Philips Tsi640099 Quick Start Guide IPronto QSG E V1_6
Philips-Tsi6400-Quick-Start-Guide philips-tsi6400-quick-start-guide
Hızlı başlangıç kılavuzu sbcru1000_00_qsg_aen SBCRU1000/00 | Philips
PDA to the manual e534b885-9914-41a5-a80b-3b6fb2bdfeba
2014-12-13
: Philips Philips-Tsi640099-Quick-Start-Guide philips-tsi640099-quick-start-guide philips pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
iPronto QSG E v1_6.qxd 20-04-2004 14:07 Pagina 1 More Information Getting Started Guide You can find more information on getting the iPronto up and running and using it: • In the iPronto User Manual that accompanies the iPronto. Touchstrip Use the buttons on this touchstrip to access a layout. By tapping button 8 on the touchstrip you enter the iPronto Portal. View Control button With the View Control button you enter the Application Settings. Speaker Power Button 3104 205 3288.2 • In iPronto Online Help that you can access via the ‘User Manual’ link in the iPronto Portal in layout 8. Status Display Remote Control buttons • At http://www.pronto.philips.com. Install the Wireless LAN Adapter 1 Open the Wireless LAN Adapter cover by pushing in the grips and sliding off the cover in the indicated direction. 2 Insert the Wireless LAN Adapter in the socket. 3 Scroll Wheel By pressing and holding this scroll wheel for 5 seconds you enter the System Settings. Put the Wireless LAN Adapter in the correct position until it clicks and close the cover. Install the Battery Recharge the Battery 1 Lift the stand. 2 Open the battery cover by pushing the grips and sliding off the cover in the indicated direction. 4 Put the right side of the battery under the provided hook. 5 Push the left side of the battery down into its place. Close the battery cover. 3 Attach the battery connector to the provided socket. Note It is best to fully recharge the battery. The iPronto can be used when it is recharging. iPronto QSG E v1_6.qxd 20-04-2004 14:07 Pagina 2 Set the General Settings Note The first time you activate your iPronto, the System Settings will automatically appear. Set the Wireless Settings Set the Network Settings 1 8 9 10 Tap this button and follow the instructions on the screen. Check whether the Service Set Identifier (SSID) corresponds to the SSID of your Wireless Access Point (WAP). When calibration has succeeded, you hear a success sound. By default, the iPronto displays the SSID of the nearest WAP it can detect. Select one of these Network Configuration options. Check whether your home network or your Internet Service Provider uses a proxy. If needed, change the default name of the SSID in this box. 2 Select your timezone from this dropdown list. If encryption is enabled in your wireless network, select the correct encryption here. 5 3 4 Use the + and – buttons to adjust the brightness and power off settings. Select the desired Time format and Date format from these dropdown lists. To create a personal name for your iPronto, enter a name here. If you use a Proxy, enter your Proxy Port here. If your Proxy uses Password Authentication, select this option. 6 Select the box that you want to modify. The text box is highlighted. Use the + and – buttons to adjust the time and the date. 7 Switch the System sounds on or off. System sounds are the sounds that you hear when you tap a button on the touch screen, go to the System Settings, and so on. Select one of these three options to adjust the power on settings. If encryption is enabled in your wireless network, enter your Encryption pass phrase here. The Encryption pass phrase must be the identical to your WAP’s Encryption pass phrase. If your Proxy uses Password Authentication, enter your Username and Password here. When you have selected DHCP, these text boxes are automatically filled in. When you have selected Fixed IP, you have to fill these text boxes in manually. The Encoding key text box is automatically filled in. iPronto is now ready for use Use the buttons on this touchstrip to access a layout. This is the layout that contains the EPG application. Here you can check the signal strength of your iPronto. The status tab gives you an overview of all the system settings. When you tap and hold this View Control button, the EPG flipside appears.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:04:23 07:35:19Z Modify Date : 2004:04:23 09:37:30+02:00 Page Count : 2 Creation Date : 2004:04:23 07:35:19Z Mod Date : 2004:04:23 09:37:30+02:00 Producer : Acrobat Distiller 5.0.2 (Macintosh) Author : Kris Van de Vijver Metadata Date : 2004:04:23 09:37:30+02:00 Creator : Kris Van de Vijver Title : iPronto QSG E v1_6.qxdEXIF Metadata provided by EXIF.tools