Planet Toys Worldwide 3215T27 RC Car User Manual

Download:
Mirror Download [FCC.gov]
Document ID	353762
Application ID	tK78kdui3uP3wgtisz47LA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.23kB (77930 bits)
Date Submitted	2003-09-05 00:00:00
Date Available	2003-09-05 00:00:00
Creation Date	2003-08-13 16:31:57
Document Lastmod	2003-08-13 16:48:03
Document Title	User Manual
Document Creator	HP 9100C Digital Sender
Document Author:	ITS ELECTRIC TOY

#3215 MINI RC HARLEY DAVIDSON MOTORCYCLE ASSORTMENT
START UP
l. CAREFULLY LIFT OFF the PLASTIC blister and unscrew and remove the
motorcycle from the plastic blister,
[Unscrew and REMOVE the battery COVERS on both the controller and THE charging
unit. INSERT 3 “AA“ batteries (not included) into charger unit and 3 “AAA“ batteries
(not included) into controller of the battery compartments. Then REPLACE the battery
COVERS and tighten the screws,
CHARGING THE MOTORCYCLE
LPlace the motorcycle on TOPOF the charging unit HOLDER. GENTLY BUT FIRMLY
PUSH THE MOTORCYCLE INTO POSITION ON THE HOLDER
2.Press the charging button and the charging LED indicator will turn on INDICATING
THE MOTORCYCLE IS CHARGING. The LED indicator will automatically go otl'
when the vehicle is fully charged (approx. 45 seconds).
PLEASE NOTE: a). lfthe batteries inside the controller are low. the LED
light will become dim or NOT LIGHT UPAT ALL, AND YOU WILL NOT
BE ABLE TO CHARGE THE MOTORCYCLE. PLEASE REPLACE
THE BATTERIES.
b). Make sure the BATTERIES HAVE BEEN INSERTED
CORRECTLY (+ OR - ) then preparing TO CHARGE THE
MOTORCYCLE.
c), Rechargeable batteries may get hot and dangerous ifbeing continuously
recharged,
OPERATING THE MOTORCYCLE:
I).Fully extend the CONTROLLER ANTENNA.
2).Press the forward and reverse buttons to make the vehicle move FORWARDS AND
BACKWARDS FOR LEFT AND RIGHT TURNING‘ pull the steering handle bar
respectively. PLEASE NOTE. the motorcycle will turn only when it is moving tot-wards
or backwards.
PLEASE NOTE: a) When operating the controller. please do not touch the antenna. As
the control distance and the speed will both be AFFECTED.
h).IfYOU NOTICE A REDUCTION IN SPEED AND CONTROL, PLEASE
BEGIN RE—CHARGING I’ER THE INSTRUCTIONS ABOVE‘
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user‘s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation‘ This equipment generates. uses and can radiate radio
frequency energy and, ifnot installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular
installation, lfthis equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment offand on. the user is
encouraged to try to correct the interference by one or more ofthe following
measures:
- Reorient or relocate the receiving antenna
. Increase the separation between the equipment and receiver
0 Connect the equipment into an outlet on a circuit different from that to which
the receiver is needed
- Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation ofthc device

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : HP 9100C Digital Sender
Create Date                     : 2003:08:13 16:31:57
Author                          : ITS ELECTRIC TOY
Producer                        : 
Title                           : 
Subject                         : 
Modify Date                     : 2003:08:13 16:48:03+08:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools