Pioneer Dj Equipment Ddj Sz Users Manual

Pioneer-Ddj-Sz-Owners-Manual pioneer-ddj-sz-owners-manual

DDJ-SZ to the manual 14f8a2f6-bfc9-4b6f-b21e-9e6104d3e603

2015-01-26

: Pioneer Pioneer-Dj-Equipment-Ddj-Sz-Users-Manual-333944 pioneer-dj-equipment-ddj-sz-users-manual-333944 pioneer pdf

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

DJ Controller

DDJ-SZ

http://pioneerdj.com/support/

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.

http://serato.com/

For the latest version of the Serato DJ software, access Serato.com and download the software from there.

Operating Instructions (Basic Edition)

IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.

CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

D3-4-2-1-1b_A1_En

IMPORTANT
ATTENTION
DANGER D´ELECTROCUTION
NE PAS OUVRIR
Ce symbole de l’éclair, placé dans un
triangle équilatéral, a pour but d’attirer
l’attention de l’utilisateur sur la présence, à
l’intérieur du coffret de l’appareil, de
“tensions dangereuses” non isolées d’une
grandeur suffisante pour représenter un
risque d’électrocution pour les êtres
humains.

ATTENTION :
POUR ÉVITER TOUT RISQUE
D’ÉLECTROCUTION, NE PAS ENLEVER LE
COUVERCLE (NI LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE RÉPARABLE PAR
L’UTILISATEUR NE SE TROUVE À
L’INTÉRIEUR. CONFIER TOUT ENTRETIEN À
UN PERSONNEL QUALIFIÉ UNIQUEMENT.

Ce point d’exclamation, placé dans un
triangle équilatéral, a pour but d’attirer
l’attention de l’utilisateur sur la présence,
dans les documents qui accompagnent
l’appareil, d’explications importantes du
point de vue de l’exploitation ou de
l’entretien.
D3-4-2-1-1b_A1_Fr

1)
2)
3)
4)
5)
6)
7)

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

D3-7-13-69_En

WARNING

This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.

AVERTISSEMENT

Cet appareil n’est pas étanche. Pour éviter les risques
d’incendie et de décharge électrique, ne placez près de
lui un récipient rempli d’eau, tel qu’un vase ou un pot
de fleurs, et ne l’exposez pas à des gouttes d’eau, des
éclaboussures, de la pluie ou de l’humidité.

D3-4-2-1-3_A1_En

WARNING

This product equipped with a three-wire grounding
(earthed) plug - a plug that has a third (grounding) pin.
This plug only fits a grounding-type power outlet. If you
are unable to insert the plug into an outlet, contact a
licensed electrician to replace the outlet with a properly
grounded one. Do not defeat the safety purpose of the
grounding plug.
D3-4-2-1-6_A1_En

D3-4-2-1-3_A1_Fr

AVERTISSEMENT

Cet appareil est muni d’une fiche de mise à la terre
(masse) à trois fils. Comme la fiche présente une
troisième broche (de terre), elle ne peut se brancher
que sur une prise de courant, prévue pour une mise à
la terre. Si vous n’arrivez pas à insérer la fiche dans la
prise de courant, contactez un électricien qualifié pour
faire remplacer la prise par une qui soit mise à la terre.
N’annulez pas la fonction de sécurité que procure cette
fiche de mise à la terre.
D3-4-2-1-6_A1_Fr

WARNING

To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.

AVERTISSEMENT

Pour éviter les risques d’incendie, ne placez aucune
flamme nue (telle qu’une bougie allumée) sur l’appareil.
D3-4-2-1-7a_A1_Fr

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
D3-4-2-1-7c*_A2_En

Milieu de fonctionnement

Température et humidité du milieu de fonctionnement :
De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité
relative inférieure à 85 % (orifices de ventilation non
obstrués)
N’installez pas l’appareil dans un endroit mal ventilé ou
un lieu soumis à une forte humidité ou en plein soleil
(ou à une forte lumière artificielle).
D3-4-2-1-7c*_A1_Fr

VENTILATION CAUTION

When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 5 cm at top, 5 cm at rear, and 5 cm at each
side).
D3-4-2-1-7d*_A1_En

CAUTION
The
switch on this unit will not completely shut
off all power from the AC outlet. Since the power cord
serves as the main disconnect device for the unit,
you will need to unplug it from the AC outlet to shut
down all power. Therefore, make sure the unit has
been installed so that the power cord can be easily
unplugged from the AC outlet in case of an accident.
To avoid fire hazard, the power cord should also be
unplugged from the AC outlet when left unused for a
long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En

PRÉCAUTION DE VENTILATION

Lors de l’installation de l’appareil, veillez à laisser un
espace suffisant autour de ses parois de manière à
améliorer la dissipation de chaleur (au moins 5 cm sur
le dessus, 5 cm à l’arrière et 5 cm de chaque côté).
D3-4-2-1-7d*_A1_Fr

ATTENTION
L’interrupteur
de cet appareil ne coupe pas
complètement celui-ci de sa prise secteur. Comme le
cordon d’alimentation fait office de dispositif de
déconnexion du secteur, il devra être débranché au
niveau de la prise secteur pour que l’appareil soit
complètement hors tension. Par conséquent, veillez à
installer l’appareil de telle manière que son cordon
d’alimentation puisse être facilement débranché de
la prise secteur en cas d’accident. Pour éviter tout
risque d’incendie, le cordon d’alimentation sera
débranché au niveau de la prise secteur si vous
prévoyez une période prolongée de non utilisation
(par exemple avant un départ en vacances).
D3-4-2-2-2a*_A1_Fr

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Product Name: DJ Controller
Model Number: DDJ-SZ
Responsible Party Name: PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.
Phone: 1-800-421-1404
URL: http://www.pioneerelectronics.com
D8-10-4*_C1_En

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances such as radios
and televisions, use shielded cables and connectors
for connections.
D8-10-3a_A1_En
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product may expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P5_B1_En

IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 19 FOR
FUTURE REFERENCE.
D36-AP9-3*_A1_En

WARNING

Store small parts out of the reach of children and infants.
If accidentally swallowed, contact a doctor immediately.
D41-6-4_A1_En

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a
safe level – a level that lets the sound come through
clearly without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and harmful
to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
• Once you have established a comfortable sound
level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:

• Do not turn up the volume so high that you can’t
hear what’s around you.
• Use caution or temporarily discontinue use in
potentially hazardous situations.
• Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.
S001a_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En

Contents
How to read this manual
! Thank you for buying this Pioneer product.
Be sure to read this booklet and the “Operating Instructions” provided on the Pioneer DJ support site. Both include important information that should be fully understood before using this product.
After you have finished reading the instructions, put them away in a
safe place for future reference.
For instructions on obtaining the Serato DJ software’s manual, see
Acquiring the manual (p.6).
! In this manual, names of screens and menus displayed on the product and on the computer screen, as well as names of buttons and
terminals, etc., are indicated within brackets. (e.g.: [CUE] button,
[Files] panel, [MIC1] terminal)
! Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
! Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
This manual consists mainly of explanations of functions of this unit
as hardware. For detailed instructions on operating the Serato DJ
software, see the Serato DJ software manual.
! The Serato DJ software manual can be downloaded from “Serato.
com”. For details, see Downloading the Serato DJ software manual
(p. 6).
! The most recent version of the Operating Instructions can be
downloaded from the Pioneer DJ support site. For details, see
Downloading this unit’s operating instructions (p.6).

Before start
What’s in the box......................................................................................... 6
Acquiring the manual................................................................................. 6
Installing the software................................................................................. 6
Names of Parts............................................................................................ 9

Operation
Connections............................................................................................... 12
Starting the system.................................................................................... 13
Quitting the system................................................................................... 15

Additional information
Changing the settings............................................................................... 16
Troubleshooting......................................................................................... 16
About trademarks and registered trademarks....................................... 16
Cautions on copyrights............................................................................. 16
Specifications............................................................................................ 16

Before start

Downloading the Serato DJ software
manual
1 Insert the CD-ROM into the computer’s optical drive.

What’s in the box
!
!
!
!
1

CD-ROM (Installation Disc)
Power cord
USB cable1
Operating Instructions (Basic Edition)
Only one USB cable is included with this unit.
To connect two units, use a cable conforming to USB 2.0 standards.

Acquiring the manual
The operating instructions may be in a file in PDF format. Adobe®
Reader® must be installed to read files in PDF format. If you do not
have Adobe Reader, please install it from the download link on the
CD-ROM’s menu screen.

Downloading this unit’s operating
instructions
1 Insert the CD-ROM into the computer’s optical drive.

The CD-ROM menu is displayed.
If the CD-ROM’s menu does not appear when the CD-ROM is inserted,
perform the operations below.
! For Windows
Open the optical drive from [Computer (or My Computer)] in
the [Start] menu, then double-click the [CD_menu.exe] icon.
! For Mac OS X
In Finder, double-click the [CD_menu.app] icon directly.

2 When the CD-ROM’s menu is displayed, select [Serato
DJ: Download the Software Manual (PDF file)], then click
[Start].
3 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
! To close the CD-ROM menu, click [Exit].

4 Click [Software Info] under [DDJ-SZ] on the Pioneer DJ
support site.
5 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.

6 Log in to your “Serato.com” user account.

2 When the CD-ROM’s menu is displayed, select [DDJSZ: Download the Operating Instructions (PDF file)], then
click [Start].

Installing the software

3 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].

Before installing the software

The web browser is launched and the Pioneer DJ support site is
displayed.

4 On the Pioneer DJ support site, click “Manuals” under
“DDJ-SZ”.
5 Click on the required language on the download
page.
Downloading of the operating instructions begins.

Input the e-mail address and password you have registered to log in to
“Serato.com”.

7 From “More Downloads” on the right side of the
download page, click “Serato DJ x.x Manual”.
Downloading of the Serato DJ software manual starts.

For the latest version of the Serato DJ software, access Serato.com
and download the software from there. A software download link is
also provided on the included CD-ROM.
! For details, refer to Installation procedure (Windows) or Installation
procedure (Mac OS X).
! The user is responsible for preparing the computer, network
devices and other elements of the Internet usage environment
required for a connection to the Internet.

About the driver software
This driver software is an exclusive driver for outputting audio signals
from a computer.

Checking the latest information on the driver software
For detailed information on this unit’s designated driver software, see
the Pioneer DJ support site below.
http://pioneerdj.com/support/

Serato DJ is a DJ software application by Serato. DJ performances are
possible by connecting the computer on which this software is installed
to this unit.

Minimum operating environment
Supported operating systems CPU and required memory
32-bit
version

®
Intel processor, Core™ i3, i5 and i7
1.07 GHz or better, Intel® processor,
Core™ 2 Duo 2.0 GHz or better

64-bit
version

Intel® processor, Core™ i3, i5 and i7
1.07 GHz or better, Intel® processor,
Core™ 2 Duo 2.4 GHz or better

2 GB or more of RAM

Mac OS X: 10.9, 10.8,
10.7 and 10.6

4 GB or more of RAM
32-bit
version

Intel® processor, Core™ i3, i5 and i7
1.07 GHz or better, Intel® processor,
Core™ 2 Duo 2.0 GHz or better

64-bit
version

Intel® processor, Core™ i3, i5 and i7
1.07 GHz or better, Intel® processor,
Core™ 2 Duo 2.4 GHz or better

2 GB or more of RAM

Windows: Windows 7

4 GB or more of RAM

Others
Optical drive

Optical disc drive on which the CD-ROM can be read

USB port

A USB 2.0 port is required to connect the computer
with this unit.

Display resolution

Resolution of 1 280 x 720 or greater

Internet connection

An Internet connection is required for registering the
“Serato.com” user account and downloading the software.

For the latest information on the required operating environment and compatibility as well as to acquire the latest operating system, refer to “Software Info”
under “DDJ-SZ” on the Pioneer DJ support site below.
http://pioneerdj.com/support/
! Operating System support assumes you are using the latest point release for
that version.
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook computers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.

Installation procedure (Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer’s administrator
before installing.
! If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the optical drive from [Computer (or My Computer)] in the
[Start] menu, then double-click the [CD_menu.exe] icon.

6 From the download page, download the driver
software for Windows (DDJ-SZ_X.XXX.exe).
7 Double-click the downloaded file.
The driver installation screen appears.

8 Carefully read the Software end user license
agreement and if you consent to the provisions, put a
check mark in [I agree.] and click [OK].

Before start

About the Serato DJ software

If you do not consent to the provisions of the Software end user license
agreement, click [Cancel] and stop installation.

9 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ software.

10 Select [Download Serato DJ Software.] from the
CD-ROM’s menu, then click [Start].
11 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.

12 Click [Software Info] under [DDJ-SZ] on the Pioneer DJ
support site.
13 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.

14 Log in to your “Serato.com” user account.

! If you have already registered a user account on “Serato.com”,
proceed to step 16.
! If you have not completed registering your user account, do so
following the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the
region in which you live.
— If you check [E-mail me Serato newsletters], newsletters
providing the latest information on Serato products will be
sent from Serato.
— Once user account registration is completed, you will receive
an e-mail at the e-mail address you have input. Check the
contents of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password specified when you performed user registration. They will be required
for updating the software.
! The personal information input when registering a new user
account may be collected, processed and used based on the
privacy policy on the Serato website.

15 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ download page. Proceed to step 17.

16 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.

2 From the menu that appears, select [Install Driver
Software], then click [Start].

17 Download the Serato DJ software from the download
page.

3 “Download the latest version? An internet
environment is required to access the site.” is displayed.
Click [Yes].

Unzip the downloaded file, then double-click the unzipped file to launch
the installer.

The web browser is launched and the Pioneer DJ support site is displayed.

4 Click [Software Download] under [DDJ-SZ] on the
Pioneer DJ support site.
5 Click [Driver Software].
En

18 Read the terms of the license agreement carefully,
and if you agree, select [I agree to the license terms and
conditions], then click [Install].

8 Double-click [DDJ-SZ_AudioDriver.pkg].
The driver installation screen appears.

9 Check the details on the screen and click [Continue].
10 When the end user license agreement appears, read
Software end user license agreement carefully, then click
[Continue].
11 If you consent to the provisions of the Software end
user license agreement, click [Agree].
If you do not consent to the provisions of the Software end user license
agreement, click [Disagree] and stop installation.

! If you do not agree to the contents of the license agreement, click
[Close] to cancel installation.
Installation begins.

12 Proceed with installation according to the instructions
on the screen.
13 Select [Download Serato DJ Software.] from the
CD-ROM’s menu, then click [Start].
14 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.

The message of successful installation appears once installation is
completed.

19 Click [Close] to quit the Serato DJ installer.

Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
! If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s optical drive.

16 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.

17 Log in to your “Serato.com” user account.

! If you have already registered a user account on “Serato.com”,
proceed to step 19.
! If you have not completed registering your user account, do so
following the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the
region in which you live.
— If you check [E-mail me Serato newsletters], newsletters
providing the latest information on Serato products will be
sent from Serato.
— Once user account registration is completed, you will receive
an e-mail at the e-mail address you have input. Check the
contents of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password specified when you performed user registration. They will be required
for updating the software.
! The personal information input when registering a new user
account may be collected, processed and used based on the
privacy policy on the Serato website.

The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear on the screen when the
CD-ROM is inserted, open the optical driver from Finder, then double-click the [CD_menu.app] icon.

18 Click the link in the e-mail message sent from “Serato.
com”.

2 From the menu that appears, select [Install Driver
Software], then click [Start].

19 Log in.

3 “Download the latest version? An internet
environment is required to access the site.” is displayed.
Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.

4 Click [Software Download] under [DDJ-SZ] on the
Pioneer DJ support site.
5 Click [Driver Software].
6 From the download page, download the driver
software for Mac OS (DDJ-SZ_M_X.X.X.dmg).
7 Double-click the downloaded file.
The [DDJ-SZ_AudioDriver] menu screen appears.

15 Click [Software Info] under [DDJ-SZ] on the Pioneer DJ
support site.

This takes you to the Serato DJ download page. Proceed to step 20.
Input the e-mail address and password you have registered to log in to
“Serato.com”.

20 Download the Serato DJ software from the download
page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.

Browser section

Before start

21 Read the terms of the license agreement carefully,
and if you agree, click [Agree].

1 Rotary selector
! If you do not agree to the contents of the usage agreement, click
[Disagree] to cancel installation.

22 If the following screen appears, drag and drop the
[Serato DJ] icon on the [Applications] folder icon.

2 BACK (VIEW) button
3 LOAD PREPARE (AREA) button

Deck section
This section is used to control the four decks. The buttons and controls
for operating decks 1 and 3 are located on the left side of the controller,
those for operating decks 2 and 4 are located on the right side of the
controller.

u
t

Names of Parts
! For details on the functions of the various buttons and controls, see
Part names and functions in the Operating Instructions.

1 Jog dial display section
1 Browser section
2 Deck section
3 Mixer section
4 Effect section

2 Jog dial
3 NEEDLE SEARCH pad
4 JOG FEELING ADJUST control
5 STOP TIME control
6 KEY LOCK button
7 Takeover indicator
8 TEMPO slider
9 AUTO LOOP button
a LOOP 1/2X button
b LOOP 2X button
En

c LOOP IN button

6 MASTER CUE button

d LOOP OUT button

7 Master level indicator

e PARAMETERc button, PARAMETERd button

8 BOOTH MONITOR control

f HOT CUE mode button

9 MASTER OUT COLOR control

g ROLL mode button

a OSCILLATOR SELECT button

h SLICER mode button

b OSCILLATOR VOLUME control

i SAMPLER mode button

c OSCILLATOR PARAMETER control

j Performance pads

d OSC ASSIGN selector switch

k PLAY/PAUSE f button

e HEADPHONES LEVEL control

l CUE button

f HEADPHONES MIXING control

m SYNC button

g SOUND COLOR FX buttons

n SHIFT button

h SAMPLER, MIC COLOR control

o DECK 3 button

i SAMPLER VOL control

p DECK 1 button

j EQ (HI, LOW) controls

q GRID SLIDE button

k MIC2 control

r GRID ADJUST button

l MIC1 control

s SLIP button

m LINE, PHONO, USB selector switch

t CENSOR button

n CD, USB selector switch

u PANEL button

o FX 1 assign button
p FX 2 assign button

Mixer section

q Channel Level Indicator

1 3224
m
l

r TRIM control

3224

5
m
6

s ISO (HI, MID, LOW) controls
t COLOR control
u Headphones CUE button
v Channel fader

r
7

w Crossfader assign selector switch
x Crossfader

s
q

s
t
u

2 USB connection indicator
3 USB (A) button
4 USB (B) button
5 MASTER LEVEL control
En

c
w

1 OFF, ON, TALK OVER selector switch

f
e

y FEELING ADJUST adjustment hole

Before start

Effect section
This section is used to control the two effect units (FX1 and FX2).
Controls and buttons to operate the FX1 unit are located on the left side
of the controller, those to operate the FX2 unit are located on the right
side of the controller. The channels to which the effect is to be applied
are set using the effect assign buttons.

1 Effect parameter controls
2 FX BEATS control
3 Effect parameter buttons
4 TAP button

Front panel

1 PHONES jacks
2 CROSS FADER CURVE selector switch

5 Connect the power cord.

Operation

To power outlet
Power cord
(included)

Connections
1 Connect headphones to one of the [PHONES]
terminals.

6 Press the [u] switch on this unit’s rear panel to turn
this unit’s power on.

2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.

Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.

7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).

! When a microphone, DJ player or other external device is connected to input terminals, the power of that device also turns on.

Powered speaker, etc.
! To output the sound from the [BOOTH] terminals, connect speakers or other devices to the [BOOTH] terminals.
! For details on connecting the input/output terminals, see the
Operating Instructions.

3 Connect this unit to your computer via a USB cable.

USB cable
(included)

4 Turn on the computer’s power.

Starting the system
Operation

Launching Serato DJ
For Windows
From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ].

For Mac OS X
In Finder, open the [Application] folder, then click the [Serato DJ] icon.

Computer screen directly after the Serato DJ software is launched

1
2

1 The [BUY/ACTIVATE] icon may appear on the right side of the screen that is displayed when Serato DJ is launched the first time, but there is no
need to activate or purchase a license for those using DDJ-SZ.
2 Click [Online] to use the unit as is.

To operate the beat grid
With Serato DJ, [SYNC PREFERENCES] is set to [Simple Sync] by default, but this must be switched to [Smart Sync] in order to perform beat grid
operations.
SETUP—DJ Preference—SYNC PREFERENCES
For instructions on displaying the settings screen and details on the beat grid, see the Serato DJ manual.

Computer screen when a track is loaded in the Serato DJ software
Click [Library] at the upper left of the computer screen, then select [Vertical] or [Horizontal] from the pull-down menu to switch the Serato DJ screen.

A Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.

B Waveform display
The loaded track’s waveform is displayed here.

C Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see
the Serato DJ software manual.

Importing tracks
The following describes the typical procedure for importing tracks.
! There are various ways to import tracks with the Serato DJ software. For details, see the Serato DJ software manual.
! If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ Intro) and have already created track libraries, the track libraries you
have previously created can be used as such.
! If you are using Serato DJ Intro and have already created track libraries, you may have to reanalyze the tracks.

1 Click the [Files] key on the Serato DJ software screen to open the [Files] panel.
The contents of your computer or the peripheral connected to the computer are displayed in the [Files] panel.

2 Click the folder on the [Files] panel containing the tracks you want to add to the library to select it.
3 On the Serato DJ software screen, drag and drop the selected folder to the crates panel.
A crate is created and the tracks are added to the library.

b
a [Files] panel
b Crates panel

Loading tracks and playing them
The following describes the procedure for loading tracks into deck [1] as
an example.

1 Press this unit’s [BACK (VIEW)] button, move the
cursor to the crates panel on the computer’s screen, then
turn the rotary selector to select the crate, etc.
2 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.

1 Rotary selector
2 BACK (VIEW) button

b
a Library
b Crates panel

3 Press the [DECK1] button.
4 Press the rotary selector to load the selected track
onto the deck.

Playing tracks and outputting the sound

Names of controls, etc.

Position

MASTER LEVEL control

Turned fully counterclockwise

CD, USB selector switch

[USB] position

TRIM control

Turned fully counterclockwise

ISO (HI, MID, LOW) controls

Center

Channel fader

Moved forward

Crossfader assign selector switch

[THRU] position

Operation

The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level. Note that loud sound will be output
if the volume is set too high.

1 Set the positions of the controls, etc., as shown below.

2 Press the [f] button to play the track.

d
4
5
e

6
7
8
9

3 Turn the [TRIM] control.

a
b

4 Move the channel fader away from you.

Adjust the [TRIM] control so that the channel level indicator’s orange
indicator lights at peak level.

5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.

Monitoring sound with headphones
f
3 CD, USB selector switch

Set the positions of the controls, etc., as shown below.
Names of controls, etc.

Position

HEADPHONES MIXING control

Center

HEADPHONES LEVEL control

Turned fully counterclockwise

4 TRIM control
5 ISO (HI, MID, LOW) controls
6 Headphones CUE button
7 Channel fader
8 HEADPHONES MIXING control
9 HEADPHONES LEVEL control
a Crossfader assign selector switch
b Crossfader

1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.

Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the Serato DJ software manual.
! The Serato DJ software manual can be downloaded from “Serato.com”.
For details, see Downloading the Serato DJ software manual (p. 6).

c MASTER LEVEL control
d MASTER CUE button

Quitting the system

e BOOTH MONITOR control

1 Quit [Serato DJ].

f CROSS FADER CURVE selector switch

When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.

2 Press the [u] switch on this unit’s rear panel to set
this unit’s power to standby.
3 Disconnect the USB cable from your computer.
En

Audio Section

Additional information
Changing the settings
! For detailed instructions on changing this unit’s settings, see
Changing the settings in the Operating Instructions.

Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If
you think that there is something wrong with this component, check
the items in the “Troubleshooting” section of this unit’s operating
instructions and the [FAQ] for the [DDJ-SZ] on the Pioneer DJ support site.
Sometimes the problem may lie in another component. Inspect the
other components and electrical appliances being used. If the problem cannot be rectified, ask your nearest Pioneer authorized service
center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other
external influences. In this case, proper operation may be restored by
turning the power off, waiting 1 minute, then turning the power back
on.

About trademarks and registered
trademarks
! Pioneer is a registered trademark of PIONEER CORPORATION.
The names of companies and products mentioned herein are the trademarks of their respective owners.

Cautions on copyrights
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.

Specifications
Power requirements..................................... AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption................................................................................ 30 W
Power consumption (standby).............................................................. 0.4 W
Main unit weight....................................................................10.4 kg (22.9 lb)
Max. dimensions.................... 870 mm (W) × 98.4 mm (H) × 419.5 mm (D)
(34.3 in. (W) × 3.9 in. (H) × 16.5 in. (D))
Tolerable operating temperature.......... +5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity....................... 5 % to 85 % (no condensation)

Sampling rate.....................................................................................44.1 kHz
A/D, D/A converter................................................................................24 bits
Frequency characteristic
USB, CD/LINE, MIC1, MIC2............................................. 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB................................................................................................. 111 dB
CD/LINE............................................................................................ 97 dB
PHONO............................................................................................. 90 dB
MIC1................................................................................................. 84 dB
MIC2................................................................................................. 84 dB
Total harmonic distortion (20 Hz — 20 kHzBW)
USB................................................................................................0.002 %
CD/LINE.........................................................................................0.004 %
Standard input level / Input impedance
CD/LINE............................................................................. –12 dBu/47 kW
PHONO.............................................................................. –52 dBu/47 kW
MIC1................................................................................. –52 dBu/8.5 kW
MIC2................................................................................. –52 dBu/8.5 kW
Standard output level / Load impedance / Output impedance
MASTER OUT 1..........................................+6 dBu/10 kW/390 W or less
MASTER OUT 2..........................................+2 dBu/10 kW/820 W or less
BOOTH........................................................+6 dBu/10 kW/390 W or less
PHONES..........................................................+8 dBu/32 W/10 W or less
Rated output level / Load impedance
MASTER OUT 1.................................................................. 24 dBu/10 kW
MASTER OUT 2.................................................................. 20 dBu/10 kW
Crosstalk
CD/LINE............................................................................................ 82 dB
Channel equalizer characteristic
HI.......................................................................–∞ dB to +6 dB (13 kHz)
MID..................................................................... –∞ dB to +6 dB (1 kHz)
LOW.................................................................... –∞ dB to +6 dB (70 Hz)
Microphone equalizer characteristic
HI....................................................................–12 dB to +12 dB (10 kHz)
LOW...............................................................–12 dB to +12 dB (100 Hz)

Input / Output terminals
CD/LINE Input terminals
RCA pin jacks................................................................................... 4 sets
PHONO/LINE input terminals
RCA pin jacks................................................................................... 2 sets
MIC1 terminal
XLR connector/phone jack (Ø 6.3 mm)............................................ 1 set
MIC2 terminal
Phone jack (Ø 6.3 mm)...................................................................... 1 set
MASTER OUT 1 output terminal
XLR connector................................................................................... 1 set
MASTER OUT 2 output terminal
RCA pin jacks..................................................................................... 1 set
BOOTH output terminal
Phone jack (Ø 6.3 mm)...................................................................... 1 set
PHONES output terminal
Stereo phone jack (Ø 6.3 mm).......................................................... 1 set
Stereo mini phone jack (Ø 3.5 mm).................................................. 1 set
USB terminals
B type................................................................................................ 2 sets
— Be sure to use the [MASTER OUT 1] terminals only for a balanced output. Connection with an unbalanced input (such
as RCA) using an XLR to RCA converter cable (or converter
adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the
[MASTER OUT 2] terminals.
— The specifications and design of this product are subject to
change without notice.

Additional information

PIONEER ELECTRONICS (USA) INC.

WARRANTY
Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by PUSA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing
defect when installed and operated according to the owner ’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA,
without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA.
THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE
PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES
RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE
AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION
PREPAID, ONLY FROM WITHIN THE U.S.A. AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT.
PUSA WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TOYOU WITHIN THE U.S.A.

PRODUCT WARRANTY PERIOD
DJ Audio and Video

...................................................................................................................................................................................

Parts

Labor

1 Year

Additional information

LIMITED WARRANTY

WARRANTY VALID ONLY IN THE U.S.A. AND CANADA

The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.

WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS".
PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.
THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVERTHE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGETO RECORDS OR RECORDINGTAPES OR DISCS, ANY
DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO
LIGHTNING ORTO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, ORTHE USE OF BATTERIES NOT CONFORMINGTOTHOSE
SPECIFIED INTHE OWNER’S MANUAL.
THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM
ANY SOURCE OTHERTHAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THISWARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED
BYTHE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE.
ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY

NO OTHER WARRANTIES

PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

TO OBTAIN SERVICE

PUSA has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you
need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it
carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to
prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business
hours.
On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-800-872-4159.

For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or write:
CUSTOMER SUPPORT
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1720
LONG BEACH, CALIFORNIA 90801
1-800-872-4159
http://www.pioneerelectronics.com

DISPUTE RESOLUTION

Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint Resolution Program
to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise
any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-800-872-4159 and explain to the customer service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint
has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:
(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing
informing you why it will not take any action.

RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________
Purchased From _____________________________________________________________________________________________________________________________
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
UCP0212

To register your product, find the nearest authorized service location, to
purchase replacement parts, operating instructions, or accessories,
please go to one of following URLs :
Pour enregistrer votre produit, trouver le service après-vente agréé le plus
proche et pour acheter des pièces de rechange, des modes d’emploi ou
des accessoires, reportez-vous aux URL suivantes :

In the USA & Canada/Aux Etats-Unis & Canada
http://www.pioneerelectronics.com
S018_B1_EnFr_PSV

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1720, Long Beach, California 90801-1720, U.S.A. TEL: (800) 421-1404
K002_PSV_CU

Printed in

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
Create Date                     : 2013:12:02 16:46:59+09:00
Modify Date                     : 2014:02:12 19:11:03+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:02:12 19:11:03+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:87d7a448-6683-4a89-b002-26f59683c4fa
Original Document ID            : xmp.did:BD7C5823AFD2DF1185BFE72C625F81A3
Document ID                     : xmp.id:072FBDEC255BE3118E968035DF90E43A
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:21D10BE7255BE3118E968035DF90E43A
Derived From Document ID        : xmp.did:CFC8A68C235BE311ACF0F20814709B56
Derived From Original Document ID: xmp.did:BD7C5823AFD2DF1185BFE72C625F81A3
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:12:02 16:46:59+09:00
Format                          : application/pdf
Creator                         : 
Title                           : 
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : SinglePage
Page Mode                       : UseThumbs
Page Count                      : 20

EXIF Metadata provided by EXIF.tools

Pioneer Dj Equipment Ddj Sz Users Manual

Pioneer-Ddj-Sz-Owners-Manual pioneer-ddj-sz-owners-manual

DDJ-SZ to the manual 14f8a2f6-bfc9-4b6f-b21e-9e6104d3e603

Navigation menu

Versions of this User Manual:

Views

Navigation