Pitsco Education 40377TX 2.4 GHZ 4 CHANNEL WIRELESS JOYSTICK GAMEPAD User Manual

Pitsco Education 2.4 GHZ 4 CHANNEL WIRELESS JOYSTICK GAMEPAD

User manual

Download: Pitsco Education 40377TX 2.4 GHZ 4 CHANNEL WIRELESS JOYSTICK GAMEPAD User Manual
Mirror Download [FCC.gov]Pitsco Education 40377TX 2.4 GHZ 4 CHANNEL WIRELESS JOYSTICK GAMEPAD User Manual
Document ID2381021
Application ID4bCC/LbzYAd5XmnlOVMW3g==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.76kB (234487 bits)
Date Submitted2014-09-07 00:00:00
Date Available2014-09-07 00:00:00
Creation Date2014-09-02 16:22:01
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2014-09-02 16:22:01
Document TitleMicrosoft Word - User Manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

User Manual
Products Information :
Product Model Number : 40377
Product description : 2.4 GHZ 4 CHANNEL WIRELESS JOYSTICK GAMEPAD
Trade Mark : Tetrix
Product manufacturer : GRAND WING SYSTEM CHINA, INC.
The main parameters :
1.1 Working frequency:2404 MHz ~2474MHz
1.2 modulation method:GFSK
1.3 TX antenna:built in
1.4 TX gain:0dBi
1.5 voltage TX:6V (AA×4s)
1.6 current TX:210mA±10%(6V)
1.7 RX sensitivity:‐12dBm
1.8 RX antenna:built in (Gain 0 dBi)
1.9 RX operating voltage:6V
1.10 RX working current:22mA±10%(6V)
1.11 The RX weight:5.5g±10%
1.12 Control distance:100~120M(RX from the ground 1m)
2. The function of TX(see below)
TX
RX
3. Binding mode
3.1 ensure that the RX was turned off;
3.2 Turn on the TX,press the “connect botton” 2 seconds,until the
green LED light start to flash ;
3.3 RX insert the battery pack, the red LED lights start flashing, press
the "connect button" 22 seconds, until the red LED to rapid
flashing,now the TX and received start binding
3.4 Once the TX and RX stop flashing and turn to lighting,it means
binding success
4. Other instructions
4.1 TX low voltage alarm function: when the TX battery voltage lower
to 4.1 V, the TX buzzer began to make noise, and at the same time,
the LED get flashing, indicate the user to replace the batteries
immediately.
4.2 Put on the battery as the mark, otherwise it will not work
4.3 Take out the battery from TX when you don’t use it, to avoid
battery leakage and damage TX components
4.4 Connect the servos and battery to the RX, please pay attention to
the channel position, otherwise can not be control。
FCC INFORMATION
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the receiving measures:
Reorient or replace relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to
operate the equipment.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:09:02 16:22:01+08:00
Create Date                     : 2014:09:02 16:22:01+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.doc
Creator                         : Administrator
Document ID                     : uuid:6910f7ec-ce4d-42e4-91cf-137d2a327879
Instance ID                     : uuid:e0081ba0-6898-4337-9d69-29a32b31ac8e
Page Count                      : 3
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ACZQ-40377TX

Navigation menu