.
Check if the broadband router and/or modem is correctly connected.
Cannot connect to the
network while my PC is
connected to the network.
Check the content of your internet service contract to see if your
internet Service Provider prevents multiple terminals connecting at the
same time.
Cannot play back internet
radio.
Check if the network connection is properly made.
Check the firewall setting of the modem or router.
For some stations, playback is not available on this unit.
The quality of the internet
radio audio is poor or noise
occurs during playback of
internet station.
The bit rate of the station is low.
Cannot use the wireless
connection.
Check if the Wireless LAN Access Point (AP) (e.g. wireless router) is
oriented properly or not placed too close between them.
Once you have activated the wireless connection please wait 30
seconds for the connection to be established after turning on the unit,
before trying to access network features such as Net TV.
Cannot get into the
PC's screen even the Philips
Wireless MediaConnect is
launched.
The start up screen (PHILIPS logo with spinning circle) keep
displaying until the unit found the PC that is running Philips Wireless
MediaConnect.
Make sure if the network connection is connected properly.
Check if your PC runs Philips Wireless MediaConnect.
Make sure your TV and PC are connected on the same network.
I have a 1.8GHz CPU but
MediaConnect does not
work on my PC.
For smooth operation of your PC while Philips MediaConnect is running
you need a mainstream dual core processor from Intel® or AMD.
Intel® : Core™2Duo or Core™ i3/5/7 @ 1.8GHz or higher.
AMD : Athlon II X2, Turion II Dual-Core™ or Phenom X2 @ 2GHz or
higher.
Downloadinganelectroniccopy
To obtain an electronic copy of this manual :
1 Point your browser to www.philips.com/support
2 Choose your country of location.
3 Enter the model number or a keyword in the “ Find your product ”
eld. Alternatively, you can browse the catalog.
4 Click the description or model.
5 Under Product support, click “ User manuals ”.
Contactus
If you cannot resolve your problem, refer to the FAQ for this TV at
www.philips.com/support
If the problem remains unresolved, contact the Customer Support
Center in your country.
Warning
• Do not attempt to repair the TV yourself. This may cause severe injury, irreparable
damage to your TV or void your warranty.
Note
• Please have available your TV model and serial number before contacting us. These
numbers are available on the back and side of your TV, as well as on the packaging.
![](asset-2d.png)
44 EN
11Specifications
Note
• Specications are subject to change without prior notice.
Pictureenhancement
Type : 1080p 120Hz
Aspect ratio : 16:9
Viewing angles : 178° (V) by 178° (H)
Built-in digital tuner : ATSC
Soundenhancement
Mono / Stereo : Mono, Stereo, SRS TruSurround HD™
Power output
(RMS watts) :
20 W
Equalizer : 5 band
Easeofuse
Video modes : Automatic, 4:3, Movie Expand 14:9,
Movie Expand 16:9, Super Zoom,
Wide Screen, Unscaled
PC input : via VGA, HDMI
Photo slide show : Yes (jpeg les only)
MP3 playback : Yes (mp3 les only)
Video playback : Yes (MPEG1 / 2)
Connections
Component video
input with audio L/R :
1
Supporting video signals : 480i/p, 720p, 1080i
60Hz, 1080p 24 / 30 / 60Hz
Composite video input
with audio L/R :
1
HDMI : 4
Supporting video signals : 480i/p, 720p, 1080i
60Hz, 1080p 24 / 30 / 60Hz
PC input : up to 1920 x 1080 60Hz
HDMI ARC (HDMI 1 only)
3.5mm stereo miniplug
shared use for HDMI 4
and PC input :
1
PC input : 1
up to 1920 x 1080 60Hz
Digital audio output : 1
Supporting Dolby Digital and PCM
USB : 1
Wireless LAN : Supporting wireless standards :
IEEE 802.11 b/g/n (2.4GHz)
Ethernet port : 1
Power
Power requirements : 120V~ AC +/− 10%, 60Hz +/− 0.5%
![](asset-2e.png)
45EN
EnglishFrançaisEspañol
12Warranty
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to new company manufac-
tured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products pack-
aged with the bundled product.
The company is not liable for any damage to or loss of any pro-
grams, data, or other information stored on any media contained
within the product, or other additional product or part not cov-
ered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
or a part that has been modified without written company per-
mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 309 0843
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
061708
![](asset-2f.png)
46 EN
13Index
A
Antenna,connect 9
Audio 24
Audiosetting 24
Automode 24
AutoTVon 29
Autovolumeleveling 24
C
Cables
component 39
composite 39
connection quality 39
HDMI 39
manage cables 10
YPbPr 39
Channels
install 35
lock 27
Childlock
channel lock 27
PIN 26
ratings lock 26, 27, 28
Clock 25
Closedcaption 25, 26
CloudTV 17
Connections 9, 38, 39
Controls 6
Customersupportservice 5
D
DeviceList 29
Devicelock 14
E
EasyLink 29
Environmentalcare 5
Equalizer 24
F
FAV 24, 25
FilmFresh 17
H
Homemode 11, 30
I
Initialsetup 11
L
Location(RetailstoreorHome) 11, 30
M
MasterEasyLink 29
MountingstandontoTV 8
N
Netix 17
Network 30
P
Pandora 19, 20
PC 22
PhilipsWirelessMediaConnect 15
Pictureformat 23
Picturesettings 22
R
Ratings 26, 27, 28
RCkeyforwarding 14, 29
Remotecontrol
insert batteries 8
overview 6, 7
Retailstoremode 11, 30
S
Settingsassistant 11, 22
Signalquality 39
Sleeptimer 26
Software
update 36
version 36
SpeakersEasyLink 24, 34
Specications 44
Standby 6, 12
T
Troubleshooting 43
TV
as PC monitor 23, 24, 42
connections 9, 38, 39
controls 6
menu 14
position 8
remote control 6, 7, 8
screen care 5
software 36
switch channels 12
switch on 11, 12
TV Speakers 24
Twitter 20
U
USB 33, 34
V
Volume
adjust 13
auto volume leveling 24
mute 13
vTuner 17
VUDU 17
W
Warranty 45
WirelessLAN 30, 41
Y
YPbPr 39
![](asset-30.png)
I
License
This section describes software license used for this product.
This product uses some open source software:
GPL software: linux, gcc, binutils, busybox, dhcpcd
LGPL software: directfb, glibc, Qt, LiTE
BSD: WPA Supplicant
MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2, c-ares
Free Type, LibJPEG, Open SSL, JSON_Parser, gSOAP, libcurl, Open GL
GPL
The GNU General Public License (GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing
it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its users. This General Public License
applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the
GNU Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free software
(and charge for this service if you wish), that you receive source code or can get it if you want it,
that you can change the software or use pieces of it in new free programs; and that you know you
can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or
to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if
you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give
the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The “Program”, below, refers to any such program or work, and a “work based on the
Program” means either the Program or any derivative work under copyright law: that is to say,
a work containing the Program or a portion of it, either verbatim or with modifications and/
or translated into another language. (Hereinafter, translation is included without vlimitation in
the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output
from the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends
on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive
it, in any medium, provided that you conspicuously and appropriately publish on each copy
an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute such modifications or work under the terms
of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or
is derived from the Program or any part thereof, to be licensed as a whole at no charge to
all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must
cause it, when started running for such interactive use in the most ordinary way, to print
or display an announcement including an appropriate copyright notice and a notice that
there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the distribution of the whole must
be on the terms of this License, whose permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely
by you; rather, the intent is to exercise the right to control the distribution of derivative or collective
works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with
a work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you also
do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for
a charge no more than your cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange;
or,
c) Accompany it with the information you received as to the offer to distribute corresponding
source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making modifications
to it. For an executable work, complete source code means all the source code for all modules
it contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not compelled
to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided
under this License. Any attempt otherwise to copy, modify, sublicense or distribute the
Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions
on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse
you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit
royalty-free redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain
entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply and the section as a whole is intended to apply
in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system;
it is up to the author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number
of this License which applies to it and “any later version”, you have the option of following
the terms and conditions either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of this License, you
may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
![](asset-31.png)
II
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/
OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE
OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the
best way to achieve this is to make it free software which everyone can redistribute and change
under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least
the “copyright” line and a pointer to where the full notice is found.
one line to give the program’s name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA. Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive
mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with
ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are
welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General
Public License. Of course, the commands you use may be called something other than `show w’ and
`show c’; they could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which makes
passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit linking
proprietary applications with the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
If you are interested in obtaining GPL source code used in this product, please contact
Open Source Team, P&F USA, Inc., PO Box 2248, Alpharetta, GA 30023-2248.
LGPL
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU
Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or the
ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish); that you receive source code or can get it if you
want it; that you can change the software and use pieces of it in new free programs; and that you
are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights
or to ask you to surrender these rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You must make sure that they, too, receive or can get
the source code. If you link other code with the library, you must provide complete object files to
the recipients, so that they can relink them with the library after making changes to the library and
recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should know
that what they have is not the original version, so that the original author’s reputation will not be
affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to
make sure that a company cannot effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that any patent license obtained for
a version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated libraries,
and is quite different from the ordinary General Public License. We use this license for certain
libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination
of the two is legally speaking a combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the entire combination fits its criteria
of freedom. The Lesser General Public License permits more lax criteria for linking other code
with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s
freedom than the ordinary General Public License. It also provides other free software developers
Less of an advantage over competing non-free programs. These disadvantages are the reason we
use the ordinary General Public License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use
of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must
be allowed to use the library. A more frequent case is that a free library does the same job as
widely used non-free libraries. In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number
of people to use a large body of free software. For example, permission to use the GNU C Library
in non-free programs enables many more people to use the whole GNU operating system, as well
as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure
that the user of a program that is linked with the Library has the freedom and the wherewithal to
run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a “work based on the library” and a “work that uses the
library”. The former contains code derived from the library, whereas the latter must be combined
with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice
placed by the copyright holder or other authorized party saying it may be distributed under the
terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as
“you”.
A “library” means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and data)
to form executables.
The “Library”, below, refers to any such software library or work which has been distributed
under these terms. A “work based on the Library” means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to
it. For a library, complete source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted,
and output from such a program is covered only if its contents constitute a work based on the
Library (independent of the use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices
that refer to this License and to the absence of any warranty; and distribute a copy of this
License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the
files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under
the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an
application program that uses the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that, in the event an application
does not supply such function or table, the facility still operates, and performs whatever part
of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must be optional: if the application
does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Library, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Library, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the entire whole,
and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Library.
III
In addition, mere aggregation of another work not based on the Library with the Library (or
with a work based on the Library) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make any
other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program
that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to
copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a “work that uses the Library”.
Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the
scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a “work that
uses the library”. The executable is therefore covered by this License. Section 6 states terms
for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the Library,
the object code for the work may be a derivative work of the Library even though the source
code is not. Whether this is true is especially significant if the work can be linked without the
Library, or if the work is itself a library. The threshold for this to be true is not precisely defined
by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and
small macros and small inline functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing
this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for
the work under the terms of Section 6. Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the
Library” with the Library to produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms permit modification of the
work for the customer’s own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and
that the Library and its use are covered by this License. You must supply a copy of this License.
If the work during execution displays copyright notices, you must include the copyright notice
for the Library among them, as well as a reference directing the user to the copy of this
License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for
the Library including whatever changes were used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work is an executable linked with the Library,
with the complete machine-readable “work that uses the Library”, as object code and/or
source code, so that the user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood that the user who changes
the contents of definitions files in the Library will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism
is one that (1) uses at run time a copy of the library already present on the user’s computer
system, rather than copying library functions into the executable, and (2) will operate properly
with a modified version of the library, if the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same
user the materials specified in Subsection 6a, above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer
equivalent access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already
sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any
data and utility programs needed for reproducing the executable from it. However, as a
special exception, the materials to be distributed need not include anything that is normally
distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library
and of the other library facilities is otherwise permitted, and provided that you do these two
things:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based
on the Library, and explaining where to find the accompanying uncombined form of the same
work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or
modify the Library subject to these terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse
you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a patent license would not permit
royalty-free redistribution of the Library by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain
entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply, and the section as a whole is intended to apply
in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system which is implemented by
public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system;
it is up to the author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number
of this License which applies to it and “any later version”, you have the option of following
the terms and conditions either of that version or of any later version published by the Free
Software Foundation. If the Library does not specify a license version number, you may
choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For
software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER
OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we
recommend making it free software that everyone can redistribute and change. You can do so
by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary
General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the
start of each source file to most effectively convey the exclusion of warranty; and each file should
have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>Copyright (C) <year>
<name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU
Lesser General Public License as published by the Free Software Foundation; either version 2.1 of
the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
![](asset-33.png)
IV
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking
knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
If you are interested in obtaining LGPL source code used in this product, please contact
Open Source Team, P&F USA, Inc., PO Box 2248, Alpharetta, GA 30023-2248.
BSD
“Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi> and contributors All Rights Reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors
may be used to endorse or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
“”AS IS”” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.”
MIT
--------------------------------------------
• expat
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
--------------------------------------------
• lua
Copyright © 1994 -2010 Lua.org, PUC-Rio.
--------------------------------------------
• lua-xmlreader
Copyright © 2008 A.S. Bradbury
--------------------------------------------
• lua-slncrypto
Copyright © 2005 Malete Partner, Berlin, partner@malete.org
--------------------------------------------
• libxml2
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.
--------------------------------------------
• c-ares
Copyright 1998 by the Massachusetts Institute of Technology.
--------------------------------------------
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the “Software”), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/
or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Free Type
Portions of this software are copyright (c) 2006, 2007, 2008, 2009 The FreeType Project (www.
freetype.org). All rights reserved.
LibJPEG
This software is based in part on the work of the Independent JPEG Group.
Open SSL
LICENSE ISSUES
==========
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License
and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually
both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL
please contact openssl-core@openssl.org.
OpenSSL License
----------------------
/* ===============================================
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modication, are permit-
ted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of condi-
tions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the follow-
ing acknowledgment: “This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” ap-
pear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This
product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EX-
PRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBU-
TORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS IN-
TERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
===============================================
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
This product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
-----------------------------
/*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions
are aheared to. The following conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with
this distribution is covered by the same copyright terms except that the holder is Tim Hudson
(tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online
or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modication, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of condi-
tions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the fol-
lowing acknowledgement: “This product includes cryptographic software written by Eric
Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from
the library being used are not cryptographic related :-).
4. If you include any Windows specic code (or a derivative thereof) from the apps directory
(application code) you must include an acknowledgement: “This product includes software
written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS-
CLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUP-
TION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-
TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARIS-
ING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under another
distribution licence
[including the GNU Public Licence.]
JSON_Parser
Copyright (c) 2005 JSON.org
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the “Software”), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/
or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
The Software shall be used for Good, not Evil.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
![](asset-34.png)
V
gSOAP
gSOAP Public License
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All
Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.”
libcurl
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee
is hereby granted, provided that the above copyright notice and this permission notice appear in
all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising
or otherwise to promote the sale, use or other dealings in this Software without prior written
authorization of the copyright holder.
Open GL
Notice
License Applicability. Except to the extent portions of this le are made subject to an alternative
license as permitted in the SGI Free Software License B, Version 1.0 (the “License”), the contents
of this le are subject only to the provisions of the License. You may not use this le except in
compliance with the License. You may obtain a copy of the License at Silicon Graphics, Inc., attn:
Legal Services, 1600 Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
http://oss.sgi.com/projects/FreeB
Note that, as provided in the License, the Software is distributed on an “AS IS” basis, with ALL
EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PAR-
TICULAR PURPOSE, AND NON-INFRINGEMENT.
Original Code. The Original Code is: OpenGL Sample Implementation, Version 1.2.1, released
January 26, 2000, developed by Silicon Graphics, Inc. The Original Code is Copyright (c) 1991-
2000 Silicon Graphics, Inc. Copyright in any portions created by third parties is as indicated
elsewhere herein. All Rights Reserved.
Additional Notice Provisions: The application programming interfaces established by SGI in con-
junction with the Original Code are The OpenGL(R) Graphics System: A Specication (Version
1.2.1), released April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version 1.3),
released November 4, 1998; and OpenGL(R) Graphics with the X Window System(R) (Version
1.3), released October 19, 1998. This software was created using the OpenGL(R) version 1.2.1
Sample Implementation published by SGI, but has not been independently veried as being
compliant with the OpenGL(R) version 1.2.1 Specication.
SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000])
1. Definitions.
1.1. “Additional Notice Provisions” means such additional provisions as appear in the Notice in
Original Code under the heading “Additional Notice Provisions.”
1.2. “Covered Code” means the Original Code or Modifications, or any combination thereof.
1.3. “Hardware” means any physical device that accepts input, processes input, stores the results
of processing, and/or provides output.
1.4. “Larger Work” means a work that combines Covered Code or portions thereof with code
not governed by the terms of this License.
1.5. “Licensable” means having the right to grant, to the maximum extent possible, whether at the
time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.
1.6. “License” means this document.
1.7. “Licensed Patents” means patent claims Licensable by SGI that are infringed by the use or sale
of Original Code or any Modifications provided by SGI, or any combination thereof.
1.8. “Modifications” means any addition to or deletion from the substance or structure of the
Original Code or any previous Modifications. When Covered Code is released as a series of
files, a Modification is:
A. Any addition to the contents of a file containing Original Code and/or addition to or deletion
from the contents of a file containing previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.9. “Notice” means any notice in Original Code or Covered Code, as required by and in
compliance with this License.
1.10. “Original Code” means source code of computer software code that is described in
the source code Notice required by Exhibit A as Original Code, and updates and error
corrections specifically thereto.
1.11. “Recipient” means an individual or a legal entity exercising rights under, and complying with
all of the terms of, this License or a future version of this License issued under Section 8. For
legal entities, “Recipient” includes any entity that controls, is controlled by, or is under common
control with Recipient. For purposes of this definition, “control” of an entity means (a) the
power, direct or indirect, to direct or manage such entity, or (b) ownership of fifty percent
(50%) or more of the outstanding shares or beneficial ownership of such entity.
1.12. “Recipient Patents” means patent claims Licensable by a Recipient that are infringed by the use
or sale of Original Code or any Modifications provided by SGI, or any combination thereof.
1.13. “SGI” means Silicon Graphics, Inc.
1.14. “SGI Patents” means patent claims Licensable by SGI other than the Licensed Patents.
2. License Grant and Restrictions.
2.1. SGI License Grant. Subject to the terms of this License and any third party intellectual
property claims, for the duration of intellectual property protections inherent in the Original
Code, SGI hereby grants Recipient a worldwide, royalty-free, non-exclusive license, to do the
following: (i) under copyrights Licensable by SGI, to reproduce, distribute, create derivative
works from, and, to the extent applicable, display and perform the Original Code and/or
any Modifications provided by SGI alone and/or as part of a Larger Work; and (ii) under
any Licensable Patents, to make, have made, use, sell, offer for sale, import and/or otherwise
transfer the Original Code and/or any Modifications provided by SGI. Recipient accepts the
terms and conditions of this License by undertaking any of the aforementioned actions. The
patent license shall apply to the Covered Code if, at the time any related Modification is added,
such addition of the Modification causes such combination to be covered by the Licensed
Patents. The patent license in Section 2.1(ii) shall not apply to any other combinations that
include the Modification. No patent license is provided under SGI Patents for infringements
of SGI Patents by Modifications not provided by SGI or combinations of Original Code and
Modifications not provided by SGI.
2.2. Recipient License Grant. Subject to the terms of this License and any third party intellectual
property claims, Recipient hereby grants SGI and any other Recipients a worldwide, royalty-
free, non-exclusive license, under any Recipient Patents, to make, have made, use, sell, offer for
sale, import and/or otherwise transfer the Original Code and/or any Modifications provided
by SGI.
2.3. No License For Hardware Implementations. The licenses granted in Section 2.1 and 2.2 are
not applicable to implementation in Hardware of the algorithms embodied in the Original
Code or any Modifications provided by SGI .
3. Redistributions.
3.1. Retention of Notice/Copy of License. The Notice set forth in Exhibit A, below, must be
conspicuously retained or included in any and all redistributions of Covered Code. For
distributions of the Covered Code in source code form, the Notice must appear in every
file that can include a text comments field; in executable form, the Notice and a copy of
this License must appear in related documentation or collateral where the Recipient’s rights
relating to Covered Code are described. Any Additional Notice Provisions which actually
appears in the Original Code must also be retained or included in any and all redistributions
of Covered Code.
3.2. Alternative License. Provided that Recipient is in compliance with the terms of this License,
Recipient may, so long as without derogation of any of SGI’s rights in and to the Original
Code, distribute the source code and/or executable version(s) of Covered Code under (1)
this License; (2) a license identical to this License but for only such changes as are necessary
in order to clarify Recipient’s role as licensor of Modications; and/or (3) a license of Recipi-
ent’s choosing, containing terms different from this License, provided that the license terms
include this Section 3 and Sections 4, 6, 7, 10, 12, and 13, which terms may not be modied
or superseded by any other terms of such license. If Recipient elects to use any license
other than this License, Recipient must make it absolutely clear that any of its terms which
differ from this License are offered by Recipient alone, and not by SGI. It is emphasized that
this License is a limited license, and, regardless of the license form employed by Recipient in
accordance with this Section 3.2, Recipient may relicense only such rights, in Original Code
and Modications by SGI, as it has actually been granted by SGI in this License.
3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as a
result of any such alternative license terms Recipient offers.
4. Termination. This License and the rights granted hereunder will terminate automatically if
Recipient breaches any term herein and fails to cure such breach within 30 days thereof. Any
sublicense to the Covered Code that is properly granted shall survive any termination of this
License, absent termination by the terms of such sublicense. Provisions that, by their nature,
must remain in effect beyond the termination of this License, shall survive.
5. No Trademark Or Other Rights. This License does not grant any rights to: (i) any software
apart from the Covered Code, nor shall any other rights or licenses not expressly granted
hereunder arise by implication, estoppel or otherwise with respect to the Covered Code;
(ii) any trade name, trademark or service mark whatsoever, including without limitation any
related right for purposes of endorsement or promotion of products derived from the
Covered Code, without prior written permission of SGI; or (iii) any title to or ownership of
the Original Code, which shall at all times remains with SGI. All rights in the Original Code not
expressly granted under this License are reserved.
6. Compliance with Laws; Non-Infringement. There are various worldwide laws, regulations, and
executive orders applicable to dispositions of Covered Code, including without limitation
export, re-export, and import control laws, regulations, and executive orders, of the U.S.
government and other countries, and Recipient is reminded it is obliged to obey such laws,
regulations, and executive orders. Recipient may not distribute Covered Code that (i) in any
way infringes (directly or contributorily) any intellectual property rights of any kind of any
other person or entity or (ii) breaches any representation or warranty, express, implied or
statutory, to which, under any applicable law, it might be deemed to have been subject.
7. Claims of Infringement. If Recipient learns of any third party claim that any disposition of
Covered Code and/or functionality wholly or partially infringes the third party’s intellectual
property rights, Recipient will promptly notify SGI of such claim.
8. Versions of the License. SGI may publish revised and/or new versions of the License from
time to time, each with a distinguishing version number. Once Covered Code has been
published under a particular version of the License, Recipient may, for the duration of the
license, continue to use it under the terms of that version, or choose to use such Covered
Code under the terms of any subsequent version published by SGI. Subject to the provisions
of Sections 3 and 4 of this License, only SGI may modify the terms applicable to Covered
Code created under this License.
9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED “AS IS.” ALL EXPRESS
AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY AND
PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE
IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR OR
CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS
LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT
SUBJECT TO THIS DISCLAIMER.
VI
10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY,
WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT
LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, COMPUTER FAILURE
OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES,
EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR
DEATH OR PERSONAL INJURY RESULTING FROM SGI’s NEGLIGENCE TO THE EXTENT
APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT.
11. Indemnity. Recipient shall be solely responsible for damages arising, directly or indirectly, out of
its utilization of rights under this License. Recipient will defend, indemnify and hold harmless
Silicon Graphics, Inc. from and against any loss, liability, damages, costs or expenses (including
the payment of reasonable attorneys fees) arising out of Recipient’s use, modification,
reproduction and distribution of the Covered Code or out of any representation or warranty
made by Recipient.
12. U.S. Government End Users. The Covered Code is a “commercial item” consisting of
“commercial computer software” as such terms are defined in title 48 of the Code of Federal
Regulations and all U.S. Government End Users acquire only the rights set forth in this License
and are subject to the terms of this License.
13. Miscellaneous. This License represents the complete agreement concerning the its subject
matter. If any provision of this License is held to be unenforceable, such provision shall be
reformed so as to achieve as nearly as possible the same legal and economic effect as the
original provision and the remainder of this License will remain in effect. This License shall be
governed by and construed in accordance with the laws of the United States and the State
of California as applied to agreements entered into and to be performed entirely within
California between California residents. Any litigation relating to this License shall be subject
to the exclusive jurisdiction of the Federal Courts of the Northern District of California (or,
absent subject matter jurisdiction in such courts, the courts of the State of California), with
venue lying exclusively in Santa Clara County, California, with the losing party responsible for
costs, including without limitation, court costs and reasonable attorneys fees and expenses.
The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation that provides that the language of a
contract shall be construed against the drafter shall not apply to this License.
Exhibit A
License Applicability. Except to the extent portions of this file are made subject to an alternative
license as permitted in the SGI Free Software License B, Version 1.1 (the “License”), the contents
of this file are subject only to the provisions of the License. You may not use this file except in
compliance with the License. You may obtain a copy of the License at Silicon Graphics, Inc., attn:
Legal Services, 1600 Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
http://oss.sgi.com/projects/FreeB
Note that, as provided in the License, the Software is distributed on an “AS IS” basis, with ALL
EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT.
Original Code. The Original Code is: [name of software, version number, and release date],
developed by Silicon Graphics, Inc. The Original Code is Copyright (c) [dates of first publication,
as appearing in the Notice in the Original Code] Silicon Graphics, Inc. Copyright in any portions
created by third parties is as indicated elsewhere herein. All Rights Reserved.
Additional Notice Provisions: [such additional provisions, if any, as appear in the Notice in the
Original Code under the heading “Additional Notice Provisions”]
![](asset-36.png)
A17RHUH / A17RFUD
P&F USA, Inc.
PO Box 2248, Alpharetta, GA 30023-2248
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México C.P. 52787
Philips and Philips Shield are used under license of
Koninklijke Philips Electronics N.V.