Pinnacle Communications EIPRTR Wireless Bridge/Router User Manual 51327

Pinnacle Communications Inc Wireless Bridge/Router 51327

Contents

8

Download: Pinnacle Communications EIPRTR Wireless Bridge/Router User Manual 51327
Mirror Download [FCC.gov]Pinnacle Communications EIPRTR Wireless Bridge/Router User Manual 51327
Document ID51327
Application IDp0gNKcCJhys22OFInuINSA==
Document Description8
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.47kB (68381 bits)
Date Submitted1999-08-02 00:00:00
Date Available1998-08-28 00:00:00
Creation Date2001-05-25 17:17:24
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-05-25 17:17:33
Document Title51327.pdf
Document Author: jsoscia

FCC ID: NSU EIPRTR
Antenna Installation
25 ANTENNA / INTEGRATED
INSTALLATION
(2) Reflector halves
(1) Feed assembly
(1) Sub-reflector
(1) Mounting "L" shaped bracket
(4) Keps nuts
(4) 113-32 Machine screws
(2) Stainless U-bolt
(2) Mast clamps
(1) as x 1/2" stainless screw
(8) Stainless nuts
(8) Stainless lock washers
(4) Stainless carriage bolts
ASSEMBLY
Note: Loosely tighten all
hardware till completely
assembled and then tighten
securely. ‘
1 Assemble the two halves
Inserting the 4 118-32
machine screws (A) through
the front. Secure with the
keps nuts on the back
(figure 1)
"L" 4/ 2 Place the sub-reflector on
, ' the front of theleed and
secure with the #6 x 1/2"
stainless screw. (figure 1)
Delermine the polarity of the
anlenna, (figure 4 8. 5)
“i.
"L" Bracket
Mount
Feed Parallel
To Antenna Grid
Figure 4
Feed Parallel
To Antenna Grin
Figure 5
Note:
Note:
Horizontal Polarity.
Refer to figure 2 and «Her
proper "L" bracket and feed
alignment on backside of
antenna. '
Vertical Polarity.
Refer to figure 3 and 5 for
proper "L" bracket and feed
alignment on backside of
antenna.
Place the ‘L' bracket on the
back of the antenna. Insert
two carriage bolts from the
front to attach. Secure
on the back with the IOCk
washers and nuts.
Check the dipole feed
assembly for the proper
polarity.
The dipole feed should be
parallel to the antenna grid
when in position for horizontal
or vertical polarity.
Pull the coax through the
antenna and the ‘L' bracket
opening. Secure the feed on
the front with two carriage
bolls (D) (figure 1). Secure
the feed on the back with the
lock washers and nuts.
(figure 1)
Place the 2 mast clamps on
the 2 U-Bolts (figure 2).
Fasten the U-bolts on the 'L'
bracket W|lh the 4 lock
washers and nuts.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:25 17:17:24
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 51327.pdf
Modify Date                     : 2001:05:25 17:17:33-04:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NSUEIPRTR

Navigation menu