Photic Technology FDK-WC-002 Wireless charger User Manual 15 FDK WC 002 UserMan

Shenzhen Photic Technology Co., Ltd Wireless charger 15 FDK WC 002 UserMan

15_FDK-WC-002 UserMan

Shenzhen Photic Technology Co., Ltdwww.photic-hd.comUser ManualWireless chargerThank you for choosing Photic products. Please read this manual before using thedevice to ensure safe andproperuse.
Shenzhen Photic Technology Co., Ltdwww.photic-hd.com1Product Introduction10W wireless charger with elegant shap of design makes it very slim and unique.Meanwhile, silicon gel inbuilt to hold your phone firmly. This intelligent product willbring you with limitless life experience as well as safe and free experience withwireless charging function.Standard Accessories:Wireless chargerUSB cableUser manualProduct layout:Product Specification:Product Instructions:Wireless charger supports fast wireless charging.When using the 5V adaptor, the wireless charger supports the 5W load. When using9V adaptor, the wireless charger supports the 10W fast charging.Using wireless charging:1. Insert one end of USB charging cable into power adaptor or computer. Shown asPower10W MaxModel numberFDK-WC-002InputUSB 5V/2A, or 9V/1.67AOutput5W/7.5W/10WConversion rate80%LED indicator lightCharging portWireless charging surfaceNon-slip silicone gel
Shenzhen Photic Technology Co., Ltdwww.photic-hd.com2below.Input via Adaptor input via computer2. Insert an other of USB charging cable into Micro USB port of the wireless charger.The LED indicator lights up in Green to indicate well connectivity. Then turned off instand by.3. Place your phone on the wireless charger. Make sure that the phone is welllocated at the charging area of wireless charger. When the phone is being charged,the LED indicator will light up in Green to show it is charging.Checking the charging status:You can check the devices charging status via the notification light.Details as below:1) When connecting to the power outlet: indicator light is Green and turns off after3s.2) When the mobilephone has been fully charged the light will turned off.3) When not charging properly due to a general error: the Green Indicator light willflash. Such as FOD, over Voltage input or High temperature.Note:*All devices must have wireless charging function or inbuilt wireless chargingreceiver.* If the indicator light is not working properly, reconnect the adaptor to the wirelesscharger.* There is a charging interference if any metallic things between the wireless charger
Shenzhen Photic Technology Co., Ltdwww.photic-hd.com3and mobile devices.* Please keep the charger away from water or other liquid.* If you need to clean the charger, please make sure it is not power supply.FCC warning:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Any changes or modifications not expressly approved by the party responsible forcompliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated with aminimum distance of 20 cm between the radiator and your body

Navigation menu