Pittasoft DR750S-2CH Car Dashcam User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3579050
Application ID	ylPNucJKJM+bHblKxxuh1A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	334.05kB (4175592 bits)
Date Submitted	2017-09-25 00:00:00
Date Available	2017-09-25 00:00:00
Creation Date	2017-07-20 11:20:41
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-21 13:54:27
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

DR750S-2CH
BLACKVUE
DR750S-2CH
For manuals, customer support and FAQs go to www.blackvue.com
Important safety information
For user safety and to avoid property damage, read through this manual and follow
these safety instructions to use the product correctly.
yy Do not disassemble, repair, or modify the product yourself.
Doing so may cause fire, electric shock, or malfunction. For internal inspection and
repair, contact the service center.
yy Do not adjust the product while driving.
Doing so may cause an accident. Stop or park your car in a safe place before
installing and setting up the product.
yy Do not operate the product with wet hands.
Doing so may cause electric shock.
yy If any foreign matter gets inside the product, detach the power cord immediately.
Contact the service center for repair.
yy Do not cover the product with any material.
Doing so may cause external deformation of the product or fire. Use the product
and peripherals in a well-ventilated location.
yy If the product is used outside the optimal temperature range (-20°C - 70°C /
-4°F - 158°F), performance can decline or malfunctions may occur.
yy When entering or exiting a tunnel, when directly facing into bright sunlight, or when
recording at night without lighting the quality of recorded video may deteriorate.
yy If the product is damaged or the power supply is cut due to an accident, video may
not be recorded.
yy Do not remove the microSD card while the microSD card is saving or reading data.
yy The data can be damaged or malfunctions may occur.
DR750S-2CH
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protections against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception
which can be determined by turning the equipment off and on, the user is encouraged
to ty to correct the interference by one or more of the following measures.
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and receiver.
yy Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
yy Consult the dealer or an experienced radio, TV technician for help.
yy Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly
approved by the grantee or manufacture could void the user’s authority to operate
such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation of this device.
FCC ID: YCK-DR750S-2CH
BLACKVUE
CAUTION
Any changed or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
CE WARNING
yy Changes and modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
yy It is desirable that it be installed and operated with at least 20cm or more between
the radiator and a person’s body (excluding extremities: hand, wrists, feet, and
ankles).
DR750S-2CH
Disposal of your BlackVue dashcam
1. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities. Contact local authorities to learn about disposal and
recycling options available in your area.
2. The correct disposal of your BlackVue dashcam will help prevent
potential negative consequences for the environment and human
health.
3. For more detailed information about disposal of your BlackVue
dashcam, please contact your city office, waste disposal service or
the shop where you purchased the product.
BLACKVUE
In the box
Check the box for each of the following items before installing the BlackVue dashcam.
Front camera
Quick start guide
Power cord
Cable clips (8 EA)
Double-sided tape
for the Mounting
Brackets
microSD Card
microSD card reader
Rear camera
Rear camera
connection cable
Pry tool
Need help?
Download the manual (including FAQs) and the latest firmware from
www.blackvue.com
Or contact a Customer Support expert at cs@pittasoft.com
DR750S-2CH
At a glance
The following diagrams explain each part of the BlackVue dashcam.
Front camera
118.5 mm
Camera lens
36 mm
55 mm
Lock button
Mounting bracket
Front security LED
: Blinks slowly during normal mode and parking
mode motion detection standby.
: Blinks quickly when (i) an event is being recorded
(impact detected), (ii) manual recording has started,
or (iii) motion is detected in parking mode.
GPS LED
: GPS is on
Speaker
Recording LED
: Blinks orange in normal mode.
: Blinks red when (i) an event is being recorded (impact
detected), or (ii) manual recording has started.
: Blinks green in parking mode when motion is detected.
BLACKVUE
Connectivity details label:
- Default Wi-Fi SSID
- Default Wi-Fi password
- Cloud code
- QR code
Serial number label
Wi-Fi/Internet LED
: Direct Wi-Fi is on.
: Blinks when connected to the internet
(Cloud connected).
Proximity Sensor:
Touch or wave a finger within 20mm of the
sensor to turn on/off audio recording.
Alternatively, it can be set as a manual
recording trigger in the firmware settings.
DR750S-2CH
Rear camera connection port
DC in
(power connector)
Cover
microSD card slot
Wi-Fi / Format button:
-- Press once to turn on/off Wi-Fi.
-- Press and hold for 5 seconds and once voice instructions
start, release the button. Then press once again to
reset the Wi-Fi SSID and password or press and hold for
5 seconds to format the microSD card.
Rear camera
Camera lens
25 mm
31 mm
Mounting bracket
67.4 mm
V out
(Front camera
connection port)
10 BLACKVUE
Rear security LED
: Stays on in all
recordings modes but
can be turned off from
firmware settings.
STEP 1
Install and power up
Install the front camera behind the rear view mirror. Install the rear camera at the top
of the back windshield. Remove any foreign matter and clean and dry the windshield
before installation.
Warning
yy Do not install the product in a location where it can obstruct the driver's field
of vision.
Turn off the engine. Open the cover of the microSD card slot, gently push the
card into the slot until it locks into place and close the cover.
Peel off the protective film from the double-sided tape and attach the front
camera to the windshield behind the rear-view mirror.
DR750S-2CH 11
Adjust the angle of the lens by rotating the body of the front camera. We
recommend pointing the lens slightly downwards (≈10° below horizontal), so as
to record video with a 6:4 road to background ratio.
Peel off the protective film from the double-sided tape and attach the rear
camera to the rear windshield. Adjust the angle of the lens by rotating the body
of the rear camera.
Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear
camera connection cable.
Use the pry tool to lift the edges of the rubber window sealing and molding and
tuck in the rear camera connection cable.
Rear camera connection cable
12 BLACKVUE
Plug the power cord into the cigarette lighter socket and the front camera.
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the
power cord.
Rear camera connection cable
Power cord
Turn on the engine. The BlackVue dashcam will power up and start recording.
Video files are stored on the microSD card.
Turn off the engine. The dashcam will automatically stop recording and power
down. To record in parking mode while the engine is off please install a Power
Magic Battery Pack (sold separately) or a Power Magic Pro (sold separately). A
Power Magic Pro powers your dashcam when the engine is off by hardwiring it
to the automotive battery. A low voltage power cut-off function and a parking
mode timer protect the automotive battery from discharge.
Note
yy When you run the dashcam for the first time the firmware is automatically
loaded onto the microSD card. After the firmware has been loaded onto
the microSD card you can customize settings using BlackVue Viewer on a
computer.
DR750S-2CH 13
STEP 2
Playback
Playing video files on your smartphone (Android/iOS)
Search for the BlackVue app in the Google Play Store or Apple App Store and
install it on your smartphone.
“Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi:
(i) Go to your smartphone’s Settings then select Wi-Fi, and make sure Wi-Fi is
turned on.
(ii) Choose your BlackVue dashcam from the network list. The dashcam’s default
SSID begins with its model number (e.g. BlackVue750S-******).
(iii) Enter the password and tap join.
* To find the default Wi-Fi password, unplug the cables and remove the
front camera from its mount. The default Wi-Fi SSID, password and cloud
code are printed on the dashcam's connectivity details label.
(iv) Open the BlackVue app and select BLACKVUE WI-FI.
14 BLACKVUE
Select the video file you want to play from the video list.
DR750S-2CH 15
Playing video files on your computer (Windows/Mac)
Remove the microSD card from the dashcam.
Open side cover
To remove
Insert the card into the microSD card reader and connect it to a computer.
Download BlackVue Viewer program from www.blackvue.com > Support >
Downloads and install it on your computer.
16 BLACKVUE
Run BlackVue Viewer. To play, select a video and click on the play button or
double click the selected video.
Windows Viewer
Mac Viewer
DR750S-2CH 17
STEP 3
Changing dashcam's time zone, Wi-Fi password and
other settings.
The dashcam's time zone is initially set to (GMT-11). To display the correct time please
select your time zone.
Using your smartphone (Android/iOS)
“Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi (for details see
STEP 2 ‘Playing video files on your smartphone’)
Open the BlackVue app and select BLACKVUE WI-FI.
Tap the
button to access the Firmware settings menu.
(i) Select Basic settings > Time.
(ii) Select your time zone to auto-sync with GPS time or you can set the time and
date manually after enabling Manual time setting.
Go back to the Firmware settings menu and select Wi-Fi > Login credentials, enter
desired Wi-Fi SSID and password and press OK.
18 BLACKVUE
Go back to the Firmware settings menu and configure other desired settings.
Settings that can be changed include video resolution, image quality, video file
duration, sensitivity settings, voice recording on/off, speed unit (km/h,MPH, off),
LEDs on/off, voice guidance volume, Cloud settings etc.
Once settings are configured, tap and tap Save and close.
DR750S-2CH 19
Changing the dashcam's time zone and other firmware settings on
your computer (Windows/Mac)
Run BlackVue Viewer program after connecting dashcam's microSD card to your
computer. Click on the
button (Windows) or the
menu (mac
OS) to open the BlackVue settings panel.
Settings
Windows Viewer
Settings
Mac Viewer
Settings that can be changed include Wi-Fi password, video resolution, image quality,
video file duration, sensitivity settings, voice recording on/off, speed unit (km/h,MPH,
off), LEDs on/off, voice guidance volume, Cloud settings etc.
For more information about changing the settings in BlackVue Viewer, please download
the manual from www.blackvue.com > Support > Downloads.
20 BLACKVUE
STEP 4
Connect to BLACKVUE CLOUD (optional)
If you don’t have a mobile Wi-Fi hotspot, or if you don’t want to use the BLACKVUE
CLOUD service, you can skip this step.
If you have a mobile Wi-Fi hotspot (also known as a portable Wi-Fi router), a carembedded wireless internet network or a Wi-Fi network near your car, you can use the
BlackVue app to connect to BLACKVUE CLOUD and see in real-time where your car is
and the dashcam’s live video feed.
For more information about using the BlackVue app, please download the Cloud
Manual from www.blackvue.com > Support > Downloads.
Create an account
(i) Open the BlackVue app.
(ii) Tap the
button in the top-left corner and select Create account.
(iii) Enter your email address and choose a password. Re-enter your password
and press Next.
(iv) After reading the Terms & Policies, check the boxes and press the Create
account button to continue.
(v) You will receive an e-mail. Click the link in the email to finish creating your
account.
Register your dashcam with your account
(i) In the BlackVue app select BLACKVUE CLOUD and login to your account.
(ii) Tap Yes to enable push notifications (this setting can be adjusted at any time
later).
(iii) Select Register new camera.
(iv) Register your camera using one of the following methods:
DR750S-2CH 21
QR Code: Press Scan QR Code and line up the QR Code on your smartphone’s
screen.
QR code / Cloud code / Serial number
or
Manual registration: Enter your camera’s Serial number and Cloud code and
press Register.
Connect your BlackVue dashcam to a Wi-Fi hotspot for Cloud connectivity
(i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on.
(ii) “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi (for
details see STEP 2 ‘Playing video files on your smartphone’)
(iii) Open the BlackVue app. Select BLACKVUE WI-FI >
22 BLACKVUE
> CLOUD.
(iv) Ensure Enable Cloud service is on. Select Cloud service hotspot settings.
(v) Choose your Wi-Fi hotspot from the list. Enter the password and tap OK.
Note
yy Up to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and
work).
yy The BlackVue DR750S dashcam is not compatible with 5GHz wireless
networks.
DR750S-2CH 23
(vi) Go back to the Firmware settings menu, tap
and tap Save and close.
After rebooting, your dashcam will automatically connect to the Wi-Fi hotspot.
Select BLACKVUE CLOUD from the main screen to access all of the Cloud features.
24 BLACKVUE
Tips for optimal performance
For stable operation of the dashcam, it is recommended to format the SD card
once a month.
Self-format function:
Press and hold for 5 seconds and once voice instructions start, release the button.
Then press once again to reset Wi-Fi SSID and password or press and hold for
5 seconds to format the SD card.
Format using BlackVue Viewer (Windows):
Download BlackVue Windows Viewer from www.blackvue.com > Support >
Downloads and install it on your computer. Insert the microSD card into the
microSD card reader and connect the reader to your computer. Launch the
copy of BlackVue Viewer that is installed on your computer. Click the Format
button, select the card drive and click OK.
Format using BlackVue Viewer (Mac):
Download BlackVue Mac Viewer from www.blackvue.com > Support >
Downloads and install it on your computer. Insert the microSD card into the
microSD card reader and connect the reader to your computer. Launch the
copy of BlackVue Viewer that is installed on your computer. Click the Format
button and select the microSD card from the list of drives in the left frame. After
selecting your microSD card select the Erase tab in the main window. Select
“MS-DOS (FAT)” from the Volume Format drop-down menu and click Erase.
Only use official BlackVue microSD cards. Other cards may have compatibility
issues.
Regularly upgrade the firmware for per formance improvements and
updated features. Firmware updates will be made available for download at
www.blackvue.com > Support > Downloads.
DR750S-2CH 25
Customer Support
For customer support, manuals and firmware updates please visit www.blackvue.com
You can also email a Customer Support expert at cs@pittasoft.com
26 BLACKVUE
Product specifications:
Model Name
Color/Size/Weight
Memory
Recording Modes
Camera
Viewing Angle
Resolution/Frame
Rate
Image Quality
Video Compression
Mode
DR750S-2CH
Front: Black / Width 118.5 mm x Height 36 mm / 90 g
Rear: Black / Width 67.4 mm x Height 25 mm / 25 g
microSD Card (16 GB / 32 GB / 64 GB/ 128 GB)
Normal recording, Event recording (when impact is detected
in normal and parking mode), Manual recording and Parking
recording (when motion is detected)
* For Parking mode recording, a Parking Mode Battery Pack
(Power Magic Battery Pack) or a Parking Mode Hardwiring
Kit (Power Magic Pro) is required.
Front: STARVIS™ CMOS Sensor (Approx. 2.1 M Pixel)
Rear: STARVIS™ CMOS Sensor (Approx. 2.1 M Pixel)
Front: Diagonal 139°, Horizontal 116°, Vertical 61°
Rear: Diagonal 139°, Horizontal 116°, Vertical 61°
Front: Full HD (1920x1080) @ 30 fps
Rear: Full HD (1920x1080) @ 30 fps
* Resolution/frame rate can be changed.
* Frame rate may vary during Wi-Fi streaming.
* Sports Mode:
Front: Full HD (1920x1080) @ 60 fps
Rear: Full HD (1920x1080) @ 30 fps
Highest, High, Normal
MP4
Wi-Fi
Built-in (802.11n (2.4 − 2.4835 GHz))
GPS
Built-in
DR750S-2CH 27
Microphone
Built-in
Speaker
(Voice Guidance)
Built-in
LED Indicators
Front: Recording LED, GPS LED, Wi-Fi LED, Front Security LED
Rear: Rear Security LED
Button
Wi-Fi / Format button:
* Press once to turn on/off Wi-Fi.
* Press and hold for 5 seconds and once voice commands
start, release the button. Then press once again to
reset the Wi-Fi SSID and password or press and hold for
5 seconds to format the microSD card.
Proximity sensor:
Touching the proximity sensor turns on/off audio recording or
triggers manual recording depending on the firmware settings.
Sensor
3-Axis Acceleration Sensor
Backup Battery
Built-in super capacitor
Input Power
DC 12 V - 24 V (DC Plug:
Power Consumption
Avg. 350 mA (4.2 W at 12 V, when GPS and Wi-Fi is On)
Avg. 300 mA (3.6 W at 12 V, when GPS and Wi-Fi is Off)
* Actual power consumption may vary depending on use
conditions and environment.
Operation
Temperature
-20 °C − 70 °C (-4 °F − 158 °F)
Storage
Temperature
-20 °C − 70 °C (-4 °F − 158 °F )
High Temperature
Cut-Off
28 BLACKVUE
(Ø3.5 x Ø1.35), MAX 1 A/12 V)
Approx. 80 °C (176 °F)
Certifications
Front: FCC, CE, RoHS, Telec, WEEE
Rear: FCC, CE, RoHS, WEEE
Software
BlackVue Viewer
* Windows XP or higher and Mac Yosemite OS X (10.10) or higher
Application
BlackVue Application (Android 4.4.2 or higher, iOS 8.0 or
higher)
Others
Adaptive Format Free File Management System
* STARVIS is a trademark of Sony Corporation.
DR750S-2CH 29
Product Warranty
The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/
microSD Card: 6 Months)
We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn
up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request.
Warranty
Circumstances
For serious repair required within 10 days of
purchase
Within the
Term
Exchange/
Refund
For serious repair required within 1 month of
purchase
Exchange
For serious repair required within 1 month of
exchange
Exchange/
Refund
When not exchangeable
For performance/
functional
Repair
problems under (If Available)
normal use
conditions
For Defect
Repair
(If Unavailable)
Refund
Paid Repair/
Paid Product
Exchange
Repeated trouble with different
parts (up to 5 times)
When repair is unavailable due
to lack of spare parts within the
component holding period
N/A
Free Repair
Repeated problem with the
same defect (up to 3 times)
For the loss of a product while
being serviced/repaired
Outside of the
Term
Exchange/
Refund
When repair is unavailable
even when spare parts are
available
1) Malfunction due to customer fault
-- Malfunction & damage caused by user negligence (fall, shock,
damage, unreasonable operation, etc.) or careless use
-- Malfunction & damage after being serviced/repaired by an
unauthorized third party, and not through Pittasoft’s Authorized
Service Center.
Paid Repair
-- Malfunction & damage due to the use of unauthorized components,
consumables, or separately sold parts
2) Other Cases
-- Malfunction due to natural disasters (fire, flood, earthquake, etc.)
-- Expired life span of a consumable part
-- Malfunction due to external reasons
This warranty is only valid in the country where you purchased the product.
Refund after
depreciation
plus an
additional 10%
(Maximum:
purchase price)
Exchange/
Refund after
depreciation
Paid Repair
YCK-DR750S-2CH
DR750S-2CH
©

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:07:20 11:20:41+08:00
Creator                         : Adobe InDesign CC 2015 (Windows)
Modify Date                     : 2017:09:21 13:54:27+09:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:09:21 13:54:27+09:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:58cc2dfa-6a78-4cdd-923d-bbe1a9b2d9f6
Original Document ID            : xmp.did:CBD0088C7B1DE211979F9DB4E0EC945D
Document ID                     : xmp.id:472be01d-6b39-244c-94ad-3e0f61b96240
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:572e4b27-1a6d-2e45-8e26-89331eea9436
Derived From Document ID        : xmp.did:cc1de371-6d3e-a846-90d3-d54b045c7f7f
Derived From Original Document ID: xmp.did:CBD0088C7B1DE211979F9DB4E0EC945D
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2017:07:20 11:20:41+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 31

EXIF Metadata provided by EXIF.tools