Planet Technology Sgsd 1022 Users Manual
SGSW-2840P EMQ-SGSD-1022_1022P_2840_2840P
SGSW-2840 to the manual f005e098-9c85-481b-8faf-3911354ec128
2015-02-06
: Planet-Technology Planet-Technology-Sgsd-1022-Users-Manual-519292 planet-technology-sgsd-1022-users-manual-519292 planet-technology pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Management Security Switch SGSD-1022 / SGSD-1022P SGSW-2840 / SGSW-2840P Quick Installation Guide Table of Contents 1. Package Content........................................................................................... 3 2. Requirements............................................................................................... 4 3. Terminal Setup............................................................................................. 5 4. Logon to the Console.................................................................................... 6 5. Configure IP address..................................................................................... 7 Show the current IP address........................................................................ 7 Configure IP address.................................................................................... 7 6. Start Web Management................................................................................. 9 Login the Managed Switch............................................................................ 9 While IP Address be changed or forgotten admin password – .......................11 Customer Support .....................................................................................12 1. Package Content Thank you for purchasing PLANET Layer 2 Managed Switch, SGSD-1022 / SGSD1022P / SGSW-2840 / SGSW-2840P. Terms of “Managed Switch” means the Switches mentioned titled in the cover page of this Quick installation guide, i.e. SGSD-1022, SGSD-1022P, SGSW-2840 and SGSW-2840P. Open the box of the Managed Switch and carefully unpack it. The box should contain the following items: ó The SGSD / SGSW Managed Switch x 1 ó User’s manual CD x 1 ó Quick installation guide x 1 ó RS232 cable x 1 ó Rubber feet x 4 ó Two rack-mounting brackets with attachment screws x 1 ó Power Cord x 1 If any item is found missing or damaged, please contact your local reseller for replacement. 2. Requirements ó Workstations of subscribers running Windows 98/ME, NT4.0, 2000/XP, MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols. ó Workstation installed with Ethernet NIC (Network Card) ó Serial Port connect (Terminal) t Above PC with COM Port (DB-9) ó Ethernet Port connect t Network cables - Use standard network (UTP) cables with RJ45 connectors. t Above PC installed with WEB Browser and JAVA runtime environment Plug-in Note It is recommended to use Internet Explore 6.0 or above to access SGSD / SGSW Managed Switch. 3. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the SGSD / SGSW Managed Switch. The console port of the SGSD / SGSW Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. SGSD / SGSW Managed Switch PC / Workstation with Terminal emulation software RS-232 Serial Port Serial Port 9600,8,n,1 A terminal program is required to make the software connection to the SGSD / SGSW Managed Switch. Windows’ Hyper Terminal program may be a good choice. The Hyper Terminal can be accessed from the Start menu. 1. Click START, then Programs, Accessories and then Hyper Terminal. 2. When the following screen appears, make sure that the COM port should be configured as: ó Baud: 9600 ó Parity: None ó Data bits: 8 ó Stop bits: 1 ó Flow Control: None 4. Logon to the Console Once the terminal has connected to the device, power on the SGSD / SGSW Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks the login user name and password. The factory default user name and password as following, and the login screen in Figure 4-1 appears. User name: admin Password: admin Figure 4-1 SGSD / SGSW Managed Switch Console Login screen Note 1. For security reason, please change and memorize the new password after this first setup. 2. Only accept command in lowercase letter under console interface. 5. Configure IP address The SGSD / SGSW Managed Switch is shipped with default IP address as following. IP Address : 192.168.0.100 Subnet Mask : 255.255.255.0 To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow: Show the current IP address 1. On “Console#” prompt, enter “show ip interface”. 2. The screen displays the current IP address, Subnet Mask and Gateway. As show in Figure 5-1. Figure 5-1 Show IP information screen Configure IP address 3. On “Console#” prompt, type “configure” to enter the configuration Mode. 4. On “Console (config)#” prompt, enter the following command and press. As show in Figure 5-2. Console(config)# interface vlan 1 Console(config-if)# ip address 192.168.1.100 255.255.255.0 The previous command would apply the follow settings for the switch. IP: 192.168.1.100 Subnet Mask: 255.255.255.0 Figure 5-2 Set IP address screen 5. Repeat step 1 to check if the IP address is changed. If the IP is successfully configured, the Switch will apply the new IP address setting immediately. You can access the Web interface of SGSD / SGSW Managed Switch through the new IP address. Note If you do not familiar with console command or the related parameter, enter “help” anytime in console to get the help description. 6. Start Web Management The following shows how to start up the Web Management of the SGSD / SGSW Managed Switch. Note the SGSD / SGSW Managed Switch is configured through an Ethernet connection, please make sure the manager PC must be set on the same IP subnet address. For example, the default IP address of the SGSD / SGSW Managed Switch is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0. PLANET Managed Switch PC / Workstation with IE Browser RJ-45 / UTP Cable IP Address: 192.168.0.x IP Address: 192.168.0.100 Figure 6-1 IP Management diagram Login the Managed Switch 1. Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP address or that you have just changed in console) to access the Web interface. 2. When the following dialog box appears, please enter the default user name “admin” and password “admin” (or the username/password you have changed via console). The login screen in Figure 6-2 appears. Default User name: admin Default Password: admin Figure 6-2 Login screen 3. After entering the username and password, the main screen appears as Figure 6-3. Figure 6-3 Web Main Screen of SGSD / SGSW Managed Switch 4. Now, you can use the Web management interface to continue the Switch management. The Switch Menu on the left of the Web page let you access all the commands and statistics the Switch provides. Please refer to the user manual for more. 10 Figure 6-4 Switch Menu Note If you do not familiar with switch functions or the related parameter, press “Help icon” anytime in right-top of the Web page to get the help description. While IP Address be changed or forgotten admin password – To reset the IP address to the default IP Address “192.168.0.100” or reset the login account and password to default value. Press the hardware reset button at the front panel about 5 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx. Reset 11 Customer Support Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Website first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address: support_switch@planet.com.tw Copyright © PLANET Technology Corp. 2008. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2008:07:29 10:30:23+08:00 Modify Date : 2008:08:18 11:43:34+08:00 Metadata Date : 2008:08:18 11:43:34+08:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 2983 bytes, use -b option to extract) Instance ID : uuid:e0a8fe8f-97ec-43f4-9d8d-b58b5e5232fb Document ID : adobe:docid:indd:44e055ae-e088-11dc-8aec-974ee9769b77 Rendition Class : proof:pdf Derived From Instance ID : af0a30e2-bc7d-11dc-a423-85bf65c7a7c4 Derived From Document ID : adobe:docid:indd:c9bf67af-4be6-11dc-bc4c-d6c1a6cbdd02 Derived From Version ID : 1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:49C9206383A611DCA3ECAFB1FC24052E, uuid:ae78a56d-52fc-11dd-9b29-000393ba5074, uuid:49C9206383A611DCA3ECAFB1FC24052E, uuid:49C9206383A611DCA3ECAFB1FC24052E, uuid:24b09ad0-52f7-11dd-9b29-000393ba5074, uuid:49C9206383A611DCA3ECAFB1FC24052E Manifest Reference Document ID : uuid:0D1EDC4B61DF11DCBD61A4D9EDF00F6D, uuid:1BE6B76754B211DD8800D6D674E01945, uuid:0D1EDC4B61DF11DCBD61A4D9EDF00F6D, uuid:0D1EDC4B61DF11DCBD61A4D9EDF00F6D, uuid:1BE6B76354B211DD8800D6D674E01945, uuid:0D1EDC4B61DF11DCBD61A4D9EDF00F6D Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 12 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools