Pitco Frialator Exploded Parts Gas Fryer Vf35 Users Manual L22 382 R1
VF35 to the manual 94aa9603-deaa-4b2e-8635-88d702f42441
2015-02-06
: Pitco-Frialator Pitco-Frialator-Exploded-Parts-Gas-Fryer-Vf35-Users-Manual-518744 pitco-frialator-exploded-parts-gas-fryer-vf35-users-manual-518744 pitco-frialator pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Model #: ___________________________ Serial #: ___________________________ Date Purchased: ____________________ Exploded Parts Manual VF35 Gas Fryer Models L22-382 Rev 1 (8/14) ENGLISH IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Exploded Parts-VF35 Gas Model TO THE PURCHASER, OWNER AND STORE MANAGER Please review these warnings prior to posting them in a prominent location for reference Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information from your local gas supplier. WARNING DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance. WARNING Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by an unauthorized and unqualified personnel will void the warranty. WARNING Installation and all connections must be made according to local codes in force. In the absence of local codes in North America, the installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or the Natural Gas and Propane Installation Code CSA B149.1 as applicable. In Australia, the appliance must be installed in compliance with AS/NZS 5601. WARNING During the warranty period if a customer elects to use a non-original part or modifies an original part purchased from Pitco and/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center. WARNING This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable WARNING Adequate means must be provided to LIMIT the movement or this appliance without depending on the gas or electrical cord connection. Single appliances equipped with legs must be stabilized by installing anchor straps. All appliances equipped with casters must be stabilized by installing restraining chains. WARNING DO NOT alter or remove structural material on the appliance to accommodate placement under a ventilation hood. WARNING If the appliance is equipped with a power cord and it is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard. WARNING The power supply must be disconnected before servicing, maintaining or cleaning this appliance. WARNING The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet. WARNING DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces or liquids. WARNING DO NOT use an open flame to check for gas leaks! WARNING DO NOT sit or stand on this appliance. The appliance’s front panel, tank, splash back, tank cover, work shelf, drain board is not a step. Serious injury could result from slipping, falling or contact with hot liquids. WARNING NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious injury could result from slips, trips or from contacting hot liquids. WARNING The oil/shortening level should NOT fall below the minimum indicated level line at any time. The use of old shortening can be dangerous as it will have a reduced flash point and be more prone to surge boiling. WARNING The contents of the crumb catch and/or filter pan of any filter system must be emptied into a fireproof container at the end of the frying operation each day. Some food particles can spontaneously combust into flames if left soaking in certain oil/shortening materials. WARNING Completely shut the appliance down when shortening/oil is being drained from the appliance. This will prevent the appliance from heating up during the draining and filling process. Serious injury can occur. WARNING This appliance is intended for indoor use only. WARNING DO NOT operate appliance unless all panels and access covers are attached correctly. WARNING It is recommended that this appliance be inspected by a qualified service technician for proper performance and operation on a yearly basis. WARNING There is an open flame inside this appliance. The unit may get hot enough to set nearby materials on fire. Keep the area around the appliance free from combustibles. WARNING DO NOT supply the appliance with a gas that is not indicated on the data plate. If you need to convert the appliance to another type of fuel, contact your dealer. WARNING If gas flow to appliance is interrupted, or pilots extinguish, wait 5 minutes before attempting to relight the pilot to allow any residual gas in appliance to dissipate. WARNING Ensure that the appliance can get enough air to keep the flame burning correctly. If the flame is starved for air, it can give off a dangerous carbon monoxide gas. Carbon monoxide is a clear odorless gas that can cause suffocation. WARNING Never add oil to the appliance when it is at operating temperature. Splashing hot oil can cause severe injuries. WARNING Never add water to hot oil. Violent boiling can occur causing severe injury. WARNING This appliance is intended for professional use only and should be operated by fully trained and qualified personnel. WARNING To avoid splashing of hot liquid when installed, this fryer must be restrained either by the manner of installation, or with adequate ties to prevent tipping. WARNING An appliance equipped with casters and a flexible gas line must be connected to the gas supply with a quick disconnect device. In North America, gas appliances equipped with casters must be installed with connectors that comply with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69.CSA 6.16 Latest Edition. This connection should include a quick disconnect device that complies with the Standard for Quick Disconnect Devices for Use With Gas Fuel ANSI Z221.41.CSA 6.9 Latest Edition. In Australia, an appliance equipped with casters and a flexible gas line must be connected to the gas supply with a quick disconnect device that complies with AS 4627. The hose must comply with AS/NZS 1869 and be class B or D and have a restraining cable. The restraining cable must not exceed 80% of the length of the flexible gas line. L22-382 Rev 1 (08/14) Exploded Parts-VF35 Gas Model NOTICE In the event of problems or questions about your order, contact the Pitco Frialator factory at (603) 225-6684. In the event of problems or questions about your equipment, contact the Pitco Frialator Authorized Service and Parts representative (ASAP) covering your area, or contact Pitco at the number listed above. Mailing Address Pitco Frialator P. O. Box 501 Concord, NH 03302-0501 Shipping Address Pitco Frialator 10 Ferry Street Concord, NH 03301 L22-382 Rev 1 (8/14) 3 Exploded Parts-VF35 Gas Model TABLE OF CONTENTS A) FRYER EXPLODED VIEWS .......................................................................................................................... 5 FRYER EXPLODED PARTS LIST/VIEW .....................................................................................................................................5 B) TANK & FLUE ................................................................................................................................................ 6 TANK & FLUE EXPLODED PARTS LIST/VIEW ...........................................................................................................................6 C) BURNER ASSEMBLY ................................................................................................................................... 7 BURNER ASSEMBLY EXPLODED PARTS LIST/VIEW..................................................................................................................7 D) GAS TRAIN.................................................................................................................................................... 8 GAS TRAIN DRAWING PARTS LIST .........................................................................................................................................8 GAS TRAIN DRAWING VIEW ...................................................................................................................................................9 E) GAS CONVERSION KITS ........................................................................................................................... 10 GAS CONVERSION KITS QUICK REFERENCE ........................................................................................................................10 GAS CONVERSION KITS QUICK REFERENCE DRAWING .........................................................................................................11 F) STANDARD CABINET DRAWING............................................................................................................... 12 STANDARD CABINET DRAWING LIST ....................................................................................................................................12 STANDARD CABINET PARTS DRAWING .................................................................................................................................13 G) ACCESSORIES ........................................................................................................................................... 14 ACCESSORIES DRAWING PARTS ..........................................................................................................................................14 ACCESSORIES DRAWING PARTS LIST ..................................................................................................................................15 4 L22-382 Rev 1 (8/14) Exploded Parts-VF35 Gas Model A) FRYER EXPLODED VIEWS Fryer Exploded Parts List/View ITEM # PART PART DESCRIPTION 1 2 See Drawing B See Drawing C See Drawing D See Drawing E See Drawing F See Drawing G PP10023 B8030101 Tank & Flue Burner Assembly Gas Train Gas Conversion Cabinet Assembly Accessories SCR,10-24 X 3/8 SLF TAP PG,ASSY HI-LIM & TSTAT SG14 Page 6 Page 7 Page 8-9 Page 10-11 Page 12/13 Page 14/15 L22-382 Rev 1 (8/14) 5 Exploded Parts-VF35 Gas Model B) TANK & FLUE Tank & Flue Exploded Parts List/View ITEM # 1 2 3 4 5 6 7 6 PART PART DESCRIPTION B3333301 PP10368 P0092300 P0075400 B3506301 PP11326 A1406702 TK,WLDMT VF35 VLV,BALL 1-1/4INCH NONLOCKING NUT, HEX 10-24 KEP ZN SCR,10-24 X 1/2 SELF TAP FL,WLDMT VF35 SCR,#14 X 1-1/2 HEX WH TAP CLP,LIM/TSTAT L22-382 Rev 1 (8/14) Exploded Parts-VF35 Gas Model C) BURNER ASSEMBLY Burner Assembly Exploded Parts List/View ITEM # PART PART DESCRIPTION 1 2 3 A8033201 B8035301 A7513706 P6071354 N/A A8031701 A8034901 60127501 60129701 B8041901 B8046101 N/A A8031601 A8047601 A8031701 A8034901 PIPING, BURNER BRACKET SGC PIPING, MANIFOLD WELDMENT ORIFICE, 2.2MM NAT PG,BNR VF35 #54 ORF LP PLUG, STEEL .125 MNPT RECESSED PIPING, BURNER SHIELD-NAT PIPING, BURNER SHIELD-LP FITTING, ADAPTER MALE FLARE X .500 FPT FITTING, BURNER PIPING, BURNER INCONEL 601 SCREEN SG-NAT PIPING, BURNER INCONEL 601 SCREEN SG-LP SCREW, 10-24 X .375 SELF TAPPING PIPING, CROSSOVER PG,GSKT BNR BRKT SGC,VF35 PIPING, BURNER SHIELD, LH -NAT PIPING, BURNER SHIELD, LH - LP 4 5 6 7 8 9 10 11 12 L22-382 Rev 1 (8/14) 7 Exploded Parts-VF35 Gas Model D) GAS TRAIN Gas Train Drawing Parts List ITEM# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 8 PART# 60125901 60127601 A8029001-C 60127401 P0007300 A8029105 60128101 60128015 60125201-C 60125202-C A8035302 60128801 60128802 60119001 60088001 PP10084 A8028601-C 60125501 P0190700 PP10539 PP10687 B6744401 60125401 PART DESCRIPTION TUBE, VENT GAS VALVE FITTING,ADAPTER FEMALE SWIVEL X 1/2 MPT PIPING, VALVE SHIELD FITTING, ELBOW MALE FLARE X MPT SCREW, 8-32 X 1/4 HEX HEAD SLOTTED ZN COUPLING, GAS SUPPLY SHORT SG, MKG VALVE, GAS SUPPLY SHUTOFF TUBING, FLEXIBLE WITH FITTINGS 22 GAS VALVE, GAS VS820 NAT VALVE, GAS VS820 LP PIPING, PILOT BRACKET SG14 SG14R PILOT, REVERSE STANDING NAT SG PILOT, REVERSE STANDING LP SG TUBE, FLEXIBLE WITHOUT FITTINGS 18 X 1/4 OD SCREW, 10-32 X 1/4 HEX HEAD SST SWITCH, HI-LIMIT LCM05030 PIPING, BRACKET HI-LIMIT-THERMOSTAT SG MILLIVOLT THERMOPILE, MILLIVOLT CLIP, CANOE FASTEX KNOB, THERMOSTAT WITH OFF, 200-400F & 100-200C SCREW, 6-32 X 313 THRUSS HEAD PHILLIPS ZN WIRING, MILLIVOLT HI-LIMIT & THERMOSTAT SG THERMOSTAT, RX MILLIVOLT 200-400F L22-382 Rev 1 (8/14) Exploded Parts-VF35 Gas Model Gas Train Drawing View L22-382 Rev 1 (8/14) 9 Exploded Parts-VF35 Gas Model E) GAS CONVERSION KITS Gas Conversion Kits Quick Reference NATURAL TO LP ITEM # PART # PART DESCRIPTION 1 B8043267-C PG,CONV VF35 NAT TO LP 1A P6071354 ORIFICE TIP #54 DIA 1B 60126502 GAS VALVE CONV KIT VS820 NAT TO LP 1C P6071665 ORFICE PILOT SPUD LP .016 DIA 1D PP10426 GAS CONV NOTICE LABEL NAT TO LP 1E B8046101 PG,BNR INC 600,20X20 SCRN 1F A8034905 PG,COLLAR BNR LP ST MG,SGH 1G A8034901 PG,COLLAR BNR LP FT LH MG,SGH QTY 3 1 1 1 3 1 1 LP TO NATURAL ITEM # 1 10 PART # PART DESCRIPTION QTY B8043266-C PG,CONV VF35 LP TO NAT 1A A7513706 ORIFICE TIP 2.2MM 3 1B 1 60126501 1C GAS VALVE CONV KIT VS820 LP TO NAT P6071666 ORFICE PILOT SPUD NAT .022 DIA 1 1D PP10427 1 1E 1F 1G A8031801 PG,BNR SHLD SG14T* A8031701 PG,BNR SHLD LH DG14 GAS CONV NOTICE LABEL LP TO NAT L22-382 Rev 1 (8/14) 1 1 Exploded Parts-VF35 Gas Model Gas Conversion Kits Quick Reference Drawing L22-382 Rev 1 (8/14) 11 Exploded Parts-VF35 Gas Model F) Standard Cabinet Drawing Standard Cabinet Drawing List ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 N/A 21 22 23 24 25 26 27 NOT SHOWN (INCLUDES ITEMS: 1-6 & 21) 12 PART # A1512002-C A1512004-C A1635101-C A1635201-C A1849601-C A1235201-C A1105402-C A3526002-C A4106902-C B2304101-C B3630901-C B3632301-C B3801801 B3802401 A1847002 60132001 P6071300 PP11006 SEE DRAWING G SEE DRAWING G SEE DRAWING G PP10023 P0075400 P0020600 60125801 60118201 P0093300 B1822302-C PART DESCRIPTION CABINET SIDE LEFT-HAND CABINET SIDE RIGHT-HAND CABINET BACK SG14,SG14R,SG14T CABINET BACK BOTTOM SG14,SG14R,SG14T CABINET FRONT SPACER SG14,SG14R,SG14T CABINET FRONT BOTTOM BRACE SG14,SG14R,SG14T BASKET HANGER SG14,SG14R,SG14T FLUE REAR HEAT DEFLECTOR SG14 SPLASH BACK SG14,SG14R,SG14T DOOR ASSEMBLY SG14,SG14R,SG14T FRONT PANEL TOP DECK WELDMENT SG14,SG14R,SG14T FRONT PANEL ASSEMBLY SG14,SG14R,SG14T HINGE WELDMENT LOWER RIGHT HAND SG* HINGE WELDMENT UPPER RIGHT HAND SG* BRACKET MAGNETIC CATCH STUD SPLASH BACK SCREW ON MAGNETIC CATCH STANDARD HANDLE DOOR RECESSED PLASTIC CASTER SWIVEL 9" NON-LOCKING CASTER SWIVEL 9" LOCKING LEG SET W/HARDWARE 9" (4-PACK) SCREW 10-24 X 3/8 SELF TAPPING SCREW 10-24 X 1/2 SELF TAPPING SCREW 1/4-20 X 5/8 HEX HEAD CAP ZN SCREW 10-24 X 3/8 TRUSS HEAD SLOTTED LOCKING SST BOLT 1/4-20 X 3/8 HEX FLANGE HEAD NUT HEX (KEP) 10-24 ZN CABINET ASSEMBLY STAND ALONE SG14,SG14R,SG14T L22-382 Rev 1 (8/14) Exploded Parts-VF35 Gas Model Standard Cabinet Parts Drawing L22-382 Rev 1 (8/14) 13 Exploded Parts-VF35 Gas Model G) ACCESSORIES Accessories Drawing Parts ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 14 PART # A3301001 PP10056 A2510101 CONTACT PITCO CONTACT PITCO CONTACT PITCO CONTACT PITCO CONTACT PITCO 60132401 B3900704 60115301 PP10814 B3901504 B3902302 PP10815 B3902304 P6072145 P6072146 P6072147 P6072143 P6072144 P6073148 A4500201 B7425301-C A1842302-C B2101518-C A3340601-C PART DESCRIPTION CLEAN-OUT ROD CLEANING BRUSH NYLON DRAIN EXTENSION FRONT WORKSHELF SIDE WORKSEHELVE/DRAINBOARD REAR WORKSHELF REAR WORKSHELF INSERT SPLASH GUARD SIDE 9" LEG 9" LEG SET OF 4 WITH HARDWARE 9" LEG WITH BOTTOM BOLT FLANGE ADJUSTABLE 9" CASTER NON-LOCKING 9" CASTER SET OF 4 (2 LOCKING, 2 NON-LOCKING) 9" RIGID CASTER NON-LOCKING 9" CASTER LOCKING 9" RIGID CASTER LOCKING TWIN BASKET TWIN BASKET FINE MESH TRIPLE BASKET SG14, SG14R SQUARE BULK BASKET FRONT HANDLE SQUARE BULK BASKET FINE MESH FRONT HANDLE TUBE RACK TUBE SCREEN FISH GRID SG14 CABINET BACK TANK COVER ASSEMBLY TANK BACK STANDOFF SG14 L22-382 Rev 1 (8/14) Exploded Parts-VF35 Gas Model Accessories Drawing Parts List L22-382 Rev 1 (8/14) 15 In the event of problems with or questions about your order, please contact the Pitco Frialator factory at (603) 225-6684 World Wide www.pitco.com In the event of problems with or questions about your equipment, please contact the Pitco Frialator Authorized Service and Parts representative (ASAP) covering your area, or contact Pitco at the numbers listed to the left. MAILING ADDRESS – P.O. BOX 501, CONCORD, NH 03302-0501 SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301 L22-382 Rev 1 (8/14)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : PKingsbury Create Date : 2014:09:04 12:01:50-04:00 Modify Date : 2014:09:04 12:01:50-04:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - L22-382 R1 VF35 Exploded Parts Manual.doc Creator : PKingsbury Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:6899c98a-35d9-470c-875c-983c8ed56faa Instance ID : uuid:7049ec81-6406-480d-8a04-ccd3a405de05 Page Count : 16EXIF Metadata provided by EXIF.tools