Pioneer K053 Spread Spectrum Transmitter User Manual ZC482 FCC and IC Users manual 120229

Pioneer Corporation Spread Spectrum Transmitter ZC482 FCC and IC Users manual 120229

User Manual

6.2.User’s Manual Requirement of FCC/IC rulesFCC/IC User's manual requirements that are required by FCC/IC rules are described onuser's manual of the vehicle as followings;『" NXH-0628, NXH-0828, DVZ-0528 and  DVZ-0728 " are installed in motor vehicle, " NXH-0628, NXH-0828, DVZ-0528 and  DVZ-0728 " have no manual for user.So, following FCC/IC user’s manual statement will be stated in user’s manual of themotor vehicle.』■FCC ID FCC ID:AJDK053■OET65 cautionThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment and meets the FCC radio frequency (RF) Exposure Guidelines in SupplementC to OET65. This equipment has very low levels of RF energy that it deemed to complywithout maximum permissive exposure evaluation (MPE).  But it is desirable that it shouldbe installed and operated keeping the radiator at least 20cm or more away from person’sbody (excluding extremities: hands, wrists, feet and ankles).■Co-LocationcautionThis transmitter must not be co-located or operated in conjunction with any otherantenna or transmitter.■StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired■FCCWARNINGFCC WARNINGChanges or modifications not expressly approved by the party  responsible for compliancecould void the user's authority to operate the equipment.■IC ID IC:775E-K053■RSS-102cautionThis equipment complies with IC radiation exposure limits set forth for an uncontrolledenvironment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Thisequipment has very low levels of RF energy that it deemed to comply without maximumpermissive exposure evaluation (MPE). But it is desirable that it should be installed andoperated keeping the radiator at least 20cm or more away from person’s body (excludingextremities: hands, wrists, feet and ankles).Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pourun environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui estconsidérée conforme sans évaluation de l’exposition maximale autorisée. Cependant, cetéquipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre ledispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds etchevilles).■AntennacautionUnder Industry Canada regulations, this radio transmitter may only operate using anantenna of a type and maximum (or lesser) gain approved for the transmitter by IndustryCanada. To reduce potential radio interference to other users, the antenna type and itsgain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is notmore than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gainde sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.■StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation issubject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesiredoperation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.FCCforNXH-0628NXH-0828DVZ-0528DVZ-0728ICforNXH-0628NXH-0828

Navigation menu