Pismolabs Technology P1371 Pepwave / Peplink / Pismo Wireless Product User Manual

Pismo Labs Technology Limited Pepwave / Peplink / Pismo Wireless Product

User Manual

Download: Pismolabs Technology P1371 Pepwave / Peplink / Pismo Wireless Product User Manual
Mirror Download [FCC.gov]Pismolabs Technology P1371 Pepwave / Peplink / Pismo Wireless Product User Manual
Document ID1907674
Application ID52mzz3oJt0pB7Vz+UjWumQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize240.22kB (3002731 bits)
Date Submitted2013-02-26 00:00:00
Date Available2013-02-26 00:00:00
Creation Date2013-02-26 17:24:15
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2013-02-26 17:58:59
Document TitleUser Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Craig Zimmerman

Pepwave AP One Series:
AP One/ AP One 300M / AP One mini / AP One X
Pepwave AP Pro Series:
AP Pro X
Pepwave Flex AP Series
Document Rev.3.0.10
Feb 26, 13
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2/26/13 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
User Manual
Table of Contents
1 Introduction and Scope .........................................................................................................4
2 Product Features and Benefits .............................................................................................5
3 Package Contents ..................................................................................................................6
3.1 AP One .............................................................................................................................6
3.2 AP One 300M....................................................................................................................6
3.3 AP One mini .....................................................................................................................6
3.4 AP One X ..........................................................................................................................6
3.5 AP Pro X ...........................................................................................................................7
3.6 Flex AP .............................................................................................................................7
4 Hardware Overview ................................................................................................................8
4.1 AP One .............................................................................................................................8
4.2 AP One 300M....................................................................................................................9
4.3 AP One mini ...................................................................................................................10
4.4 AP One X ........................................................................................................................11
4.5 AP Pro X .........................................................................................................................12
4.6 Flex AP ...........................................................................................................................13
5 Installation ............................................................................................................................14
5.1 Installation Procedures .................................................................................................15
6 Information ...........................................................................................................................16
6.1 System............................................................................................................................17
6.2 Wireless..........................................................................................................................18
7 Configuration .......................................................................................................................24
7.1 System............................................................................................................................25
7.2 LAN .................................................................................................................................29
7.3 Wireless Networks .........................................................................................................32
7.4 Advanced Wireless Settings .........................................................................................48
7.5 WDS ................................................................................................................................52
7.6 SpeedFusion™ ..............................................................................................................53
7.7 SNMP ..............................................................................................................................57
7.8 Web Administration .......................................................................................................60
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
8 Tools - Diagnostic Tools......................................................................................................62
9 Commands ...........................................................................................................................63
9.1 Activate Changes ..........................................................................................................64
9.2 Firmware ........................................................................................................................65
9.3 Configuration .................................................................................................................66
9.4 Misc ................................................................................................................................67
10 Real Time Status ................................................................................................................68
11 Peplink Balance AP Controller ..........................................................................................69
12 Restoring Factory Defaults................................................................................................70
12.1 AP One .........................................................................................................................70
12.2 AP One 300M................................................................................................................70
12.3AP One Mini .................................................................................................................71
12.4 AP One X ......................................................................................................................71
12.5 AP Pro X .......................................................................................................................71
12.6 Flex AP .........................................................................................................................71
13 Appendix.............................................................................................................................72
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
1 Introduction and Scope
Pepwave’s AP Series of enterprise-grade 802.11b/g/n Wi-Fi access points is engineered to
provide fast, dependable, and flexible operation in a variety of environments, all controlled by an
easy-to-use centralized management system. From the small but powerful AP One mini to the
top-of-the-line AP Pro X, the Pepwave AP Series offers wireless networking solutions to suit any
business need, and every Pepwave access point is loaded with essential features such as
multiple SSIDs, VLAN, WDS, and Guest Protect.
A single Pepwave access point can masquerade as up to four virtual access points, each with
its own security policy (WPA, WPA2, etc.) and authentication mechanism (802.1x, open, captive
portal, etc.), allowing faster, easier, and more cost-effective network builds. Each member of the
Pepwave AP Series family also features a high-powered Wi-Fi transmitter that greatly enhances
coverage and performance while reducing equipment costs and maintenance.
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
2 Product Features and Benefits
Key features and benefits of the Pepwave AP series:

High-powered Wi-Fi transmitter enhances coverage and lowers cost of ownership.

Independent security policies and encryption mechanisms for each virtual access point
allow fast, flexible, cost-effective network builds.

Centralized management via InControl reduces maintenance expense and time.

WDS support allows secure and fast network expansion.

Guest Protect support guards sensitive business data and sub-networks.
WMM (Wi-Fi Multimedia) and QoS (Quality of Service) support keeps video and other
bandwidth-intensive data flowing fast and lag-free.
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
3 Package Contents
3.1 AP One
Each Pepwave AP One package contains:
1 x Pepwave AP One
1 x omni-directional antenna
1 x power supply
1 x instruction sheet
3.2 AP One 300M
Each Pepwave AP One 300M package contains:
1 x Pepwave AP One 300M
2 x omni-directional antennas
1 x power supply
1 x instruction sheet
3.3 AP One mini
Each Pepwave AP One mini package contains:
1 x Pepwave AP One mini
1 x omni-directional antenna
1 x power supply
1 x instruction sheet
3.4 AP One X
Each Pepwave AP One X package contains:
1 x Pepwave AP One X
1 x omni-directional antenna
1 x instruction sheet
1 x installation guide
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
3.5 AP Pro X
Each Pepwave AP Pro X package contains:
1 x Pepwave AP Pro X
1 x instruction sheet
1 x installation guide
3.6 Flex AP
Each Pepwave Flex AP package contains:
1 x Pepwave Flex AP
1 x instruction sheet
1 x installation guide
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
4 Hardware Overview
4.1 AP One
Front View
Rear Panel View
Connectors
Antenna
RP-SMA connector for attaching the antenna.
(Left Connector)
WAN
Reset
10/100BaseT Ethernet connector, normally connected to a back haul
network.
Inset reset button. Depress with a pin and hold for at least five seconds to
restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
Power Connector DC 12V power input for use with the supplied power adapter.
LED Indicators
Power
Status
OFF– Power is off.
ON – Power is on.
OFF – Unit is initializing.
ON – Unit is ready.
Ethernet
OFF – Ethernet port is not connected.
ON – Ethernet port is connected.
Wireless
OFF – Wireless is not ready.
On – Wireless is ready.
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
4.2 AP One 300M
Front View
Rear Panel View
Connectors
USB
WAN
Reserved for future functionality.
10/100BaseT Ethernet connector, normally connected to a back haul
network.
10/100BaseT Power over Ethernet 802.3af connector, normally connected
to a back haul network.
WAN
Inset reset button. Depress with a pin and hold for at least five seconds to
restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
Power Connector DC 12V power input for use with the supplied power adapter.
Reset
LED Indicators
Power
OFF – Power is off.
ON – Power is on.
Status
OFF – Unit is initializing.
ON – Unit is ready.
Wireless
OFF – Wireless is not ready.
On – Wireless is ready.
http://www.pepwave.com
Copyright © 2/26/13 Pepwave
User Manual
4.3 AP One mini
Front View
Rear Panel View
Connectors
USB
Reserved for future functionality.
Power Connector DC 12V power input for use with the supplied power adapter.
10/100BaseT Ethernet connector, normally connected to a back haul
WAN
network.
Antenna
RP-SMA connector for attaching the antenna.
(Right Connector)
LED Indicators
PWR
OFF – Power is off.
ON – Power is on.
RDY
RED – Device is not booted.
AMBER – Device is not booted.
ENET
OFF – Ethernet port is not connected.
ON – Ethernet port is connected.
OFF – No client is associated.
ON – Clients are associated.
Each bar indicates an increase of up to 10 connected clients. The shortest
bar indicates from one to 10 clients while the longest indicates 31 or more
clients.
http://www.pepwave.com
10
Copyright © 2/26/13 Pepwave
User Manual
4.4 AP One X
Front View
Rear Panel View
Connectors
WAN
Reset
10/100BaseT Power over Ethernet 802.3af connector, normally connected
to a back haul network.
Inset reset button. Depress with a pin and hold for at least five seconds to
restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
Antenna
Female N-type connector for attaching the antenna.
(Right Connector)
LED Indicators
PWR
LAN
OFF – Power is off.
ON – Power is on.
OFF – Ethernet port is not connected.
ON – Ethernet port is connected.
Wi-Fi
OFF – Wi-Fi is not ready.
ON – Wi-Fi is ready.
OFF – No client is associated.
ON – Clients are associated.
Each light indicates an increase of up to 10 connected clients. The first light
(MIN) indicates from one to 10 clients, while the last (MAX) indicates 41 or
more clients.
http://www.pepwave.com
11
Copyright © 2/26/13 Pepwave
User Manual
4.5 AP Pro X
Front View
Rear Panel View
Top View
Connectors
Antenna
Female N-type connectors for attaching antennas.
Ground
Ground connection.
Console
RJ-45 Console connector for Pepwave Console Adapter with remote factory
reset functionality.
WAN
Power Connector
10/100BaseT Power over Ethernet 802.3af connector, normally connected
to a back haul network.
A connector for DC 10V-30V power input, to be used with the supplied
waterproof power connector.
LED Indicators
OFF – Power is off.
Status
RED – Unit is initializing.
GREEN – Unit is ready.
http://www.pepwave.com
12
Copyright © 2/26/13 Pepwave
User Manual
4.6 Flex AP
Front View
Rear LED Indicators
Connectors Panel inside the lid
Connectors
LAN1*PoE
LAN2 / 3
Reset
10/100BaseT Power over Ethernet Passive PoE connector
Ethernet LAN Port
Inset reset button. Depress with a pin and hold for at least five seconds
to restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
LED Indicators
OFF – Unit is initializing.
ON – Unit is ready.
OFF – Ethernet port is not connected.
LAN
ON – Ethernet port is connected.
Indicate the signal strength.
http://www.pepwave.com
13
Copyright © 2/26/13 Pepwave
User Manual
5 Installation
Your Pepwave access point acts as a bridge between wireless and wired Ethernet interfaces. A
typical setup follows:
http://www.pepwave.com
14
Copyright © 2/26/13 Pepwave
User Manual
5.1 Installation Procedures
1. Attach the antenna to your Pepwave access point.
2. Connect the Ethernet port on the unit with the backbone network using an Ethernet
cable. The port should auto sense whether the cable is straight-through or crossover.
3. Connect the power adapter to the power connector of the unit. Plug the power adapter
into a power source.
4. Wait for the status LED to turn green.
5. Connect a PC to the backbone network. Configure the IP address of the PC to be any IP
address between 192.168.0.4 and 192.168.0.254, with a subnet mask of 255.255.255.0.
6. Using Microsoft Internet Explorer 6 or above, Mozilla Firefox 2.0 or above, or Google
Chrome 2.0 or above, connect to https://192.168.0.3.
7. Enter the default admin login ID and password, admin and public respectively.
After logging in, the following Information main page appears. Click System, located under
Configure on the left, to begin setting up your access point.
http://www.pepwave.com
15
Copyright © 2/26/13 Pepwave
User Manual
6 Information
The Information section contains a number of tabs to keep you up-to-date on your access
point’s status and operation.
http://www.pepwave.com
16
Copyright © 2/26/13 Pepwave
User Manual
6.1 System
Click System, located under Information on the left, to display tabs for basic and advanced AP
configuration options.
System Information
Model
Firmware Version
Model name of your access point.
Firmware version number running on your access point.
AP Name
Name of your access point as defined in the configuration.
Location
Location of your access point as defined in the configuration.
Serial Number
Serial number of your access point.
MAC Address
MAC address of your access point.
Network IP
Information
Current gateway IP address of your access point.
System Time
Current system time with respect to the configured time.
Up Time
Up time of your access point since the most recent boot.
Click the Detail link next to Network IP Information to check IP Address Mode, IP Address,
Subnet Mask, Default Gateway, and DNS Server.
Click Close to dismiss the IP Info dialog.
http://www.pepwave.com
17
Copyright © 2/26/13 Pepwave
User Manual
6.2 Wireless
Click Wireless, located under Information on the left, to display tabs containing information
about your Pepwave access point, connected clients, WDS, and nearby networks.
http://www.pepwave.com
18
Copyright © 2/26/13 Pepwave
User Manual
6.2.1 AP Info
http://www.pepwave.com
19
Copyright © 2/26/13 Pepwave
User Manual
Wireless Information – AP Info
Wireless Network
SSID
Radio
Security Policy
Channel
Default VLAN ID
MAC Address
(BSSID)
SSID of your access point.
Frequency used by your access point’s radio.
Wireless authentication and encryption methods used by your access
point.
802.11 channel used by your access point.
VLAN ID tagged onto all outgoing packets generated using the current
wireless network profile.
Detailed BSSIDs for the current wireless network profile.
Usage Data Type
Data display used in the Wired Network Usage graph. Check Hourly to
display usage in 60-minute increments.
Wireless Network
Usage
Wireless network usage displayed using the options selected from the
Usage Data Type drop-down menu and the Hourly checkbox.
Number of Wireless Number of wireless clients displayed using the options selected from the
Usage Data Type drop-down menu and the Hourly checkbox.
Clients
Click Info to see Web Portal Login, Wireless Network Firewall, MAC Filter, Bandwidth
Control, and Layer 2 Isolation.
Click Close to dismiss the Info dialog.
Click Stat to check Packets Sent, Bytes Sent, Packets Received, and Bytes Received.
Click Close to dismiss the Stat dialog.
http://www.pepwave.com
20
Copyright © 2/26/13 Pepwave
User Manual
6.2.2 Connected Clients
Wireless Information – Connected Clients
Refresh Interval
Refresh
Total
Interval used when refreshing connected client data.
Click to manually refresh connected client data.
Number of connected clients since the last refresh.
MAC address
Client MAC address.
Manufacturer
AP manufacturer name, based on MAC prefix.
IP Address
Type
Signal
IP address of the connected client.
Radio mode of the connected client.
Duration
Signal strength of the connected client.
Time the listed client has been connected to the network, as reported at
the last refresh.
TX/RX Rate
Transmit and receive data rates for the connected client, as reported at
the last refresh.
TX/RX Bytes
(Packets)
Transmit and receive data volume for the connected client, as reported at
the last refresh. Packet data shown in parenthesis.
TX Errs
Number of transmit errors for the connected client, as reported at the last
refresh.
RX Errs
Number of receive errors for the connected client, as reported at the last
refresh.
http://www.pepwave.com
21
Copyright © 2/26/13 Pepwave
User Manual
6.2.3 WDS Info
Wireless Information – WDS Info
Local MAC
Address
MAC address identifying the local system.
Current Channel Current 802.11 broadcast channel used by the system.
Manufacturer
Access point manufacturer name, based on MAC prefix.
MAC Address
MAC address for connected peers.
Status
Encryption
Current WDS status: enabled or disabled.
Encryption method used by the WDS.
Click Edit to enable or disable WDS, edit the WDS MAC address, and select an encryption
method.
http://www.pepwave.com
22
Copyright © 2/26/13 Pepwave
User Manual
6.2.4 Nearby Networks
Wireless Information – Nearby Networks
Displays whether your access point is set to scan and discover nearby
Network Discovery access points.
How often your access point scans for nearby access points, providing
Scanning Interval Network Discovery is Enabled.
Scanning Time
Group by
Manufacturer
SSID
Security
MAC address
Channel
Signal (RSSI)
Last Seen
Status
Quantity dropdown menu
Refresh
Channel scan interval used by your access point when searching for
nearby access points.
Grouping method used for display of nearby access points.
Access point manufacturer name, based on MAC prefix.
SSID used to refer to the nearby access point.
Client authentication method(s) used by the nearby access point.
MAC address of the nearby access point.
Channel used by the nearby access point.
Radio signal strength of the nearby access point.
Time stamp indicating when the nearby access point was last seen, if at
all.
Current status of the nearby access point.
Number of nearby access points to display on one page.
Click this link to manually refresh nearby access point data.
http://www.pepwave.com
23
Copyright © 2/26/13 Pepwave
User Manual
7 Configuration
The Configure section allows you to set up all aspects of your Pepwave access point, from
basic system settings to advanced wireless options and more.
http://www.pepwave.com
24
Copyright © 2/26/13 Pepwave
User Manual
7.1 System
Click System, located under Configure on the left, to display tabs for basic and advanced AP
configuration options.
7.1.1 Basic
System Settings - Basic
AP Name
User-specified name assigned to your Pepwave access point. This name
can be retrieved via SNMP.
Location
User-specified name for the location of your access point. This name can
be retrieved via SNMP.
Timezone
Time region used by the system. All choices are based on UTC.
Keep Default IP
When enabled, this option maintains 192.168.0.3 as your access point’s
default IP address.
IP Address Mode
IP Address Mode options are Automatic and Manual. Automatic: The
IP address of your access point is acquired from a DHCP server on the
Ethernet segment. Manual: A user-specified IP address is used for your
access point. See next page for an example.
http://www.pepwave.com
25
Copyright © 2/26/13 Pepwave
User Manual
IP Address Mode – Manual
Unique IP address used by your Pepwave access point to communicate
Static IP Address on the Ethernet segment. This IP address is distinct from the admin IP
address (192.168.0.3) on the Ethernet segment.
Subnet Mask
Default Gateway
DNS Server
Subnet mask used by your access point.
Default gateway used by your access point.
DNS server address used by your Pepwave access point to resolve host
names.
IP Address Mode –Advanced
This specifies the username required in order to connect via PPPoE to
PPPoE Username acquire Internet connectivity. The information is typically determined by
and can be obtained from the ISP.
This specifies the password required in order to connect via PPPoE to
PPPoE Password acquire Internet connectivity. The information is typically determined by
and can be obtained from the ISP.
PPPoE Service
Name
This is a PPPoE parameter which is provided by the ISP. Note: Leave this
field empty if you are not sure.
http://www.pepwave.com
26
Copyright © 2/26/13 Pepwave
User Manual
7.1.2 Advanced
System Settings - Advanced
VLAN ID from which management sessions are allowed. Establishment of
management sessions is restricted to the specified VLAN ID. If
Management VLAN Management VLAN ID is set to 0, management sessions can be
ID
established without VLAN ID restrictions. Default value is 0, which means
that tagging is disabled, not that management sessions will be tagged
with 0.
Network Time Protocol (NTP) Server hostname used when synchronizing
NTP Server
your access point’s system clock. Default value is pool.ntp.org.
Automatic reboot schedule. Check Enable, then set the reboot schedule
Scheduled Reboot using the Schedule, Day, and Time drop-down menus.
Ethernet
Ethernet send and receive speed.
Speed/Duplex
Controller IP
IP address or domain name of an optional Peplink Balance AP Controller.
Address / Domain
Leave this field blank if not using a Balance AP Controller.
Name
Access point operation mode. Choose Bridge or Router. When Router is
AP Mode
selected, the following Manual Router Settings will be available:
http://www.pepwave.com
27
Copyright © 2/26/13 Pepwave
User Manual
7.1.2.1 Manual Router Settings
Manual Router Settings are available only when AP Mode in Advanced System Settings is
set to Router. When using Router mode, your Pepwave access point can be used as a DHCP
server for devices located behind it in the network.
Manual Router/DHCP Server Parameters
LAN IP
DHCP server IP address.
LAN Subnet Mask Subnet mask of the DHCP server.
DHCP Server
Check to enable the DHCP server feature of your Pepwave access point.
The following options will be enabled once you have checked and
enabled DHCP Server.
IP Start Range
First address in the range of IP addresses assigned to DHCP clients.
IP Stop Range
Last address in the range of IP addresses assigned to DHCP clients.
Subnet Mask
Subnet mask used by DHCP clients.
Broadcast Address Broadcast address used by DHCP clients.
Gateway
Default routing gateway used by DHCP clients.
DNS 1
IP address of the primary DNS server offered to DHCP clients.
DNS 2
IP address of the secondary DNS server offered to DHCP clients.
DNS 3
IP address of the tertiary DNS server offered to DHCP clients.
Lease Time
Length of time that an IP address of a DHCP client remains valid. When
lease time has expired, the assigned IP address is no longer valid, and
renewal of the IP address assignment is required.
http://www.pepwave.com
28
Copyright © 2/26/13 Pepwave
User Manual
7.2 LAN
Select LAN, located under Configure on the left, to begin configuring a local area network for
your Pepwave access point.
7.2.1 LAN
http://www.pepwave.com
29
Copyright © 2/26/13 Pepwave
User Manual
LAN
LAN IP
IP address of your Pepwave access point.
LAN Subnet Mask Specifies the number of clients that can connect to your access point.
DHCP Server
Check to enable the DHCP server feature of your access point. Enabling
DHCP is the best option for most users. The following options will be
enabled once you have checked and enabled DHCP Server.
IP Start Range
First address in the range of IP addresses assigned to DHCP clients.
Default is 192.168.1.100
IP Stop Range
Last address in the range of IP addresses assigned to DHCP clients.
Default is 192.168.1.200.
Subnet Mask
Number of clients that can connect to your access point. This value
should match the value in LAN Subnet Mask. Default is 255.255.255.0.
Broadcast Address Broadcast address used by DHCP clients.
Gateway
Default routing gateway used by DHCP clients.
DNS 1
IP address of the primary DNS server offered to DHCP clients.
DNS 2
IP address of the secondary DNS server offered to DHCP clients.
DNS 3
IP address of the tertiary DNS server offered to DHCP clients.
Lease Time
Length of time that an IP address of a DHCP client remains valid. When
lease time has expired, the assigned IP address is no longer valid, and
renewal of the IP address assignment is required.
Reservation
Assigns an IP address to a specific MAC address. To add a new
reservation, enter MAC address and IP Address, then click Add. To
remove a reservation from the displayed list, click Delete.
http://www.pepwave.com
30
Copyright © 2/26/13 Pepwave
User Manual
7.2.2 DMZ
DMZ
DMZ
DMZ IP
Enable your AP One unit to become a DMZ device.
Address used by external users to connect to your IP’s ports.
7.2.3 Port Forward
Port Forward
Name
IP
Port
Name for your port forwarding rule.
IP address to which ports are forwarded.
Choose TCP or UDP to forward the selected port or port range using the
specified protocol. Select port options from the drop-down menus on the
right, then click Apply to make the port forwarding rule active.
http://www.pepwave.com
31
Copyright © 2/26/13 Pepwave
User Manual
7.3 Wireless
Networks
Select Wireless Networks, located in the Configure section on the left, to display your
Pepwave access point’s SSID configuration.
General Wireless Network Settings
Wireless Network SSID of the virtual access point.
SSID
Wireless authentication and encryption used by your Pepwave access
Security Policy
point.
Default VLAN ID
Status
MAC Address
(BSSID)
VLAN ID tagged on all outgoing packets generated by the virtual AP (i.e.,
packets traveling from the Wi-Fi segment through your access point to the
Ethernet segment via the LAN port). If 802.1x is enabled, a per-user
VLAN ID can be specified in the authentication reply from the RADIUS
server. If a per-user VLAN ID is set, the default VLAN ID will be
overridden.
Virtual AP status of your access point. Displays Enable or Disable.
Detailed BSSID used by your access point.
http://www.pepwave.com
32
Copyright © 2/26/13 Pepwave
User Manual
Click Info to check Broadcast SSID, Web Portal Login, MAC Filter, Bandwidth Control, and
Layer 2 Isolation.
General Wireless Networks Settings – Info
Broadcast SSID
Displays whether or not your Pepwave access point’s SSID is broadcast.
Displays whether or not your access point can be accessed via Web
Web Portal Login portal.
MAC Filter
Displays whether or not your access point controls access with MAC
address filters.
Bandwidth Control Displays whether or not your access point is using bandwidth controls.
Layer 2 Isolation
Displays whether or not your access point is using Layer 2 isolation.
http://www.pepwave.com
33
Copyright © 2/26/13 Pepwave
User Manual
To add a new virtual AP, click the Add button. To change network details for a virtual AP, click
its Edit link, which give you access to Wireless Network Details, explained on the next page.
http://www.pepwave.com
34
Copyright © 2/26/13 Pepwave
User Manual
7.3.1 Wireless Network Details - Basic
Wireless Network Details - Basic
Enable
Select Yes to enable the virtual AP. Select No to disable. The virtual AP
is enabled by default.
Wireless Network SSID of the virtual AP as it appears to Wi-Fi clients.
SSID
Check Enable to allow Wi-Fi clients to scan the virtual AP’s ESSID. Note
that the BSSID (i.e., the MAC address of the virtual AP) cannot be hidden
Broadcast SSID from the scan. To associate with the virtual AP, clients must specify the
correct ESSID upon association. Broadcast SSID is enabled by default.
Security Level
Configures wireless authentication and encryption methods used by the
virtual AP. Available options are Open - No Encryption, Static WEP,
802.1X, WPA-TKIP, and WPA2-AES:CCMP. For details on setting
encryption options, please see Static WEP Parameters, 802.1x
Parameters, WPA Parameters in the following sections.
http://www.pepwave.com
35
Copyright © 2/26/13 Pepwave
User Manual
7.3.1.1 Static WEP Parameters
The configuration of Static WEP parameters enables pre-shared WEP key encryption. Please
note that static WEP offers weak security and does not support authentication.
Static WEP Parameters
Key Size
Choose 40 bits (64-bit WEP) or 104 bits (128-bit WEP). When using the
WDS setting, 128 bits will also be available.
Key Format
Choose ASCII or HEX.ASCII can be applied only to encryption keys that
are manually entered. HEX can be applied to encryption keys that are
manually entered or automatically generated.
Passphrase
Combination of words and characters used to generate an encryption
key. Click Generate Key to create the key.
Encryption Key
User-specified encryption key value. For ASCII format, key length is
either 5 or 13. For HEX format, key length is either 10 or 26.
Shared Key
Authentication
Check to enable shared key authentication. Default is disabled, meaning
open authentication is used.
http://www.pepwave.com
36
Copyright © 2/26/13 Pepwave
User Manual
7.3.1.2 802.1X Parameters
The configuration of 802.1X parameters enables RADIUS-based 802.1X authentication with a
dynamic WEP key.
802.1x Parameters
802.1X Version
Choose v1 or v2 of the 802.1x EAPOL. When v1 is selected, both v1 and
v2 clients can associate with the access point. When v2 is selected, only
v2 clients can associate with the access point. Most modern wireless
clients support v2. For stations that do not support v2, select v1. Default
is v2.
WEP Key Size
Choose 40 bits or 104 bits.
Re-keying Period
Length of time throughout which the broadcast key remains valid. When
the re-keying period expires, the broadcast key is no longer valid, and
broadcast key renewal is required. Default is 14400 seconds (four hours).
0 disables re-keying.
http://www.pepwave.com
37
Copyright © 2/26/13 Pepwave
User Manual
7.3.1.3 WPA parameters
The configuration of WPA parameters enables WPA-TKIP, WPA2-AES:CCMP, and WPA-TKIP
and WPA2-AES:CCMP. To enable WPA and WPA-PSK, configure WPA-TKIP. To enable
WPA2 and WPA2-PSK, configure WPA2-AES. When WPA or WPA2 is configured, RADIUSbased 802.1x authentication with TKIP encryption method is enabled. When using this
configuration, Pre-Shared Key should be disabled.
The security level of this method is known to be very high.
When WPA-PSK or WPA2-PSK is configured, a Pre-Shared Key or Passphrase is used for
data encryption and authentication. When using this configuration, Pre-Shared Key should be
enabled. Key length must be from 8 to 63 characters.
The security level of this method is known to be high.
http://www.pepwave.com
38
Copyright © 2/26/13 Pepwave
User Manual
7.3.2 Web Portal Login
Once your Pepwave access point is registered with Pepwave InControl, you can apply
configurations, update firmware, and monitor network activity remotely using this centralized
management system. For details, see http://www.pepwave.com/products/incontrol/.
7.3.2.1 Tip: How to Set Up a Pepwave AP Guest Portal in InControl
To set up a Guest Portal, (1) enable the guest portal function and (2) create guest accounts
and set up a portal page.
Step One: Enable the Guest Portal
1. Log into InControl with your username and password. 
2. Click the Configuration tab, then locate the desired configuration profile.
http://www.pepwave.com
39
Copyright © 2/26/13 Pepwave
User Manual
3. To find your wireless network, click the Wireless tab. Next, check Wireless Networks,
then click More….
4. Click the name of the SSID you have set up. Note: If you have not added a wireless
network, click New wireless network... to create one.
5. On the Edit a wireless network page, click the Web Portal Login tab. Click Enable to
enable Web portal logins. Click OK to continue.
6. Click Save to save your changes.
7. Click the Web Admin tag and setup the web access as follows:
Web Access Protocol: HTTPS
Management Port: 443
HTTP to HTTPS Redirection: Enable
8. Click Save to save your settings.
Step Two: Create Guest Accounts and Set Up a Portal Page
9. Go to Guest Portal and Accounts by clicking on the link on the left.
10. You can generate more than one account at one time. Change the parameters in No.
of accounts to be generated, Username prefix, Sequence number suffix, and Time
Quota. Default time limit is set to 24 hours. You can change the time limit.
11. Click Generate.
12. You should now have some guest accounts generated as shown Unused Guest
Accounts. You can download account information in CSV format by clicking All,
Generated today, or Not generated today.
13. A standard portal page will be generated automatically after guest accounts are
generated (http://guest.pepwave.com). You can customize the portal page by clicking
on the Portal Page Customization tab, where you can upload your logo image and
enter a message for guests. Preview your portal page, then publish it.
Your guest accounts and portal page are now ready for use.
http://www.pepwave.com
40
Copyright © 2/26/13 Pepwave
User Manual
7.3.3 Guest Protect
http://www.pepwave.com
41
Copyright © 2/26/13 Pepwave
User Manual
Wireless Network Details - Guest Protect
Enables settings to Block all private IPs / Custom Subnet / Block
Exception. If you have selected Block all private IPs or Custom Subnet,
these IPs / subnets will be blocked no matter what Firewall Mode is
selected. When Block Exception is selected, IPs entered will be excluded
from the blocking list.

Block LAN Access
Block
SpeedFusion™
Bandwidth
Management
Upstream Limit

Private IP – Blocks common private IPs:
o 192.168.0.0 – 192.168.255.255
o 172.16.0.0 – 172.31.255.255
o 10.0.0.0 – 10.255.255.255
Custom Subnet – Blocks user-specified IP subnets.

Block Exception – Blocks all IPs except those specified.
Block SpeedFusion™ traffic.
Enables settings to control upstream and downstream limits. You can
control bandwidth usage Per VAP or Per Client.
Upstream bandwidth limit in kbps. Default is 0: Unlimited.
Downstream Limit Downstream bandwidth limit in kbps. Default is 0: Unlimited.
Maximum Number Maximum number of clients that can be simultaneously connected to your
Pepwave access point. Default is 0: unlimited.
of Clients
Enables one of three firewall modes: Lockdown, Flexible, and Disable.
Lockdown – Block all traffic except pre-defined exceptions.
Firewall Mode
Flexible – Allow all traffic except pre-defined exceptions.
Disable – Firewall mode is disabled. (Default)
Exceptions
Specifies exceptions when Lockdown or Flexible Firewall Mode is
selected. Exceptions can be added by type, including Port, Domain, IP
Address, MAC Address, and Application/Service. Click Apply to save
changes and make them active.
http://www.pepwave.com
42
Copyright © 2/26/13 Pepwave
User Manual
7.3.4 MAC Filter
These settings allow your administrator to control access using Mac address filtering. Choose
from None, Deny all except listed, Accept all except listed, and RADIUS MAC
Authentication. To delete MAC addresses from the list, select them, then click Delete
highlighted. To add MAC addresses to the list, select them, then click <<
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:02:26 17:24:15+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2013:02:26 17:58:59+08:00
Metadata Date                   : 2013:02:26 17:58:59+08:00
Format                          : application/pdf
Creator                         : Craig Zimmerman
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:4185a173-2cd1-474c-8a79-3a9891b21b61
Instance ID                     : uuid:4d34059c-96d2-4db4-bc58-036bfacd381b
Page Count                      : 73
Language                        : en-US
Author                          : Craig Zimmerman


EXIF Metadata provided by EXIF.tools
FCC ID Filing: U8G-P1371

Navigation menu