Phonic Ear DETECTDOOR Wireless Doorbell User Manual Detect Door User Guide GB

Download:
Mirror Download [FCC.gov]
Document ID	523665
Application ID	iS8GH2KohCQc1PL9lcfh1w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.1kB (388785 bits)
Date Submitted	2005-03-15 00:00:00
Date Available	2005-03-15 00:00:00
Creation Date	2005-01-12 14:17:26
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-03-04 16:36:46
Document Title	Detect Door User Guide GB.qxd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	str_mmm

wireless doorbell
Your local representative:
international: +45 3917 7101
u.s.: 800.227.0735, then press 7 • canada: 800.263.8700
website: www.phonicear.dk
© 2004 Phonic Ear A/S
921-03-010-00/Rev. A 0105
GB user guide
o t h e r r e s o u r c e s o n l i n e a t w w w. p h o n i c e a r. d k
table of contents
DETECT DOOR function . . . . . . . . . . . . . . . . . . . . . . . . . . 1
DETECT DOOR features . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
DETECT DOOR instructions. . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Test and approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DETECT DOOR function
To activate the unit
When a visitor pushes the DETECT DOOR button, a wireless
alarm signal is sent to the PUZZLE system's receiver. DETECT
DOOR works with the following receivers in the PUZZLE system:
CALL, FLASH, WAKE, POCKETVIB, LOOP, BEAM, and LINK.
push button
battery
compartment
alarm selector
To select alarm pattern
fail indicator
Indicates if the wire to
the existing doorbell is
not correctly installed
status light
To indicate that unit is
transmitting
English
DETECT DOOR is one of the PUZZLE system’s alerting transmitters.
It functions as a wireless doorbell that connects to the existing
doorbell installation and replaces the standard push button
outside the door.
DETECT DOOR features
channel selector
To select personal code
battery
Lithium type ½ AA,
3.6V
mounting holes
input connector
To interface to existing
doorbell installation
DETECT DOOR features
DETECT DOOR features
front
11 disassembly nub
12 gasket
To keep it water
resistant
13 screwdriver
English
10 wire hole
For wire to existing
doorbell installation
13
DETECT DOOR features
DETECT DOOR features
English
front from the inside
back from the inside
10
12
11
DETECT DOOR instructions
1a preparation
1b preparation
Disassemble your DETECT
DOOR by lifting the bottom end of the front part
while pushing the
release nub with the
screwdriver.
English
DETECT DOOR instructions
Screw the back of
DETECT DOOR into
desired position using
the two mounting
holes.
If DETECT DOOR connects
to an existing doorbell
installation remove existing doorbell plate. Then
push out the material in
the wire hole of DETECT
DOOR using the screwdriver. Run the wires
through the hole. Otherwise leave the material in
the wire hole in place.
DETECT DOOR instructions
3a select alarm pattern
Install the battery
into the battery
compartment,
being sure to orient
the battery according to the symbols.
Pattern
Pin 6
Pin 7
on
on
off
off
on
off
on
off
on
off
Alarm patterns that
DETECT DOOR sends
to the PUZZLE system's receivers are
selected with pin 6
and 7 (see table).
Setting a distinctive
pattern for your
DETECT DOOR will
help you distinguish
the arrival of a visitor from other alerts
you may have set up
PUZZLE transmitters
to detect.
10
English
2 install battery
DETECT DOOR instructions
DETECT DOOR instructions
3b select alarm pattern
4a select personal code
NOTE: Use the screwdriver included
with DETECT DOOR to change the
position of the pins.
on
off
If you select e.g. alarm
pattern 2 for the
DETECT DOOR at the
front door then you
should select alarm
pattern 3 for the
DETECT DOOR at the
back door, and so on.
As each DETECT DOOR
has its own alarm pattern you can become
familiar with the different patterns.
NOTE: Patterns 1, 4,
and 5 are available
with other PUZZLE
transmitters.
11
on
off
Personal code is
selected by the pins
1, 2, 3, 4 according
to the table on page
13.
NOTE: The PUZZLE
system's different
receivers should be set
to the same personal
code.
NOTE: Use the
screwdriver included
with DETECT DOOR
to change the position
of the pins.
12
English
DETECT DOOR instructions
DETECT DOOR instructions
4b select personal code
5a connect existing doorbell
13
Code
Pin 1
Pin 2
Pin 3
Pin 4
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
Off
Off
On
On
On
On
Off
Off
Off
Off
On
On
On
On
Off
Off
Off
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
On
Cut the wire from
the existing doorbell
installation to
approximately 5cm
length and remove
3mm of insulation
from each of the
two wires. Insert
one of the two wires
into one of the
input connector
holes. Firmly tighten the screw to
secure the wire.
14
English
DETECT DOOR instructions
DETECT DOOR instructions
15
6 complete installation
Insert the other wire
into the other input
connector hole and
tighten the screw to
secure this wire. If the
fail indicator lights
up reverse the connection.
Click the front of
DETECT DOOR firmly
into place on the back
plate starting with the
upper end.
NOTE: Extra wire can
be fitted into the compartment if necessary.
NOTE: Ensure that the
gasket is fully in place
before assembly.
16
English
5b connect existing doorbell
DETECT DOOR instructions
DETECT DOOR instructions
Depress the area of
the push button.
The DETECT DOOR
transmits the signal
to any PUZZLE
receiver while the
status light lights
up.
NOTE: If DETECT
DOOR is connected to
an existing doorbell
installation pushing
the push button
enables the existing
doorbell while the
button is activated.
The status light does not light up when pushing the
activation button
• Check that the battery is installed correctly. See 2 .
• Replace the battery. See 2 .
NOTE: The status light lights up only for a short period of time
following each activation.
The status light does light up, but only some or none of
the PUZZLE system's receivers emit an alarm
• Check that DETECT DOOR and the PUZZLE system's receivers
are using the same personal code. See 4a and 4b .
If the PUZZLE system emits alarm without apparent
reason
• Change the personal code of the entire system to another
18
English
Should your DETECT DOOR wireless doorbell not function satisfactorily, please check the list below:
7 complete installation
17
troubleshooting
troubleshooting
If you still have trouble after trying the ideas above please
contact your local authorized Phonic Ear representative/
installer.
test and approval
DETECT DOOR is approved and CE marked in accordance with
the R&TTE directive. Hereby, Phonic Ear, declares that this
DETECT DOOR doorbell is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
19
Waste from electronic
equipment must be
handled according to
local regulations.
English
setting, because the faulty alarms may relate to interference
from neighbouring PUZZLE system installations. See 4a
and 4b .
safety precautions
Warning
Lithium battery inside. Fire, explosion and severe burn hazard if the battery is incorrectly replaced. Do not recharge,
disassemble, heat above 100°C/212°F, incinerate, or expose
to water or direct sunlight.
To avoid damaging electronic circuitry, which may impair
safety features do not dissemble, modify, or put pressure on
this product.
Important note
Lithium batteries should not be opened or burned.
Exposure to the ingredients contained within or combusted
products may be harmful.
Notice:
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operations is subject to the
following two conditions: (1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that
may cause undesire operation.
20
warranty (cont’d)
A one-year limited warranty is issued to the original consumer of this product(s) by
Phonic Ear (two years inside the EU).
5 Consequential damages and damages resulting from delay or loss of this instrument. The exclusive remedy under this warranty is strictly limited to repair or
replacement as herein provided.
6 Products damaged in transit unless investigated by the shipper and returned to the
warrantor with the investigation report.
time period of warranty
This warranty will go into effect upon the date of original purchase of this equipment, and
will remain in effect for one calendar year (two years inside the EU) from that date as long
as the instrument remains the property of the original consumer.
what is covered by this warranty
Any electronic component which, because of workmanship, manufacturing, or design
defects, fails to function properly under normal use during the life of this warranty
will be replaced or repaired at no charge for parts or labor when returned to the factory
service center. Transportation in is paid by the customer. If it is determined that repair
is not feasible, the entire unit may be replaced with an equivalent unit upon mutual
agreement of the manufacturer and customer.
what is not covered by this warranty
1 Malfunctions resulting from abuse, neglect, or accident.
2 Peripheral accessories as itemized within the product brochure, when such items are
returned after 90 days from the original purchase.
3 Alkaline batteries (if applicable).
4 Instruments connected, installed, used, or adjusted in a manner contrary to instructions provided by the manufacturer.
21
Phonic Ear reserves the right to make changes in the design or construction of any of
its instruments at any time without incurring any obligation to make any changes
whatsoever on units previously purchased. This warranty is in lieu of all other
expressed warranties. All expressed and implied warranties will terminate upon the
expiration of this written warranty. No representative or person is authorized to represent or assume for us any liability in connection with the sale or use of our products
other than as set forth above.
The above warranty does not affect any legal rights that you might have under applicable national legislation governing sale of consumer goods. Your distributor may have
issued a warranty that goes beyond the clauses of this limited warranty. Please consult
your distributor for further information.
what to do if you need service
If you require service under the terms of this warranty, carefully package the instrument to prevent damage and return it to your distributor (see information on back
cover). Please provide your receipt, a detailed description of the problem, your full name,
billing address, and telephone number.
22
English
warranty

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:01:12 14:17:26Z
Modify Date                     : 2005:03:04 16:36:46+08:00
Page Count                      : 14
Creation Date                   : 2005:01:12 14:17:26Z
Mod Date                        : 2005:03:04 16:36:46+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : str_mmm
Metadata Date                   : 2005:03:04 16:36:46+08:00
Creator                         : str_mmm
Title                           : Detect Door User Guide GB.qxd
Page Mode                       : UseThumbs
Page Layout                     : SinglePage
Has XFA                         : No

EXIF Metadata provided by EXIF.tools