Physik Instrumente N 216 Datasheet

N-216_Datasheet N-216 NEXLINE® Linear Actuator

User Manual: Physik Instrumente N-216 NEXLINE® Linear Actuator

Open the PDF directly: View PDF PDF.
Page Count: 3

03.11.2017
High-Force PiezoWalk® Drive for Long-Range Nanopositioning
Specifications
N-216.101 / N-216.1A1 N-216.201 / N-216.2A1 Tolerance
Active axes
X
X
Motion and positioning
Travel range
20 mm
20 mm
Travel range in analog mode
±3 µm
±3 µm
Integrated sensor
N-216.101: none
N-216.1A1: linear encoder
N-216.201: none
N-216.2A1: linear encoder
Open-loop resolution 0.03 nm 0.03 nm typ.
Closed-loop resolution
- / 5 nm (N-216.1A1)
- / 5 nm (N-216.2A1)
Velocity (10 % duty cycle, full step mode)* 1.0 mm/s 1.0 mm/s max.
Velocity (100 % duty cycle, full step mode)* 0.6 mm/s 0.6 mm/s max.
Velocity (100 % duty cycle, nanostepping mode)** 0.4 mm/s 0.4 mm/s max.
Mechanical properties
Drive force (active)***
300 N
600 N
max.
Holding force (passive)
400 N
800 N
min.
Drive properties
Motor type NEXLINE® NEXLINE®
Operating voltage -250 V to +250 V -250 V to +250 V
Miscellaneous
Operating temperature range 0 to 55 °C 0 to 55 °C
Material Aluminum, stainless steel Aluminum, stainless steel
Mass
1150 g
1250 g
N-216
NEXLINE® Linear Actuator
Force generation up to 600 N
Holding force up to 800 N
Travel range 20 mm
Integrated linear encoder with resolution
5 nm
03.11.2017
N-216.101 / N-216.1A1 N-216.201 / N-216.2A1 Tolerance
Cable length
2.0 m
2.0 m
Connector Sub-D 25 (m) Sub-D 25 (m)
Recommended electronics E-712.1AM E-712.1AM
* Depending on drive electronics. Data refer to operation together with E-712 controller.
** Depending on drive electronics. Data refer to operation together with E-712 controller. The maximum velocity in nanostepping mode is designed for the
best possible constancy so that no velocity variations occur when executing the steps.
*** Data refer to full step mode operation.
All specifications based on room temperature (22 °C ±3 °C).
Ask about custom designs!
Drawings and Images
N-216, dimensions in mm. Mounting flanges for side or front mounting are included in the delivery.
03.11.2017
Motion mode comparison of a NEXLINE® actuator: The nanostepping mode provides a very smooth motion. Full step mode
allows higher speed.
Ordering Information
N-216.101
NEXLINE® piezo-walking high-load actuator , 20 mm, 300 N, open loop
N-216.1A1
NEXLINE® piezo-walking high-load actuator, 20 mm, 300 N, linear encoder, 5 nm resolution
N-216.201
NEXLINE® piezo-walking high-load actuator , 20 mm, 600 N, open loop
N-216.2A1
NEXLINE® piezo-walking high-load actuator, 20 mm, 600 N, linear encoder, 5 nm resolution
Ask about custom designs!

Navigation menu