Pioneer K027 DVD AV Receiver User Manual

Pioneer Corporation DVD AV Receiver

User Manual

Operation ManualDVD AV RECEIVERAVH-P5200DVDAVH-P5200BTEnglish<CRB3314-A/N>1
Thank you for purchasing this PIONEER product.To ensure proper use, please read through this manual before using this product. Itis especially important that you read and observe WARNINGs and CAUTIONsinthis manual. Please keep the manual in a safe and accessible place for future refer-ence.Be sure to read this!DVD video disc region numbers 8!Handling guideline 82PrecautionsIMPORTANT SAFEGUARDS 5To ensure safe driving 5To avoid battery exhaustion 6Before You StartInformation to User 7For Canadian model 7About this unit 7Operating environment 8After-sales service for Pioneer products 8Visit our website 8Protecting your unit from theft 8Resetting the microprocessor 9Feature demo mode 9Adjusting the response positions of thetouch panels (Touch Panel Calibration) 9What’s whatHead unit 10Optional remote control 10Basic OperationsBasic Operations 11Operating the scroll bar and the scrubberbar 12Activating the touch panel keys 13Common operations for menu settings/lists 13Opening and closing the LCD panel 13Ejecting a disc 14Ejecting an SD 15Setting the clock 15TunerIntroduction of tuner operations 16Playing moving imagesIntroduction of video playbackoperations 17Playing audioIntroduction of sound playbackoperations 20Playing still imagesIntroduction of still image playbackoperations 23Introduction of still image playback as aslideshow operations 24Bluetooth TelephoneIntroduction of Bluetooth telephoneoperations 25XM/SIRIUS tunerIntroduction of XM/SIRIUS tuneroperations 27HD RadioätunerIntroduction of HD Radioätuneroperations 29Using Bluetooth wireless technologyIntroduction of Bluetooth telephoneoperations 30Bluetooth audio operations 31Detailed instructionsStoring and recalling stations 33Storing the strongest stations 33Tuning in to strong signals 33Tuning in to strong HD Radio signals 33Using iTunes tagging 34Switching the media file type 34Operating the DVD menu 35<CRB3314-A/N>2ContentsEn2
Operating this unit’s iPod function from youriPod 35Random play (shuffle) 35Playing all songs in random order (shuffleall) 36Repeating playback 36Playing videos from your iPod 36Browsing for a video/music on the iPod 36Resume playback (Bookmark) 37Frame-by-frame playback 37Slow motion playback 37Searching for the part you want to play 38Changing audio language during playback(Multi-audio) 38Changing the subtitle language duringplayback (Multi-subtitle) 38Changing the viewing angle during playback(Multi-angle) 39Return to the specified scene 39Selecting audio output 39PBC playback 39Selecting tracks from the track title list 39Selecting files from the file name list 40Using advanced sound retriever 40Changing audiobook speed 40Displaying lists related to the currentlyplaying song (Link Search) 40Playing DivXÒVOD content 40Capture an image in JPEG files 41Changing the wide screen mode 41Switching the XM/SIRIUS channel selectionmode 42Selecting an XM/SIRIUS channel directly 43Using the MyMix function 43Using the Game Alert function 45Displaying the Radio ID 46Switching the SIRIUS display 46Using the Instant Replay function 46Switching the seek mode 47Switching the reception mode 47Calling a number in the phone book 47Selecting a number by alphabet searchmode 47Using the missed, received and dialed calllists 48Using the missed, received and dialed calllists 48Setting automatic answering 49Adjusting the other party’s listeningvolume 49Switching the ring tone 49Using the preset dial lists 49Making a call by entering phone number 49Setting the private mode 50Pairing from this unit 50Using a Bluetooth device to pair 51Connecting to a Bluetooth deviceautomatically 51Switching visible unit 51Displaying BD (Bluetooth Device)address 52Entering PIN code for Bluetooth wirelessconnection 52Using a cellular phone to initiate aconnection 52Registering a connected cellular phone 52Voice recognition 53Connecting a Bluetooth audio player 53Connecting to a Bluetooth deviceautomatically 53Displaying BD (Bluetooth Device)address 53Menu operationsIntroduction of menu operations 54Audio Adjustments 55Setting up the DVD player 58System settings 62Entertainment settings 67<CRB3314-A/N>3En 3Contents
Customizing menus 68Other FunctionsChanging the picture adjustment 69Setting rear monitor output 69Adjusting the response positions of thetouch panels (Touch PanelCalibration) 70Using an AUX source 70Using an external unit 71Additional InformationTroubleshooting 72Error messages 74Understanding auto EQ error messages 77Understanding messages 78Indicator list 80Handling guideline 82Compressed audio compatibility (disc, USB,SD) 84iPod compatibility 85Sequence of audio files 86Using the display correctly 86Copyright and trademark 87Language code chart for DVD 89Specifications 91<CRB3314-A/N>4ContentsEn4
IMPORTANT SAFEGUARDSPlease read all of these instructions regardingyour display and retain them for future refer-ence.1Read this manual fully and carefully be-fore operating your display.2Keep this manual handy as a reference foroperating procedures and safety informa-tion.3Pay close attention to all warnings in thismanual and follow the instructions care-fully.4Do not allow other persons to use this sys-tem until they have read and understoodthe operating instructions.5Do not install the display where it may (i)obstruct the driver’s vision, (ii) impair theperformance of any of the vehicle’s oper-ating systems or safety features, includ-ing air bags, hazard lamp buttons or (iii)impair the driver’s ability to safely oper-ate the vehicle.6Do not operate this display if doing so inany way will divert your attention fromthe safe operation of your vehicle. Alwaysobserve safe driving rules and follow allexisting traffic regulations. If you experi-ence difficulty in operating the system orreading the display, park your vehicle in asafe location and make necessary adjust-ments.7Please remember to wear your seat belt atall times while operating your vehicle. Ifyou are ever in an accident, your injuriescan be considerably more severe if yourseat belt is not properly buckled.8Never use headphones while driving.9To promote safety, certain functions aredisabled unless the parking brake is on,and the vehicle is not in motion.10 Never set the volume of your display sohigh that you cannot hear outside trafficand emergency vehicles.WARNING!Do not attempt to install or service yourdisplay by yourself. Installation or servi-cing of the display by persons withouttraining and experience in electronicequipment and automotive accessoriesmay be dangerous and could expose youto the risk of electric shock or otherhazards.To ensure safe drivingWARNING!LIGHT GREEN LEAD AT POWER CON-NECTOR IS DESIGNED TO DETECTPARKED STATUS AND MUST BE CON-NECTED TO THE POWER SUPPLY SIDEOF THE PARKING BRAKE SWITCH. IM-PROPER CONNECTION OR USE OFTHIS LEAD MAY VIOLATE APPLICABLELAW AND MAY RESULT IN SERIOUS IN-JURY OR DAMAGE.!To avoid the risk of damage and injury and thepotential violation of applicable laws, this unitis not for use with a video screen that is visibleto the driver.!To avoid the risk of accident and the potentialviolation of applicable laws, no viewing offront seat video should ever occur while thevehicle is being driven.!In some countries or states the viewing ofimages on a display inside a vehicle even bypersons other than the driver may be illegal.Where such regulations apply, they must beobeyed and this unit’s DVD features shouldnot be used.When you attempt to watch a video imagewhile driving, the warning Viewing of frontseat video source while driving is strictlyprohibited. will appear on the front display.To watch a video image on the front display,park your vehicle in a safe place and apply theparking brake.<CRB3314-A/N>5En 5Section01PrecautionsPrecautions
Parking brake interlockCertain functions (Video viewing and certaintouch panel keys) offered by this unit could bedangerous and/or unlawful if used while driv-ing. To prevent such functions from beingused while the vehicle is in motion, there is aninterlock system that senses when the parkingbrake is set. If you attempt to use the functionsdescribed above while driving, they will be-come disabled until you stop the vehicle in asafe place, and (1) apply the parking brake, (2)release the parking brake, and then (3) applythe parking brake again. Please keep thebrake pedal pushed down before releasing theparking brake.When using a display connectedto REAR MONITOR OUTPUTThis unit’sREAR MONITOR OUTPUT is forconnection of a display to enable passengersin the rear seats to watch the DVD or VideoCD.WARNINGNEVER install the rear display in a locationwhere the driver can watch a DVD while driving.When using the rear view cameraWith an optional rear view camera, this unitcan be used as an aid to keep an eye on trai-lers, or when backing into a tight parking spot.WARNING!SCREEN IMAGE MAY APPEAR RE-VERSED.!USE INPUT ONLY FOR REVERSE ORMIRROR IMAGE REAR VIEW CAMERA.OTHER USE MAY RESULT IN INJURYOR DAMAGE.CAUTION!The rear view camera function is to be usedas an aid to keep an eye on trailers, or whilebacking up. Do not use for entertainment pur-poses.!Please note that the edges of the rear viewcamera images may differ slightly accordingto whether full screen images are displayedwhen backing up, and whether the images areused for checking the rear when the vehicle ismoving forward.To avoid battery exhaustionKeep the vehicle engine running when usingthis unit to avoid draining the battery power.!When no power is supplied to this unit,such as when the vehicle battery is beingreplaced, the microcomputer of this unit re-turns to its initial condition. We recom-mend that you transcribe the audioadjustment data.WARNINGDo not use with vehicles that do not feature anACC position.<CRB3314-A/N>6En6Section01 Precautions
FCC ID: AJDK027MODEL NO.: AVH-P5200BTIC: 775E-K027This equipment complies with FCC/IC radiationexposure limits set forth for uncontrolledequipment and meets the FCC/IC radio fre-quency (RF) Exposure Guidelines in Supple-ment C to OET65. This equipment has very lowlevels of RF energy that it deemed to complywithout maximum permissive exposure evalua-tion (MPE). But it is desirable that it should beinstalled and operated with at least 20 cm andmore between the radiator and person’s body(excluding extremities: hands, wrists, feet andankles).This transmitter must not be co-located or op-erated in conjunction with any other antennaor transmitter.This device complies with part 15 of the FCCRules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interfer-ence, and (2) this device must accept any inter-ference received, including interference thatmay cause undesired operation.Information to UserAlteration or modifications carried out withoutappropriate authorization may invalidate theuser’s right to operate the equipment.For Canadian modelThis Class B digital apparatus complies withCanadian ICES-003.About this unitThe tuner frequencies on this unit are allo-cated for use in North America. Use in otherareas may result in poor reception.WARNINGHandling the cord on this product or cords asso-ciated with accessories sold with the productmay expose you to chemicals listed on proposi-tion 65 known to the State of California and othergovernmental entities to cause cancer and birthdefect or other reproductive harm. Wash handsafter handling..CAUTION:USE OF CONTROL OR ADJUSTMENT ORPERFORMANCE OF PROCEDURESOTHER THAN THOSE SPECIFIED HEREINMAY RESULT IN HAZARDOUS RADIATIONEXPOSURE.CAUTION:THE USE OF OPTICAL INSTRUMENTSWITH THIS PRODUCT WILL INCREASEEYE HAZARD.CAUTION!Do not allow this unit to come into contactwith liquids. Electrical shock could result.Also, damage to this unit, smoke, and over-heating could result from contact with liquids.!Keep this manual handy for future reference.!Always keep the volume low enough to hearoutside sounds.!Avoid exposure to moisture.!If the battery is disconnected or discharged,any preset memory will be erased.Important (Serial number)The serial number is located on the bottom ofthis unit. For your own security and convenience,be sure to record this number on the enclosedwarranty card.<CRB3314-A/N>7En 7Section02Before You StartBefore You Start
DVD video disc region numbersOnly DVD video discs with compatible regionnumbers can be played on this player. You canfind the region number of the player on thebottom of this unit and in this manual (refer toSpecifications on page 91).Operating environmentThis unit should be used within the tempera-ture ranges shown below.Operating temperature range: -10 °C to +60 °C(14 °F to 140 °F)EN300328 ETC test temperature: -20 °C and+55 °C (-4 °F and 131 °F)After-sales service forPioneer productsPlease contact the dealer or distributor fromwhere you purchased this unit for after-salesservice (including warranty conditions) or anyother information. In case the necessary infor-mation is not available, please contact thecompanies listed below:Please do not ship your unit to the companiesat the addresses listed below for repair withoutadvance contact.U.S.A.Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404CANADAPioneer Electronics of Canada, Inc.CUSTOMER SATISFACTION DEPARTMENT300 Allstate ParkwayMarkham, Ontario L3R 0P21-877-283-5901905-479-4411For warranty information please see the Lim-ited Warranty sheet included with this unit.Visit our websiteVisit us at the following site:http://www.pioneerelectronics.com1 Register your product. We will keep the detailsof your purchase on file to help you refer tothis information in the event of an insuranceclaim such as loss or theft.2 Receive updates on the latest products andtechnologies.3 Download owner’s manuals, order productcatalogues, research new products, andmuch more.4 Your feedback is important in our continual ef-fort to design and build the most advanced,consumer-focused product in the industry.Serial numberProtecting your unit fromtheftThe front panel can be detached to deter theft.!If the front panel is not detached from thehead unit within four seconds of turning offthe ignition, a warning tone will sound.!You can turn off the warning tone. Refer toSwitching the warning tone on page 64.Important!Handle gently when removing or attachingthe front panel.!Avoid subjecting the front panel to excessiveshock.!Keep the front panel out of direct sunlight andhigh temperatures.!If removed, replace the front panel on the unitbefore starting up your vehicle.<CRB3314-A/N>8En8Section02 Before You Start
Removing the front panel%Pinch the top and bottom of its rightside and pull the front panel out.Take care not pinch it too tightly or to drop it,and also avoid contact with water or otherfluids to prevent permanent damage.Re-attaching the front panel1 Slide the front panel to the left.Front panel and the head unit are connectedon the left side. Make sure that the front panelhas been properly connected to the head unit.2 Press the right side of the front paneluntil it is firmly seated.#If you can’t attach the front panel to the headunit successfully, try again. However, forcing thefront panel into place may result in damage.Resetting the microprocessorBy pressing RESET, you can reset the micro-processor to its initial settings without chan-ging the bookmark information.The microprocessor must be reset in the fol-lowing situations:!Before using this unit for the first time afterinstallation!If the unit fails to operate properly!When strange or incorrect messages ap-pear on the display1 Turn the ignition switch OFF.2 Press RESET with a pen tip or otherpointed instrument.For this function, verify the following sectionbefore operation. Refer to this page.RESET buttonNoteSwitch your engine ON or set the ignition switchto ACC ON before pressing RESET in the follow-ing situations:!After completing connections!When erasing all stored settings!When resetting the unit to its initial (factory)settingsFeature demo modeThe feature demo automatically starts whenyou select Off for the source and continueswhile the ignition switch is set to ACC or ON.To cancel the feature demo, press and holdMUTE/. Press and hold MUTE/ again torestart. Operating the feature demo while thecar engine is turned off it may drain the bat-tery power.ImportantFailure to connect the red lead (ACC) of this unitto a terminal coupled with ignition switch on/offoperations may lead to battery drain.Adjusting the responsepositions of the touch panels(Touch Panel Calibration)If you feel that the touch panel keys on thescreen deviate from the actual positions thatrespond to your touch, adjust the response po-sitions of the touch panel. Refer to Adjustingthe response positions of the touch panels(Touch Panel Calibration) on page 70.<CRB3314-A/N>9En 9Section02Before You StartBefore You Start
Head unitPart Part1MUTE/( : AVH-P5200BTonly)8OPEN/CLOSE2MENUDisplaying themenu.Returning to thenormal display.9AUX input jack (3.5mm stereo/videojack)Use to connect anauxiliary device.3MODETurning the infor-mation display off.aAuto EQ micro-phone input jackUse to connect anauto EQ micro-phone.4Disc loading slot bUSB portWhen connecting,open the USB con-nector lid.5SRC/OFF cRESET6c/d(TRACK)dSD memory cardslot7h(eject)CAUTION!Use an optional Pioneer USB cable (CD-U50E)to connect the USB audio player/USB mem-ory as any device connected directly to theunit will protrude out from the unit and maybe dangerous.!Do not use unauthorized products.!For details on how to operate a navigation unitfrom this unit, refer to its operation manual.NoteWhen the navigation unit is connected, pressMODE to switch to the navigation display. PressMODE and hold to turn the display off.Press MODE again to turn the display on.Optional remote controlThe remote control CD-R55 is sold separately.For details concerning operations, see the re-mote control manual.<CRB3314-A/N>10En10Section03 What’s what
Basic OperationsWed 28 may12:45PM111222RadioDisciPodSDAUXSDRear ViewRear Front3 54 61Touch panel keys1Displaying the source menu.2Wed 28 may12:45 PMSwitching to clock adjust-ment display.Refer to Setting the clock onpage 15.3RadioSource iconSelecting a favorite source.When the source icon is notdisplayed, it can be displayedby touching the screen.4Rear FrontSwitching the output sourcefor the rear monitor.Refer to Setting rear monitoroutput on page 69.5Rear View Switching the rear viewimage on or off.6Turning the unit off.Turning the unit on using the buttons1Press SRC/OFF to turn the unit on.Turning the unit off using the buttons1Press SRC/OFF and hold until the unit turns off.Selecting a source using the buttons1Press SRC/OFF to cycle through the sourceslisted below:Selecting a source using the touch panel keys1Touch the source icon and then touch the desiredsource name.!XM –XM tuner!Sirius –SIRIUS tuner!HD Radio –Digital Radio tuner!Radio –Radio!AV –AV input!Disc –Built-in DVD player!USB/iPod –USB/iPod!SD –SD memory card!EXT1 –External unit 1!EXT2 –External unit 2!AUX –AUX!TEL –Bluetooth telephone/audio(Function of AVH-P5200DVD)!When the source icon is not displayed, it can bedisplayed by touching the screen.!While operating the menu, you cannot select asource by touching the source icon.Adjusting the volume1Rotate MUTE/to increase or decrease the vo-lume.Notes!In this manual, iPod and iPhone will be re-ferred to as “iPod”.!The USB/iPod icon will change as follows:—USB is displayed when a USB storage de-vice is connected.—iPod is displayed when an iPod is con-nected.—USB/iPod is displayed when no device isconnected.!When appropriately set up, the image fromthe rear view camera can be displayed auto-matically. For details, refer to Setting the rearview camera (back up camera) on page 65.<CRB3314-A/N>11En 11Section04Basic OperationsBasic Operations
!An external unit refers to a Pioneer product,such as those which will be available in the fu-ture. Although incompatible as a source, thebasic functions of up to two external units canbe controlled with this unit. When two exter-nal units are connected, the external units areautomatically allocated to external unit 1 orexternal unit 2.Operating the scroll barand the scrubber barAudioFader/Balance F/R 0 L/R 0Super BassOnGraphic EQAuto EQOffL/R:0Sonic Center ControlLoudnessSubwoofer111111222AbcdeabcdeabcdeabcdeabWed 28 may12:45 PM01 0181201:45-02:4501 L+R2221Scroll iconAppears when selectable items are hidden.2Scrubber barAppears when the playback point can be spe-cified or set by dragging.Viewing the hidden items1Touch the scroll icon or drag the scrubber bar toview any hidden items.Specifying the playback point1Drag the scrubber bar on the screen.(Not available when the scrubber bar is grayedout.)<CRB3314-A/N>12En12Section04 Basic Operations
Activating the touch panelkeysAbcdeabcdeabcdeabcdeabWed 28 may12:45PM010181201:45-02:4501L+R1111112Return22:45445331Touch panel keysPerform various operations by touching thepanel.2Open/close keysControl the touch panel key area by touchingthese keys.1Turning the display to simpli-fied display.Returning to the normal dis-play by touching the screenwhen playing movingimages.Returning to the normal dis-play by touching same iconwhen playing audio.2Viewing the hidden touchpanel keys.3Shorten the touch panelarea.Common operations formenu settings/lists(AVH-P5200BT only)Starting the Bluetooth telephonemenu.Refer to Introduction of Bluetooth tel-ephone operations on page 25.Displaying the list menu.Starting the search function.Displaying the menu.Refer to Introduction of menu opera-tions on page 54.Displaying still images as a slideshow when listening to anothersource.Viewing slide showsRefer to Introduction of still imageplayback operations on page 23.Returning to the previous displayReturning to the previous list/cate-gory (the folder/category one levelhigher)!Press and hold MENU to displayPicture Adjustment.Refer to Changing the picture adjustmenton page 69.Opening and closing theLCD panelThe LCD panel will open or close automaticallywhen the ignition switch is turned on or off.You can turn off the automatic close/openfunction. (Refer to page 9.)!Do not close the LCD panel by force withyour hands. That will cause a malfunction.!The automatic close/open function will op-erate the display as follows.—When the ignition switch is turned OFFwhile the LCD panel is opened, the LCDpanel will close after six seconds.—When the ignition switch is turned ONagain (or turned to ACC), the LCD panelwill open automatically.<CRB3314-A/N>13En 13Section04Basic OperationsBasic Operations
—Removing or attaching the front panelwill automatically close or open the LCDpanel. (Refer to page 64.)!When the ignition switch is turned OFFafter the LCD panel has been closed, turn-ing the ignition switch ON again (or turningit to ACC) will not open the LCD panel. Inthis case, press OPEN/CLOSE to open theLCD panel.!When closing the LCD panel, check tomake sure that it has closed completely. Ifthe LCD panel has stopped halfway, leavingit like this could result in damage.CAUTIONKeep hands and fingers clear of the unit whenopening, closing, or adjusting the LCD panel. Beespecially cautious of children’s hands and fin-gers.%Press OPEN/CLOSE to open the LCDpanel.#To close the LCD panel, press OPEN/CLOSEagain.Adjusting the LCD panel angleImportant!If you can hear the LCD panel knockingagainst your vehicle’s console or dashboard,touch the TILT keys to move the LCD panel alittle forward.!When adjusting the LCD panel angle, be sureto touch the TILT keys. Forcibly adjusting theLCD panel by hand may damage it.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch TILT.3 Touch the TILT keys to adjust the LCDpanel to an easily viewable angle.The LCD panel angle continues changing aslong as you touch and hold the TILT keys.Laying the panel down.Returning the panel to the uprightposition.#As the set angle is saved, the LCD panel willautomatically be adjusted to the same positionthe next time the LCD panel is opened.Turning the LCD panel horizontallyWhen the LCD panel is upright and hindersthe operation of the air conditioner, the panelcan be turned horizontally temporarily.%Press and hold OPEN/CLOSE to turn theLCD panel horizontally.#To return to the original position, press andhold OPEN/CLOSE again.#The LCD panel returns to the original positionautomatically, indicated with a beeping sound 10seconds after operation.Ejecting a disc1 Press h(eject).2 Eject a disc<CRB3314-A/N>14En14Section04 Basic Operations
Ejecting an SD1 Removing the front panelRefer to Removing the front panel on page 9.2 Push an SD.3 Ejecting an SDSetting the clock1 Switch to Clock Adjustment display.Refer to Basic Operations on page 11.2 Select the item to set.3 Touch aor bto set the correct dateand time.<CRB3314-A/N>15En 15Section04Basic OperationsBasic Operations
Introduction of tuneroperationsWed 28 may12:45 PMP.ch PP2MHzBand:FM1AbcdeabcdeabcdeAbcdeabcdeabcdeLocalRadio87.587.5 MHzAbcdeabcdeabcde6111233344451Touch panel keys1Turning local seek tuning onand off.Refer to Tuning in to strongsignals on page 33.2Switching the equalizercurves.Refer to Using the equalizeron page 55.Touch and hold for morethan two seconds to turn theauto-equalizer on or off.Refer to Using the auto-equalizer on page 56.3Displaying the preset chan-nel list.Refer to Storing and recallingstations on page 33.Refer to Storing the strongeststations on page 33.Refer to Storing and recallingstations on page 33.4Band: Selecting a band (FM1, FM2,FM3 for FM or AM).5Recalling radio station fre-quencies assigned to presettuning keys.Refer to Storing and recallingstations on page 33.6TAGSaving song information(tag) from the broadcastingstation to your iPod.Refer to Using iTunes taggingon page 34.Manual tuning (step by step) using the buttons1Press cor d(TRACK).Seek tuning using the buttons1Press and hold cor d(TRACK).NoteListening AM radio while an iPod is charged fromthis unit may generate noise. In this case, discon-nect the iPod from this unit.<CRB3314-A/N>16En16Section05 Tuner
Introduction of videoplayback operationsYou can view DVD/DVD-R/DVD-RW/CD/CD-R/CD-RW/USB/SD/iPod.ReturnAbcdeabcdeabcdeabcdeabWed 28 may12:45 PM01 018 1201:45 -02:4501 L+RDVD videoReturnVideo CDAbcdeabcdeabcdeabcdeabWed 28 may12:45 PM01:45ALLSongsgS.Rtrv-02:45AbcdeabcdeabcdeabcdeabAbcdeabcdeabcdeabcdeab2067/12345iPodiPod video01:45 -02:45When playing a disc containing a mixtureof various media file types!If an iPod with video capabilities is con-nected to this unit using an interface cablesuch as the CD-IU50V (sold separately), youcan enjoy the video contents of the iPod asan iPod source.1Touch panel keys1Selecting the repeat range.Refer to Repeating playbackon page 36.2During playback, touch thepoint at which you want to re-sume playback the next timethe disc is loaded.Refer to Resume playback(Bookmark) on page 37.3Changing the screen mode.Refer to Changing the widescreen mode on page 41.4Switching the equalizercurves.Refer to Using the equalizeron page 55.Touch and hold for morethan two seconds to turn theauto-equalizer on or off.Refer to Using the auto-equalizer on page 56.5Switching between audiolanguages during playback.Refer to Changing audio lan-guage during playback (Multi-audio) on page 38.6Switching between subtitlelanguages during playback.Refer to Changing the subti-tle language during playback(Multi-subtitle) on page 38.7Switching among viewingangles during playback.Refer to Changing the view-ing angle during playback(Multi-angle) on page 39.8Switching the audio output,when playing video discs re-corded with LPCM audio.Refer to Selecting audio out-put on page 39.Switching between stereoand monaural audio output,when playing Video CDdiscs.<CRB3314-A/N>17En 17Section06Playing moving imagesPlaying moving images
9Starting the search function.Refer to Searching for the partyou want to play on page 38.Refer to Selecting files fromthe file name list on page 40.Displaying iPod menus.Refer to Playing videos fromyour iPod on page 36 andBrowsing for a video/musicon the iPod on page 36.aReturning to normal play-back during paused, slowmotion, or frame-by-frameplayback.Pausing playbackbDisplaying the DVD menuduring DVD playback.Refer to Operating the DVDmenu on page 35.cReturning to the top menuduring DVD playback.dStopping playback.Stopping playback at thepoint set in Resume play-back.Touch one more time to stopplayback completely.Refer to Resume playback(Bookmark) on page 37.eDisplaying arrow keys to op-erate the DVD menu.Refer to Using the arrow keyson page 35.fSkipping to another title.Selecting a folder duringDivX file playback.gMoving ahead one frame at atime during playback.Refer to Frame-by-frame play-back on page 37.Touch and hold for morethan two seconds to slowdown playback speed.Speeding up the playbackspeed in four steps duringslow motion playback onDVD video/Video CD.hSpeeding down the playbackspeed in four steps, duringslow motion playback onVideo CD.iReturnReturning to the specifiedscene to which the DVD cur-rently being played has beenpreprogrammed to return.Refer to Return to the speci-fied scene on page 39.jPlaying the video on youriPod in a random order.Refer to Random play (shuf-fle) on page 35.kSwitching the Advancedsound retriever function set-ting when playing a video onyour iPod.Refer to Using advancedsound retriever on page 40.lConducting operation fromyour iPod and listening to itusing your car’s speaker’s.Refer to Operating this unit’siPod function from your iPodon page 35.mSwitching between mediafile types to play on DVD/CD/USB/SD.Refer to Switching the mediafile type on page 34.<CRB3314-A/N>18En18Section06 Playing moving images
Playing back videos1Insert the disc into the disc loading slot with thelabel side up.Playback will automatically start.!If you are playing a DVD or Video CD, a menumay appear. Refer to Operating the DVD menu onpage 35 and PBC playback on page 39.!When the automatic playback function is on, theunit will skip the DVD menu and automaticallystart playback from the first chapter of the firsttitle. Refer to Automatic playback of DVDs on page61.1If a disc has already been inserted, press SRC/OFF or touch the source icon to select the source.!When the source icon is not displayed, it can bedisplayed by touching the screen.!Disconnect headphones from the iPod beforeconnecting to this unit.!Depending on the iPod model and the amount ofdata stored in the iPod, it may take some time forplayback to begin.!Use the touch panel keys to select the iPod afterconnecting it to this unit.!No Device is displayed when disconnecting theiPod.1If a message is displayed after loading a disc con-taining DivX VOD content, touch Play.Refer to Playing DivXÒVOD content on page 40.Ejecting a disc1Refer to Ejecting a disc on page 14 or Ejecting anSD on page 15.Selecting a chapter using the buttons1Press cor d(TRACK).Fast forwarding or reversing using the buttons1Press and hold cor d(TRACK).!Fast forward/fast rewind may not always be possi-ble on some discs. In such cases, normal play-back will automatically resume.Notes!This DVD player can play back a DivX file re-corded on CD-R/RW or DVD-R/RW. (Pleasesee the following section for files that can beplayed back. Refer to page 84.)!Do not insert anything other than a DVD (-R/-RW) or CD (-R/-RW) into the disc loading slot.!If the bookmark function is on, DVD playbackresumes from the selected point. For more de-tails, refer to Resume playback (Bookmark) onpage 37.!Some operations may not be available whilewatching a DVD due to the programming ofthe disc. In such cases, the icon appearson the screen.!To ensure proper operation, connect the dockconnector cable from the iPod directly to thisunit.!If the ignition switch is set to ACC or ON, theiPod battery will be charged while connected.However, the iPod battery is not charged whenyou select an SD as the source.!While the iPod is connected to this unit, theiPod cannot be turned on or off.However, the iPod can be turned on or offwhen you select an SD as the source.<CRB3314-A/N>19En 19Section06Playing moving imagesPlaying moving images
Introduction of soundplayback operationsYou can listen to DVD-R/DVD-RW/CD/CD-R/CD-RW/USB/SD/iPod sound files.AbcdeabcdeabcdeabcdeabWed 28 may12:45 PM12501:45ROMALLSongsgS.Rtrv-02:45AbcdeabcdeabcdeabcdeabAbcdeabcdeabcdeabcdeab87666111222333444999777555888CDAbcdeabcdeabcdeabcdeabWed 28 may12:45 PM01:45ALL SongsS.Rtrv-02:45AbcdeabcdeabcdeabcdeabAbcdeabcdeabcdeabcdeab2067/12345iPod6hc d e1 a b 3 4 5gf iiPod audioYou can control an iPod with this unit by usinga cable such as the CD-IU50 (sold separately).1Touch panel keys1Selecting the repeatrange.Refer to Repeating play-back on page 36.2Playing songs in randomorder.Refer to Random play(shuffle) on page 35.3Switching the Advancedsound retriever functionsetting when playingaudio.Refer to Using advancedsound retriever on page40.4Switching the equalizercurves.Refer to Using the equali-zer on page 55.Touch and hold for morethan two seconds to turnthe auto-equalizer on oroff.Refer to Using the auto-equalizer on page 56.5Displaying a list of tracktitles/file names to selectsongs on a CD.Refer to Selecting tracksfrom the track title list onpage 39.Displaying the file namelist to select the files.Refer to Selecting filesfrom the file name list onpage 40.Displaying iPod menus.Refer to Browsing for avideo/music on the iPodon page 36.6Pausing and startingplayback7Switching the text infor-mation to display on thisunit when playing MP3/WMA/AAC files.8Selecting a folder.9Switching betweenmedia file types on aDVD/CD/USB/SD.Refer to Switching themedia file type on page34.aPlaying songs on theiPod in random order.Refer to Random play(shuffle) on page 35.<CRB3314-A/N>20En20Section07 Playing audio
bChanging the speed ofaudiobook playback onthe iPod.Refer to Changing audio-book speed on page 40.cSwitching to Link Searchmode to play songs re-lated to the currentlyplaying song on the iPod.Refer to Displaying listsrelated to the currentlyplaying song (Link Search)on page 40.dPlaying all songs on theiPod in random order.Refer to Playing all songsin random order (shuffleall) on page 36.eConducting operationfrom your iPod and listen-ing to it using your car’sspeaker’s.Refer to Operating thisunit’s iPod function fromyour iPod on page 35.2Text informationfDisplaying the Songs liston the iPod.Refer to Searching for avideo/music by categoryon page 36.gDisplaying the Artists liston the iPod.Refer to Searching for avideo/music by categoryon page 36.hDisplaying the Albumslist on the iPod.Refer to Searching for avideo/music by categoryon page 36.3Artwork displayiStarting Album Link Play on your iPodwhen you touch the artwork display.Refer to Displaying lists related to the cur-rently playing song (Link Search) on page 40.Playing back sound1Insert the disc into the disc loading slot with thelabel side up.Playback will automatically start.1If a disc has already been inserted, press SRC/OFF or touch the source icon to select the source.!When the source icon is not displayed, it can bedisplayed by touching the screen.!Disconnect headphones from the iPod beforeconnecting to this unit.!Depending on the iPod model and the amount ofdata stored in the iPod, it may take some time forplayback to begin.!Use the touch panel keys to select the iPod afterconnecting it to this unit.!No Device is displayed when disconnecting theiPod.Ejecting a disc1Refer to Ejecting a disc on page 14 or Ejecting anSD on page 15.Selecting a track using the buttons1Press cor d(TRACK).Fast forwarding or reversing using the buttons1Press and hold cor d(TRACK).Notes!When playing back files recorded as VBR(variable bit rate) files, the play time will not becorrectly displayed if fast forward or reverseoperations are used.!To ensure proper operation, connect the dockconnector cable from the iPod directly to thisunit.!If the ignition switch is set to ACC or ON, theiPod battery will be charged while connected.However, the iPod battery is not charged whenyou select an SD as the source.!While the iPod is connected to this unit, theiPod cannot be turned on or off.However, the iPod can be turned on or offwhen you select an SD as the source.!If the characters recorded on the disc are notcompatible with this unit, those characterswill not be displayed.!Text information may not be correctly dis-played depending on the recorded environ-ment.<CRB3314-A/N>21En 21Section07Playing audioPlaying audio
!USB storage device that can be charged viaUSB will be recharged when plugged in andthe ignition switch is set to ACC or ON.However, the USB storage device that can becharged via USB will not be recharged whenyou select an SD as the source.!Disconnect the USB portable audio player/USB memory when you are done using it.!When you select Clock or Speana on Select-ing the background display on page 68, the art-work is not displayed.<CRB3314-A/N>22En22Section07 Playing audio
Introduction of still imageplayback operationsYou can view still images saved in CD-R/CD-RW/USB/SD.CapturePhotoWed 28 may12:45 PMAbcdeabcdeabcdeAbcdeabcdeabcdeFullOff22555111222333444777666888CD01:45 -02:45When playing a disc containing a mixtureof various media file typesWhen loading a CD-R/RW/USB/SD containingJPEG picture files, this unit starts a slideshowfrom the first folder/picture on the disc/device.The player displays the pictures in each folderin alphabetical order.The table below shows the controls for viewinga slideshow.1Touch panel keysTouch any of the following touch panel keys toselect the function to be adjusted.1Selecting the repeat range.Refer to Repeating playbackon page 36.2Playing files in a randomorder.Refer to Random play (shuf-fle) on page 35.3Changing the screen modeRefer to Changing the widescreen mode on page 41.4Displaying the file namelist to select the files.Refer to Selecting files fromthe file name list on page40.5Starting or pausing the sli-deshow.6Rotating the displayed pic-ture 90° clockwise7Capturing an image inJPEG files.Refer to Capture an imagein JPEG files on page 41.8Selecting a folder.9Switching between mediafile types.Refer to Switching themedia file type on page 34.Playing still images1Insert the disc into the disc loading slot with thelabel side up.Playback will automatically start.1If a disc has already been inserted, press SRC/OFF or touch the source icon to select the source.!When the source icon is not displayed, it can bedisplayed by touching the screen.Ejecting a disc1Refer to Ejecting a disc on page 14 or Ejecting anSD on page 15.Selecting a file using the buttons1Press cor d(TRACK).Fast file searching1Press and hold cor d(TRACK).!You can search 10 JPEG files at a time.<CRB3314-A/N>23En 23Section08Playing still imagesPlaying still images
Notes!This unit can play back a JPEG file recordedon CD-R/RW/ROM/SD/USB storage device.(Please see the following section for files thatcan be played back. Refer to page 84.)!Files are played back in file number order andfolders are skipped if they contain no files. (Iffolder 01 (ROOT) contains no files, playbackcommences with folder 02.)Introduction of still imageplayback as a slideshowoperationsYou can view still images saved in CD-R/CD-RW/USB/SD as a slideshow when listening toanother source.CaptureFullOff82221116633377444555The table below shows the controls for viewinga slideshow.1Touch panel keysTouch any of the following touch panel keys toselect the function to be adjusted.1Selecting the repeat range.Refer to Repeating playbackon page 36.2Playing files in a randomorder.Refer to Random play (shuf-fle) on page 35.3Changing the screen modeRefer to Changing the widescreen mode on page 41.4Selecting a folder.5Selecting a file.6Starting or pausing the sli-deshow.7Rotating the displayed pic-ture 90° clockwise8Capturing an image inJPEG files.Refer to Capture an imagein JPEG files on page 41.1 Start slideshow when listening to an-other source.Refer to Common operations for menu set-tings/lists on page 13.Displaying still images as a slideshow.2 Select the device containing the filesthat you want to display.!Disc –Built-in DVD player!USB –USB!SD –SD memory card#To cancel searching, touch Cancel.Notes!When the USB or SD source is selected, thisunit cannot view still images on USB/SD as aslideshow.!When MW/LW band is selected, this unit can-not view still images as a slideshow.<CRB3314-A/N>24En24Section08 Playing still images
Introduction of Bluetoothtelephone operationsWed 28 may112:45 PM 87.5 MHzP.CH 2Band:FM1RadioABCDEHGHI01234567890101Off OnAbcdeabcdeabcdeAbcdeabcdeabcdeAbcdeabcdeabcde11457222111666333Telephone standby displayWed 28 may112:45 PMABCDEHGHI01234567890101123456789*0#+COff8 ba9When switching to the enteringphone number modeYou can use Bluetooth telephone (AVH-P5200BTonly).Important!Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using it without the engine run-ning can drain the battery power.!Advanced operations that require attentionsuch as dialing numbers on the monitor, etc.,are prohibited while driving. Park your vehiclein a safe place when using these advancedoperations.!Operations available may be limited depend-ing on the cellular phone connected to thisunit.!Be sure to park your vehicle in a safe placeand apply the parking brake when performingthis operation.1Incoming call noticeIndicates that an incoming call has been re-ceived and has not been checked yet.!Not displayed for calls made when yourcellular phone is disconnected from thisunit.2Touch panel keys1Switching the mode to enterthe phone number directly.Refer to Making a call by en-tering phone number on page49.2Switching to the call historylist.Refer to Using the missed, re-ceived and dialed call lists onpage 48.3Switching to the phone bookmode.Refer to Calling a number inthe phone book on page 47.Refer to Selecting a numberby alphabet search mode onpage 47.4Turning automatic answeringon or off.Refer to Setting automatic an-swering on page 49.5Turning the ring tone for in-coming calls on or off.Refer to Switching the ringtone on page 49.6Displaying the preset dialscreen.Refer to Using the preset diallists on page 49.7Displaying the Bluetoothconnection menu.Refer to the instructionsfrom page 50 to page 52.8Turning private mode on oroff.Refer to Setting the privatemode on page 50.<CRB3314-A/N>25En 25Section09Bluetooth TelephoneBluetooth Telephone
9Adjusting the other party’slistening volume.Refer to Adjusting the otherparty’s listening volume onpage 49.aAccepting an incoming call.Making a phone call, whenselecting a phone number.Switching between callers onhold.bEnding a call.Rejecting an incoming call.Canceling call waiting.Accepting an incoming callEnding a call1Press MUTE/.Notes!Private mode can only be operated while youare talking on the phone.!To end the call, both you and the other callermust hang up your phones.Setting up for hands-free phoningBefore you can use the hands-free phoningfunction you must set up the unit for use withyour cellular phone. This entails establishing aBluetooth wireless connection between thisunit and your phone, registering your phonewith this unit, and adjusting the volume level.1ConnectionFirst, you need to connect a Bluetooth telephoneto this unit.For detailed instructions on connecting yourphone to this unit via Bluetooth wireless technol-ogy, see following section. Using a Bluetooth de-vice to pair on page 51 and Pairing from this uniton page 50.!You may also need to enter a PIN code intothis unit. If your telephone requires a PINcode to establish a connection, look for thecode on the telephone or in its accompanyingdocumentation. Refer to Entering PIN code forBluetooth wireless connection on page 52.2Volume adjustmentAdjust the earpiece volume of your cellular phoneto your preference. The unit will record the ad-justed volume level as the default setting.!The volume of the caller’s voice and ring tonemay vary depending on the type of cellularphone.!If there is a large volume difference betweenthe ring tone and caller’s voice, the overall vo-lume level may become unstable.!Make sure to adjust the volume to a properlevel before disconnecting the cellular phonefrom the unit. If the volume is muted (zerolevel) on your cellular phone, the volume levelof your cellular phone remains muted evenafter the cellular phone is disconnected.<CRB3314-A/N>26En26Section09 Bluetooth Telephone
Introduction of XM/SIRIUStuner operationsAbcdeabcdeabcdeWed 28 may12:45PMCH183P.CH PP2Band:SIRIUS2SIRIUSAbcdeabcdeabcdeSIRIUSCH183MemoOffModeAll CHTeamOff6665444111222333777MemooEditTeamSettingInstantReplayGameInfoMemo999aaabbbcccddd888SIRIUS tunerAbcdeabcdeabcdeWed 28 may12:45 PMCH183P. c h 2Band:XMAbcdeabcdeabcdeAbcdeabcdeabcdeAbcdeabcdeabcde CH183ModeAll CHXMXM6541MemoEditMemo8abXM tunerYou can use this unit to control an XM satellitedigital tuner (GEX-P920XM), which is sold se-parately.For details concerning operation, refer to theXM tuner’s operation manuals. This sectionprovides information on XM operations withthis unit which differs from that described inthe XM tuner’s operation manual.When the SIRIUS tuner is used together withthis unit, some operations differ slightly fromthose described in the SIRIUS operation man-ual. This manual provides information onthese points. For all other information onusing the SIRIUS tuner, please refer to the SIR-IUS operation manual.!With this unit, you can operate one addi-tional function: XM/SIRIUS channel directselection. Refer to Selecting an XM/SIRIUSchannel directly on page 43.1Touch panel keys1ModeAll CHModeCategorySelecting a channel by num-ber or category.Refer to Switching the XM/SIRIUS channel selectionmode on page 42.2MemoOnMemoOffTuning the MyMix functionon or off for the SIRIUS tuner.Refer to Turning the MyMixfunction on or off. on page 44.3TeamOnTeamOffTurning the Game Alert on oroff for the SIRIUS tuner.Refer to Switching the GameAlert on or off on page 45.4Switching the equalizercurves.Refer to Using the equalizeron page 55.Touch and hold for morethan two seconds to turn theauto-equalizer on or off.Refer to Using the auto-equalizer on page 56.5Displaying the preset chan-nel list.Refer to Storing and recallingstations on page 33.Selecting a channel directly.Refer to Selecting an XM/SIR-IUS channel directly on page43.Selecting a channel from theXM channel list.Refer to Selecting a channelfrom the XM channel list dis-play on page 42.<CRB3314-A/N>27En 27Section10XM/SIRIUS tunerXM/SIRIUS tuner
6Band:Selecting a band (XM1,XM2or XM3) for XM tuner.Selecting a band (SIRIUS1,SIRIUS2 or SIRIUS3) for theSIRIUS tuner.8Recalling radio station fre-quencies assigned to presettuning keys.Refer to Storing and recallingstations on page 33.Selecting the channel cate-gory when selecting ModeCategory.Refer to Switching the XM/SIRIUS channel selectionmode on page 42 and Select-ing a SIRIUS channel from achannel category on page 42.9InstantReplaySelecting a track, fast for-warding/reversing or paus-ing/playing for the SIRIUStuner.Refer to Using the Instant Re-play function on page 46.aMemoStoring the song title and ar-tist name.Refer to Making the MyMixplaylist on page 43.bMemoEditSwitching to memo editmode.Refer to Setting up a songalert on page 44.Refer to Deleting a song fromthe MyMix playlist for XMtuner on page 44.Refer to Deleting a song fromthe MyMix playlist for SIRIUStuner on page 44.cGameInfoDisplaying information ongames for the SIRIUS tuner.Refer to Displaying game in-formation on page 46.dTeamSettingSelecting teams for gamealert on the SIRIUS tuner.Refer to Selecting teams forGame Alert on page 45.1SIRIUS tuner information7Switching the SIRIUS information.Refer to Switching the SIRIUS display onpage 46.Touch and hold for more than two secondsto scroll the text.Manual tuning (step by step) using the buttons1Press cor d(TRACK).Seek tuning using the buttons1Press and hold cor d(TRACK).NoteYou can also perform tuning from a desired chan-nel category. (Refer to Selecting a SIRIUS channelfrom a channel category on page 42.)<CRB3314-A/N>28En28Section10 XM/SIRIUS tuner
Introduction of HD Radioätuner operationsAbcdeabcdeabcdeWed 28 may12:45 PM87.9 MHzP.CH 2Band:FM1TAGDigitalRadioLocal87.9 MHzSeekAllBlendingD/A Auto67 89145You can use this unit to control an HD Radiotuner (e.g. GEX-P20HD), which is sold sepa-rately.For details concerning operation, refer to theHD Radio tuner’s operation manual.1Touch panel keys1Turning local seek tuning onor off.Refer to Tuning in to strongHD Radio signals on page 33.2SeekAllSeekHDSwitching between Digitalbroadcasting station seekand normal seek.Refer to Switching the seekmode on page 47.3BlendingAnalogBlendingD/A AutoSwitching to the analogbroadcast of the same fre-quency.Refer to Switching the recep-tion mode on page 47.4Switching the equalizercurves.Refer to Using the equalizeron page 55.Touch and hold for morethan two seconds to turn theauto-equalizer on or off.Refer to Using the auto-equalizer on page 56.5Displaying the preset chan-nel list.Refer to Storing and recallingstations on page 33.6Band: Selecting a band (FM1, FM2,FM3 for FM or AM).8Recalling radio station fre-quencies assigned to presettuning keys.Refer to Storing and recallingstations on page 33.9TAG Saving song information(tag) from the broadcastingstation to your iPod.1Digital Radio tuner information7Switching the digital radio tuner informa-tion.Manual tuning (step by step) using the buttons1Press cor d(TRACK).Seek tuning using the buttons1Press and hold cor d(TRACK).<CRB3314-A/N>29En 29Section11HD RadioätunerHD Radioätuner
Introduction of Bluetoothtelephone operationsAbcdeabcWed 28 may12:45 PMREGTextTTScrollTEL444555666777888999aaa111222333You can control the Bluetooth telephone if youconnect a Bluetooth adapter, such as the CD-BTB200 (sold separately), to the AVH-P5200DVD.Important!In some countries, CD-BTB200 is not sold onthe market.!Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using it without the engine run-ning can drain the battery power.!Advanced operations that require attentionsuch as dialing numbers on the monitor,using the phone book, etc., are prohibitedwhile driving. Park your vehicle in a safe placewhen using these advanced operations.!Operations available may be limited depend-ing on the cellular phone connected to thisunit.1Touch panel keys1Switching the equalizercurves.Refer to Using the equalizeron page 55.Touch and hold for morethan two seconds to turn theauto-equalizer on or off.Refer to Using the auto-equalizer on page 56.2Accepting an incoming call.Making a phone call, whenselecting a phone numberfrom the dialed and receivedcall history.3Ending a call.Rejecting an incoming call.Canceling call waiting.4Displaying the received/missed call history.Selecting a phone numberfrom the call history.Refer to Using the missed, re-ceived and dialed call lists onpage 48.5Displaying the dialed call his-tory.Selecting a phone numberfrom the call history.Refer to Using the missed, re-ceived and dialed call lists onpage 48.6TextScrollScrolling the phone number.Touch and hold for morethan two seconds to activateconnection mode on thisunit and establish a Blue-tooth wireless connectionfrom your phone.Refer to Using a cellularphone to initiate a connectionon page 52.7Registering connected cellu-lar phone to take full advan-tage of the features availablewith Bluetooth wireless tech-nology.Refer to Registering a con-nected cellular phone onpage 52.Touch and hold for morethan two seconds to termi-nate the Bluetooth wirelessconnection.<CRB3314-A/N>30En30Section12 Using Bluetooth wireless technology
8Turning automatic answeringon or off.Refer to Setting automatic an-swering on page 49.Touch and hold for morethan two seconds to connectto a Bluetooth telephoneautomatically.Refer to Connecting to a Blue-tooth device automatically onpage 53.9Turning the ring tone for in-coming calls on or off.Refer to Switching the ringtone on page 49.Touch and hold for morethan two seconds to displaythe BD address of your cellu-lar phone and the Bluetoothadapter.Refer to Displaying BD (Blue-tooth Device) address onpage 53.aSwitching between Bluetoothtelephone and Bluetoothaudio.Touch and hold for morethan two seconds to startvoice recognition.Refer to Voice recognition onpage 53.NoteWhen selecting the phone source, you can onlyoperate Fader/Balance (balance adjustment) inthe audio menu.Bluetooth audio operationsYou can control Bluetooth audio if you con-nect a Bluetooth adapter, such as the CD-BTB200 (sold separately), to the AVH-P5200DVD.Important!Depending on the Bluetooth audio player con-nected to this unit, the available operationswill be limited to the following two levels:—A2DP profile (Advanced Audio DistributionProfile): You can only playback songs onyour audio player.—AVRCP profile (Audio/Video Remote Con-trol Profile): You can perform playback,pause playback, select songs, etc.!Since there are a number of Bluetooth audioplayers available on the market, available op-erations will vary extensively. When operatingyour player with this unit, refer to the instruc-tion manual that came with your Bluetoothaudio player as well as this manual.!Information related to a song (such as theelapsed playing time, song title, song index,etc.) cannot be displayed on this unit.!As the signal from your cellular phone maycause noise, avoid using it when you are lis-tening to songs on your Bluetooth audioplayer.!When a call is in progress on the cellularphone connected to this unit via Bluetoothwireless technology, the sound of the Blue-tooth audio player connected to this unit ismuted.!When the Bluetooth audio player is in use,you cannot connect to a Bluetooth telephoneautomatically.!Playback continues even if you switch fromyour Bluetooth audio player to another sourcewhile listening to a song.1Touch panel keysSwitching between Bluetooth tele-phone and Bluetooth audio.Skipping back or forward to an-other track when Auto is set forthe Auto/manual setting.Performing fast forward or rewindwhen Manual is set for the Auto/manual setting.<CRB3314-A/N>31En 31Section12Using Bluetooth wireless technologyUsing Bluetooth wireless technology
F1Pausing a song.Touch and hold for more than twoseconds to activate connectionmode on this unit and establish aBluetooth wireless connectionfrom your player.Refer to Connecting a Bluetoothaudio player on page 53.F2Playback starts.Touch and hold for more than twoseconds to terminate the Blue-tooth wireless connection.AutoSetting the action for cand dicons.Switching the equalizer curves.Refer to Using the equalizer onpage 55.Touch and hold for more than twoseconds to turn the auto-equalizeron or off.Refer to Using the auto-equalizeron page 56.Setting up for Bluetooth audioBefore you can use the Bluetooth audio func-tion you must set up the unit for use with yourBluetooth audio player. This entails establish-ing a Bluetooth wireless connection betweenthis unit and your Bluetooth audio player, andpairing your Bluetooth audio player with thisunit.1ConnectionFirst, you need to connect a Bluetooth audio tothis unit.For detailed instructions on connecting yourBluetooth audio to this unit via Bluetooth wirelesstechnology, see Connecting a Bluetooth audioplayer on page 53.<CRB3314-A/N>32En32Section12 Using Bluetooth wireless technology
Storing and recalling stationsYou can easily store up to six stations for eachband as presets.!Six stations for each band can be stored inmemory.!Channels are stored and recalled on abroadcast station basis. This means that ifthe broadcast station you stored has beenassigned to a different channel by SIRIUS,you can still recall the same broadcast sta-tion (though a different channel numbermay appear in the display).1 Display the preset screen.Refer to Introduction of tuner operations onpage 16.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.Refer to Introduction of HD Radioätuner opera-tions on page 29.The preset screen appears in the display.2 Touch and hold one of the preset tun-ing keys to store the selected frequency inthe memory.The selected radio station frequency has beenstored in the memory.3 Touch one of the preset tuning keys toselect the desired station.#You can also use aand bto recall stationsassigned to preset tuning keys P1 to P6 when theALL-CH mode is selected.(Function of SIRIUS tuner)Storing the strongest stationsBSM (best stations memory) automaticallystores the six strongest stations in the order oftheir signal strength.Storing broadcast frequencies with BSM mayreplace broadcast frequencies you have savedusing the preset tuning keys.1 Display the preset channel list.Refer to Introduction of tuner operations onpage 16.Refer to Introduction of HD Radioätuner opera-tions on page 29.The preset screen appears in the display.2 Touch BSM to turn BSM on.The six strongest broadcast frequencies willbe stored under preset tuning keys in order oftheir signal strength.#To cancel the storage process, touchCancel.Tuning in to strong signalsLocal seek tuning lets you tune in to onlythose radio stations with sufficiently strongsignals for good reception.FM: off —— — —AM: off — —The larger the setting number, the higher thesignal level. The highest level setting allows re-ception of only the strongest stations; whilelower settings let you receive progressivelyweaker stations.Tuning in to strong HDRadio signalsLocal seek tuning lets you tune in to onlythose radio stations with sufficiently strongsignals for good reception.1 Start local seek tuningRefer to Introduction of HD Radioätuner opera-tions on page 29.2 Touch On on LOCAL to turn on.#To turn off, touch Off.3 Touch cor don Level to select the de-sired level.#Level1—Level2—Level3—Level4<CRB3314-A/N>33En 33Section13Detailed instructionsDetailed instructions
#The larger the setting number, the higher thesignal level. The highest level setting allows re-ception of only the strongest stations; while lowersettings let you receive progressively weakerstations.Using iTunes taggingThis function can be operated with the followingiPod models.—iPod 5th generation—iPod nano 3rd generation—iPod nano 4th generation—iPod classic—iPod classic 2nd generation—iPod touch—iPod touch 2nd generation—iPhone—iPhone 3GHowever, tag information can be stored in thisunit even while other iPod models are used.When you want to use this function in the HDRadio tuner source, use an HD Radio tuner(GEX-P20HD).The song information (tag) can be saved fromthe broadcasting station to your iPod. Thesongs will show up in a playlist called “Taggedplaylist”in iTunes the next time you sync youriPod. Then you can directly buy the songs youwant from the iTunes Store.The tagged songs and the song that you canbuy from the iTunes Store may be different.Make sure to confirm the song before youmake the purchase.If you cannot use this function normally, up-date your iPod firmware.Storing the tag information tothis unit1 Tune in to the broadcast station.2 Store the tag information to this unit.Refer to Introduction of tuner operations onpage 16.Refer to Introduction of HD Radioätuner opera-tions on page 29.You can store the information if the TAG indi-cator is displayed while the desired song isbeing broadcast.#While storing the tag data on this unit, TAGflashes.#The tag information for up to 50 songs can bestored on this unit.Depending on the timing of when the tag infor-mation is stored, the tag information for the songplayed before or after the currently playing songmay also be stored.#If an SD is selected as the source while tag in-formation is being stored to this unit, the tag in-formation will not be transferred to the iPod.3 When completed, indicator turnsoff and indicator is displayed.Storing the tagged informationto your iPod1 Connect your iPod if it's not connectedto this unit.When your iPod is connected to this unit, youriPod starts storing the tagged informationautomatically.#While transferring the tag, you cannot selectthe SD source.2 When completed, indicator on page80 turns off and the tagged information isstored on your iPod.#Tag information cannot be transferred to theiPod when a file on an SD device is being viewedas a slideshow.Switching the media file typeWhen playing a disc containing a mixture ofvarious media file types, such as DivX andMP3, you can switch between media file typesto play.<CRB3314-A/N>34En34Section13 Detailed instructions
Audio data (CD-DA) and JPEG picture files onDVD-R/RW/ROM cannot be played back onthis unit.CD (audio data (CD-DA))—Music (com-pressed audio)—Video (DivX video files)—Photo (JPEG picture files)Operating the DVD menu(Function for DVD video)Some DVDs allow you to make a selectionfrom the disc contents using a menu.Using the arrow keys1 Display arrow keys to operate the DVDmenu.Refer to Playing moving images on page 17.2 Select the desired menu item.Selecting the desired menu item.Starting playback from the se-lected menu item.Operating the DVD menu by di-rectly touching the menu item.#When operating the DVD menu by directlytouching the menu item, touch the icon to oper-ate.Returning to the normal DVD videodisplay.Displaying arrow keys.#Ways to display the menu will differ depend-ing on the disc.#Depending on the contents of the DVD disc,this function may not work properly. In suchcases, use the touch panel keys to operate theDVD menu.Operating this unit’s iPodfunction from your iPod!While this function is in use, the iPod willnot turn off even if the ignition key is turnedoff. Operate the iPod to turn off the power.!When the control mode is set to iPod, thesignal can be changed between PAL andNTSC from the iPod.1 Switch the control mode to iPod.Refer to Playing moving images on page 17.Refer to Introduction of sound playback opera-tions on page 20.2 Operate the connected iPod to select avideo/song and play.Random play (shuffle)Videos/songs can be played back in randomorder.!Songs –Play back videos/songs in the se-lected list in random order.!Albums –Play back videos/songs from arandomly selected album in order.!Folder –Play back songs/tracks in the se-lected folder in random order.!Disc –Play back songs/tracks in the se-lected disc in random order.!On –Play back files in random order withinthe repeat range, Folder and Disc.!Off –Cancel random play.<CRB3314-A/N>35En 35Section13Detailed instructionsDetailed instructions
Playing all songs in randomorder (shuffle all)(Function for iPod)This method plays all songs on the iPodrandomly.Repeating playback!Disc –Play through the current disc!Chapter –Repeat the current chapter!Title –Repeat the current title!Track –Repeat the current track!File –Repeat the current file!Folder –Repeat the current folder!One –Repeat just the current video/song/track!All –Repeat all videos/songs in the se-lected list on the iPodRepeat all files!This function cannot be operated duringVideo CD playback featuring PBC (playbackcontrol).!If you perform chapter search, fast forward/reverse, frame-by-frame playback or slowmotion playback, the repeat play will stop.!When playing discs with compressed audioand audio data (CD-DA), playback is re-peated within the type of data currentlyplaying even if Disc is selected.!If you select another folder during repeatplay, the repeat play range changes to Disc.If you select USB or SD source, the repeatplay range changes to All.!If you perform track search or fast forward/reverse during File, the repeat play rangechanges to Folder.!If you perform track search or fast forward/reverse during Chapter, the repeat playrange changes to Title.!If you perform track search or fast forward/reverse during Track, the repeat play rangechanges to Disc.!When Folder is selected, it is not possibleto play back a subfolder of that folder.Playing videos from your iPod(Function for iPod)Videos can be played on this unit if an iPodwith video capabilities is connected.!This unit can play back “Movies”,“Music vi-deos”,“Video Podcast”and “TV show”which are downloaded from the iTunesstore.!Before you display the video screen, besure to change the video setting on theiPod so that the iPod can output the videoto an external device.1 Display the iPod menus.Refer to Playing moving images on page 17.2 Switch to iPod video mode.VideoSwitching to iPod video mode.3 Play the video from the iPod.#If you want to switch to iPod music mode,touch the icon.MusicSwitching to iPod music mode.Browsing for a video/musicon the iPod(Function for iPod)To make operating and searching easy, opera-tions to control an iPod with this unit are de-signed to be as similar to the iPod as possible.!Incompatible text saved on the iPod will notbe displayed by the unit.Searching for a video/music bycategory1 Display the iPod menus.Refer to Playing moving images on page 17.<CRB3314-A/N>36En36Section13 Detailed instructions
Refer to Playing audio on page 20.2 Touch one of the categories in whichyou want to search for a video/music.!Video Playlists (video playlists)!Movies (movies)!Music Videos (music videos)!Video Podcasts (video podcasts)!TV Shows (TV shows)!Playlists (playlists)!Artists (artists)!Albums (albums)!Songs (songs)!Podcasts (podcasts)!Genres (genres)!Composers (composers)!Audiobooks (audiobooks)3 Touch the title of the list that you wantto play.Repeat this operation until you find the de-sired video/music.4 Start playback of the selected list.Starting playback of the selected list.Searching the list by alphabet(Function for iPod)1 Select a category.Refer to Searching for a video/music by cate-gory on the previous page.2 Switch to alphabet search mode.Switching to alphabet search mode.Alphabet search mode is displayed.3 Touch the first letter of the title of thevideo/song you are looking for.While searching, touch panel key operation isnot available.#To refine the search with a different letter,touch Cancel.4 Touch the title of the list that you wantto play.Repeat this operation until you find the de-sired song/video.5 Start playback of the selected list.Starting playback of the selected list.Resume playback (Bookmark)(Function for DVD video)By using the Bookmark function, you can re-sume playback from a selected scene the nexttime the disc is loaded.The selected scene will be bookmarked so thatplayback resumes from that point next time.!To clear the bookmark on a disc, touch andhold the button during playback.!The oldest bookmark is replaced by thenew one.Frame-by-frame playback(Function for DVD video/video CD)Images during frame-by-frame playback maybe unclear for some discs.Slow motion playbackNotes!There is no sound during slow motion play-back.!Images during slow motion playback may beunclear for some discs.!Reverse slow motion playback is notavailable.<CRB3314-A/N>37En 37Section13Detailed instructionsDetailed instructions
Searching for the part youwant to playYou can use the search function to find thepart you want to play.For DVD videos, you can select Title (title),Chapter (chapter) or 10key (numeric keypad).For video CDs, you can select Track(track) or10key(numeric keypad).!Chapter search is not available when discplayback is stopped.!This function cannot be operated duringVideo CD playback featuring PBC (playbackcontrol).1 Start the search function.Refer to Playing moving images on page 17.2 Touch the desired search option (e.g.,Chapter).3 Touch 0 to 9 to input the desired num-ber.#To cancel the entered numbers, touch C.4 Start playback from the selected part.Registering the numbers.#This starts playback from the selected part.NoteWith discs featuring a menu, you can also usethe DVD menu to make your selection.Refer to Playing moving images on page 17.Changing audio languageduring playback (Multi-audio)With DVDs/DivX files that provides audio play-back in different languages and differentaudio systems (Dolby Digital, DTS, etc.), youcan switch between languages/audio systemsduring playback.Notes!With some DVDs, switching between lan-guages/audio systems may only be possibleusing a menu display.!You can also switch between languages/audiosystems using Video setup menu. For details,refer to Setting the audio language on page 58.!Only digital output of DTS audio is possible. Ifthe unit’s optical digital outputs are not con-nected, select an audio setting other thanDTS.!Depending on the setting, the video may notbe played back with the audio system used torecord the DVD.!You will return to normal playback if youchange the Audio during fast forward/fast re-wind, pause or slow motion playback.Changing the subtitlelanguage during playback(Multi-subtitle)With DVDs/DivX files featuring multi-subtitlerecordings, you can switch between subtitlelanguages during playback.Notes!With some DVDs, switching between subtitlelanguages may only be possible using a menudisplay.!You can also switch between subtitle lan-guages using Video setup menu. For details,refer to Setting the subtitle language on page58.!You will return to normal playback if youchange the Subtitle during fast forward/fastrewind, pause or slow motion playback.<CRB3314-A/N>38En38Section13 Detailed instructions
Changing the viewing angleduring playback (Multi-angle)With DVDs featuring multi-angle (scenes shotfrom multiple angles) recordings, you canswitch among viewing angles during play-back.!During playback of a scene shot from mul-tiple angles, the angle icon is displayed.Use the Video setup menu to turn theangle icon display on or off. For details,refer to Setting the multi-angle DVD displayon page 59.NoteYou will return to normal playback if you changethe viewing angle during fast forward/fast rewind,pause or slow motion playback.Return to the specified scene(Function for DVD video)This function cannot be used if a specifiedscene has not been preprogrammed on theDVD disc.Selecting audio outputWhen playing DVD video discs recorded withLPCM audio, you can switch the audio output.When playing video CDs, you can switch be-tween stereo and monaural audio output.!This function is not available when discplayback is stopped.!L+R –left and right!Left –left!Right –right!Mix –mixing left and rightYou may not be able to select or use this func-tion depending on the disc and the playbacklocation.PBC playback(Function for Video CDs)During playback of Video CDs featuring PBC(Playback Control), PBC ON is displayed.1 Start the search function.Refer to Playing moving images on page 17.2 Touch 10key to display the numerickeypad.3 Touch 0 to 9 corresponding to a menunumber.4 Start playback from the selected part.Registering the numbers.Notes!You can display the menu by touching Returnduring PBC playback. For details, refer to theinstructions provided with the disc.!PBC playback of a Video CD cannot be can-celed.!During playback of Video CDs featuring PBC(Playback Control), you cannot select the re-peat play range or use the search function.Selecting tracks from thetrack title listYou can select tracks to playback using thetrack title list which is a list of the tracks re-corded on a disc.1 Display the track title list.Refer to Playing audio on page 20.2 Touch your favorite track title.Playback begins.<CRB3314-A/N>39En 39Section13Detailed instructionsDetailed instructions
Selecting files from the filename list(Function for USB/SD/DivX)File name list is a list of file names (or foldernames) from which you can select a file (orfolder) to play back.1 Display the file (or folder) name list.Refer to Playing audio on page 20.Refer to Introduction of still image playback op-erations on page 23.2 Touch your favorite file (or folder)name.#When you have selected a folder, a list of thenames of the files (or the folders) in it can beviewed. Repeat this operation to select the de-sired file name.#If folder 01 (ROOT) contains no files, playbackcommences with folder 02.3 Start playback of the selected list.Starting playback of the selected list.Using advanced soundretrieverAutomatically enhances compressed audioand restores rich sound.Off ——!is more effective than .Changing audiobook speed(Function for iPod)!–Playback at a speed faster thannormal!–Playback at normal speed!–Playback at a speed slower than nor-malDisplaying lists related tothe currently playing song(Link Search)(Function for iPod)1 Start Link Play.Refer to Introduction of sound playback opera-tions on page 20.2 Touch one of the categories in whichyou want to play.!Artist –Displays an album list of the artistcurrently being played.!Album –Displays a song list from thealbum currently being played.!Genre –Displays an album list from thegenre currently being played.#To cancel searching, touch Cancel.3 Touch the title of the list that you wantto play.4 Start playback of the selected list.Starting playback of the selected list.!If no related albums/songs are found,Not Found is displayed.Playing DivXÒVOD contentSome DivX VOD (video on demand) contentmay only be playable a fixed number of times.When you load a disc containing this type ofcontent, the remaining number of times it canbe played is shown on-screen. You can thendecide whether or not to play the disc.!If there is no limit to the number of timesthe DivX VOD content can be viewed, thenyou may load the disc into your player andplay the content as often as you like, andno message will be displayed.!You can confirm the number of times thatthe content can be played by checking thenumber displayed after Remaining Views:.<CRB3314-A/N>40En40Section13 Detailed instructions
Important!In order to play DivX VOD content on this unit,you first need to register the unit with yourDivX VOD content provider. For details on yourregistration code, refer to Displaying the DivXÒVOD registration code on page 61.!DivX VOD content is protected by a DRM (Di-gital Rights Management) system. This re-stricts playback of content to specific,registered devices.%If a message is displayed after loadinga disc containing DivX VOD content, touchPlay.Playback of the DivX VOD content will start.#To skip to the next file, touch Next Play.#If you do not want to play the DivX VOD con-tent, touch Stop.Capture an image in JPEG filesYou can capture image data and use it as wall-paper. Images can be stored and recalled ea-sily in this unit.!Only one image can be stored on this unit.Old images are overwritten with the newones.1 Pause the slideshow when the desiredimage is displayed.Refer to Introduction of still image playback op-erations on page 23.Refer to Introduction of still image playback asa slideshow operations on page 24.2 Capture the image.Refer to Introduction of still image playback op-erations on page 23.Refer to Introduction of still image playback asa slideshow operations on page 24.3 When Do you save this image? is dis-played, touch Yes.While storing the image to this unit, Savingthe image Don't switch off the battery. isdisplayed. When the process is finished,Image saved is displayed.#To cancel the storage process, touch No.Changing the wide screenmodeYou can select a desired mode for enlarging a4:3 picture to a 16:9 picture.1 Display the screen mode.Refer to Introduction of video playback opera-tions on page 17.Refer to Introduction of still image playback op-erations on page 23.Refer to Introduction of still image playback asa slideshow operations on page 24.2 Touch the desired wide mode setting.Full (full screen)The 4:3 picture is enlarged in the horizontal direc-tion only, giving you a 4:3 TV picture (normal pic-ture) without any omissions.Just (just)The picture is enlarged slightly at the center andthe amount of enlargement increases horizontallytoward the edges of the screen, enabling you toenjoy a 4:3 picture without sensing any disparityeven when viewing on a wide screen.Cinema (cinema)The picture is enlarged by the same proportion asFull or Zoom in the horizontal direction and byan intermediate proportion between Full andZoom in the vertical direction; ideal for a cinema-sized picture (wide screen picture) where cap-tions lie outside the picture.Zoom (zoom)The 4:3 picture is enlarged in the same proportionboth vertically and horizontally; ideal for a cinemasized picture (wide screen picture).<CRB3314-A/N>41En 41Section13Detailed instructionsDetailed instructions
Normal (normal)The 4:3 picture is displayed as it is, giving you nosense of disparity since its proportions are thesame as that of the normal picture.Notes!You cannot operate this function while driving.!Different settings can be stored for each videosource.!When a video is viewed in a wide screen modethat does not match its original aspect ratio, itmay appear different.!Remember that using the wide mode featureof this system for commercial or public view-ing purposes may constitute an infringementon the author’s rights protected by the Copy-right Law.!The video image will appear coarser whenviewed in Cinema or Zoom mode.Switching the XM/SIRIUSchannel selection modeYou have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory.Mode All CH (channel number select setting)—Mode Category (channel category selectsetting)Selecting a SIRIUS channel froma channel categoryChannels are organized into various programcategories, e.g. Rock, Classic, Jazz while lis-tening to a SIRIUS station. You can specifychannels by selecting the desired category.1 Select channel category selectionmode.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.Mode All CH (channel number select setting)—Mode Category (channel category selectsetting)2 Touch aor bto select the desired chan-nel category.3 Touch cor don the buttons to selectthe desired channel in the selected channelcategory.Selecting a channel from theXM channel list displayThe list content can be switched so you cansearch for the track you want to listen to notonly by the channel name but also by the artistname or song title.!This function is available for GEX-P920XM.!The channel list shows all the channelsduring ALL-CH mode, and the channels in-cluded in the selected category duringMode Category mode.1 Display the preset channel list.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.2 Switch the channel list mode.Switching the channel list mode tothe channel name or the artistname/song title.3 Touch the desired channel that youwant to listen to.<CRB3314-A/N>42En42Section13 Detailed instructions
Selecting an XM/SIRIUSchannel directlyYou can select an XM/SIRIUS channel directlyby entering the desired channel number.1 Display the preset channel list.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.2 Switch to direct input display.Switching to direct input display.3 Touch 0 to 9 to input the desired chan-nel number.#To cancel the input numbers, touch C.4 Select the XM/SIRIUS channel of the en-tered number.The XM/SIRIUS channel of the entered num-ber is selected.Selecting the XM/SIRIUS channel ofthe entered number.Using the MyMix functionThe MyMix function allows you to make aMyMix song playlist. When a song in theMyMix playlist is being broadcast on a stationother than the one you are listening to, youwill be alerted, and you can tune in to theother station to listen to that song.!This function is available for GEX-P920XM.!The track itself is NOT downloaded. Onlythe song title and artist name are stored.Making the MyMix playlistYou can add a song that is being broadcast tothe MyMix playlist. When it is added, the songtitle and its artist name are stored to this unit.The MyMix function will start when you listento a song that matches a song title and its ar-tist name in the MyMix playlist.%Store the song title and artist name.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.The song title and artist name of the song youare listening to are stored, and a confirmationmessage appears.#To delete a song from the MyMix playlist, referto Deleting a song from the MyMix playlist for XMtuner on the next page and Deleting a song fromthe MyMix playlist for SIRIUS tuner on the nextpage.#(XM)The song title and artist name of up to 12 trackscan be stored. Old tracks will be overwrittenwhen saving more than 12 tracks.#(Sirius)The song title and artist name of up to 10 trackscan be stored. Old tracks will be overwrittenwhen saving more than 10 tracks.#You cannot store the song title or the artistname when “––––––––”is displayed for thetitle information.#You cannot store song titles or artist namesfrom channel 000.#Stored titles may not be displayed correctly.When a song in the MyMixplaylist is broadcast(XM tuner)As soon as a song in the MyMix playlist startsbeing broadcast on a different station, a mes-sage is displayed. Touch Yes to switch to thatstation, and you can listen to that song.(SIRIUS tuner)As soon as a stored song starts being broad-cast on a different station, a song alert is dis-played.Switching to the other station to lis-ten to that track.Not tuning in to the other station.<CRB3314-A/N>43En 43Section13Detailed instructionsDetailed instructions
!(XM tuner)If you would rather not to tune in to theother station, touch No.!If an alert for a song in the MyMix playlist isset to off, no alert will be provided evenwhen the song is broadcast. Refer to Set-ting up a song alert on this page.!If the stored title and the title of the songbeing broadcast differ, no alert will be pro-vided even if they are the same song.Turning the MyMix function onor off.You can turn the MyMix function off and stopthe alerts for all the songs in the MyMix play-list. To restart, turn this function on.The MyMix function is on as the default set-ting.%Turn the MyMix function on or off.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.Setting up a song alertYou can set up an alert (on or off) for eachsong in the MyMix playlist. First, display theMyMix playlist and then change each alert set-ting. Set the alert to on to receive an alertwhen the song is broadcast, or set it to off tostop the alert for that song.1 Switch to memo edit mode.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.The MyMix playlist is displayed.2 Select the song title for which youwant to turn the alert on or off.(XM tuner)The check mark is removed, and the alert forthat song is off.(SIRIUS tuner)Selecting the song title for whichyou want to turn the alert off.3 Turn the alert on or off.(SIRIUS tuner)Turning the alert on or off.Deleting a song from theMyMix playlist for XM tunerYou can delete each song in the MyMix play-list.1 Switch to memo edit mode.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.The MyMix playlist is displayed.2 Delete the song title.Deleting the song title.Deleting all the songs in the MyMixplaylist.That song will be deleted from the MyMix play-list.3 A message to confirm deletion will ap-pear. Touch Yes.#To cancel deletion, touch No.Deleting a song from theMyMix playlist for SIRIUS tunerYou can delete each song in the MyMix play-list.1 Switch to memo edit mode.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.<CRB3314-A/N>44En44Section13 Detailed instructions
2 Select the song title that you want todelete.Selecting the song title that youwant to delete.3 Delete the song title.Deleting the song title.4 A message to confirm deletion will ap-pear. Touch Yes.That song will be deleted from the MyMix play-list.#To cancel deletion, touch No.Using the Game Alert functionThis system can alert you when games invol-ving your favorite teams are about to start. Touse this function you need to set up a gamealert for the teams in advance.!This function is available for CD-SB10/SIR-PNR2/SIR-PNR2C.Selecting teams for Game Alert1 Start Game Alert setup.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.2 Select a desired league in LeagueSwitching the league name.3 Select a desired team in Team.Switching the team name.4 Turn the alert on or off.Turning the alert on or off.The game alert function is activated for thatteam.#When you have already selected 12 teams,FULL is displayed and additional teams cannotbe selected. In this case, first delete a selectedteam and then try again.5 Repeat these steps to select otherteams.Up to 12 teams can be selected.Switching the Game Alert on or offOnce you select the teams, you need to turnthe Game Alert function on.The Game Alert function is on at the defaultsetting.When a game of a selectedteam startsWhen a game of the selected team is about tostart (or is currently playing) on a different sta-tion, a game alert is displayed.Switching to the other station to lis-ten to the game.Not tuning in to the other station.<CRB3314-A/N>45En 45Section13Detailed instructionsDetailed instructions
Displaying game informationIf any games of the selected teams are cur-rently playing, you can display information onthe games and tune in to the broadcast chan-nel.1 Display the game information for theselected team.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.2 Touch cor d(TRACK) to select a game.The game is displayed, followed by more de-tailed game information.!The game score will be updated automati-cally.3 Switch to the other station to listen tothe game.Switching to the other station to lis-ten to the game.#If you have not selected any teams, NOT SETis displayed.#When games involving your favorite teams arenot currently playing, NO GAME is displayed.Displaying the Radio IDChannel number selection settingIf you select CH000, the ID code is displayed.%Select CH000.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.Switching the SIRIUS display!Actions will differ depending on the con-nected SIRIUS tuner.%Touch SIRIUS information to switch theSIRIUS display.Refer to Introduction of XM/SIRIUS tuner opera-tions on page 27.Channel number—Channel name—Categoryname—Artist name—Song title/Title name—Composer name—Play timeNote!Play time is displayed during the Instant Re-play mode.Using the Instant ReplayfunctionThe following functions can be operated in In-stant Replay mode.!To use this function, a Pioneer SIRIUS businterface (e.g. CD-SB10) is required.!To use this function, a SIRIUS plug-and-play unit with an Instant Replay Function isrequired.!For details, refer to the SIRIUS plug-and-play unit’s manuals.%To exit from Instant Replay mode, se-lect another source or touch the followingicon.Exiting from Instant Replay mode.%Select a trackPress cor d(TRACK).%Fast forward or reversePress and hold cor d(TRACK).%Pause and playPlaying and pausing.<CRB3314-A/N>46En46Section13 Detailed instructions
Switching the seek modeThere are two seek tuning settings, one is HD(Digital broadcasting stations seek) and theother is ALL (normal seek).ALL—HDSwitching the reception modeIf the reception for a digital broadcast be-comes poor, this unit automatically switchesto the analog broadcast of the same fre-quency. If this function is set to D/A Auto, thetuner switches between digital broadcast andanalog broadcast automatically. If this func-tion is set to Analog, the tuner will only re-ceive analog broadcasts.D/A Auto—AnalogNoteIf SEEK MODE is set to HD and BLENDING is setto Analog, the tuner cannot receive broadcasts.In this case, the seek mode or reception mode ischanged automatically as follows:!When SEEK MODE is set to HD, if you switchBLENDING from D/A Auto to Analog,SEEK MODE is changed to ALL.!When BLENDING is set to Analog, if youswitch SEEK MODE from ALL to HD,BLENDING is changed to D/A Auto.Calling a number in thephone book(Function of AVH-P5200BT)The phone book in your cellular phone will betransferred automatically when the phone isconnected to this unit.After finding the number you want to call inthe phone book, you can select the entry andmake the call.1 Switch to phone book mode.Refer to Introduction of Bluetooth telephone op-erations on page 25.The phone book display appears.2 Select the phone number list.The detailed phone number list of the selectedentry is displayed.3 Select the phone number.#If you want to store the phone number, touchand hold the list.4 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.5 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.NoteDepending on the cellular phone, the phone bookmay not be transferred automatically. In thiscase, operate your cellular phone to transfer thephone book. The visibility of this unit should beon. Refer to Switching visible unit on page 51.Selecting a number byalphabet search mode(Function of AVH-P5200BT)If a lot of numbers are registered in the phonebook, you can search for the phone number byalphabet search mode.1 Switch to phone book mode.Refer to Introduction of Bluetooth telephone op-erations on page 25.The phone book display appears.2 Touch ABC to switch to alphabet searchmode.3 Touch the first letter of the entry youare looking for.The Phone Book entries starting with that let-ter (e.g. “Ben”,“Brian”and “Burt”when “B”isselected) will be displayed.#If you want to change the character to Rus-sian, touch the icon. To return to English, touchthe icon again.<CRB3314-A/N>47En 47Section13Detailed instructionsDetailed instructions
Changing the character to Russian.#The order of the first name and last name maybe different from that of the cellular phone.4 Touch the list to display the phonenumber list of the selected entry.#If several phone numbers are included in anentry, select one by touching the list.#If you want to switch to the call history list,touch the icon.Switching to the call history list.5 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.6 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.Using the missed, receivedand dialed call lists(Function of AVH-P5200BT)The 80 most recent calls dialed, received, andmissed are stored in the memory. You canbrowse them and call numbers from theselists.1 Switch to the call history list.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Select Missed Calls, Dialed Calls orReceived Calls.Displaying the received call list.Displaying the dialed call list.Displaying the missed call list.3 Touch the list number to select a phonenumber.Name and phone number are displayed in thedetailed list.#If you want to store the phone number, touchand hold the list.4 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.5 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.Using the missed, receivedand dialed call lists(Function of AVH-P5200DVD)The 80 most recent calls dialed, received, andmissed are stored in the memory. You canbrowse them and call numbers from theselists.1 Switch to the call history list.Refer to Introduction of Bluetooth telephone op-erations on page 30.2 Touch a phone number or name (if en-tered) you want to call.3 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 30.<CRB3314-A/N>48En48Section13 Detailed instructions
4 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 30.Setting automatic answeringIf this function is on, this unit automaticallyanswers all incoming calls.%Turn automatic answering on or off.(AVH-P5200DVD)Refer to Introduction of Bluetooth telephone op-erations on page 30.(AVH-P5200BT)Refer to Introduction of Bluetooth telephone op-erations on page 25.Adjusting the other party’slistening volume(Function of AVH-P5200BT)To maintain the good sound quality, this unitcan adjust the other party’s listening volume.If the volume is not loud enough for the otherparty, use this function.%Select Far end Volume.Refer to Introduction of Bluetooth telephone op-erations on page 25.1—2—3#This function can be performed even whiletalking on the phone.#Settings can be stored for each device.Switching the ring toneYou can select whether or not to use thisunit’s ring tone. If this function is set to on,the ring tone for this unit will sound.1 Connect your cellular phone to thisunit.2 Turn ring tone on or off.(AVH-P5200DVD)Refer to Introduction of Bluetooth telephone op-erations on page 30.(AVH-P5200BT)Refer to Introduction of Bluetooth telephone op-erations on page 25.Using the preset dial lists(Function of AVH-P5200BT)You can easily store up to six phone numbersas presets.1 Display the preset screen.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch one of preset dial keys to selectthe desired phone number.#If you want to delete a preset phone number,touch and hold the preset dial key.3 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.4 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.Making a call by enteringphone number(Function of AVH-P5200BT)Wed 28 may112:45 PMABCDEHGHI01234567890101123456789*0#+COffImportantBe sure to park your vehicle in a safe place andapply the parking brake when performing this op-eration.<CRB3314-A/N>49En 49Section13Detailed instructionsDetailed instructions
1 Switch to the entering phone numbermode.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch the number icons to input thenumbers.#Up to 24 digits can be entered.3 Make the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.4 End the call.Refer to Introduction of Bluetooth telephone op-erations on page 25.NoteEntering phone number mode cannot be oper-ated unless a Bluetooth telephone is connectedto this unit.Setting the private mode(Function of AVH-P5200BT)During a conversation, you can switch to pri-vate mode (talk directly on your cellularphone).Refer to Introduction of Bluetooth telephone op-erations on page 25.Pairing from this unit(Function of AVH-P5200BT)Connection01: Phone1 02: Phone203: Phone304: Phone4 05: Phone51 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch Connection to select a device.3 Start to search.Starting to search.While searching, is displayed and whenavailable devices are found, the device namesor BD addresses (if names cannot be ob-tained) are displayed.#If you want to switch between the devicenames and BD addresses, touch the icon.Switching between the devicenames and BD addresses.#To cancel searching, touch Stop.#If five devices are already paired,Memory Full is displayed and pairing cannot beperformed. In such cases, delete a paired devicefirst. Refer to Deleting a paired device. on the nextpage.#If no device can be found, Not Found is dis-played. In such cases, check the status of theBluetooth device and search again.4 Touch a device name to select the de-vice you want to connect to.While connecting, Pairing is displayed. If theconnection is established, Paired is displayed.#If the connection fails, Connection Error isdisplayed. In such cases, try again from the be-ginning.#The PIN code is set to 0000 as the default, butcan be changed. Refer to Entering PIN code forBluetooth wireless connection on page 52.#When establishing connection, the icon is dis-played.Touch the icon to disconnect the device.Disconnecting a Bluetooth device.#If you want to delete a paired Bluetooth tele-phone, display Delete OK?. Touch Yes to deletethe device.<CRB3314-A/N>50En50Section13 Detailed instructions
Deleting a paired device.#Never turn the unit off while the paired Blue-tooth telephone is being deleted.Using a Bluetooth device topair(Function of AVH-P5200BT)If you cannot open the connection betweenyour Bluetooth device and this unit from yourBluetooth device, you can use this function toestablish a connection.1 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch Special Device to select the spe-cial device.#Bluetooth devices that are difficult to establisha connection with are called special devices. Ifyour Bluetooth device is listed as a special device,select the appropriate one.3 Touch the special device list to open theconnection.This unit is now on standby for a connectionwith the Bluetooth device.#If five devices are already paired,Memory Full is displayed and pairing cannot beperformed. In such cases, delete a paired devicefirst. Refer to Deleting a paired device. on thispage.4 Use your Bluetooth device to establisha connection.The connection method is different dependingon the Bluetooth device. Refer to the manualfor your Bluetooth device to establish a con-nection.While connecting, Pair your phone is dis-played. If the connection is established,Paired is displayed.#If the connection fails, Connection Error isdisplayed. In such cases, try again from the be-ginning.#The PIN code is set to 0000 as the default, butcan be changed. Refer to Entering PIN code forBluetooth wireless connection on the nextpage.Connecting to a Bluetoothdevice automatically(Function of AVH-P5200BT)If this function is set to on, a connection be-tween your Bluetooth device and this unit willtake place automatically as soon as the twodevices are less than a few meters apart.Initially, this function is set to on.1 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch Auto Connect to turn automaticconnection on.If your Bluetooth device is ready for a Blue-tooth wireless connection, a connection tothis unit will automatically be established.#To turn automatic connection off, touchAuto Connect again.3 Turn your vehicle's ACC switch off andon.Switching visible unit(Function of AVH-P5200BT)This function sets whether or not to make thisunit visible to the other device.Initially, this function is set to on.1 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.<CRB3314-A/N>51En 51Section13Detailed instructionsDetailed instructions
2 Touch Visibility to select visibility off.!To turn visibility on, touch Visibilityagain.Displaying BD (BluetoothDevice) address(Function of AVH-P5200BT)This unit displays its BD address.1 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch Bluetooth Version to select de-vice information.The BD address is displayed.Entering PIN code forBluetooth wireless connection(Function of AVH-P5200BT)To connect your Bluetooth device to this unitvia Bluetooth wireless technology, you need toenter a PIN code on your Bluetooth device toverify the connection. The default code is0000, but you can change it with this function.1 Display the Bluetooth ConnectionMenu.Refer to Introduction of Bluetooth telephone op-erations on page 25.2 Touch PIN Code Input to selectPIN code input.3 Touch 1 to 0 to input pin code.4 After inputting PIN code (up to 8 di-gits), store in this unit.Storing the PIN code in this unit.Using a cellular phone toinitiate a connection(Function of AVH-P5200DVD)A Bluetooth wireless connection can be estab-lished from your phone by putting the unit intoinitiating a connection mode.You may need to refer to the operation manualthat came with your phone if you are unsurehow to initiate a connection from your phone.1 Put the unit in initiating a connectionmode.Refer to Introduction of Bluetooth telephone op-erations on page 30.2 Use a cellular phone to connect to thisunit.#Operation varies depending on the type of cel-lular phone.#You may need to enter the link code on yourcellular phone to complete the connection.Registering a connectedcellular phone(Function of AVH-P5200BT)You can register a phone that is temporarilyconnected to this unit in order to take full ad-vantage of the features available with Blue-tooth wireless technology. Only one cellularphone can be registered.1 Start registering a connected cellularphone.Refer to Introduction of Bluetooth telephone op-erations on page 30.2 Use cellular phone to register to thisunit.If registration is successful, the device nameof the connected phone is displayed in the se-lected assignment.#If the assignment is already taken, the devicename will be displayed. To replace an assignmentwith a new phone, first delete the current assign-ment.<CRB3314-A/N>52En52Section13 Detailed instructions
#If registration failed, the device name of theconnected phone will not be displayed in the se-lected assignment. In such cases, return to step1 and try again.Voice recognition(Function of AVH-P5200DVD)If your cellular phone features voice recogni-tion technology, you can make a call by voicecommands.!Operation varies depending on the type ofcellular phone. Refer to the instructionmanual that came with your cellular phonefor detailed instructions.1 Start voice recognition.Refer to Introduction of Bluetooth telephone op-erations on page 30.2 Say the name of your contact aloud.Connecting a Bluetoothaudio player(Function of AVH-P5200DVD)A Bluetooth wireless connection can be estab-lished by putting the unit into initiating a con-nection mode.%Put the unit in initiating a connectionmode.Refer to Bluetooth audio operations on page31.This unit is now on standby for connectionfrom Bluetooth audio player.If your Bluetooth audio player is set ready forBluetooth wireless connection, connection tothis unit is automatically established.Connecting to a Bluetoothdevice automatically(Function of AVH-P5200DVD)If this function is set to on, a connection be-tween your Bluetooth device and this unit willtake place automatically as soon as the twodevices are less than a few meters apart.Initially, this function is set to on.1 Touch Auto Connect to turn automaticconnection on.Refer to Introduction of Bluetooth telephone op-erations on page 30.If your Bluetooth device is ready for a Blue-tooth wireless connection, a connection tothis unit will automatically be established.#To turn automatic connection off, touchAuto Connect again.2 Turn your vehicle's ACC switch off andon.Displaying BD (BluetoothDevice) address(Function of AVH-P5200DVD)This unit displays its BD address.%Touch Bluetooth Version to select de-vice information.Refer to Introduction of Bluetooth telephone op-erations on page 30.The BD address is displayed.<CRB3314-A/N>53En 53Section13Detailed instructionsDetailed instructions
Introduction of menuoperationsAudioFader/BalanceF/R 0 L/R 0Super BassOnHighOffL/R:0Graphic EQAuto EQSonic Center ControlLoudnessSubwoofer55544433322211 Display menus.Refer to Common operations for menu set-tings/lists on page 13.2 Touch any of the following touch panelkeys to select the menu to be adjusted.1Touch panel keys1Video Setup MenuRefer to Setting up the DVDplayer on page 58.2Audio function menuRefer to Audio Adjustments onthe next page.3System menuRefer to System settings onpage 62.4Entertainment menuRefer to Entertainment settingson page 67.5Custom menuYou can choose menus withineach menu (Audio functionmenu, etc.) and register themto this custom menu.Refer to Customizing menuson page 68.Notes!You can display the Video setup menu whenaDisc,USB or SD source is selected.!If you start the Video setup menu, playbackis stopped.!You cannot display the Audio/DSP functionmenu when the mute function is on or a JPEGfile is playing.<CRB3314-A/N>54En54Section14 Menu operations
Audio AdjustmentsNotes!When selecting FM as the source, you cannotswitch to Source Level Adjuster.!When selecting Bluetooth telephone as thesource, you can not use this function.Using fader/balance adjustmentYou can change the fader/balance setting toprovide an ideal listening environment for allof the occupied seats.1 Display the audio function menu.Refer to Introduction of menu operations onthe previous page.2 Touch Fader/Balance on the audio func-tion menu.3 Touch aor bto adjust the front/rearspeaker balance.Range: Front:15 to Rear:15#Select F/R: 0 L/R: 0 when only using twospeakers.#The front/rear speaker balance cannot be ad-justed when the rear output setting isSubwoofer. Refer to Setting the rear output andsubwoofer controller on page 62.4 Touch cor dto adjust the left/rightspeaker balance.Range: Left:15 to Right:15Using the equalizerYou can adjust the equalization to match thecar’s interior acoustic characteristics as de-sired.Recalling equalizer curvesThere are seven stored equalizer curves whichyou can easily recall at any time. Here is a listof the equalizer curves.Display Equalizer curvePowerful PowerfulNatural NaturalVocal VocalCustom1 Custom 1Custom2 Custom 2Flat FlatSuper Bass Super bass!The equalizer curves for Custom1 andCustom2 can be adjusted.!You cannot select Custom1 and Custom2when using the auto-equalizer.!When Flat, no changes are made to thesound. You can check the effects of theequalizer curves by switching alternativelybetween Flat and another equalizer curve.1 Display the audio function menu.Refer to Introduction of menu operations onthe previous page.2 Touch Graphic EQ on the audio functionmenu.#You can select Graphic EQ when Auto EQfunction is off.3 Touch cor dto select the desired item.Powerful—Natural—Vocal—Custom1—Custom2—Flat—Super BassAdjusting the 8-band graphic equalizerYou can adjust the level of each band for theequalizer curves.!A separate Custom1 curve can be createdfor each source. If you make adjustmentswhen a curve other than Custom2 is se-lected, the equalizer curve settings will bestored in Custom1.!ACustom2 curve that is common for allsources can be created. If you make adjust-ments when the Custom2 curve is se-lected, the Custom2 curve will be updated.<CRB3314-A/N>55En 55Section14Menu operationsMenu operations
1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Graphic EQ on the audio functionmenu.3 Touch cor dto select the desired item.Powerful—Natural—Vocal—Custom1—Custom2—Flat—Super Bass4 Touch the Equalizer band to adjust.5 Touch aor bto adjust the level of theequalizer band.Range: +12dB to -12dB#You can then select another band and adjustthe level.Using the auto-equalizerThe auto-equalizer is an equalizer curve cre-ated by auto EQ (refer to Auto EQ (auto-equaliz-ing) on page 65).You can turn the auto-equalizer on or off.If you connect an optional microphone to thisunit, you can use this function.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Auto EQ to turn the auto-equali-zer on or off.#You cannot use this function if auto EQ hasnot been carried out.Using sonic center controlSound that is suited for the listening positioncan easily be created with this function.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Sonic Center Control on theaudio function menu.3 Touch cor dto select a listening posi-tion.Range: Left:7 to Right:7Adjusting loudnessLoudness compensates for deficiencies in thelow- and high-frequency ranges at low volume.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Loudness on the audio functionmenu.3 Touch cor dto select a desired level.Off (off)—Low (low)—Mid (mid)—High(high)Using subwoofer outputThis unit is equipped with a subwoofer outputwhich can be turned on or off.!The cut-off frequency and output level canbe adjusted when the subwoofer output ison.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Subwoofer on the audio functionmenu.3 Touch On or Off next to Subwoofer toturn the subwoofer output on or off.4 Touch Normal or Reverse next to Phaseto select the phase of subwoofer output.5 Touch cor dnext to Level to adjustthe output level of the subwoofer.Range: +6 to -246 Touch cor dnext to Frequency to se-lect the cut-off frequency.50Hz—63Hz—80Hz—100Hz—125Hz<CRB3314-A/N>56En56Section14 Menu operations
Only frequencies lower than those in the se-lected range are outputted from the subwoo-fer.Boosting the bassYou can boost the bass level.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch Bass Booster on the audio func-tion menu.3 Touch cor dto select a desired level.Range: 0to +6Using the high pass filterWhen you do not want low sounds from thesubwoofer output frequency range to playfrom the front or rear speakers, turn on theHPF (high pass filter). Only frequencies higherthan those in the selected range are outputfrom the front or rear speakers.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Touch High Pass Filter on the audiofunction menu.3 Touch cor dnext to Frequency to se-lect cut-off frequency.Off (off)—50Hz—63Hz—80Hz—100Hz—125HzOnly frequencies higher than those in the se-lected range are output from the front or rearspeakers.Adjusting source levelsWith SLA (source level adjustment), the vo-lume levels of each source can be adjusted toprevent significant differences betweensources.!Settings are based on the FM volume level,which remains unchanged.1 Display the audio function menu.Refer to Introduction of menu operations onpage 54.2 Compare the FM volume level with thelevel of the source you wish to adjust.3 Touch Source Level Adjuster on theaudio function menu.4 Touch aor bto adjust the source vo-lume.Range: +4 to –4Notes!The AM volume level can also be adjustedwith this function.!Video CD, CD, compressed audio and DivXare automatically set to the same source leveladjustment volume.!iPod and USB storage device are automati-cally set to the same source level adjustmentvolume.!External unit 1 and external unit 2 are automa-tically set to the same source level adjustmentvolume.<CRB3314-A/N>57En 57Section14Menu operationsMenu operations
Setting up the DVD playerSetting the subtitle languageYou can set a desired subtitle language. Whenavailable, the subtitles will be displayed in theselected language.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Subtitle Language on the VideoSetup menu.A subtitle language menu is displayed.3 Touch the desired language.The subtitle language is set.#If you have selected Others, refer to When youselect Others on this page.Notes!If the selected language is not available, thelanguage specified on the disc is displayed.!You can also switch the subtitle language bytouching the icon during playback. (Refer toPlaying moving images on page 17.)!The setting made here will not be affectedeven if the subtitle language is switched dur-ing playback using Subtitle.When you select OthersA language code input display is shown whenOthers is selected. Refer to Language codechart for DVD on page 89.1 Touch 0 to 9 to input the languagecode.#To cancel the entered numbers, touch C.2 Registering the code.Registering the code.Setting the audio languageYou can set the preferred audio language.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Audio Language on the VideoSetup menu.An audio language menu is displayed.3 Touch the desired language.The audio language is set.#If you have selected Others, refer to When youselect Others on this page.Notes!If the selected language is not available, thelanguage specified on the disc is used.!You can also switch the audio language bytouching Audio during playback. (Refer toPlaying moving images on page 17.)!The setting made here will not be affectedeven if the audio language is switched duringplayback using Audio.Setting the menu languageYou can set the preferred language in whichthe menus recorded on a disc are displayed.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Menu Language on the VideoSetup menu.A menu language menu is displayed.3 Touch the desired language.The menu language is set.#If you have selected Others, refer to When youselect Others on this page.NoteIf the selected language is not available, the lan-guage specified on the disc is displayed.<CRB3314-A/N>58En58Section14 Menu operations
Setting the multi-angle DVDdisplayThe angle icon can be set so it appears onscenes where the angle can be switched.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Multi Angle on the Video Setupmenu to turn angle icon display on or off.Setting the aspect ratioThere are two kinds of display: a wide screendisplay that has a width-to-height ratio (TV as-pect ratio) of 16:9, and regular display that hasa TV aspect of 4:3. Be sure to select the correctTV aspect for the display connected to REARMONITOR OUTPUT.!When using regular display, select eitherLetter Box or Pan Scan. Selecting 16 : 9may result in an unnatural picture.!If you select the TV aspect ratio, the unit’sdisplay will change to the same setting.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch TV Aspect on the Video Setupmenu to select the TV aspect ratio.Touch TV Aspect repeatedly until the desiredaspect ratio appears.!16 : 9 –Wide screen picture (16:9) is dis-played as is (initial setting)!Letter Box –The picture is the shape of aletterbox with black bands on the top andbottom of the screen!Pan Scan –The picture is cut short on theright and left sides of the screenNotes!When playing discs that do not specifyPan Scan, the disc is played back inLetter Box display even if you select thePan Scan setting. Confirm whether the discpackage bears the 16 : 9 LB mark.!The TV aspect ratio cannot be changed forsome discs. For details, refer to the disc’s in-structions.Setting the slide show intervalJPEG files can be viewed as a slide show onthis unit. In this setting, the interval betweeneach image can be set.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Slide Show on the Video Setupmenu to select the slide show interval.Touch Slide Show repeatedly until the desiredsetting appears.!5sec –JPEG images switch at intervals of 5seconds!10sec –JPEG images switch at intervals of10 seconds!15sec –JPEG images switch at intervals of15 seconds!Manual –JPEG images can be switchedmanuallySetting parental lockSome DVD video discs let you use parentallock to restrict children from viewing violentand adult-oriented scenes. You can set paren-tal lock to the desired level.!When you have a parental lock level setand play a disc featuring parental lock,code number input indications may be dis-played. In such cases, playback will beginwhen the correct code number is entered.<CRB3314-A/N>59En 59Section14Menu operationsMenu operations
Setting the code number and levelA code number must be registered in order toplay back discs with parental lock.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Parental on the Video Setupmenu.3 Touch 0 to 9 to input a four digit codenumber.#To cancel the entered numbers, touch C.4 Registering the code.Registering the code.The code number is set, and the level can nowbe set.5 Touch 1 to 8 to select the desired level.6 Touch Enter.The parental lock level is set.!8–Playback of the entire disc is possible(initial setting)!7to 2–Playback of discs for children andnon-adult-oriented discs is possible!1–Playback of discs for children only ispossibleNotes!We recommend to keep a record of your codenumber in case you forget it.!The parental lock level is stored on the disc.Look for the level indication written on thedisc package, included literature or on thedisc itself. Parental lock of this unit is not pos-sible if a parental lock level is not stored onthe disc.!With some discs, the parental lock may be ac-tive only for certain levels of scenes. The play-back of those scenes will be skipped. Fordetails, refer to the instruction manual thatcame with the disc.Changing the levelYou can change the set parental lock level.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch Parental on the Video Setupmenu.3 Touch 0 to 9 to input the registeredcode number.4 Registering the code.Registering the code.This sets the code number, and the level cannow be changed.#If you enter an incorrect code number, theicon is displayed. Touch Cand enter the correctcode number.#If you forget your code number, refer to If youforget your code number on this page.5 Touch 1 to 8 to select the desired level.6 Touch Enter.The new parental lock level is set.If you forget your code numberPress RESET.Setting the DivX subtitle fileYou can select whether or not to display DivXexternal subtitles.!The DivX subtitles will be displayed evenwhen Custom is selected if no DivX exter-nal subtitle files exist.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.<CRB3314-A/N>60En60Section14 Menu operations
2 Touch DivX Subtitle on the Video Setupmenu to select the desired subtitle setting.!Original –Display the DivX subtitles!Custom –Display the DivX external subti-tlesNotes!Up to 42 characters can be displayed on oneline. If more than 42 characters are set, theline breaks and the characters are displayedon the next line.!Up to 126 characters can be displayed on onescreen. If more than 126 characters are set,the excess characters will not be displayed.Displaying the DivXÒVODregistration codeIn order to play DivX VOD (video on demand)content on this unit, the unit must first be re-gistered with a DivX VOD content provider. Forregistration, generate a DivX VOD registrationcode and submit it to your provider.!Keep a record of the code as you will needit when you register your unit to the DivXVOD provider.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch DivX VOD on the Video Setupmenu.Registration Code and Deactivation Codeappear.3 Touch Registration Code.Your registration code is displayed.Displaying the deactivation codeIf your device is already activated, deactivate itby entering the deactivation code.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch DivX VOD on the Video Setupmenu.3 Touch Deactivation Code.#To cancel deactivation, touch Cancel.4 Touch OK.The deactivation completed.Automatic playback of DVDsWhen a DVD disc with a DVD menu is in-serted, this unit will cancel the menu automa-tically and start playback from the first chapterof the first title.!Some DVDs may not operate properly. Ifthis function is not fully operated, turn thisfunction off and start playback.1 Display the Video Setup Menu.Refer to Introduction of menu operations onpage 54.2 Touch DVD Auto Play to turn automaticplayback on.#To turn automatic playback off, touchDVD Auto Play again.<CRB3314-A/N>61En 61Section14Menu operationsMenu operations
System settingsSwitching the auxiliary settingActivate this setting when using an auxiliarydevice connected to this unit.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch AUX Input on the system menuto turn AUX Input on or off.Setting AV inputActivate this setting when using an externalvideo component connected to this unit.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch AV Input on the system menu toturn AV Input on or off.Setting the rear output andsubwoofer controllerThis unit’s rear output (rear speaker leads out-put and RCA rear output) can be used for full-range speaker (Full) or subwoofer(Subwoofer) connection. If you switch therear output setting to Subwoofer, you canconnect a rear speaker lead directly to a sub-woofer without using an auxiliary amp.Initially, the unit is set for a rear full-rangespeaker connection (Full).1 Turn the unit off.Refer to Basic Operations on page 11.2 Display the system menu.Refer to Introduction of menu operations onpage 54.3 Touch Rear Speaker on the systemmenu to switch the subwoofer output orfull-range speaker.#When no subwoofer is connected to the rearoutput, select Full (full-range speaker).#When a subwoofer is connected to the rearoutput, select Subwoofer (subwoofer).#When the rear output setting is Subwoofer,you cannot operate the following procedure.Notes!Even if you change this setting, there is nooutput unless you turn the subwoofer outputon (refer to Using subwoofer output on page56).!If you change this setting, subwoofer outputin the audio menu will return to the factorysettings.!Both rear speaker lead outputs and RCA rearoutput are switched simultaneously in thissetting.Switching sound muting/attenuationSound from this system is automaticallymuted or attenuated when a signal fromequipment with a mute function is received.!Sound from this system returns to normalwhen the muting or attenuation is can-celed.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch Mute/ATT until the desired set-ting appears.Touch Mute/ATT until the desired setting ap-pears in the display.!Mute –Muting!ATT -20dB –Attenuation (ATT -20dB has astronger effect than ATT -10dB)!ATT -10dB –Attenuation!Off –Turns the sound muting/attenuationoff<CRB3314-A/N>62En62Section14 Menu operations
Notes!When Mute is displayed, the sound is turnedoff and no audio adjustments can be made.!When ATT is displayed, the sound is attenu-ated and only the volume can be adjusted.(No other audio adjustments can be made.)!Operation returns to normal when the phoneconnection is ended.Changing languages for CAUTIONSome operations on this unit are prohibitedwhile driving or needs to be paid a careful at-tention when operating. In such case, a cau-tion appears on the display. You can changethe language of the cautions at this setting.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch Caution Language to select yourdesired language.3 Touch any of the following touch panelkeys to select the Caution Language.!English —English!Español —Spanish!Français —FrenchSelecting the menu languageThe menu language can be selected from fourlanguages.If text information such as the title name, artistname or a comment is embedded in a Eur-opean language or Russian, they can also bedisplayed on this unit.!The language can be changed for the fol-lowing:—System menu—Video Setup—On-screen display—Multi language setting for DivX!If the embedded language and the selectedlanguage setting are not the same, text in-formation may not be displayed properly.!Some characters may not be displayedproperly.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch System Language on the systemmenu to select the desired language.3 Touch the desired language.English (English)—Español (Spanish)—Português (Portuguese)—Русский (Russian)Clearing Bluetooth memory(AVH-P5200BT only)ImportantNever turn the unit off while the Bluetooth mem-ory is being cleared.1 Turn the unit off.Refer to Basic Operations on page 11.2 Display the system menu.Refer to Introduction of menu operations onpage 54.3 Touch Bluetooth Memory Clear on thesystem menu.4 Touch Clear.After selecting a desired item, a confirmationdisplay appears. Touch OK to delete the mem-ory.#If you do not want to clear the selected mem-ory, touch Cancel.Updating Bluetooth connectionsoftware(AVH-P5200BT only)This function is used to update this unit withthe latest software. For information on the soft-ware and updating, refer to our website.<CRB3314-A/N>63En 63Section14Menu operationsMenu operations
ImportantNever turn the unit off and never disconnect thephone while the software is being updated.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch Bluetooth Software Update.3 Touch Start to display the data transfermode.#Follow the on-screen instructions to finish up-dating the software.Displaying the Bluetoothsystem version(AVH-P5200BT only)If this unit fails to operate properly, you mayneed to consult your dealer for repair. In suchcases, you may be asked to specify the systemversion. Perform the following procedure tocheck the version on this unit.1 Turn the unit off.Refer to Basic Operations on page 11.2 Display the system menu.Refer to Introduction of menu operations onpage 54.3 Touch Bluetooth Version Information todisplay to the version of the Bluetoothmodule of this unit.Adjusting the LCD panel slidepositionYou can adjust the LCD panel slide position sothat the panel is set back or forward.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch Flap Set Back.3 Touching the Flap Set Back keys allowsyou to move the LCD panel back and forth.The LCD panel slides to the back.The LCD panel slides to the front.Setting the automatic openfunctionTo prevent the display from hitting the shiftlever of an automatic vehicle when it is in theP(park) position, or when you do not wish thedisplay to open/close automatically, you canset the automatic open function to manualmode.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch AUTO FLAP to select whether toopen/close the display automatically ormanually.Each time you touch AUTO FLAP the settingswitches between:!ON –The LCD panel will open or close auto-matically when the ignition switch is turnedon or off.!OFF –You have to press OPEN/CLOSE toopen/close the LCD panel.Switching the warning toneIf the front panel is not detached from thehead unit within four seconds of turning offthe ignition, a warning tone sounds. You canturn off the warning tone.1 Display the system menu.Refer to Introduction of menu operations onpage 54.<CRB3314-A/N>64En64Section14 Menu operations
2 Touch DT.WARNING to turn the warn-ing tone on.#To turn the warning tone off, touchDT.WARNING again.Setting the rear view camera(back up camera)CAUTIONPioneer recommends the use of a camerawhich outputs mirror-reversed images.Otherwise, the screen image will appear re-versed.This unit features a function that automaticallyswitches to the rear view camera video (REARVIEW CAMERA IN) when a rear view camerais installed on your car and the gear shift ismoved to the REVERSE (R) position.(Formore details, consult your dealer.)!After you set up the rear view camera set-ting, move the gear shift to REVERSE (R)and confirm that the rear view cameravideo is shown on the display.!Change this setting if the display switchesto the rear view camera video by error whileyou are driving forward.!To stop watching the rear view cameravideo and return to the source display,press and hold MENU/.!Touch the RearView source icon to displaythe rear view camera image while driving.Touch the source icon again to turn therear view camera off. For details, refer to Se-lecting a source using the touch panel keyson page 11.1 Display the system menu.Refer to Introduction of menu operations onpage 54.2 Touch Camera Polarity on the systemmenu to select the appropriate setting.!Battery –When the polarity of the con-nected lead is positive while the gear shiftis in REVERSE (R) position!Ground –When the polarity of the con-nected lead is negative while the gear shiftis in REVERSE (R) position!Off –When a rear view camera is not con-nected to this unitAuto EQ (auto-equalizing)The auto-equalizer automatically measuresthe car’s interior acoustic characteristics, andthen creates an auto-equalizer curve based onthat information.WARNINGAs a loud tone (noise) may be emitted from thespeakers when measuring the car's interioracoustic characteristics, never perform auto EQwhile driving.CAUTION!Thoroughly check the conditions before per-forming auto EQ as the speakers may be da-maged if these functions are performed when:—The speakers are incorrectly connected.(For example, when a rear speaker is con-nected as a subwoofer output.)—A speaker is connected to a power amp de-livering output higher than the speaker’smaximum input power capability.!If the microphone is placed in an unsuitableposition the measurement tone may becomeloud and measurement may take a long time,resulting in battery drainage. Be sure to placethe microphone in the specified location.<CRB3314-A/N>65En 65Section14Menu operationsMenu operations
Before operating the auto EQ function!Carry out auto EQ in as quiet a place aspossible, with the car engine and air condi-tioning switched off. Also cut power to carphones or portable telephones in the car, orremove them from the car before carryingout auto EQ. Sounds other than the mea-surement tone (surrounding sounds, en-gine sound, telephones ringing etc.) mayprevent correct measurement of the car in-terior acoustic characteristics.!Be sure to carry out auto EQ using the op-tional microphone. Using another micro-phone may prevent measurement, or resultin incorrect measurement of the car inter-ior acoustic characteristics.!In order to perform auto EQ, the frontspeaker must be connected.!When this unit is connected to a poweramp with input level control, auto EQ maynot be possible if the power amp’s inputlevel is set below the standard level.!When this unit is connected to a poweramp with an LPF, turn this LPF off beforeperforming auto EQ. Also set the cut-off fre-quency for the built-in LPF of an active sub-woofer to the highest frequency.!The distance has been calculated by com-puter to be the optimum delay to give accu-rate results for the circumstances, soplease continue to use this value.—The reflected sound within the car isstrong and delays occur.—The LPF on active subwoofers or exter-nal amps delay the lower sounds.!Auto EQ changes the audio settings as fol-lows:—The fader/balance settings return to thecenter position. (Refer to Using fader/balance adjustment on page 55.)—The equalizer curve switches to Flat.(Refer to page 55.)—The front, center and rear speakers willautomatically be adjusted to a highpass filter setting.!Previous settings for auto EQ will be over-written.Performing auto EQ1 Stop the car in a place that is quiet,close all the doors, windows and sun roof,and then turn the engine off.If the engine is left running, engine noise mayprevent correct auto EQ.2 Fix the optional microphone in the cen-ter of the headrest of the driver’s seat, fa-cing forward.The auto EQ may differ depending on whereyou place the microphone. If desired, placethe microphone on the front passenger seat tocarry out auto EQ.3 Turn the ignition switch to ON or ACC.If the car’s air conditioner or heater is turnedon, turn it off. Noise from the fan in the airconditioner or heater may prevent correct autoEQ.4 Display the system menu.Refer to Introduction of menu operations onpage 54.5 Touch Auto EQ Measurement to enterauto EQ measurement mode.6 Plug the microphone into the micro-phone input jack on this unit.<CRB3314-A/N>66En66Section14 Menu operations
7 Touch Start to start auto EQ.8 When the 10-second countdown starts,get out of the car and close the door within10 seconds.A measurement tone (noise) is emitted fromthe speakers, and auto EQ measurement be-gins.When auto EQ is completed, Complete is dis-played.When the car’s interior acoustic characteris-tics cannot be measured correctly, an errormessage will be displayed. (Refer to Under-standing auto EQ error messages on page 77.)#It takes about nine minutes for auto EQ mea-surement to be completed when all the speakersare connected.#To stop auto EQ, touch Stop.#To cancel auto EQ measurement mode duringthis procedure, touch the following touch panelkey.Canceling auto EQ measurementmode.9 Store the microphone carefully in theglove compartment or another safe place.If the microphone is subjected to direct sun-light for an extended period, high tempera-tures may cause distortion, color change ormalfunction.Note(AVH-P5200DVD)Do not press h(eject) to open or close the panelwhen you are using the microphone.Entertainment settingsSelecting the illumination colorThis unit is equipped with multiple-color illu-mination.Direct selection from presetillumination colorsYou can select an illumination color from thecolor list.1 Display the entertainment menu.Refer to Introduction of menu operations onpage 54.2 Touch Appearance.3 Touch Illumination and then touch acolor on the list.Customizing the illumination color1 Display the entertainment menu.Refer to Introduction of menu operations onpage 54.2 Touch Appearance.3 Touch Illumination and then touchCustom.4 Display the customizing menu.Displaying the customizing menu.5 Touch the color bar to customize thecolor.6 Touch cor dto fine-tune the color.7 Touch the icon and hold to store thecustomized color in the memory.MemoStoring the customized color inthe memory.<CRB3314-A/N>67En 67Section14Menu operationsMenu operations
The customized color has been stored in thememory.The set color will be recalled from the memorythe next time you touch the same icon.Selecting the OSD colorThe OSD color can be changed.1 Display the entertainment menu.Refer to Introduction of menu operations onpage 54.2 Touch Appearance.3 Touch Screen.4 Touch one of the colors on the list.Selecting the background displayYou can switch the background that is dis-played when listening to a source.1 Display the entertainment menu.Refer to Introduction of menu operations onpage 54.2 Touch Background.3 Touch the desired setting.#If no JPEG images are stored in this unit, youcannot select photo. To store a JPEG image tothis unit, refer to Capture an image in JPEG fileson page 41.Customizing menus1 Display menu columns to register.Refer to Introduction of menu operations onpage 54.2 Touch and hold the menu column toregister it.#To cancel registration, touch and hold themenu column again.3 Display the custom menu and choose aregistered menu.Refer to Introduction of menu operations onpage 54.NoteYou can register up to 12 columns.<CRB3314-A/N>68En68Section14 Menu operations
Changing the pictureadjustmentYou can adjust the Brightness (brightness),Contrast (contrast), Color (color) ,Hue (hue),Dimmer (dimmer), Temperature (tempera-ture), Black Level (black level) andRGB Dot ADJ (RGB dot clock adjustment) foreach source and rear view camera.!You cannot adjust Color,Hue,Contrastand Black Level for the audio source.1 Press and hold MENU to displayPicture Adjustment.The adjustment function names are displayed.2 If you are adjusting thePicture Adjustment, select the unit.NAVI Adjusting the Picture Adjustmentfor the Navigation unit.RearView Adjusting the Picture Adjustmentfor the rear view camera.Source Adjusting the Picture Adjustmentfor the source.3 Touch any of the following touch panelkeys to select the function to be adjusted.Picture Adjustment items are displayed.!Brightness –Adjusts the black intensity!Contrast –Adjusts the contrast!Color –Adjusts the color saturation!Hue –Adjusts the tone of color (red orgreen is emphasized)!Dimmer –Adjusts the brightness of the dis-play!Temperature –Adjusts the color tempera-ture, resulting in a better white balance!Black Level –Emphasizes the dark portionsof images making the difference betweenbright and dark more distinct!RGB Dot ADJ –Adjusts phase shifting bydot clock when a Navigation unit is con-nected#You cannot adjust the picture adjustment forthe rear view camera when Camera Polarity isset to Off. (Refer to Setting the rear view camera(back up camera) on page 65.)#If the color system is set to PAL/PAL-M/SECAM, you cannot adjust Hue.#With some rear view cameras, picture adjust-ment may not be possible.4 Touch cor dto adjust the selecteditem.Each time you touch cor d, the level of theselected item increases or decreases.#Dimmer can be adjusted from +1 to +48.#Temperature can be adjusted from +3 to –3.5 Touch Black Level and RGB Dot ADJ toadjust.#Black Level can be set on or off.#RGB Dot ADJ can be set to 1or 2.Notes!You cannot operate this function while driving.!Different Brightness/Contrast/Dimmer set-tings can be set for when the illuminationswitch is on and when it is off.Setting rear monitor outputThe output source for the rear monitor can beswitched to the following:!Front –The source on the front screen ofthis unitDisc –The video and sound from the DVDAV –The video and sound from AV inputAUX–The source for AUX inputOff–No sourceNoteYou cannot play DivX files on the rear and frontmonitors at the same time.<CRB3314-A/N>69En 69Section15Other FunctionsOther Functions
Adjusting the responsepositions of the touch panels(Touch Panel Calibration)If you feel that the touch panel keys on thescreen deviate from the actual positions thatrespond to your touch, adjust the response po-sitions of the touch panel. There are two ad-justment methods: 4-point adjustment, inwhich you touch four corners of the screen;and 16-point adjustment, in which you makefine-adjustments on the entire screen.!Touch the screen gently for adjustment.Forcefully pressing the touch panel may da-mage the touch panel. Do not use a sharppointed tool such as a ballpoint pen or me-chanical pen. Doing so may damage thescreen.!If the touch panel cannot be adjusted prop-erly, consult your local Pioneer dealer.1 Turn the unit off.Refer to Basic Operations on page 11.2 Press and hold MENU to displayPicture Adjustment.3 Press and hold MENU to start TouchPanel Calibration.The 4-point touch panel adjustment screen ap-pears.4 Touch each of the arrows on the fourcorners of the screen.#To cancel the adjustment, press and holdMENU.5 Press MENU to complete 4-point adjust-ment.Data for the adjusted position is saved.#Do not turn off the engine while the data isbeing saved.6 Press MENU to proceed to 16-point ad-justment.The 16-point touch panel adjustment screenappears.#To cancel the adjustment, press and holdMENU.7 Gently touch the center of the + markdisplayed on the screen.After you touch all the marks, the data for theadjusted position is saved.#Do not turn off the engine while the data isbeing saved.8 Press and hold MENU to complete theadjustment.Using an AUX sourceA separately sold auxiliary device such as aVCR or portable device can be connected tothis unit. When connected, the auxiliary deviceis automatically recognized as an AUX sourceand is assigned to AUX.About AUX connection methodsThere are two methods to connect auxiliary de-vices to this unit.Mini pin plug cable (AUX)When connecting an auxiliary device using amini plug cableiPods and portable audio/video players can beconnected to this unit via mini plug cable.!If an iPod with video capabilities is con-nected to this unit via 3.5mm plug (4 pole)cable (such as the CD-V150M), you canenjoy the video contents of the connectediPod.!A portable audio/video player can be con-nected by using a 3.5mm plug (4 pole) withan RCA cable (sold separately). However,depending on the cable, a reverse connec-tion between the red (right side audio)cable and yellow (video) cable may be re-quired in order for the sound and videoimage to be reproduced correctly.<CRB3314-A/N>70En70Section15 Other Functions
%Insert the stereo mini plug into theAUX input jack on this unit.For more details, refer to What’s what on page10.Using an external unitAn external unit refers to a Pioneer product,such as those which will be available in the fu-ture. Although incompatible as a source, thebasic functions of up to two external units canbe controlled with this unit. When two externalunits are connected, the external units areautomatically allocated to external unit 1 or ex-ternal unit 2.The basic operations of the external unit areexplained below. The allocated functions willdiffer depending on the connected externalunit. For details concerning these functions,refer to the owner’s manual for the externalunit.Basic operationsThe functions allocated to the following opera-tions will differ depending on the connectedexternal unit. For details concerning thesefunctions, refer to the owner’s manual for theconnected external unit.Auto Switching to auto or manual.AudioVideoSwitching to video and audio.Changing the screen mode.Refer to Changing the wide screenmode on page 41.Switching the equalizer curves.Refer to Using the equalizer onpage 55.Touch and hold for more than twoseconds to turn the auto-equalizeron or off.Refer to Using the auto-equalizeron page 56.Actions will differ depending onthe connected external unit.Actions will differ depending onthe connected external unit.F1F2F3F4Function 1 to 4Actions will differ depending onthe connected external unit.Using the functions allocated to 1to 6 keys.Actions will differ depending onthe connected external unit.<CRB3314-A/N>71En 71Section15Other FunctionsOther Functions
TroubleshootingCommonSymptom Cause Action (Refer-ence page)The power willnot turn on.The unit willnot operate.Leads and con-nectors are incor-rectly connected.Confirm once morethat all connec-tions are correct.The fuse isblown.Rectify the causeand then replacethe fuse. Be sure toinstall a fuse withthe same rating.Noise and/orother factors arecausing the built-in microproces-sor to operate in-correctly.Press RESET.(Page10)Operation withthe remotecontrol is notpossible.The unit doesnot operatecorrectly evenwhen the ap-propriate re-mote controlbuttons arepressed.Battery power islow.Load a new battery.Some operationsare prohibitedwith certaindiscs.Try operating withanother disc.Playback is notpossible.The disc is dirty. Clean the disc.(Page 82)The type of discloaded cannot beplayed on thisunit.Check the disctype.The disc loadedis not compatiblewith this videosystem.Change the disc toone that is compa-tible with yourvideo system.There is nosound.The volumelevel will notrise.Cables are notconnected cor-rectly.Connect the cablescorrectly.The unit is per-forming still,slow motion orframe-by-frameplayback.There is no soundduring still, slowmotion or frame-by-frame playback.Symptom Cause Action (Refer-ence page)There is noimage dis-played.The parkingbrake cable isnot connected.Connect the park-ing brake cable,and apply the park-ing brake.The parkingbrake is not ap-plied.Connect the park-ing brake cable,and apply the park-ing brake.The icon isdisplayed, andoperation is notpossible.The operation isprohibited for thedisc.This operation isnot possible.The operation isnot compatiblewith the config-uration of thedisc.This operation isnot possible.The image dis-played stops(pauses) andthe unit cannotbe operated.The data couldno longer beread during play-back.Stop playbackonce, and startplayback again.There is nosound.The volumelevel is low.The volume levelis low.Adjust the volumelevel.The attenuator ison.Turn the attenuatoroff.The sound andvideo skip.The unit is notfirmly secured.Firmly secure theunit.File size andtransmission rateare above recom-mended rates.Create a DivX filethat is within therecommended sizeand transmissionrate.The aspectratio is incor-rect and theimage isstretched.The aspect ratiosetting is incor-rect for the dis-play.Select the appro-priate setting foryour display. (Page59)The motorsounds whenthe ignitionswitch isturned ON (oris turned toACC).The unit is con-firming whetheror not a disc isloaded.This is a normaloperation.<CRB3314-A/N>72En72AppendixAdditional Information
Symptom Cause Action (Refer-ence page)Nothing is dis-played.The touchpanel keys can-not be used.The rear viewcamera is notconnected.Camera Polarityis at incorrectsetting.Connect a rearview camera.Press and holdMENU to return tothe source displayand then select thecorrect setting forCamera Polarity.(Page 65)No xxxx ap-pears when adisplay is chan-ged (No Title,for example).There is no textinformation em-bedded.Switch the displayor play anothertrack/file.Sub-folderscannot beplayed back.Folder repeatplay has been se-lected.Select the repeatrange again.The repeatrange changesautomatically.Another folderwas selected dur-ing repeat play.Select the repeatrange again.Track search orfast forward/re-verse was per-formed duringfile repeat play.Select the repeatrange again.DVDSymptom Cause Action (Refer-ence page)Playback is notpossible.The loaded dischas a different re-gion numberfrom this unit.Replace the discwith one featuringthe same regionnumber as thisunit.A parental lockmessage is dis-played andplayback is notpossible.Parental lock isactivated.Turn parental lockoff or change thelevel. (Page 59)Parental lockcannot be can-celed.The code numberis incorrect.Enter the correctcode number.(Page 59)You have forgot-ten your codenumber.Press RESET.(Page60)Symptom Cause Action (Refer-ence page)Dialog lan-guage (andsubtitle lan-guage) cannotbe switched.The DVD beingplayed does notfeature multiplelanguage record-ings.The language can-not be switched ifthey are not re-corded on the disc.You can onlyswitch betweenitems indicatedin the disc menu.Switch the lan-guage using thedisc menu.No subtitlesare displayed.The DVD beingplayed does notfeature subtitles.Subtitles are notdisplayed if theyare not recordedon the disc.You can onlyswitch betweenitems indicatedin the disc menu.Switch the lan-guage using thedisc menu.Playback is notperformed withthe audio lan-guage and sub-title languagesettings se-lected in Videosetup menu.The DVD beingplayed does notfeature dialog orsubtitles in theselected lan-guage.The language can-not be switched ifthe selected lan-guage is not re-corded on the disc.The viewingangle cannotbe switched.The DVD beingplayed does notfeature scenesshot from multi-ple angles.The viewing anglecannot beswitched if theDVD does not fea-ture scenes re-corded frommultiple angles.You are trying toswitch to multi-angle viewing fora scene that wasnot recordedfrom multiple an-gles.Switch betweenmultiple angleswhen watchingscenes recordedfrom multiple an-gles.<CRB3314-A/N>73En 73AppendixAdditional InformationAdditional Information
Symptom Cause Action (Refer-ence page)The image isextremely un-clear/distortedand dark dur-ing playback.Some discs fea-ture a signal toprohibit copying.Since this unit iscompatible withthe analog copygeneration man-agement system,when playing adisc that has a sig-nal prohibitingcopying, horizontalstripes or other im-perfections mayappear whenviewed on somedisplays. This isnot a malfunction.Video CDSymptom Cause ActionThe PBC (play-back control)menu cannotbe called up.The Video CDbeing playeddoes not featurePBC.This operation isnot available forVideo CDs that donot feature PBC.Repeat playand track/timesearch are notpossible.The Video CDbeing played fea-tures PBC.This operation isnot available forVideo CDs that fea-ture PBC.iPodSymptom Cause ActionThe iPod doesnot operatecorrectly.The cables are in-correctly con-nected.Disconnect thecable from theiPod. Once theiPod's main menuis displayed, recon-nect the iPod andreset it.The iPod versionis old.Update the iPodversion.Bluetooth audio/telephoneSymptom Cause ActionThe soundfrom the Blue-tooth audiosource is notplayed back.There is a call inprogress on aBluetooth-con-nected cellularphone.The sound will beplayed back whenthe call is termi-nated.A Bluetooth-con-nected cellularphone is cur-rently being oper-ated.Do not operate thecellular phone atthis time.A call was madewith a Bluetooth-connected cellu-lar phone andthen immediatelyterminated. As aresult, communi-cation betweenthis unit and thecellular phonewas not termi-nated properly.Reconnect theBluetooth connec-tion between thisunit and the cellu-lar phone.Error messagesWhen you contact your dealer or your nearestPioneer Service Center, be sure to note theerror message.TunerMessage Cause ActionNo Data Pro-videdThis unit cannotreceive artistname/song titleinformation.Move to the desir-able location withgood reception.No Data This unit cannotreceive programservice name in-formation.Move to the desir-able location withgood reception.DVDMessage Cause ActionDifferent Re-gion DiscThe disc does nothave the sameregion numberas this unit.Replace the DVDwith one bearingthe correct regionnumber.<CRB3314-A/N>74En74AppendixAdditional Information
Message Cause ActionError-02-XX/FF-FFThe disc is dirty. Clean the disc.The disc isscratched.Replace the disc.The disc isloaded upsidedown.Check that the discis loaded correctly.There is an elec-trical or mechan-ical error.Press RESET.UnplayableDiscThis type of disccannot be playedon this unit.Replace the discwith one that canbe played on thisunit.The inserted discdoes not containany playablefiles.Replace the disc.Protect All the files onthe inserted discare embeddedwith DRM.Replace the disc.Skipped The inserted disccontains DRMprotected WMAfiles.Play an audio filenot embedded withWindows MediaDRM 9/10.Temp The temperatureof the unit is out-side the normaloperating range.Wait until the unitreturns to a tem-perature within thenormal operatinglimits.Rental Ex-pired.The inserted disccontains expiredDivX VOD con-tent.Select a file thatcan be played.File Not Play-able-High De-finitionThe inserted disccontains a highdefinition DivXfile.Select a file thatcan be played.It is not possi-ble to write itin the flash.This unit’s flashmemory used asthe temporarystorage area isfull.Select a file thatcan be played.AuthorizationErrorThis unit’s DivXregistration codehas not beenauthorized by theDivX VOD con-tents provider.Register this unitto the DivX VODcontents provider.(Page 41)Message Cause ActionUnplayableFileThis type of filecannot be playedon this unit.Select a file thatcan be played.Format Read Sometimes thereis a delay be-tween the start ofplayback andwhen you start tohear any sound.Wait until the mes-sage disappearsand you hearsound.Video framerate not sup-ported.DivX file’s framerate is more than30 fps.Select a file thatcan be played.Audio formatnot sup-ported.This type of file isnot supported onthis unit.Select a file thatcan be played.External storage device (USB, SD)Message Cause ActionUnplayableFileThis type of filecannot be playedon this unit.Select a file thatcan be played.There are nosongs.Transfer the audiofiles to the USBportable audioplayer/USB mem-ory and connect.Security for theconnected USBmemory is en-abled.Follow the USBmemory instruc-tions to disable se-curity.Format Read Sometimes thereis a delay be-tween the start ofplayback andwhen you start tohear any sound.Wait until the mes-sage disappearsand you hearsound.Skipped The connectedUSB portableaudio player/USB memorycontains WMAfiles that are pro-tected byWindows Med-iaäDRM 9/10.Play an audio filenot embedded withWindows MediaDRM 9/10.<CRB3314-A/N>75En 75AppendixAdditional InformationAdditional Information
Message Cause ActionProtect All the files onthe connectedUSB portableaudio player/USB memory areprotected byWindows MediaDRM 9/10.Transfer audio filesnot protected byWindows MediaDRM 9/10 to theUSB portableaudio player/USBmemory and con-nect.N/A USB The USB deviceconnected to isnot supported bythis unit.Connect a USBportable audioplayer or USBmemory that isUSB Mass StorageClass compliant.The USB deviceis not formattedwith FAT16 orFAT32.The connectedUSB device shouldbe formatted withFAT16 or FAT32.IncompatibleSDUnsupported SDcard is inserted.Use the surpportedSD card.Not compatibleSD storage de-viceRemove your de-vice and replace itwith a compatibleSD storage device.Check USB The USB connec-tor or USB cablehas short-circuited.Check that theUSB connector orUSB cable is notcaught in some-thing or damaged.The connectedUSB portableaudio player/USB memoryconsumes morethan maximumallowable cur-rent.Disconnect theUSB portableaudio player/USBmemory and donot use it. Turn theignition switch toOFF, then to ACCor ON and thenconnect a compli-ant USB portableaudio player/USBmemory.Message Cause ActionError-02-9X/-DXCommunicationfailed.Perform one of thefollowing opera-tions.–Turn the ignitionswitch OFF andback ON.–Disconnect theUSB portableaudio player/USBmemory.–Change to a dif-ferent source.Then, return to theUSB portableaudio player/USBmemory.Rental Ex-pired.The inserted disccontains expiredDivX VOD con-tent.Select a file thatcan be played.File Not Play-able-High De-finitionThe inserted disccontains a highdefinition DivXfile.Select a file thatcan be played.It is not possi-ble to write itin the flash.This unit’s flashmemory used asthe temporarystorage area isfull.Select a file thatcan be played.AuthorizationErrorThis unit’s DivXregistration codehas not beenauthorized by theDivX VOD con-tents provider.Register this unitto the DivX VODcontents provider.(Page 41)UnplayableFileThis type of filecannot be playedon this unit.Select a file thatcan be played.Format Read Sometimes thereis a delay be-tween the start ofplayback andwhen you start tohear any sound.Wait until the mes-sage disappearsand you hearsound.Video framerate not sup-ported.DivX file’s framerate is more than30 fps.Select a file thatcan be played.Audio formatnot sup-ported.This type of file isnot supported onthis unit.Select a file thatcan be played.<CRB3314-A/N>76En76AppendixAdditional Information
iPodMessage Cause ActionFormat Read Sometimes thereis a delay be-tween the start ofplayback andwhen you start tohear any sound.Wait until the mes-sage disappearsand you hearsound.Error-02-6X/-9X/-DXCommunicationfailed.Disconnect thecable from theiPod. Once theiPod's main menuis displayed, recon-nect the iPod andreset it.iPod failure Disconnect thecable from theiPod. Once theiPod's main menuis displayed, recon-nect the iPod andreset it.Error-02-67 The iPod firm-ware versions areold.Update the iPodversion.STEP There are nosongs.Transfer songs tothe iPod.There are nosongs in the cur-rent list.Select a list thatcontains songs.iTunes taggingMessage Cause ActioniPod full. Tagsnot trans-ferred.Memory used fortag informationon the iPod isfull.Sync the iPod withiTunes and cleanup the tagged play-list.Memory full.Tags notstored.This unit’s flashmemory used asthe temporarystorage area isfull.Connect the iPodto this unit andtransfer this unit’stag information tothe iPod.Tags trans-ferred failed.This unit’s tag in-formation cannottransfer to theiPod.Check the iPodand try again.Tag storefailed.Tag informationcannot be storedin this unit.Try again.Message Cause ActionError-8D Built-in FLASHROM encoun-tered an errorTurn the ignitionOFF and ON.SD source can-not be se-lected duringtag transfer.Tag informationis being trans-ferred to theiPod.Wait until tagtransfer is com-plete.BluetoothMessage Cause ActionError-10 The power failedfor the Bluetoothmodule of thisunit.Turn the ignitionswitch OFF andthen to ACC or ON.If the error mes-sage is still dis-played afterperforming theabove action,please contactyour dealer or anauthorized PioneerService Station.Understanding auto EQerror messagesWhen correct measurement of the car’s inter-ior acoustic characteristics is not possibleusing auto EQ, an error message may appearon the display. In such cases, refer to the tablebelow to see what the problem is and how itmay be corrected. After checking, try again.Message Cause ActionError. Pleasecheck MIC.The microphoneis not connected.Plug the optionalmicrophone se-curely into thejack.<CRB3314-A/N>77En 77AppendixAdditional InformationAdditional Information
Message Cause ActionError. Pleasecheck xxxxspeaker.The microphonecannot pick upthe measuringtone of a speaker.!Confirm that thespeakers are con-nected correctly.!Correct the inputlevel setting of thepower amp con-nected to thespeakers.!Plug the micro-phone securelyinto the jack.Error. Pleasecheck noise.The surroundingnoise level is toohigh.!Stop your car ina place that isquiet, and switchoff the engine, airconditioner andheater.!Set the micro-phone correctly.Error. Pleasecheck battery.Power is notbeing suppliedfrom the batteryto this unit.!Connect the bat-tery correctly.!Check the batteryvoltage.Understanding messagesMessages TranslationCAUTION: Screenimage may appear re-versed.Pioneer recommendsthe use of a camerawhich outputs mirror-reversed images.Otherwise, the screenimage will appear re-versed.<CRB3314-A/N>78En78AppendixAdditional Information
<CRB3314-A/N>79En 79AppendixAdditional InformationAdditional Information
Indicator listArea 1 Area 2Area 3Area 1Indicates that the selected fre-quency is being broadcast instereo.Indicates that a Bluetooth tele-phone is connected.Indicates that the digital format isDolby Digital.Indicates that the digital format isMPEG Audio.Indicates that the digital format isLinear PCM.Indicates the sampling frequency.Indicates that the digital format isDTS.1+1ch2 chMchIndicates the audio channel.Indicates that a disc with PBC Onis being played.Indicates that a cellular phone isconnected.!Indicates that an incoming callhas been received and has notbeen checked yet.!Not displayed for calls madewhen your cellular phone isdisconnected from this unit.Indicates the battery strength ofthe cellular phone.!The level shown on the indica-tor may differ from the actualbattery strength.!If the battery strength is notavailable, nothing is displayedin the battery strength indica-tor area.Indicates the signal strength of thecellular phone.Indicates that Auto EQ is on.Shows when HD Radio signal is re-ceived.Shows when analog audio of HDRadio signal is received.Shows when digital audio of HDRadio signal is received.Shows when HD Radio station in-formation is received.Shows when downloadable songinformation (tag) from a radio sta-tion is received.Shows when song information(tag) from an HD Radio station isbeing saved to this unit.Shows while searching a song/video in alphabet search mode.Shows when song information(tag) is being saved to your iPod.Shows when this unit has the songinformation (tag).Shows which audio language hasbeen selected.<CRB3314-A/N>80En80AppendixAdditional Information
Shows which subtitle languagehas been selected.Shows which viewing angle hasbeen selected.Shows which audio output hasbeen selected.Area 2Shows the disc title of the CD textdisc currently being played.Shows the song title when receivingthe tag information.Shows the track title of the track cur-rently being played for CD text discs.Shows the song title of the song cur-rently being played for MP3/WMA/AAC files.Shows the comment currently beingplayed.Shows the station name currentlytuned in to.Shows the artist name when receiv-ing the tag information.Shows the artist name of the track/song currently being played for CDtext discs.Shows the artist name of the artistcurrently being played for MP3/WMA/AAC files.Shows cellular phone information.Shows general phone information.Shows home phone information.Shows office phone information.Shows other phone information.Shows the category name.Shows the folder name of the foldercontaining the MP3/WMA/AAC filecurrently being played.Shows the file name of the MP3/WMA/AAC file currently beingplayed.Shows the preset number of the sta-tion currently being tuned in to.CHShows the channel currently beingtuned in to.Shows SIRIUS information.Area 3Shows the title number currentlybeing played.Shows the chapter number cur-rently being played.Shows the replay time currentlybeing played.Shows when the game alert func-tion is on while receiving SIRIUSstations.Shows the genre of the track/songcurrently being played.Indicates that the feature demo ison.<CRB3314-A/N>81En 81AppendixAdditional InformationAdditional Information
Handling guidelineDiscs and playerUse only discs featuring any of following logos.Use 12-cm disc. Do not use 8-cm disc or an adapterfor 8-cm disc.Use only conventional, fully circular discs. Do not useshaped discs.Do not insert anything other than a DVD (-R/-RW) orCD (-R/-RW) into the disc loading slot.Do not use cracked, chipped, warped, or otherwisedamaged discs as they may damage the player.Unfinalized CD-R/CD-RW disc playback is not possi-ble.Do not touch the recorded surface of the discs.Store discs in their cases when not in use.Avoid leaving discs in excessively hot environmentsincluding under direct sunlight.Do not attach labels, write on or apply chemicals tothe surface of the discs.To clean a disc, wipe the disc with a soft cloth out-ward from the center.Condensation may temporarily impair the player’sperformance. Leave it to adjust to the warmer tem-perature for about one hour. Also, wipe any dampdiscs with a soft cloth.Playback of discs may not be possible because ofdisc characteristics, disc format, recorded applica-tion, playback environment, storage conditions, andso on.Road shocks may interrupt disc playback.Read the precautions for discs before using them.Certain functions may not be available for some DVDvideo discs.It may not be possible to play back some DVD videodiscs.It is not possible to play back DVD-RAM discs.This unit is not compatible with discs recorded inAVCHD (Advanced Video Codec High Definition) for-mat. Do not insert AVCHD discs as you may not beable to eject the disc.External storage device (USB, SD)Address any questions you have about your externalstorage device (USB, SD) to the manufacturer of thedevice.Do not leave the external storage device (USB, SD) inplaces with high temperatures.Depending on the external storage device (USB, SD),the following problems may occur.!Operations may vary.!The storage device may not be recognized.!Files may not be played back properly.USB storage deviceConnections via USB hub are not supported.Do not connect anything other than a USB storagedevice.Firmly secure the USB storage device when driving.Do not let the USB storage device fall onto the floor,where it may become jammed under the brake or ac-celerator pedal.Depending on the USB storage device, the devicemay cause noise to occur on the radio.Copyright protected files that are stored in the USBdevices cannot be played back.You cannot connect a USB portable audio player/USBmemory to this unit via USB hub.Partitioned USB memory is not compatible with thisunit.<CRB3314-A/N>82En82AppendixAdditional Information
Depending on the kind of USB portable audio player/USB memory you use, the device may not be recog-nized or audio files may not be played back properly.Do not leave the USB portable audio player/USBmemory in direct sunlight for extended amounts oftime. Doing so may cause the device to malfunctionfrom the extreme rise in temperature.SD memory cardThis unit supports only the following types of SDmemory cards.!SDKeep the SD memory card out of the reach of chil-dren. Should the SD memory card be swallowed, con-sult a doctor immediately.Do not touch the connectors of the SD memory carddirectly with your fingers or with any metal device.Do not insert anything other than an SD memory cardinto the SD card slot. If a metal object (such as acoin) is inserted into the slot, the internal circuits maybreak and cause malfunctions.Do not insert a damaged SD memory card (e.g.warped, label peeled off) as it may not be ejectedfrom the slot.Do not try to force an SD memory card into the SDcard slot as the card or this unit may be damaged.When ejecting an SD memory card, press it and holdit until it clicks. It is dangerous to release your fingerimmediately after pressing the card as it may shootout of the slot and hit you in the face, etc. If the cardshoots out of the slot, it may be lost.iPodDo not leave the iPod in direct sunlight for extendedamounts of time. Doing so may cause the iPod tomalfunction from the extreme rise in temperature.Do not leave the iPod in places with high tempera-tures.To ensure proper operation, connect the dock connec-tor cable from the iPod directly to this unit.Firmly secure the iPod when driving. Do not let theiPod fall onto the floor, where it may become jammedunder the brake or accelerator pedal.For details, refer to the manuals for the iPod.About iPod settings!When an iPod is connected, this unit changes theEQ (equalizer) setting of the iPod to off in order tooptimize the acoustics. When you disconnect theiPod, the EQ returns to the original setting.!You cannot set Repeat to off on the iPod whenusing this unit. Repeat is automatically changedto All when the iPod is connected to this unit.DVD-R/DVD-RW discsUnfinalized DVD-R/-RW discs which have been re-corded in the Video format (video mode) cannot beplayed back.Playback of DVD-R/DVD-RW discs may not be possi-ble, due to disc characteristics, scratches or dirt onthe disc, or dirt, condensation, etc. on the lens of thisunit.Depending on the application settings and the envir-onment, playback of discs recorded on a personalcomputer may not be possible. (For details, contactthe manufacturer of the application.)CD-R/CD-RW discsWhen CD-R/CD-RW discs are used, playback is possi-ble only for discs which have been finalized.Playback of CD-R/CD-RW discs recorded on a musicCD recorder or a personal computer may not be pos-sible due to disc characteristics, scratches or dirt onthe disc, or dirt, condensation, etc., on the lens of thisunit.Depending on the application settings and the envir-onment, playback of discs recorded on a personalcomputer may not be possible. (For details, contactthe manufacturer of the application.)Playback of CD-R/CD-RW discs may become impossi-ble in case of direct exposure to sunlight, high tem-peratures, or the storage conditions in the vehicle.Titles and other text information recorded on a CD-R/CD-RW disc may not be displayed by this unit (in thecase of audio data (CD-DA)).DualDiscsDualDiscs are two-sided discs that have a recordableCD for audio on one side and a recordable DVD forvideo on the other.Playback of the DVD side is possible with this unit.However, since the CD side of DualDiscs is not physi-cally compatible with the general CD standard, it maynot be possible to play the CD side with this unit.<CRB3314-A/N>83En 83AppendixAdditional InformationAdditional Information
Frequent loading and ejecting of a DualDisc may re-sult in scratches on the disc. Serious scratches canlead to playback problems on this unit. In somecases, a DualDisc may become stuck in the disc load-ing slot and will not eject. To prevent this, we recom-mend you refrain from using DualDisc with this unit.Please refer to the information from the disc manu-facturer for more detailed information about Dual-Discs.JPEG picture filesJPEG is short for Joint Photographic Experts Groupand refers to a still image compression technologystandard.Files are compatible with Baseline JPEG and EXIF 2.1still images up to a resolution of 8 192 × 7 680. (EXIFformat is used most commonly with digital still cam-eras.)Playback of EXIF format files that were processed by apersonal computer may not be possible.There is no progressive JPEG compatibility.DivX video filesDepending on the composition of the file information,such as the number of audio streams or file size,there may be a slight delay when playing back discs.Some special operations may be prohibited due tothe composition of the DivX files.Only DivX files downloaded from a DivX partner siteare guarantee for proper operation. UnauthorizedDivX files may not operate properly.DRM rental files cannot be operated until playback isstarted.Recommended file size: 2 Mbps or less with a trans-mission rate of 2 GB or less.The ID code of this unit must be registered to a DivXVOD provider in order to playback DivX VOD files. Forinformation on ID codes, refer to Displaying the DivXÒVOD registration code on page 61.For more details about DivX, visit the following site:http://www.divx.com/Important!When naming a JPEG image file, add the cor-responding filename extension (.jpg, .jpeg, .jpe or .jfif).!This unit plays back files with these filenameextensions (.jpg, .jpeg, .jpe or .jfif) as a JPEGimage file. To prevent malfunctions, do notuse these extensions for files other than JPEGimage files.Compressed audiocompatibility (disc, USB, SD)WMAFile extension: .wmaBit rate: 5 kbps to 320 kbps (CBR), VBRSampling frequency: 8 kHz to 48 kHzWindows Media Audio Professional, Lossless, Voice/DRM Stream/Stream with video: NoMP3File extension: .mp3Bit rate: 8 kbps to 320 kbpsSampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1kHz, 48 kHz for emphasis)Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3 (ID3 tagVersion 2.x is given priority over Version 1.x.)M3u playlist: NoMP3i (MP3 interactive), mp3 PRO: NoAACCompatible format: AAC encoded by iTunesFile extension: .m4aSampling frequency: 8 kHz to 44.1 kHzBit rate: 8 kbps to 320 kbpsApple Lossless: NoAAC file bought on the iTunes Store (.m4p file exten-sion): No<CRB3314-A/N>84En84AppendixAdditional Information
DivX compatibilityCompatible format: DivX video format implemented inrelation to DivX standardsFile extensions: .avi or .divxDivX Ultra format: NoDivX HD format: NoDivX files without video data: NoDivX plus: NoCompatible audio codec: MP2, MP3, Dolby DigitalLPCM: NoBit rate: 8 kbps to 320 kbps (CBR), VBRSampling frequency: 8 kHz to 48 kHzCompatible external subtitle file extension: .srtSupplemental informationSome characters in a file name (including the file ex-tension) or a folder name may not be displayed.This unit may not operate correctly depending on theapplication used to encode WMA files.There may be a slight delay when starting playback ofaudio files embedded with image data.DiscPlayable folders: up to 700Playable files: up to 999 for CD-R/CD-RWPlayable files: up to 3 500 for DVD-R/DVD-RWFile system: ISO 9660 Level 1 and 2, Romeo, Joliet,UDF 1.02 (DVD-R/DVD-RW)Multi-session playback: YesPacket write data transfer: NoRegardless of the length of blank section between thesongs of the original recording, compressed audiodiscs play with a short pause between songs.External storage device (USB, SD)Playable folders: up to 6 000Playable files: up to 65 535, up to 255 for one folderPlayback of copyright protected files: NoPartitioned external storage device (USB, SD): Onlythe first playable partition can be played.There may be a slight delay when starting playback ofaudio files on an external storage device (USB, SD)with numerous folder hierarchies.Compatibility with all SD memory cards is not guaran-teed.This unit is not compatible with SD-Audio/SD-Video.CAUTIONPioneer accepts no responsibility for data lost onthe USB memory/USB portable audio player/SDmemory card even if that data is lost while usingthis unit.iPod compatibilityThis unit supports only the following iPod models.Supported iPod software versions are shown below.Older versions may not be supported.!iPod nano 5th generation (software version 1.0.2)!iPod nano 4th generation (software version 1.0.3)!iPod nano 3rd generation (software version 1.1.3)!iPod nano 2nd generation (software version 1.1.3)!iPod nano 1st generation (software version 1.3.1)!iPod touch 2nd generation (software version 3.0)!iPod touch 1st generation (software version 3.0)!iPod classic 120GB (software version 2.0.1)!iPod classic (software version 1.1.2)!iPod 5th generation (software version 1.3.0)!iPhone 3GS (software version 3.0)!iPhone 3G (software version 3.0)!iPhone (software version 3.0)Depending on the generation or version of the iPod,some functions can not be operated.Operations may vary depending on the software ver-sion of iPod.When using an iPod, iPod Dock Connector to USBCable is required.Pioneer CD-IU50 interface cable is also available. Fordetails, consult your dealer.About the file/format compatibility, refer to iPod man-uals.Audio Book, Podcast: Yes<CRB3314-A/N>85En 85AppendixAdditional InformationAdditional Information
CAUTIONPioneer accepts no responsibility for data lost onthe iPod even if that data is lost while using thisunit.Sequence of audio filesThe user cannot assign folder numbers andspecify playback sequences with this unit.Example of a hierarchyLevel 1 Level 2 Level 3 Level 4 0102030405: Folder: Compressedaudio file01 to 05: Foldernumber1to 6: PlaybacksequenceDiscFolder selection sequence or other operationmay differ depending on the encoding or writ-ing software.External storage device (USB, SD)Playback sequence is the same as recordedsequence in the external storage device (USB,SD).To specify the playback sequence, the follow-ing method is recommended.1Create the file name including numbers thatspecify the playback sequence (e.g., 001xxx.mp3 and 099yyy.mp3).2Put those files into a folder.3Save the folder containing files on the externalstorage device (USB, SD).However, depending on the system environ-ment, you may not be able to specify the play-back sequence.For USB portable audio players, the sequenceis different and depends on the player.Using the display correctlyCAUTION!If liquid or foreign matter should get insidethis unit, turn off the power immediately andconsult your dealer or the nearest authorizedPIONEER Service Station. Do not use the unitin this condition because doing so may resultin fire, electric shock, or other failure.!If you notice smoke, a strange noise or smell,or any other abnormal signs from the display,turn off the power immediately and consultyour dealer or the nearest authorizedPIONEER Service Station. Using this unit inthis condition may result in permanent da-mage to the system.!Do not disassemble or modify this unit, asthere are high-voltage components insidewhich may cause electric shock. Be sure toconsult your dealer or the nearest authorizedPIONEER Service Station for internal inspec-tion, adjustments, or repairs.Handling the display!Never touch the screen with anything be-sides your finger when operating the touchpanel function. The screen can scratch ea-sily.!When the display is subjected to direct sun-light for a long period of time, it will be-come very hot resulting in possibledamage to the LCD screen. You shouldavoid exposing the display unit to directsunlight as much as possible.!The display should be used within the tem-perature range of -10°C to +60°C (14 °F to140 °F).At temperatures higher or lower than thisoperating temperature range, the displaymay not operate normally.!The LCD screen is exposed in order to in-crease its visibility within the vehicle. Donot press it strongly on it as this may da-mage it.!Do not push the LCD screen forcefully asthis may scratch it.<CRB3314-A/N>86En86AppendixAdditional Information
Liquid crystal display (LCD) screen!Heat from the heater may damage the LCDscreen, and cool air from the cooler maycause moisture to form inside the displayresulting in possible damage.!Small black dots or white dots (bright dots)may appear on the LCD screen. These aredue to the characteristics of the LCDscreen and do not indicate a malfunction.!When using a cellular phone, keep the an-tenna away from the display to prevent dis-ruption of the video image by theappearance of spots, colored stripes, etc.LED (light-emitting diode)backlight!At low temperatures, using the LED back-light may increase image lag and degradethe image quality due to the characteristicsof the LCD screen. Image quality will im-prove with an increase in temperature.!To protect the LED backlight, the displaywill darken in the following environments:—In the direct sunlight—Near the heater vent!The product lifetime of the LED backlight ismore than 10 000 hours. However, it maydecrease if used in high temperatures.!If the LED backlight reaches the end of itsproduct lifetime, the screen will becomedark and the image will no longer be pro-jected. In such cases, please consult yourdealer or the nearest authorized PIONEERService Station.Keeping the display in goodcondition!When removing dust from the screen orcleaning the display, first turn the systempower off, then wipe with a soft dry cloth.!When wiping the screen, take care not toscratch the surface. Do not use harsh orabrasive chemical cleaners.Copyright and trademarkThis product incorporates copyright protectiontechnology that is protected by method claimsof certain U.S. patents and other intellectualproperty rights owned by MacrovisionCorporation and other rights owners. Use ofthis copyright protection technology must beauthorized by Macrovision Corporation, and isintended for home and other limited viewinguses only unless otherwise authorized byMacrovision Corporation. Reverse engineeringor disassembly is prohibited.BluetoothThe BluetoothÒword mark and logos are regis-tered trademarks owned by Bluetooth SIG, Inc.and any use of such marks by PioneerCorporation is under license. Other trade-marks and trade names are those of their re-spective owners.!Bluetooth is a short-range wireless radioconnectivity technology that is developedas a cable replacement for mobile phones,handheld PCs and other devices. Bluetoothoperates in 2.4 GHz frequency range andtransmits voice and data at speeds up to 1megabit per second. Bluetooth waslaunched by a special interest group (SIG)that comprises of Ericsson Inc., Intel Corp.,Nokia Corp., Toshiba and IBM in 1998, andit is currently developed by nearly 2 000companies worldwide.<CRB3314-A/N>87En 87AppendixAdditional InformationAdditional Information
DVD videois a trademark of DVD Format/LogoLicensing Corporation.iTunesApple and iTunes are trademarks of AppleInc., registered in the U.S. and other coun-tries.MP3Supply of this product only conveys a licensefor private, non-commercial use and does notconvey a license nor imply any right to usethis product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial,satellite, cable and/or any other media), broad-casting/streaming via internet, intranets and/or other networks or in other electronic con-tent distribution systems, such as pay-audio oraudio-on-demand applications. An indepen-dent license for such use is required. For de-tails, please visithttp://www.mp3licensing.com.WMAWindows Media and the Windows logo are tra-demarks or registered trademarks of MicrosoftCorporation in the United States and/or othercountries.This product includes technology owned byMicrosoft Corporation and cannot be used ordistributed without a license from MicrosoftLicensing, Inc.SD memory cardSD Logo is a trademark.iPodiPod is a trademark of Apple Inc., registered inthe U.S. and other countries.“Made for iPod”means that an electronic ac-cessory has been designed to connect specifi-cally to iPod and has been certified by thedeveloper to meet Apple performance stan-dards.Apple is not responsible for the operation ofthis device or its compliance with safety andregulatory standards.iPhoneiPhone is a trademark of Apple Inc.“Works with iPhone”means that an electronicaccessory has been designed to connect spe-cifically to iPhone and has been certified bythe developer to meet Apple performancestandards.<CRB3314-A/N>88En88AppendixAdditional Information
Apple is not responsible for the operation ofthis device or its compliance with safety andregulatory standards.Dolby DigitalManufactured under license from DolbyLaboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of DolbyLaboratories.DivXDivXÒis a registered trademark of DivX, Inc.,and is used under license.ABOUT DIVX VIDEO: DivXÒis a digitalvideo format created by DivX, Inc. This is an of-ficial DivX Certified device that plays DivXvideo. Visit www.divx.com for more informa-tion and software tools to convert your filesinto DivX video.ABOUT DIVX VIDEO-ON-DEMAND: ThisDivX CertifiedÒdevice must be registered inorder to play DivX Video-on-Demand (VOD)content. To generate the registration code, lo-cate the DivX VOD section in Menu operations.Go to vod.divx.com with this code to completethe registration process and learn more aboutDivX VOD.About the SAT RADIO READY markThe SAT RADIO READY mark indicates thatthe Satellite Radio Tuner for Pioneer (i.e., XMtuner and Sirius satellite tuner which are soldseparately) can be controlled by this unit.Please inquire to your dealer or nearestauthorized Pioneer service station regardingthe satellite radio tuner that can be connectedto this unit. For satellite radio tuner operation,please refer to the satellite radio tuner owner’smanual.!The system will use direct satellite-to-recei-ver broadcasting technology to provide lis-teners in their cars and at home withcrystal-clear sound seamlessly from coastto coast. Satellite radio will create andpackage over 100 channels of digital-qualitymusic, news, sports, talk and children’sprogramming.HD RadioäTechnology!HD Radioäand the HD Radio Ready logoare proprietary trademarks of iBiquity Digi-tal Corporation.Language code chart for DVD<CRB3314-A/N>89En 89AppendixAdditional InformationAdditional Information
Language (code), input codeJapanese (ja), 1001 Dzongkha (dz), 0426 Kurdish (ku), 1121 Kinyarwanda (rw), 1823English (en), 0514 Ewe (ee), 0505 Komi (kv), 1122 Sanskrit (sa), 1901French (fr), 0618 Esperanto (eo), 0515 Cornish (kw), 1123 Sardinian (sc), 1903Spanish (es), 0519 Estonian (et), 0520 Kirghiz, Kyrgyz (ky), 1125 Sindhi (sd), 1904German (de), 0405 Basque (eu), 0521 Latin (la), 1201 Northern Sami (se), 1905Italian (it), 0920 Persian (fa), 0601 Luxembourgish (lb), 1202 Sangho (sg), 1907Chinese (zh), 2608 Fulah (ff), 0606 Ganda (lg), 1207 Sinhala (si), 1909Dutch, Flemish (nl), 1412 Finnish (fi), 0609 Limburgan (li), 1209 Slovak (sk), 1911Portuguese (pt), 1620 Fijian (fj), 0610 Lingala (ln), 1214 Slovenian (sl), 1912Swedish (sv), 1922 Faroese (fo), 0615 Lao (lo), 1215 Samoan (sm), 1913Russian (ru), 1821 Western Frisian (fy), 0625 Lithuanian (lt), 1220 Shona (sn), 1914Korean (ko), 1115 Irish (ga), 0701 Luba-Katanga (lu), 1221 Somali (so), 1915Greek (el), 0512 Gaelic (gd), 0704 Latvian (lv), 1222 Albanian (sq), 1917Afar (aa), 0101 Galician (gl), 0712 Malagasy (mg), 1307 Serbian (sr), 1918Abkhazian (ab), 0102 Guarani (gn), 0714 Marshallese (mh), 1308 Swati (ss), 1919Avestan (ae), 0105 Gujarati (gu), 0721 Maori (mi), 1309 Sotho, Southern (st), 1920Afrikaans (af), 0106 Manx (gv), 0722 Macedonian (mk), 1311 Sundanese (su), 1921Akan (ak), 0111 Hausa (ha), 0801 Malayalam (ml), 1312 Swahili (sw), 1923Amharic (am), 0113 Hebrew (he), 0805 Mongolian (mn), 1314 Tamil (ta), 2001Aragonese (an), 0114 Hindi (hi), 0809 Marathi (mr), 1318 Telugu (te), 2005Arabic (ar), 0118 Hiri Motu (ho), 0815 Malay (ms), 1319 Tajik (tg), 2007Assamese (as), 0119 Croatian (hr), 0818 Maltese (mt), 1320 Thai (th), 2008Avaric (av), 0122 Haitian (ht), 0820 Burmese (my), 1325 Tigrinya (ti), 2009Aymara (ay), 0125 Hungarian (hu), 0821 Nauru (na), 1401 Turkmen (tk), 2011Azerbaijani (az), 0126 Armenian (hy), 0825 Bokmal (nb), 1402 Tagalog (tl), 2012Bashkir (ba), 0201 Herero (hz), 0826 Ndebele, North (nd), 1404 Tswana (tn), 2014Belarusian (be), 0205 Interlingua (ia), 0901 Nepali (ne), 1405 Tonga (to), 2015Bulgarian (bg), 0207 Indonesian (id), 0904 Ndonga (ng), 1407 Turkish (tr), 2018Bihari (bh), 0208 Interlingue (ie), 0905 Nynorsk (nn), 1414 Tsonga (ts), 2019Bislama (bi), 0209 Igbo (ig), 0907 Norwegian (no), 1415 Tatar (tt), 2020Bambara (bm), 0213 Sichuan Yi (ii), 0909 Ndebele, South (nr), 1418 Twi (tw), 2023Bengali (bn), 0214 Inupiaq (ik), 0911 Navajo, Navaho (nv), 1422 Tahitian (ty), 2025Tibetan (bo), 0215 Ido (io), 0915 Chichewa (ny), 1425 Uighur, Uyghur (ug), 2107Breton (br), 0218 Icelandic (is), 0919 Occitan (oc), 1503 Ukrainian (uk), 2111Bosnian (bs), 0219 Inuktitut (iu), 0921 Ojibwa (oj), 1510 Urdu (ur), 2118Catalan (ca), 0301 Javanese (jv), 1022 Oromo (om), 1513 Uzbek (uz), 2126Chechen (ce), 0305 Georgian (ka), 1101 Oriya (or), 1518 Venda (ve), 2205Chamorro (ch), 0308 Kongo (kg), 1107 Ossetian (os), 1519 Vietnamese (vi), 2209Corsican (co), 0315 Kikuyu, Gikuyu (ki), 1109 Panjabi, Punjabi (pa),1601 Volapük (vo), 2215Cree (cr), 0318 Kuanyama (kj), 1110 Pali (pi), 1609 Walloon (wa), 2301Czech (cs), 0319 Kazakh (kk), 1111 Polish (pl), 1612 Wolof (wo), 2315Church Slavic (cu), 0321 Kalaallisut (kl), 1112 Pashto, Pushto (ps), 1619 Xhosa (xh), 2408Chuvash (cv), 0322 Central Khmer (km), 1113 Quechua (qu), 1721 Yiddish (yi), 2509Welsh (cy), 0325 Kannada (kn), 1114 Romansh (rm), 1813 Yoruba (yo), 2515Danish (da), 0401 Kanuri (kr), 1118 Rundi (rn), 1814 Zhuang, Chuang (za),2601Divehi (dv), 0422 Kashmiri (ks), 1119 Romanian (ro), 1815 Zulu (zu), 2621<CRB3314-A/N>90En90AppendixAdditional Information
SpecificationsGeneralPower source ............................. 14.4 V DC (10.8 V to 15.1 Vallowable)Grounding system ................... Negative typeMaximum current consumption..................................................... 10.0 ADimensions (W × H × D):DINChassis ..................... 180 mm × 50 mm × 160mm(7-1/8 in. × 2 in. × 6-1/4 in.)Nose ........................... 188 mm × 58 mm × 32 mm(7-3/8 in.× 2-1/4 in.× 1-1/4in.)DChassis ............................... 178 mm × 50 mm × 165mm(7 in.× 2 in.× 6-1/2 in.)Nose ..................................... 170 mm × 46 mm × 27 mm(6-3/4 in.× 1-3/4 in.× 1 in.)Weight .......................................... 2.2 kg (4.9 lbs)DisplayScreen size/aspect ratio ....... 7.0 inch wide/16:9(effective display area: 154× 86.9 mm)Pixels ............................................. 345 600 (1 440 × 240)Display method ........................ TFT active matrix, drivingtypeColor system .............................. NTSCDurable temperature range (power off)..................................................... -20 °C to +80 °CAngle adjustment .................... 50° to 110°(initial settings: 90°)AudioMaximum power output ....... 50 W × 470 W × 1/2 W(for subwoo-fer)Continuous power output ... 22 W × 4 (50 Hz to 15 000Hz, 5 % THD, 4 Wload, bothchannels driven)Load impedance ...................... 4W(4 Wto 8 W(2 Wfor 1ch) allowable)Preout maximum output level..................................................... 4.0 VEqualizer (8-Band Graphic Equalizer):Frequency .......................... 40/80/200/400/1k/2.5k/8k/10k HzGain ...................................... ±12 dBHPF:Frequency .......................... 50/63/80/100/125 HzSlope .................................... –12 dB/octSubwoofer (mono):Frequency .......................... 50/63/80/100/125 HzSlope .................................... –18 dB/octGain ...................................... +6 dB to –24 dBPhase .................................. Normal/ReverseBass boost:Gain ...................................... +12 dB to 0 dBDVD PlayerSystem .......................................... DVD video, Video CD, CD,WMA, MP3, AAC, DivX,JPEG systemUsable discs .............................. DVD video, Video CD, CD,CD-R/RW, DVD-R/RW/RDLRegion number ........................ 1Frequency response ............... 5 Hz to 44 000 Hz (with DVD,at sampling frequency 96kHz)Signal-to-noise ratio ............... 96 dB (1 kHz) (IHF-A net-work) (RCA level)Output level:Video .................................... 1.0 Vp-p/75 W(±0.2 V)Number of channels .............. 2 (stereo)MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2chaudio)(Windows Media Player)AAC decoding format ............ MPEG-4 AAC (iTunes en-coded only) (.m4a)(Ver. 8.2 and earlier)DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,6 (.avi, .divx)USBUSB standard specification..................................................... USB 1.1, USB 2.0 full speedMaximum current supply .... 500 mAUSB Class ................................... MSC (Mass Storage Class)File system .................................. FAT16, FAT32MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2chaudio)(Windows Media Player)AAC decoding format ............ MPEG-4 AAC (iTunes en-coded only) (.m4a)(Ver. 8.2 and earlier)DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,6 (.avi, .divx)SDCompatible physical format..................................................... Version 1.1<CRB3314-A/N>91En 91AppendixAdditional InformationAdditional Information
Maximum memory capacity..................................................... 2GBFile system .................................. FAT12, FAT16, FAT32MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2chaudio)(Windows Media Player)AAC decoding format ............ MPEG-4 AAC (iTunes en-coded only)(Ver. 8.2 and earlier)DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,6 (.avi, .divx)FM tunerFrequency range ...................... 87.9 MHz to 107.9 MHzUsable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,S/N: 30 dB)Signal-to-noise ratio ............... 72 dB (IHF-A network)AM tunerFrequency range ...................... 530 kHz to 1 710 kHz (10kHz)Usable sensitivity ..................... 25 µV (S/N: 20 dB)Signal-to-noise ratio ............... 62 dB (IHF-A network)Bluetooth(AVH-P5200BT)Version .......................................... Bluetooth 2.0 certifiedOutput power ............................ +4 dBm Max.(Power class 2)CEA2006 SpecificationsPower output ............................. 14 W RMS × 4 Channels (4Wand ≦1 % THD+N)S/N ratio ....................................... 91 dBA (reference: 1 W into4W)NoteSpecifications and the design are subject to mod-ifications without notice.<CRB3314-A/N>92En92AppendixAdditional Information
<CRB3314-A/N>93En 93
<CRB3314-A/N>94En94
<CRB3314-A/N>95En 95
PIONEER CORPORATION4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPANPIONEER ELECTRONICS (USA) INC.P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404PIONEER EUROPE NVHaven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/BelgiqueTEL: (0) 3/570.05.11PIONEER ELECTRONICS ASIACENTRE PTE. LTD.253 Alexandra Road, #04-01, Singapore 159936TEL: 65-6472-7555PIONEER ELECTRONICS AUSTRALIA PTY. LTD.178-184 Boundary Road, Braeside, Victoria 3195, AustraliaTEL: (03) 9586-6300PIONEER ELECTRONICS OF CANADA, INC.300 Allstate Parkway, Markham, Ontario L3R 0P2, CanadaTEL: 1-877-283-5901TEL: 905-479-4411PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.Blvd.Manuel Avila Camacho 138 10 pisoCol.Lomas de Chapultepec, Mexico, D.F. 11000TEL: 55-9178-4270先鋒股份有限公司總公司：台北市中山北路二段44號13樓電話：(02) 2521-3588先鋒電子（香港）有限公司香港九龍尖沙嘴海港域世界商業中心9樓901-6室電話：(0852) 2848-6488Published by Pioneer Corporation.Copyright ã2009 by Pioneer Corporation.All rights reserved.Printed in Thailand<CRB3314-A/N> UC<KNAZX> <09K00000><CRB3314-A/N>96

Navigation menu