Planet Toys 3155T27 Remote Control Transmitter User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	796964
Application ID	rXuInnJTmvjIoVaiKV8wvg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	234.74kB (2934223 bits)
Date Submitted	2007-05-25 00:00:00
Date Available	2007-05-25 00:00:00
Creation Date	2007-04-18 16:24:41
Producing Software	Acrobat 5.0 Image Conversion Plug-in for Windows
Document Lastmod	2007-04-18 16:25:14
Document Title	users manual
Document Creator	Acrobat 5.0 Image Conversion Plug-in for Windows

ITEM#3155
llUlION-Hllllllill
Olllllllllfllill:
illiliiiiillllfliilllilliillfll
illiil liiiHliiiilliiJliii
Fuii Function day Ni=©d WWW
Radio ©©nitr©i| Skateboardeir mmmflm
* IMPORTANT: IF SKATEBOARDER DOES NOT RESPOND PROPERLY, PLEASE
REPLACE THE 9.6V NI-CD BATTERY PACK.
THE MANUFACTURE! is NOT RESPONSIBLE FOR my RADIO on rv INTERFERENCE CAUSED av
UNAUTHORIZED MODIFICATIONS To This EQUIPMENT. sucrl MODIFICATIONS coula volo m:
USER'S Amrlonmr to one“! his comment.
PLEASE DO NOT
RETURN TO STORE
For more information
or questions, please call
Consumer Services:
1-877-FUN-TOYS
(1-877-386-8697)
Colors and decorations may vary.
Keep content details
for future reference.
Manufactured & Dislnbuled by
c 2007 Planet Toys inc.
NY. NY mom
All Rights Reserved
MADE iN CHiNA
www.planettoys.com
TABIE (IE BBNTENTS
PAGE 1 :Table of Contents.
PAGE 2: Features.
PAGE 3: Checklist.
PAGE 4: Charging the 9.6V Ni-Cd 600 MAH Battery Pack.
PAGE 5: Installing the 9.6V Ni-Cd 600 MAH Battery Pack.
PAGE 6: Controller Battery Installation.
PAGE 7: skateboarder Power OnIOff Switch and Antenna Installation.
PAGE 8: Operating the skateboarder: Proper use, Precautions, & Care.
PAGE 9: To Clean Skateboarder's Shirt
Page 10: Cautions and Warnings.
Page 11: Please Note and Troubleshooting.
*The adapter should be periodically examined for conditions
that may result in fire, electric shock, or inljuries to persons.
If such conditions eXistthe adaptor shou d not be used
until it is properly repaired."
- Ready to Run!
- Radio Controlled: Speed,
Direction, & Body Movement!
- Ages 8+
- 2 Frequencies to choose from!
- Rides on Pavement and
Smooth Surfaces!
- Up to a 100 Feet Ran e!
- Pistol Shaped Contro ler.
- Rechargeable Battery &
Charger included!
- 9V Battery for Charger Included.
‘1 clllclillsr
BNARBINB TNE BATIERY PABN
IMPORTANT: THE INCLUDED 9.6V Ni-Cd BATTERY PACK IS
BEFORE USE.
Tow-mtdam-ol. di- mmofmepadrapedrn or- rho-d bdowhm been pour-d In
droneyandmeybloutofploiloight.Mum-Ilmtmndnway.
skateboarder
9V Battery
Controller
Transformer
9.6V NI-Cd Metal
rechargeable Antenna
battery pack Tube
GMMAH x I
IMPORTANT: THE INCLUDED 9.6V Ni-Cd BATTERY PACK IS
NOT CHARGED PRIOR TO SHIPMENT AND MUST BE CHARGED NOT CHARGED PRIOR TO SHIPMENT AND MUST BE CHARGED
BEFORE USE.
Standard ~ ,
1 1 0/1 20 V
Household \
Electrical
Outlet ‘ *
Transformer 2
1 Wire Connector
9.6 V NI-cd
Rechargeable
Battery Pack
600mah
l . First. plug the tranformer into a standard household electrical outlet.
2. Plug the battery wire connector and transformer together.
3. charge the battery pack for 5 hours.when the battery pack feels warm It Is
fully charged.
NOTE: LEAVING THE BATTERY PACK IN THE CHARGER WILL NOT INCREASE THE
LIFE OF YOUR BATTERY.
4. After charging the battery pack. aswell as during its use, it will become warm.
IMPORTANT: Please allow the Battery Pack to cool prior to recharging.
Charging before doing so will greatly reduce the life of the Battery.
INSTAIlINB TNE BA'ITERY PABN
BIINTRIIIIER BATTERY INSTAllATIlIN H
Battery Installation Procedure:
1. Unscrew the battery cover using a Philips
head screwdriver.
2. Lift the battery cover off the battery
compartment unit.
3. Plug in the 9.6V Ni-Cd Rechargeable
battery pack into the white connector
piece.
4. Once the battery pack is secure, place the
cover back on the battery compartment
unit and screw the battery cover
completely back on. ,
Battery Compartment
1.Unscrew battery cover using a
Philips head screwdriver.
2. Lift Battery cover off
3. Plug th 9V battery into battery box.
4. Screw battery cover
completely back on.
BllNTRIIllER ANTENNA INSTAllATllIN
Saw the lnunnl Into the
eonu'olllr.
THE Antenna murder: II A unions ANTENNA. av rliltmumrrl or
unmet: mum vo mo EWIHIEML alum ummouizea
mruunon canto void 110! men-- nunranlrv rd OPERATE me
murmur.
ma muFmEn II not neoaonornta Fan ANY maro on w
"Refinance nausea or mama-rm: maorrrunond to “ill
zaulmsrirr. aunt Milflmm canto vdla WE unaw- Aunialurv
ro owners the sou—near.
' PIIINER IINIIIFE
OPERATING SNATEBIIARBER El
SKATER
Turn the skateboarder on by flicking
the swlth on the bottom of the Skate
Board Into the“0N" position.
REMOTE
Turn on the swltchJ‘he red LED should
Ilght up If the battery is properly
connected.
don-rm wn—l
LEI! will light
whnn controller
in all.
more
PROPER IISE. PREBAIITIIINS. & BARE
FCC CAUTION:
TIlI iialllllntilnr is not llspollslhllfl‘lflhl radii: initrftnrru canard by illnllllaiiudlrtqlllllcy modifiun'on hthil tquipriltrit. Slicll
notifications could void tilt llui‘s authority to npmll tlll tqlliprrlriii.
‘I.V}I|orks Best away from high voltage power lines, large buildings, and
we 5.
2. Hold the Controller antenna up for the best performance.
3.When the product doesn’t respond,s|ows down, or loses range, replace
the batteries.
4. Some owners choose to obtain one or more 9.6V Ni-Cd batteries to\
extend usage.
TII BIEAN SNATEBIIARBER'S SHIRT
BAIITIIINS 8. WARNINGS
1. Remove T-shirt entirely by pulling the
velcro on the back of the skateboarder’s
t-shirt. (See figures A, B, and C).
2. Hand wash T—shirt in COLD water with
mild soap to remove any dirt or stains.
3. DO NOT put the T-shirt back onto the
skateboarder until it is completely drY.
CAUTION:
Do NOT operate the skateboarder where there Is debris no it may cnuu
damage to the tarry.
AVOID hard crashes.
NEVER lglvo the skateboarder or W: controller to any ohlld under the age of 3
years a d. as tho toy contalnl small parts.
Do NOT o low the antenna to get wet, n thll will effect the dlltanoe ol the
control.
"even use chamloals Ilko benzene, alcohol, or thlnner to cioon the Skate-
boarder.
WHEN not In ll“, rlmm QM hilt-riot from tit. conlrolllr Ind skit-bolrdor.
Under NO olrcumstanoe should the S-GV NI—Cd Battery or the provlded BV
battery in dlapond of in a mo. Thla may cause
leakagIe. Inlury, and/or exploslon. Plea“ dispose of NI-cd battery cells
prop-r V-
DO NOT stall the motor during use.
NEVER tho cri- or and the 9.6‘! Rechargeable battory noar flammable
materla whlle chlrg ng, this may cause a fire.
The batteries get hot after use, please do not handle them Immediately after
Ille- Please wilt I Imla whlle before handllng them.
Do NOT rochar e the batto pack If It’s warm to the touch. Allow the battery
I“ k to cool ro racharg ng. Racharglng n worm battery pack will shorten
he rt- of the pack.
nach-rglng butt-tron should be don. by an adult only.
Do NOT charge n damaged, leaklng, hot. or wet battery pack.
DO NOT break or disassemble battery pack.
no NOT on the batto pack or cha or for any other reason other than
charglng and running t e Board shar o" skateboarder.
VlthenQ not In use, the transformer should be unplugged from the electrical
on e .
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation of the device.
Ill PIEASE NOTE 8. TRIIIIBIESNIIIITINB
PLEASE NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment oil and on, the user is encouraged to
try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an oullet on a circuit different from that to
which the receiver is needed.
- Consult the dealer or an experienced radio/TV technician for help
TROUBLE SHOOTING
| Reasons
The batteries inside the radio
control are too weak
Solutions
Replace the new alkaline batteries
Problems There is a weak or low inside the control unit.
reception for the radio control.
The battery inside the
Replace the new alkaline batteries
skateboarder is too weak. inside the skateboarder.
The skateboarder doesn‘t
respond to the radio control. Try playing at another location.
Some other equipment using
Other the same radio frequency could
. . disru tthe radio control.
thfiéwgmfnmfignw Eithe’r’plafy in another location
around the environment or turn 0 the other equipment.
' if you are planning to race your
skateboarder with a friend, make
sure each erson’s skateboarder
is on a di erent frequecny.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:04:18 16:25:14+08:00
Create Date                     : 2007:04:18 16:24:41+08:00
Creator                         : Acrobat 5.0 Image Conversion Plug-in for Windows
Page Count                      : 1
Mod Date                        : 2007:04:18 16:25:14+08:00
Creation Date                   : 2007:04:18 16:24:41+08:00
Producer                        : Acrobat 5.0 Image Conversion Plug-in for Windows
Metadata Date                   : 2007:04:18 16:25:14+08:00

EXIF Metadata provided by EXIF.tools