Pixel Technology TW-283 Wireless Timer Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3518330
Application ID	fJGwIdfCWaWFJDjCRJWPiw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	444.06kB (5550754 bits)
Date Submitted	2017-08-18 00:00:00
Date Available	2017-08-18 00:00:00
Creation Date	2017-07-19 18:05:41
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2017-07-25 08:36:38
Document Title	User manual
Document Creator	CorelDRAW X6

Wireless Timer Remote Control
TW-2 8 3
El El
User Manual
Overview
First. thanks ior choosing PIXEL highapertormance wireless timer remote control
TW-283 ll leatures simple single shooting, continuous shooting, [BULB] shooting,
delay shooting and timer schedule shooting. With low power consumption LCD screen,
it makes your shooting plan clear and more convenientto use delay shooting and timer
schedule shooting.
Belore using this product, you must read the manual and fully understand how to use
itand ensure that you can easily handlethe operation method and also use it properly
Precautions
A Make sure the batteries are Installed correctly, or It may lead to leak, overheat or Crack
A Before attaching Receiver (TW—ZBSRX), please make sure the camera and Receiver are
powered-on
A When connecting power line and the device, please do not pull and drag
A This product involved in electronic product accessories which may cause the lailure Io use of
this deVice But this possibility is very low.
A Do not put this product in strong vibration. or it may cause laull oithis product.
A Poweroiilhe device and remove the batteries during long periods or non—use
A Do not exposethis product in high temperature locations such as conrined carexposed to
strong direct sunlight, control panel and other overheating places.
A Keep itdry Do not touch this product with wet hand Do not expose this product to wateror
rain, oryou may not be able to use it. 9
A Do notuse it inflammables gas, or it may cause explosion orhre.
A This product involved in battery. Please strictiyioilow the corresponding operations related
to battery, or It may cause explosion or fire
TW 83 lntroduc ion
Usin F K module, its reliability and stability are improved. The application ol 2 AGHz global lree lreouency range
enab es 30 channels lor options
The remote control distance can up to 50M
LCD screen displays channel, battery level and lunction mode which is easy to comprehend and simple to handle
ultratow power consumption under standby mode The powered byAAA oattenes
interchangeable connecting cable lordilierent brand's camera models
Sxpwns simple single shooting, continuous shooting, I BuLB 1 shooting, delay shooting and timer schedule
s ootin
. Available to settmer schedule shooung oysening related parameters.
Item Included
Alteropened the package. please check the below items are included. liany access
sory shown as below is Not included, please contactthe dealer
1 Transmitter(TW-283TX)
3 Shutterconneottng cable
..l pc
1pcs 4. User manualaaaa1 pc
Name of Each Parr
TWa283 Transmitter
TWa283 Receiver
Adaphngwlreless remote conuol technology, it can remote conuol cameras wllh external shutter socket to shoot.
Transmitter(TW-283TX)
co PowerON/OFF/BacklitButton
ID ShiltLeitButton
to Number Reduce Button
to Release Button
GI Set/Confirm Button
to ShiitRightButton
o NumberAdd Button
to TimerSchedule Start/Stop Button
to DisplayScreen
® LEDnghtlndloator
o Batter Cover
to Serial o
to ProductBackSticker
Receiver(TW—283RX)
LED Light indicator
Low Battery icon
Power SWitch/ Channel Reduce Button
Backlit Button/ChannelAdd Button
Channel Display Screen
Battery Cover
Battery oomparement
Signal control Output Port
QuickaMstalled hxed corew
Hot Shoe Lock Nut
Hot Shoe Fixed Mount
56969998889
oco oer a:
l'éihimfllig i
some a
k1 (1) input Plug
rransmiueroispiay Screen <2) Shuttercannect Plué
. QEULFQ ch 7,
TransmitterDisplay Screen
0 Timer Schedule Function Zone
9 Time Display Zone
6 Function Zone
9 Single Shooting icon
6 Continuous Shooting icon
0 BULB Shooting icon
0 Delay Shooting icon
9 Communication Channel Icon
9 Timer Schedule Delay Icon
“3 TlmerSchedule Exposure Time loan
at Tlrrler Shooting Interval Time Icon
E Timer Shooting Numbers loan
‘3 Repeat Timer Schedule Interval Time Icon
E) RepeatTIrTler Schedule Times Icon
De ce stalla on and age
Beiore using, you must read your camera user manual careluilyand understand
camera operation methods and function settings. Because camera iunction settings
may ailect the ellective control oi this device over your camera
Install and Change Batteries
When is in low batte , the letters on the display screen darkens orthe low cattery icon I c: 1
blinks, it shows thatt e batter voltage is lowered to the level that may allect its perlormance
Please ready spare batteries The Transmitter is powered byAAA batteries I
1 Please install batteries correctly to the compartment according to the e and — terminal
otthe batteries
A When installing batteries, please note the
terminal oithe batteries. Faulty operation
will cause the laull of this deVice, or even
damaged to the device or personnel injury
Twas: Transmitter TWrZBJ Receiver
Connect Receiver to Camera
1 Make sure the Receiverls Installed In the right
place And the camera and Receiver are poweredron.
2. First. please insert the input socket oithe shutter
connecting cable to the signal control output socket
oi the Receiver Please make sure the cable is
inserted to the end.
§ 7 R , The remote control may not be able to control the camera it
the connecting cable is NOT inserted to the end
3 Mountlhe camera on thelripod or othermountin bracket Open the protective coveroi your
camera external shutter socket, and then inse shutter socket to camera external shutter
socket in the right place. Please lock the nut if available
, The external shutter socket cimosl cameras have mispiu . roclgap When inserting the socket, please
note the direction to avoid the damage otcarnera externanIJTulter socket.
4. Turn on the Receiverand yourcamera.
Power ONIOFF
oTwezas Transmitter
l PowerOn/OtfTransmitter(TW-ZBSTX) Press power buttonrorio/zqusecto turn
on the Transmitter
2 After powered—on. the timerscedule and communicationchannle that have been
set remain in eiiect
3 The Transmitterstandaby time is 30 mins If no operations perlormed after 30 mins, the
Transmitterwill turn oliautomatically
O TW-283 Receiver
l Press power button[ t') 1ior2 setto turn on the
Receiver, atthistime, the LED light indicatorwlll
blink green light every 2 sec The communication
channel is displayed on screen.
2. Alter poweredaon, the communication channel
that has been set belore remains in elfect.
TwassTransmittor Twezssnocoiver
3. The Receiverwill not turn on oroll automatically. When poweris ON, press the powerbutton
ior 2 sec to turn ofrthe Receiver.
Channel Setting
9 SetTransmitterCommunication Channel (TW-283TX)
l Press Shilt Lelt Button [<1 1 or Shift Right Button[ i> 1 to move the Transmitterlunclion
icon to channel [CH] icon
Press SeUConflrm Button to enter channel setting At this time, channel number will blink
.Adjustchannel numbers by pressing number add button I A 1 or Number Reduce Button
sow
V I-
.Repress Set/Conhrm Button to save current channel setting.
Set Receiver Communication Channel (TW-283RX)
1.Turn on the power, the communication channel is
shown as you have been set beiore by delault
2 Press pct-l1 and [CH-] button atthe same time to
enter channel setting The channel icon [OH] on
the displgy screen will blink. C
3. Press t H to add 1 channel and H- to reduce ,/ ,.
tchanrllel ] [ 1 t’ “\ *
4. Repress [+CH] and [CH-] button at the same time
or ii no operation perlormed ior lo sec to save and exit.
‘Foreflectlve conlrol, the Transmluerand Receiver must sel Io the same channel
Turn on Backlit
erransmitterlrwaaaTxi
Gently press [ one 1button to turn on LCD screen backlit
gReceiver (TWa253RX)
When power is ON, press and hold backlit button[ tot. ]for 2 set toturn on the backlit.
TwezazTrsnsmitier TWcZE3Recelver
, Aiteropenedthe backlit, ltwlll light up all the time il
the operation interval time between two buttons
operations is within 5 sec
» The backlltwlll not turn on orturn oll manually ltvvill
be turned oll automatically il no any operations
perlorm d lore sec
Shoo ng Con I
Shooting Function Select Diagram
at!
TWrZBfl Transmitter TWr2BS Receiver
L LII ‘ L Lil ,1 uuuuuu N LII Li:
D e l; > will >9 @
stutsmrruwm a rims aimed atomistic“ mastermind“
The below usage introduction is based on the operation when the Receiver and camera are
connected properly and powered-on The shooting iunction introduction see below
I Single Shooting
1. When poweris on, move Transmitterlunction icon to single shooting icon [ D]t:ly
pressing shiltleltbutton [ 1
2 Halfapress release button, the Transmitter will send locus signal. The green LED light indicator
on the Transmitterand Receiverwill light up, and the camera is in focusing status until you
release or full-press the button
a Fullapress release button, the red LED light indicatoron the Transmitterand Receiverwill light
up Fullapress and hold this button. the Transmitterwill send shooting signal continuously. The
red LED light indicators on both ol the Transmitterand Receiverwill light up steadily. Camera
will start continuous shooting.
Release the release button, the Transmitter will stop sending signal. Camera WIII stop shooting.
Setcamera iunction setting as[ o 1
When camera Iunctlon setIlng IS [ O I, ll maysrarr: single shooting
When camera function setting is [BULB]. camera will shoot with Bulb tunctlon. It may cause
underexposure oroverexposure 6
Hrs
. When camera iunction setting is[ Co 1 , camera will perlorm onetime or many times delay
shooting
E iuui Shooting
1. When power is ON, move Transmitter iunction icon to BULB shooting icon I BULB 1 by pressing
shilt lelt button I <1 1orshilt right button I >1
2. Haltapress release button. the Transmitter will send locus signal The green LED light
indicator on the Transmitter and Receiver will light up. and the camera is in iocusing status
until you release orfullapress the button.
3 Fullapress and hold this button, the Transmitterwill send BULB signal. The red LED light
indicator starts to blink and time The red LED light indicatorlights up steadily, the Receiver
outputs shooting signal continuously The camera starts to continuous exposure shooting.
4 Repress release button, the Transmitter outputs BULB shooting end signal and exposure
time will be displayed. And then camera will stop exposure shooting
Set camera iunction setting as I BULB]
, mhenvcamera iunction setting is I cl 1 , camera will shoot only once and won‘t perlorm BULB
s be ing
r When camera lunctionsetting is[ u 1, camera will shoot continuously
. When camera iunction setting is [ m 1 , camera will perform delay shooting once
I Delay Shooting
TW-283 delay shooting lunction is applied to set custom delay time and numberoishots.
0 Delay Shooting Setting
l When power is ON, move Transmitterfunctlon icon to delay shooting
,_, ,, icon [ e; 1 by pressing shill leit button [ < 1 orshiit right button [ t> 1 . Press
’ ,_, 3 SET button to enter delay shooting time setting Shooting time value I a;
a blinks, press [ A I to add deiaytime and press [ v 1 button to reduce delay
time. You can set shooting time between 1a595ec.
2. Press I <1 1 button to enter the number of shots setting ofdelay shooting.
This numberofstlots[ 3 i1 blinks, press[ A 1to add numberofstlots and press
in , n 3" [ v 1 button to reduce number oishots. You can setnumberoishots as 159
LI i i. pictures
to 3 Alter setting the parameters, press SET button to save the parameters and
exit.
, Alter entering delay shooting setting, the Transmitterwill save the setting parameters that you set last time
- By pressin shiltlelt button [  Ir‘lou can snitch thesetting between numberol
shots and elayiime
- Gently press I A 1 button once, setting value will be added one press and hold this button, the setting value
will be added quickly, Gently press[ v 1onoe, setting value will be reduced one, press and hold this button,
:3
setting value will be reduced quickly
0 Delay Shooting Operation
1 Move Transmitterlunction icon to delay icon I (o 1 by pressing shifl left button I 1
2. Halfapress release button, the Tmnsmitterwill send locus signal. The green LED light indicator
on the Transmitter and Receiver will light up, and the camera is in iocusing status until
you release oriull-presslhe button
3. Full-press release button, the Transmitterwill send all shooting iniormation to the Receiver.
The Transmitterstarts to delay countdown. and the red LED light indicatoron the Receiver
will blink quickly and enter delay shooting status.
4 Alter the count down is done, the Receiver will output one shooting signal every one second
to control camera to shoot according to the number or shots
5 Beiore the count down is done, repress release button or any buttons on the Receiverwdl
end this time delay schedule operation
- Please setcameralunction setting as o 1
, When camera iunction setting is[ u , itmayshoot continuously
, When camera iunction setting is[ EIILII], camera will shoot with Bulb iunction it may cause underexposure
or overexposure
When camera iunction setting is[ a; 1 , camera will perlorm one time or many times delay shooting
e When camera lens tocusfunction seta$[ M ], halfapress the release button olthe Transmitter, the camera
WIII not perform locus operation
, When camera lens locus lunclion set as[ AF 1, most Cameraswlll not periorm shooting operation ilthey
cannothnd locus point, even they received shooting signal.
" Timer Schedule Shooting
0 TimerSchedule Shooting Diagram
l When power is ON, move Transmitterlunction icon to timer schedule shooting iunction by pressing
shiit left button [ <1 1orshiitnghtbuttoni i> 1
2 Press SET button to enter corresponding setting
a Gently press 1 A 1 button once, setting value will be added one, press and hold this button, the
setting value will be added duickly, Gently press I v 1 once, setting value will be reduced one,
press and hold this button, setting value will be reduced ouickly
, Under timer schedule shooting I Ni loan set l-se pictures, repeat shooting times I N2 1 can set l-se pictures,
and ,7 "Cansetunllniltedtlmes. m
- llyou don't need to repeat timerschedule shooting, please set the repeat interval shooting time and repeat
shooting times asl
OPerform Timer Schedule
1. Move Transmitter iunction icon to any timer schedule icons by pressing shift
leltbuttoni1.
2 Press timer schedule start/slo button [ a 1 The Transmitter will send all
iniormation to the Receiver.A this time, the green LED light indicator on the
Receiver will quick blink twice every 2 seconds it means the Receiver
received the lull iniormation and runs properly. nmer schedule will perlonn
on the Receiver and output control signal to camera.
3 The Transmitter LCD screen will display timer schedule status, but it wont send control command
to the Receiver. it onl lor you to know the running status or the Receiver.
, Belore the timer schedu e is completed, repress the Transmitter timer schedule start/slop button [ a 1 ,then
the Transmitter and Receiver will stop periormin timerschedule
, When the Receiver is perlorming timer schedu e, press any buttons on the Receiver will end this time timer
schedule operation.
Below is the example to showthe operation oitimer schedule shooting:Delay time I DELAY] =5
sec, exposure time [LONG] :l sec, shooting interval I INTVL] :5 sec, shooting numbers [N1] :2,
repeat interval time [REPEAT] :5secrepeat times [N2] :2 times
<— uzenepeammes —>
...nrtAv- . --iriivL-
s-crrnv output
roeus output
a i 23455788’ID11121314151617161920212123242525
FCC STATEMENT
it in.
Now ouna bsctnlslil n c'toi'llanccwlrclcsstlrnc'romaiccontrolTWrzflfi ii abllavoan uosiionr laasccartact ourlocal
anieraryvsiiripirwwwpteinpkcan ’ V" p ’
Pthszsbavlonz ®

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 品色美工
Title                           : 未命名 -1
Create Date                     : 2017:07:19 18:05:41+08:00
Creator Tool                    : CorelDRAW X6
Modify Date                     : 2017:07:25 08:36:38+08:00
Metadata Date                   : 2017:07:25 08:36:38+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:2ef1ad31-1b5b-456d-b0a5-fe370ab36eb0
Instance ID                     : uuid:37f795dd-f02a-4aa9-a565-73fd90795406
Page Count                      : 1
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : 品色美工