Pittasoft DR750LW-2CH Car Dashcam User Manual 9 DR750LW 2CH
Pittasoft Co., Ltd. Car Dashcam 9 DR750LW 2CH
User Manual
BLACKVUE LCD
BLACKVUE LCD I 3
Table of Contents
Introduction to the Manual
4
Getting Started
Cautions for Safety 5
Checks for the External GPS 8
Checks for the microSD Card 8
Management During Summer Season 9
Product Features 9
Package Components 10
Name of Each Part 11
Attach & Detach the Mounting Holder
of the Front View Camera 13
Attach & Detach the Mounting Holder
of the Rear View Camera 13
Install the BlackVue
Checking Installation Position 14
Insert & Remove the microSD Card 15
Installation 16
Video Recording
Normal Recording 18
Parking Recording 18
Event Recording 19
Emergency Recording 19
Simple Video Playback
Playback in BlackVue 20
Playback Using a microSD Card 21
Playback Using the BlackVue App 23
Using the BlackVue
Switch to Live View 25
Settings 25
Using the BlackVue
Screen Description 31
Viewer
Video Playback 33
Settings 39
Firmware Upgrade
44
Product Specifications
Product Specications 45
& Standards
LED Indicators 47
Recording Time 48
4
Introduction to the Manual
Thank you for purchasing this product manufactured by Pittasoft Co., Ltd.
This document contains information on how to operate this product. Before using the product, make sure to read through this document so as to use the product properly. In
order to enhance the performance of the product, the contents of this document may be changed without prior notice.
Copyright & Trademark
yThis document is protected by the Copyright Act, and legal protection is
guaranteed to all rights.
yIt is prohibited to reproduce, copy, modify, or translate this document without
permission.
y BlackVue is a registered trademark of Pittasoft Co., Ltd.
Pittasoft Co., Ltd. reserves the rights regarding all works related to the BlackVue
brand such as product design, trademarks, and product-promotional images. It
is prohibited to reproduce, copy, or use related works without the permission of
Pittasoft Co., Ltd. Any violation may be penalized in accordance with the relevant
regulations.
Warranty & Support
yThis product records and saves videos on vehicle accidents; however, it is not
guaranteed to record all accidents. Accidents with a light impact that is not
enough to activate the impact detection sensor may not be recorded.
yIn accordance with Personal Information Security Law & related acts, Pittasoft
Co., Ltd. is not accountable for any issues or problems due to the illegal use of
this product.
yA video recorded by this product constitutes the secondary data that may
help to determine the circumstances of an accident. Pittasoft Co., Ltd. is not
accountable for any loss or damage caused by an accident.
BLACKVUE LCD I 5
Getting Started
Cautions for Safety
The purpose of these cautions is to maintain user safety and to avoid damage to property. Please make sure to read through this document so as to use the product properly.
Danger
Death or property damage can be caused for users if the following directions are not followed:
yDo not use a damaged or altered power cord. Use the cords provided by the
manufacturer.
Otherwise, it can cause an explosion, re, or malfunction.
yDo not operate this product with wet hands.
It can cause an electric shock.
yDo not install it in a place with high humidity, or combustible gases or
liquids.
It can cause an explosion and re.
yDo not disassemble, repair, or alter the product yourself.
It can cause re, an electric shock, or malfunction. For internal inspection and
repair, call your customer service center.
yIf any foreign matter gets inside the product, detach the power cord right
away.
Call the customer service center for repair.
yDo not operate the product while driving.
It can cause an accident. Stop or park your car in a safe place to operate it.
yDo not install the product where it can interfere with the driver's vision.
It can cause an accident.
6
Warning
Death or serious injury can be caused for users if the following directions are not followed:
yUse the correct input voltage.
Otherwise, it can cause an explosion, re, or malfunction.
yConnect the power cord rmly so that it cannot easily be disconnected.
Otherwise, it can cause re.
yDo not cover the product with cloth or blanket.
It can cause the external deformation of the product or re. Use the product and
peripherals in a place where ventilation is ensured.
yDo not leave the product where infants, children, or pets can reach it.
They might swallow small components, or their saliva could get into it and cause
an explosion due to a short circuit.
yWhile cleaning the inside of the car, do not spray water or wax directly onto
the product.
It can cause re, an electric shock, or malfunction.
yIf smoke or an unsual smell is emitted from the power cord, detach it
immediately.
Call the customer service center or the reseller.
yKeep the terminal of the power cord clean.
A dirty terminal can cause excessive heat and re.
BLACKVUE LCD I 7
Caution
Injury or property damage can be caused for users if the following directions are not followed:
ySince microSD cards are consumables, replace them with new ones after
prolonged use.
If a microSD card is used for a long period of time, a video may not be properly
recorded. Thus, check regularly if recording is being properly done. If not, replace
the card with a new one.
yClean the lens on a regular basis.
If the lens is not clean, it may aect recording.
yWhile data are being saved into the microSD card or the card is reading
data, do not detach the card.
The data may be damaged or malfunction caused.
yIt is recommended to install this product at the installation spot. The
installation spot can be checked from the website of BlackVue (www.
blackvue.com).
yWhen this product does not need to be used for a long period of time, it is
recommended to detach the power cord.
yDo not press the LCD screen with a sharp or pointed object.
yDo not press the LCD screen too rmly.
yRisk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
yDo not spray a detergent directly onto the exterior of this product.
It can discolor or have a crack. Also, the product can have an error.
yIf the product is used outside the optimal temperature range (0C ~ 60C),
performance can degrade or malfunction can be caused.
yCheck if this product has been properly installed.
The product can have malfunction by being dropped due to vibration, or you can be
injured.
yWhile entering or exiting a tunnel, at a daytime in the face of bright
sunlight, or at dark night with no light, the quality of a recorded video can
deteriorate.
yIf the product is damaged or the power supply is cut due to an accident, a
video may not be recorded.
yExcessively tinted windshield glass can distort the recorded video or cause
it to be indistinct.
yProlonged use of the product can increase the interior temperature and
cause burns.
8
Checks for the External GPS
Even if the GPS isn’t working the video is recorded, but position coordinates and
driving speed are not recorded. When used for the rst time, or when the product
is not used for three consecutive days, it will take some time for GPS to find the
current position.
If the recorded video is checked using a viewer program, or the BlackVue
application, and an error occurs with the GPS time, it is recommended to turn on
and o the power after a GPS signal is received.
Comply with the following for an uninterrupted GPS signal:
yDo not have the windshield glass tinted with a metallic component.
yBe careful with the installation of devices that may interfere with GPS reception
(e.g. some wireless starters & alarms and MP3/CD players).
yDo not use the product simultaneously with other devices that use GPS signals.
yCloudy weather can interfere with GPS reception.
yGPS reception can be poor when driving under overpasses or in tunnels,
underpasses, streets with skyscrapers or high rise buildings, generating stations,
military bases, or broadcasting transmitters, etc
Checks for the microSD Card
Refer to the following for trouble-free use of microSD card:
yIt is recommended to format it on a weekly basis.
yIf the recorded video breaks up, format the microSD card.
yIn order to ensure the reliable use of the card, format the card by using the
official program recommended by the SD Card Association. For detailed
information, see the website of BlackVue (www.blackvue.com).
yBefore formatting it, copy important les to other storage media.
yThe microSD card can be formatted in BlackVue without connection to a PC.
(Page 30)
yInsert the formatted microSD card into the product. Then, the microSD card will
be automatically initialized and the rmware installed on it.
yInsert or remove the microSD card only when the product is turned o.
yMicroSD cards are consumables, and warranted for six months.
yIf a microSD of another company is used, a compatibility issue may occur.
Therefore, you must use the original microSD card from Pittasoft Co., Ltd.
yIf Power Magic Pro, a continuous power supply unit, is used, the microSD
may not be able to be used for a long period of time.
yIf a 64GB microSD card needs to be used, format it using BlackVue Viewer and
insert it into the product. (Page 31)
BLACKVUE LCD I 9
Management During Summer Season
yPark in a shady place or an indoor parking lot.
yIf an outdoor parking lot is used, park away from direct sunlight. Also, open the
window by 1 or 2 cm.
yIf the product is exposed to direct sunlight, cool the product down for a specic
amount of time before use.
yDuring summer, the temperature inside the vehicle may rise to 80°C-90°C due to
sunlight. Keep the inside of the vehicle at an appropriate temperature.
Product Features
Full High Denition and Smooth Image
This product allows you to record front view, at full high denition
and rear view high denition videos, to ensure smooth images.
Real-Time Image Check Due to Touch LCD
This product enables the PIP feature, which allows you to easily
operate, using the 4.0” touch LCD; and view front and rear view
screens simultaneously.
Automatic Power-O at High Temperature
Due to the built temperature detection sensor, once the black
box reaches a high temperature, automatic power supply will be
suspended to protect the product.
Prevention of Electric Drainage in Batteries for the Vehicle
Once the power is below the current value set in the product,
automatically power supply will be stopped to prevent the batteries
for the vehicle from drainage.
10
SONY EXMOR CMOS Sensor
Due to the SONY image sensor that ensures excellent image quality,
clearer identication is ensured during the day and night
Coaxial Cable For Excellent Data Transfer
For reliable data transfer, high quality coaxial cables are used to
prevent missing data and data loss.
High Denition Wide-Angle Lens
Using a high denition wide-angle lens, accidents can be accurately
recorded.
Premium Design
BlackVue is designed with stylish and sophisticated premium micro-
patterns.
Diverse Recording Modes
Four diverse recording modes according to user convenience (e.g.
Emergency/Normal/Event/Parking)
Package Components
Front View Camera Manual
Power Cable Cable Clips (8 EA)
microSD Card Reader Rear View Camera
BLACKVUE LCD I 11
Double-Sided Tape
for the Mounting Holder
microSD Card
(BlackVue Viewer and User Guide
Included)
Rear View Camera Connection Cable
Note
yPictures of the components may dier from the actual.
yTo enhance the performance of the product, the components may be
changed without prior notice.
yThe additional package components and parts sold separately can be
purchased from the website of BlackVue (www.blackvue.com).
Name of Each Part
Front View Camera
Mounting Holder
Camera Angle Control Bolt
Camera Lens
DC in (Power Terminal)
V in
(Terminal for
Connecting to the
Rear View Camera)
12
GPS
(External GPS Terminal)
LCD Screen
microSD Card Slot
Mounting Holder
Detachment Button
Wi-Fi LED
GPS LED
REC LED
Power Button
t1SFTTJOH4IPSU4UBSUTBOETUPQTWPJDFSFDPSEJOH
t1SFTTJOH-POH5VSOTPOPSPòUIFQPXFS
Note
yThe external GPS is sold separately.
Rear View Camera
Mounting Holder Camera Lens
V out
(Terminal for
Connecting to
the Front View
Camera)
Rear Security LED
BLACKVUE LCD I 13
Attach & Detach the Mounting Holder of the Front
View Camera
1
Press the mounting holder detachment button and pull the front view
camera.
2
Push the front view camera into the mounting holder to assemble the
mounting holder to front view camera.
Attach & Detach the Mounting Holder of the Rear
View Camera
1
Hold the mounting holder, and pull the rear view camera.
2
In order to assemble the mounting holder of the rear view camera, push the
rear view camera into the mounting holder until a clicking sound occurs.
14
Install the BlackVue
Checking Installation Position
1
It is recommended to install the front view camera next to the room mirror.
Clean any foreign substances and moisture from the place where the prod-
uct will be installed with a dry cloth.
2
It is recommended to install the rear view camera at the higher part of the
back window.
Note
yDo not install the product where it can interfere with the driver's vision.
yIt is recommended to install the product at the spot specied.
BLACKVUE LCD I 15
Insert & Remove the microSD Card
1
Insert the microSD card into the microSD card slot, of the front view camera,
in the direction as shown in the gure below:
2
In order to detach the microSD card, gently push the center of the microSD
card with your thumb and pull out the card. Make sure that the microSD
card does not spring out when detaching the card.
Caution
yDo not remove the microSD card while it is saving or reading data. This
may cause data damaged or malfunction.
yCopy important data to other storage medias. Pittasoft Co., Ltd. is not
accountable for data loss resulting from carelessness.
Note
yInsert or remove the microSD card only when the product is turned o.
yMicroSD cards are consumables. Replace them with new ones after
prolonged use.
16
Installation
1
In a bright and safe place, stop the vehicle engine and pull out the vehicle
key.
2
Attach the front view camera on the vehicle windshield glass with double-
sided tape.
3
Attach the lens of the rear view camera on the vehicle’s back window with
double-sided tape, so that the lens can also be placed at the center of the
vehicle.
4
Connect the V in terminal of the front view camera to the V out terminal
of the rear view camera by using the cable for connecting to the rear view
camera.
5
Use the power cable to connect the DC in of the front camera to car’s power
socket.
Note
yIt is necessary to use Power Magic (the Battery Discharge Prevention
Device) to record video while the car is parked.
yTo use BlackVue with other equipment that uses a power cable, purchase
and use a dual power outlet adaptor.
BLACKVUE LCD I 17
6
Organize the cables, using the cable clip, to prevent the driver's vision from
being interrupted.
7
Start-up of the vehicle, then check if the product is properly operating.
8
Adjust the camera angle to view the LCD screen. Slightly unfasten the cam-
era angle control bolt to adjust the angle; then fasten the bolt. Even if the
prop is detached, the camera angle can be maintained. Thus, the camera
can be installed at the same lens angle as before.
Caution
yDo not remove the microSD card while it is saving or reading data. This
may cause data damaged or malfunction.
yIf BlackVue is used for the rst time, set time in Settings rst. (Page 29)
Note
yAfter a test drive, check if the video has been properly recorded.
yThe recorded video is saved in MP4 format.
PLEASE CONNECT REAR CAMERA FIRST BEFORE CONNECT THE POWER
CORD ON FRONT CAMERA.
18
Video Recording
Normal Recording
1
Once you start the vehicle engine, the BlackVue will automatically power
on.
2
When the BlackVue is powered on, the normal recording will automatically
start. The video can be checked from the LCD screen.
Parking Recording
1
When in normal recording mode, if the vehicle does not move for five
minutes or longer, the mode will automatically switch to parking recording
mode.
2
In parking recording mode, if camera motion or vehicle impact is detected,
event recording will start.
Note
yIf a le is recorded in parking recording mode, a message will appear on
the LCD screen when the mode switches to normal recording mode.
BLACKVUE LCD I 19
Event Recording
1
During normal recording mode or parking recording mode, if an impact to
the vehicle is detected, event recording will start. 10 seconds before impact
to the vehicle will also be recorded.
Note
yThe degree of sensitivity, which impact detection sensitivity, can be set
in Settings. (Page 29)
Emergency Recording
1
Press the on the LCD screen to record the desired image. The
recorded le will be saved in the form of an event recording le.
Note
yUp to ten emergency recorded les can be saved. If more than ten les
are recorded, the older les will be deleted in chronological order.
yThe emergency recording file can be recorded depending on the file
unit setting. (Page 27)
yThe emergency recording cannot be interrupted during recording.
20
Simple Video Playback
Playback in BlackVue
You can directly check recorded videos from the LCD screen.
1
Press on the LCD screen. A list of recorded videos will appear.
2
From the list, select the recorded video you want to play back.
Note
yWhen playing back a video, a video recording cannot be made using
BlackVue.
BLACKVUE LCD I 21
Playback Using a microSD Card
Playback Using a Smartphone
With a Smartphone that supports microSD cards, a video can be viewed.
1
Turn o the power of this product, and detach the microSD card.
Note
yFor details on how to detach the microSD card, refer to Insert & Remove
the microSD Card. (Page 15)
2
Insert the microSD card into the Smartphone.
3
Run the application for video playback, and select the video you want to play
back.
Note
yA method for playing back recorded videos may dier depending on the
type of Smartphone; therefore refer to your User's Guide for details.
yIf there are numerous recorded videos in the microSD card, it may take a
long time to load the le.
Playback Using a GPS Navigation
Recorded videos can be played back using GPS navigation.
1
Insert the included microSD card into the microSD card reader.
2
Connect the microSD card reader to navigation.
3
Run the video playback program, and select the recorded video you want to
play back from the removable drive.
22
Note
yA method for playing back recorded videos may differ depending on
navigations. For details, refer to the User's Guide on Navigations.
yIf there are many recorded videos in the microSD card, it may take long
to load a le.
ySome navigations do not enable full HD video playback.
Playback Using a PC
Recorded videos can be checked immediately, using the video playback PC
program.
1
Insert the included microSD card into the microSD card reader.
2
Connect the microSD card reader to navigation.
3
Run the video playback program, and select the recorded video you want to
play back from the removable drive.
BLACKVUE LCD I 23
Playback Using the BlackVue App
Wi-Fi is required to play back a video via BlackVue application. For a model that does
not enable Wi-Fi, insert the microSD card into a Smartphone to play back a recording.
1
Install the BlackVue application in a Smartphone, and run the application.
The BlackVue application can be downloaded from Google Play Store, Apple
App Store, or Windows Store.
Note
yThe BlackVue application is enabled in Android 2.3 or higher, iOS 5.0 or
higher, or Windows 8.0.
ySome features may not be enabled depending on the type of
Smartphone.
yThe BlackVue application is optimized for iOS 7.
2
Press Wi-Fi ON on the LCD screen to enable Wi-Fi.
3
Touch the Wi-Fi button of the BlackVue application. Select the device you
want to connect, and enter the password. (E.g. DR750LW-A682DE) Touch
the OK button to connect to the selected device. The initial password is
blackvue, but the user can change it.
24
Note
yIf information on Wi-Fi connection is saved, touch the Wi-Fi button
of the BlackVue application, without enabling the Wi-Fi feature of the
Smartphone, to automatically connect to Wi-Fi.
yFor the Live View function, Wi-Fi can be used within a 10m range,
although the range may vary depending on the circumstances during
use
yWhen playing back recorded videos using Wi-Fi, the reception may vary
according to the data transfer rate.
yFor details on Wi-Fi settings, refer to Wi-Fi and Other Settings. (Page
42)
yWi-Fi will automatically disabled 10 minutes after not being in use. This
cannot be changed.
4
Select the recorded video you want to play back from the list of recorded
videos.
Note
yPress the Live View button to check a video in real-time.
yIf Live View or the VOD playback & copy functions are used by
connecting to Wi-Fi while recording at full HD (1920x1080) @30 fps, the
recording frame will be reduced to 20 fps.
yFor detailed information on the BlackVue application, refer to the Manual
on the BlackVue Application. The manual can be downloaded from the
website of BlackVue (www.blackvue.com).
BLACKVUE LCD I 25
Using the BlackVue
Switch to Live View
The front/rear screen recordings in this product can be checked in real-time.
1
Press on the LCD screen. If the screen is turned o, press the LCD screen
to turn on the screen. Then, press .
2
Whenever is selected, Live View will appear.
Front + Rear PIP
p
Front Screen
p
Rear Screen
Settings
A setting can be changed in BlackVue. Press on the LCD screen.
Note
yWhen selecting settings, no videos can be recorded in BlackVue.
yAfter changing a setting, you must save the changes.
yIf a setting is changed in BlackVue, the setting cannot be changed using
the BlackVue application.
Screen Settings
26
Item Description
Screen Bright The brightness of the LCD screen can be adjusted.
Screen On Time The waiting duration of the LCD screen can be set.
Switch to the Rear
The direction of a rear view camera video can be
changed. The actual file is recorded in the forward
direction.
Touch revision If touch revision is required on the LCD screen, this
option is available.
Video Settings
Item Description
Resolution The resolution of a recorded video can be set.
Front Bright The brightness of a recorded video can be set.
BLACKVUE LCD I 27
Audio Settings
Item Description
Voice Recording Voice recording can be enabled or disabled.
Alarm Volume The BlackVue voice alarm volume can be adjusted.
Note
yPress the Power button briey to enable or disable voice recording.
Recording Settings
Item Description
Normal Recording Enables or disables normal recording mode.
Date/Time Display Turns on or o the date and time display recorded in a
video.
Speed Unit Display Changes the speed unit recorded in a video.
File Unit Changes the unit of saving a recorded video.
P Mode Auto Switch Enables or disables automatic shift to parking mode.
28
Note
yIf Normal Recording and P Mode Auto Switch are set to OFF, only
event recording videos will be saved.
System Settings
Item Description
Reset Settings Initializes settings.
Wi-Fi Info. Wi-Fi connection information (e.g. SSID and password)
can be checked.
Language The language can be checked.
System Info. The model name and rmware version can be checked.
Timezone The time zone can be checked. The time zone setting is
used as information on a recorded video.
BLACKVUE LCD I 29
Time Settings
The current time and time zone can be set. If an external GPS is connected, the time
will be automatically set according to the time zones.
Note
yThe time zone can be changed in the BlackVue Viewer. (Page 39)
yThe time can be synchronized with the smartphone by pressing
Settings > Firmware > Auto Sync on the BlackVue App.
Sensitivity Settings
Item Description
Normal Mode In Normal recording mode, the impact sensitivity can
be set when switching to event recording mode.
Parking Mode In parking recording mode, the impact sensitivity can
be set when switching to event recording mode.
30
Power Settings
Item Description
Min. Working Volt
The minimum operating voltage can be set. In park-
ing recording mode, once the vehicle battery voltage
reaches under the setting value, the power supply will
stop automatically to prevent battery from drainage.
Battery Save Mode
Battery save mode time can be set. In order to prevent
the vehicle battery from drainage, power supply auto-
matically stops after a set period of time.
Note
yIt is necessary to use Power Magic (the Battery Discharge Prevention
Device) to congure the power settings.
SD Card Formatting
The microSD card can be formatted or a format cycle message can be set. If a format
cycle message is set, a message will appear in the cycle when this product is turned
on.
BLACKVUE LCD I 31
Using the BlackVue Viewer
Screen Description
Double-click the BlackVue Viewer icon in the microSD card to run BlackVue Viewer.
In order to install BlackVue Viewer on the PC, connect to the BlackVue website (www.
blackvue.com) and download it.
1
8
4
32
5
6
7
No. Name Description
1
Recorded
Video Playback
Window
Videos can be played back using this window. The
screen can zoom in/out by using a mouse.
2
Language
Setting
If you change the language on playback screen, the
language for BlackVue Viewer can be changed. For
details about language configuration for BlackVue,
refer to the Basic Settings. (Page 39)
3
microSD Card
Formatting
The microSD card connected to the PC can be
formatted.
4
G-Sensor
Information
G-sensor information of video recording can be
conrmed.
5
GPS Information GPS information when the video was recorded can be
checked.
32
No. Name Description
6
Recorded Video
List
Using the file list and map tab, the recorded video list,
including recording location can be conrmed.
Click Front to display only rear view camera les in the
recorded video list. Click Rear to display only front view
camera les in the recorded video list.
: This is an normal recording file and marked
with green in the timeline.
: This is an event and emergency recording le
and marked with orange in the timeline.
: This is a parking mode recording file and
marked with blue in the timeline.
7
Timeline
Videos can be searched by date, hour, minute, or
second of video recording.
For detailed information about Timeline, refer to
Timeline. (Page 34))
8
Playback Option
Button
While playing back recorded video, the screen,
playback speed, and volume can be adjusted. For
detailed information regarding playback option
button, refer to Playback Control. (Page 33))
Note
yIn order to save GPS information while recording a video, connect an
external GPS to BlackVue.
BLACKVUE LCD I 33
Video Playback
Playback Control
A recorded video can be played back in full screen mode or reversed upside down.
The playback speed can be adjusted to fast forward the video.
View Upside-Down
View Front/Rear
Full Screen View
Front/Rear Screen Mode
Playback/Pause Stop Volume Control
Play Previous File
Play Next File
Playback Time
Move Frame (Previous) Playback Speed Control
Move Frame (Next)
Note
yWhile playing back recorded video, double-click the screen to switch
to full screen view mode. Double-click the screen again or press ESC to
return to default view.
yWhile playing back recorded video, use the mouse wheel to zoom in/
out.
yWhile playing back recorded video, right-click the screen to view the 100
% zoom-in screen.
34
Magnifying Glass
You can zoom playback selected portions of recorded video.
Left-click on the screen while playing back recorded video and a partial zoom-in window
will appear.
Move the window to identify the license plate.
Note
yPress Front or Rear, on the recorded video list, to display only front view
camera or rear view camera to enable the magnifying glass feature.
yThe magnifying glass feature is available only in BlackVue Viewer for
Windows.
Timeline
Video can be explored with the date, hr, min, and sec of when a video was recorded.
Year Selection Timeline for Hour Selection
Timeline for Minute Selection Timeline for Second Selection
Month Selection
Note
yIn the date selection area, a date of video recording is marked by a red
circle and the currently-selected date is marked by a yellow circle.
BLACKVUE LCD I 35
File Management
With the recorded video list, a le can be deleted or saved with a dierent name.
1
Select a le from the recorded video list and right-click it.
2
To delete a le, click Delete.
3
To save it with dierent name, click Export and select the option you want.
Note
yWhen you select Sound Off, the voice is removed from the recorded
video to be saved.
4
Click the OK button and select the le name you want, together with the
path.
5
Click the Save button to nish.
36
Verify Files
With the recorded video list, a le can be veried forgery.
1
Select a le from the recorded video list and right-click it.
2
Click Verication and click OK button.
Map Check
The location of video recording can be conrmed on the map.
1
Select a le from the recorded video list and play it back.
2
Click the Map tab.
3
With the +/- button or mouse wheel, the map can be zoomed in/out.
Speed Unit Change
Map Type Selection
Car Location
Map Zoom-In/Out
BLACKVUE LCD I 37
Note
yInternet connection is required to use the map service.
yOnly from recorded les with GPS information, data can be checked.
MyWay Viewer Check
The driving route of the video recording can be checked.
1
From the recorded video list, select and play back the desired le.
2
Press the button. Then, the driving route will be displayed on the map.
3
Double-click the map to play back the video recording from the driving
route, nearest to the spot clicked.
Speed Unit Change
Car Location
Record Starting
Point
Driving Route Currently-Played File
Latitude & Longitude Car Location
Map Type
Selection
38
Note
yInternet connection is required to use the map service.
yOnly from recorded les with GPS information, data can be checked.
Saving as an Image
When playing back a recorded video, the desired part can be saved as an image.
1
From the recorded video list, select and play back the desired le.
2
Press the button on the part to be saved as an image.
Note
yUse Timeline or press the / button to explore the window in
detail.
3
Click the
G
button.
4
Select the desired le name and path. Then, click the Save button.
Note
yJPG and BMP are supported as image le formats.
Image Printing
When playing back a recorded video, the desired part can be saved as an image.
1
From the recorded video list, select and play back the desired le.
2
Press the button on the part to be saved as an image.
Note
yUse Timeline or press the / button to explore the window in
detail.
3
Click the button.
4
Select the printer, and click the OK button.
BLACKVUE LCD I 39
Settings
Basic Settings
Time, video, and recording settings can be changed.
1
Click the
G
button and click the Basic tab.
2
After changing the conguration click Save & Close.
1
23
No. Function Description
1
Time Settings The time zone can be set for location used. The time
zone setting is used as information on a recorded video.
2
Image Settings
The quality and brightness of front/rear recorded
videos can be set. For detailed information on video
recording time, refer to Recording Time. (Page 48))
3
Recording
Settings
Normal Record, Voice Record, Date and Time Display
and Auto Switching to Parking Mode function can
be turned on/o. Speed Unit Display and Record File
Unit can be changed.
4
Language
Setting
The language of BlackVue voice directions can be
changed.
Note
yWith the normal recording function disabled, only event and parking
mode recording videos are saved.
yWith the speed display unit disabled, the vehicle speed is not
displayed when the recorded videos are played back.
yOn microSD cards, older les are deleted rst to create space for newly-
recorded videos in microSD cards. Copy and store important les, such
as event recording, les to other storage media.
yPress the Power button briey to enable or disable voice recording.
40
Time Setting
If an external GPS is not connected, set time manually before use.
If time is not set, the time of a recorded video may not be correctly saved.
1
Format the microSD card, and then upgrade the rmware.
2
Connect to the website of BlackVue (www.blackvue.com), and download
the time setting program.
3
Run the time setting program before setting time.
Note
yWhen setting time, set time when BlackVue power is on. The product
boots approximately 15 seconds after power supply.
yIf an external GPS is connected, time will be automatically set.
Sensitivity Setting
It is possible to set the G-sensor sensitivity to start event recording during normal
recording and the G-sensor & motion detection sensitivity to start event recording
during recording in parking mode, respectively.
1
Click the
G
button and click the Sensitivity tab.
2
Change a setting, and click Save & Close.
Note
yFor details about advanced sensitivity settings, refer to Advanced
Sensitivity Settings. (Page 41)
BLACKVUE LCD I 41
1
2
No. Function Description
1
Sensitivity for
Normal Recording
It is possible to set the G-sensor sensitivity to start
event recording during normal recording.
2
Sensitivity for
Parking Mode
It is possible to set the G-sensor and motion
detection sensitivity to start event recording
during parking recording mode.
Advanced Sensitivity Settings
Sensitivity can be easily set while watching a recorded video.
1
Click the
G
button. Then, click the Sensitivity tab.
2
Click the Advanced Setting button for the desired setting.
3
Play back a recorded video. Save G-sensor information is displayed at the
bottom of the recorded video played back.
42
4
Move the control bar upwards or downwards to adjust the sensitivity range.
If the range is wide, it will be less sensitive. If the range is narrow, it will be
more sensitive.
It is recorded as an event. It is not recorded as an event.
Note
yIf an event recording occurs due to the sensitivity setting while a
recorded video is being played back, the edge of the playback screen
will blink in orange.
5
Change a setting, and click Save & Close.
Wi-Fi and Other Settings
Settings for Wi-Fi, LED indication, and voice announcements can be changed.
1
2
BLACKVUE LCD I 43
No. Function Description
1
Wi-Fi Setting
SSID and the password, which determines whether to
automatically run Wi-Fi and enable WI-Fi connection can
be changed. You can connect to Wi-Fi with the SSID and
password settings in the BlackVue application. If the
password is forgotten, you can reset the password.
2
Other Settings
For video recording status, normal recording mode,
and parking recording mode, the LED indicators can be
turned on/o.
The voice announcement or volume can be changed.
LCD and Protection Settings
The LCD screen, protection for vehicle batteries, and microSD card formatting cycle
can be set.
12
No. Function Description
1
LCD Settings
An LCD setting can be changed. Screen brightness,
screen waiting duration, and rear view camera image
upside-down can be set.
2
Safety Settings Settings for protecting vehicle batteries, the microSD
card format notication cycle can be changed.
44
How to Apply Conguration
Your settings can be applied to the product.
1
Insert the microSD card into the product. For details on how to insert the
microSD card, refer to Insert & Remove the microSD Card. (Page 15))
2
Once power is turned on, your settings will be automatically applied.
Note
yInsert the microSD card only when the product is turned o.
Firmware Upgrade
Connect the microSD card to the PC to upgrade firmware version. The firmware
version can be upgraded with BlackVue application. For details, refer to the BlackVue
Application manual.
1
Connect the microSD card to the PC. For details on how to connect, refer to
Playback Using a PC. (Page 22))
2
Format the microSD card, and connect to BlackVue website (www.blackvue.
com). Then, download the rmware upgrade le, in the form of a zip le.
3
Unzip the le, and copy the BlackVue folder to the microSD card.
4
Insert the microSD card in BlackVue, and turn on the power. Then, upgrade
will automatically occur.
BLACKVUE LCD I 45
Note
yOnce firmware upgrade is completed, all of the settings will be
initialized.
yFor details on how to insert the microSD card, refer to Insert & Remove
the microSD Card. (Page 15)
yInsert the microSD card only when the product is turned o.
Caution
yMake sure that the power is never turned o while rmware upgrade is
in progress.
‘Hancom Inc.’ owns the copyright of the ‘HANDotum / HANDotumB /
HANDotumExt’ font used in DR750LW-2CH rmware.
Product Specications
& Standards
Product Specications
Model Name DR750LW-2CH
Color/Size/Weight
Front: Black / Width 107.2mm x Height 67.5mm x
Thickness 20.5mm / 136g
Rear: Black / Width 67.4mm x Height 27.6mm / 30g
Memory microSD card (16GB / 32GB / 64GB)
Recording Mode
Emergency Recording, Normal Recording, Event Recording
(Impact Detection), and Parking mode Recording
(Motion+Impact Detection)
Ⲽ For Parking mode recording, a battery discharge
prevention device is required.
Camera Front: CMOS Sensor 2 million pixel
Rear: CMOS Sensor 2 million pixel
Viewing Angle Front: Diagonal: 146°; Horizontal: 115°; Vertical: 85°
Rear: Diagonal: 129°; Horizontal: 108°; Vertical: 57°
46
Resolution/Frame
Front Rear
Full HD (1920x1080)
@30Fps
Full HD (1920x1080)
@30Fps
Full HD (1920x1080)
@30Fps
HD (1280x720)
@30Fps
HD (1280x720)
@30Fps
HD (1280x720)
@30Fps
Ⲽ The resolution/frame can be changed.
LCD 4-Inch WVGA (800x480) Touch Screen
Ⲽ Front/rear PIP enabled
Video Compression
Type MP4
Wi-Fi Internal(802.11b/g/n(2.4~2.4835GHz)
GPS External
Microphone Built-In
Speaker Built-In
Ⲽ Voice Announcement
LED Indicators
Front: Front Security LED, Wi-Fi LED, GPS LED,
Recording Status (REC)LED
Rear: Rear Security LED
Sensor 3-Axe Acceleration Sensor
Button
Power Button
Ⲽ Pressing Short: Starts and stops voice recording.
Ⲽ Pressing Long: Turns on or o the power.
Backup Battery Built-In Super Capacitor
Input Power DC 12V-24V
Power Consumption
Max. 10W (Avg. 6.6W)
Ⲽ Depending on the usage condition, it is subject to
change.
Continuous
Power
Cut-O
Voltage 11.8V/12V/22.8V/23.2V can be selected.
Voltage Cut-
O Timer
12 hours/24 hours/36 hours/48 hours/72 hours can be
selected.
Operating Temperature -20C ~ 60C
Storage Temperature -20C ~ 70C
High Temp. Cut-O Approx. 70C
BLACKVUE LCD I 47
Certicates Front: KC, CE, FCC, RoHS, Telec, WEEE
Rear: KC, CE, FCC, RoHS, WEEE
Software
BlackVue Viewer
Ⲽ Windows XP or higher (Windows 8 supported) and Mac
Leopard OS X(10.5) or higher
Application BlackVue Application (Android 2.3 or higher, iOS 5.0 or
higher, and Windows 8.0 or higher)
LED Indicators
LED
State
Recording
State (REC) Wi-Fi GPS Front
Security
Rear
Security
Boot-Up Cross Blinking
Lighting
White
Recording
Emergency
Blinking Red
and Fast
Blinking
White and
Fast
Normal
Blinking
Red Blinking
White
Event
Blinking Red
and Fast
Blinking
White and
Fast
Parking
Blinking
Red
Blinking
White
Wi-Fi ON/OFF Lighting
Blue
Wi-Fi ON/OFF Change Blinking
Blue
GPS ON/OFF Lighting
Green
GPS ON/OFF Change Blinking
Green
Software Control Enabled Disabled Disabled Enabled Disabled
48
Recording Time
Resolution
(Front+Rear)
Item
Full HD + Full HD
@30fps
Full HD + HD
@30fps
HD + HD
@30fps
Memory
Capacity
16 GB 3 HR 20 MIN 3 HR 50 MIN 4 HR 30 MIN
32GB 6 HR 40 MIN 7 HR 40 MIN 9 HR
64GB 13 HR 20 MIN 15 HR 20 MIN 18 HR
Bit Rate Front 6 Mbps 6 Mbps 4 Mbps
Rear 4 Mbps 3 Mbps 3 Mbps
Note
yDepending on your environment, the actual recording duration may
vary.
yDepending on the image quality, the microSD card lifespan can be
shorten.
Before Requesting A/S Service
It is required for users to back up important data regularly from storage device (to other separate media). Depending on the situation, it will be necessary to delete the
data from the internal storage device (component). It might be needed to delete all the data from the product for A/S. So it is required for users to back up important
data by themselves before requesting A/S. For all the A/S products, it is regarded that the user already backed up the data so there is no additional back-up process.
Therefore, it is important to note that we are not responsible for any data lost during A/S.
FCC Compliance Information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void the user’s authority to operated the equipment under FCC rules.
YCK-DR750LW-2CH
Product Warranty
Q
This product is warranted for 1 year from the purchase date. (Accessories Such as Batteries and microSD Cards: Six Months)
Q
Pittasoft Co., Ltd. warrants its products under the Standard on Consumer Dispute Settlement (Announced by the Korea Fair Trade Commission). It is as follows: If a service is requested,
Pittasoft or its designated subcontractor will provide the service.
Product Name (Model Name) Serial No.
Purchase Date Reseller
Customer Information Address / Phone Number
Consumer Damage Type Warranty
Within the Warranty Term After the Warranty Term
Performance/Functional Issues
or Problems Under Normal Use
Conditions
Serious Repair Required Within 10 Days After Purchase Product Exchange/Refund
at Purchase Price
N/A
Serious Repair Required Within One Month After Purchase
Product Exchange
Serious Repair Required Within One Month After Exchange
Product Exchange/Refund
at Purchase Price
Exchange Disabled Refund at Purchase Price
Consumer Damage Type Warranty
Within the Warranty Term After the Warranty Term
Performance/Functional Issues
or Problems Under Normal Use
Conditions
Repair
Enabled
Defects Free Repair
Paid Repair/Paid Exchange/Free Repair
After the Term of Free Warranty
Failure Resulting From the Same Defect (Third Time) After Repair
Product Exchange/
Refund at Purchase Price
Failure (Fifth Time) After the Repair of Failures in Dierent Parts
Repair
Disabled
Loss of a Product Whose Repair was Requested Refund of the Amount Calculated by
Adding 10% to the Fixed Depreciation
Amount (Maximum: Purchase Price)
When repair cannot be conducted due to a lack of spare parts within
the component retention period
When repair cannot be completed with spare parts Product Exchange/
Refund After Fixed Depreciation
1) Malfunction Resulting From Customer Faults
- Malfunction and damage to the product due to your mishandling (e.g. dropping, impact, damage, and forced operation) or
misuse
- Malfunction and damage to the product conducted after you or a third party, not the after-sales service engineer of
Pittasoft repairs alters the product
- Malfunction and damage to the product caused by parts, consumables, or products sold separately, not specied by
Pittasoft
2) Other Cases
- Malfunction due to natural disaster (e.g. re, submersion, and earthquake)
- When consumable parts expire lifespan
- Malfunction due to an external cause
Paid Repair Paid Repair
Q
This warranty is eective only in the country where you purchased this product.
Q
Product exchange or refund is possible only at the seller where you purchased the product.
- RF exposure warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum 20 cm between the radiator and your body.
MEMO
MEMO
MEMO
Name ] Car Dashcam
Manufacturer ] Pittasoft Co.,Ltd. / Korea
Address ] (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul,
153-718, Republic of Korea
Sales Headquater ] Tel: +82-2-6947-4670(#3) ] Fax: +82-2-6947-4699
]e-mail: sales@pittasoft.com