User manual
DVH-885AVBT
English
DVD AV RECEIVER
Owner's Manual
2En
Thank you for purchasing this PIONEER product.
To ensure proper use, please read through this manual before using this product. It is
especially important that you read and observe WARNINGs and CAUTIONs in this manual.
Please keep the manual in a safe and accessible place for future reference.
Contents
Precautions ......................................... 3
IMPORTANT SAFEGUARDS ......................3
To ensure safe driving ................................... 3
To avoid battery exhaustion ..........................4
Before you start .................................. 5
About this unit ...............................................5
In case of trouble ........................................... 5
Resetting the microprocessor .......................5
Disable the demonstration mode ..................5
Operating this unit .............................6
Basic operations .........................................9
Removing the front panel to protect your unit
from theft .......................................................9
Re-attaching the front panel ..........................9
Turning the unit on ........................................9
Turning the unit off ........................................9
Selecting a source ......................................... 9
Adjusting the volume .....................................9
Use and care of the remote control .........10
Using the remote control .............................10
Replacing the battery ..................................10
Basic menu operations ............................. 10
Source (selecting a source) ........................10
List (operating a list menu) ..........................10
Audio/Video (setting an audio menu) ..........10
System (setting a system menu) .................10
Radio ..........................................................11
Radio menu .................................................11
Band selecting ............................................. 11
Manual tuning (step by step) .......................11
Seeking .......................................................11
Storing and recalling stations ......................11
LOC/DX (local / distant seek tuning) ...........11
USB playback ...........................................12
Playing les on a USB storage device ........12
Stopping playback of les on a USB storage
device ..........................................................12
List menu ..................................................... 12
Selecting le category .................................12
Selecting a folder ........................................12
Selecting a le (chapter) .............................12
Playing audio les .......................................12
Playing photo les .......................................13
Playing video les .......................................13
Playing DivX® VOD content ......................... 13
Disc playback ............................................14
Insert a disc .................................................14
Eject the disc ...............................................14
Disc playback ..............................................14
Stop playback temporarily ...........................14
Stop playback entirely .................................14
Select desired track ..................................... 14
Fast forward/backward during playback ...... 14
Random track playback (for CD/VCD/MP3/
WMA Only) ..................................................14
Repeat .........................................................14
Repeat A - B ................................................ 14
GOTO ..........................................................15
PBC - Playback control ( for VCD 2.0 or up) ...15
DVD audio select ........................................15
VCD audio select ........................................15
DVD subtitle select ......................................15
DVD title select ........................................... 15
DVD angle select ........................................15
Zoom ...........................................................15
Bluetooth Operation ................................16
Pairing .........................................................16
Main menu ..................................................16
Music display ............................................... 16
Making a call ...............................................16
Answering a call ..........................................16
Transfer the call ..........................................17
Call from Phonebook ................................... 17
Audio Streaming Operations .......................17
What is audio streaming? ............................ 17
Play / Pause a track ....................................17
Selecting a track .......................................... 17
APP Operation ..........................................18
Main menu ..................................................18
Select desired track ..................................... 18
Fast forward/backward during playback ...... 18
Information for compatibility of connected
devices ........................................................18
iPod/iPhone Playback ...............................19
Main Menu ..................................................19
Stop playback temporarily ...........................19
Select desired track/chapter ........................ 19
Fast forward/backward ................................19
Control an iPod/iPhone from its unit (Control
iPod mode) ..................................................19
System setup .............................................20
Setting menu ...............................................20
General .......................................................20
Language ....................................................21
Radio ...........................................................21
Bluetooth .....................................................21
Audio Setting .............................................22
Video setting .............................................. 22
Other Function ..........................................22
Using an AUX source ..................................22
Using an AV source ....................................22
Installation ........................................23
Connecting the unit ..................................23
Wiring diagram ............................................25
Installation .................................................26
Before installing this unit .............................26
Control Cables ............................................26
Mounting sleeve installation ........................26
Kit installation ..............................................27
ISO installation ............................................28
Fuse ............................................................28
Reconnect battery .......................................28
Remove the Unit ........................................28
Additional information .....................29
Troubleshooting .......................................29
Error messages .........................................30
Handling guidelines ..................................31
Specications ............................................37
3
01
English
Section
En
IMPORTANT SAFEGUARDS
Please read all of these instructions
regarding your display and retain them for
future reference.
1 Read this manual fully and carefully
before operating your display.
2 Keep this manual handy as a
reference for operating procedures
and safety information.
3 Pay close attention to all warnings
in this manual and follow the
instructions carefully.
4 Do not allow other persons to use
this system until they have read
and understood the operating
instructions.
5 Do not install the display where it
may (i) obstruct the driver’s vision,
(ii) impair the performance of any of
the vehicle’s operating systems or
safety features, including air bags,
hazard lamp buttons or (iii) impair
the driver’s ability to safely operate
the vehicle.
6 Do not operate this display if doing
so in any way will divert your
attention from the safe operation of
your vehicle. Always observe safe
driving rules and follow all existing
trafc regulations. If you experience
difficulty in operating the system
or reading the display, park your
vehicle in a safe location and make
necessary adjustments.
7 Please remember to fasten your
seat belt at all times while operating
your vehicle. If you are ever in
an accident, your injuries can be
considerably more severe if your
seat belt is not properly buckled.
8 Never use headphones while driving.
9 To promote safety, certain functions
are disabled unless the parking
brake is on, and the vehicle is not in
motion.
10 Never set the volume of your display
so high that you cannot hear outside
trafc and emergency vehicles.
WARNING
Do not attempt to install or service
your display by yourself. Installation
or servicing of the display by persons
without training and experience in
electronic equipment and automotive
accessories may be dangerous and
could expose you to the risk of electric
shock or other hazards.
To ensure safe driving
WARNING
• LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO
DETECT PARKED STATUS AND
MUST BE CONNECTED TO THE
POWER SUPPLY SIDE OF THE
PARKING BRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD
MAY VIOLATE APPLICABLE LAW AND
MAY RESULT IN SERIOUS INJURY OR
DAMAGE.
• To avoid the risk of damage and injury
and the potential violation of applicable
laws, this unit is not for use with video
that is visible to the driver.
• To avoid the risk of accident and the
potential violation of applicable laws, no
viewing of front seat video should ever
occur while the vehicle is being driven.
• In some countries or states the viewing
of images on a display inside a vehicle
even by persons other than the driver
may be illegal. Where such regulations
apply, they must be obeyed.
When you attempt to watch a video image
while driving, the warning "Viewing of front
seat video source while driving is strictly
prohibited." will appear on the front display.
To watch a video image on the front display,
park your vehicle in a safe place and apply
the parking brake.
When using the rear view camera
With an optional rear view camera, this unit
can be used as an aid to keep an eye on
trailers, or when backing into a tight parking
spot.
Precautions
4
01
Section
En
Precautions
To avoid battery exhaustion
Keep the vehicle engine running when
using this unit to avoid draining the battery
power.
• When no power is supplied to this unit,
such as when the vehicle battery is
being replaced, the microcomputer of
this unit returns to its initial condition. We
recommend that you transcribe the audio
adjustment data.
WARNING
Do not use with vehicles that do not feature
an ACC position.
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: THE USE OF OPTICAL
INSTRUMENTS WITH THIS PRODUCT
WILL INCREASE EYE HAZARD.
CAUTION
This product is a class 1 laser product
classified under the Safety of laser
products, IEC 60825-1:2007.
FCC STATEMENT
1. This device complies with Part 15 of the
FCC Rules.Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interferencethat may
causeundesired operation.
2. Changes or modifications not expressly
approved by the party responsible
forcompliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for aClass
B digital device, pursuant to Part 15 of
the FCC Rules. These limits aredesigned
to provide reasonable protection against
harmful interference in aresidential
installation.
This equipment generates uses and can
radiate radio frequency energy and,if not
installed and used in accordance with the
instructions, may causeharmful interference
to radio communications. However, there
is noguarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or televisionreception, which can
bedetermined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
ofthe following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that towhich
the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator & your
body
5
02
English
Section
En
Before you start
About this unit
CAUTION
• Do not allow this unit to come into
contact with liquids. Electrical shock
could result. Also, damage to this unit,
smoke, and overheating could result from
contact with liquids.
• Keep this manual handy for future
reference.
• Always keep the volume low enough to
hear outside sounds.
• Avoid exposure to moisture.
• If the battery is disconnected or
discharged, any preset memory will be
erased.
Note
Function setting operations are completed even if
the menu is cancelled before the operations are
conrmed.
In case of trouble
Should this product fail to operate properly,
please contact your dealer or nearest
authorized Pioneer Service Station.
Resetting the microprocessor
The microprocessor must be reset in the
following situations:
• Before using this unit for the first time
after installation
• If the unit fails to operate properly
• When strange or incorrect messages
appear on the display
1 Press the (page 6, ) button on the top
right of the front panel to ip down it.
2 Press [RESET] with a pen tip or other
pointed instrument.
Disable the demonstration mode
The demonstration mode should be turned
off as in the following process.
- Press the SRC key to turn on this unit.
- Press and hold the SEL key to display
Setting menu.
- Select General menu and then choose
Demo.
- Select Off and then press the center of
Multi Control to set the Demo mode off.
- Press the ESC key to deselect the
Setting menu.
The demonstration mode is also disabled
automatically by turning ignition key on and
off.
RESET
6
03
Section
En
Operating this unit
Part Operation
• Panel open
MUTE
• Mute on/off
• Enter the source menu (2
sec.)
• Return to main source
menu (2 sec.), use [ ]
(Left) / [ ] (Right) button
on the front panel or [ ] /
[ ] button on the remote
control to select the desired
mode, and press [M.C.]
button on the front panel
or [ENTER] button on the
remote control to conrm.
SRC
• Power off (2 sec.)
• Select playing mode:
• Radio
• Disc (when disc inserted)
• USB storage device/
iPod/iPhone (when USB
storage device/iPod/iPhone
connected)
• AUX-IN (front audio
& video input. External
peripheral devices with
RCA audio and video
outputs can be connected
with the unit.)
• AV Input (rear audio
& video input. External
peripheral devices with
RCA audio and video
outputs can be connected
with the unit.)
• BT
• APP
Press the [ ] button to ip down the front panel.
7
03
English
Section
En
Operating this unit
Part Operation Part Operation
BSM
• Preset scan (in Radio
mode)
• Best Stations Memory (2
sec.) (in Radio mode)
• Stop playback
• Reject the incoming call
or hang up the current
conversation
BAND
• Play/Pause (in DVD, CD
and MP3/WMA modes)
• Band switch (in Radio
mode)
(Left)
• Search the previous station
automatically (press more
than 2 seconds) (in Radio
mode).
• Search the previous station
manually (in Radio mode).
• Search the previous track
or chapter (in CD, MP3/
WMA, and DVD video
mode).
• Fast backward by 2, 4, 8,
16 step (2 sec.) (in CD,
MP3/WMA and DVD video
mode).
• Navigate left among option
items
MULTI-
CONTROL
(M.C.)
• Adjust volume level (rotate).
• Conrm operation (press).
• Stop auto seeking (in Radio
mode) (press).
(Down)
• Navigate down among
option items (in DVD, CD
and MP3/WMA modes)
• Play the previous preset
radio station (in Radio
mode)
(Right)
• Search the next station
automatically (press more
than 2 seconds) (in Radio
mode).
• Search the next station
manually (in Radio mode).
• Search the next track or
chapter (in CD, MP3/WMA,
and DVD video mode).
• Fast forward by 2, 4, 8,
16 step (2 sec.) (in CD,
MP3/WMA and DVD video
mode).
• Navigate right among
option items
ESC
• Cancel source select menu
and return to previous
menu
• When play back videos,
press to show information.
• Display off (press 2 sec.)
Press any button to
resume.
Music display
On BT main menu, press the
[ESC] button
to display the music interface,
press [ESC]
again to return the BT main
menu.
• Remote sensor
• AV in
AUX input jack (3.5mm
stereo/video jack)
Use to connect an auxiliary
device.
• USB port
(Up)
• Navigate up among option
items (in DVD, CD and
MP3/WMA modes)
• Play the next preset radio
station (in Radio mode)
SEL
• Audio/video Setting (press).
• Setting menu (press 2
sec.).
• 3.5 inch TFT display
• USB port
• Disc loading slot
• Eject button
RESET • RESET
CAUTION
• Use an optional Pioneer USB cable (CD-U50E)
to connect the USB audio player/USB memory
as any device connected directly to the unit
will protrude out from the unit and may be
dangerous.
• Connect an optional iPod/iPhone (30-pin
connector) to the unit by iPod/iPhone cable
(CD-IU51).
Connect the USB port to the USB connector on
the front of the panel
• Connect an optional iPod/iPhone (Lightning
connector) to the unit by iPod/iPhone cable
(CD-IU52).
Connect the USB port to the USB connector on
the front of the panel
• Do not use unauthorized products.
8
03
Section
En
Operating this unit
Part Operation
• Power on/off.
SRC
• Play source selection.
• Return to main source
menu (2 sec.).
ANGLE/
VIDEO
• Select a difference angle/
version of the current DVD
scene.
• Show video list.
SUB
TITLE/
PHOTO
• Select DVD or DivX subtitle
language.
• Show photo list.
ZOOM • Enlarge or reduce picture
or active image size.
TITLE • Enter DVD title menu.
• Menu cursor.
ENTER
• Enter
• Connect or disconnect
HFP/A2DP. (press 2 sec.)
• Answer the incoming call.
• Dial out
/
• Press to stop playback.
• Reject the incoming call
or hang up the current
conversation.
A B • Repeat A-B
• Fast forward
• Press to pause or resume
playback.
• Switch the HFP voice
between unit and HFP
device.
/
SEEK +
• Next track/chapter.
• Seek station by step.
• Seek the next available
station. (2 sec.)
DISP/
BSM
• Display playback
information.
• Radio preset scan / Radio
auto preset.
1-9 • Digit buttons
G / # • Goto search
• Input "#".
VOLUME
+/-
• Press to increase or
decrease volume.
MUTE • Press to mute. Press again
to unmute.
AUDIO/
MUSIC
• Switch audio channel.
• Switch DVD audio language
• Show music list.
MENU/
PBC
• Access DVD menu.
• Access PBC menu (for
VCD 2.0 or up)
ESC • Exit the current menu, and
return to last menu.
SETUP • Enter setting menu.
RDM • Enable/disable random
playback.
RPT • Enable/disable repeat
playback.
SEL • Enter audio/video setting
menu
• Fast reverse
BAND • Select tuner band.
/
SEEK -
• Previous track/chapter.
• Press to seek the previous
station.
• Seek the previous available
station. (2 sec.)
0 / • Input number "0".
• Input "+".
C / • Clear the input number.
• Input " ".
9
03
English
Section
En
Basic operations
Important
• Handle gently when removing or
attaching the front panel.
• Avoid subjecting the front panel to
excessive shock.
• Keep the front panel out of direct sunlight
and high temperatures.
• To avoid damaging the device or vehicle
interior, remove any cables and devices
attached to the front panel before
detaching it.
Removing the front panel to
protect your unit from theft
1 Press the (page 6, ) button to flip
down the front panel.
1
2 Grab the left side of the front panel, push
it to the right, then pull it out.
2
* The indicator light ashes after the panel
removed.
3 Always keep the detached front panel in
a protection device such as a protection
case.
Re-attaching the front panel
1 Grab the left side of the front panel, push
it to the right, then push it in until it clicks.
1
Make sure that the front panel has been
properly connected to the main unit.
2 Press the upper left end of the front
panel until it is rmly seated.
2
• If you can’t attach the front panel to the
main unit successfully, try again. Forcing
the front panel into place may result in
damage.
Turning the unit on
Press [SRC] button to turn the unit on.
Turning the unit off
Press and hold [SRC] until the unit turns
off.
Selecting a source
Press [SRC] to cycle between:
Radio (tuner)—Disc (when disc
inserted)—USB storage device/iPod/
iPhone (when USB storage device/
iPod/iPhone connected)—AUX (AUX-
IN cannot carry out a source selection,
unless it turns ON AUX by Setting
menu.)—AV Input (AV-IN cannot carry
out a source selection, unless it turns
ON AV Input by Setting menu. )—BT
(Bluetooth)—APP
Adjusting the volume
Turn [M.C.] to adjust the volume. Turn
counterclockwise to decrease and
clockwise to increase the volume.
Operating this unit
10
03
Section
En
Use and care of the remote
control
Using the remote control
Point the remote control in the direction of
the front panel to operate.
When using for the rst time, pull out the
lm protruding from the tray.
Replacing the battery
Slide the tray on the back of the remote
control out and insert the battery with
the plus (+) and minus (–) poles aligned
properly.
• When using for the rst time, pull out the
lm protruding from the tray.
CR2025(3V)
WARNING
• Keep the battery out of the reach of
children.
Should the battery be swallowed, consult
a doctor immediately.
• Batteries (battery pack or batteries
installed) must not be exposed to
excessive heat such as sunshine, re or
the like.
CAUTION
• Remove the battery if the remote control
is not used for a month or longer.
• There is a danger of explosion if the
battery is incorrectly replaced. Replace
only with the same or equivalent type.
• Do not handle the battery with metallic
tools.
• Do not store the battery with metallic
objects.
• If the battery leaks, wipe the remote
control completely clean and install a
new battery.
• When disposing of used batteries,
comply with governmental regulations or
environmental public institutions’ rules
that apply in your country/area.
Important
• Do not store the remote control in high
temperatures or direct sunlight.
• The remote control may not function
properly in direct sunlight.
• Do not let the remote control fall onto
the oor, where it may become jammed
under the brake or accelerator pedal.
Basic menu operations
Source (selecting a source)
1 Press and hold [SRC] button to display
the home menu.
2 Use [ ] (Left) / [ ] (Right) button on
the front panel or [ ] / [ ] button on
the remote control to select the desired
source.
Press [M.C.] button on the front panel or
[ENTER] button on the remote control to
select.
List (operating a list menu)
Press [ESC] to display the list menu (in
MP3/WMA/CD-DA mode) (page 12).
Audio/Video (setting an audio
menu)
Press [SEL] to display the audio/Video
menu.
Refer to Audio Adjustments (page 20).
System (setting a system menu)
Press and hold [SEL] more than 2 seconds
to display the system menu.
Refer to System settings (page 19).
Operating this unit
11
03
English
Section
En
Radio
Radio menu
Radio
POWERFUL
Source indicator
Time
Band
Preset station Number
Sound effect indicator
Frequency
Band selecting
Press [ BAND ] button repeatedly to
select desired band. The band indicator
(FM1, FM2, FM3 or AM) will be displayed.
Manual tuning (step by step)
Press the [ ] (Left) or [ ] (Right) button
to tune step by step.
Seeking
1 Press and hold the [ ] (Left) or [ ]
(Right) button more than 2 seconds to
seek previous/next available station.
2 You can cancel seek tuning by press
[M.C.] or [ ] (Left) / [ ] (Right) button.
Storing and recalling stations
You can easily store up to six stations for
each band as presets.
Storing a preset station manually
1 Tune to a desired station as above
method.
2 Press and hold [M.C.] button until the
preset station flashes on the screen,
press [ ] (Up) or [ ] (Down) button to
select a preset number, then press [M.C.]
button to store it.
You may also do the operation by the
remote control as following step:
Press and hold a number button (1-6) on
the remote control, the current station will
be stored in the memory.
Storing a preset station automatically
BSM (best stations memory) automatically
stores the 6 strongest stations of each
band, the unit can store 24 stations in total.
Best stations memory
1 Press and hold [ BSM] button more
than 2 seconds to search and store
stations. During searching and storing,
"BSM" appears on the display.
2 The unit will scan play the preset stations
automatically and "STATION" appears
on the display.
• To cancel, press [ BSM] button
again.
Recalling preset stations
Press [ BSM] button to scan play all
the preset stations.
LOC/DX (local / distant seek
tuning)
Local seek tuning lets you tune to only
those radio stations with sufciently strong
signals for good reception.
Distant seek tuning allows to receive all the
signals.
1 Press and hold the [SEL] button to
display the setting mode.
2 Press [ ] (Left) / [ ] (Right) button on
the front panel or [ ] / [ ] button on
the remote control to select Radio setting
menu.
3 Rotate the [M.C.] or press [ ] (Down)
button on the front panel or [ ] button
on the remote control to move the cursor
to LOC DX option.
4 Press [M.C.] or [ENTER] button to spread
the sub-menu.
5 Rotate the [M.C.] or press [ ] (Up) / [ ]
(Down) button on the front panel or [ ] /
[ ] button on the remote control to
select desired option.
6 Press [M.C.] or [ENTER] button to conrm.
Operating this unit
12
03
Section
En
Operating this unit
USB playback
Playing les on a USB storage
device
1 Open the USB port cover.
2 Plug in the USB storage device using a
USB cable.
3 The unit will switch to USB mode
and load the files in the USB device
automatically.
Stopping playback of les on a
USB storage device
• Switch to other mode.
• Disconnect the USB storage device.
List menu
The unit will enter list menu after connecting
the USB storage, it will enter playing audio
files automatically after 15 seconds, press
[ESC] button to return to list menu.
Source indicator
Current track number/Total track
number
Time
Playback status indicator
Audio list indicator
Photo list indicator
Video list indicator
File list
Selecting le category
The unit will enter le list after loading the
storage, press [ ] (Left) button on the
front panel or [ ] button on the remote
control to return to le type selecting.
Press [ ] (Up) / [ ] (Down) button on the front
panel or [ ] / [ ] button on the remote
control to select file category (Audio, Photo,
Video), press [M.C.] or [ENTER] to conrm.
Selecting a folder
1 Press [ ] (Up) / [ ] (Down) or [ ] / [ ]
button to select a folder (if there are
folders in the storage), press [M.C.] or
[ENTER] to conrm.
2 To nd a sub-folder, repeat above step.
Selecting a le (chapter)
In le list menu, press [ ] (Up) / [ ] (Down)
or [ ] / [ ] button to select a le, press
[M.C.] or [ENTER] button, the unit will load
the le and start playback.
Selecting a le of other folder:
1. If there are more than 1 folder in the
storage, a folder icon appears upon the
le’s names, press [ ] (Up) / [ ] (Down)
or [ ] / [ ] button to select it and press
[M.C.] or [ENTER] button to show all the
folders.
2. Press [ ] (Up) / [ ] (Down) or [ ] / [ ]
button to select a folder and press [M.C.]
or [ENTER] button to show the files in
the folder.
Playing audio les
POWERFUL
Track information
Repeat and Random information
Sound effect indicator
Elapsed time/Total time of the track
• In playback menu, press [ESC] button to
return to upper category.
Play/Pause
Press [ BAND] button on the front
panel or [ ] button on the remote
control to play/pause.
13
03
English
Section
En
Operating this unit
Previous/next track
Press [ ] (Left) or [ ] (Right) button to
go to previous or next track.
Fast forwarding or reversing
Press and hold [ ] (Left) or [ ] (Right)
button more than 2 seconds to fast
backward/forward by 2, 4, 8, 16 step.
Back to list menu
Press [ESC] button to back to list menu.
Playing photo les
Play/Pause
Press [ BAND] or [ ] button to
play/pause.
Previous/next photo
Press [ ] (Left) or [ ] (Right) button to
go to previous or next photo.
Rotating photo
Press [ ] button to rotate the photo 270°
-> 180° -> 90°, press [ ] button to rotate
the photo 90° -> 180° -> 270°, each press
to rotate the photo 90°, press [ ] (Up) / [ ]
(Down) or [ ] / [ ] button to rotate the
photo 180°.
Back to list menu
Press [ BSM] button to back to list
menu.
Playing video les
Play/Pause
Press [ BAND] or [ ] button to
play/pause.
Previous/next chapter
Press [ ] (Left) or [ ] (Right) button to
go to previous or next chapter.
Fast forwarding or reversing
Press and hold [ ] (Left) or [ ] (Right)
button more than 2 seconds to fast
backward/forward by 2, 4, 8, 16 step.
Back to list menu
Press [ BSM] button to back to list
menu.
Notes
• Disconnect USB storage devices from the unit
when not in use.
• It will take several minutes when playing
external storage devices that contain a mixture
of various media le types.
• Use an optional Pioneer USB cable (CD-U50E)
to connect the USB audio player/USB memory
as any device connected directly to the unit
will protrude out from the unit and may be
dangerous.
• Do not use unauthorized products.
Playing DivX® VOD content
Some DivX® VOD (video on demand)
content may only be playable a fixed
number of times.
When you attempt to play back this type of
content saved on an external storage
device, the remaining number of times it
can be played is shown on-screen. You can
then decide whether or not to play back the
contents of the external storage device.
• If there is no limit to the number of times
the DivX® VOD content can be viewed,
then you may insert the external storage
device into your player and play the
content as often as you like, and no
message will be displayed.
• You can conrm the number of times that
the content can be played by checking
the number displayed after Remaining
Views.
Important
• In order to play DivX® VOD contents
on this unit, you first need to register
the unit with your DivX® VOD contents
provider. For details on your registration
code, refer to Displaying the DivX® VOD
registration code .
• DivX® VOD content is protected by
a DRM (Digital Rights Management)
system. This restricts playback of content
to specic, registered devices.
If a message is displayed after inserting the
external storage device containing DivX®
VOD content, use M.C. to select a desired
mode.
Turn to change the mode. Press to select.
• Play – Playback of the DivX® VOD
content
• Next Play – Skip to the next le
• Stop – If you do not want to play the
DivX® VOD content
14
03
Section
En
Disc playback
Insert a disc
1 Press (page 6, ) button to ip down the
panel.
2 Insert a disc into the disc loading slot
(page 6, ).
3 Close the panel, and the unit will change
to disc mode automatically.
Notes
•
Please confirm whether there is a disc in
the unit before you insert another one.
•
The unit will exit current playing source
and enter DVD mode when one disc is
inserted.
• The following format disc will be support:
CD-R,CD-RW, DVD-R, DVD+R, DVD-
RW,DVD + RW .
Eject the disc
1 Press (page 6, ) button to ip down the
panel.
2 Press [ ] button (page 6, ) to eject
the disc.
3 Close the panel.
Notes
• After ejecting the disc, the unit reverts to other
mode automatically.
• You can eject a disc when the unit powered
off. The unit remains off after the disc ejected.
• If the disc is not removed from the unit within
10 seconds, the disc will be reloaded to
prevent accidental damage.
Disc playback
1 When a disc is inserted, display shows
"Loading". For MP3/WMA or disc with
mixed files, reading time may exceed 1
minute.
2 While audio/photo/video files playback,
list menu will appear on the display. The
list menu and operations are the same
with USB playback (page 12).
Stop playback temporarily
- During playback, press [ BAND] or
[ ] to pause playback.
- The sound will be muted.
- Display shows "PAUSE".
Press [ BAND ] or [ ] again to
continue playback.
To resume normal play, repeat the
operation.
Stop playback entirely
1 During playback, press [ BSM]
button once to stop the playback and
the relevant location on the disc is
saved, press [ BAND] or [ ] to
resume the playback from the saved disc
location.
2 Press [ BSM] twice to cease the
playback. Press [ BAND] or [ ]
to start the playback from the very
beginning the Title page of the DVD or
the rst track of VCD / CD.
Select desired track
- Press [ ] (Left) or [ ] (Right) button
to skip to the previous/next track.
Fast forward/backward during
playback
Press [ ] (Left) or [ ] (Right) button for
more than 2 seconds repeatedly to select
X2, X4, X8, X16 to fast backward or forward
track during playback.
- During the fast forward or backward
operation, press [ BAND] or [ ]
briey to playback again.
- During the fast forward or backward
operation, the volume will be muted.
Random track playback (for CD/
VCD/MP3/WMA Only)
You can play all the tracks in random order.
1 During playback, press [RDM] button on
the remote control unit to select random
playback.
2 Press [RDM] button again to select
normal playback.
Repeat
During playback, press [RPT] button on
the remote control unit to select repeat
playback.
Repeat A - B
Select desired passage to repeat playback.
- Press [A->B] on the remote control once
to select starting point.
- Press [A->B] again to select ending point,
selected passage start to replay.
- Press [A->B] once again to exit.
Operating this unit
15
03
English
Section
En
GOTO
Goto desired title/chapter or time point
directly of video.
1 Press [ G ] (GOTO) button on the remote
control, search menu display on top of
the screen.
2 Use [ ] (Up) / [ ] (Down) button on the
front panel or [ ] / [ ] button on the
remote control to select Title, Chapter or
Time, if necessary.
The options of the search menu depends
on the video type, it maybe display only
one or two of the options.
3 Use [ ] or [ ] button to select desired
title/chapter or input the number by digit
buttons.
4 Press [M.C.] or [ENTER] button to conrm.
PBC - Playback control ( for VCD
2.0 or up)
1 If you insert a VCD with PBC, press
[ MENU/PBC ] button to set the PBC On/
Off.
2 When PBC is set to Off, playback starts
from the beginning of the 1st track
automatically.
3 When PBC is set to On, the PBC
menu will be displayed, use navigation
buttons or digit buttons to select
desired track, press [M.C.] or [ENTER]
button to confirm the playback, then the
PBC will be set to Off automatically.
DVD audio select
Press [AUDIO/MUSIC] button to select
audio language to listen if the DVD has
multiple audio languages.
VCD audio select
Press [AUDIO/MUSIC] button to select
audio channel to listen (L, R, Stereo).
DVD subtitle select
Press [SUBTITLE/PHOTO] button to select
the subtitle language to show if the DVD
has multiple language subtitles.
DVD title select
Press [TITLE] button to display title or
chapter list, use [ ] (Up) / [ ] (Down) button
on the front panel or [ ] / [ ] / [ ] / [ ]
button on the remote control or digit number
to select, press [M.C.] or [ENTER] button to
play.
DVD angle select
Press [ANGLE/VIDEO] button to select
different angle to view if the DVD has
multiple-angle views.
Zoom
Press [ZOOM] button, the picture will be
zoomed accordingly.
Operating this unit
16
03
Section
En
Operating this unit
Bluetooth Operation
The Bluetooth allows you to utilize your car’s
built-in audio system for wireless mobile
phone or music handsfree communication.
Some Bluetooth mobile phones have the
audio features, and some portable audio
players support Bluetooth feature. This
system can play audio data stored in a
Bluetooth audio device. The car stereo with
Bluetooth will be able to retrieve phonebook
contacts, received call, dialled call, missed
call, incoming calls, outgoing call and listen
to music.
Notes
• Do not leave the microphone of Bluetooth
handsfree in the places with wind passing such
as air outlet of the air conditioner, etc. This may
cause a malfunction.
• If leave it in the places subjected to direct
sun, high temperature can cause distortion,
discoloration which may result in a malfunction.
• This system will not operate or may operate
improperly with some Bluetooth audio players.
• The unit cannot guarantee the compatibility of
all mobile phones together with the unit.
Pairing
1 Switch the Bluetooth on in the system
setting menu. (see page 20 <System
setup> <Bluetooth>)
2 Turn on Bluetooth function of your mobile
phone.
3 Enter mobile phone’s Bluetooth setup
menu.
4 Search for new Bluetooth devices.
5 Select DVH-885AVBT from the pairing
list on the mobile phone, and paired
automatically.
6 After pairing successfully, the unit
will show "HFP: Connected", "A2DP:
Connected".
If the connection doesn't establish after
pairing, Use [ ] (Up) / [ ] (Down) button
on the front panel or [ ] / [ ] button
on the remote control to select HFP or
A2DP, then press and hold [M.C.] button
to connect it manually.
Notes
• The unit only pair one mobile phone, and only
memry the last pair device.
When power on, only search the last pair
device.
• All HFP function sources can connect; A2DP
function only can connect the BT source and
APP source, enter other source will disconnect
automatically, and switch BT source again will
paired automatically.
Main menu
Press the [SRC] button to switch the source
to "BT".
"BLUETOOTH" must be ON to access to
the BT source.
Menu List
Galaxy S5
Source indicator
Device name
Time
Status indicator
HFP/A2DP status
transmit/arrive Information
Indication message
Music display
On BT main menu, press the [ESC] button
to display the music interface, press [ESC]
again to return the BT main menu.
Note
• The display information only includ:
Char Title、Char Artist、Char Album、Total
time、Play time.
Making a call
Press the [SRC] button to switch the source
to "BT". Input numbers by remote control
then press [M.C.] button on the front panel
or [ENTER] button on the remote control to
dial out.
Answering a call
You can answer an incoming call by
pressing the [M.C.] or [ENTER] button.
* Press [ BSM] button on the front
panel or [ ] button on the remote control
to hang up the current conversation or
reject an incoming call.
17
03
English
Section
En
Operating this unit
Transfer the call
Press [ BAND] button on the front
panel or [ ] button on the remote
control to switch the HFP voice between
unit and HFP device.
Note
Some cellular phones may not be able to transfer
the Phone Book data.
Call from Phonebook
Press and hold [ BSM] button on the
front panel or [ ] button on the remote
control will toggle between BT main menu
and phone book menu when BT device is
connected, if BT is not connected, the menu
could not be switched to phone book menu.
Galaxy S5
Phone book list
Use [ ] (Up) / [ ] (Down) button on the front
panel or [ ] / [ ] button on the remote
control to select from:
1 Missed Calls
2 Received Calls
3 Dialed Calls
4 Phone Book
Press [M.C.] button on the front panel or
[ENTER] button on the remote control to
loading the data, then the numbers list on
the display.
Use [ ] (Up) / [ ] (Down) button on the front
panel or [ ] / [ ] button on the remote
control to select a number, press [M.C.]
button on the front panel or [ENTER] button
on the remote control to dial out.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for
transferring audio data such that it can be
processed as a steady and continuous
stream. Users can stream music from their
external audio player to their car stereo
wirelessly and listen to the tracks through
the car’s speakers. Please consult your
nearest dealer for more information on
the product of wireless audio streaming
transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
on the song playback.
Audio streaming may or may not resume
after telephone interrupt as this is
dependent on mobile phone.
System will always return to Radio mode
if audio streaming is disconnected.
Note
Be sure to read the chapter "Pairing" before
proceeding.
Play / Pause a track
1. Press the [ BAND] button to pause
audio playback.
2. To resume audio playback, press the
[ BAND] button again.
Selecting a track
Track-up
1. Press the [ ] (Right) button on the front
panel or [ ] button on the remote to
move to the beginning of the next track.
2. Each time the [ ] (Right) or [ ]
button is pressed, playback proceeds to
another track in the advancing direction.
Track-down
1. Press the [ ] (Left) on the front panel or [
] button on the remote to move the to
beginning of the previous track.
2. Each time the [ ] (Left) or [ ]
button is pressed, playback proceeds to
previous track in the reverse direction.
Note
Playing order will depend on Bluetooth audio
player. When [ ] (Left) or [ ] button is
pressed, some A2DP devices will restart the
current track depends on the duration of playback.
18
03
Section
En
Operating this unit
APP Operation
Starting procedure for Android
device users
Connect your Android device to this unit
using Bluetooth wireless technology.
To use the CarMediaPlayer with the
compatible Pioneer product, AppRadio app
should be installed.
AppRadio app can be downloaded from
Google Play.
Main menu
1 Press the [SRC] button to switch the
source to "APP".
"BLUETOOTH" must be ON to access to
the BT source.
2 Select [CarMediaPlayer] to enter.
POWERFUL
Source indicator
Time
Track information
Sound effect indicator
Elapsed time/Total time of the track
Play/Pause
Play/Pause
Press [ BAND] button on the front
panel to play/pause.
Select desired track
Press [ ] (Left) or [ ] (Right) button to
skip to the previous/next track.
Fast forward/backward during
playback
Press [ ] (Left) or [ ] (Right) button for
more than 2 seconds to fast backward or
forward track during playback.
- During the fast forward or backward
operation, undo the button to playback
again.
Information for compatibility of
connected devices
The following is the detailed information
regarding the terminals required to use the
application for smartphone on this unit.
For smartphone users
• The device has Android OS 2.3 or later.
• The device supports Bluetooth SPP
(Serial Port Prole) and A2DP (Advanced
Audio Distribution Prole).
The device is connected to this unit via
Bluetooth.
• Compatibility with all Android devices is
not guaranteed.
Notes
• Pioneer is not liable for any issues that may
arise from incorrect or flawed app-based
content.
• The content and functionality of the supported
applications are the responsibility of the App
providers.
19
03
English
Section
En
Operating this unit
Fast forward/backward
Press the [ ] (Left) / [ ] (Right) button
on the front panel for more than 2 seconds
to fast backward or forward track during
playback.
- During the fast forward or backward
operation, press [ BAND] or [ ]
briey to playback normally again.
- During the fast forward or backward
operation, the volume will be muted.
Control an iPod/iPhone from its
unit (Control iPod mode)
- Press and hold [ BAND] to switch to
the Control iPod mode.
- Press and hold [ BSM] to cancel the
mode.
- The following operations cannot be
performed from the unit, when the control
iPod mode is activated.
- Play, pause, stop, fast forward/
backward
- The volume/mute function can only be
performed from the unit.
Note
The iPod or iPhone couldn't be charged
through the unit after the unit turned off.
iPod/iPhone Playback
Connect an optional iPod or iPhone to the
unit by iPod/iPhone cable. Connect the USB
port to the USB connector on the front of
the panel.
When connecting a device, the unit will read
the les automatically. The track information
display on the screen once playback start.
Main Menu
Press the [SRC] button to switch the source
to "iPod".
No Title
No Artist
No Album
ALL
POWERFUL
5
4
6
7
8
9
Source indicator
Track number
Time
Playback status indicator
Playback information
EQ indicator
Playback status
Elapsed time/Total time
9Control iPod mode indicator
Stop playback temporarily
- During playback, press [ BAND] or
[ ] button to pause playback.
- The sound will be muted.
- Press [ BAND] or [ ] again to
continue playback.
Select desired track/chapter
- Press [ ] (Left) / [ ] (Right) or [ ]
/ [ ] button to skip to the previous/next
track/chapter.
20
03
Section
En
Operating this unit
System setup
In all mode, press and hold [SEL] to enter
system setting menu.
The unit could not enter the setting menu
when the system is busy, such as loading
disc or USB.
1 Press [ ] (Left) / [ ] (Right) or [ ] / [ ]
button to select category.
2 Rotate [M.C.] or press [ ] (Up) / [ ]
(Down) or [ ] / [ ] button to select a
number, press [M.C.] or [ENTER] button
to select options, then press the [M.C.] or
[ENTER] button to spread the sub-menu.
3 Rotate the [M.C.] or press [ ] (Up) / [ ]
(Down) or [ ] / [ ] button to highlight
the desired selection, press [M.C.] or
[ENTER] to conrm.
• Pressing [ ] will return to upper
catalog.
Setting menu
Setting
Time
Category
Options
Sub-menu
General
Beep:
Turn on or off the beep sound.
Time Mode:
Select 12 Hour or 24 Hour Mode.
Time Adjust:
Press [ ] (Right) or [ ] button to switch
between hour and minute, rotate the [M.C.]
or press [ ] (Up) / [ ] (Down) or [ ] / [ ]
button to adjust.
DivX® Deactivation:
Display the DivX® activation information.
In order to play DivX® VOD (video on
demand) contents on this unit, the unit
must rst be registered with a DivX® VOD
contents provider.
DivX® Registration:
To show the DivX® registration code and
web site.
Parental control:
1 When "Enter password" appears on
the display, input a 4-digit password
by remote control (Original password:
8888), press [M.C.] or [ENTER] button
to confirm and "Correct Password"
appears.
2 Press [M.C.] or [ENTER] , then rotate
[M.C.] or press [ ] (Up) / [ ] (Down) or [ ]
/ [ ] button to select a rating level.
The rating is from 1 to 8:
(1) with the most limits when playing.
(8) with the least limits when playing.
3 Press the [M.C.] or [ENTER] button to
conrm.
Set Password:
1 When "Enter password" appears on
the display, input the old password
by remote control, press [M.C.] or
[ENTER] button to conrm and "Correct
Password" appears.
2 Press the [M.C.] or [ENTER], enter a
new 4-digit password by the remote
control, press the [M.C.] or [ENTER]
button to conrm.
3 Then input the new password again
for double confirm, press the [M.C.] or
[ENTER] button and "Set Password
Successful" appears.
• Original password: 8888
• If you forget your password, enter
original password to unlock.
Default Settings:
Load the default settings.
When the selection menu appears, press
[ ] (Left) / [ ] (Right) or [ ] / [ ]
button to select Yes or No, press [M.C.] or
[ENTER] button to conrm.
Color Key:
Select the key backlight color Blue or Red.
21
03
English
Section
En
Operating this unit
Aspect Ratio:
4:3: For 4:3 TV picture.
16:9: For 16:9 wide screen TV.
Note
There is no 16:9 specification for VCD; for VCD
the video output only in 4:3 format; in our setting
menu, 4:3 or 16:9 setting is for video monitor
setting, but not mean that DVD will output video
signal in 4:3 or 16:9 format; which means current
our TFT is in 16:9, when we play VCD, if we want
to keep the video signal without distortion, the
video should not be set to full screen like 16:9.
Mirror:
When select "On", the video of camera is
mirror image.
Camera Polarity:
Select Camera Polarity Battery, Ground or
Off.
Battery: When the polarity of the connected
lead is positive while the gear shift is in
REVERSE (R) position
Ground: When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Off: The camera polarity is disabled.
AV Input:
Select Av Input on or off.
AUX:
Select auxiliary device on or off.
Demo:
Select Demo mode on or off.
Text Scroll:
Select Text Scroll on or off.
Language
Language:
Select on-screen display language.
Subtitle:
Select subtitle language.
Options available depending on DVD disc.
Audio:
Select audio language.
Options available depending on DVD disc.
DVD Menu:
Select DVD menu language.
Options available depending on DVD disc.
Audio
Loudness:
Turn on or off the loudness.
SubWoofer:
Selecting 80Hz, 120Hz or 160Hz to activate
subwoofer-out.
Selecting subwoofer off to activate rear line-
out.
Sub Volume:
Select subwoofer volume: 0 to 33.
• Sub Volume couldn't be adjusted when
SubWoofer Off is selected.
Radio
LOC DX:
Select radio local or distant.
LOC: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
Stereo / Mono:
Select FM stereo or mono.
FM Step (FM tuning step):
Select FM step 50kHz or 100kHz
seek tuning step
• The tuning step remains at 50kHz during
manual tuning.
AM Step (AM tuning step):
Select AM step 9kHz or 10kHz
The AM tuning step can be switched
between 9kHz and 10kHz.
• When the setting is changed, the
frequency and preset channels are
initialized.
Bluetooth
Bluetooth:
If the Bluetooth is setting is On, then the
BT will be available , otherwise the BT will
never work and in disable status.
Connect:
If the Connect is set to Auto, then BT of
the unit will connect automatically with the
HFP device which is already paired in every
disconnect status (Bluetooth must be "On").
Auto Answer:
If the Auto Answer is set to Auto, then
BT of the unit will answer the in-coming
call automatically when the BT is already
connected with your HFP device( Bluetooth
must be "On"), otherwise you have to
answer the in-coming call by press answer
button of the remote or panel.
22
03
Section
En
Operating this unit
Audio Setting
Audio Setting
POWERFUL
+6 +4
Press the [SEL] button to enter audio
setting menu. First press shows current EQ.
Press [ ] (Up) / [ ] (Down) button on the
front panel or [ ] / [ ] button on the
remote control to changes EQ in this order:
POWERFUL -> NATURAL -> VOCAL
-> CUSTOM -> FLAT->SUPERBASS
To set user denition, press [SEL] button or
[ ] (Left) / [ ] (Right) button on the front
panel or [ ] / [ ] button on the remote
control to select it including: BAS(bass)/
MID(middle)/TRE(treble)/BAL(balance)/
FAD(fader), press [ ] / [ ] button on the
remote control to adjust value.
Video setting
Video Setting
BRI CON SAT
At Audio setting menu, press [ ] (Left) /
[ ] (Right) or [ ] / [ ] button
repeatedly until Video Setting menu
displayed.
Press [ ] (Left) / [ ] (Right) or [ ] / [ ]
button to select it including: BRI/CON/SAT,
press [ ] (Up) / [ ] (Down) or [ ] / [ ]
button to adjust value.
* Rear monitor is not adjustable.
Note
Video setting is adjustable for this product display
only, it is not adjustable when video output to the
other devices display.
Other Function
Using an AUX source
A separately sold auxiliary device such as a
VCR or portable device can be connected
to this unit.
When connecting auxiliary device using the
front AUX input.
• You need to activate the AUX function in
the initial setting menu. Refer to previous
page.
• A portable audio/video player can be
connected by using a 3.5mm plug
(4 pole) with an RCA cable (sold
separately). However, depending on the
cable, a reverse connection between the
red (right side audio) cable and yellow
(video) cable may be required in order
for the sound and video image to be
reproduced correctly.
Using an AV source
When connecting auxiliary device using the
rear AV input.
• You need to activate the AV function in
the initial setting menu. Refer to previous
page.
• A portable audio/video player can be
connected by using a standard plug
with an RCA cable (sold separately).
However, depending on the cable, a
reverse connection between the red/
white (right/left side audio) cable and
yellow (video) cable may be required in
order for the sound and video image to
be reproduced correctly.
23
Section
04
English
En
Installation
Connecting the unit
WARNING
• To avoid the risk of accident and the
potential violation of applicable laws, no
viewing of front seat video should ever
occur while the vehicle is being driven.
• In some countries or states the viewing
of images on a display inside a vehicle
even by persons other than the driver
may be illegal. Where such regulations
apply, they must be obeyed.
WARNING
LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE
CONNECTED TO THE POWER SUPPLY
SIDE OF THE PARKING BRAKE SWITCH.
IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
CAUTION
• PIONEER does not recommend that
you install or service your display unit
yourself. Installing or servicing the
product may expose you to risk of electric
shock or other hazards.
Refer all installation and servicing of your
display unit to authorized Pioneer service
personnel.
• Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
• Do not drill a hole into the engine
compartment to connect the yellow
cable of the display unit to the vehicle
battery. Engine vibration may eventually
cause the insulation to fail at the
point where the wire passes from
the passenger compartment into the
engine compartment. Take extra care in
securing the wire at this point.
• It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or gearstick.
Be sure to install the unit in such a way
that it will not obstruct driving.
• Make sure that cables will not interfere
with moving parts of the vehicle, such
as the gearshift, parking brake or seat
sliding mechanism.
• Do not shorten any cables. If you do,
the protection circuit may fail to work
properly.
WARNING
• Use speakers over 50 W (output value)
and between 4 Ω to 8 Ω (impedance
value). Do not use 1 Ω to 3 Ω speakers
for this unit.
• The black cable is ground. When
installing this unit or power amp (sold
separately), make sure to connect the
ground wire rst. Ensure that the ground
wire is properly connected to metal parts
of the car’s body. The ground wire of the
power amp and the one of this unit or
any other device must be connected to
the car separately with different screws. If
the screw for the ground wire loosens or
falls out, it could result in re, generation
of smoke or malfunction.
Ground wire
Metal parts of car’
s body
POWER AMP
Other devices
(Another electr
onic
device in the car)
Important
• This unit cannot be installed in a vehicle
without ACC (accessory) position on the
ignition switch.
ACC position No ACC position
• Use this unit with a 12-volt battery and
negative grounding only. Failure to do so
may result in a re or malfunction.
24
04
Section
En
Installation
• To prevent a short-circuit, overheating
or malfunction, be sure to follow the
directions below.
— Disconnect the negative terminal of
the battery before installation.
— Secure the wiring with cable clamps
or adhesive tape. Wrap adhesive
tape around wiring that comes into
contact with metal parts to protect the
wiring.
— Place all cables away from moving
parts, such as the gear shift and seat
rails.
— Place all cables away from hot
places, such as near the heater
outlet.
— Do not connect the yellow cable to
the battery by passing it through the
hole to the engine compartment.
— Cover any disconnected cable
connectors with insulating tape.
— Do not shorten any cables.
— Never cut the insulation of the power
cable of this unit in order to share the
power with other devices. The current
capacity of the cable is limited.
— Use a fuse of the rating prescribed.
— Never wire the negative speaker
cable directly to ground.
— Never band together negative cables
of multiple speakers.
• When this unit is on, control signals
are sent through the blue/white cable.
Connect this cable to the system remote
control of an external power amp or the
vehicle’s auto-antenna relay control
terminal (max. 300 mA 12 V DC).
If the vehicle is equipped with a glass
antenna, connect it to the antenna
booster power supply terminal.
• Never connect the blue/white cable to
the power terminal of an external power
amp.
Also, never connect it to the power
terminal of the auto antenna. Doing
so may result in battery drain or a
malfunction.
25
Section
04
English
En
Installation
Wiring diagram
Connector
Yellow Orange
Red
Black
Blue/White
To car battery(+)
Continuous +12V DC ILLUMI (Illumination)
Ignition key +12V DC
when ON/ACC
Ground lead
Connected to a clean,
paint-free metal location
Motor/Electric antenna relay
control lead
Amplifier relay control lead
Light Green
Violet / White REVERSE SW
PARKING SW
(Active low level input)
Violet/Black
Stripe
Violet
Fuse 10A
MIC
BT ANT
Front Line out R
Rear R / Subwoofer out
CAMERA IN
Front Line out L
Rear L / Subwoofer out
VIDEO OUT (To Monitor with NTSC system)
(This output, Volume display and Mute display does not appear.)
VIDEO IN (AV)
AUDIO IN L (AV)
AUDIO IN R (AV)
SWC
(Steering Wheel Control)
RADIO ANT
26
04
Section
En
Installation
Installation
Before installing this unit
1 Disconnect battery
Before you begin, always disconnect the
battery negative terminal.
Notes
• If the unit is to be installed in a car
equipped with an on-board drive or
navigation computer, if the battery cable
is disconnected, the computer memory
may be lost. Under these conditions, use
extra caution during installation to avoid
causing a short circuit.
• When installing, to ensure proper heat
dispersal when using this unit, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
5cm
Leave ample
space
5 cm
5 cm
2 Remove transport screws
Important
Remove these two transport screws before
installation. Otherwise, the disc player will
not work.
3 Remove unit from sleeve
Lift latches on both sides of sleeve to
remove half-sleeve from the unit.
Control Cables
Auto Brightness Control
To avoid the display being too bright at night
time, if the headlight cable is connected to
ILLUMI, turning on the headlight will dim the
backlight of the TFT LCD and vice versa.
Reverse Driving
If a rear view camera is connected with
the unit, the playing source switches to
CAMERA automatically when you start
reverse driving.
As the reverse driving is done, the playing
source switches to the previous.
Parking Brake
1 If "PARKING SW" cable is connected to
hand brake switch, video display on the
TFT monitor will be controlled by this
function. Parking cable function ceases
when the playing source is CAMERA.
2 The monitor displays the black screen
with warning information to prevent the
driver watching video contents during
driving, but the passengers at the rear
seat can watch video contents normally.
Mounting sleeve installation
1 Slide the mounting sleeve off the
chassis. If it is locked into position, use
the removal tools (supplied) to disengage
it.
2 Check the dashboard opening size by
sliding the mounting sleeve into it.
If the opening is too small, carefully cut or
file as necessary until the sleeve easily
slides into the opening. Do not force
the sleeve into the opening or cause
it to bend or bow. Check for sufficient
space behind the dashboard for the unit
chassis.
This unit can be installed in any
dashboard with a suitable 183 mm (W) x
53 mm (H) opening as shown above. The
dashboard should be 4.75 mm to 5.56
mm thick in order to be able to support
the unit.
3 Locate the series of bend tabs along the
top, bottom, and sides of the mounting
sleeve. With the sleeve fully inserted into
the dashboard opening, bend as many of
the tabs outward as necessary to rmly
secure the sleeve to the dashboard (page
26).
CAUTION
For proper operation of the disc player,
the chassis must be mounted within
30° of horizontal. Make sure the unit is
mounted within this limitation.
27
Section
04
English
En
4 Place the unit in front of the dashboard
opening so the wiring can be brought
through the mounting sleeve. Follow
the wiring diagram carefully and make
certain all connections are secure and
insulated with wire nuts or electrical tape.
After completing the wiring connections,
turn the unit on to confirm operation
(vehicle ignition must be on). If the unit
does not operate, re-check all wiring until
the problem is corrected.
5 Make sure the radio is right-side up, then
carefully slide the radio into the mounting
sleeve until it is fully seated and the
spring clips lock it into place.
Optimum performance is obtained when
the unit is installed at an angle of less
than 20°.
Installation
6 Secure the rear of the unit to the car
body using the mounting bolt and rubber
cushion.
7 Test the unit using the "Operation"
instructions that follow.
Kit installation
If your vehicle requires the use of an
installation kit to mount this unit, follow the
instructions included with the installation
kit to attach the unit to the mounting plate
supplied with the kit.
1 Wire and test the unit as outlined in the
Mounting Sleeve Installation instructions.
2 Install the radio/mounting plate assembly
to the sub-dashboard according to the
instructions in the installation kit.
3 Replace the dashboard trim panel.
Mounting bolt
rubber cushion
Screwdriver
Mounting sleeve
The rear of the unit
Note
Fix the trim plate at proper direction, the upper side is thicker than lower side.
Trim plate
Transport
screws
When not removing
transport screws,
the disc player
does not work
properly.
Please installation
after removing
transport screws.
28
04
Section
En
Installation
Remove the Unit
1 Remove the panel (Reference page 9).
2 Remove the trim ring by rmly grasping
one side and pulling.
3 Insert the extraction keys straight back
until they lock, then pull the radio out.
If the extraction keys are inserted at an
angle, they will not lock properly and will
not release the unit.
ISO installation
This unit has threaded holes in the chassis
side panels which may be used with the
original factory mounting brackets of
some vehicles to mount the radio to the
dashboard. Please consult with your local
car stereo shop for assistance on this type
of installation.
1 Remove the existing factory radio
from the dashboard or center console
mounting. Save all hardware and
brackets as they will be used to mount
the new radio.
2 Carefully unsnap the plastic frame from
the front of the new unit chassis. Remove
and discard the frame.
3 Remove the factory mounting brackets
and hardware from the existing unit
and attach them to the new unit. Do not
exceed M5 x 6mm maximum screw size.
Longer screws may damage components
inside the chassis.
4 Wire the new unit as outlined in the
Mounting Sleeve Installation instructions.
5 Mount the new unit assembly to the
dashboard or center console using the
reverse procedure of step 1.
Fuse
When replacing a fuse, make sure the new
fuse is the correct type and amperage.
Using an incorrect fuse could damage the
radio.
Reconnect battery
When wiring is complete, reconnect the
battery negative terminal.
29
Appendix
English
En
05
Additional information
Troubleshooting
Common
Symptom Cause Action
The power will not turn
on. The unit will not
operate.
Leads and connectors are
incorrectly connected.
Conrm once more that all
connections are correct.
The fuse is blown.
Rectify the cause and then replace
the fuse. Be sure to install a fuse
with the same rating.
Noise and/or other factors
are causing the built-in
microprocessor to operate
incorrectly.
Press [RESET].
The power isn’t enabled
correctly.
Press [SRC] button to turn on the
unit.
Operation with the remote
control is not possible.
The unit does not operate
correctly even when
the appropriate remote
control buttons are
pressed.
Battery power is low. Load a new battery.
There is no sound.
The volume level will not
rise.
Cables are not
connected correctly.
Connect the cables
correctly.
There is no sound. Mute is On at the time of
the source of "AV/AUX." Press [MUTE].
Demo mode always
starts.
System setting returns to
initial state.
Wiring of "ACC+" and
"Battery" are reversed
each other.
Please conrm wiring of "Battery"
and "ACC+".
Refer to "Wiring diagram" (page
24)
The aspect ratio is
incorrect and the image is
stretched.
The aspect ratio setting is
incorrect for the display.
Select the appropriate setting for
your display.
There is no
image displayed.
The parking
brake cable is
not connected.
Connect the parking
brake cable, and apply the parking
brake.
The image displayed
stops (pauses) and the
unit cannot be operated.
The data could no longer
be read during playback.
Stop playback once, and start
playback again.
There is no sound.
The volume level is low. The volume level is low. Adjust the volume level.
The sound and video
skip.
The unit is not rmly
secured. Firmly secure the unit.
Sub-folders cannot be
played back.
Folder repeat play has
been selected. Select the repeat range again.
The repeat range
changes automatically.
Another folder was
selected during repeat
play.
Select the repeat range again.
Track search or fast
forward/reverse was
performed during le
repeat play.
Select the repeat range again.
Appendix
30 En
05 Additional information
Symptom Cause Action
The sound from the
Bluetooth audio source is
not played back.
There is a call in progress
on a Bluetooth connected
cellular phone.
The sound will be played back
when the call is terminated.
A Bluetooth connected
cellular phone is currently
being operated.
Do not operate the cellular phone
at this time.
A call was made with
a Bluetooth connected
cellular phone and
then immediately
terminated. As a result,
communication between
this unit and the cellular
phone was not terminated
properly.
Reconnect the Bluetooth
connection between this unit and
the cellular phone.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the error message.
Message Cause Action
Loading Disc or storage device is
being read.
Please wait, it may take several minutes
for some disc or storage device.
No Disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Disc not present in loading
compartment. Insert disc.
Error Disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Disc format is not compatible
with this unit. Change another disc.
Video
resolution not
supported
The video resolution exceeds
720X576. Change to a supported le.
Not supported Disc or storage device format
is not compatible with this unit.
Change to a supported Disc or storage
device.
Wrong region DVD is not compatible with
region code of unit.
Use discs with corresponding regional
code.
Error Illegal mechanism operation. Press [ ] button for 5 seconds to reset
loading mechanism.
AMP Error
Unit fails to operate or speaker
connection is incorrect;
protective circuit is activated.
Check the speaker connection. If the
message fails to disappear even after the
engine is switched off/on, contact your
dealer or an authorized Pioneer Service
Station for assistance.
Check USB The USB over rated current. Check the USB device or change the USB
device.
31
Appendix
English
En
05
Handling guidelines
Discs and player
— Use discs featuring any of the following
logos.
— Use 12-cm discs. Do not use 8-cm discs
or an adapter for 8-cm discs.
— Use only conventional, fully circular
discs. Do not use shaped discs.
— Do not insert anything other than a
DVD-R/RW or CD-R/RW into the disc
loading slot.
— Do not use cracked, chipped, warped, or
otherwise damaged discs as they may
damage the player.
— Unfinalized CD-R/RW discs cannot be
played back.
— Do not touch the recorded surface of the
discs.
— Store discs in their cases when not in
use.
— Do not attach labels, write on or apply
chemicals to the surface of the discs.
— To clean a disc, wipe the disc with a soft
cloth outward from the center.
— Condensation may temporarily impair the
player's performance.
Let it rest for about one hour to adjust to
a warmer temperature.
Also, wipe any damp discs off with a soft
cloth.
— Playback of discs may not be possible
because of disc characteristics, disc
firmat, recorded application, playback
environment, storage conditions, and so
on.
— Road shocks may interrupt disc playback.
— Certain functions may not be available
for some DVD video discs.
— It may not be possible to play back some
DVD video discs.
— It is not possible to play back DVD-RAM
discs.
— This unit is not compatible with discs
recorded in AVCHD (Advanced Video
Codec High Definition) format. Do not
insert AVCHD discs as you may not be
able to eject the disc.
— When using discs that can be printed on
label surfaces, check the instructions and
the warnings of the discs. Depending on
the discs, inserting and ejecting may not
be possible. Using such discs may result
in damage to this equipment.
— Do not attach commercially available
labels or other materials to the discs.
• The discs may warp making the disc
unplayable.
• The labels may come off during
playback and prevent ejection of the
discs, which may result in damage to
the equipment.
DVD-R/RW discs
Unfinalized DVD-R/RW discs which have
been recorded in the Video format (video
mode) cannot be played back.
Playback of DVD-R/RW discs may not
be possible, due to disc characteristics,
scratches or dirt on the disc, or dirt,
condensation, etc. on the lens of this unit.
Depending on the application settings
and the environment, playback of discs
recorded on a personal computer may
not be possible. (For details, contact the
manufacturer of the application.)
CD-R/RW discs
When CD-R/RW discs are used, playback
is possible only for discs which have been
nalized.
Playback of CD-R/RW discs recorded
on a music CD recorder or a personal
computer may not be possible due to disc
characteristics, scratches or dirt on the disc,
or dirt, condensation, etc., on the lens of
this unit.
Depending on the application settings
and the environment, playback of discs
recorded on a personal computer may
not be possible. (For details, contact the
manufacturer of the application.)
Playback of CD-R/RW discs may become
impossible in case of direct exposure to
sunlight, high temperatures, or the storage
conditions in the vehicle.
Titles and other text information recorded on
a CD-R/RW discs may not be displayed by
this unit (in the case of audio data (CDDA)).
Additional information
Appendix
32 En
05 Additional information
DualDisc
DualDiscs are two-sided discs that have a
recordable CD for audio on one side and a
recordable DVD for video on the other.
Playback of the DVD side is possible with
this unit.
However, since the CD side of DualDiscs is
not physically compatible with the general
CD standard, it may not be possible to play
the CD side with this unit.
Frequent loading and ejecting of a DualDisc
may result in scratches on the disc.
Serious scratches can lead to playback
problems on this unit. In some cases, a
DualDisc may become stuck in the disc
loading slot and will not eject.
To prevent this, we recommend you refrain
from using DualDisc with this unit.
Please refer to the information from the disc
manufacturer for more detailed information
about DualDiscs.
USB storage device
— Address any questions you have about
your external storage device (USB) to
the manufacturer of the device.
— Do not leave the external storage device
(USB) in places with high temperatures.
— Depending on the external storage
device (USB), the following problems
may occur.
- Operations may vary.
- The storage device may not be
recognized.
- Files may not be played back properly.
— Connections via USB hub are not
supported.
— Do not connect anything other than a
USB storage device.
— Firmly secure the USB storage device
when driving. Do not let the USB storage
device fall onto the floor, where it may
become jammed under the brake or
accelerator pedal.
— Firmly secure the USB storage device
when driving. Do not let the USB storage
device fall onto the floor, where it may
become jammed under the brake or
accelerator pedal.
— Depending on the USB storage device,
the device may cause noise to occur in
the radio.
- The device may generate noise in the
radio.
— This unit can play back les in the USB
portable audio player/USB memory that
is USB Mass Storage Class. However,
copyright protected les that are stored in
the USB devices cannot be played back.
— You cannot connect a USB portable
audio player/USB memory to this unit via
USB hub.
— Partitioned USB memory is not
compatible with this unit.
— Depending on the kind of USB portable
audio player/USB memory you use, the
device may not be recognized or audio
les may not be played back properly.
— Do not leave the USB portable audio
player/USB memory in direct sunlight for
extended amounts of time. Doing so may
cause the device to malfunction from the
extreme rise in temperature.
— Up to 1 000 folders and 1 500 les can
be recognized.
— There may be a slight delay at the start
of playback of audio les embedded with
image data or audio files stored on a
USB storage device that has numerous
folder hierarchies.
JPEG picture les
— JPEG is short for Joint Photographic
Experts Group and refers to a still image
compression technology standard.
— There is no progressive JPEG
compatibility.
— EXIF format not support.
Important
— When naming a JPEG image le, add the
corresponding filename extension (.jpg,
.jpeg, .jpe or .jf).
— This unit plays back files with these
filename extensions (.jpg, .jpeg, .jpe
or .jfif) as a JPEG image file. To
prevent malfunctions, do not use these
extensions for files other than JPEG
image les.
CAUTION
Pioneer accepts no responsibility for data
lost on the USB memory/USB portable
audio player even if that data is lost while
using this unit.
Compressed audio compatibility
(Disc, USB)
WMA
File extension: .wma
Bit rate: 32 kbps to 320 kbps (CBR), VBR
33
Appendix
English
En
05
Additional information
Sampling frequency: 32 kHz to 48 kHz
Windows MediaTM Audio Professional: Not
compatible
Windows MediaTM Audio Lossless: Not
compatible
Windows MediaTM Audio Voice/DRM
Stream/Stream with video: Not compatible
MP3
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
Compatible ID3 tag version: 1.0, 2.3 (ID3
tag Version 2.3 is given priority over Version
1.0.)
M3u playlist: Not compatible
MP3i (MP3 interactive) : Not compatible
Mp3 PRO : Not compatible
AAC
Compatible format: AAC encoded by iTunes
File extension: .m4a
Sampling frequency: 11.025 kHz to 48 kHz
Bit rate: 16 kbps to 320 kbps
Apple Lossless: Not compatible
AAC le bought from the iTunes Store (.m4p
le extension): Not compatible
DivX compatibility
Compatible format: DivX video format
implemented in relation to DivX standards.
File extensions: .avi or .divx
DivX UItra format: Not compatible
DivX HD format: Not compatible
DivX les without video data: Not compatible
DivX plus: Not compatible
Compatible audio codec: MP2, MP3, Dolby
Digital
LPCM: Compatible
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
Compatible external subtitle le extension:
.srt, .txt
MPEG-1/MPEG-2/MPEG-4 video
File extensions:
.mpg or .mpeg (MPEG-1/MPEG-2), .avi
(MPEG-4)
Compatible audio codec:
MP2 (MPEG-1/MPEG-2), MP2, MP3, Dolby
Digital
LPCM: Not compatible
Bit rate: 16 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
Version Bitrate
Input
Sample
rate
Output
Sample
rate
MPEG
V1/L1 32k--448k 32K,44.1K,
48K
32K,
44.1K,
48K
V1/L2 32k--
192k(single
channel),64K,
96K->384K
(2 channel)
32K,
44.1K,
48K
V2/L2 8k--192k(single
channel),32K,
48K->640K
(multi channel)
22.05K(LSF),
32K,44.1K,
48K
For MPEG4 playable video format, and
additional "resolution", "simple profile",
"30fps".
Resolution: 720*480 / 576 (30fps)
iPod compatibility
This unit supports only the following iPod
models.
- iPod touch (3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (4th, 5th, 6th and 7th generation)
- iPhone 6 Plus
- iPhone 6
- iPhone 5
- iPhone 4S
- iPhone 4
- iPhone 3GS
Depending on the generation or version
of the iPod, some functions may not be
available.
Operations may vary depending on the
software version of iPod.
iPod video les are not available.
When using an iPod, an 30-pin connector to
USB Cable is required.
A Pioneer CD-IU51 interface cable is also
available. For details, consult your dealer.
When using an iPod, an Lightning connector
to USB Cable is required.
A Pioneer CD-IU52 interface cable is also
available. For details, consult your dealer.
About the file/format compatibility, refer to
the iPod manuals.
Podcast: Compatible
CAUTION
Pioneer accepts no responsibility for data
lost on the iPod, even if that data is lost
while this unit is used.
Supplemental information
Some characters in a file name (including
the le extension) or a folder name may not
be displayed.
Appendix
34 En
05
Disc
Folder selection sequence or other
operation may differ depending on the
encoding or writing software.
External storage device (USB)
The playback sequence is the same as the
recorded sequence in the external storage
device (USB).
To specify the playback sequence, the
following method is recommended.
Create a le name that includes numbers
that specify the playback sequence (e.g.,
01xxx.mp3 and 099yyy.mp3).
Put those les into a folder.
Save the folder that contains the les to
the external storage device (USB).
However, depending on the system
environment, you may not be able to specify
the playback sequence.
For USB portable audio players, the
sequence is different and depends on the
player.
Using the display correctly
CAUTION
• If liquid or foreign matter should get
inside this unit, turn off the power
immediately and consult your dealer
or the nearest authorized PIONEER
Service Station. Do not use the unit in
this condition because doing so may
Example of a hierarchy
( )
0
1
2♪①
♪②
5
♪⑧
♪⑦
6
7
⑨
♪③
3
4
♪④
♪⑤
♪⑥
Layer1 Layer2 Layer3 Layer5Layer4
○Root Folde
Folder
♪File
♪
This unit may not work properly depending
on the application used to encode WMA
les.
There may be a slight delay at the start
of playback of audio files embedded with
image data or audio les stored on a USB
storage device that has numerous folder
hierarchies.
Disc
File system: ISO 9660 Level 1 and 2,
Romeo, Joliet, UDF 1.02(DVD-R/RW)
Regardless of the length of blank sections
between the songs from the original
recording, compressed audio discs play
with a short pause between songs.
External storage device (USB)
Playable folders: up to 300
Playable les: up to 2 000
Playable of copyright-protected files: Not
compatible
Partitioned external storage device (USB):
Only the rst
playable partition can be played.
There is no compatibility for Multi Media
Cards (MMC).
CAUTION
• Pioneer accepts no responsibility for data
lost on the USB memory/USB portable
audio player even if that data is lost while
using this unit.
• Pioneer cannot guarantee compatibility
with all USB mass storage devices and
assumes no responsibility for any loss of
data on media players, smart phones, or
other devices while using this product.
• Do not leave the discs/external storage
device (USB) or iPod in places with high
temperatures.
Additional information
35
Appendix
English
En
05
result in fire, electric shock, or other
failure.
• If you notice smoke, a strange noise
or smell, or any other abnormal signs
from the display, turn off the power
immediately and consult your dealer
or the nearest authorized PIONEER
Service Station. Using this unit in this
condition may result in permanent
damage to the system.
• Do not disassemble or modify this unit,
as there are high-voltage components
inside which may cause electric
shock. Be sure to consult your dealer
or the nearest authorized PIONEER
Service Station for internal inspection,
adjustments, or repairs.
Handling the display
• When the display is subjected to direct
sunlight for a long period of time, it will
become very hot resulting in possible
damage to the LCD screen. You should
avoid exposing the display unit to direct
sunlight as much as possible.
• The display should be used within the
temperature range of –20°C to +60°C.
At temperatures higher or lower than this
operating temperature range, the display
may not operate normally.
Liquid crystal display (LCD) screen
• Heat from the heater may damage the
LCD screen, and cool air from the cooler
may cause moisture to form inside the
display resulting in possible damage.
Also, if the display is cooled down by the
cooler, the screen may become dark,
or the life span of the small uorescent
tube used inside the display may be
shortened.
• Small black dots or white dots (bright
dots) may appear on the LCD screen.
These are due to the characteristics of
the LCD screen and do not indicate a
malfunction.
• When using a cellular phone, keep
the antenna away from the display to
prevent disruption of the video image by
the appearance of spots, colored stripes,
etc.
LED (light-emitting diode) backlight
• At low temperatures, using the LED
backlight may increase image lag and
Additional information
degrade the image quality due to the
characteristics of the LCD screen. Image
quality will improve with an increase in
temperature.
• To protect the LED backlight, the display
will darken in the following environments:
— In the direct sunlight
— Near the heater vent
• The product lifetime of the LED
backlight is more than 10 000 hours.
However, it may decrease if used in high
temperatures.
• If the LED backlight reaches the end
of its product lifetime, the screen will
become dark and the image will no
longer be projected. In such cases,
please consult your dealer or the nearest
authorized PIONEER Service Station.
Copyright and trademark
DVD video
is a trademark of DVD Format/Logo.
Rovi
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
MP3
Supply of this product only conveys a
license for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenuegenerating) real time
broadcasting (terrestrial, satellite, cable and/
or any other media), broadcasting/streaming
via internet, intranets and/or other networks
or in other electronic content distribution
systems, such as pay-audio or audio-on-
demand applications. An independent
license for such use is required. For details,
please visit
http://www.mp3licensing.com.
WMA
Windows Media is either a registered
trademark or trademark of Microsoft
Appendix
36 En
05 Additional information
Corporation in the United States and/or
other countries.
This product includes technology owned
by Microsoft Corporation and cannot be
used or distributed without a license from
Microsoft Licensing, Inc.
DivX®
DivX®, DivX Certied® and associated logos
are trademarks of DivX, LLC and are used
under license.
This DivX Certified® device has passed
rigorous testing to ensure it plays DivX®
video.
To play purchased DivX movies, first
register your device at vod.divx.com. Find
your registration code in the DivX VOD
section of your device setup menu.
Dolby Digital
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories.
iPod & iPhone
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod or iPhone, respectively, and has been
certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory
with iPod or iPhone may affect wireless
performance.
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Lightning
Lightning is a trademark of Apple Inc.
App Store
App Store is a service mark of Apple Inc.
iOS
iOS is a trademark on which Cisco holds
the trademark right in the US and certain
other countries.
iTunes
iTunes is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Bluetooth
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks
by PIONEER CORPORATION is under
license. Other trademarks and trade names
are those of their respective owners.
AndroidTM & Google Play
Android and Google Play are trademarks of
Google Inc.
AAC
AAC is short for Advanced Audio Coding
and refers to an audio compression
technology standard used with MPEG-2 and
MPEG-4. Several applications can be
used to encode AAC files, but file formats
and extensions differ depending on the
application which is used to encode. This
unit plays back AAC files encoded by
iTunes.
37
Appendix
English
En
05
Specications
General
Rated power source: ............................... 14.4 V cc (12.0 V to 14.4 V allowable)
Grounding system ......................................Negative type
Maximum current consumption: .............. 10.0 A
Dimensions (W × H × D):
Chassis ............................................ 178 mm × 50 mm × 165 mm
Nose ................................................ 188 mm × 58 mm × 22 mm
Weight: .................................................... 1.4 kg
Display
Screen size/aspect ratio: ......................... 3.5 inch wide/16:9 (effective display area: 76.80 mm
× 43.20 mm)
Pixels: ...................................................... 320 × (RGB) × 240
DVD Player
System..................................................... DVD video, Video CD, CD, WMA, MP3, DivX, JPEG,
AAC, MPEG4
Usable discs ............................................ DVD video, Video CD, CD, CD-R/RW, DVD±R/RW/
R DL
Region number ........................................ 4 for Latin America models
2 for Middle East Asian models
Frequency response ................................ 20 Hz to 20 kHz (with DVD, at sampling frequency
96 kHz)
Signal-to-noise ratio................................. 75 dB (1 kHz) (IEC-A network) (RCA level)
Output level:
Video ............................................... 1.0 Vp-p/75 Ω (±0.2 V)
Number of channels ................................ 2 (stereo)
MP3 decoding format .............................. MPEG-1 & 2 Audio Layer 3
WMA decoding format ............................. Ver. 7, 8, 9 (CBR,VBR) (Support 353 format)
AAC decoding format .............................. Support AAC LC (2ch)
MPEG video decoding format.................. MPEG-1/MPEG-2/MPEG-4 video
DivX decoding format .............................. Home Theater Ver. 3, 4, 5.2, 6 (.avi, .divx)
DVD video output .................................... NTSC
Audio
Maximum power output: .......................... 50 W × 4
Continuous power output ... .................... 22 W × 4 (50 Hz to 15 000 Hz, 5 %THD, 4 Ω load,
both channels driven)
Load impedance: ..................................... 4 Ω (4 Ω to 8 Ω allowable)
Preout maximum output level .................. 4.0 V
Equalizer (3-Band Graphic Equalizer):
Frequency ....................................... 100Hz/1kHz/10kHz
Gain ................................................. -14 to +14 dB
Additional information
Appendix
38 En
05 Additional information
Subwoofer (mono):
Frequency ....................................... 80 Hz/120 Hz/160 Hz
Gain ................................................. -79 dB to 0 dB
USB
USB standard specication: .................... USB 1.1, USB 2.0 full speed
Maximum current supply ......................... 1.0 A
File system: ............................................. FAT16, FAT32
FM tuner
Frequency range: .................................... 87.5 MHz to 108.0 MHz)
Usable sensitivity ..................................... 10 dBμ (S/N: 30 dB)
AM tuner
Frequency range: .................................... 531 kHz to 1 602 kHz (9 kHz)
.................................... 530 kHz to 1 640 kHz (10 kHz)
Usable sensitivity: .................................... 30 dBμ (S/N: 20 dB)
Bluetooth
Version .................................................... Bluetooth 2.1 certied
Output power ........................................... +4 dBm Maximum(Power class 2)
Note
Specications and the design are subject to modications without notice.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
台北市內湖區瑞光路407號8樓
電話: 886-(0)2-2657-3588
先鋒電子(香港)有限公司
香港九龍長沙灣道909號5樓
電話: 852-2848-6488
2015 PIONEER CORPORATION.
All rights reserved.
Visit us on the World Wide Web at
http://pioneer.jp/group/index-e.html
<Middle East & Africa>
Pioneer Gulf.FZE http://www.pioneer-mea.com
<Oceania>
Pioneer Electronics Australia. Pty. Ltd. http://www.pioneer.com.au/
<Asia>
Pioneer Electronics Asiacentre.Pte http://www.pioneer.com.sg
Pioneer (HK) Ltd. http://www.pioneerhongkong.com.hk
Pioneer High Fidelity Taiwan Co., Ltd. http://www.pioneer-twn.com.tw
<Latin>
Pioneer International Latin America S.A. http://www.pioneer-latin.com